Fits 2003-2008 Nissan 350Z and 2003-2007 Infiniti G35 Coupe models.

Tein Flex Z coilovers provide a high-quality, made-in-Yokohama suspension solution for drivers looking to improve handling and aesthetics without sacrificing street drivability. This system utilizes a twin-tube design for a smooth stroke on uneven surfaces while maintaining 16 levels of linear damping force adjustment. Unlike basic sleeves, the Flex Z series features a full-length ride height adjustment system, allowing you to set your preferred stance by adjusting the bracket position without affecting the spring stroke or preload.

• Twin-tube internal construction for enhanced street comfort and durability
• 16-level damping force adjustment (compression and rebound combined)
• Full-length ride height adjustment system with move-able lower brackets
• Compatible with Tein EDFC series for in-cabin electronic damping control
• High-performance damper oil with stable viscosity characteristics
• Powder-coated damper bodies and ZT-coated adjustment threads for superior corrosion resistance
• Includes upper mounts (pillowball or reinforced rubber depending on application) and all necessary hardware for a direct bolt-on installation

Fits 1990-1996 Nissan 300ZX (Z32).

The Tein Flex Z coilover kit is engineered to provide a precise balance between daily driving comfort and spirited performance handling. Utilizing a twin-tube internal structure, these coilovers offer a longer stroke and lower internal friction compared to mono-tube designs, making them ideal for the varying road conditions a street-driven Z32 encounters. The sealed-structure design allows for high-quality manufacturing in Yokohama while maintaining an accessible price point.

This system features full-length ride height adjustment, allowing you to lower your vehicle's center of gravity without sacrificing suspension travel or spring preload. With 16-level damping force adjustment, you can fine-tune the compression and rebound simultaneously to match your specific driving environment. Each damper is finished with Tein's signature green powder coating and ZT coating on the threads for superior corrosion resistance and ease of adjustment during seasonal maintenance.

• Twin-tube internal construction for improved street compliance and durability
• Full-length height adjustment via threaded shock body independently of preload
• 16-level damping force adjustment for precise suspension tuning
• High-strength SAE9254 steel cold-formed springs
• Powder-coated steel damper bodies with ZT-coated threads for corrosion protection
• Includes reinforced rubber or pillowball upper mounts (specific to Z32 application)

Fits 1988-1999 Nissan 240SX, 180SX, and Silvia (S13 chassis).

Tein Flex Z coilovers provide a high-performance suspension solution for the S13 chassis, balancing aggressive handling with street-driven comfort. Featuring a twin-tube internal design, these coilovers offer a smoother stroke to better absorb road irregularities while maintaining the responsiveness required for spirited driving or track days. The full-length adjustment system allows you to set your preferred ride height by moving the bottom bracket, ensuring that spring travel and stroke remain optimal regardless of how low the vehicle is set.

• 16-level damping force adjustment to fine-tune compression and rebound simultaneously.
• Full-length ride height adjustment allows independent tuning of height and spring preload.
• Twin-tube construction for improved ride quality and durability on varied road surfaces.
• Includes vehicle-specific upper mounts (Pillowball or Reinforced Rubber) for a direct-bolt installation.
• High-durability powder coating and ZT coating on threads for maximum corrosion resistance.
• Compatible with Tein EDFC series for electronic damping control from the driver’s seat.

Fits 2016+ Mazda MX-5 Miata (NDERC) models.

Tein Flex Z coilovers offer a complete suspension overhaul for the ND-generation MX-5, engineered to balance spirited driving performance with daily street comfort. This system utilizes a full-length ride height adjustment, allowing you to set the vehicle's stance by adjusting the case length without affecting spring preload or suspension stroke.

The Flex Z series features a twin-tube internal design, which provides a more supple ride over road imperfections compared to monotube alternatives. With 16 levels of damping force adjustment, drivers can quickly transition from a compliant street setting to a firmer, more controlled setup for track use or canyon driving.

• Full-length ride height adjustment system for independent height and preload settings
• 16-level linear damping force adjustment (combined compression and rebound)
• Twin-tube internal structure for improved ride quality and durability
• High-quality cold-formed springs and specialized damper oil for consistent performance
• Designed and manufactured in Yokohama, Japan

Fits 2006-2015 Mazda MX-5 Miata (NCEC).

