Fits 2024-2025 Toyota Tacoma Limited, SR5, TRD Off-Road, and TRD Sport models. This ICON Vehicle Dynamics Stage 2 suspension system is engineered to enhance both on-road comfort and off-road capability by correcting front-end geometry and increasing wheel travel.

This kit features tubular upper control arms (UCAs) equipped with the patented Delta Joint PRO, providing 90 degrees of total articulation to eliminate binding during full suspension cycle. The front coilovers are height-adjustable from 1.25 to 3 inches and feature corrosion-resistant CAD-plated bodies with 7/8-inch shafts. To maintain drivetrain reliability at increased lift heights, a front differential drop is included to optimize CV joint operating angles. The rear is supported by triple-rate coil springs that provide 0.5 inches of lift while delivering a soft initial ride and a firm overload rate for superior bottoming resistance. Damping is handled by 2.0 Aluminum Series internal reservoir rear shocks with 5/8-inch shafts, specifically valved for the 2024+ Tacoma chassis.

• Adjustable coilovers provide 1.25-3" front lift height
• Tubular UCAs with Delta Joint PRO (U.S. Pat. 10,731,700) for 90-degree articulation
• Triple-rate rear coil springs provide 0.5" rear lift and improved ride quality
• 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
• CAD-plated coilover bodies with 7/8" shafts and FK Rod End bearings
• 6061 aircraft-grade aluminum CNC-machined components
• Included front differential drop maximizes wheel travel on 4WD models

Fits 2024-2025 Toyota Tacoma (Limited, SR5, TRD Off-Road, TRD Sport).

The ICON Stage 2 suspension system provides a comprehensive performance upgrade for the 2024-2025 Toyota Tacoma, combining adjustable front lift height with precision-engineered components to correct suspension geometry. This system features billet aluminum upper control arms (UCAs) that allow for on-vehicle caster and camber adjustment, ensuring optimal alignment and drivability after lifting. These UCAs are equipped with the patented Delta Joint PRO, which provides 90 degrees of total articulation to eliminate binding during full suspension travel.

To manage the rear, ICON utilizes triple-rate coil springs that deliver a plush ride on-road while providing a firmer overload rate for superior bottoming resistance in technical terrain. The package is rounded out by 2.0 Aluminum Series internal reservoir rear shocks, featuring vehicle-specific valving to balance the truck's performance across all four corners. For 4WD models, an included front differential drop kit ensures CV joints maintain proper operating angles at maximum travel.

• Adjustable front coilovers provide 1.25-3" of lift height
• CNC machined 6061 aircraft-grade billet aluminum UCAs
• Patented Delta Joint PRO (U.S. Pat. 10,731,700) with 90° articulation
• Triple-rate rear coil springs providing 0.5" of rear lift
• Corrosion-resistant CAD-plated coilover bodies with 7/8" shafts
• 2.0 Aluminum Series rear shocks with 5/8" shafts
• FK Rod End bearings for minimal deflection and extended service life
• Front differential drop kit for optimized CV joint angles

Fits 2024-2025 Toyota Tacoma Limited, SR5, TRD Off-Road, and TRD Sport models.

The ICON Stage 1 Suspension System provides a significant upgrade in damping performance and wheel travel for the 2024+ Toyota Tacoma. This system features vehicle-specific valving and adjustable front coilovers, allowing for 1.25 to 3 inches of front lift height to accommodate larger tire packages. By combining 2.5 Series front coilovers with 2.0 Aluminum Series rear shocks, ICON delivers a balanced ride that improves control on technical trails without sacrificing on-road comfort.

Engineered for durability, the kit includes corrosion-resistant CAD plated shock bodies with 7/8-inch induction-hardened shafts and 6061 CNC-machined aluminum components. To protect your drivetrain, a front differential drop bracket is included to maintain proper CV angles at maximum extension. Polyurethane differential mounting bushings replace the soft factory units to limit unwanted movement under heavy load while keeping the front suspension performing at its peak.

• Adjustable front lift height from 1.25" to 3"
• 2.5 Series front coilovers with internal reservoirs and 7/8" shafts
• 2.0 Aluminum Series rear shocks with 5/8" shafts
• Vehicle-specific valving for optimized ride and handling
• FK Rod End bearings for durability and minimal deflection
• Front differential drop maintains proper CV joint angles
• 6061 aircraft-grade aluminum CNC-machined components
• CAD plated shock bodies for superior corrosion resistance
• ICON engineered coil springs for superior vehicle feel

Fits 2023-2025 Toyota Sequoia (SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro).

The ICON Stage 10 Suspension System is the ultimate performance upgrade for the 2023-2025 Toyota Sequoia, engineered to provide 3-4.5 inches of front lift height adjustability. This system centers around ICON VS 2.5 Series remote reservoir front coilovers and rear shocks, both equipped with ICON’s exclusive Compression Damping Dual Speed (CDXS) valves. These valves offer 10 precise, detented settings for both high-speed and low-speed compression, allowing you to dial in handling response and bottom-out control independently.

This comprehensive kit replaces weak factory components with CNC-machined billet aluminum upper control arms and rear links. The UCAs feature the patented Delta Joint Pro, providing up to 90 degrees of total articulation without the binding associated with standard ball joints. The inclusion of an adjustable rear track bar and sway bar drop brackets ensures proper axle alignment and geometry throughout the increased suspension travel.

