BRExhaust Direct-Fit Replacement Exhaust Kit 106-0203 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0203’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 1987-1996 Ford F-150 4.9L & 1987-1995 Ford F-150 5.0L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0203 includes (5) 2.25in. U-Bolt Clamps and interchanges with OE parts B3YZ-2B452-B. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0203 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

This Part Fits:

EXCEPT eTorque Mild Hybrid System and Full-Time 4 Wheel Drive. The 2.5" diameter Borla(r) High Clearance Climber / Rock Crawler Cat-Back(tm) system for the Wrangler JL is designed with ground clearance in mind. This system is perfect for off-roading, overlanding, and rock crawling. It features the mellow Touring sound with no drone inside the vehicle. The exhaust exits thru a 2.5" brushed T-304 stainless steel turn down tip. This system comes with the Borla(r) no drone guarantee. Each system is built from premium T-304 stainless steel giving you the absolute best in performance and durability and is a direct bolt on designed specifically for the 3.6L engine. Ultra-smooth mandrel bends ensure maximum flow & power, and precision Computer Numerical Control (CNC) manufacturing ensures an accurate fit. Best of all, Borla(r) stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.

• EXCEPT eTorque Mild Hybrid System and Full-Time 4 Wheel Drive
• High Clearance Climber / Rock Crawler design
• Fits JL models

This Part Fits:

2024-2025 includes E-Ray. Developing systems for the C8 Corvette presented BORLA® engineers with unique challenges, but our team was up to the challenge. This 3" inlet Cat-Back® system includes both AFM ('20-'21)/ DFM ('22-'25) valves and NPP dual mode exhaust valves. The S-Type sound delivers a powerful, balanced sound with a deep tone for an exciting driving experience with no drone inside the vehicle. It features our Polyphonic Harmonizer and SwitchFire® technology. BORLA®'S Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, BORLA®'S patented SwitchFire® design truly blends the combustion pulses from both sides of the engine for improved performance and a custom aggressive sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with quad (2 each side) 4" round bright chrome on T-304 stainless steel tips. Systems are also available with black chrome on T-304 stainless steel tips, or carbon fiber tips. The system is constructed using T-304 stainless steel and is backed by our Million Mile Warranty. System ships in 2 boxes. Note: After installation of the BORLA® system, the controllers for the AFM ('20-'21)/ DFM ('22-'25) valves and NPP valves in the exhaust system should be RE-CALIBRATED according to GM Document ID 5406413. BORLA® recommends taking your car to the nearest Chevrolet dealer for the recalibration service.

• Includes AFM ('20-'21)/ DFM ('22-'25) and NPP Valves. Do NOT install on vehicles without O.E. NPP.
• Valve actuator recalibration REQUIRED after installation (Click for details)
• System contains Polyphonic Harmonizer and SwitchFire® Technology
• System ships in 2 boxes

This Part Fits:

EXCEPT Raptor. Add Adapter 60556 for Crew Cab with Standard Bed (6' 7") 156.8" wheelbase, or Adapter 60564 for Ext. Cab with Long Bed (8' 2") 163.7" wheelbase. This 3" into dual 2.25" system features the mellow Touring sound with no drone inside the vehicle and exits through 4" black chrome on T-304 stainless steel tips. Using Borla(r) Stainless Steel Polish p# 21499 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber cloth. A system with bright chrome on T-304 stainless steel tips is also available. Borla(r) Cat-Back(tm) and Axle-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla(r) Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium, high-quality T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, Borla(r) stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.