Tein Flex Z coilovers provide a complete, bolt-on suspension solution for the NC-generation Mazda MX-5, balancing street comfort with precise handling. Unlike basic lowering springs, the Flex Z system features a full-length ride height adjustment, allowing you to set the vehicle's stance without sacrificing damper stroke or spring preload. The twin-tube internal structure is specifically chosen for street use to provide a smoother stroke over uneven pavement.

• 16-level linear damping force adjustment (rebound and compression combined) for fine-tuning ride quality
• Twin-tube design for better compliance and comfort on public roads
• Full-length height adjustment system preserves full suspension travel at any ride height
• Includes reinforced rubber or pillowball upper mounts for simplified installation to factory mounting points
• ZT coated adjustment threads and powder-coated shock bodies provide superior corrosion resistance against the elements
• Compatible with Tein EDFC (Electronic Damping Force Controller) for in-cabin damping adjustments
• Sealed-structure design ensures high-quality manufacturing standards in Japan

Fits 2004-2011 Mazda RX-8 (SE3P).

The Tein Flex Z coilover system provides a complete suspension solution for RX-8 owners seeking a balance between aggressive handling and street-driven comfort. Built with a twin-tube internal structure, these dampers offer a smooth stroke that effectively absorbs road imperfections while maintaining the lateral stability required for spirited driving. The full-length adjustability allows you to set your preferred ride height independently of spring preload, ensuring you retain full suspension travel even at lower stances.

Each damper features 16 levels of linear damping force adjustment, giving you precise control over rebound and compression settings to match your driving environment. To ensure long-term durability, the steel damper bodies are finished in Tein's signature green powder coat, while the threaded sections utilize a specialized ZT coating to resist corrosion and seizing in harsh conditions.

• Twin-tube internal design for superior ride comfort and road compliance
• 16-level damping force adjustment for fine-tuned handling control
• Full-length height adjustment system maintains full stroke at any height
• Includes vehicle-specific upper mounts for a direct-fit installation
• ZT coated threads for maximum protection against rust and debris
• Compatible with Tein EDFC for in-cabin damping adjustments
• High-tensile SAE9254 cold-formed springs

Fits 1990-2005 Mazda Miata (NA6C, NA8C, and NB8C).

The Tein Flex Z Coilover Kit provides a comprehensive suspension solution for Miata owners seeking a balance between daily street comfort and aggressive track performance. Engineered specifically for the NA and NB chassis, this system features a twin-tube internal design that ensures a smooth stroke even on uneven road surfaces. The Flex Z series is distinguished by its full-length ride height adjustment, allowing you to lower your vehicle's center of gravity without altering spring preload or compromising damper travel.

• Twin-tube internal construction for improved ride quality and durability.
• 16-level linear damping force adjustment to fine-tune compression and rebound.
• Full-length ride height adjustment system with independent spring preload settings.
• Sealed structure for high reliability and consistent performance.
• Signature Tein green powder coating and ZT coating for superior corrosion resistance.
• Complete set of four coilovers designed for a direct-fit installation.

Fits 1993-1996 Mazda RX-7 (FD3S).

The Tein Flex Z coilover system offers a versatile, high-performance suspension solution for the FD3S chassis, balancing aggressive track handling with streetable ride quality. Built as a successor to the Street Flex, the Flex Z features a twin-tube internal design that provides consistent damping over varying road surfaces. This kit allows for full ride height adjustability via the lower bracket, ensuring you can dial in the perfect stance without affecting spring stroke or preload.

• 16-level damping force adjustment to fine-tune compression and rebound characteristics simultaneously.
• Twin-tube system for improved comfort and better followability on rougher roads.
• Full-length ride height adjustment allows independent tuning of height and spring preload.
• Includes vehicle-specific upper mounts designed for a direct bolt-on installation.
• Coated with Tein's specialized green powder coating and Z-Link anti-rust treatment for superior corrosion resistance.
• Replaceable cartridge construction allows for easy long-term maintenance and servicing.

Fits 1993-1998 Nissan Silvia and 1995-1998 Nissan 240SX (S14).

The Tein Flex Z damper kit provides a high-performance suspension solution for the S14 chassis, balancing street drivability with aggressive handling characteristics. This system features a twin-tube internal design for a smoother stroke and better compliance over varied road surfaces. Unlike basic sleeve-over kits, the Flex Z utilizes a full-length ride height adjustment system, allowing you to set the vehicle's stance by adjusting the lower bracket without altering the spring preload or losing damper travel.

