FAST LSX/LSXR/LSXRT Fuel Rails feature a larger internal diameter that dampens the pulses and provides increased fuel volume, ensuring that your injectors never run dry. In addition, they yield better fuel distribution and ultimately greater horsepower. Featuring high strength billet, lightweight, red or black (specific applications) anodized aluminum construction (does not include Part 146020-KIT or Part 146021-KIT), FAST fuel rails deliver performance in addition to a show car quality appearance.

FAST LSX/LSXR/LSXRT Fuel Rails feature a larger internal diameter that dampens the pulses and provides increased fuel volume, ensuring that your injectors never run dry. In addition, they yield better fuel distribution and ultimately greater horsepower. Featuring high strength billet, lightweight, red or black (specific applications) anodized aluminum construction (does not include Part 146020-KIT or Part 146021-KIT), FAST fuel rails deliver performance in addition to a show car quality appearance.

This fuel injector spacer kit for LS3/L99 and L76 engines is designed to allow the use of OE fuel rails with our 146102B, 146103B and 146104B 102mm intake manifolds.

The Edelbrock #3647 Fuel Rail is designed to fit the #7179 GEN III HEMI Victor II Intake Manifold. This kit utilizes our standard, ribbed extrusion fuel rails and they are black anodized with machine highlighted logo. They feature -6 AN ends. Kit come complete with 2 rails, mounting hardware and hose kit

• Threaded On Both Ends

All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3639 fuel rail kit is for use with 4.6L Ford Victor Jr. Manifold #28385 and standard injectors. Rails will have a Clear Anodized Finish and 3/8" NPT inlet/outlets.

• Threaded On Both Ends

The AVS2 Series Carburetor Calibration Kit #1948 is for tuners looking to custom-tune the performance of their #1905 or #1906 carburetor. This kit contains all of the necessary metering rods and jets that will allow you to adjust your AVS2 carburetor either richer or leaner for both cruising and power modes. This kit also includes an assortment of five pairs of jets, seven pairs of metering rods, five step-up springs, metering rod retaining springs, six replacement hairpin springs and a calibration chart that tells which rod/jet combination to use, all organized in a handy reusable storage case.

The Edelbrock AVS2 Series #1905 is a satin-finished carburetor with manual choke that is designed and calibrated for optimum street performance in engines that require 650 CFM of air-fuel flow. The AVS2 is a perfect four-barrel replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle. Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds. The Edelbrock AVS2 #1905 includes both timed and full vacuum ports for ignition advance. It comes with: .101 primary and.098 secondary metering jets, .070 x .037 metering rods - orange, (5" Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2, order part #19053.

• The Edelbrock AVS2 Series #1905 is a satin-finished carburetor with manual choke that is designed and calibrated for optimum street performance in engines that require 650 CFM of air-fuel flow.
• The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle.
• The AVS2 is a perfect four-barrel replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance.
• The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds.
• Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit.
• For Single Or Dual Plane Intake Manifolds

This Part Fits:

The Edelbrock #1902 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1902 is calibrated for single-quad applications and factory equipped with: Metering Jets - Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5' Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.

• Includes Both Timed and Full Vacuum Ports For Ignition Advance

This Part Fits:

The Edelbrock #1901 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1901 is calibrated for single-quad applications and factory equipped with: Metering Jets - Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5' Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.

• Includes Both Timed and Full Vacuum Ports For Ignition Advance

This Part Fits:

Edelbrock Part #1725 Performer RPM Series fuel pump is for 289-351W Ford designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance's street Fuel Pumps feature a high quality three stage polished finish. The unique valve design improves flow quantity and quality, and will support engines up to 600 hp. High-volume, 3/8" NPT inlet and outlet surpasses the capacity of conventional models. Produces 6 psi and does not require a regulator. Use with gasoline only. Clockable lower housing can be rotated in 60 Deg Increments for best inlet/outlet alignment.

• Gasoline Or Mixed Fuels Only

This Part Fits:

Edelbrock part #1721 Performer RPM Series fuel pump is for Small-Block and "W Series" Chevrolet designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance's street Fuel Pumps feature a high quality three stage polished finish. The unique valve design improves flow quantity and quality, and will support engines up to 600 hp. High-volume, 3/8" NPT inlet and outlet surpasses the capacity of conventional models. Produces 6 psi and does not require a regulator. Use with gasoline only. Clockable lower housing can be rotated in 60 Deg Increments for best inlet/outlet alignment.

• Gasoline Or Mixed Fuels Only

This Part Fits:

The Edelbrock Throttle Lever Adapter #1483 fits 1968 and later Ford automatic transmission equipped vehicles with cable operated throttle (except A.O.D.). Accepts cruise control. Use with appropriate throttle cable plate when necessary. Has a gold iridited finish to match Edelbrock AVS2, Performer Series Carbs.

• Use with Appropriate Throttle Cable Plate

This Part Fits:

The Edelbrock Performer Series (EPS) Linkage Kit (Includes 1 ea. of 7 Links and 6 Retaining Clips)

• Incl. 1 ea. Of 7 Links And 6 Retaining clips

The Edelbrock 1409 Marine Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the harsh abuse only a marine environment can inflict. Several characteristics make the 1409 Marine Series 600 CFM electric choke carburetor an outstanding marine performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that is iridited and assembled with PTFE-coated shafts and pump arm for maximum protection. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for trouble-free operation.

• Installation And Tuning DVD Included With Every New Carb

The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

• Made In The U.S.A.

This Part Fits: