Fits 1989-2002 Nissan Skyline GT-R (R32, R33, and R34 models).

The Driveshaft Shop Level 5 V2 front axle is engineered to handle the extreme torque loads of high-horsepower ATTESA E-TS all-wheel-drive systems. Designed for GT-R builds pushing up to 1000HP, this right-side front axle replaces the factory unit with a significantly stronger assembly capable of withstanding hard launches and high-traction environments. The V2 designation represents the latest iteration of DSS high-performance axle technology, featuring improved materials and internal tolerances to ensure reliability when OEM components would typically fail.

• Manufacturer: Driveshaft Shop (DSS)
• Series: Level 5 V2
• Position: Front Right (Passenger Side)
• Power Rating: 1000HP
• Application: Nissan Skyline GT-R R32, R33, R34 (1989-2002)
• Part Number: RA8011X5-V2

Maintain the precision and engagement of your multi-disc clutch system with the Comp1 Lower Floater Plate. This replacement component (part number 4-8026-C) is engineered to restore factory-spec tolerances between friction surfaces, ensuring smooth release and consistent torque transfer under high-stress driving conditions.

In a multi-disc setup, the floater plate is critical for heat dissipation and maintaining the alignment of the clutch pack. Over time, aggressive heat cycles can cause warping or surface wear on original plates, leading to clutch drag or erratic engagement. This lower floater plate is manufactured from high-tensile steel to resist distortion and provide a true, flat surface for the friction discs to bite into.

• Manufacturer Part Number: 4-8026-C
• Position: Lower floater plate
• Construction: High-tensile steel for heat resistance and durability
• Application: Direct replacement for Comp1 multi-disc clutch assemblies
• Ensures proper stack height and consistent pedal feel

This Comp1 Clutch throw out bearing is engineered specifically for use with K20-series twin disc clutch assemblies. In high-performance multi-disc setups, the release bearing (also known as a throw-out bearing) must withstand increased heat and higher pressure plate diaphragm loads compared to standard single-disc configurations.

• Optimized for twin disc clutch stack heights and release characteristics
• Designed for Honda K20-series engines and transmissions
• Provides the necessary contact surface for Comp1 Clutch multi-disc pressure plates
• Ensures smooth engagement and consistent clutch pedal feel

Replacing the release bearing during clutch service is essential for maintaining drivetrain reliability. This bearing is built to handle the rigorous demands of tuned K-Series builds utilizing a twin-plate system.

Ensure consistent torque transfer and precise engagement by refreshing your multi-plate system with this Comp1 Clutch replacement middle disc. Designed specifically as a service component for Honda and Acura B-Series engines equipped with hydraulic transmissions, this disc allows you to maintain the performance of your Triple Disc assembly without the expense of a full kit replacement.

• Fits Honda/Acura B-Series engines with hydraulic transmissions
• Position: Middle Disc Only
• Direct replacement for Comp1 Triple Disc clutch kits
• Critical for maintaining proper stack height and friction surface integrity

Fits select 2002-2011 Acura RSX and Honda Civic Si (2.0L 6-Speed).

The Competition Clutch Rigid Triple Disc Clutch Kit is engineered for high-horsepower K-Series builds that require maximum torque capacity and reliable engagement under extreme track or drag conditions. By utilizing a specialized triple-disc configuration, this kit provides a massive increase in friction surface area to manage high-output engines without the footprint of an oversized single-disc unit. Designed for the 6-speed manual transmission, it replaces the factory clutch assembly with a competition-grade solution built for durability.

• Rigid hub design for direct engagement and reduced rotational mass
• Triple-disc configuration for superior thermal capacity and torque holding
• Optimized for high-RPM K20 engine applications
• Includes pressure plate, three discs, and necessary hardware

Fits 2006-2016 Subaru WRX (2.5L).

The Comp1 Clutch 230mm Twin Disc Organic Clutch Kit is engineered to manage increased torque loads in modified EJ25-powered WRX models while maintaining the drivability required for a street-driven vehicle. By utilizing a multi-plate design with two 230mm organic friction discs, this setup provides a significant increase in surface area compared to the factory single-disc unit. This configuration allows for higher power holding capacity without the aggressive chatter or heavy pedal effort often found in ceramic or single-disc performance clutches.

• Clutch Type: Twin Disc
• Disc Diameter: 230mm
• Friction Material: Organic
• Application: 2006-2016 Subaru WRX (2.5L)
• Design: Multi-plate for high torque capacity and smooth engagement

The COBB Adjustable Shifter (MPN: 224X01P-WK-WT) provides a significant upgrade to your vehicle's tactile feedback and shifting precision. This unit is designed to replace the factory assembly, allowing for fine-tuned adjustments to both the shift throw distance and the height of the shift knob to suit your specific driving style.

• Fully adjustable throw and height for a customized gear-change experience
• Precision-machined construction ensures long-term durability and consistent performance
• Designed to improve shift feel and reduce the slop often found in factory components
• Direct replacement for the original shifter assembly
• Manufacturer Part Number: 224X01P-WK-WT

The COBB Adjustable Shifter (224X01P-WK-BK) offers drivers the ability to customize their shifting ergonomics by independently adjusting both the throw length and the shifter knob height. This dual-adjustment capability allows you to fine-tune the leverage and travel of your gear changes, moving away from the vague feel of a factory setup toward a more precise, tactile engagement.

• Dual-adjustable design for personalized shift throw and knob height
• Precision machined components for durable, smooth operation
• Direct replacement for the factory shifter assembly
• Reduces shift travel for faster, more positive gear changes
• Manufacturer Part Number: 224X01P-WK-BK

The COBB Adjustable Shifter provides complete control over your vehicle's shift ergonomics and gear engagement. Designed to replace the factory lever, this component allows drivers to independently tune both the throw distance and the height of the shift knob, eliminating the vague and rubbery sensation typical of OEM shifters. This results in a crisp, mechanical feel that improves confidence during both spirited driving and daily use.

• Independently adjustable shift throw and knob height for a personalized interface
• Precision-machined construction ensures consistent gate engagement and durability
• Reduces shift travel for faster, more accurate gear changes
• Direct replacement for the original shift lever with no permanent modifications required
• Manufacturer Part Number: 224X01P-TW-WT

By shortening the shift throw, you decrease the time spent between gears, while the height adjustment allows you to position the shift knob exactly where it feels most natural. This shifter is engineered to withstand the rigors of aggressive shifting while maintaining a smooth, high-quality action that factory units cannot match.

COBB Shifter Cable Bushings replace the compliant factory rubber bushings at the end of the shift cables where they connect to the transmission gear selector. By swapping soft rubber for these precision-engineered components, you eliminate the "spongy" or "mushy" sensation often felt during gear engagement, resulting in a significantly more tactile and mechanical shifting experience.

This upgrade is designed to improve shifting precision and consistency under both daily driving and spirited conditions. Each bushing is manufactured to tight tolerances to ensure a snug fit, reducing cable end play and preventing the degradation common with OEM rubber components exposed to engine bay heat and vibration.

• Replaces soft factory rubber bushings for improved gear-change feedback
• Eliminates cable end slop for more precise gate entry
• Direct-fit replacement for the original equipment bushings
• Durable construction designed to withstand high-heat environments
• Manufacturer Part Number: 224X01P-TW-BK

The Cobb Stage 2+ Drivetrain Package for the Subaru STI 6-speed manual transmission (6MT) transforms the shifting experience by reducing mechanical slop and improving gear engagement. This comprehensive kit replaces vague factory components with performance-engineered hardware to provide a shorter, more precise throw and a more connected feel between the driver and the gearbox.

This package combines mechanical precision with custom aesthetics, featuring a weighted white shift knob designed to provide additional inertia for smoother shifts. The included White/Race Red reverse lockout is CNC-machined to replace the factory plastic unit, offering a tactile improvement and a high-end finish for your STI's interior. All components are designed for a direct-fit installation with no permanent vehicle modifications required.

• Fits Subaru WRX STI with 6-speed manual transmission (6MT)
• Stage 2+ drivetrain upgrade for enhanced shifting precision
• Includes a weighted white shift knob for improved shift feel and inertia
• Features a white and race red reverse lockout for improved durability and style
• Reduces shift throw and side-to-side play for a tighter gear gate
• Manufacturer Part Number: 215X02P-WK-WT-RDWT

Upgrade the shifting precision and interior aesthetics of your Subaru STI with the Cobb Stage 2+ Drivetrain Package (MPN 215X02P-WK-WT-RDBK). This kit is engineered specifically for the 6-speed manual transmission (6MT), replacing the factory interface with components designed to eliminate mechanical slop and provide more positive gear engagement.

