Fits select 2021-2025 Ford F-150 4WD models, including King Ranch, Lariat, Platinum, Police Responder, Tremor, XL, and XLT.

This ICON Stage 1 suspension system is engineered to provide up to a 20% increase in wheel travel and improved ride quality for the 2021-2025 Ford F-150 without compromising towing capacity. The system features vehicle-specific tuned front coilovers and 2.0 aluminum body rear IFP shocks, providing superior damping and vehicle control across varied terrain. The adjustable front coilovers allow for 2.5-3 inches of lift height, enabling the fitment of larger wheel and tire combinations.

A critical component of this system is the tubular upper control arms featuring the patented Delta Joint PRO. This rebuildable and serviceable articulation joint provides a full 90 degrees of movement to prevent binding throughout the suspension travel. With a 56% larger bearing surface than standard Delta Joints and a hardened Rockwell C 55 chromoly ball, the Delta Joint PRO offers the longevity of an OE ball joint with the strength of a motorsports-style bearing.

• Fits 2021-2025 Ford F-150 4WD (Select Submodels)
• Adjustable 2.5-3" front lift height via CAD-plated coilover bodies
• Tubular UCAs with Delta Joint PRO for improved alignment and strength
• 2.0 aluminum body rear IFP shocks with 5/8" hardened chromed steel shafts
• 6061 Aircraft grade aluminum CNC machined components
• FK rod end bearings for minimal deflection and extended service life
• 100% Bolt-on installation; no drilling, cutting, or welding required
• High strength alloy CNC machined lower bar pins

Fits select 2021-2025 Ford F-150 4WD models (XL, XLT, Lariat, King Ranch, Platinum, Tremor, and Police Responder).

This ICON Stage 1 suspension system provides a 2.5-3" lift height, significantly enhancing off-road capability and ride quality without affecting towing capacity. The system features vehicle-specific tuned front coilovers and 2.0 aluminum body rear IFP shocks, engineered to deliver a 20% increase in wheel travel. Central to this kit are the billet 6061 aircraft-grade aluminum upper control arms, which allow for on-vehicle alignment adjustments.

These control arms are equipped with the patented Delta Joint PRO, a rebuildable and serviceable articulation joint that combines the longevity of a factory ball joint with the strength of a motorsports-style joint. With a chromoly ball hardened to Rockwell C 55 and graphite-impregnated sintered metal races, the Delta Joint PRO offers 90 degrees of articulation—a 14% improvement over the original Delta Joint—ensuring bind-free movement throughout the entire suspension cycle.

• 2.5-3" adjustable front lift height specifically tuned for the F-150 platform.
• Billet 6061 CNC-machined aluminum upper control arms with Delta Joint PRO.
• 2.0 aluminum body rear IFP shocks with 5/8" hardened chromed steel shafts.
• Corrosion-resistant CAD plated coilover bodies with 7/8" shafts.
• FK rod end bearings for maximum longevity and minimal deflection.
• Delta Joint PRO features 56% more bearing surface than standard Delta Joints.
• High-strength alloy CNC-machined lower bar pins.
• 100% bolt-on installation with no drilling, cutting, or welding required.

Fits select 2021-2025 Ford F-150 4WD models including XL, XLT, Lariat, King Ranch, and Platinum.

This Icon Stage 2 Suspension System is engineered to improve the ride quality and off-road performance of your Ford F-150 while providing 0-2.75 inches of adjustable lift height. The cornerstone of this system is the ICON Upper Control Arm set featuring the patented Delta Joint. The Delta Joint is a heavy-duty, high-angle ball joint that combines the extreme articulation of a traditional uniball with the sealed protection and longevity of a standard ball joint. Its zinc-plated housing and tough grease seal resist corrosion and contaminants for noise-free operation in daily driving and harsh environments.

The system includes vehicle-specific tuned 2.5 Aluminum Series rear shocks and front coilovers with 7/8-inch shafts and CAD-plated bodies. These components use hard-anodized, impact-extruded aluminum cylinders for superior heat dissipation and consistent damping control. This 100% bolt-on kit increases wheel travel without requiring any cutting, drilling, or welding.

• Adjustable coilovers provide 0-2.75" of lift height
• Patented Delta Joint UCAs for superior articulation and durability
• 2.5 Aluminum Series rear shocks with one-piece impact extruded cylinders
• Corrosion-resistant CAD plated coilover bodies with 7/8" shafts
• FK rod end bearings for minimal deflection and extended service life
• 6061 Aircraft-grade aluminum CNC machined components
• High-strength alloy CNC machined lower bar pins
• 100% Bolt-on installation; no towing capacity reduction

Fits select 2021-2025 Ford F-150 4WD models including XL, XLT, Lariat, King Ranch, Platinum, Limited, Tremor, and STX. This Stage 1 suspension system is engineered to increase wheel travel and improve damping performance for better vehicle control both on and off-road, without altering factory towing capacity.

The system features ICON 2.5 Series front coilovers equipped with internal reservoirs and custom-engineered Eibach coil springs. These coilovers provide 0-2.75 inches of adjustable lift height, allowing clearance for larger wheel and tire packages. The front units are built with corrosion-resistant CAD-plated shock bodies and heavy-duty 7/8-inch shafts. For the rear, ICON 2.0 Aluminum Series monotube IFP shocks utilize vehicle-specific valving to balance the truck's performance and ensure a composed ride across various terrains.

