Fits select 1967-1972 Chevrolet Blazer, K10, K20 and GMC Jimmy, K15/K1500, K25/K2500 Pickup and Suburban models.

Skyjacker Softride leaf springs (MPN: C280S) are engineered to improve suspension articulation and ride quality without sacrificing the durability required for heavy-duty use. These progressive multileaf packs are manufactured from high-grade American steel and designed to meet or exceed factory load capacities. To ensure longevity under high-stress conditions, each leaf is shot-peened with high-velocity steel pellets to compress the surface, significantly increasing tensile strength and resistance to fatigue.

Technical performance is further enhanced by tapering the leaves over their entire length, which allows for greater flex at the leaf ends and more even load distribution. To eliminate the binding and friction common with traditional "C" style bend clips, Skyjacker utilizes bolt-style spring clips. This design allows the leaves to move more freely, providing the maximum wheel travel necessary for off-road performance while maintaining a smooth street ride.

• Manufactured from American steel for superior durability
• Shot-peened leaves for increased tensile strength and fatigue life
• Tapered leaf design ensures even load distribution and maximum flex
• Bolt-style spring clips eliminate friction and binding
• Progressive rate multileaf pack construction
• Load capacity equal to or greater than original equipment
• Limited Lifetime Warranty
• Manufacturer Part Number: C280S

Fits select 1967-1972 Chevrolet Blazer, K10/K20 Pickup and Suburban, and GMC Jimmy, K15/K1500/K25/K2500 Pickup and Suburban.

Upgrade your vehicle's suspension with the Skyjacker Softride Series Leaf Spring (C260S). Designed to improve ride quality without sacrificing durability, these springs are engineered using shot-peened American steel. The shot-peening process compresses the steel surface, significantly increasing tensile strength and allowing for maximum wheel travel. Unlike traditional designs that use restrictive "C-style" bend clips, Skyjacker utilizes bolt-style spring clips to eliminate friction and prevent binding during suspension cycles.

These progressive multileaf packs feature leaves that are tapered over their entire length. This design ensures more flex at the leaf ends and distributes loads more evenly across the pack, preventing individual leaves from digging into one another. The result is a smooth, predictable ride that maintains a load capacity equal to or greater than original equipment.

• Manufacturer Part Number: C260S
• Series: Softride®
• Material: Shot-peened American Steel
• Construction: Progressive Multileaf Pack with tapered leaf ends
• Clips: Bolt-style spring clips to reduce friction and binding
• Capacity: Equal to or greater than OE load rating
• Warranty: Limited Lifetime Warranty

Fits select 1968-1972 Chevrolet and GMC K10, K15, K20, and K25 Pickup and Suburban models equipped with 56-inch rear springs.

This Skyjacker 6-inch suspension lift kit provides the necessary clearance for larger tires and a more aggressive stance without sacrificing ride quality. Engineered to respond to both on-road and off-road conditions, this system replaces worn factory components with precision-engineered springs and hardware designed to maintain handling characteristics while increasing vehicle height.

All major components are finished in a durable black powder coating to resist corrosion and endure harsh environments. The kit includes all necessary mounting hardware and comprehensive instructions to facilitate a straightforward installation process on 4WD applications.

• Provides 6 inches of suspension lift
• Specifically designed for models with 56-inch rear leaf springs
• Powder-coated black finish for superior corrosion resistance
• Includes all necessary mounting hardware and instructions
• Limited Lifetime Warranty
• Manufacturer Part Number: C260AKSD

Fits select 1967-1972 Chevrolet K10, K20, Blazer and GMC K15, K25, Jimmy 4WD models. This Skyjacker Softride leaf spring is engineered to provide a smooth ride without sacrificing the durability required for K-series trucks.

Constructed from high-quality American steel, these progressive multi-leaf packs undergo a rigorous shot-peening process. By hitting the steel with hard steel pellets at high velocities, the surface is compressed to significantly increase tensile strength. This ensures maximum wheel travel and improved ride quality while extending the service life of the spring. Unlike standard springs that use friction-inducing bend clips, Skyjacker utilizes bolt-style spring clips to eliminate binding. The individual leaves are tapered along their entire length to create more flex at the ends, distributing loads evenly and preventing leaves from digging into one another.

• Part Number: C240S
• Construction: Progressive multi-leaf pack using American steel
• Finish: Shot-peened for increased tensile strength and durability
• Hardware: Bolt-style spring clips to reduce friction and binding
• Design: Fully tapered leaves for even load distribution and maximum flex
• Capacity: Load capacity meets or exceeds OE specifications
• Warranty: Limited Lifetime Warranty

Fits select 1967-1973 Chevrolet and GMC K-series trucks, including K10, K20, K15/K1500, K25/K2500, Blazer, Jimmy, and Suburban models.