• Twin-tube internal construction for optimized street and track performance.
• 16-level linear damping force adjustment for precise tuning of rebound and compression.
• Full-length ride height adjustment allows for independent height and preload settings.
• Powder-coated damper bodies with Tein's ZT coating on threads for superior corrosion resistance and ease of adjustment.
• Includes vehicle-specific upper mounts for a direct-bolt installation to factory mounting points.
• EDFC compatible for in-cabin electronic damping control (sold separately).

Fits 1993-1998 Nissan Skyline (ECR33, ER33, and HR33 chassis codes).

The Tein Flex Z coilover system offers a versatile suspension solution for the R33 Skyline, balancing street comfort with track-ready handling. These coilovers utilize a twin-tube internal design to provide a stable, smooth stroke that absorbs road imperfections while maintaining chassis control. Unlike entry-level kits, the Flex Z features full-length ride height adjustment, allowing you to lower your vehicle by adjusting the bracket position without sacrificing spring preload or damper travel.

• 16-level linear damping force adjustment for simultaneous compression and rebound control
• Full-length ride height adjustment system with movable lower bracket
• Twin-tube construction for superior ride quality and reliability
• Includes upper mounts specifically designed for the R33 chassis
• ZT coated adjustment threads for maximum corrosion resistance and durability
• Compatible with Tein EDFC series for in-cabin damping adjustment
• Precision-made in Yokohama under strict quality standards

Fits 2016-2024 Infiniti Q50 (V37) models.

The Tein Flex Z Coilover Kit is a high-quality, full-length adjustable suspension system engineered to balance street comfort with performance handling. Designed specifically for the V37 chassis, the Flex Z utilizes a twin-tube internal structure to provide a smooth ride over varied road surfaces while maintaining control during spirited driving. Unlike basic sleeve-over kits, this full-length system allows you to adjust your vehicle's ride height by moving the lower bracket, ensuring full suspension stroke and spring preload are maintained regardless of how low the car is set.

• 16-level damping force adjustment for precise tuning of rebound and compression
• Twin-tube structure for improved stroke and low-speed comfort
• Full-length height adjustment system preserves spring travel at all heights
• Includes upper mounts (reinforced rubber or pillowball depending on application)
• ZT coated threaded bodies for superior corrosion resistance against the elements
• Sealed structure design for high reliability and manufacturing precision
• Compatible with Tein EDFC series for electronic damping control from the cabin

Each Flex Z kit is produced in Tein's Yokohama plant, ensuring strict adherence to Japanese quality standards. This kit replaces the factory strut and spring assemblies to eliminate wheel gap, reduce body roll, and improve steering feedback without the harshness often associated with entry-level coilovers.

Fits 2016-2021 Honda Civic (FC1, FC2, FC3, and FC4 chassis).

Tein Flex Z coilovers offer a high-performance suspension solution for the 10th generation Honda Civic, engineered to balance street comfort with improved cornering response. This full-length adjustable system allows you to set your vehicle's ride height independently of spring preload, ensuring you maintain full damper stroke even at lower ride heights.

• Twin-Tube Construction: Designed for a smooth, compliant ride on the street while maintaining control during spirited driving.
• 16-Level Damping Adjustment: Features a needle valve system to precisely tune the damping force for different driving conditions.
• Full-Length Height Adjustment: Separate ride height and spring preload adjustments allow for a customized stance without sacrificing comfort.
• Corrosion Resistance: Finished with Tein's specialized "ZT" coating to withstand harsh weather and road salts.
• Chassis Specific: Developed specifically for the FC1, FC2, FC3, and FC4 chassis to ensure optimal suspension geometry and fitment.

Fits 2014-2015 Honda Civic and 2016-2022 Acura ILX (FB6/DE2).

Tein Flex Z coilovers provide a balanced suspension solution for drivers seeking a combination of daily comfort and improved handling performance. Featuring a twin-tube internal design, these dampers offer a longer stroke compared to mono-tube alternatives, resulting in superior ride quality on uneven road surfaces. The Flex Z series is engineered with a full-length adjustment system, which allows for precise ride height changes via the threaded shock body without affecting spring preload or suspension travel.