• Complete 100% bolt-on system; no drilling, cutting, or welding required for installation.
• 2.5 Series front coilovers with 7/8-inch shafts and adjustable 0-2.75" lift height.
• 2.0 Aluminum Series rear IFP shocks with 5/8-inch polished shafts.
• FK rod end bearings for maximum longevity and minimal deflection.
• 6061 aircraft-grade aluminum CNC-machined components.
• High-strength alloy CNC-machined lower bar pins.
• Corrosion-resistant CAD-plated coilover bodies.

Fits 2022-2025 Nissan Frontier models including PRO-4X, PRO-X, S, SL, and SV.

The ICON Stage 1 suspension system provides a significant performance upgrade for the 2022-2025 Nissan Frontier, offering an adjustable 1-3 inches of lift height. This system is designed to improve ride quality on the street while significantly increasing off-road capability by enhancing wheel travel and damping performance. Each component is vehicle-specific and valved to handle the unique weight distribution and geometry of the Frontier chassis, providing a more controlled feel and better bottom-out resistance compared to factory shocks.

• Adjustable 1-3" lift height allows for larger tire fitment
• Increased wheel travel and improved damping performance
• Vehicle-specific valving for superior ride quality and control
• Bolt-on installation requires no cutting or welding of factory components
• Includes all necessary mounting hardware

Fits 2023-2024 GMC Canyon (AT4, Denali, Elevation) and Chevrolet Colorado Trail Boss.

This Icon Vehicle Dynamics Stage 3 suspension system is engineered to maximize wheel travel and damping performance for the wider track width of the 2023-2024 Colorado Trail Boss and GMC Canyon models. By increasing front wheel travel by 20% over stock—achieving a total of 10.25 inches—this system provides exceptional vehicle control and ride quality across technical terrain. The adjustable 2.5 Series front coilovers deliver 1.75-2.5 inches of lift, allowing for larger wheel and tire combinations without compromising factory towing capacity.

The included tubular Delta Joint PRO upper control arms (UCAs) are critical for maintaining proper alignment, providing increased caster to ensure stability. These arms feature a high-clearance design and an increased range of motion that permits the use of extended-travel coilovers. Both front and rear shocks utilize remote reservoirs to dissipate heat during aggressive use, ensuring consistent damping performance in demanding conditions through vehicle-specific valving.

• Adjustable front lift height: 1.75-2.5" over stock
• 2.5 Series extended travel front coilovers with remote reservoirs
• 2.0 Aluminum Series rear remote reservoir shocks with 5/8" polished shafts
• Tubular Delta Joint PRO UCAs for improved strength and alignment range
• 20% increase in wheel travel (10.25" total) over factory equipment
• Corrosion-resistant CAD plated coilover bodies with 7/8" shafts
• FK rod end bearings for longevity and minimal deflection
• CNC-machined 6061 aircraft-grade aluminum components
• 100% bolt-on installation; no drilling, cutting, or welding required

Fits 2023-2024 Chevrolet Colorado Trail Boss and GMC Canyon (AT4, Denali, Elevation).

The ICON Vehicle Dynamics Stage 2 suspension system is engineered to maximize wheel travel and damping performance for the serious driver. This system provides a total of 9 inches of front wheel travel, significantly improving off-road capability and ride quality without affecting factory towing capacity. The height-adjustable 2.5-inch coilovers allow for 1.75 to 2.5 inches of front lift, providing clearance for larger wheel and tire combinations.

To ensure proper geometry and durability, this kit includes tubular Delta Joint PRO upper control arms. These arms increase caster and allow for a full range of alignment adjustment at the increased ride height. For the rear, vehicle-specific tuned 2.0 Aluminum Series internal reservoir shocks balance the truck's performance. The entire system is designed for a direct bolt-on installation, utilizing factory mounting points for a secure fit.

• Adjustable coilovers provide 1.75-2.5" of front lift height
• Increases total front wheel travel to 9"
• 2.5" coilover shocks with internal reservoirs and 7/8" shafts
• 2.0 Aluminum Series rear shocks with 5/8" polished shafts
• Tubular Delta Joint PRO upper control arms for added strength and alignment range
• Corrosion-resistant CAD plated shock bodies
• FK rod end bearings for minimal deflection and extended longevity
• 6061 aircraft-grade aluminum CNC machined components
• 100% bolt-on installation—no cutting, drilling, or welding required

Fits select 2023-2024 Chevrolet Colorado Trail Boss and GMC Canyon AT4, Denali, and Elevation models. This Stage 2 suspension system is engineered to maximize wheel travel and damping performance for serious off-road use without compromising street drivability.

At the core of this system are vehicle-specific tuned 2.5-inch front coilovers featuring internal reservoirs for improved cooling and ICON-engineered coil springs. These coilovers are specifically designed to accommodate the wider track width of the Colorado Trail Boss and Canyon models, providing 1.75 to 2.5 inches of adjustable lift height. This added clearance allows for larger wheel and tire packages while increasing total front wheel travel to 9 inches. For the rear, ICON 2.0 Aluminum Series internal reservoir shocks provide balanced valving to match the high-performance front end.

To maintain proper suspension geometry, this kit includes ICON Billet Aluminum Delta Joint PRO upper control arms. These UCAs offer increased strength and durability over factory units and allow for on-vehicle caster and camber adjustments to ensure perfect alignment at your chosen lift height.

• Fits 2023-2024 GMC Canyon (AT4, Denali, Elevation) and Chevrolet Colorado Trail Boss
• Adjustable 1.75-2.5" front lift height for increased ground clearance
• Increases total front wheel travel to 9 inches
• Billet 6061 aircraft-grade aluminum UCAs with Delta Joint PRO ball joints
• 2.5 Series front coilovers with 7/8" shafts and CAD plated bodies
• 2.0 Aluminum Series rear shocks with 5/8" polished shafts
• FK rod end bearings for minimal deflection and long service life
• 100% bolt-on installation; no drilling, cutting, or welding required
• Maintains factory towing capacity

Fits 2023-2024 Chevrolet Colorado Trail Boss and GMC Canyon AT4, Denali, and Elevation models.

