Maintain critical crankshaft end play with the ACL Standard Size Thrust Washer, engineered for precise fitment in 2008 and newer Mitsubishi Lancer Evolution X (4B11T) and Hyundai Genesis models equipped with the 4B11T engine.

A thrust washer is a vital component in your engine's rotating assembly, specifically designed to control the crankshaft's axial movement within its journals. By limiting fore and aft motion, this washer prevents excessive wear on the crankshaft, block, and other bearing surfaces, ensuring long-term engine health and performance.

• Size: Standard Size, ideal for crankshafts that have not been machined and require factory specification end play.
• MPN: 1T1237-STD
• Vehicle Fitment: 2008+ Mitsubishi Lancer Evolution X (4B11T), 2008+ Hyundai Genesis (4B11T)

Choosing a standard size thrust washer ensures accurate factory tolerances are restored, providing reliable operation and protecting your engine's internals from damaging movement.

The ACL Standard Size Thrust Washer (MPN: 1T1219-STD) is engineered to precisely control crankshaft end play in Mitsubishi 4G63 and 4G64 7-bolt engines, specifically found in the EVO V through IX models. This critical engine component prevents excessive axial movement of the crankshaft, which is vital for maintaining proper clearances and preventing premature wear on main bearings and other rotating assembly components.

When rebuilding or maintaining a high-performance engine like the 4G63/4G64, replacing wear items such as thrust washers is crucial. This ACL thrust washer is manufactured to OE specifications for standard size applications, ensuring a precise fit and reliable performance under demanding conditions. Proper crankshaft end play is essential for long-term engine durability and consistent power delivery.

• Application: Mitsubishi 4G63/4G64 7-Bolt EVO V-IX engines
• Size: Standard
• Manufacturer Part Number: 1T1219-STD

Fits 2009-2024 Nissan GT-R models, including Base, Premium, Black Edition, Track Edition, Nismo, and T-spec variants.

This ACL high-performance main bearing set is designed for precision engine builds requiring standard sizing on Version 4 blocks. Engineered to withstand the high loads and increased RPMs common in modified GT-R applications, these bearings provide the durability and oil clearance consistency necessary for reliable crankshaft support. Whether you are performing a routine refresh or a complete performance rebuild, this kit ensures your VR-series bottom end remains stable under pressure.

• Part Type: Main Bearing Set
• Sizing: Standard (STD)
• Block Compatibility: Version 4 Block
• Application: High Performance / Race
• Manufacturer Part Number: 1M2505H-STD-4

Fits select 2009-2024 Nissan GT-R models (3.8L V6) across all trims including Nismo, Premium, and Track Edition.

Engineered for the extreme tolerances of high-output VR38DETT builds, this ACL High Performance Main Bearing Set provides the essential durability required for competition and high-performance street use. These bearings are specifically designed for the Version 2 Nissan GT-R engine block, featuring a tri-metal construction that offers superior load-carrying capacity and fatigue resistance compared to standard OE components.

• Manufacturer Part Number: 1M2505H-STD-2
• Application: Nissan GT-R (R35) Version 2 Engine Blocks
• Sizing: Standard (STD) Size
• Material: High-strength tri-metal for improved thermal conductivity and durability
• Context: Essential for engine overhauls or performance upgrades where bearing reliability is critical

Fits 2009-2024 Nissan GT-R models (all trims including Premium, Nismo, and Track Edition).

The ACL High Performance Main Bearing Set is engineered to meet the extreme demands of the Nissan VR38DETT engine. This standard-sized (STD) set is specifically designed for Version 1 blocks, providing the necessary fatigue strength and precise tolerances required for high-performance builds and heavy engine loads. These bearings ensure reliable crankshaft support and consistent oil film thickness, protecting critical rotating components during high-RPM operation.

• Manufacturer Part Number: 1M2505H-STD-1
• Bearing Type: Main Bearing Set
• Size: Standard (STD)
• Block Compatibility: Version 1
• Construction: High-strength performance materials for increased durability
• Application: 2009-2024 Nissan GT-R

Fits select 2008-2023 Audi A3, Q3, S3, TT, TTS and Volkswagen Arteon, Atlas, Beetle, CC, Eos, Golf, GTI, Jetta, Passat, and Tiguan models.

