sPOD BantamX Touchscreen vehicle-specific kit for Toyota Tundra (’22-on) has been designed specifically to integrate the sPOD Touchscreen panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.

• Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily

sPOD BantamX HD vehicle-specific kit for Ford F150 (’21-on) and Ford F-150 Raptor (’'21-on) has been designed specifically to integrate the sPOD HD panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.

• Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily

This Part Fits:

Eliminate your vehicles's sluggish throttle response with a SpeedForm Throttle Response Controller. All modern vehicles use a drive-by-wire system that controls the throttle body electronically, similar to a dimmer switch. While innovative, this design causes an irritating delay that is most noticeable when trying to speed up to merge with fast moving traffic or when passing a slower moving car. The SpeedForm Throttle Response Controller actually boost this signal to eliminate the delay for quicker, snappier throttle response, making it a must have for all drive-by-wire vehicles. The SpeedForm Throttle Response Controller comes with (5) preset control modes for Stock, Eco, Comfort/Sport, Sport and Race applications. Each mode can further be adjusted with nine levels of sensitivity. This allows you to select the mode that works the best for your own personal driving style and needs. Stock - Acceleration is set to factory defaults. Display is NO. ECO - Designed for fuel economy. Display is EC. Comfort/Sport - Balances performance and fuel economy. Display is P1. Sport - Improves engine response for better performance during daily commuting. Display is P2. Race - Maximum performance with immediate throttle response. Display is P3. The SpeedForm Throttle Response Controller connects directly into the stock throttle position sensor found on the drive-by-wire gas pedal using an OEM style plug and play connector with no permanent modifications required. The Throttle Response Controller is 100% reversible and will not leave residual codes on the factory PCM making it warranty friendly.

• Stock, Eco, Sport/Comfort, Sport, and Race Modes
• Nine Positions of Sensitivity Adjustment
• Eliminates Drive-By-Wire Pedal Delay
• Easy Plug-and-Play Installation
• Enhances Vehicle Acceleration

This Part Fits:

Eliminate your vehicles's sluggish throttle response with a SpeedForm Throttle Response Controller. All modern vehicles use a drive-by-wire system that controls the throttle body electronically, similar to a dimmer switch. While innovative, this design causes an irritating delay that is most noticeable when trying to speed up to merge with fast moving traffic or when passing a slower moving car. The SpeedForm Throttle Response Controller actually boost this signal to eliminate the delay for quicker, snappier throttle response, making it a must have for all drive-by-wire vehicles. The SpeedForm Throttle Response Controller comes with (5) preset control modes for Stock, Eco, Comfort/Sport, Sport and Race applications. Each mode can further be adjusted with nine levels of sensitivity. This allows you to select the mode that works the best for your own personal driving style and needs. Stock - Acceleration is set to factory defaults. Display is NO. ECO - Designed for fuel economy. Display is EC. Comfort/Sport - Balances performance and fuel economy. Display is P1. Sport - Improves engine response for better performance during daily commuting. Display is P2. Race - Maximum performance with immediate throttle response. Display is P3. The SpeedForm Throttle Response Controller connects directly into the stock throttle position sensor found on the drive-by-wire gas pedal using an OEM style plug and play connector with no permanent modifications required. The Throttle Response Controller is 100% reversible and will not leave residual codes on the factory PCM making it warranty friendly.

• Stock, Eco, Sport/Comfort, Sport, and Race Modes
• Nine Positions of Sensitivity Adjustment
• Eliminates Drive-By-Wire Pedal Delay
• Easy Plug-and-Play Installation
• Enhances Vehicle Acceleration

This Part Fits:

The SourceLT will save hours of wiring & installation time! It is a small,solid-state6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone

The SourceLT will save hours of wiring & installation time! It is a small,solid-state6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone

This is an add-on BantamX for existing sPOD systems/controllers only! Controller not included. !!! NOTE !!! At least one sPOD controller must be connected in order for the system to work properly.The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.• Fully programmable, digital controlled system• 8 circuits rated at 30 amps at 12.5 VDC per circuit• 16-position terminal block (easily attach accessories)• 2 controller ports (RJ45) for Ethernet cables• Integrated low voltage cutoff (LVCO) battery protection w/ optional override• One ATM mini-style fuse for LVCO protection & reset• Failsafe self-healing fault protection system (from 1.5 to 30amps)• Current-sensing MOSFETs controlled by a microprocessor (no fuses & relays)• 100amp in-line fuse• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket• Operates on 12VDC or 24VDC• 8-position input terminal block for controlling outputs• Built-in Bluetooth capabilities for remote control• Protection against: overheating, over-current, shorts, reverse polarity & field collapse• Ignition control and safety lock-out for switches 1 and 2 (optional)• Up to 4 BantamX units can be daisy chained & controlled by one Touchscreen• On-demand wireless software updates/upgradesHARDWARE:• Powder coated steel base w/ built in hardware• Silicone gasket for weatherproofing• Aluminum lid• Vehicle specific mounting options• Robust insulated base and coverFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):Each switch ca

• Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‚Äòs electrical system

The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone

The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone

Have the freedom to control anywhere with the BantamX wireless switch controller from sPOD™. Designed to be paired with the sPOD™ app on your phone or tablet while saving hours on wiring and installation time. It is a small solid-state 8-circuit (expandable) control system that provides a clean and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX power control module, the mounting location options are endless! No cutting, fishing wires into the cab or tapping into the vehicle ‘s electrical system. It’s the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone. Pair the BantamX with the sPOD app on your phone or tablet, you have a controller that can be used anywhere. Backed by sPOD's 5-year manufacturer warranty*, stay in control with the sPOD™ BantamX power management system. Download the sPOD app from Apple App Store or Google Play.