The ICON Vehicle Dynamics Stage 1 Suspension System is engineered to increase wheel travel and damping performance for the 2023-2024 GM mid-size truck platform. This system centers around vehicle-specific tuned 2.5-inch front coilovers featuring internal reservoirs for improved cooling and ICON-engineered coil springs. These coilovers are designed for the wider track width of the Colorado Trail Boss and Canyon models and offer 1.75-2.5 inches of adjustable front lift height, allowing for larger wheel and tire combinations.

By increasing total front wheel travel to 9 inches, this kit improves ride quality across the entire range of motion without requiring modifications to the factory upper control arms. The rear is supported by ICON 2.0 Aluminum Series internal reservoir shocks, valved specifically to balance the truck's performance front-to-rear. The 100% bolt-on design ensures a straightforward installation using factory mounting points.

• Adjustable coilovers provide 1.75-2.5" of front lift over stock
• Increased wheel travel (9" total) and improved damping for off-road control
• 2.5" coilover bodies with corrosion-resistant CAD plating and 7/8" shafts
• 2.0 Aluminum Series rear shocks with 5/8" polished shafts
• 6061 aircraft-grade aluminum CNC-machined components
• FK rod end bearings for maximum longevity and minimal deflection
• Direct bolt-on installation; no drilling, cutting, or welding required
• Maintains factory towing capacity

Fits 2025 Toyota 4Runner SR5, TRD Off-Road, and TRD Sport (including Premium trims).

The ICON Stage 3 Suspension System provides a significant upgrade in ride quality and off-road capability for the 2025 Toyota 4Runner. This system delivers an adjustable 1.25 to 3 inches of lift, allowing for larger tire fitment and increased ground clearance. The centerpiece of the Stage 3 kit is the set of ICON CNC-machined billet aluminum upper control arms (UCAs). These UCAs are critical for maintaining proper alignment geometry and increasing suspension droop travel, ensuring the vehicle remains stable and predictable on technical terrain.

• Adjustable lift height from 1.25" to 3"
• CNC-machined 6061 billet aluminum upper control arms for maximum strength and clearance
• Corrected caster and camber geometry for improved handling after lifting
• Increased wheel travel and improved suspension articulation
• Vehicle-specific tuning for a balanced feel between on-road comfort and off-road damping
• 100% bolt-on design for a straightforward installation process

Fits 2025 Toyota 4Runner 4WD (SR5, TRD Off-Road, and TRD Sport models).

Improve the stance and off-road performance of your vehicle with the ICON Stage 2 Suspension System. This comprehensive kit provides an adjustable lift height of 1.25 to 3 inches, allowing for increased ground clearance and the fitment of larger wheel and tire combinations. By replacing the factory components with ICON-engineered shocks and springs, you gain significantly better damping over harsh terrain without sacrificing on-road comfort.

A critical component of this Stage 2 system is the set of ICON tubular upper control arms (UCAs). These arms are specifically designed to correct suspension geometry and restore proper alignment specs after lifting the vehicle. This ensures predictable handling and reduces wear on front-end components. Built to handle the rigors of the trail, this system bolts directly to factory mounting locations for a precise fit.

• Lift Height: 1.25-3 inches of adjustable front lift
• Tubular Upper Control Arms (UCAs) for improved strength and geometry
• Designed specifically for the 2025 Toyota 4Runner 4WD platform
• Increased suspension travel and articulation
• Improved damping and ride quality across all terrains

Fits 2025 Toyota 4Runner 4WD SR5, TRD Off-Road, and TRD Sport submodels.

The ICON Stage 1 Suspension System is a performance-focused upgrade designed to improve the ride quality and off-road capability of the 2025 Toyota 4Runner 4WD. This system provides an adjustable front lift height of 1.25 to 3 inches, allowing for the fitment of larger tire and wheel packages while leveling the vehicle's stance. Engineered to increase wheel travel and provide superior damping over factory components, the Stage 1 system delivers a more controlled feel both on the highway and across technical terrain.

• Adjustable lift height: 1.25 to 3 inches
• Vehicle-specific tuning for maximum performance and ride quality
• Increases wheel travel over stock suspension
• 100% bolt-on design—no cutting or welding required for installation
• Includes all necessary components and hardware for a complete Stage 1 installation

Fits 2024-2025 Toyota Land Cruiser 250 Series models (1958, Base, and First Edition).

The ICON Stage 5 Billet Suspension System is a high-performance suspension solution designed to enhance the off-road capability and on-road handling of the Toyota Land Cruiser 250 Series. This system features adjustable 2.5 Series front coilovers and 2.5 Aluminum Series remote reservoir rear shocks, providing superior damping and increased fluid capacity for consistent performance during aggressive driving. The included billet aluminum upper control arms (UCAs) correct front-end geometry and allow for precise on-vehicle camber and caster adjustments.

For maximum articulation without binding, this kit utilizes the patented ICON Delta Joint PRO, offering 90 degrees of total movement. The rear is supported by dual-rate coil springs that provide 2 inches of lift, balancing a soft initial rate for ride comfort with a firm overload rate for bottoming resistance. A front differential drop is included to maintain optimal CV joint angles, preserving drivetrain longevity at higher lift heights.