Engineered for high-stress environments, the ACL High Performance Rod Bearing Set (1B5562H-STD) provides the durability and fatigue resistance required for modified engines and spirited driving. These standard-size bearings are designed to handle higher loads and RPMs than typical OE replacements, making them a critical upgrade during an engine rebuild or performance overhaul.

• Manufacturer Part Number: 1B5562H-STD
• Bearing Size: Standard (STD)
• Application: Connecting Rods
• Construction: High-strength tri-metal design for improved load capacity
• Compatible with a wide range of Audi and Volkswagen TFSI/TSI engines

Fits select 2009-2024 Nissan GT-R models across all trims including Nismo, Premium, Black Edition, and Track Edition.

These ACL connecting rod bearings are engineered for the high-performance demands of the GT-R's engine, providing the precision and durability required for enthusiast or track use. This specific part (MPN: 1B2500H-STD-1) is supplied as a single pair of bearings. Please note that a complete engine rebuild for the VR38DETT requires a total of 6 pairs.

• Manufacturer Part Number: 1B2500H-STD-1
• Bearing Size: Standard (STD)
• Quantity: One (1) Pair (Must order 6 for a full set)
• Construction: High-performance materials designed for increased load capacity
• Fitment: Designed specifically for the Nissan GT-R engine architecture

Fits the 1995 Volkswagen EuroVan Camper and other select 1983-1995 VW/Audi 4-cylinder and 5-cylinder engines (1780-1983cc).

This ACL Engine Connecting Rod Bearing Set is precision-engineered to restore reliable operation to your engine's rotating assembly. Designed as a direct replacement for worn factory bearings, this set (MPN 1B1606H-STD) ensures proper oil clearance and critical crankshaft protection. These bearings are essential for any engine overhaul or bottom-end refresh, providing the durability required for consistent performance.

• Manufacturer Part Number: 1B1606H-STD
• Engine Compatibility: 4-cylinder and 5-cylinder (1780cc to 1983cc)
• Standard (STD) size for original equipment journal specifications
• High-strength construction for enhanced fatigue resistance and friction reduction
• Engineered to meet or exceed OE tolerances for a precise fit

Fits 2006-2010 BMW M5 and M6 (5.0L).

Engineered for the high-revving BMW S85B50 V10 engine, this ACL Race Series performance rod bearing set is designed to meet the demands of high-performance driving. This specific "HX" series set provides an additional 0.025mm (0.001") of oil clearance compared to standard bearings. This increased clearance is a preferred choice for builders looking to improve oil flow and lubrication under high loads, providing a critical safeguard for the S85 engine's bottom end.

• Manufacturer Part Number: 10B1580HX-STD
• Engine Fitment: BMW S85B50 5.0L V10
• Bearing Size: Standard Size
• Clearance Spec: .001in (.025mm) Extra Oil Clearance (Thinner)
• Quantity: Full set for one engine (10 journal pairs)

Fits 2006-2010 BMW M5 and M6 Base models equipped with the S85B50 5.0L V10 engine.

This ACL Performance Rod Bearing Set is a critical upgrade for the high-revving BMW S85 engine, designed to provide the durability and load-carrying capacity required for performance driving. Engineered to replace worn factory components, these bearings utilize a tri-metal construction to handle the high-RPM demands and thermal stresses unique to the V10 powertrain. Precision manufacturing ensures consistent oil clearance and reliable crankshaft protection.

• Standard (STD) size for original equipment specifications
• High-strength tri-metal design for superior fatigue resistance
• Hardened steel backs to maintain bearing crush and retention
• Optimized for the high-revving S85B50 V10 engine architecture
• Manufacturer Part Number: 10B1580H-STD

The DV8 Offroad WIRE HARNESS provides a professional-grade solution for installing auxiliary LED lighting. Engineered for reliability in off-road environments, this universal harness features heavily insulated, high-grade wiring to protect against abrasion and heat. It includes a built-in relay and fuse to isolate the lighting circuit and protect your vehicle’s factory electrical system from overloads.