• Twin-tube internal construction for optimized street performance and comfort
• 16-level linear damping force adjustment to fine-tune compression and rebound
• Full-length ride height adjustment system maintains full stroke at any height
• Signature Tein green powder-coated finish for maximum corrosion resistance
• Direct bolt-on fitment for FB6 and DE2 chassis platforms

Fits 2012-2015 Honda Civic (FB2, FB9, FG3, FG4) models.

Tein Flex Z coilovers are engineered to provide a balanced combination of ride comfort and improved handling for street-driven vehicles. This complete suspension system replaces the factory struts and springs with a twin-tube design that maintains a supple ride on rough surfaces while offering 16 levels of linear damping adjustment. The full-length adjustment allows you to set your preferred ride height by moving the lower bracket, ensuring that spring preload and suspension stroke remain optimal regardless of how low the vehicle is set.

• Twin-tube internal construction for improved damping stability on varied road surfaces.
• 16-level damping force adjustment to tune for comfort or spirited driving.
• Full-length height adjustment system allows ride height changes without affecting spring stroke.
• Includes reinforced rubber or pillowball upper mounts for a complete bolt-on installation.
• High-durability ZT coating on the shock body for superior corrosion resistance.
• Note: 2014-2015 model year vehicles require Tein adapter kit SPS12-Q7848 for installation.

Fits select 1998-2002 Honda Accord models.

The Tein Flex Z coilover kit is a comprehensive suspension solution designed to replace factory shock absorbers and springs. This kit provides the ability to tune your vehicle's ride height while maintaining a balance between daily driving comfort and improved handling responsiveness. Engineered as a direct-fit upgrade, it is an ideal choice for sixth-generation Accord owners looking to enhance their vehicle's performance and appearance.

• Fits 1998-2002 Honda Accord models
• Full-length height adjustability for a customized stance
• Designed to improve cornering stability and steering feel
• High-quality Tein construction for long-term reliability
• Complete kit replaces all four factory struts and springs

Fits 2000-2009 Honda S2000 (AP1 and AP2 chassis).

The Tein Flex Z coilover system provides a high-quality, full-length adjustable suspension solution for S2000 owners seeking a balance between daily drivability and track-ready performance. Unlike basic sleeve kits, the Flex Z series utilizes a twin-tube design for a smoother stroke and features a sealed structure to maximize durability while maintaining a competitive price point.

Each kit is delivered as a complete assembly with top mounts already included, simplifying the installation process and ensuring your factory rubber mounts are replaced with fresh hardware. The 16-level damping force adjustment allows you to fine-tune the rebound and compression to match your tire setup or preferred road feel, and it is fully compatible with Tein EDFC systems for electronic cockpit control.

• Full-length ride height adjustment allows for corner balancing without affecting spring preload or stroke.
• Twin-tube internal construction for improved comfort on uneven surfaces.
• 16-level damping force adjustment (rebound and compression combined).
• High-strength steel construction with ZT coating for superior corrosion resistance against road salts and debris.
• Includes reinforced rubber or pillow ball upper mounts tailored for the Honda S2000 chassis.
• Compatible with Tein EDFC (Electronic Damping Force Controller) for in-cabin tuning.

Enhance the handling and stance of your 1997-2001 Acura Integra (DC2) with the Tein Flex Z coilover system. Designed for drivers seeking a balance between daily street comfort and performance driving, the Flex Z series utilizes a twin-tube internal structure to provide a smooth ride over varied road surfaces while maintaining precise control during spirited cornering.

This kit features full-length height adjustment, allowing you to set your preferred ride height without affecting spring preload or stroke. The 16-level damping force adjustment enables you to fine-tune the suspension for different driving conditions or passenger loads. Constructed with Tein's signature green powder coat and ZT coating for superior corrosion resistance, these coilovers are built to withstand the elements.

• Fits 1997-2001 Acura Integra (DC2)
• Twin-tube internal structure for improved ride quality
• 16-level damping force adjustment (compression and rebound combined)
• Full-length ride height adjustment system for independent height and preload setup
• Includes reinforced rubber or pillowball upper mounts
• Compatible with Tein EDFC series for electronic damping control
• High-performance ZT coating for protection against rust and road debris

Fits 1991-2006 Acura NSX (NA1/NA2) models.

The Tein Flex Z Coilover Kit provides a comprehensive suspension solution for the Acura NSX, balancing street comfort with high-level tuning capabilities. Utilizing a twin-tube system for superior ride quality on varied road surfaces, these coilovers feature full-length ride height adjustment, allowing you to set your preferred stance without sacrificing suspension stroke or spring preload. This design ensures the damping characteristics remain consistent regardless of the ride height setting.

Built for durability, the Flex Z dampers feature Tein's proprietary Z-index powder coating on the shell case and a specialized fluorinated surface treatment on the threads to prevent corrosion and seizing. The 16-level linear damping force adjustment allows you to fine-tune the suspension for daily driving or spirited weekend use. This kit is a complete solution, including upper mounts for a direct-replacement installation to the factory chassis points.

• Twin-tube internal construction for improved street comfort
• Full-length ride height adjustment system
• 16-level linear damping force adjustment (compression and rebound)
• High-durability Z-index anti-corrosion coating on damper bodies
• Powder-coated springs and zinc-plated lower brackets
• Includes upper mounts for front and rear
• Compatible with Tein EDFC systems for electronic damping control

Tein Flex Z coilovers provide a comprehensive suspension upgrade for the 6th generation Honda Civic, delivering a balance of street comfort and performance handling. This full-length adjustable system allows you to set your vehicle's ride height independently of spring preload, ensuring you maintain full damper stroke even at lower ride heights. The twin-tube design is specifically engineered for street applications, offering a more compliant ride over varied road surfaces while maintaining precise control during spirited driving.

Every Flex Z kit is manufactured in Yokohama, Japan, and features Tein's proprietary ZT coating to resist corrosion and seizing, even in harsh winter environments. The kit comes complete with upper mounts, making it a bolt-on solution that replaces the entire factory strut and spring assembly.

• Full-length ride height adjustment for independent height and preload settings
• 16-level damping force adjustment to fine-tune compression and rebound
• Twin-tube internal structure for enhanced street drivability
• High-durability ZT coating for superior corrosion resistance
• Cold-formed SAE9254 steel springs for sag resistance
• Upper mounts included for simplified installation
• Compatible with Tein EDFC series for in-cabin damping control

Fits 2018-2024 Tesla Model 3 and 2021-2024 Tesla Model Y (4WD models only).

Tein Flex Z coilovers deliver a comprehensive suspension solution for Tesla Model 3 and Model Y owners looking to improve handling and aesthetics without sacrificing ride quality. This system features a twin-tube internal design, providing a longer stroke compared to mono-tube setups for better compliance and comfort during daily commutes. With 16 levels of damping force adjustment, you can quickly transition from a compliant street setting to a firmer profile for improved cornering stability.

The Flex Z series utilizes a full-length adjustment system, allowing ride height to be set by moving the lower bracket rather than compressing the spring. This preserves full suspension stroke and ride quality even at lower ride heights. Each damper body is treated with Tein's proprietary ZT coating to resist corrosion and ensure smooth height adjustments over the life of the kit.

• 16-level damping force adjustment (simultaneous compression and rebound)
• Twin-tube internal structure for optimized street performance and comfort
• Full-length ride height adjustment with independent spring preload
• High-strength steel construction with ZT coating and green powder coat finish
• Cold-wound SAE9254 steel springs for durability and sag resistance
• Designed and manufactured under strict Japanese quality standards

Fits 2008-2017 Mitsubishi Lancer (CY4A).

Tein Flex Z coilovers deliver a comprehensive suspension solution for the 2008-2017 Mitsubishi Lancer, balancing street-legal comfort with aggressive handling capabilities. This kit utilizes a twin-tube internal design, providing a longer stroke to better absorb road imperfections while maintaining chassis control. Unlike traditional height-adjustable shocks, the Flex Z features a full-length adjustment system, allowing you to set your preferred ride height without altering spring preload or compromising suspension travel.

• 16-level damping force adjustment (simultaneous compression and rebound)
• Full-length ride height adjustment system with independent spring preload
• Includes vehicle-specific upper mounts (front camber adjustable plates where applicable)
• Twin-tube internal construction for enhanced street comfort and durability
• ZT coated damper bodies for superior corrosion resistance in harsh environments
• Cold-formed high-tensile steel springs designed to resist sagging
• Sealed damper structure for cost-effective performance and reliability

Fits 2008-2016 Mitsubishi Lancer Evolution X (CZ4A).