• Adjustable front lift height: 1.25-3" over stock
• Rear lift height: 2" over stock
• 2.5 Series front and rear shocks with remote reservoirs and 7/8" shafts
• CNC machined 6061 aircraft-grade billet aluminum UCAs
• Patented Delta Joint PRO (U.S. Pat. 10,731,700) for maximum articulation
• Corrosion-resistant CAD plated coilover bodies
• Dual-rate rear coil springs for improved load handling
• FK Rod End bearings for reduced deflection and increased longevity
• Includes front differential drop kit for CV angle correction

Fits 2024-2025 Toyota Land Cruiser (1958, Base, and First Edition models).

This ICON Vehicle Dynamics Stage 3 suspension system is engineered to enhance the drivability and off-road capability of the Toyota Land Cruiser 250 Series. The system provides an adjustable 1.25-3" front lift height and a fixed 2" rear lift for a level, aggressive stance. Central to this kit are the tubular upper control arms (UCAs), which feature ICON's patented Delta Joint PRO. This serviceable and rebuildable joint provides 90 degrees of total articulation, correcting front-end geometry and adding the caster necessary for proper alignment on lifted vehicles.

To maintain drivetrain longevity, a front differential drop kit is included to optimize CV joint angles throughout the increased wheel travel. The rear is managed by dual-rate coil springs that offer a compliant ride over small bumps while providing a firm overload rate for bottoming resistance. The included ICON Billet Adjustable Rear Track Bar allows for precise centering of the rear axle using on-vehicle double adjuster rod ends. Damping is handled by vehicle-specific tuned 2.0 Aluminum Series internal reservoir rear shocks for superior control across varied terrain.

• Adjustable front coilovers provide 1.25-3" of lift over stock
• Tubular UCAs with Delta Joint PRO (U.S. Pat. 10,731,700) for 90-degree articulation
• Corrosion-resistant CAD plated coilover bodies with 7/8" shafts
• 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
• Dual-rate rear coil springs provide 2" of lift and improved ride quality
• Billet 6061 aluminum adjustable rear track bar with FK Rod End bearings
• Front differential drop maintains proper CV operating angles
• CNC machined 6061 aircraft grade aluminum components

Fits 2024-2025 Lexus GX550 (Luxury, Luxury+, Premium, and Premium+).

The ICON Stage 3 Suspension System is engineered to optimize the ride quality and off-road capability of the Lexus GX550. This system features adjustable front coilovers providing 1.25-3 inches of lift, paired with dual-rate rear coil springs that deliver a 2-inch lift for a leveled stance. The included tubular upper control arms (UCAs) correct front-end geometry and increase caster, while the patented Delta Joint PRO provides up to 90 degrees of articulation without the binding associated with standard ball joints.

To ensure precise axle alignment, this kit includes a 6061 billet aluminum adjustable rear track bar, allowing for on-vehicle centering of the rear axle. The suspension is rounded out by ICON 2.0 Aluminum Series internal reservoir rear shocks, featuring vehicle-specific valving to balance damping performance across all terrains. A front differential drop is also included to maintain proper CV joint angles and maximize reliable wheel travel.

• Adjustable front coilovers provide 1.25-3" lift height
• Tubular UCAs with Delta Joint PRO (U.S. Pat. 10,731,700) for 90-degree articulation
• ICON 2.0 Aluminum Series rear shocks with 5/8" shafts and internal reservoirs
• CAD-plated coilover bodies with heavy-duty 7/8" shafts
• Billet 6061 aircraft-grade aluminum adjustable rear track bar
• Dual-rate rear coil springs for improved bottoming resistance and ride comfort
• Front differential drop kit preserves CV axle operating angles
• FK Rod End bearings for reduced deflection and increased longevity

Fits select 2024-2025 Toyota Tacoma models including SR5, TRD Off-Road, TRD Sport, and Limited.

The ICON Stage 11 suspension system represents the pinnacle of performance for the 2024-2025 Toyota Tacoma. This comprehensive kit is built around ICON 2.5 Aluminum Series front coilovers and rear shocks, both featuring remote reservoirs and CDC Valves (Compression Damping Control Valve). The CDCV system allows for 10 distinct compression damping settings to fine-tune your ride for anything from loaded highway commuting to high-speed desert transitions. The front coilovers provide 1.25-3 inches of lift, while the rear dual-rate coil springs are engineered to maintain a 0.5-inch lift even when carrying approximately 600 lbs of additional gear.

Drivability and geometry are managed by CNC-machined 6061 billet aluminum components. The included upper control arms (UCAs) feature the patented Delta Joint Pro, providing 90 degrees of total articulation to eliminate bind during full suspension travel. For the rear, billet upper and lower links combined with an adjustable track bar allow for precise axle centering and pinion angle adjustment. Every shock features corrosion-resistant CAD-plated bodies and massive 7/8-inch shafts for maximum durability in harsh environments.

• Adjustable front coilovers provide 1.25-3" of lift height
• Dual-rate rear springs provide 0.5" lift with 600 lbs of added weight
• 2.5 Aluminum Series shocks with 7/8" shafts and remote reservoirs
• CDC Valve technology with 10 compression damping adjustment settings
• Billet aluminum UCAs with patented Delta Joint Pro (U.S. Pat. 10,731,700)
• 6061 aircraft-grade aluminum CNC-machined links and track bar
• FK Rod End bearings for minimal deflection and extended longevity
• Front differential drop kit included to optimize 4WD CV joint angles

Fits 2024-2025 Toyota Tacoma Limited, SR5, TRD Off-Road, and TRD Sport.