• Adjustable 3-4.5" front lift height for larger wheel and tire fitment
• 2.5 Series shocks with remote reservoirs for increased oil volume and cooling
• CDXS adjusters for 10-position high and low-speed compression tuning
• Billet aluminum UCAs with Delta Joint Pro (U.S. Pat. 10,731,700)
• Billet aluminum rear upper and lower links for improved articulation
• Dual-rate rear coil springs for optimized ride quality
• On-vehicle adjustable rear track bar for precise axle centering
• Fully rebuildable and re-tunable shock absorbers

Fits 2023-2025 Toyota Sequoia models, including SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro.

The ICON Vehicle Dynamics Stage 8 suspension system provides the ultimate performance upgrade for the third-generation Toyota Sequoia. This comprehensive system is engineered to maximize suspension travel and ground clearance while enabling fitment of up to 35-inch tires. By integrating CNC-machined billet aluminum rear lower links and front upper control arms, this kit increases chassis strength and provides essential on-vehicle adjustability for caster, camber, and pinion angles.

Damping is handled by 2.5 Series remote reservoir front coilovers and 2.5 Aluminum Series rear remote reservoir shocks, which offer increased fluid capacity for superior heat dissipation and consistent performance during high-speed off-road use. The billet front UCAs feature the patented Delta Joint Pro, providing 90 degrees of total articulation to prevent binding at full droop.

• Adjustable front ride height: 3-4.5 inches over stock
• Dual rate rear coil springs provide 2-inch or 4-inch lift depending on factory package
• 2.5 Series front and rear remote reservoir shocks for optimized cooling and control
• Billet aluminum UCAs with Delta Joint Pro (U.S. Pat. 10,731,700) for 90-degree articulation
• Billet aluminum rear lower links allow for on-vehicle pinion angle adjustment
• Fully rebuildable and re-tunable shock absorbers
• Includes front sway bar drop brackets to maintain proper OE link geometry
• Accommodates up to 35-inch tires

The ICON Stage 7 suspension system provides a comprehensive performance overhaul for the 2023-2025 Toyota Sequoia. At the core are ICON V.S. 2.5 Series front coilovers and 2.5 Aluminum Series rear shocks, both equipped with remote reservoirs. These reservoirs significantly increase oil capacity to manage heat and provide consistent damping during aggressive off-road use. The rear shocks feature an internal Bump Zone that adds 20% more damping force at the end of the stroke to prevent harsh bottom-outs.

Strength and alignment are addressed through CNC-machined billet aluminum Upper Control Arms (UCAs). These arms feature the patented Delta Joint Pro (U.S. Pat. 10,731,700), which supports up to 90 degrees of total articulation. Combined with dual-rate rear coil springs and sway bar drop brackets, this system maximizes wheel travel and improves ride quality without overstressing factory components.

• Front ride height adjustable from 3" to 4.5" of lift
• V.S. 2.5 Series remote reservoir front coilovers for superior cooling
• 2.5 Aluminum Series remote reservoir rear shocks with internal Bump Zone
• Billet aluminum UCAs with high-articulation Delta Joint Pro
• Dual-rate rear coil springs provide 2" to 4" of lift based on trim
• Sway bar drop brackets included to reduce link bind
• Fully rebuildable and re-tunable shock absorbers

Fits 2023-2025 Toyota Sequoia models (SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro).

The ICON Stage 7 Suspension System is a comprehensive performance upgrade designed to maximize the off-road capability and on-road handling of the third-generation Toyota Sequoia. This system centers around ICON V.S. 2.5 Series front coilovers and 2.5 Aluminum Series rear shocks, both equipped with remote reservoirs. These reservoirs significantly increase oil volume to dissipate heat, ensuring consistent damping performance during prolonged use in rough terrain. The rear shocks also feature an internal Bump Zone that provides an additional 20% of damping force to control hard bottom-out events.

To optimize suspension geometry at increased ride heights, this kit includes ICON billet aluminum upper control arms (UCAs). These arms feature the patented Delta Joint Pro, providing 90 degrees of total articulation without the noise or maintenance issues of traditional uniballs. The UCAs allow for on-vehicle caster and camber adjustment, ensuring your Sequoia maintains factory-spec alignment and drivability. Dual-rate rear coil springs provide either 0" or 2" of lift depending on the factory package, improving load handling and ride quality.

• Adjustable front ride height from 3-4.5 inches of lift over stock
• 2.5 Series front coilovers with remote reservoirs for superior cooling
• 2.5 Aluminum Series rear remote reservoir shocks with internal Bump Zone
• Billet aluminum UCAs with patented Delta Joint Pro (U.S. Pat. 10,731,700)
• 90 degrees of joint articulation for maximum wheel travel
• Dual-rate rear coil springs for improved performance and stance
• Included sway bar drop brackets to maintain proper linkage geometry
• All ICON shock absorbers are fully rebuildable and re-tunable

Fits 2023-2025 Toyota Sequoia (1794 Edition, Capstone, Limited, Platinum, SR5, and TRD Pro).

The ICON Stage 6 Suspension System is a comprehensive performance upgrade designed to significantly enhance the off-road capability and on-road handling of the 2023-2025 Toyota Sequoia. This system centers on VS 2.5 Series front coilovers with remote reservoirs, providing 3-4.5 inches of adjustable lift height. By increasing the piston area and shock body size to 2.5 inches, this kit achieves up to a 40% increase in suspension travel over factory components. The remote reservoirs increase oil volume and surface area, providing critical heat dissipation to prevent shock fade during aggressive use.