Skyjacker Softride leaf springs are engineered to provide a significant upgrade in ride quality and suspension articulation while maintaining the rugged performance required for classic 4WD applications. Constructed from high-quality American steel, these progressive multileaf packs feature a tapered design across the entire length of the leaf. This tapering allows for increased flex at the leaf ends and more even load distribution, preventing the "digging" effect common in non-tapered spring packs.

To maximize durability and fatigue resistance, every leaf undergoes a shot-peening process where steel pellets are fired at high velocities to compress the steel surface, increasing its tensile strength. This allows for greater wheel travel without compromising the lifespan of the spring. Additionally, Skyjacker utilizes bolt-style spring clips rather than restrictive C-style bend clips to eliminate binding and friction during compression and rebound.

• MPN: C225S
• Material: American-made steel construction
• Design: Tapered, progressive multileaf pack
• Process: Shot-peened surface for increased tensile strength and durability
• Hardware: Friction-reducing bolt-style spring clips
• Capacity: Load capacity equal to or greater than OE specifications
• Warranty: Limited Lifetime Warranty

Fits select 1973-1991 Chevrolet and GMC K-Series, V-Series, Blazer, and Jimmy (K10/K20/K30 and V10/V20/V30) 4WD models.

The Skyjacker Softride C180S leaf spring is engineered to provide superior ride quality and increased wheel travel without compromising durability. Unlike standard springs that use harsh "C" style bend clips which cause friction and binding, these Softride springs utilize bolt-style spring clips to allow for smoother movement and consistent performance. Each leaf is constructed from American steel and undergoes a high-velocity shot-peening process with steel pellets. This technique compresses the steel's surface, significantly increasing tensile strength and extending the service life of the spring.

To ensure optimal flex, Skyjacker tapers the leaves across their entire length, allowing for more movement at the leaf ends. This design more effectively distributes the load over a larger area, preventing individual leaves from digging into those above them. These progressive multi-leaf packs are designed to meet or exceed original equipment load capacities while providing a more compliant ride.

• Manufacturer Part Number: C180S
• Constructed from high-tensile American steel
• Shot-peened surface for maximum durability and fatigue resistance
• Tapered leaf design for improved flex and load distribution
• Bolt-style spring clips to eliminate binding and friction
• Progressive rate multileaf pack
• Load capacity equal to or greater than OE
• Limited Lifetime Warranty

Fits select 1973-1991 Chevrolet and GMC K-Series trucks and SUVs, including Blazer, Jimmy, Suburban, K10, K20, K30, and V-Series models.

Skyjacker Softride leaf springs are engineered to provide a significant upgrade in ride quality without compromising load capacity. Using high-grade American steel, each individual leaf is shot-peened with hard steel pellets at high velocities. This process compresses the steel surface, increasing tensile strength and allowing for maximum wheel travel and longevity. Unlike inferior designs that use friction-heavy "C" style bend clips, these springs utilize bolt-style spring clips to eliminate binding.

The progressive multileaf pack features a taper across the entire length of the leaf, creating more flex at the ends. This design ensures loads are distributed evenly, preventing leaves from digging into one another and providing a smoother, more controlled suspension cycle.

• Manufacturer Part Number: C160S
• Construction: Progressive multileaf pack
• Material: Shot-peened American steel
• Hardware: Bolt-style spring clips to reduce friction and binding
• Performance: Tapered leaf ends for increased flex and even load distribution
• Durability: Load capacity remains equal to or greater than OE specifications

Fits select 1973-1987 Chevrolet K10/V10 Suburban and GMC K15/K1500/V1500 Suburban 1/2-ton models.

Elevate your truck's stance and off-road capability with the Skyjacker Softride 6-inch lift kit. This suspension system is engineered specifically for 1/2-ton Suburban platforms to provide substantial ground clearance for larger tire fitment while preserving a smooth, predictable ride. Utilizing Softride technology, these springs are designed to react to terrain changes, providing a significant improvement in handling and comfort over worn factory components.

Every kit includes high-strength components finished in a durable black powder coat to resist corrosion in harsh environments. This package features 56-inch rear leaf springs and includes the necessary mounting hardware to ensure correct suspension geometry. Note that additional components may be required for a complete installation depending on your vehicle's specific setup.