While optimized for Jeep installations, the 11-foot lead and universal design make it suitable for a wide range of trucks and SUVs. The kit comes complete with an easy-to-mount switch for a clean, functional interior setup.

• Manufacturer Part Number: WIRE HARNESS
• Total Length: 11ft lead for flexible routing options
• Circuit Protection: Integrated relay and built-in fuse
• Construction: Heavily protected and insulated high-grade wiring
• Control: Includes a convenient, easy-to-mount toggle switch
• Compatibility: Designed for all DV8 LED lights and most universal LED pods or light bars

Fits 2022-2026 Toyota Tundra and Sequoia models across all trims including TRD Pro, Capstone, and 1794 Edition.

The DV8 Offroad Digital Device Dash Mount (DMT2-01) provides a rugged, stable platform for securing your phone, GPS, tablet, or other essential gear within easy reach. Engineered to follow the factory dash contours, this mount features a micro-texture black powder coat finish that matches the interior aesthetic while providing superior durability for off-road use.

Installation is straightforward but does require minor drilling to ensure a rock-solid foundation for your electronics. The plate includes a built-in cable slot, allowing you to maintain full access to the 12V power plug even when multiple devices are mounted. It is specifically designed for compatibility with RAM diamond base mounts and other standard accessory hardware.

• Fits 2022-2026 Toyota Tundra and 2022-2026 Toyota Sequoia.
• Integrated M5 PEM nuts for versatile accessory mounting.
• Includes slots for use with 1/4-inch carriage bolts.
• Durable micro-texture black powder coat finish.
• Compatible with RAM Mounts brand diamond base device holders.
• Integrated cable routing slot for 12V power access.
• Manufacturer Part Number: DMT2-01

Fits 2003-2005 Subaru WRX.

The Cobb Initialization Connector is a required component for any driver looking to reflash the ECU on early GD-chassis WRX models. This connector, also known as a "flash mode jumper," bridges the factory initialization circuit, which is necessary for the COBB Accessport to communicate with and write data to the vehicle's engine control unit.

Without this connector, the ECU remains in a read-only state, preventing the installation of new maps or firmware updates. It plugs directly into the factory diagnostic harness, typically located under the driver-side dashboard, providing a secure and reliable connection during the tuning process.

• Enables write access for ECU reflashing and map changes
• Essential for COBB Accessport installation and uninstall procedures
• Direct-fit connector for the factory initialization port
• Manufacturer Part Number: AE-WRX-FLASHMODE-03

Fits the 2002 Subaru WRX (2.0L).

The Cobb Tuning Flash Mode Initialization Connector is an essential tool for any owner of a 2002 Subaru WRX looking to reflash their ECU. On these specific early models, the factory ECU requires a physical bridge to enter its programming or "write" mode. This initialization connector plugs directly into the factory harness, completing the necessary circuit to allow the Cobb Accessport or other tuning interfaces to upload new maps and firmware.

• Required for ECU flashing and Accessport installation on 2002 models
• Enables the ECU "Write Mode" for stable data transmission
• Direct-fit plug connects to the factory harness under the dashboard
• Manufacturer Part Number: AE-WRX-FLASHMODE-02

Fits 2017-2020 Ford F-150 and F-150 Raptor models (3.5L / 2.7L).

The Cobb Redline Carbon Fiber Coolant Cover is a premium engine bay dress-up component designed to elevate the aesthetics of your EcoBoost-powered truck. By covering the utilitarian look of the factory plastic reservoir, this piece provides a high-end, motorsport-inspired finish that integrates seamlessly with the existing engine bay layout.

Constructed from high-quality carbon fiber, the cover is finished in a durable gloss clear coat. This finish protects the carbon material from the high-temperature environment of the engine bay while providing a deep, reflective shine. It is engineered for a precise fit directly over the OEM coolant reservoir, ensuring a clean and finished appearance that complements other Redline series upgrades.

• Premium carbon fiber construction
• High-gloss finish for enhanced durability and heat resistance
• Direct fitment over the factory coolant reservoir
• Designed to complement the Cobb Redline series aesthetic
• Manufacturer Part Number: 8F1700

Fits 2014-2019 Ford Fiesta ST.