For superior articulation and durability, this system includes ICON tubular front upper control arms equipped with the patented Delta Joint Pro, allowing for 90 degrees of total movement. The rear is supported by dual-rate coil springs and 2.0 Aluminum Series remote reservoir shocks, ensuring a balanced and controlled ride. All ICON shock absorbers in this kit are fully rebuildable and re-tunable, providing a long-term suspension solution for demanding environments.

• 3-4.5" adjustable front lift height over stock
• VS 2.5 Series front coilovers with remote reservoirs
• 2.0 Aluminum Series remote reservoir rear shocks
• Tubular front UCAs with patented Delta Joint Pro (90° articulation)
• Dual-rate rear coil springs for improved load handling and ride quality
• Sway bar drop brackets included to maintain proper link geometry
• Vehicle-specific valving for maximum control and comfort
• Bolt-on design with rebuildable and re-tunable components

Fits 2023-2025 Toyota Sequoia models, including SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro.

The ICON Stage 5 suspension system is engineered for the 2023-2025 Toyota Sequoia owner seeking a balance of refined street manners and high-performance off-road capability. This system centers around ICON 2.5 Series front coilovers and billet aluminum upper control arms (UCAs), paired with V.S. 2.0 Aluminum Series rear remote reservoir shocks. The billet UCAs provide superior strength and allow for on-vehicle caster and camber adjustment to maintain proper alignment geometry after lifting. They feature the patented Delta Joint Pro, providing up to 90 degrees of articulation for maximum wheel travel without the noise or maintenance of traditional spherical bearings.

Damping is handled by internal reservoir 2.5 Series coilovers up front and 2.0 Aluminum Series shocks in the rear. The rear shocks utilize remote reservoirs to increase oil capacity, effectively dissipating heat during extended use on washboard roads or technical trails. Dual-rate rear coil springs provide 0 to 2 inches of lift depending on the factory trim, ensuring consistent ride quality even when the vehicle is loaded with gear.

• Adjustable front ride height from 3-4.5 inches of lift over stock
• Billet aluminum UCAs with patented Delta Joint Pro (U.S. Pat. 10,731,700) for 90-degree articulation
• 2.5 Series front coilovers with internal reservoirs for superior damping
• V.S. 2.0 Aluminum Series rear shocks with remote reservoirs for cooler operating temperatures
• Dual-rate rear coil springs provide 0" or 2" lift based on OE suspension package
• Sway bar drop brackets included to maintain factory link geometry and reduce bind
• Fully rebuildable and re-tunable shock absorbers
• Complete bolt-on installation with no overstressing of OE components

Fits 2023-2025 Toyota Sequoia (SR5, Limited, Platinum, Capstone, TRD Pro, and 1794 Edition).

The ICON Vehicle Dynamics Stage 4 suspension system for the 2023-2025 Toyota Sequoia provides a comprehensive handling upgrade designed for both technical off-road terrain and improved highway manners. This system centers on ICON 2.5 Series threaded-body front coilovers, offering adjustable front lift heights from 3 to 4.5 inches. By increasing front-end ride height, this kit allows for the fitment of up to 35-inch tires while correcting the factory rake for a leveled stance.

The Stage 4 kit distinguishes itself with the inclusion of CNC-machined billet aluminum upper control arms (UCAs). These arms feature the patented Delta Joint Pro (U.S. Pat. 10,731,700), providing 90 degrees of total articulation to prevent binding during maximum suspension travel. The UCAs allow for on-vehicle caster and camber adjustment, ensuring optimal alignment specs and drivability after lifting. To maintain rear stability, the kit includes dual-rate coil springs and nitrogen-charged 2.0 Aluminum Series monotube shocks with internal reservoirs.

• Adjustable front lift height from 3" to 4.5" over stock
• Billet aluminum UCAs with on-vehicle caster/camber adjustment
• Patented Delta Joint Pro with 90 degrees of total articulation
• V.S. 2.5 Series front coilovers with internal reservoirs for superior damping
• 2.0 Aluminum Series rear shocks provide a balanced, vehicle-specific tune
• Dual-rate rear coil springs provide 2" or 4" of lift (depending on OE package)
• Sway bar drop brackets included to reduce bind in factory links
• Fully rebuildable and re-tunable shock absorbers
• Accommodates up to 35" tires

Fits 2022-2025 Toyota Tundra 1794 Edition, Limited, Platinum, SR, SR5, and TRD Pro models.

The ICON Stage 11 Suspension System is the definitive performance upgrade for the 2022-2025 Toyota Tundra, providing between 1.25" and 3.5" of front lift height. This system features VS 2.5 Series remote reservoir front coilovers and rear shocks, all equipped with ICON’s Compression Damping Control (CDC) Valves. These valves provide 10 levels of externally adjustable compression damping, allowing you to optimize ride quality for everything from highway towing to aggressive off-road use.

To handle the increased wheel travel—up to a 40% increase over stock—this kit includes billet aluminum front upper control arms (UCAs) equipped with the patented Delta Joint Pro, offering 90 degrees of articulation. The rear suspension is completely overhauled with triple-rate coil springs, billet aluminum upper and lower links for pinion angle adjustment, and an adjustable track bar to ensure the rear axle remains perfectly centered.

• VS 2.5 Series remote reservoir front coilovers and rear shocks
• ICON CDC Valves with 10 compression damping force ranges
• Billet aluminum UCAs with Delta Joint Pro (U.S. Pat. 10,731,700)
• Triple-rate rear coil springs (.75" lift on TRD models)
• Billet aluminum rear upper and lower links for pinion adjustment
• On-vehicle adjustable rear track bar
• Up to 40% increase in front wheel travel
• Vehicle-specific valving and 2.5-inch shock bodies for heat dissipation
• Fully rebuildable and re-tunable shock absorbers
• Includes sway bar drop brackets to reduce link bind

Fits 2022-2025 Toyota Tundra (SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro).