• Weighted White Shift Knob: The increased mass of the weighted knob provides better leverage and smoother throws, making gear transitions more effortless during spirited driving.
• Race Red Reverse Lockout: Replaces the OEM plastic piece with a precision-machined component, adding durability and a high-performance visual accent to the center console.
• Stage 2+ Integration: Designed as a comprehensive solution to enhance the tactile feedback and response of the STI drivetrain.
• Direct Fitment: Engineered to install directly into the factory location without the need for permanent vehicle modifications.

By optimizing the connection between the driver and the transmission, this package ensures more accurate shifts and a more connected driving experience. Part Number: 215X02P-WK-WT-RDBK.

The Cobb Tuning Stage 2+ Drivetrain Package is a comprehensive upgrade designed to eliminate the vague, rubbery gear selection found in the factory Subaru STI 6MT. This kit combines the Double Adjustable Shifter with firm polyurethane bushings and a weighted knob to provide a precise, mechanical shifting experience and shorter throws.

The included Cobb Double Adjustable Shifter allows for independent adjustment of both the shift height and the throw length, enabling you to dial in the ergonomics of your cockpit. By replacing the soft factory bushings with the included polyurethane front and rear units, you remove unwanted deflection in the linkage, ensuring every gear gate is easy to find. The package is rounded out with a weighted knob and a custom reverse lockout to improve shift momentum and interior aesthetics.

• Double Adjustable Shifter: CNC-machined steel construction with independent height and throw tuning.
• Front and Rear Shifter Bushings: High-durometer polyurethane to minimize drivetrain slop and linkage flex.
• Weighted White Knob: Increases leverage and mass for smoother gear engagement.
• Reverse Lockout: White and Stealth Black finish replaces the plastic OEM unit for improved durability and feel.
• Manufacturer Part Number: 215X02P-WK-WT-BKWT

The Cobb Stage 2+ Drivetrain Package is a comprehensive upgrade designed to eliminate the vague, rubbery feel of the factory shifter in your Subaru STI 6MT. This kit replaces key components to provide a shorter, crisper throw and more mechanical engagement, ensuring every gear change is precise and deliberate.

• Weighted White Knob: Adds mass to the shift lever to improve throw momentum and ergonomics while providing a clean aesthetic.
• Stealth Black Lockout: A precision-machined reverse lockout that provides a tactile, premium feel and improved durability over the factory plastic unit.
• Shift Precision: Engineered to reduce shift gate slop and improve overall drivetrain feedback during spirited driving.
• Direct Compatibility: Fits Subaru STI models equipped with the 6-speed manual transmission (6MT).
• Manufacturer Part Number: 215X02P-WK-WT-BKBK

Fits Subaru WRX STI models equipped with the factory 6-speed manual transmission (6MT).

The Cobb Stage 2+ Drivetrain Package is engineered to eliminate the vague, rubbery feel of the factory shifter assembly. By replacing the high-compliance rubber bushings and the long-throw factory lever, this kit provides a shorter, more deliberate shift gate and significantly reduced deflection. The adjustable shifter allows for fine-tuning of both shift throw and knob height to suit your driving style, while the included urethane bushings ensure every gear engagement is crisp and mechanical.

This specific package features a weighted black shift knob to provide additional kinetic energy during shifts and an anodized White/Race Red reverse lockout for a premium tactile experience and enhanced interior aesthetics.

• Adjustable short shifter for customizable throw distance and height
• High-durometer urethane front and rear stay bushings reduce shifter slop
• Weighted black shift knob for smoother gear synchronization
• 6061 aluminum reverse lockout with White/Race Red finish
• Direct-fit installation replaces OEM components
• Manufacturer Part Number: 215X02P-WK-BK-RDWT

Fits Subaru STI models equipped with the 6-speed manual transmission (6MT).

The Cobb Stage 2+ Drivetrain Package is engineered to eliminate the vague, rubbery sensation often associated with the factory shifter setup. This comprehensive kit improves shift precision and tactile feedback, transforming the connection between the driver and the gearbox. By combining upgraded drivetrain components with premium touchpoints, it provides a more positive engagement and smoother gear transitions.