The Cobb Rear Motor Mount (RMM) is an essential upgrade for any Fiesta ST owner looking to improve power delivery and drivetrain response. By replacing the soft, compliant factory mount, this performance component significantly reduces engine movement and "wheel hop" during hard acceleration and aggressive shifting. This ensures that more torque is transmitted directly to the pavement rather than being lost to engine pitch.

Constructed for longevity and precision, this mount provides a more connected feel between the driver and the vehicle without excessive noise, vibration, or harshness (NVH). It is a direct bolt-on replacement for the original equipment, utilizing factory mounting locations for a straightforward installation.

• CNC machined 6061-T6 billet aluminum construction
• Reduces engine lash and wheel hop for better traction
• Improves shifting feel and overall throttle response
• Designed as a direct replacement for the factory rear mount
• Manufacturer Part Number: 892010

Fits 2013-2018 Ford Focus ST.

The Cobb Air Oil Separator (MPN 891610) is a critical reliability upgrade designed to capture oil vapor and crankcase blow-by before it enters the intake tract. By preventing oil from coating the intake manifold and valves, this system significantly reduces the risk of carbon buildup and maintains consistent fuel octane levels to prevent detonation.

• Captures oil blow-by to keep the intake system and intercooler clean
• Reduces carbon deposits on intake valves for long-term engine health
• Maintains air-fuel mixture integrity and prevents octane dilution
• Designed specifically for the 2013-2018 Ford Focus ST chassis
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 891610

Fits 2007-2013 Mazdaspeed3 and 2013-2018 Ford Focus ST.

The Cobb Tuning Rear Motor Mount (RMM) is the most effective way to eliminate excessive engine movement and wheel hop on your Mazdaspeed3 or Focus ST. By replacing the soft, factory-rubber bushing with a high-durometer polyurethane unit housed in a CNC-machined billet aluminum body, this mount provides a crucial link between the powertrain and the chassis. The result is crisper shifting, more direct throttle response, and improved traction during hard launches, all while maintaining a balance between performance and cabin comfort.

• Reduces engine movement and eliminates wheel hop
• CNC-machined 6061-T6 billet aluminum construction
• High-quality 85A durometer polyurethane bushings
• Direct bolt-on replacement for the factory rear mount
• Zinc-plated hardware included
• Manufacturer Part Number: 891010

The Cobb Pitch Stop Mount (MPN 862001) is engineered to significantly reduce drivetrain slop and engine movement during aggressive shifting and heavy acceleration. By replacing the factory plastic unit and its soft rubber bushings, this upgrade provides a more direct connection between the engine and the chassis, resulting in a more connected driving experience.

Constructed from CNC-machined 6061 billet aluminum, this mount features custom-durometer polyurethane bushings that effectively control the fore/aft "pitching" motion of the engine without introducing excessive NVH (Noise, Vibration, and Harshness). It is a direct bolt-on replacement for the factory component, designed to install easily into the original mounting points.

• CNC-machined 6061-T6 billet aluminum construction for maximum rigidity
• Custom-molded polyurethane bushings for improved durability and response
• Reduces engine movement and stabilizes the drivetrain under load
• Direct replacement for the OE factory pitch stop
• Laser-etched Cobb logo and anodized finish
• Manufacturer Part Number: 862001

Fits 2022-2024 Subaru WRX models.

The Cobb Redline Carbon Fiber Fuse Cover provides a premium aesthetic upgrade for your engine bay, replacing the factory plastic with high-quality composite materials. This passenger-side cover is part of the Redline series, designed to give the VB chassis WRX a cohesive, motorsport-inspired look under the hood.

Each cover is constructed from a 2x2 twill weave carbon fiber pattern and finished with a high-gloss clear coat. This UV-resistant coating ensures the finish remains vibrant and resists yellowing or hazing despite the high-heat environment of the engine compartment. The piece is engineered for a precise fit over the OEM fuse box, offering a seamless installation that instantly elevates the vehicle's appearance.

