Fits select 1997-2003 Ford F-150 and Expedition, and 1998-2002 Lincoln Navigator.

The Eibach Pro-Alignment Kit provides the necessary adjustment to restore your vehicle's suspension geometry to factory specifications. This kit is essential for maintaining proper handling and maximizing tire longevity, especially after installing lowering springs or when factory adjustment ranges are insufficient. Engineered for precision and durability, this kit allows for accurate camber and caster settings to ensure a centered steering wheel and stable tracking.

• Part Number: 5.87385K
• System: Suspension Alignment
• Function: Restores factory alignment specs and prevents premature tire wear
• Installation: Direct replacement for OE components; professional alignment recommended after install

The Eibach Pro-Alignment Kit (MPN 5.86250K) fits select 2004-2022 Ford F-150 models including XL, XLT, Lariat, King Ranch, and Raptor.

When lifting or lowering your F-150, the vehicle's suspension geometry is altered, often pushing the wheel alignment outside of factory specifications. This precision camber plate and nut kit provides the additional adjustment range required to bring your truck back into spec, ensuring predictable handling and preventing premature, uneven tire wear. Whether you are correcting geometry on a daily driver or seeking a performance-oriented setup for the track, this kit allows chassis tuners to achieve the exact camber settings needed for maximum tire contact and stability.

• Part Type: Camber Plate/Nut Kit
• Manufacturer Part Number: 5.86250K
• Adjustment Range: Wider range of camber adjustment compared to OE hardware
• Application: Suitable for street, off-road, or track tuning
• Durability: High-strength hardware designed for heavy-duty truck use
• Benefit: Essential for maintaining alignment after installing lowering springs or lift kits

Fits select 2020-2026 Ford Bronco Sport, Escape, and Maverick models.

The Eibach Pro-Alignment Front Camber Bolt kit (MPN 5.81315K) is a critical component for maintaining proper suspension geometry on vehicles with modified ride heights. When you lift or lower your vehicle, the factory camber specifications often become unachievable, leading to poor handling and accelerated, uneven tire wear. These high-strength bolts replace the factory upper strut bolts, providing an expanded adjustment range to return your alignment to OE specifications or to dial in a custom, performance-oriented setup for the street or track.

• Provides +/- 1.75 degrees of front camber adjustment
• Restores proper alignment geometry on lifted or lowered vehicles
• Helps prevent premature tire wear and improves steering stability
• Precision-engineered for a direct replacement of the factory hardware
• Suitable for street, off-road, or track tuning applications
• Manufacturer Part Number: 5.81315K

Fits select 2013-2023 Subaru BRZ and Crosstrek, Toyota 86, and Scion FR-S models. This Eibach Pro-Alignment EZ Camber Bolt kit (MPN 5.81305K) provides the necessary adjustment to correct wheel geometry after installing lowering springs or lift kits.

When vehicle ride height is altered, factory alignment specifications often become unachievable, leading to poor handling and accelerated tire wear. These precision-engineered bolts replace the factory hardware to provide a wider range of camber adjustment, making them an essential upgrade for both daily street driving and track-day tuning. By restoring proper camber alignment, you ensure a larger tire contact patch and more predictable cornering performance.

• Provides increased camber adjustment range for street or track tuning
• Prevents uneven tire wear caused by improper suspension geometry
• Direct replacement for factory hardware
• Precision-manufactured for consistent performance and durability
• Sold as a pair (set of 2)
• Manufacturer Part Number: 5.81305K

Fits select 1997-2024 Toyota Camry, Avalon, Corolla, and Solara, 2005-2016 Scion tC and xB, 2004-2006 Lexus RX330, and 2013-2015 Acura ILX.

The Eibach Pro-Alignment Front Kit provides the precision adjustment needed to correct wheel geometry on vehicles that have been lowered or lifted. When ride height is altered, factory alignment specifications often become unachievable, leading to poor handling and accelerated, uneven tire wear. This precision camber bolt kit replaces the upper factory strut bolt to provide a significantly wider range of adjustment than stock hardware allows.