The ICON Stage 11 Suspension System is a comprehensive handling solution designed to maximize the off-road capability and on-road manners of the 2022-2025 Toyota Tundra. This system centers on VS 2.5 Series remote reservoir front coilovers and rear shocks, featuring 2.5-inch shock bodies that increase piston area and oil volume for superior damping and heat dissipation. The integrated Compression Damping Control (CDC) Valves offer 10 user-adjustable settings, allowing you to fine-tune compression force for varying terrain and cargo loads.

To ensure proper suspension geometry and durability at increased ride heights, this kit includes ICON billet aluminum upper control arms (UCAs) equipped with the patented Delta Joint Pro, providing 90 degrees of total articulation. The rear suspension is fully optimized with billet aluminum upper and lower links for improved articulation and pinion angle adjustment, while an adjustable track bar properly centers the axle. Triple-rate rear coil springs provide a 0.5-inch lift (on non-TRD models) and a balanced tune with the front coilovers.

• 1.25-3.5" adjustable front lift height; 0.5" rear lift
• VS 2.5 Series shocks with remote reservoirs and CDC Valves (10 settings)
• Billet aluminum UCAs with Delta Joint Pro (90° total articulation)
• Billet aluminum rear upper and lower links for on-vehicle pinion adjustment
• On-vehicle adjustable rear track bar for axle centering
• Triple-rate rear coil springs improve ride quality and performance
• Up to 40% increase in front wheel travel over stock
• Included sway bar drop brackets to reduce link bind
• All shocks are fully rebuildable and re-tunable

Fits select 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia (including 1794 Edition and TRD Pro) models. This Stage 10 suspension system provides the ultimate level of performance and adjustability, utilizing ICON VS 2.5 Series remote reservoir front coilovers and matching 2.5 Aluminum Series rear shocks to deliver up to a 40% increase in wheel travel over factory components.

This system is centered around ICON’s Compression Damping Control (CDC) Valve technology. These externally adjustable valves restrict oil flow into the reservoir, allowing for 10 distinct compression damping settings to fine-tune your ride for anything from high-speed desert washouts to heavy towing. The included tubular front Upper Control Arms (UCAs) feature the patented Delta Joint Pro, which provides up to 90 degrees of total articulation while correcting suspension geometry for improved alignment and drivability at lifted heights.

To complete the package, ICON includes tubular rear upper and lower links for improved articulation and pinion angle adjustment, along with sway bar drop brackets to reduce bind in the OE links. Every shock in this kit is fully rebuildable and re-tunable to ensure a lifetime of service.

• Adjustable front lift height of 2-3.5" over stock
• VS 2.5 Series shocks with remote reservoirs for increased oil volume and heat dissipation
• ICON CDC Valves for 10-position compression damping adjustment
• Tubular front UCAs with Delta Joint Pro (U.S. Pat. 10,731,700) for 90-degree articulation
• Tubular rear upper and lower links for superior strength and pinion adjustment
• Allows for up to 40% increase in front wheel travel
• Fully rebuildable and re-tunable shock absorbers
• Includes sway bar drop brackets for reduced bind

Fits select 2022-2025 Toyota Tundra and Sequoia models, including TRD Pro, 1794 Edition, Limited, Platinum, SR, and SR5 trims.

The ICON Stage 10 suspension system is the ultimate performance upgrade for the 2022-2025 Tundra and Sequoia platform, engineered to deliver up to 3.5 inches of front lift and a 40% increase in wheel travel. This system centers on ICON VS 2.5 Series remote reservoir front coilovers and rear shocks, providing superior damping and heat dissipation for sustained off-road use. Each shock is equipped with ICON’s Compression Damping Control (CDC) Valves, offering 10 externally adjustable settings to fine-tune ride quality for any terrain or load.

Strength and geometry are handled by ICON billet aluminum front upper control arms (UCAs), featuring the patented Delta Joint Pro for 90 degrees of articulation. To further refine the drivetrain and rear suspension, this kit includes billet aluminum rear upper and lower links that allow for on-vehicle pinion angle adjustment. The inclusion of sway bar drop brackets ensures the factory links operate without binding, resulting in a balanced, high-performance suspension setup that is fully rebuildable and re-tunable.

• VS 2.5 Series coilovers with 2.5-inch shock bodies for increased piston area and oil volume
• Remote reservoirs on all four corners for maximum heat dissipation and fade resistance
• CDC Valves provide 10 levels of compression damping adjustment
• Billet aluminum UCAs with Delta Joint Pro (U.S. Pat. 10,731,700) for superior strength and articulation
• Billet rear upper and lower links for precise rear end alignment and pinion adjustment
• Adjustable front ride height from 1.25 to 3.5 inches over stock
• Vehicle-specific valving for optimized on- and off-road performance
• Included sway bar drop brackets to reduce binding

Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia models (including TRD Pro and 1794 Edition).

The ICON Stage 9 Suspension System provides a complete performance overhaul for the Toyota Tundra and Sequoia platform. This system is centered around VS 2.5 Series remote reservoir front coilovers and rear shocks, all featuring ICON’s exclusive Compression Damping Dual Speed (CDXS) valves. CDXS technology allows for independent adjustment of high-speed and low-speed compression force through 10 discreet settings, enabling precise tuning for handling response and off-road aggressiveness.