• Construction: 2x2 Twill Weave Carbon Fiber
• Finish: High-Gloss UV-Resistant Clear Coat
• Location: Passenger Side
• Direct fit for 2022-2024 Subaru WRX
• Manufacturer Part Number: 846665-PASS

Fits 2022-2024 Subaru WRX models.

Elevate your engine bay aesthetics with the Cobb Redline Carbon Fiber Fuse Cover for the driver side. This premium component provides a high-end, performance-oriented appearance that integrates seamlessly with the factory engine bay layout. Constructed from authentic carbon fiber with a deep, glossy clear coat, it is designed to withstand engine bay temperatures while resisting UV yellowing over time.

The Redline series focuses on a refined finish and precise fitment, ensuring this cover sits flush and secures properly. Whether you are completing a full carbon fiber engine dress-up or just looking for a standout accent piece, this driver-side fuse cover offers a significant visual upgrade over the standard textured plastic OE part.

• Authentic carbon fiber construction with a high-gloss finish
• Specifically contoured for the driver-side fuse box on the VB chassis
• Complements other Cobb Redline engine bay components
• Designed for simple installation and a factory-level fit
• Manufacturer Part Number: 846665-DRIVER

Fits select 2008-2021 Subaru WRX and STI, including 2018 Type RA and 2019 S20 models.

The Cobb Redline Fuse Cover (MPN 844660) is a premium engine bay dress-up component designed to elevate the visual appeal of your Subaru’s engine compartment. Part of the Cobb Redline series, this cover features a high-quality gloss finish that provides a sleek, customized appearance while maintaining a factory-precise fit. It serves as a direct aesthetic upgrade, allowing enthusiasts to achieve a clean and coordinated look under the hood with a durable, high-end accent.

• Manufacturer Part Number: 844660
• Series: Cobb Redline
• Finish: High-gloss
• Compatibility: 2008-2021 Subaru WRX and STI (including Type RA and S20)
• Application: Engine bay dress-up for factory fuse box

Fits 2015-2020 Subaru WRX.

The Cobb Air Oil Separator (AOS) is an essential upgrade for maintaining the health and performance of your FA20DIT engine. By intercepting oil vapor and moisture from the crankcase ventilation system before it reaches the intake tract, this kit prevents carbon buildup on intake valves and reduces the risk of engine-damaging detonation caused by oil-diluted fuel. It is a proactive solution for keeping your intake manifold, intercooler, and turbocharger piping clean.

• Protects intake valves from carbon deposits and oil fouling
• Maintains consistent fuel octane levels by reducing blow-by
• Durable construction with high-quality fittings and hoses
• Designed for a precise fit within the engine bay
• Manufacturer Part Number: 843615

Fits 2008-2014 Subaru WRX and 2008-2020 Subaru STI models.

The Cobb Air Oil Separator (AOS) is a critical performance upgrade designed to maintain the health and efficiency of your EJ-series engine. By intercepting oil vapor from the crankcase ventilation system before it can enter the intake tract, this AOS prevents oil from coating your intercooler cores, intake valves, and combustion chambers. Removing this oil contamination helps maintain effective fuel octane levels and reduces the risk of oil-induced pre-ignition (knock), especially in high-boost applications.

• Prevents oil vapor from entering the intake system and coating the intercooler
• Reduces carbon buildup on intake valves for better long-term performance
• Helps maintain consistent air/fuel ratios and octane stability
• Specifically engineered for the 08-14 WRX and 08-20 STI vacuum systems
• Manufacturer Part Number: 822615

Fits 2008-2018 Subaru WRX and STI models. This Cobb Alternator Cover (815055) is a direct-fit upgrade designed to enhance the engine bay aesthetics of your EJ or FA-series Subaru while providing a durable shield for the alternator belt. It replaces the factory plastic unit with a more robust and visually striking component.

Constructed from lightweight, high-strength aluminum, this cover features a textured wrinkle black powder coat finish that resists heat and chemical exposure. The design utilizes factory mounting points for a secure, rattle-free installation that requires no permanent vehicle modifications. This is a simple, effective way to clean up the engine compartment and add a motorsport-inspired finish.