The ICON Vehicle Dynamics Stage 8 suspension system is engineered to maximize the performance of the 2024-2025 Toyota Tacoma across any terrain. At the core of this system are 2.5 Series front coilovers and remote reservoir rear shocks, both equipped with ICON’s CDC (Compression Damping Control) Valves. These valves provide 10 distinct settings of compression adjustment to fine-tune ride quality for varied loads and environments. The 2.5-inch diameter shock bodies feature CAD plating and massive 7/8-inch shafts for superior heat dissipation and durability.

Up front, billet aluminum upper control arms (UCAs) correct suspension geometry and provide increased caster and camber adjustment. These UCAs are equipped with the patented Delta Joint Pro, which delivers 90 degrees of articulation to eliminate binding during full suspension travel. In the rear, the system includes billet aluminum lower links with double adjusters for precise pinion angle tuning and dual-rate coil springs. These springs are specifically tuned to provide a .5-inch lift while supporting 600 lbs of additional gear, ensuring the truck maintains its stance even when fully outfitted for overland travel.

• Front lift height: 1.25-3 inches over stock
• Rear lift height: 0.5 inches (optimized for 600 lbs additional weight)
• ICON Delta Joint Pro with 90 degrees of total articulation
• CDC Valves for 10 compression damping settings
• Billet 6061 aircraft grade aluminum CNC machined UCAs and lower links
• 7/8-inch diameter induction hardened, chrome plated shock shafts
• Dual-rate rear coil springs for improved load support and bottoming resistance
• FK Rod End bearings for maximum longevity and minimal deflection
• Includes front differential drop kit for optimized 4WD CV angles

Fits 2024-2025 Toyota Tacoma SR5, TRD Off-Road, TRD Sport, and Limited models. This comprehensive Stage 7 suspension system is engineered to optimize front-end geometry, increase wheel travel, and provide superior damping for both on-road comfort and aggressive off-road use.

The system features ICON 2.5 Aluminum Series remote reservoir coilovers and rear shocks. The front coilovers provide 1.25-3 inches of lift, while the rear remote reservoir shocks utilize vehicle-specific valving and integrated bump zones for maximum bottoming resistance. To correct suspension geometry, billet aluminum upper control arms (UCAs) are included, featuring the patented Delta Joint Pro. This rebuildable and serviceable joint provides 90 degrees of articulation, eliminating the binding found in factory ball joints while allowing for increased caster and camber adjustment.

For the rear, dual-rate coil springs are tuned to provide 0.5 inches of lift when carrying approximately 600 lbs of additional cargo or equipment. The included billet rear lower links feature a double-adjuster design for on-vehicle pinion angle correction and use dual-durometer greaseless bushings and FK rod ends for a combination of silent operation and extreme durability.

• 2.5 Series front coilovers with remote reservoirs and CAD plated bodies
• Billet 6061 aluminum UCAs with Delta Joint Pro (U.S. Pat. 10,731,700)
• Billet rear lower links with on-vehicle adjustability
• 2.5 Aluminum Series remote reservoir rear shocks with 7/8-inch shafts
• Dual-rate rear coil springs designed for constant 600lb loads
• Front differential drop kit to maintain proper CV axle angles
• FK Rod End bearings and CNC machined aluminum components
• Complete hardware and installation instructions included

Fits 2024-2025 Toyota Tacoma SR5, TRD Off-Road, TRD Sport, and 2024 Limited models.

The ICON Stage 7 suspension system is a comprehensive performance upgrade engineered to improve the handling, travel, and geometry of the 2024-2025 Toyota Tacoma. This system features 2.5 Aluminum Series remote reservoir coilovers and rear shocks, providing superior damping and cooling for sustained off-road use. The included billet 6061 aluminum upper control arms (UCAs) feature the patented Delta Joint PRO, which provides 90 degrees of articulation and allows for on-vehicle caster and camber adjustment to correct front-end geometry after lifting.

For the rear, triple-rate coil springs provide 0.5 inches of lift and are designed with distinct spring rates to maintain a plush ride on-road while offering a firm overload rate to prevent bottoming out. Billet rear lower links feature the ICON double adjuster for on-vehicle pinion angle correction and utilize a combination of dual-durometer greaseless bushings and FK rod ends to maximize articulation while damping road vibration. To protect the drivetrain, a front differential drop is included to maintain proper CV joint angles at the increased 1.25-3 inch lift height.

• 1.25-3" adjustable front lift height over stock
• 2.5 Aluminum Series remote reservoir front and rear shocks with 7/8" shafts
• Billet 6061 aircraft grade aluminum UCAs with Delta Joint PRO (U.S. Pat. 10,731,700)
• Triple-rate rear coil springs for optimized ride quality and .5" lift
• Billet rear lower links with FK rod ends and on-vehicle adjustability
• Front differential drop kit to maintain maximum CV operating angles
• Corrosion-resistant CAD plated coilover shock bodies
• CNC machined 6061 aluminum components

Fits 2024-2025 Toyota Tacoma models including SR5, TRD Off-Road, TRD Sport, and Limited.

The ICON Vehicle Dynamics Stage 5 suspension system is a comprehensive performance upgrade engineered to improve the handling and stance of the 2024-2025 Toyota Tacoma. This system provides 1.25–3 inches of front lift height and 0.5 inches of rear lift (rated at 600 lbs of additional rear weight), allowing for increased fender clearance for larger wheel and tire packages. The kit features 2.5 Series front coilovers and 2.5 Aluminum Series remote reservoir rear shocks, both equipped with ICON’s CDC Valves, offering 10 specific compression damping settings to suit any terrain or load requirement.

To ensure proper front-end geometry at increased ride heights, this system includes billet 6061 aircraft-grade aluminum upper control arms (UCAs). These UCAs utilize the patented Delta Joint PRO, which provides 90 degrees of total articulation to eliminate binding during full bump and droop travel. For 4WD models, an included front differential drop kit optimizes CV joint angles to maintain drivetrain longevity. The rear is supported by dual-rate coil springs that balance on-road comfort with a firm overload rate for superior bottoming resistance.