To support the increased ride height and travel, this kit includes tubular front upper control arms equipped with the patented Delta Joint Pro. This joint provides 90 degrees of total articulation to prevent binding and allows for up to a 40% increase in front wheel travel over factory specifications. The 2.5-inch shock bodies offer significantly more surface area and oil volume than OE dampers, resisting cavitation and fade during high-intensity use.

• Adjustable front lift height from 2-3.5 inches over stock
• VS 2.5 Series remote reservoir front and rear shocks for superior thermal management
• CDXS external adjusters for high and low-speed compression damping
• Tubular UCAs with Delta Joint Pro for improved strength and alignment geometry
• Includes sway bar drop brackets to reduce bind in factory links
• Vehicle-specific valving and shock lengths for optimized ride quality
• Fully rebuildable and re-tunable internal components

Fits select 2022-2025 Toyota Tundra and Sequoia models.

The ICON Stage 9 suspension system is a comprehensive performance upgrade for the 2022-2025 Toyota Tundra and Sequoia, engineered to provide 2-3.5 inches of lift while drastically improving damping control. This system centers on ICON VS 2.5 Series remote reservoir front coilovers and rear shocks, both equipped with ICON’s Compression Damping Control (CDC) Valve technology. These externally adjustable valves offer 10 distinct damping settings, allowing you to tune the suspension for varying cargo loads or terrain types with the turn of a knob.

To optimize suspension geometry, this kit includes ICON tubular front upper control arms (UCAs). These arms feature the patented Delta Joint Pro (U.S. Pat. 10,731,700), providing 90 degrees of total articulation to allow for up to a 40% increase in front wheel travel without overstressing factory components. The 2.5-inch shock bodies and remote reservoirs increase oil volume and surface area, providing superior heat dissipation to resist cavitation and damper fade during high-intensity off-road use.

• Front ride height adjustability: 2-3.5" over stock
• CDC Valve technology with 10 user-adjustable compression damping settings
• Tubular UCAs with Delta Joint Pro for 90-degree articulation and durability
• Up to 40% increase in front wheel travel over stock equipment
• 2.5 Series remote reservoir shocks for increased oil volume and cooling
• Sway bar drop brackets included to reduce bind in factory links
• Fully rebuildable and re-tunable shock absorbers for long-term service

Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia (Select Submodels).

The ICON Stage 9 suspension system is a comprehensive handling upgrade engineered to provide maximum wheel travel and adjustable damping control for the 2022-2025 Toyota Tundra and Sequoia. This system features VS 2.5 Series front coilovers and rear shocks, both equipped with remote reservoirs for superior heat dissipation and increased oil volume during sustained off-road use. The highlight of this system is the ICON CDC (Compression Damping Control) Valve, an externally adjustable multi-stage valve that allows you to fine-tune your ride with 10 distinct settings ranging from soft to hard.

To correct suspension geometry at increased lift heights, this kit includes ICON billet aluminum upper control arms. These UCAs feature the patented Delta Joint Pro, providing up to 90 degrees of articulation to prevent binding. The combination of specific valving and billet UCAs allows for up to a 40% increase in front wheel travel over the factory configuration. All shock absorbers in this kit are fully rebuildable and re-tunable to ensure long-term service life.

• 1.25-3.5" adjustable front lift height
• VS 2.5 Series remote reservoir front coilovers and rear shocks
• ICON CDC Valves with 10 compression damping settings
• Billet aluminum UCAs with Delta Joint Pro (90-degree articulation)
• Up to 40% increase in front wheel travel over stock
• Large 2.5" shock bodies for increased piston area and damping force
• Includes sway bar drop brackets to reduce link bind
• Fully rebuildable and re-tunable dampers

Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia (Select Submodels).

The ICON Stage 8 Suspension System is a comprehensive performance overhaul for the 2022-2025 Tundra and Sequoia, delivering an adjustable 2-3.5 inches of front lift height. This system features ICON V.S. 2.5 Series front coilovers and 2.5 Aluminum Series rear shocks, both engineered with remote reservoirs for superior heat dissipation and consistent damping under heavy use. The rear shocks include an internal Bump Zone, which provides an additional 20% of damping force to prevent harsh bottom-outs during aggressive off-road driving.

This stage includes tubular Upper Control Arms (UCAs) equipped with patented Delta Joint Pro (U.S. Pat. 10,731,700), allowing for up to 90 degrees of total articulation and a 40% increase in front wheel travel over stock. To further refine the rear suspension, tubular rear lower links are included to allow for precise pinion angle adjustment and increased articulation, while sway bar drop brackets ensure the factory sway bar links remain bind-free.

• Adjustable front lift height: 2-3.5 inches
• V.S. 2.5 Series front coilovers with remote reservoirs
• 2.5 Aluminum Series rear shocks with remote reservoirs and internal Bump Zone
• Tubular UCAs with Delta Joint Pro for 90 degrees of articulation
• Tubular rear lower links for pinion angle correction
• Up to 40% increase in front wheel travel over factory components
• Included sway bar drop brackets to reduce bind
• Fully rebuildable and re-tunable shock absorbers

Fits select 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia models, including TRD Pro and 1794 Editions. This Stage 8 system provides a comprehensive suspension upgrade designed to increase front wheel travel by up to 40% while delivering 1.25–3.5” of adjustable lift height.

At the core of this system are ICON VS 2.5 Series remote reservoir front coilovers and rear shocks. The 2.5” shock bodies offer significantly more piston area than factory components, while the remote reservoirs increase oil volume and surface area for superior heat dissipation. This prevents overheating and cavitation during sustained hard use, ensuring consistent damping performance without fade. The included billet aluminum upper control arms (UCAs) feature the patented Delta Joint Pro, providing 90 degrees of total articulation and allowing for on-vehicle caster/camber adjustments.