• Weighted Black Shift Knob: Adds mass to the shifter to improve throw inertia and gear engagement.
• Race Red Reverse Lockout: A precision-machined upgrade that replaces the factory plastic unit for increased durability and a custom look.
• Optimized Shift Feel: Reduces drivetrain slop and improves mechanical leverage.
• Manufacturer Part Number: 215X02P-WK-BK-RDBK

Fits Subaru STI models equipped with the 6-speed manual transmission (6MT).

The Cobb Stage 2+ Drivetrain Package is engineered to improve the shifting tactile feel and mechanical precision of your Subaru STI. This comprehensive kit replaces vague factory components with high-performance hardware designed for durability and a more connected driving experience. The weighted shift knob provides additional leverage and mass to smooth out gear engagement, while the upgraded reverse lockout eliminates the play found in the OEM plastic assembly.

• Weighted Black Shift Knob: Increases throw momentum for smoother gear synchronization and a premium hand-feel.
• Reverse Lockout: Precision-machined with a White/Stealth Black finish to replace the factory plastic unit.
• Subaru 6MT Optimization: Specifically calibrated for the STI 6-speed drivetrain to provide crisp, confident shifts.
• Manufacturer Part Number: 215X02P-WK-BK-BKWT

The Cobb Stage 2+ Drivetrain Package provides a comprehensive overhaul for the Subaru STI 6-speed manual transmission linkage, designed to eliminate the vague, rubbery feel inherent in the factory setup. This kit centers on Cobb’s double-adjustable short shifter, allowing drivers to customize both throw length and shift knob height to their preference.

By replacing the soft OE bushings with firmer polyurethane components, this package significantly reduces shifter slop and deflection for more precise gear engagement. The included weighted black shift knob adds mass to the gear selector for smoother throws, while the stealth black reverse lockout provides a durable, high-quality replacement for the plastic factory unit.

• Fits Subaru STI models with 6-speed manual transmission (6MT)
• Double Adjustable Short Shifter for throw and height customization
• Urethane front and rear shifter bushings for reduced deflection
• Weighted black shift knob for improved shift leverage
• CNC-machined stealth black reverse lockout
• Manufacturer Part Number: 215X02P-WK-BK-BKBK

Fine-tune your gear changes with the COBB Tuning Adjustable Shifter, designed to provide a firm, precise shift feel while allowing for customized ergonomics. This shifter kit solves the problem of vague factory gear selection by replacing the rubbery stock components with a rigid, high-quality mechanism that offers adjustable throw and shift knob height. Whether you prefer a short, notched throw for performance driving or a more comfortable height for daily commuting, this unit allows for independent adjustments to meet your specific preference.

• Independently adjustable shift throw and knob height for personalized ergonomics
• Machined from high-quality materials to ensure durability and a mechanical shift feel
• Includes a COBB red shift knob and matching red reverse lockout collar
• Direct replacement for the factory shifter assembly
• Manufacturer Part Number: 215X02P-W-RD-KNOB-W-RD-LOCKOUT

The COBB Adjustable Shifter provides complete control over your vehicle's gear-change ergonomics, allowing you to fine-tune both shift throw and knob height to suit your driving style. By reducing the distance between gears and repositioning the knob, you can achieve a more precise, tactile feel that eliminates the vague, rubbery sensation often found in factory assemblies.

• Independent Adjustability: Separate adjustments for shift throw and height allow for a tailored shifting experience without compromising one for the other.
• Red COBB Shift Knob: Includes a high-quality red knob designed for a comfortable, secure grip during spirited driving.
• Black Reverse Lockout: Features a black anodized reverse lockout collar for a clean look and reliable engagement.
• Robust Construction: Engineered to withstand heavy shifting loads with minimal flex, ensuring consistent performance on the street or track.
• Manufacturer Part Number: 215X02P-W-RD-KNOB-W-BK-LOCKOUT

The COBB Adjustable Shifter allows you to customize your vehicle's gear-changing experience by providing independent adjustment for both shifter height and throw length. This dual-adjustability enables you to set the perfect ergonomic position while significantly shortening the distance between gears for faster, more precise shifts.