• Precision-bent aluminum construction for a perfect fit
• Durable wrinkle black powder coat finish matches other Cobb engine components
• Laser-etched Cobb logo for a premium look
• Installs in minutes using factory mounting hardware
• Manufacturer Part Number: 815055

Fits 2006-2007 Subaru WRX and 2004-2007 Subaru STI models.

The Cobb Air Oil Separator (AOS) is a critical upgrade for turbocharged EJ-series engines, designed to manage crankcase pressure and prevent oil vapor from entering the intake tract. In a factory setup, oil-laden air is recirculated into the intake, which can coat the intercooler, throttle body, and intake valves, eventually leading to carbon buildup and a reduction in effective fuel octane.

This system intercepts blow-by from the crankcase and cylinder heads, separating the liquid oil and returning it directly to the oil pan. By ensuring only clean air reaches the combustion chamber, the Cobb AOS helps maintain consistent performance, prevents detonation (knock), and keeps your forced induction system running efficiently.

• Prevents oil vapor buildup in the intercooler and intake manifold
• Reduces the risk of engine knock by maintaining fuel octane purity
• Returns separated oil to the crankcase to maintain lubrication levels
• Includes all necessary application-specific hoses, fittings, and mounting hardware
• Manufacturer Part Number: 811615

Fits 2002+ Subaru WRX and 2004+ STI and Forester XT models.

Upgrade your engine bay with the Cobb Delrin Oil Cap. This component serves as a direct replacement for the factory plastic oil filler cap, providing a clean aesthetic and improved tactile feel. Machined from high-strength Delrin thermoplastic, this cap offers superior thermal resistance compared to traditional aluminum alternatives, staying cooler to the touch even after spirited driving or track sessions. Its robust construction ensures long-term durability and resistance to engine chemicals and heat cycles.

• Machined from high-quality Delrin thermoplastic
• Direct replacement for the factory oil filler cap
• Low thermal conductivity for easier handling when the engine is hot
• Manufacturer Part Number: 800515

Fits Volkswagen GTI (MK7/MK7.5/MK8), Golf R, and Audi A3 and S3 (8V) models.

Elevate the aesthetic of your engine bay with the Cobb Redline Carbon Fiber Engine Cover. This premium component replaces the underwhelming factory plastic shroud with a high-performance material that reflects the caliber of your vehicle's engineering. Designed as a direct-fit upgrade for the EA888 engine platform, it provides a clean, motorsport-inspired look while utilizing factory mounting locations for a secure installation.

• Manufactured from high-quality carbon fiber with a classic 2x2 twill weave
• Finished with a high-gloss clear coat for enhanced UV protection and heat resistance
• Features the signature Redline series styling accents
• Simple installation that requires no permanent vehicle modifications
• Manufacturer Part Number: 4V2600

Fits 2022-2024 Subaru WRX models.

Elevate the visual appeal of your engine bay with the Cobb Redline Carbon Fiber Engine Cover. This premium aesthetic upgrade replaces the understated factory plastic components with high-quality 2x2 weave carbon fiber, providing a motorsport-inspired look that complements the VB chassis. Engineered for a precise fit, the cover utilizes factory mounting points to ensure a secure installation without the need for permanent modifications.

• Constructed from genuine 2x2 weave carbon fiber for strength and weight savings
• High-gloss clear coat finish provides UV protection and resists engine bay heat
• Direct bolt-on fitment using existing factory mounting locations
• Features the Cobb Redline series styling for a cohesive engine bay appearance
• Manufacturer Part Number: 446610

Fits 2022-2024 Subaru WRX models.

Enhance the visual appeal and durability of your VB chassis engine bay with the Cobb Aluminum Alternator Cover. This component replaces the lackluster factory plastic shroud with a precision-engineered aluminum piece, offering a more rugged and high-performance aesthetic while protecting the alternator and belt assembly.

• Direct replacement for the factory plastic cover on 2022-2024 Subaru WRX
• Lightweight and durable aluminum construction for superior heat resistance
• Utilizes factory mounting points for a straightforward installation process
• Precisely contoured to clear the intake manifold and engine components
• Manufacturer Part Number: 446600