• VS 2.5 Series front coilovers and rear shocks with remote reservoirs
• Billet aluminum UCAs with Delta Joint Pro (U.S. Pat. 10,731,700) for 90° articulation
• Adjustable front lift height from 1.25–3.5”
• Billet rear lower links for on-vehicle pinion angle adjustment
• Up to 40% increase in front wheel travel over stock
• Includes sway bar drop brackets to reduce bind
• Fully rebuildable and re-tunable shock absorbers

Fits 2022-2025 Toyota Tundra (all submodels) and 2023-2025 Toyota Sequoia (TRD Pro, 1794 Edition).

The ICON Stage 7 suspension system provides a comprehensive damping and geometry upgrade for the current generation Tundra and Sequoia. At the core of this system are the VS 2.5 Series remote reservoir front coilovers, which deliver up to 3.5 inches of lift to accommodate larger wheel and tire packages. By utilizing remote reservoirs, these shocks offer significantly increased oil volume and surface area, effectively dissipating heat to prevent cavitation and shock fade during high-speed desert runs or technical trails.

This system includes ICON billet aluminum upper control arms (UCAs), which are essential for maintaining proper caster and camber at increased ride heights. These UCAs feature the patented Delta Joint Pro, providing 90 degrees of articulation for maximum travel without the bind or premature wear associated with standard ball joints. The combination of vehicle-specific valving and increased piston area results in up to a 40% increase in front wheel travel over the factory configuration.

• Front ride height adjustable from 1.25-3.5 inches over stock
• VS 2.5 Series front coilovers with remote reservoirs for superior heat management
• Billet aluminum upper control arms with patented Delta Joint Pro (U.S. Pat. 10,731,700)
• 2.5 Aluminum Series rear remote reservoir shocks for balanced damping
• Increases front wheel travel by up to 40%
• Included sway bar drop brackets to maintain proper linkage geometry
• All shock absorbers are fully rebuildable and re-tunable for long-term service
• Direct bolt-on installation for 2022-2025 models

Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia (Select submodels).

The ICON Stage 6 Suspension System provides a comprehensive handling and travel upgrade for the 2022-2025 Tundra and Sequoia platforms. This system centers on VS 2.5 Series front coilovers with remote reservoirs, paired with ICON billet aluminum upper control arms to achieve a 40% increase in front wheel travel over stock. The adjustable coilovers allow for 1.25 to 3.5 inches of lift, providing clearance for larger, more aggressive tire fitments while maintaining superior ride quality on and off the trail.

Engineering highlights include the patented Delta Joint Pro, which offers 90 degrees of total articulation to prevent binding during extreme suspension cycling. For the rear, 2.0 Aluminum Series remote reservoir shocks provide a balanced tune that manages heat and resists cavitation during high-speed washboard or heavy-load use. This 100% bolt-on system requires no cutting or welding, making it a fully reversible and rebuildable solution for serious enthusiasts.

• Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia models
• Front Lift Height: 1.25–3.5" (adjustable)
• VS 2.5 Series front coilovers with remote reservoirs for maximum cooling
• 2.0 Aluminum Series rear remote reservoir shocks
• Billet aluminum UCAs with patented Delta Joint Pro (U.S. Pat. 10,731,700)
• 90 degrees of total articulation for maximum travel
• Up to 40% increase in front wheel travel over factory components
• Includes sway bar drop brackets to maintain proper geometry
• Fully rebuildable and re-tunable shock absorbers
• 100% Bolt-on installation; no welding or cutting required

Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia models.

The ICON Vehicle Dynamics Stage 4 suspension system provides a comprehensive handling upgrade for the current generation Tundra and Sequoia. This system centers on ICON V.S. 2.5 Series threaded-body front coilovers and CNC-machined billet aluminum upper control arms. By increasing front-end lift by up to 3.5 inches, this kit provides the clearance necessary for 35-inch tires while significantly improving damping performance across varied terrain.

The included billet UCAs feature the patented Delta Joint Pro, providing 90 degrees of total articulation to prevent binding and allow for up to a 40% increase in front wheel travel over the factory setup. These arms offer on-vehicle adjustment for caster and camber to ensure proper alignment geometry. To complement the front, 2.0 Aluminum Series nitrogen-charged monotube shocks are valved specifically to match the front coilovers for a balanced, controlled ride.

• Front Lift Height: 1.25-3.5 inches over stock
• V.S. 2.5 Series front coilovers with internal reservoirs
• 2.0 Aluminum Series rear shocks with internal reservoirs
• CNC-machined 6061 billet aluminum upper control arms
• Patented Delta Joint Pro (U.S. Pat. 10,731,700) with 90° total articulation
• Includes front sway bar drop brackets to reduce bind in OE links
• 100% bolt-on installation; no cutting, drilling, or welding required
• Fully rebuildable and re-tunable shock absorbers

Fits 2010-2024 Toyota 4Runner, 2010-2023 Lexus GX460, and 2010-2014 Toyota FJ Cruiser.

This ICON Stage 3 suspension system is a comprehensive handling and lift solution designed to increase wheel travel and correct suspension geometry on Toyota and Lexus mid-size SUVs. The front end is anchored by 2.5-inch diameter coilover shocks featuring internal reservoirs and height adjustability from 0 to 3.5 inches of lift. These are paired with tubular steel upper control arms (UCAs) featuring the patented Delta Joint, which provides the high-angle performance of a uniball with the durability and weather resistance of a sealed ball joint.