Whether you are restoring factory specs for a daily driver or seeking a more aggressive, performance-oriented setup for the track, these bolts allow chassis tuners to dial in the exact camber required. The high-strength hardware is designed to withstand the rigors of both street and competitive driving environments.

• Manufacturer Part Number: 5.81290K
• Wider range of camber adjustment compared to factory hardware
• Prevents premature and uneven tire wear caused by improper alignment
• Essential for vehicles with modified suspension heights
• Suitable for both street and track tuning applications
• Includes precision-engineered camber bolts for front axle alignment

Fits select 1994-2026 Acura, BMW, Chevrolet, Ford, Honda, Hyundai, and Mitsubishi models.

When you lower or lift a vehicle, the factory suspension geometry is significantly altered. Often, the change in ride height prevents the wheels from being aligned within factory specifications, leading to accelerated tire wear and compromised handling. The Eibach Pro-Alignment Front Camber Bolt Kit provides the necessary adjustment range to restore your vehicle to OE specifications or allow for custom performance tuning on the street or track.

• Wider range of camber adjustment for maximum handling performance
• Precision-engineered bolts allow for fine-tuned alignment settings
• Helps prevent uneven and premature tire wear on modified vehicles
• Essential for vehicles with aftermarket lowering springs or lift kits

• Manufacturer Part Number: 5.81280K
• Position: Front
• Kit Includes: Front camber bolts and necessary hardware

Fits select 1990-2014 Lexus RX330, Scion xD, and Toyota Camry, Celica, Corolla, MR2, and Solara.

Correcting suspension geometry is critical after lowering or lifting a vehicle. The Eibach Pro-Alignment Camber Bolt Kit (MPN: 5.81270K) provides the necessary adjustment range to return your vehicle to factory specifications or achieve a performance-oriented setup for the street or track.

By replacing the factory bolts with these precision-engineered components, you gain a wider range of camber adjustment. This ensures optimal contact patches, improved handling stability, and prevents premature, uneven tire wear caused by incorrect alignment angles after altering ride height.

• Manufacturer Part Number: 5.81270K
• Enables precise camber adjustment for lowered or lifted vehicles
• Suitable for street or track tuning with a wide adjustment range
• Prevents uneven tire wear and improves handling performance
• Precision-engineered for high strength and durability

Fits select 1993-2026 vehicles from Subaru, Nissan, Ford, Volvo, and more (2.0T / 2.4T / 2.5T). Check the fitment table below to confirm compatibility for your specific model and engine.

Achieving a proper alignment is critical when modifying vehicle ride height. Whether you have lowered your car for better handling or lifted it for utility, these changes often push factory alignment specifications out of reach. The Eibach Pro-Alignment Camber Bolt Kit replaces OEM hardware to provide a significantly wider range of camber adjustment, allowing you to return your vehicle to factory specs or set a custom, performance-oriented alignment.

Engineered for precision and durability, these bolts are essential for both street-driven vehicles and track-focused builds. By correcting the wheel's tilt, you maximize the tire contact patch, improve handling predictability, and prevent the premature, uneven tire wear typically caused by improper camber.

• Manufacturer Part Number: 5.81260K
• Application: Front or Rear (Model Dependent)
• Adjustment Type: Camber
• Suitable for street or track tuning
• Prevents uneven tire wear on modified suspensions
• Compatible Engines: 2.0T / 2.4T / 2.5T

Fits select 1985-2011 Chevrolet, Dodge, Volkswagen, Nissan, Saab, Volvo, and other models (2.3T).

Suspension geometry changes significantly whenever a vehicle is lowered or lifted, often pushing the camber outside of factory specifications. This Eibach Pro-Alignment Camber Bolt Kit provides the necessary adjustment range to restore your alignment to OE standards or to dial in a custom performance setup for the street or track. By correcting excessive negative camber, these precision-engineered bolts help prevent premature and uneven tire wear while restoring predictable handling and stability.