Built to replace the factory unit, this shifter eliminates the vague, rubbery feel of stock linkages with precision-engineered components. This specific configuration includes a weighted red COBB shift knob and a matching red anodized reverse lockout for a striking, performance-oriented interior look. The CNC-machined construction ensures long-term durability under demanding driving conditions.

• Independent adjustment for shift height and throw length
• Reduces shift distance for improved engagement speed
• Includes weighted red shift knob for smoother gear transitions
• Matching red anodized reverse lockout
• High-strength CNC machined construction
• Manufacturer Part Number: 215X02P-W-RD-KNOB-RD-LOCKOUT

The COBB Adjustable Shifter is designed to provide the ultimate level of customization for your manual transmission. This unit allows drivers to independently adjust both the height of the shift knob and the length of the shift throw, enabling a tailored feel that ranges from a standard reach to a short, crisp racing throw. By reducing the throw distance, you can achieve faster, more precise gear changes without compromising shift quality.

Constructed with high-quality CNC machined materials, this shifter replaces the factory assembly to eliminate the vague feel and excessive play often found in stock units. The integrated reverse lockout ensures reliable operation and prevents accidental gear entry, while the black knob and red accents provide a premium aesthetic upgrade to your vehicle's interior.

• Adjustable shift throw for faster gear engagement and reduced movement
• Customizable knob height to suit your driving style and ergonomics
• CNC machined construction for precise tolerances and long-term durability
• Anodized red reverse lockout mechanism and weighted black shift knob included
• Designed to mount directly to factory location for a straightforward installation
• Manufacturer Part Number: 215X02P-W-RD-KNOB-BK-LOCKOUT

Fine-tune your gear changes with the COBB Tuning Adjustable Shifter. This high-performance upgrade allows for independent adjustment of both shift height and throw length, letting you customize the mechanical feel of your vehicle to match your driving style. Whether you prefer a stock-height shifter with a shorter throw or a low-profile setup for rapid-fire transitions, this assembly provides the versatility needed to dial in the perfect gate-to-gate experience.

Built from premium machined materials, this shifter eliminates the compliance found in factory assemblies for a more rigid, direct connection to the transmission. This specific kit comes equipped with a sleek black shift knob and a striking red anodized reverse lockout, providing a performance-oriented aesthetic for your interior while ensuring smooth, reliable operation of the reverse gear safety mechanism.

• Independent adjustment of shift throw and knob height
• High-strength construction for reduced flex and precise engagement
• Includes black shift knob and red anodized reverse lockout
• Retains full reverse lockout functionality
• Manufacturer Part Number: 215X02P-W-BK-KNOB-W-RD-LOCKOUT

The COBB Adjustable Shifter provides a significant upgrade over factory shift levers, allowing drivers to fine-tune both the height of the knob and the length of the shift throw. By replacing the OE unit, this shifter eliminates the vague, rubbery feel often associated with stock assemblies, delivering precise, mechanical engagement and shorter gear changes.

This comprehensive kit includes a black shift knob and a matching black reverse lockout, ensuring a cohesive look for your interior. The dual-adjustability allows you to position the knob exactly where it feels most natural for your driving style, whether you prefer a low-profile short throw or a taller, more accessible lever height.

• Adjustable shift throw for quicker, more precise gear changes
• Independently adjustable lever height for customized ergonomics
• Includes COBB Black Shift Knob and Black Reverse Lockout
• High-quality construction designed for crisp, consistent shifts
• Manufacturer Part Number: 215X02P-W-BK-KNOB-W-BK-LOCKOUT

The COBB Adjustable Shifter allows drivers to dial in the perfect shift feel by replacing the factory assembly with a high-performance, highly customizable unit. Designed to provide a more mechanical and precise connection to the transmission, this shifter eliminates the vague feel of the stock component while offering independent adjustment of both shift throw and knob height.

Constructed from CNC-machined 6061 aluminum and stainless steel, this shifter is built to handle aggressive driving without the flex associated with plastic OE housings. The independent adjustment points allow you to shorten the throw for quicker gear changes while positioning the shift knob at the optimal height for your arm length and driving style. This specific kit features a black shift knob paired with a striking red anodized reverse lockout for a custom interior aesthetic.