• 2.5 Series front coilovers and remote reservoir rear shocks with 7/8-inch shafts
• CDC Valves for 10-position compression damping adjustment
• Billet aluminum UCAs with Delta Joint PRO (U.S. Pat. 10,731,700)
• Dual-rate rear coil springs providing 0.5-inch lift at 600 lbs load
• Adjustable front lift height from 1.25-3 inches
• Front differential drop kit for optimized CV axle angles
• Corrosion-resistant CAD-plated coilover bodies
• FK Rod End bearings for minimal deflection and extended service life
• 6061 CNC-machined aluminum components

Fits 2024-2025 Toyota Tacoma SR5, TRD Off-Road, and TRD Sport, and 2024 Toyota Tacoma Limited.

The ICON Vehicle Dynamics Stage 5 suspension system is engineered for drivers demanding maximum performance and damping control. This comprehensive kit features vehicle-specific tuned 2.5 Series coilover shocks equipped with remote reservoirs and ICON’s CDC (Compression Damping Control) Valves. These externally adjustable valves provide 10 discrete levels of compression damping, allowing you to calibrate the suspension for varying terrain and cargo loads. The remote reservoirs significantly increase oil volume and surface area for heat dissipation, effectively preventing shock fade and cavitation during hard off-road use.

To maintain proper suspension geometry and alignment at 1.25-3” of front lift, this system includes tubular upper control arms (UCAs) featuring patented Delta Joint Pro bearings. These joints provide 90 degrees of total articulation to maximize wheel travel. For 4WD models, the included front differential drop bracket corrects CV angles to prevent binding. In the rear, 2.5 Aluminum Series remote reservoir shocks are paired with dual-rate coil springs designed to maintain 0.5” of lift while supporting up to 600 lbs of additional gear.

• Adjustable front lift height: 1.25-3” over stock
• 2.5 Series front coilovers with corrosion-resistant CAD-plated bodies and 7/8” shafts
• CDC Valves provide 10 discrete compression damping settings from soft to hard
• Remote reservoirs for increased cooling and oil capacity
• Tubular UCAs with Delta Joint Pro for 90 degrees of articulation
• Dual-rate rear springs optimized for 600 lbs of additional constant weight
• 6061 aircraft-grade aluminum CNC-machined components
• Includes front differential drop and polyurethane mounting bushings
• FK Rod End bearings for extended longevity and minimal deflection

Fits 2024-2025 Toyota Tacoma SR5, TRD Off-Road, TRD Sport, and Limited models.

This ICON Stage 4 suspension system provides a complete performance overhaul for the 2024-2025 Toyota Tacoma, combining adjustable front coilovers with overland-series rear components to manage increased weight and rigorous off-road terrain. The system features 2.5 Aluminum Series remote reservoir coilovers and rear shocks, utilizing vehicle-specific valving and integrated bump zones for superior bottoming resistance. The included billet 6061 aluminum upper control arms (UCAs) correct front-end geometry and feature the patented Delta Joint PRO, offering 90 degrees of articulation without the binding typical of standard ball joints.

To handle the additional weight of bed racks, rooftop tents, or gear, the kit includes dual-rate rear coil springs designed to maintain a .5-inch lift height with approximately 600 lbs of added cargo. For 4WD models, the front differential drop kit is included to maintain proper CV axle angles at the higher 1.25-3 inch lift range, ensuring long-term drivetrain reliability.

• Adjustable coilovers provide 1.25-3 inches of front lift height
• Dual-rate rear springs net .5-inch lift with 600 lbs of constant load
• 2.5 Aluminum Series remote reservoir shocks with 7/8-inch shafts
• Billet 6061 aluminum UCAs with Delta Joint PRO for 90 degrees of articulation
• Corrosion-resistant CAD plated coilover bodies and CNC machined components
• FK Rod End bearings for minimal deflection and maximum longevity
• Includes front differential drop for optimized 4WD CV joint angles

Fits 2024-2025 Toyota Tacoma (SR5, TRD Off-Road, TRD Sport, and Limited).

The ICON Stage 4 suspension system provides a comprehensive performance upgrade for the 2024-2025 Toyota Tacoma, engineered to increase wheel travel and damping capability for superior control both on-road and in high-speed off-road environments. This system features vehicle-specific tuned 2.5 Series front coilovers and 2.5 Aluminum Series rear shocks, both equipped with remote reservoirs. These reservoirs significantly increase oil volume and surface area, providing the heat dissipation required to prevent cavitation and shock fade during aggressive use. The front coilovers are height-adjustable from 1.25 to 3 inches, allowing for increased ground clearance and room for larger wheel and tire packages.

To maintain drivetrain reliability at increased lift heights, this kit includes a front differential drop bracket with polyurethane mounting bushings, which optimizes CV axle angles and limits differential movement under load. The included tubular upper control arms (UCAs) are essential for correcting front-end geometry and adding the necessary caster for proper alignment. These UCAs feature the patented ICON Delta Joint PRO, which provides 90 degrees of articulation to eliminate binding throughout the entire range of suspension travel.

• 2.5 Series front coilovers with remote reservoirs for superior cooling and damping
• 2.5 Aluminum Series remote reservoir rear shocks with 7/8" shafts and integrated bump zones
• Tubular UCAs with Delta Joint PRO for 90-degree articulation and increased durability
• Front differential drop maximizes CV operating angles on 4WD models
• Adjustable front lift height from 1.25-3" over factory
• Corrosion-resistant CAD plated coilover bodies with 7/8" induction-hardened shafts
• FK Rod End bearings for maximum longevity and reduced deflection
• CNC machined 6061 aircraft-grade aluminum components
• ICON-engineered coil springs

Fits 2024-2025 Toyota Tacoma (SR5, TRD Off-Road, TRD Sport, and Limited).