Designed for durability and ease of installation, the 5.81250K kit replaces standard factory hardware that lacks the range of motion required for modified ride heights. It is an essential component for any chassis tuner or enthusiast looking to maximize the tire contact patch and optimize cornering performance.

• Manufacturer Part Number: 5.81250K
• Provides a wider range of camber adjustment for street or track tuning
• Precision-engineered bolts for maximum performance and alignment accuracy
• Essential for lowered or lifted vehicles to prevent uneven tire wear
• Replaces factory mounting hardware for improved suspension flexibility

Fits 2015-2023 Ford Mustang models including EcoBoost, GT, V6, and Shelby GT350/GT350R.

Lowering or lifting an S550 Mustang alters the suspension geometry, often pushing the wheel alignment beyond the range of factory adjustment. The Eibach Precision Alignment Camber Arm Kit (MPN 5.72370K) is designed to solve this issue by providing a significantly wider range of camber adjustment than the OE hardware allows. This kit is essential for restoring factory specifications to prevent premature inner tire wear or for dialing in a custom, high-performance alignment for track use.

By increasing the adjustment range, this kit allows experienced chassis tuners to optimize the tire contact patch, improving both stability and cornering grip. Built for durability and precision, these arms are a direct replacement for the stock units and are suitable for both daily street driving and competitive track environments.

• Wider range of camber adjustment for street or track tuning
• Prevents uneven tire wear on lowered or lifted vehicles
• Precision alignment capabilities for maximum handling performance
• Direct replacement for factory rear camber arms
• Manufacturer Part Number: 5.72370K

Fits select 2007-2020 Nissan 370Z and Infiniti G25, G35, and G37 models.

Lowering your vehicle alters suspension geometry, often making factory alignment specifications impossible to achieve with stock hardware. The Eibach Pro-Alignment Rear Camber / Toe Kit (5.72260K) provides the extended adjustment range required to correct these angles, ensuring optimal handling and preventing premature, uneven tire wear.

Designed for both street and track applications, this precision arm kit allows chassis tuners to dial in performance-oriented settings or return the vehicle to OE specifications. This is an essential component for any lowered Z34 or V36 chassis to maintain a proper tire contact patch and high-speed stability.

• Provides a wider range of camber and toe adjustment than factory hardware
• Precision-engineered arms for maximum performance and durability
• Prevents uneven tire wear on lowered or lifted vehicles
• Suitable for street tuning or competitive track setups
• Manufacturer Part Number: 5.72260K

Fits select 2006-2024 Infiniti G25, G35, G37, M35, M45, Q50, Q60, and Nissan 370Z.

Lowering or lifting a vehicle alters its suspension geometry, often pushing the wheel alignment beyond the range of factory adjustment. The Eibach Pro-Alignment Front Camber Arm Kit (MPN 5.72130K) provides the additional adjustment needed to bring your vehicle back to OE specifications or to dial in a custom, performance-oriented setup. By correcting the camber, this kit improves handling stability and prevents premature, uneven tire wear caused by aggressive ride heights.

Built for both street and track applications, these precision-engineered arms allow chassis tuners to maximize contact patch efficiency. Whether you are daily driving or tuning for the circuit, these arms provide the durability and range required for professional-grade alignment.

• Provides a wider range of camber adjustment compared to factory hardware
• Corrects suspension geometry on lowered or lifted vehicles
• Reduces uneven tire wear and improves directional stability
• Essential for performance chassis tuning and track setups
• Manufacturer Part Number: 5.72130K

Fits select 2002-2012 Nissan Altima, 2003-2008 Nissan 350Z, and 2003-2007 Infiniti G35.

The Eibach Pro-Alignment Rear Toe Adjustment Kit (MPN 5.72055K) provides the necessary range to bring your vehicle back into specification after lowering or lifting. When suspension height is modified, factory toe adjustment ranges often become insufficient, leading to poor handling and rapid tire wear. This precision-engineered bolt kit allows chassis tuners to achieve a precise, performance-oriented alignment for either street or track applications.