Tein Flex Z coilovers deliver a versatile suspension solution for the Evo X, engineered to balance aggressive handling with daily-driver comfort. These coilovers utilize a twin-tube internal structure, which provides a longer stroke and lower friction than mono-tube designs, resulting in a smoother ride over varied road surfaces. The system features 16 levels of linear damping adjustment, allowing you to quickly transition between street-compliant settings and a firmer response for spirited driving or track sessions.

As a full-length adjustable kit, the Flex Z allows for independent ride height and spring preload adjustments. This ensures your CZ4A maintains optimal suspension travel and geometry even when significantly lowered. The dampers are finished with Tein's proprietary ZT coating to resist corrosion and ensure the adjustment threads remain functional in harsh environments.

• Twin-tube internal structure for improved ride quality and reliability
• 16-level damping force adjustment (compression and rebound combined)
• Full-length height adjustment system with independent preload settings
• Includes vehicle-specific upper mounts (pillowball or reinforced rubber) for direct bolt-on installation
• High-durability ZT coating for superior rust and weather resistance
• Compatible with Tein EDFC systems for electronic damping control from the cockpit

Fits 2006-2011 Lexus GS300, GS350, GS430, and GS450H models.

The Tein Flex Z coilover system provides a high-quality, adjustable suspension solution for the third-generation Lexus GS. Engineered for a balance between street comfort and improved handling, the Flex Z series utilizes a twin-tube design to maintain a smooth stroke and reliable performance on varied road surfaces. These coilovers feature full-length ride height adjustment, allowing for a lowered stance without sacrificing damper stroke or spring preload.

• Twin-tube internal construction for enhanced street-focused ride quality
• 16-level damping force adjustment (simultaneous compression and rebound)
• Full-length ride height adjustment system with independent spring preload
• High-durability powder coating and ZT-coated threads for superior corrosion resistance
• Compatible with Tein EDFC (Electronic Damping Force Controller) series
• Includes reinforced rubber or pillowball top mounts and all necessary installation hardware

Fits 2022-2024 Subaru WRX (VBA) models.

The Tein Flex Z coilover system provides a versatile suspension solution for the 2022+ Subaru WRX, balancing daily street comfort with the precision required for spirited driving. This kit features a twin-tube internal structure for a supple ride over varied road surfaces while maintaining consistent damping performance. Unlike entry-level kits, the Flex Z utilizes a full-length adjustment system, allowing you to set your ride height by moving the lower bracket without affecting spring preload or suspension stroke.

• 16-level linear damping force adjustment for fine-tuning compression and rebound
• Twin-tube structure for improved ride quality and stroke
• Full-length height adjustment system with independent spring preload
• Includes reinforced rubber or pillowball upper mounts for simplified installation
• High-durability ZT coating on adjustment threads to resist corrosion and seizing
• EDFC (Electronic Damping Force Control) compatible for in-cabin adjustments
• Finished in Tein signature green powder coat for maximum weather resistance

Fits 2009-2014 Acura TSX (CS2, CP3, CU2, CU4, CW2).

The Tein Flex Z damper kit provides a high-performance suspension solution for the second-generation Acura TSX, balancing street comfort with aggressive handling. Utilizing a twin-tube internal design, these coilovers offer superior ride quality by maintaining sufficient stroke over uneven pavement. The 16-level linear damping adjustment allows you to fine-tune the suspension for different driving conditions using Tein's precision needle valve technology.

Flex Z coilovers feature full-length ride height adjustment, which enables you to lower the vehicle center of gravity without sacrificing spring travel or damper stroke. To ensure long-term reliability and ease of adjustment, the shock bodies are finished in Tein's signature green powder coating, while the adjustment threads feature a specialized ZT coating to resist corrosion and debris buildup even in harsh environments.

• Twin-tube internal construction for improved street comfort and stroke
• 16-level damping force adjustment (compression and rebound combined)
• Full-length ride height adjustment system preserves shock travel
• Sealed structure for manufacturing efficiency and cost-effective reliability
• Includes upper mounts for a direct-replacement installation
• High-durability ZT coating for smooth height changes in all weather conditions
• Finished in Tein green powder coating for maximum corrosion resistance

Fits 2006-2011 Honda Civic sedan and coupe models (FA1, FA5, FG1, FG2).

The Tein Flex Z coilover system provides a high-performance suspension solution for 8th Generation Honda Civic owners looking to improve handling and dial in their vehicle's stance. This kit features a twin-tube internal design for improved ride comfort on the street while maintaining enough damping control for spirited driving. Unlike traditional coilovers, the Flex Z series utilizes full-length adjustability, which allows you to change your ride height by adjusting the case length rather than compressing the spring, ensuring you maintain full suspension travel at any height.