This ICON Stage 4 suspension system provides a comprehensive performance upgrade for the 2024-2025 Toyota Tacoma, increasing wheel travel and damping ability for superior control in technical off-road terrain. The system centers on vehicle-specific tuned 2.5 Series front coilovers and 2.5 Aluminum Series rear shocks, both featuring remote reservoirs for increased oil volume and heat dissipation to prevent cavitation and shock fade. The front coilovers are height-adjustable from 1.25" to 3" over stock, allowing for larger wheel and tire combinations.

This Stage 4 system includes billet 6061 aluminum upper control arms (UCAs) featuring patented Delta Joint Pro spherical joints, providing 90 degrees of total articulation and on-vehicle caster/camber adjustment. To protect the drivetrain, a front differential drop bracket is included to maintain proper CV angles at the increased ride height. In the rear, triple rate coil springs provide a 0.5" lift while improving ride quality across varying loads.

• Adjustable front lift height: 1.25-3" over stock
• 0.5" rear lift height
• 2.5 Series remote reservoir front and rear shocks with 7/8" shafts
• CNC machined 6061 aircraft-grade aluminum UCAs and components
• Patented Delta Joint Pro with 90-degree articulation (U.S. Pat. 10,731,700)
• Triple rate rear coil springs for optimized ride and performance
• FK Rod End bearings for minimal deflection and extended longevity
• Corrosion-resistant CAD plated coilover bodies
• Polyurethane differential mounting bushings to reduce movement

Fits 2024-2025 Toyota Tacoma (Limited, SR5, TRD Off-Road, and TRD Sport). This Stage 3 suspension system is engineered to enhance the handling and off-road capability of the fourth-generation Tacoma by increasing wheel travel and damping performance while correcting front-end geometry.

The system features vehicle-specific tuned 2.5 Series front coilover shocks with internal reservoirs for superior cooling and 7/8" shafts for heavy-duty durability. These coilovers provide 1.25-3" of adjustable lift height, allowing for larger wheel and tire combinations. To maintain driveline longevity, the included front differential drop brackets optimize CV joint angles and prevent bind at full suspension droop. The rear is supported by 2.0 Aluminum Series remote reservoir shocks and dual-rate "Overland" coil springs, specifically designed to provide a 0.5" lift while carrying approximately 600 lbs of additional constant cargo or equipment weight.

For improved alignment and strength, this kit includes ICON billet 6061 aluminum upper control arms (UCAs). These UCAs feature the patented Delta Joint PRO, offering 90 degrees of total articulation and full on-vehicle camber and caster adjustment. All components utilize FK Rod End bearings for minimal deflection and maximum service life.

• Fits 2024-2025 Toyota Tacoma models
• Adjustable 1.25-3" front lift height; 0.5" rear lift (with 600lb load)
• 2.5 Series front coilovers with CAD-plated bodies and 7/8" shafts
• 2.0 Aluminum Series remote reservoir rear shocks with 5/8" shafts
• Billet 6061 aircraft-grade aluminum UCAs with Delta Joint PRO
• Includes front differential drop kit with polyurethane bushings
• FK Rod End bearings for extended longevity
• Manufacturer Part Number: K53193

Fits 2024-2025 Toyota Tacoma SR5, TRD Off-Road, TRD Sport, and Limited.

The ICON Vehicle Dynamics Stage 3 suspension system is engineered to increase wheel travel and damping performance for the fourth-generation Toyota Tacoma. This system centers on vehicle-specific 2.5 Series front coilovers, which are height-adjustable from 1.25" to 3" of lift. These coilovers feature CAD-plated bodies with 7/8" shafts and internal reservoirs for enhanced cooling. To maintain drivetrain reliability, a front differential drop bracket with polyurethane bushings is included to correct CV angles and maximize available travel on 4WD models.

To further improve front-end geometry, this kit includes ICON tubular upper control arms (UCAs). These UCAs feature the patented Delta Joint PRO, which provides 90 degrees of total articulation and built-in caster correction for better alignment and drivability. The rear suspension is upgraded with 2.0 Aluminum Series remote reservoir shocks and dual-rate Overland coil springs. These rear coils provide a 0.5" lift and are specifically tuned to maintain ride quality and height when carrying approximately 600 lbs of additional constant weight from gear, bed racks, or campers.

• Adjustable 2.5 Series front coilovers provide 1.25-3" lift height
• Tubular UCAs with patented Delta Joint PRO (U.S. Pat. 10,731,700) for 90° articulation
• Overland dual-rate rear coils designed for 0.5" lift with 600 lbs constant load
• 2.0 Aluminum Series remote reservoir rear shocks with 5/8" shafts
• Front differential drop kit with polyurethane mounting bushings
• Corrosion-resistant CAD plated coilover bodies with 7/8" shafts
• FK Rod End bearings for maximum longevity and minimal deflection
• CNC-machined 6061 aircraft-grade aluminum components

Fits 2024-2025 Toyota Tacoma (SR5, TRD Off-Road, TRD Sport, and Limited).

The ICON Stage 2 Suspension System is engineered to increase wheel travel and damping performance for the 2024-2025 Toyota Tacoma. This system centers on vehicle-specific tuned 2.5 Series front coilovers featuring internal reservoirs for improved cooling and CAD-plated bodies for corrosion resistance. These coilovers provide 1.25-3" of adjustable front lift, allowing for larger wheel and tire packages while maintaining optimal geometry. The included front differential drop brackets and polyurethane mounting bushings maintain proper CV angles and limit differential movement under load.