• Extended Adjustment Range: Specifically designed for rear toe correction on multi-link suspension systems.
• Prevents Tire Wear: Corrects geometry to stop uneven inner or outer edge scrubbing.
• Durability: High-strength hardware ensures alignment settings remain secure under load.
• Application Specific: Engineered as a direct replacement for factory eccentric bolts to increase tuning capability.

Technical Specifications

• Brand: Eibach
• Product Line: Pro-Alignment
• Part Number: 5.72055K
• Position: Rear
• Adjustment Type: Toe Only

Vehicle Fitment

Fits select 2002-2008 Nissan 350Z, Altima, and Infiniti G35.

Lowering a vehicle significantly alters its suspension geometry, often making it impossible to achieve factory alignment specifications. The Eibach Pro-Alignment Rear Camber and Toe Kit (MPN: 5.72050K) solves this by providing an increased adjustment range. Whether you are correcting the alignment on a street-driven lowered car or setting up a performance-oriented chassis for the track, this kit allows for precise tuning to maximize handling and tire longevity.

• Provides a wider range of camber and toe adjustment than factory hardware
• Essential for restoring proper geometry on lowered or lifted vehicles
• Helps prevent uneven and premature tire wear
• Enables performance-oriented alignment settings for street or track
• Precision-engineered components for maximum durability
• Includes necessary hardware for a complete installation

Vehicle Fitment

Fits select 2005-2014 Ford Mustang models, including Base, Boss 302, Bullitt, GT, and Shelby GT/GT500 variants (3.7L / 5.0L).

When lowering an S197-platform Mustang, the fixed factory panhard bar often pulls the rear axle out of alignment relative to the chassis. The Eibach Precision Alignment Panhard Bar solves this geometry issue, allowing you to re-center the rear axle for improved handling predictability and cornering stability. This adjustable component is essential for any lowered Mustang to restore factory alignment specifications or to set a more aggressive, performance-oriented alignment for the track.

• Re-centers the rear axle under the chassis to correct suspension geometry
• Improves stability during cornering and enhances overall handling predictability
• Provides the adjustment range necessary for precision chassis tuning
• Designed specifically for lowered 2005-2014 Mustang applications
• Manufacturer Part Number: 5.72045K

Fits select 1993-2007 Subaru Impreza models, including Base, L, RS, TS, Outback, and WRX trims. Maintaining proper suspension geometry is critical after lowering or lifting your vehicle to ensure predictable handling and maximum tire longevity.

The Eibach Pro-Alignment kit provides the extended adjustment range necessary to bring your vehicle back to factory specifications when OEM hardware reaches its limit. For enthusiasts looking for a performance edge, this kit allows chassis tuners to dial in more aggressive camber and toe settings for improved cornering grip on the street or track. By correcting the wheel alignment, you effectively prevent the inner-edge tire wear commonly associated with lowered suspension setups.

• Provides a wider range of camber and toe adjustment than factory hardware
• Essential for correcting geometry on lowered or lifted vehicles
• Improves handling response and stability
• Helps prevent premature and uneven tire wear
• Suitable for both daily street driving and track-day tuning
• Manufacturer Part Number: 5.67640K

Fits select 2008-2020 Honda Accord, Acura TL, Acura TLX, and Acura TSX models.

The Eibach Pro-Alignment Rear Camber Kit (MPN: 5.67540K) is essential for maintaining proper suspension geometry after lowering your vehicle. Dropping a vehicle changes its height and can push wheel alignment out of factory specifications, leading to poor handling and premature tire failure. This precision-engineered kit provides the necessary adjustment range to restore camber to OE specs or allow for a more aggressive performance-oriented setup.

Constructed for durability and precision, these camber arms allow experienced chassis tuners to optimize the contact patch for either street or track applications. By correcting excessive negative camber, this kit prevents uneven tire wear and ensures your suspension performs as intended.

• Brand: Eibach
• Series: Pro-Alignment
• Part Number: 5.67540K
• Position: Rear
• Adjustment: Wider range than factory for street or track tuning
• Benefits: Prevents uneven tire wear and restores handling performance

Fits select 2016-2026 Honda Accord, Civic, CR-V, and Acura Integra (1.5L).

When you lower or lift a vehicle, the suspension geometry changes, often pushing wheel alignment beyond the reach of factory adjustment points. The Eibach Pro-Alignment Rear Camber Arm Kit provides the necessary adjustment range to restore your vehicle to factory specifications or to achieve a custom, performance-oriented alignment for the street or track.

These adjustable arms are essential for maintaining handling balance and preventing premature, uneven tire wear on modified vehicles. Engineered for precision and durability, this kit allows for a significantly wider range of camber adjustment compared to original equipment, making it a critical upgrade for any chassis tuner.

• Provides a wider range of camber adjustment for street or track tuning
• Corrects alignment geometry on lowered or lifted vehicles to restore handling
• Prevents uneven tire wear caused by excessive negative or positive camber
• Precision-engineered components for a direct fit and reliable performance
• Manufacturer Part Number: 5.67476K

Fits select 1990-2006 BMW 318i, 318is, 323Ci, 325Ci, 325i, 328Ci, 328i, and 330Ci.

The Eibach Pro-Alignment Rear Camber Arm Kit (5.67110K) is a critical upgrade for vehicles with modified ride heights. When a vehicle is lowered, the factory adjustment range is often insufficient to return the wheels to proper alignment specifications. This precision-engineered kit provides the necessary adjustment range to correct rear camber, ensuring stable handling and preventing premature or uneven tire wear.

Whether you are restoring factory geometry on a street-driven car or an experienced chassis tuner seeking a more aggressive track setup, this kit delivers the precision required for maximum performance. By replacing restrictive factory hardware, the Pro-Alignment kit allows for a wider range of tuning to suit your specific driving needs.

• Provides a wider range of camber adjustment for street or track applications
• Precision-engineered arms ensure maximum performance and alignment stability
• Prevents uneven tire wear caused by aggressive lowering or lifting
• Restores handling characteristics and high-speed stability
• Manufacturer Part Number: 5.67110K

Fits select 1988-2001 Honda Civic, CRX, del Sol, and Acura Integra models.

When you lower your vehicle's ride height, the factory suspension geometry changes, often resulting in negative camber that exceeds original equipment specifications. The Eibach Pro-Alignment Rear Kit (MPN 5.67030K) solves this by replacing the factory rear upper control arms with adjustable precision components. This kit provides the increased adjustment range necessary to bring your alignment back to factory specs or to dial in a custom, performance-oriented setup for the track.

By correcting the camber angle, these arms prevent premature and uneven tire wear while improving the contact patch for better handling and stability. Engineered for durability and precision, these components are essential for any lowered street or track-tuned chassis.

• Provides a wider range of rear camber adjustment compared to stock
• Prevents uneven tire wear caused by lowering or heavy loads
• Precision-engineered camber arms for maximum performance and durability
• Suitable for both daily street driving and track applications
• Direct replacement for factory rear upper control arms
• Manufacturer Part Number: 5.67030K

Fits select 2005-2023 Chrysler 300 and Dodge Challenger, Charger, and Magnum.

When you lower or lift a vehicle, the factory suspension geometry often moves outside the range of original equipment adjustment. The Eibach Pro-Alignment Rear Camber Bushing Kit (MPN 5.66050K) provides the extended adjustment range required to return your vehicle to factory alignment specifications or to dial in a custom, performance-oriented setup. These precision-engineered bushings are essential for maintaining predictable handling and maximizing tire longevity on modified vehicles.

• Provides a significantly wider range of camber adjustment than stock hardware
• Prevents accelerated and uneven tire wear caused by improper camber angles
• Designed for high-performance street use and track-day tuning
• Precision-manufactured bushings ensure consistent suspension geometry under load
• Manufacturer Part Number: 5.66050K

Fits 2009-2022 Dodge Challenger, Dodge Charger, and Chrysler 300.