• Part Type: Suspension Lift Kit
• Lift Height: 6 Inches
• Rear Spring Length: 56 Inches
• Series: Softride (SR)
• Finish: Black Powder Coated
• Manufacturer Part Number: C160AKSD
• Warranty: Limited Lifetime Warranty

Fits select 1973-1991 Chevrolet Blazer, K10, K20, K30, V10, V20, V30 and GMC Jimmy, K1500, K2500, K3500, V1500, V2500, V3500 (V-Series/K-Series 4WD models).

Skyjacker Softride C140S leaf springs are engineered to provide superior ride quality and suspension articulation without compromising durability. Manufactured from high-grade American steel, every leaf is shot-peened with steel pellets at high velocity to compress the surface of the metal. This process significantly increases the tensile strength, allowing for greater wheel travel and a longer service life compared to untreated springs.

To ensure smooth operation, these springs utilize bolt-style spring clips that eliminate the binding and friction common with traditional bend-style clips. The leafs are tapered over their entire length to distribute loads evenly and provide more flex at the ends, preventing individual leafs from digging into the pack during compression.

• Manufacturer Part Number: C140S
• Material: Shot-peened American steel
• Configuration: Progressive multileaf pack
• Hardware: Bolt-style spring clips for reduced friction
• Performance: Tapered leaf ends for maximum articulation
• Warranty: Limited Lifetime Warranty

Fits select 1973-1991 Chevrolet Blazer, K10, K20, K30, Suburban, and GMC Jimmy, K1500, K2500, and K3500 4WD models. This Skyjacker Softride leaf spring is engineered to provide a significant improvement in ride quality without sacrificing the heavy-duty load capacity required for classic GM trucks and SUVs.

Constructed from high-grade American steel, each leaf in the C125S pack undergoes a specialized shot-peening process. By bombarding the steel with hard steel pellets at high velocities, the surface is compressed to increase tensile strength and durability. The progressive multi-leaf design features tapered leaves that distribute weight evenly across the entire length of the spring, increasing flex at the leaf ends and preventing the "digging" common in lesser designs. To eliminate friction and binding, Skyjacker utilizes bolt-style spring clips rather than restrictive clinch-style clips.

• Manufacturer Part Number: C125S
• Series: Softride
• Construction: Progressive multi-leaf pack
• Material: American-made steel
• Shot-Peened: Yes, for increased tensile strength
• Clips: Bolt-style spring clips to reduce friction
• Load Capacity: Meets or exceeds original equipment ratings
• Note: U-bolts are not included and must be purchased separately
• Warranty: Limited Lifetime Warranty

Fits select 1967-1991 Chevrolet and GMC K10, K20, K30, V10, V20, V30, Blazer, Jimmy, and Suburban.

This Skyjacker leaf spring bumper is engineered to prevent over-compression and mechanical damage to your vehicle's leaf spring packs. By providing a durable contact point, these bump stops protect the material integrity of the springs and help maintain consistent suspension performance. They are an essential upgrade or replacement for worn factory units, particularly on vehicles subjected to heavy loads or off-road use.

• Precision-machined from high-grade aluminum for superior strength and corrosion resistance
• Protects leaf springs from excessive flex and potential breakage
• Replaces original equipment bumpers to restore suspension travel limits
• Manufacturer Part Number: BP45
• Limited Lifetime Warranty

Fits select 1980-1998 Ford F-100, F-150, F-250, F-250 HD, and F-350 trucks.

Skyjacker tie bolts (also known as center pins) are essential components for any suspension service involving leaf spring packs. These bolts serve as the primary alignment point, ensuring each leaf remains correctly indexed within the pack and preventing the axle from shifting. Whether you are reassembling a factory leaf pack or installing an add-a-leaf kit, these bolts provide the necessary clamping force to keep your rear suspension secure under load.

• Replaces worn, rusted, or sheared factory leaf spring center bolts
• Critical for maintaining proper axle alignment and leaf pack integrity
• Manufactured from durable materials to withstand high shear forces
• Sold individually (Single)
• Manufacturer Part Number: 7166
• Limited Lifetime Warranty

Fits select 1980-2003 Ford F-100, F-150, F-250, F-350, F-250 HD, Bronco II, and Ranger models.

Skyjacker Tie Bolts, also known as center pins, are essential components for maintaining the structural integrity and alignment of your leaf spring pack. Designed to secure individual leaf springs together and ensure the axle remains properly indexed, these bolts are manufactured from durable materials to withstand high shear and tension loads. This specific bolt replaces worn or sheared factory hardware to prevent dangerous spring shifting or axle misalignment during operation. Whether you are performing a stock repair or a custom spring pack modification, these bolts provide the reliable fastening required for truck and SUV suspension systems.