To balance the vehicle's dynamics, the rear includes 2-inch lift coil springs and 2.0 Aluminum Series internal floating piston (IFP) shocks with vehicle-specific valving. The addition of tubular rear lower links provides superior strength over factory units and allows for precise pinion angle adjustment. An included adjustable rear track bar ensures compatibility with Lexus KDSS systems and maintains correct axle alignment after lifting. This bolt-on kit requires no cutting or welding for installation.

• Adjustable 0-3.5" front lift height for larger wheel and tire fitment
• 2.5-inch diameter front coilovers with corrosion-resistant CAD plated bodies and 7/8" shafts
• Tubular steel UCAs with patented Delta Joint for improved alignment and strength
• Tubular rear lower links with multi-durometer bushings for reduced bind and improved roll steer
• Adjustable rear track bar for KDSS compatibility and axle centering
• 2.0 Aluminum Series rear shocks with 5/8" shafts and 6061 CNC machined components
• FK Rod End bearings for maximum longevity and minimal deflection

Fits select 2010-2023 Lexus GX460, 2010-2024 Toyota 4Runner, and 2010-2014 Toyota FJ Cruiser.

The ICON Stage 3 Suspension System is engineered to transform your vehicle's off-road capability and on-road manners by replacing restrictive factory components with race-inspired hardware. This system centers around vehicle-specific tuned 2.5-inch front coilovers with internal reservoirs, providing 0-3.5 inches of lift height to accommodate larger, more aggressive wheel and tire packages. By pairing these with ICON billet aluminum upper control arms featuring the patented Delta Joint, you gain significantly more wheel travel and the ability to fine-tune front-end alignment directly on the vehicle.

In the rear, ICON pairs 2-inch lift coil springs with 2.0 Aluminum Series IFP shocks to balance the damping performance of the front end. To improve articulation and strength, this kit includes CNC-machined 6061 billet aluminum lower links and an adjustable rear track bar, ensuring proper pinion angle and KDSS compatibility. The bolt-on design ensures a straightforward installation without the need for cutting or welding.

• Adjustable front coilovers provide 0-3.5" of lift height
• Billet aluminum Delta Joint upper control arms improve geometry and travel
• 2.5" front shock bodies with 7/8" shafts and CAD plating for corrosion resistance
• 2.0 Aluminum Series rear IFP shocks with 5/8" shafts
• 6061 aircraft-grade aluminum CNC-machined components
• Billet rear lower links offer on-vehicle pinion angle adjustment
• Adjustable rear track bar for alignment correction and KDSS compatibility
• FK Rod End bearings for maximum longevity and minimal deflection
• Complete bolt-on system; no welding or cutting required

Fits 2003-2009 Lexus GX470 Base models.

This ICON Stage 4 suspension system is a comprehensive handling and lift solution designed to improve wheel travel and damping control while eliminating the factory rear air suspension. The front is anchored by 2.5 Series extended travel coilovers featuring corrosion-resistant CAD-plated bodies and 7/8" shafts, paired with tubular steel Delta Joint upper control arms. These UCAs correct suspension geometry for precise alignment and use the patented Delta Joint to combine the durability of a ball joint with the performance of a uniball.

The rear setup includes a coil spring conversion kit to replace the original air bags with ICON 2" lift coil springs. Performance is managed by 2.5 Aluminum Series remote reservoir shocks and adjustable tubular rear lower links. These links use multi-durometer bushings to provide correct roll steer geometry and allow for pinion angle adjustment, ensuring predictable handling on and off the trail.

• Front adjustable lift height: 0-3.5"; Rear lift height: 2"
• 2.5 Series front coilovers and rear remote reservoir shocks with 7/8" shafts
• Tubular steel Delta Joint upper control arms improve travel and geometry
• Rear air-to-coil conversion kit replaces factory air suspension system
• Adjustable tubular rear lower links for optimized pinion angle and strength
• CNC machined 6061 aircraft-grade aluminum components
• FK Rod End bearings for minimal deflection and extended service life
• Bolt-on installation requires no cutting or welding

Fits 2003-2009 Lexus GX470 Base. This Stage 3 suspension system is engineered to increase wheel travel, improve suspension geometry, and replace the factory rear air bags with a reliable coil spring setup.

The front suspension features vehicle-specific tuned 2.5-inch extended travel coilover shocks with internal reservoirs. These coilovers are height-adjustable from 0 to 3.5 inches of lift, providing clearance for larger wheel and tire combinations. They are paired with tubular steel upper control arms featuring ICON's patented Delta Joint, which provides the performance of a uniball with the durability and weather resistance of a traditional ball joint. In the rear, the system includes 2-inch lift coil springs and a conversion kit to eliminate the OE air bag system. Damping is handled by 2.0 Aluminum Series internal reservoir shocks, while tubular rear lower links provide increased strength over stock units and allow for precise pinion angle adjustment.

• Adjustable lift height from 0-3.5" over stock
• Patented Delta Joint (U.S. Pat. 10,731,700) for high-angle articulation and longevity
• 2.5" CAD plated coilover bodies with 7/8" shafts and FK Rod End bearings
• 2.0 Aluminum Series rear shocks with 5/8" shafts
• Tubular rear lower links with multi-durometer bushings for improved roll steer geometry
• Includes rear coil spring conversion kit to delete factory air suspension
• 6061 CNC machined aluminum components
• 100% bolt-on installation; no cutting or welding required

Fits select 2005-2023 Toyota Tacoma models including TRD Off-Road, TRD Pro, TRD Sport, SR5, and Pre Runner.