When lowering or lifting a vehicle, the factory suspension geometry often reaches its adjustment limits, making it impossible to achieve correct alignment specifications. This negatively impacts handling and leads to accelerated, uneven tire wear. The Eibach Pro-Alignment Camber Arm Kit (5.66045K) provides a significantly wider range of camber adjustment than the original equipment (OE) hardware allows.

This kit is essential for both daily drivers and track-focused builds. It allows an experienced chassis tuner to dial in a performance-oriented alignment for maximum cornering grip or simply restore the camber to factory specs for a smoother ride and longer tire life. Precision-engineered for a direct fit, these arms replace restrictive factory components to give you total control over your vehicle's footprint.

• Provides a wider range of camber adjustment for street or track tuning
• Essential for correcting alignment geometry on lowered or lifted vehicles
• Prevents premature and uneven tire wear
• Precision-engineered for maximum performance and durability
• Manufacturer Part Number: 5.66045K

Fits 2005-2023 Toyota Tacoma models including TRD Pro, TRD Off-Road, Pre Runner, and X-Runner.

When lifting or lowering your Tacoma, the suspension geometry changes, often pushing the factory alignment points beyond their adjustment limits. The Eibach Pro-Alignment Front Camber Kit (MPN: 5.25470K) provides the necessary range to bring your alignment back to OE specifications or to dial in a custom performance setup. This kit is specifically designed to improve droop travel, drivability, and tire wear on vehicles with modified ride heights.

Constructed using a hybrid design of tubular and forged steel, these arms are built for durability whether you are on the pavement or the trail. They feature OE-style ball joints for reliable service life and a factory-like fit.

• Provides +/- 2.0 degrees of additional camber adjustment over factory limits
• Improves suspension droop travel on lifted applications
• Hybrid tubular and forged steel construction for maximum strength
• Equipped with high-quality OE-style ball joints
• Sold as a complete pair for the front axle
• Manufacturer Part Number: 5.25470K

Fits 1995-2004 Toyota Tacoma and 4Runner models.

The Eibach Pro-Alignment Front Camber Kit (MPN: 5.25460K) provides the precision adjustment necessary to restore factory-spec front-end geometry. When a vehicle is lifted or lowered, the change in suspension height often pushes camber and caster out of the acceptable range, leading to uneven tire wear and reduced handling stability. This kit replaces factory hardware to allow for the fine-tuning required to maximize tire life and steering response.

• Engineered specifically for first-generation Tacoma and third-generation 4Runner front suspension systems
• Essential for vehicles equipped with aftermarket lift kits or lowering springs
• Restores camber and caster settings to factory or performance-oriented specifications
• High-strength components designed for durability on-road and in off-road environments
• Direct-fit design for reliable installation
• Manufacturer Part Number: 5.25460K

Vehicle Fitment:

• 1995-2004 Toyota Tacoma (Base, DLX, Limited, Pre Runner, S-Runner, SR5)
• 1996-2002 Toyota 4Runner (Base, Limited, SR5)

Eliminate alignment drift and ensure your rear suspension geometry stays exactly where you set it with the BMR Suspension Rear Camber Adjustment Lockout Kit. Specifically engineered for the 2015-2018 Ford Mustang (S550), this kit replaces the factory eccentric adjustment bolts which are prone to slipping under high cornering loads or aggressive launches.

By swapping the factory eccentrics for these fixed lockout plates, you provide a positive mechanical lock for the rear camber setting. This is a critical upgrade for S550 owners who participate in autocross, road racing, or drag racing, where maintaining consistent tire contact patches is the difference between a podium finish and a mid-pack result.

• Fits 2015-2018 Ford Mustang S550 models
• Replaces failure-prone factory eccentric camber bolts with rigid lockout plates
• Prevents alignment changes during high-performance driving
• Heavy-duty steel construction for maximum durability
• Red powdercoat finish for corrosion resistance and visibility
• Manufacturer Part Number: WAK761R