• Independently adjustable shift throw and knob height
• CNC-machined 6061 aluminum construction with stainless steel hardware
• Includes black shift knob and red anodized reverse lockout collar
• Improves tactile feedback and reduces gear-change interval
• Manufacturer Part Number: 215X02P-W-BK-KNOB-RD-LOCKOUT

The COBB Tuning Adjustable Shifter allows for precise customization of your vehicle's gear engagement and ergonomics. By providing independent adjustment for both shift throw and knob height, this assembly enables drivers to dial in a firmer, more mechanical feel while reducing the distance between gears for faster shifting.

• Customizable Ergonomics: Independently adjust shift knob height and throw length to suit your driving style.
• Premium Components: Includes a sleek black shift knob and a matching black reverse lockout for a unified interior aesthetic.
• Enhanced Precision: Engineered to eliminate the vague, rubbery feel of factory shifters by using tighter tolerances and high-quality materials.
• Direct Replacement: Designed to bolt into the factory location for a significant upgrade in tactile feedback.
• Manufacturer Part Number: 215X02P-W-BK-KNOB-BK-LOCKOUT

The COBB Tuning Adjustable Short Shifter gives drivers total control over their transmission's tactile feedback. This shifter is designed to replace the factory unit, offering independent adjustment of both shift height and throw length. By allowing you to customize the leverage and positioning of the gear lever, it reduces travel for faster gear changes and aligns the knob for better ergonomics.

Constructed from high-strength materials to ensure precise gear engagement without the flex found in plastic OE components, this assembly is built for long-term durability under spirited driving conditions. This specific kit (MPN 215X02P-TW-W-KNOB-W-RD-LOCKOUT) comes complete with a white shift knob and a red anodized reverse lockout collar for a custom interior finish.

• Independently adjustable shift height and throw length
• Reduces shift throw for faster, more precise gear changes
• Includes white shift knob and red reverse lockout collar
• High-quality construction for crisp engagement and durability
• Manufacturer Part Number: 215X02P-TW-W-KNOB-W-RD-LOCKOUT

The COBB Adjustable Shifter provides complete control over your gear engagement, allowing for a personalized driving experience. This high-precision component enables independent adjustment of both the shift throw and the shift knob height, letting you find the perfect balance between leverage and speed. By shortening the distance between gears, it eliminates the vague, rubbery feel of factory shifters for more mechanical and confident shifts.

• Independently adjustable throw length and knob height for custom ergonomics
• Precision-machined construction reduces flex and improves tactile feedback
• Includes shift knob and integrated black reverse lockout mechanism
• Engineered to replace the factory shifter assembly for a more direct connection to the transmission
• Manufacturer Part Number: 215X02P-TW-W-KNOB-W-BK-LOCKOUT

The COBB Adjustable Shifter provides the ultimate in manual transmission customization, allowing you to fine-tune your driving experience through adjustable throw and height settings. This shifter is engineered to replace the factory assembly, offering a more mechanical, precise feel for quicker gear transitions and improved driver feedback.

Constructed for durability and precision, this kit includes a weighted shift knob and a striking red reverse lockout. By altering the leverage and pivot points, drivers can achieve the exact tactile response required for both spirited driving and daily commuting.

• Independently adjustable shift throw and knob height
• Includes weighted shift knob for smoother gear engagement
• Integrated red reverse lockout for a custom aesthetic and reliable function
• Replaces the factory shifter to eliminate slop and improve precision
• Manufacturer Part Number: 215X02P-TW-W-KNOB-RD-LOCKOUT

The COBB Adjustable Short Shifter provides a significant upgrade in gear-change precision by allowing you to independently tune both shift height and throw length. This assembly replaces the factory shifter to eliminate the vague, rubbery feel of the stock unit, providing a firm, mechanical engagement for more consistent shifting.

• Independent adjustment of shift height and throw distance for a customized cockpit feel
• Includes a high-quality COBB shift knob in black finish
• Integrated reverse lockout mechanism ensures smooth and reliable operation
• Precision-machined components designed for high-stress use and long-term durability
• Direct-fit replacement for the original shifter assembly
• Manufacturer Part Number: 215X02P-TW-W-KNOB-BK-LOCKOUT

By adjusting the pivot point, you can reduce throw for faster gear transitions on the street or track. This kit comes complete with the black knob and lockout components required for a comprehensive installation.