• Essential for securing leaf spring packs and ensuring proper axle indexing
• Constructed to withstand high shear forces in heavy-duty and off-road applications
• Replacement for worn, rusted, or broken factory center pins
• Manufacturer Part Number: 7164
• Backed by a Limited Lifetime Warranty

The Skyjacker 3810 Leaf Spring Tie Bolt is a critical hardware component designed to maintain the structural integrity of your vehicle's leaf spring pack. This high-strength fastener performs the dual role of securing individual leaf layers together into a cohesive unit while acting as the centering pin to ensure the axle housing is correctly aligned on the spring perch.

Ideal for use when rebuilding a leaf pack, installing an add-a-leaf kit, or replacing sheared factory hardware, this tie bolt is engineered to withstand the shear forces and tension common in heavy-duty suspension systems.

• Function: Aligns leaf packs and provides precise axle-to-spring centering
• Application: Suitable for multi-leaf spring assemblies
• Manufacturer Part Number: 3810
• Warranty: Limited Lifetime Warranty

Fits select 1965-2003 Ford Explorer, Explorer Sport, F-100, F-150, F-250, and F-350 models.

Skyjacker Tie Bolts are essential hardware designed to securely fasten your vehicle's leaf spring pack together. Whether you are replacing a broken center pin or rebuilding a leaf spring stack, these bolts ensure the individual leaves stay properly aligned and seated within the spring perch.

• Durable Construction: Manufactured from high-quality materials to handle the shear forces and tension required for heavy-duty suspension applications.
• Critical Alignment: Functions as the center pin to maintain correct axle-to-spring positioning.
• Manufacturer Part Number: 3806
• Warranty: Limited Lifetime Warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler.

Replace your weak factory components with the RockJock Heavy Duty Front Leaf Spring Shackle kit. Designed to eliminate the flex associated with stock stamped-steel shackles, these units provide a more stable platform for your Jeep's front suspension. These shackles measure 4-1/4 inches from bolt center to bolt center, providing approximately 3/4 inches of lift over the stock height.

Each shackle is constructed from laser-cut 1/4-inch thick steel side plates for maximum rigidity. The kit includes Energy Suspension fluted urethane bushings designed to retain grease, paired with Grade 8 greasable bolts featuring integrated zerk fittings for easy maintenance. A center bolt-in sleeve is included to further prevent side-plate deflection under load. The entire assembly is finished in a corrosion-resistant gold zinc plating for long-term durability in harsh off-road environments.

• Part Number: CE-9035A
• Quantity: Pair (Front)
• Material: 1/4-inch laser-cut steel
• Finish: Gold zinc plating
• Shackle Length: 4.25 inches (bolt center to center)
• Hardware: Grade 8 greasable bolts with zerk fittings
• Bushings: Fluted Energy Suspension urethane bushings
• Includes center bolt-in sleeves for added rigidity

Fits select 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Replace weak factory components with RockJock heavy-duty rear leaf spring shackles, designed to handle the stresses of off-road articulation and increased vehicle weight. These shackles are constructed from 1/4-inch thick laser-cut steel side plates for maximum rigidity, finished in a corrosion-resistant gold zinc plating. Measuring 4 1/4 inches from bolt center to bolt center, they provide approximately 3/4-inch of lift over the stock ride height. The inclusion of center bolt-in sleeves further prevents shackle kick-over and side-to-side deflection.

This kit includes premium Energy Suspension urethane bushings that are fluted on the inside to retain grease, paired with Grade 8 greasable bolts featuring integrated Zerk fittings for easy maintenance and quiet, bind-free operation. Sold as a pair for the rear of the vehicle.

• Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models
• 1/4-inch thick laser-cut steel side plates
• Energy Suspension fluted urethane bushings for grease retention
• Grade 8 greasable bolts with Zerk fittings included
• 4 1/4-inch center-to-center length (~3/4-inch lift over stock)
• Corrosion-resistant gold zinc plating
• Includes center bolt-in sleeves for added rigidity
• Manufacturer Part Number: CE-9034

Fits select 1984-2001 Jeep Cherokee XJ models.

This Omix heavy-duty rear leaf spring is engineered to restore the original ride height and suspension performance of your Cherokee. Designed as a direct-fit replacement for worn or sagging factory springs, this HD version features a 4-leaf construction and a 545 lb. load rating to maintain vehicle stability and handling. It is manufactured to match factory geometry for a precise installation into the original mounting locations.