This kit upgrades the front end with ICON billet aluminum upper control arms (UCAs) equipped with the patented Delta Joint PRO. This setup provides 90 degrees of articulation and allows for on-vehicle caster and camber adjustment. To manage heavy cargo or camping gear, the dual-rate rear Overland coil springs provide a 0.5" lift height while specifically tuned to handle approximately 600 lbs of additional rear weight.

• Adjustable front lift height: 1.25-3"
• 2.5 Series front coilovers with 7/8" hardened shafts
• 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
• Billet 6061 aircraft-grade aluminum UCAs with Delta Joint PRO (U.S. Pat. 10,731,700)
• Dual-rate rear coil springs for 0.5" lift and +600lb weight capacity
• FK Rod End bearings for extended longevity and minimal deflection
• CNC machined aluminum components and ICON engineered springs

Fits 2024-2025 Toyota Tacoma Limited, SR5, TRD Off-Road, and TRD Sport models. This Stage 2 suspension system is engineered to increase wheel travel and damping performance for serious off-road use while maintaining refined street manners.

This system centers on ICON 2.5 Series front coilovers, which are height-adjustable from 1.25 to 3 inches of lift. These coilovers feature internal reservoirs for increased oil volume and cooling, paired with vehicle-specific tuned coil springs. To maintain proper front-end geometry at increased heights, the kit includes tubular upper control arms equipped with the patented Delta Joint PRO. These joints provide up to 90 degrees of articulation, allowing for full suspension cycle without binding. The included front differential drop brackets and polyurethane mounting bushings ensure optimal CV axle angles and reduced drivetrain movement under load.

The rear is equipped with dual-rate Overland coil springs designed to provide a 0.5-inch lift while specifically tuned for vehicles carrying approximately 600 lbs of additional gear. Damping is handled by ICON 2.0 Aluminum Series internal reservoir shocks, providing a balanced and controlled ride across varied terrain.

• Adjustable front lift height from 1.25-3 inches
• ICON Delta Joint PRO (U.S. Pat. 10,731,700) for 90-degree articulation
• 2.5 Series front coilovers with CAD-plated bodies and 7/8-inch shafts
• 2.0 Aluminum Series rear shocks with 5/8-inch shafts
• Dual-rate rear springs optimized for 600 lbs of additional cargo
• 6061 CNC-machined aluminum components and FK Rod End bearings
• Includes front differential drop kit to maximize CV longevity

Fits 2024-2025 Toyota Tacoma Limited, SR5, TRD Off-Road, and TRD Sport models. This ICON Vehicle Dynamics Stage 2 suspension system is engineered to enhance both on-road comfort and off-road capability by correcting front-end geometry and increasing wheel travel.

This kit features tubular upper control arms (UCAs) equipped with the patented Delta Joint PRO, providing 90 degrees of total articulation to eliminate binding during full suspension cycle. The front coilovers are height-adjustable from 1.25 to 3 inches and feature corrosion-resistant CAD-plated bodies with 7/8-inch shafts. To maintain drivetrain reliability at increased lift heights, a front differential drop is included to optimize CV joint operating angles. The rear is supported by triple-rate coil springs that provide 0.5 inches of lift while delivering a soft initial ride and a firm overload rate for superior bottoming resistance. Damping is handled by 2.0 Aluminum Series internal reservoir rear shocks with 5/8-inch shafts, specifically valved for the 2024+ Tacoma chassis.

• Adjustable coilovers provide 1.25-3" front lift height
• Tubular UCAs with Delta Joint PRO (U.S. Pat. 10,731,700) for 90-degree articulation
• Triple-rate rear coil springs provide 0.5" rear lift and improved ride quality
• 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
• CAD-plated coilover bodies with 7/8" shafts and FK Rod End bearings
• 6061 aircraft-grade aluminum CNC-machined components
• Included front differential drop maximizes wheel travel on 4WD models

Fits 2024-2025 Toyota Tacoma (Limited, SR5, TRD Off-Road, TRD Sport).

The ICON Stage 2 suspension system provides a comprehensive performance upgrade for the 2024-2025 Toyota Tacoma, combining adjustable front lift height with precision-engineered components to correct suspension geometry. This system features billet aluminum upper control arms (UCAs) that allow for on-vehicle caster and camber adjustment, ensuring optimal alignment and drivability after lifting. These UCAs are equipped with the patented Delta Joint PRO, which provides 90 degrees of total articulation to eliminate binding during full suspension travel.

To manage the rear, ICON utilizes triple-rate coil springs that deliver a plush ride on-road while providing a firmer overload rate for superior bottoming resistance in technical terrain. The package is rounded out by 2.0 Aluminum Series internal reservoir rear shocks, featuring vehicle-specific valving to balance the truck's performance across all four corners. For 4WD models, an included front differential drop kit ensures CV joints maintain proper operating angles at maximum travel.

• Adjustable front coilovers provide 1.25-3" of lift height
• CNC machined 6061 aircraft-grade billet aluminum UCAs
• Patented Delta Joint PRO (U.S. Pat. 10,731,700) with 90° articulation
• Triple-rate rear coil springs providing 0.5" of rear lift
• Corrosion-resistant CAD-plated coilover bodies with 7/8" shafts
• 2.0 Aluminum Series rear shocks with 5/8" shafts
• FK Rod End bearings for minimal deflection and extended service life
• Front differential drop kit for optimized CV joint angles