• Due to the small footprint of the BantamX power control module, the mounting location options are endless! No cutting, fishing wires into the cab or tapping into the vehicle ‘s electrical system

sPOD SourceLT Mini6 vehicle-specific kit for Ford F-150 (’21-on) and Ford F-150 Raptor (’21-on) has been designed specifically to integrate the sPOD Mini6 panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.

• Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily

This Part Fits:

NOTE: This system will not fit the Jeep Wrangler 392 V8.

• Battery protection

This Part Fits:

**Please expect a 2-4 week lead time on product**The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.• Fully programmable, digital controlled system• 8 circuits rated at 30 amps at 12.5 VDC per circuit• 16-position terminal block (easily attach accessories)• 2 controller ports (RJ45) for Ethernet cables• Integrated low voltage cutoff (LVCO) battery protection w/ optional override• One ATM mini-style fuse for LVCO protection & reset• Failsafe self-healing fault protection system (from 1.5 to 30amps)• Current-sensing MOSFETs controlled by a microprocessor (no fuses & relays)• 100amp in-line fuse• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket• Operates on 12VDC or 24VDC• 8-position input terminal block for controlling outputs• Built-in Bluetooth capabilities for remote control• Protection against: overheating, over-current, shorts, reverse polarity & field collapse• Ignition control and safety lock-out for switches 1 and 2 (optional)• Up to 4 BantamX units can be daisy chained & controlled by one Touchscreen• On-demand wireless software updates/upgradesHARDWARE:• Powder coated steel base w/ built in hardware• Silicone gasket for weatherproofing•Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement• Universal & vehicle specific mounting options• Robust insulated base and coverFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):Each switch can be programmed for:•Dimming•Strobe

• ‚Ä¢ Fully programmable, digital controlled system‚Ä¢ 8 circuits rated at 30 amps at 12

This Part Fits:

The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone

This Part Fits:

The Trigger 6 SHOOTER Wireless Accessory Control System substantially saves your electronic accessories' installation time! Eliminate the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. It also adds functionality such as an RF remote control for activating installed accessories from outside the vehicle and dimming/flashing functions for installed lighting. In addition, fused circuits with LED indicators notify you of blown fuses. The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. Its buttons are back-lit and it is programmable for security or use with additional remotes. Several Trigger control boxes and remotes can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. No straining against seat belts to reach the dash, just a quick reach up to tap the remote. The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to "Trigger" lights from outside the vehicle whenever you might need to activate an accessory on demand.

• Built-in Bluetooth battery monitor - see connected battery voltage in real-time on the TRIGGER ACS PLUS app
• Backlit switches when optionally connected to 12 Volt power via an 8' long, thin 28 gauge harness
• You can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!
• Built in DIN connector for use of conventional toggle switches (harness sold separately)
• High intensity LED's indicate circuit status, blue for circuit on, red for blown f
• Low voltage cut off will shut down the 6 Shooter if battery voltage gets too low
• Waterproof case design, withstands temps from below freezing to 250 degrees F
• Built in fuses with o-ring sealed cover: two 30 amp, two 10 amp, two 5 amp
• RF Remote with rocker-style switches usable inside or outside the vehicle
• 100 amp fuse installed on positive input wire for whole system protection
• 12 to 24 volt input, 3 wires, ground, switched positive, battery positive
• Six 12-24 volt output harnesses with pre-installed waterproof connectors
• Includes six 8-foot-long wire harnesses with waterproof connectors
• Manual buttons for individual circuit power on top of control box
• Free 3-year warranty that covers manufacturing defects
• Wireless back-lit RF remote rocker switch module
• Two 30, two 10, and two 5 amp fused circuits
• Set custom backlight colors on the remote!
• Comes with switch labels too!
• Accepts 12-24 Volt input

Custom Switch Panel for 6th Gen Camaros. Switch panel mounts discretely in the center console by drilling 2 small holes in the bottom of the console. Keeps your unsuspecting passenger completely unaware of your extra power until the console is opened.Includes:Aluminum laser engraved and anodized switch panel.Switches for Nitrous Arm, Purge, Bottle Heater and Bottle Opener.Mounting tabs

• Quick and Easy Installation

This Part Fits:

If you have room for a gauge you can now also have a custom NX switch panel!! These switch panels fit into any 2-1/16 gauge pod and come with all the switches and LED indicator lights. The switch panel is a full billet aluminum design with laser etching for Nitrous, Bottle Heater, Purge, and Bottle Opener. The switch panel fits tightly in any 2 and 1/16 in. gauge pod, and comes with a keeper on the back side to keep it from moving or twisting. Comes with switches for, Bottle Opener, Nitrous Arm (with LED), Bottle Opener (with LED), Purge.

• Comes w/ Switches For Bottle Opener/Bottle Heater/ Nitrous/Purge