• 16-level linear damping force adjustment (combined compression and rebound)
• Twin-tube internal construction for superior street comfort
• Full-length height adjustment system with independent preload settings
• High-durability powder-coated finish in Tein signature green
• Complete kit includes front and rear dampers, springs, and adjustment wrenches

Fits 2018-2024 Tesla Model 3 and 2020-2024 Tesla Model Y (AWD models).

The Tein Flex Z coilover kit provides a versatile suspension solution for Tesla owners looking to balance street comfort with improved handling and a lowered stance. Developed as the successor to the Street Flex series, the Flex Z features a twin-tube system for a smooth ride on various road surfaces and a full-length ride height adjustment system that allows you to lower your vehicle without sacrificing suspension stroke.

These coilovers utilize a 16-level damping force adjustment system (compression and rebound combined) using Tein's Needle Valve technology, giving you precise control over your vehicle's damping characteristics. To ensure long-term durability and resistance to the elements, the shock bodies are finished in Tein's signature green powder coating and utilize ZT-coated adjustment threads to prevent seizing.

• Twin-tube internal construction for superior street comfort
• 16-level damping force adjustment for personalized ride quality
• Full-length height adjustment via the lower bracket
• Compatible with EDFC series (sold separately) for in-car electronic damping control
• High-tensile SAE9254 cold-formed springs
• ZT Coating on shell case for excellent corrosion resistance
• Sealed-structure shock absorbers for cost-effective manufacturing and high reliability

Fits 2022-2024 Honda Civic FWD (FL1) models.

Tein Flex Z coilovers provide a complete suspension solution for drivers looking to tune their vehicle's ride height and damping characteristics. This full-length adjustable system allows for lowering your vehicle's center of gravity without affecting spring stroke, ensuring consistent performance and ride quality even at aggressive heights. The twin-tube design is engineered for street performance, maintaining a high level of ride comfort while providing the responsiveness needed for spirited driving.

• Specifically designed for the 2022+ Honda Civic FWD (FL1) chassis
• Full-length height adjustability for independent ride height and spring preload settings
• 16-level damping force adjustment for precision compression and rebound tuning
• Twin-tube internal structure for improved comfort and durability on varied road surfaces
• High-durability powder coating and ZT coated adjustment threads for superior corrosion resistance
• Includes all necessary hardware and adjustment wrenches for installation

Fits 2017-2021 Honda Civic (FK7) Hatchback (1.5L).

Tein Flex Z coilovers provide a comprehensive suspension solution for the FK7 chassis, balancing daily driving comfort with the precision needed for spirited performance. Unlike basic kits, the Flex Z series features a full-length ride height adjustment system, allowing you to set your preferred stance without sacrificing suspension stroke or spring preload.

The twin-tube internal structure is specifically engineered for ride quality on the street, while the 16-level linear damping force adjustment allows you to fine-tune the suspension to your specific driving style. These coilovers come as a complete kit, including integrated upper mounts to ensure a direct, bolt-on installation into the factory mounting points.

• 16-level linear damping force adjustment (combined compression and rebound)
• Full-length ride height adjustment system
• Twin-tube construction for improved street comfort
• High-durability powder coating and ZT surface treatment for corrosion resistance
• Includes reinforced rubber or pillowball upper mounts

Fits 2003-2007 Honda Accord models with CM5, CM6, CM7, and CM8 chassis codes.

The Tein Flex Z coilover system provides a high-quality, full-length adjustable suspension solution designed for drivers seeking a balance between street comfort and improved handling. Unlike entry-level kits, the Flex Z series features a twin-tube internal design to maintain ride quality on daily commutes while allowing for significant lowering without sacrificing suspension stroke.

• Full-length ride height adjustment via the shock body maintains full damper travel and spring preload
• 16-level linear damping force adjustment allows for precise tuning of compression and rebound
• Twin-tube construction for improved reliability and street-friendly damping characteristics
• Includes pre-assembled upper mounts for a direct bolt-on installation to factory mounting points
• High-durability ZT coating on adjustment threads and powder-coated damper bodies for superior corrosion resistance
• Compatible with Tein EDFC (Electronic Damping Force Control) for in-cabin adjustment