• Add Adapter 60556 for Crew Cab Standard Bed (156.8") wheelbase vehicles
• Add Adapter 60564 for Extended Cab Long Bed (163.7") wheelbase vehicles
• EXCEPT Raptor models

This Part Fits:

This Part Fits:

This Part Fits:

Huge 2.5-inch stainless mandrel-bent tailpipe with Straight-thru Monster muffler. Flows up to 108 Percent better than stock. No tip included.Huge 2.5 inch stainless mandrel-bent tailpipe. Straight-thru Monster muffler flows up to 108% better than stock. Slashes backpressure. Throaty sound. Constructed of heavy-gauge stainless steel, Banks Monster features a supersized, 2.5 inch tailpipe. Banks Monster muffler, its straight-through performance muffler, is the industry's least restrictive. In comparison tests, Banks muffler flowed 543.2 cfm at 1 psi - a 108% improvement over the stock exhaust's 260.0 cfm. Monster virtually eliminates backpressure from the catalytic converter back, for more power and efficiency - and an authoritative, yet civil, exhaust note. For maximum results, combine with a Banks exhaust manifold available for 1991-2001 Cherokees. Includes: Stainless Monster muffler, Stainless 2.5 inch tailpipe, Mounting hardware.Key Features: Mandrel bent Stainless Steel construction. Virtually eliminates backpressure. Lowers exhaust gas temps. Dramatically improves flow. Maximum Airflow. Huge 2.5 inch stainless mandrel-bent tailpipe. Straight-thru Monster muffler. Flows up to 108% better than stock. No tip included

• Flows up to 108 Percent better than stock
• No tip included

This Part Fits:

Huge 2.5-inch stainless mandrel-bent with Straight-thru Monster muffler. Flows up to 140 Percent better than stock. Includes Chrome or Cerakote Black tip. Cat outlet slip fit. Huge 2.5 inch stainless mandrel-bent tailpipe with a polished or Black tip. Straight-thru Monster muffler flows up to 140 percent better than stock. Slashes backpressure; throaty sound. Constructed of heavy-gauge stainless steel, Banks Monster features a supersized, 2.5 inch tailpipe with a stainless tailpipe tip polished to a mirror finish. Banks Monster muffler, its straight-through performance muffler, is the industry's least restrictive. In comparison tests, Banks muffler flowed 501.2 cfm at 1 psi - a 140 percent improvement over the stock exhaust's 208.6 cfm, and about 44 percent better than the nearest competitor. Monster virtually eliminates backpressure from the catalytic converter back, for more power and efficiency - and an authoritative, yet civil, exhaust note. For maximum results, combine with Banks TorqueTube system. Includes: Stainless Monster muffler; Stainless 2.5 inch tailpipe; Stainless tailpipe tip in polished Chrome or black; Mounting hardware.Key Features: Mandrel bent Stainless Steel construction. Virtually eliminates backpressure. Lowers exhaust gas temps. Dramatically improves flow. Maximum Airflow. Huge 2.5 inch stainless mandrel-bent. Straight-thru Monster muffler. Flows up to 140% better than stock. Includes CERAKOTE Black tip. Cat outlet slip fit

• Flows up to 140% better than stock!
• Includes Cerakote Black Tip

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0176 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0176’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 1998-2006 Lexus LX470 4.7L & 1998-2006 Toyota Land Cruiser 4.7L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0176 includes (4) Ring Gaskets, (1) Ball Flare Clamp and interchanges with OE parts 17403-50150, 17403-50151, 17405-50030, 17450-50050, 17450-50070. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0176 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

At the intersection of sophistication and aggression lies the Touring Edition Exhaust. A 3” T304L stainless steel downpipe-back configuration, the Touring Edition Exhaust is the perfect dose of steel for drivers looking for straight-pipe performance, a deep, sophisticated exhaust note, and zero drone at highway speeds. Featuring an integrated front pipe, bespoke mid pipe resonator, and AWE’s patented drone-canceling solution, 180 Technology®, the Touring Edition delivers a full-bodied, rasp-free K20 soundtrack unachieved by any of its peers. Under boost and heavy throttle, the Touring Edition screams. At highway speeds, drone-free within the cabin -- the best of both worlds. Perfectly engineered and packaged for the FK8 Civic Type R, all backed by AWE No CEL and Perfect Fitment Guarantees.The DualPhase mid pipe deploys additional helmholtz properties further upstream, working in tandem with the 180 Technology®-equipped rear section of the standard Touring Edition Exhaust, to keep harsh, drone-prone frequencies in check when paired to an aftermarket downpipe. Don't have an aftermarket downpipe? You can still equip the DualPhase mid pipe to the factory downpipe for an OEM+ experience. Important fitment notes: The Touring Edition Exhausts include a 3” front pipe. This front pipe is integrated into the design of the exhausts. AWE exhausts are not designed to mate with other aftermarket front pipes. Downpipes, on the other hand, should work just fine (so long as they work with the factory-style flange). Each exhaust comes complete with 4.5” double-walled, slash-cut tips available in chrome silver or diamond black, and feature a stamped AWE logo. All tips are individually adjustable, allowing depth into the bumper to be set according to personal taste.