• Heavy-duty 4-leaf spring design
• Load Rating: 545 lbs.
• Width: 2.375 inches
• Length: 50 inches (center-to-center) / 53.125 inches (overall)
• Replaces OE Part Number: 52000545
• Manufacturer Part Number: 18280.17

Note: Sold individually; two springs are required per vehicle. For a complete installation, it is recommended to use pivot eye bushing 18280.07 and shackle end bushing 18280.08.

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

This Omix front frame shackle hanging bracket is an OE-style replacement designed to restore the integrity of your Jeep's front suspension. Over time, factory brackets can suffer from fatigue or corrosion; this direct-fit metal component ensures your leaf spring shackles are securely mounted to the frame rail. Precisely engineered to match original equipment specifications, it maintains correct suspension geometry for both on-road handling and off-road durability.

• Direct fit for front frame location
• Fits either left (driver) or right (passenger) side
• High-strength metal construction with OE-style finish
• Replaces original equipment part number: 5355689
• Sold individually (2 required per vehicle)
• Manufacturer Part Number: 18271.04
• Limited 5-year manufacturer warranty

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Restore your vehicle's suspension geometry and eliminate the rattles associated with worn suspension hardware with the Omix Rear Leaf Spring Shackle Kit. Over time, OE shackles are prone to corrosion and bushing dry-rot, which compromises handling and ride quality. This kit is engineered to factory standards to provide a direct-fit replacement that restores the connection between your leaf springs and the chassis.

• Durable Construction: Manufactured from high-strength steel with a black finish for long-term durability.
• Complete Kit: Includes the shackle assembly and necessary rubber bushings for a comprehensive refresh.
• Compatibility: Specifically designed for the rear leaf spring position on CJ-series Jeeps.
• OE Replacement: Engineered to replace factory part number 5357497.
• Specifications: Sold individually (two required per vehicle); for the front shackle kit, see part number 18271.01.
• Manufacturer Part Number: 18271.02
• Warranty: Limited 5-year manufacturer warranty.

Fits 1976-1986 Jeep CJ5, CJ7, and CJ8 Scrambler models.

Restore the handling and ride quality of your classic Jeep with this Omix front leaf spring shackle kit. Designed as a direct OE-style replacement, this kit addresses the common issue of worn shackle bushings and hardware that leads to sloppy steering and suspension noise. This kit features a 3-inch center-to-center measurement and includes all the necessary components to service a single front leaf spring assembly.

• Replacement for OE part number: 5357620K
• Shackle dimension: 3-inch center-to-center
• Includes one shackle, four bushings, and necessary mounting hardware
• Enough components to complete one front spring
• Manufacturer Part Number: 18271.01
• Backed by a limited 5-year warranty

Fits 1941-1953 Willys MB and Jeep CJ-2, CJ-3. This Omix replacement rear leaf spring restores original ride height and suspension geometry for vintage military and civilian Jeep models. Precision-engineered to original equipment standards, this 9-leaf spring replaces worn or sagging factory units to ensure proper axle support and load handling.

• Design: 9-leaf stack for durability and correct spring rate
• Measurement: 40.25 inches center-to-center distance
• Installation: Direct fit; compatible with left or right side positions
• Fitment Note: Sold individually; two (2) units required per vehicle
• OE Cross-Reference: Replaces original part number A-614
• Warranty: Backed by a Limited 5-Year Warranty

For a complete installation, it is recommended to replace accompanying hardware. This spring is compatible with pivot eye bushing 18270.17 and requires shackle 18270.12 (LH thread) and 18270.13 (RH thread).

This Omix replacement front leaf spring is engineered to restore factory ride height and suspension geometry on 1987-1995 Jeep Wrangler YJ models. Built to meet OE specifications, this 4-leaf spring provides a direct-fit solution for worn, sagging, or cracked factory springs, ensuring your Jeep maintains proper axle alignment and handling characteristics on and off the trail.

Each spring is sold individually and features a non-directional design that fits either the front driver or front passenger side. For a complete front-end overhaul and level stance, two units are required per vehicle. This OE-style spring serves as a reliable replacement for restoring the original ride quality Jeep enthusiasts expect from Omix components.

• Fits 1987-1995 Jeep Wrangler (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport)
• Configuration: 4-leaf design for OE-equivalent load capacity
• Position: Front (Left or Right side)
• Replacement Part Number: OE 52003448
• Manufacturer Part Number: 18201.20
• Installation Note: Requires pivot eye bushing 18271.19 and shackle kit 18271.22 (sold separately)
• Warranty: Limited 5-Year Warranty