ICO 2.5 Series Coilover Kits are designed to overhaul your Tacoma's front suspension, providing significantly improved damping capacity and heat management compared to factory struts. These coilovers utilize a large 2.5-inch diameter shock body that increases oil volume, ensuring consistent performance even during prolonged off-road use. The threaded shock bodies allow for precise ride height adjustments, enabling you to level your truck or clear larger wheel and tire combinations.

• Large 2.5-inch diameter shock bodies for increased cooling and fluid capacity
• Threaded body design for adjustable front ride height
• Application-specific valving for the 2005-2023 Toyota Tacoma chassis
• Complete assembly for a direct-fit, bolt-on installation
• Heavy-duty coil springs matched to the vehicle weight and suspension geometry

Fits select 2021-2023 Ford Bronco models equipped with the Sasquatch Package, including Badlands, Wildtrak, Everglades, and Heritage editions.

The ICON Vehicle Dynamics Stage 3 Suspension System is engineered to maximize the off-road capability of Sasquatch-equipped Ford Broncos. This system centers around precision-manufactured internal reservoir coilover shocks, custom-valved to provide superior damping and vehicle control across technical terrain and highway stretches alike. These coilovers provide an adjustable ride height of 2-3” of front lift and 1.25-2.25” of rear lift over the factory Sasquatch height, accommodating up to 35-inch tires with ease (or 37-inch tires with optional up-travel limiters).

To maintain proper suspension geometry and alignment at increased lift heights, the Stage 3 kit includes ICON’s tubular Upper Control Arms (UCAs). These arms feature the patented Delta Joint PRO, which provides a massive 90 degrees of articulation for maximum bind-free travel. The rear suspension is further optimized with shaft-up oriented shocks and unique triple-rate coil springs, ensuring the best possible ride quality through the entire 14 inches of available rear travel.

• Fits 2021-2023 Ford Bronco 4-Door with Sasquatch Package
• Adjustable lift height: 2-3” front / 1.25-2.25” rear
• Front travel: Up to 11.5”; Rear travel: Up to 14”
• Tubular Upper Control Arms with patented Delta Joint PRO (90° total articulation)
• Internal reservoir front and rear shocks with corrosion-resistant CAD plated bodies
• Heavy-duty 7/8” diameter shock shafts
• Triple-rate rear coil springs for optimized load handling and ride quality
• CNC-machined 6061 aircraft-grade aluminum components
• 100% bolt-on installation; no cutting, drilling, or welding required
• Includes PTFE-lined spherical bearings and high-strength alloy lower bar pins

Fits 2021-2023 Ford Bronco 4-door models equipped with the Sasquatch Package.

The ICON Vehicle Dynamics Stage 3 Suspension System is engineered to maximize wheel travel and ride quality for the current-generation Ford Bronco. This system utilizes precision-manufactured, custom-valved internal reservoir coilover shocks that provide an adjustable front lift height of 2-3 inches and 1.25-2.25 inches in the rear. To manage the increased lift and suspension geometry, this kit includes CNC-machined 6061 billet aluminum upper control arms (UCAs). These arms allow for on-vehicle caster and camber adjustment and feature the patented Delta Joint PRO, which provides up to 90 degrees of articulation for extreme off-road performance.

In the rear, the system uses shaft-up oriented shocks paired with triple-rate coil springs to achieve consistent damping and superior travel. The shock bodies are CAD plated for corrosion resistance and feature heavy-duty 7/8-inch diameter shafts. This 100% bolt-on system requires no cutting or welding, making it a direct upgrade for factory suspension components.

• Fits 2021-2023 Ford Bronco Sasquatch 4-Door
• Provides up to 11.5" front and 14" rear wheel travel with 35" tires
• CNC machined 6061 aircraft-grade aluminum UCAs and components
• Patented Delta Joint PRO for 90 degrees of articulation
• CAD plated coilover bodies with 7/8" shafts and PTFE-lined spherical bearings
• Triple-rate rear coil spring design for optimized ride quality
• High-strength alloy CNC machined lower bar pins
• Adjustable ride height: 2-3" front lift / 1.25-2.25" rear lift

Fits 2021-2023 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, and Outer Banks).

This ICON Stage 3 suspension system is engineered to significantly increase wheel travel and damping performance for the 2021-2023 Ford Bronco. The kit features ICON 2.5 Series internal reservoir front and rear coilovers, providing up to 3-4" of front lift and 2-3" of rear lift over stock 4-door non-Sasquatch models. To maintain proper suspension geometry and maximize articulation, this kit includes 6061 billet aluminum upper control arms (UCAs) equipped with the patented Delta Joint PRO, allowing for 90 degrees of total movement and convenient on-vehicle caster/camber adjustment.

The rear coilovers utilize a shaft-up orientation and vehicle-specific dual-rate coil springs designed to handle additional gear weight while maintaining a refined ride both on and off the trail. All components are a 100% bolt-on solution, requiring no cutting, drilling, or welding for installation.

• ICON 2.5 Series front and rear coilovers with CAD plated bodies and 7/8" diameter shafts
• Billet aluminum UCAs with patented Delta Joint PRO (U.S. Pat. 10,731,700) for 90-degree articulation
• Up to 11.5" front and 14" rear wheel travel with 35" tire fitment
• PTFE-lined spherical bearings and CNC machined 6061 aircraft grade aluminum components
• Dual-rate rear springs for improved load capacity and off-road control
• High-strength alloy CNC machined lower bar pins