• Handcrafted from 3” CNC mandrel-bent, U.S.-sourced .065” wall T304L stainless steel
• Features patented drone-canceling 180 Technology®, tuned specifically for the K20
• DualPhase mid pipe engineered for additional sound tuning with aftermarket DPs
• Triple 4.5" double-walled slash-cut tips available in diamond black
• Less is more: clean, straight-through design maximizes performance
• Proudly designed, engineered, and manufactured at AWE in the USA
• Max gains of 5 hp and 9 lb-ft of torque at the wheels
• Bespoke stamped stainless steel trident tip merge
• Direct bolt-on for factory-like simplicity
• Perfect fitment guaranteed
• Integrated front pipe
• AWE No CEL guarantee
• Lifetime Warranty

This Part Fits:

Engineered and handcrafted from CNC mandrel-bent 3" and 2.5" U.S.-sourced .065" wall T304L stainless steel, this 50-state emissions-compliant cat-back exhaust system offers a direct bolt-on, no-cut installation with a factory-matched inlet flange. This system specifically has a dual 4.5” slash-cut tip setup in chrome silver, but is also available with diamond black tips or as the high-clearance BashGuard™ version. It features equal-length front pipes and a bespoke resonated mid-pipe with AWE's patented drone-canceling 180 Technology®, ensuring a signature exhaust note with maximum comfort on the highway. Designed to accommodate the factory retractable BedStep®, this system also provides ample clearance for the gas tank.

• High-clearance BashGuard™ configuration ends after the rear axle making it street-legal, and features a thick reinforced stainless ring on the outlet, built for bashing
• Bespoke resonated midpipe featuring AWE’s patented drone-canceling 180 Technology® for maximum comfort on the highway
• 50-state emissions-compliant 3” catback configuration available with high-clearance BashGuard™ or dual 4.5” tips
• Handcrafted from CNC mandrel-bent 3" U.S.-sourced .065” wall T304L stainless steel
• 4.5” double-walled slash-cut tips available in chrome silver or diamond black
• Less is more: clean, straight-through design maximizes performance
• Factory-matched inlet flange for ease of installation
• Wheelbase extensions are included with every kit
• Direct bolt-on, no cutting required
• AWE Perfect Fitment Guarantee
• Manufactured in-house at AWE
• AWE Lifetime Warranty
• AWE No CEL Guarantee

This Part Fits:

The MagnaFlow Pro Series Filter-Back Performance Exhaust System 17912 utilizes its weight-optimized, durable, corrosion resistant stainless steel design to enhance your 6.7L 2019-2023 Ram with MagnaFlow's signature sound and dyno-tested performance. 17912's 5in. diameter mandrel bent main piping features a muffler delete and terminates in a Single Passenger Side Rear exit with 6in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips. This emissions-legal filter-back exhaust kit has been tuned to create Mild interior and Moderate exterior sound levels. Exhaust system 17912 is emissions-legal and produced using CNC precision robotic manufacturing techniques that result in a direct-fit design that you can install yourself, all backed by MagnaFlow's limited lifetime warranty.

• Throaty, powerful performance sound Magnaflow is famous for
• Throaty/Powerful Performance Sound Magnaflow Is Famous For
• Attention Grabbing Design Thanks To An Aggressive Style
• Intercooled Tips

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0805 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0805’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2013-2019 Ford Taurus 3.5L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0805 includes (1) 2.25in. U-Bolt Clamp, (4) 2.5in. U-Bolt Clamps and interchanges with OE parts DG1Z-5230-B. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0805 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0263 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0263’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0263 includes (1) Donut Gasket, (3) 2.125in. U-Bolt Clamps, (1) Spring Bolt Kit and interchanges with OE parts F37Z-5230-E, F37Z-5230-F, F47Z-5230-A, ZZM8-40-500, ZZM8-40-500A, ZZM8-40-500B. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0263 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits:

dB by CORSA's patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, and a deep aggressive rumble. Computerized; mandrel bent; straight through design for maximum airflow which improves fuel economy and performance.

• The Latest Addition To Corsa Massively Popular Gm Suv Exhaust Line-Up For 2021+ Gm Full Size Suvs
• Features Corsas Patented No Drone; Reflective Sound Cancellation (RSC®) Technology
• Dyno Proven Performance. Unlocks Up To 20 Percent Additional Horsepower And Torque
• Easy Bolt-On Installation; No Cutting Required; Installs In An Hour
• Features Twin 4.0 in. Stainless Steel Dual Wall Pro Series Tips
• Features Corsa Most Popular Sound Level For The Gm Suv; Sport
• Custom Tuned Exhaust System Tuned Specifically For Gm Suvs
• Features Corsa Most Popular Sound Level For The Gm Suv
• Best-In-Class No Drone Quiet Cabin Driving Experience
• Reflective Sound Cancellation (RSC®) Technology
• Made From 304 Stainless Steel Construction
• Features Corsas Patented No Drone
• Limited Lifetime Warranty
• Easy Bolt-On Installation
• No Cutting Required
• Installs In An Hour
• Made In The USA
• Sport

This Part Fits:

Smooth bends, tight packaging, and two attitudes. The SwitchPath™ Exhaust is comprised of handcrafted 3-inch and 2.5-inch U.S.-sourced T304L stainless steel with a valved passenger-side tip outlet. SwitchPath™ retains the factory valve behavior, and obeys the S3’s ECU commands based on throttle input, engine speed, and Drive Select. Sneaking out in the morning or creeping through town? Close the valve. Ready to rip? Toggle into Dynamic and your S3 will sing a signature AWE tune with enhanced crackles that will provoke a firm grin. While the SwitchPath™ is designed to work with the factory controls, if you want to have full control to open or close any time, be sure to check out the AWE SwitchPath™ remote, for push button mood control. And if you ever want to flip to full-rowdy all the time, AWE made it easy to convert between SwitchPath™ and Track Edition if you decide at a later date to change your volume. Easy. AWE SwitchPath™ comes standard with 102mm double-walled, slash-cut tips in your choice of Chrome Silver or Diamond Black, complete with stamped AWE logo. you're looking at the new standard for Audi’s skyrocketing small sedan.

• SwitchPath™ exhausts are available with the AWE SwitchPath™ Remote for push-button mood control (Sold Separately)
• Handcrafted from CNC mandrel-bent 3” and 2.5” U.S.-sourced .065” wall T304L stainless steel
• Max gains of 12 hp and 9 lb-ft of torque at the wheels (turbo-back, stock software)
• 102mm double-walled, slash-cut tips available in Chrome Silver or Diamond Black
• Perfect quality, fitment, performance, tone and options to go around.
• Less is more: clean, straight-through design maximizes performance
• Proudly designed, engineered, and manufactured in-house at AWE
• Direct bolt-on for factory-like simplicity
• Features the AWE No CEL Guarantee
• Perfect fitment, guaranteed
• Lifetime Warranty

This Part Fits:

For those who like their volume like their speed (and want to feel the raw nature of the GRC’s potent 3-cylinder at all speeds) the Track Edition features a non-resonated mid-section (i.e. no 180 Technology®). It’s even louder (in & out) than the Touring Edition, while shaving weight and cost. This version is known to get rowdy in mid-range acceleration/deceleration and cruising, and may be too much for some. For this reason, the Track Edition cannot be returned for sound reasons--you've been warned! The Track Edition boasts a 3” T304L stainless steel downpipe-back configuration that brings out an incredibly rowdy and powerful soundtrack that is nothing short of attention-grabbing. AWE designed three, perfectly fitting (and larger) tips for the GRC: one bespoke 4.5" x 8" oval (double-walled, slash-cut tip and stamped with the AWE logo) in the center, and two 5” double-walled, slash-cut tips left and right. No forced block-off plates or quad setups here - just pure GR look, as intended. When it comes to valves, the rumors are true - they don't matter once you remove the backpressure issues of the stock configuration (and you can't open the valve yourself anyway). So we decided to delete them, save weight, drop price, and make the best sounding exhaust available for the GRC. And in case you're wondering, there's a tailored mount right on the exhaust so you have a solid location to bolt up your factory valve after removing the unnecessary organ. All this supported by AWE’s Perfect Fitment Guarantee, No CEL Guarantee, and Lifetime Warranty.

• Three tips, not four. One bespoke 4.5" x 8" oval double-walled, slash-cut tip in the center flanked by two 5” double-walled, slash-cut tips
• Touring Edition features patented 180 Technology® to keep the 3-cylinder’s frequencies in check at highway speeds
• Handcrafted from 3” U.S.-sourced CNC mandrel-bent .065”-wall T304L stainless steel
• Less is more: clean, non-baffled, straight-through design maximizes performance
• Available as sophisticated Touring Edition or unleashed Track Edition
• 3” inlet to facilitate 3” connections with aftermarket downpipes
• Proudly engineered, designed, and manufactured in-house, in the USA
• Dyno-proven max gains of 3 hp and 1 lb-ft of torque at the wheels
• Direct bolt-on system for factory-like simplicity
• Tailored tri-merge design ensures an even flow
• Featuring the AWE Lifetime Exhaust Warranty
• Single 3” to triple 2.5” catback design
• No Check Engine Light Guarantee
• Perfect fitment, guaranteed

This Part Fits:

Dual full 3" Cat Back configuration tailored for the 3.0TT Z. Featuring a precision-engineered X-pipe and robust resonators built for big boost. Dyno-proven power gains of +6 hp and +14 lb-ft of torque at the wheels (with factory downpipes), and sound tested with and without aftermarket lower downpipes. Here, you’re looking at the Track Edition - which, unlike its Touring Edition sibling, removes AWE’s patented 180 Technology® resonators - the result is more pronounced volume within the cabin during mid-range acceleration/deceleration and cruising speeds. The Track Edition may be too much for many–especially with aftermarket components upstream. Due to this reason, AWE Track Edition Exhausts cannot be returned based on sound preference. You’ve been warned! (But fear not AWE offers simple bolt-on conversion kits if you ever find this setup to be too rowdy!). Each exhaust comes complete with bespoke adapter plates and gaskets to fit AWE’s dual 3” system to factory downpipes (if you’re mating to aftermarket components, this hardware is not needed). The Track Edition comes complete with two 5" chrome silver slash-cut tips, and all necessary hardware for installation - available in diamond black or chrome silver finish, individually adjustable to allow depth into the bumper to be set according to personal taste. All this plus 50 state emissions compliance, AWE’s Fitment Guarantee, No Check Engine Light Guarantee, and the AWE Lifetime Warranty. Please note, this product line is only confirmed to fit US models of the Nissan Z.

• Includes bespoke adapter plates and gaskets to mate dual 3” system to factory downpipes
• Handcrafted from 3” CNC mandrel-bent, U.S.-sourced .065” wall T304L stainless steel
• Dyno-proven max gains of 6 hp and 14 lb-ft of torque at the wheels (factory downpipes)
• Straight-forward install: direct bolt-on for factory-like simplicity
• Designed and engineered for both automatic and manual transmissions
• Proudly designed, engineered, and manufactured at AWE in the USA
• Dual 5” double-walled, slash-cut tips in chrome silver
• X-pipe and robust resonated midpipes keep rasp in check
• Precision X-pipe produces a clean, exotic soundtrack
• Developed with and without aftermarket lower DPs
• Full dual 3” design for the RZ34
• Perfect fitment guaranteed
• AWE No CEL Guarantee
• Lifetime warranty

This Part Fits:

The AWE Touring Edition Cat Back is for drivers who like their BOXER rumble to be deep, hearty, and full of crackles all without any interior drone at cruising speeds. Comprised of 3” T304L stainless steel with a hefty wall thickness of .065”, the Touring Edition features a bullet-style resonator in the mid-pipe and a set of patented 180 Technology® resonators residing in the rear to decimate any drone-prone frequencies from the exhaust note while keeping the flow of power uninterrupted. Thanks to the design and construction of 180 Technology® resonators, the internals will not break down and degrade over time causing tone change. Full-bodied rumble for life from the point of installation. This configuration provides the best ratio of interior refinement and exterior rumble on the market. Each system comes complete with 4" slash-cut tips, with your choice of diamond black or chrome silver. And AWE made it easy to convert from a Touring Edition to a Track Edition, or vice versa, if you decide at a later date to turn it up or turn it down. All this plus 50 state emissions compliance, AWE’s Fitment Guarantee, No Check Engine Light Guarantee, and the AWE Lifetime Warranty.

• Handcrafted from CNC mandrel-bent, U.S.-sourced .065” wall T304L stainless steel
• Proudly engineered, designed, and manufactured in-house at AWE, in the USA
• Features AWE’s patented drone-canceling solution, 180 Technology®
• Conversion Kits available to easily switch between editions
• Less is more: clean, straight-through design maximizes flow
• Max gains of 7 hp and 4 ft-lbs of torque at the wheels
• 4” double-walled, slash-cut tips in chrome silver
• Direct bolt-on for factory-like simplicity
• AWE No Check Engine Light Guarantee
• Deep, aggressive BOXER® tone
• Perfect fitment, guaranteed
• 3" catback configuration
• Lifetime warranty

This Part Fits:

This system produced gains of up to +6 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2 IN - 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.

• 2.5 in. Dia. 409 Stainless Steel
• Factory Hanger Locations
• 2 Year Limited Warranty
• 100% Hand TIG Welded
• 50 State Legal

This Part Fits:

This Part Fits:

The MagnaFlow Ford Bronco Overland Series Cat-Back Performance Exhaust system #19559 is the perfect solution to further improve the off-road utility of your already-capable 2021-2023 Ford Bronco equipped with the 2.7L twin-turbo V6. This cat-back, direct-fit exhaust kit is designed to install easily and fit perfectly thanks to the hard work of the engineers at MagnaFlow's Tech Center, who made detailed 3D scans of the entire vehicle in order to ensure perfect fitment. The advantage of such precise tolerances is that the entire performance exhaust system is mounted closer to the undercarriage of the vehicle than the stock system, resulting in significantly improved ground clearance. #19559 also features 3" main piping that leads to a straight-through muffler before terminating in a single 2.5" high-clearance side exit, which further improves the rear departure angle versus the standard tailpipe. The result of this upgrade is improved rock crawling capability and the ability to get out of tricky situations on the trail more easily. This Ford Bronco exhaust system utilizes a tunable NDT (No Drone Technology) quarter-wave resonator to eliminate unwanted noises at cruising speeds en route to your destination, with the added benefit of improving situational awareness when you're out exploring or camping in the middle of nowhere. Exhaust kit #19559 is engineered to produce MagnaFlow's deep signature exhaust tone at mild interior and moderate exterior sound levels, ideal for enjoying the character of your engine without scaring Mother Nature away. The exhaust system is built to last thanks to the use of precision CNC robotic manufacturing techniques and durable stainless-steel construction, all backed by MagnaFlow's limited lifetime warranty.

• No-Drone-Technology Allows For A Quiet Cabin
• Dyno Proven Performance
• High clearance exit

This Part Fits:

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0631 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0631’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0631 includes (4) 2.125in. U-Bolt Clamps and interchanges with OE parts 1219276, 1357065, 1357755, 1357756, 1357981, 1357982, 271421, 273989, 274061, 274078, 31372147, 31372177, 31372179. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0631 features durable Aluminized Steel construction and is covered by a 2 year warranty.

• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Leaves all emissions equipment intact, maintaining emissions compliance
• Two year, unlimited mileage warranty

This Part Fits: