Fits 2005-2023 Toyota Tacoma 2WD 6-lug models, including Pre Runner, TRD Sport, TRD Off-Road, SR, and SR5.

The MaxTrac MaxPro Elite 4-inch front and 2-inch rear lift kit is a high-efficiency solution for lifting your 2WD Tacoma while preserving the original ride quality. Unlike spacer kits that can over-extend suspension components, MaxTrac utilizes a 4-inch lift spindle that lowers the wheel hub position. This design provides significant ground clearance and allows for larger tire fitment without requiring expensive crossmembers or permanent factory frame modifications.

This comprehensive kit (MPN: K886842F) includes FOX 2.0 Performance Series rear shocks to improve damping and control on various terrains. To accommodate the increased ride height safely, the kit comes with extended, DOT-compliant stainless steel braided brake lines. The rear is leveled using a 2-inch lift block and heavy-duty U-bolt set for a reliable and straightforward installation.

• 4-inch front lift spindles for factory-like geometry and turning radius
• FOX 2.0 Performance Series monotube rear shocks
• 2-inch rear lift blocks with zinc-plated U-bolts
• Extended DOT-compliant stainless steel braided brake lines
• Bolt-on installation with no frame cutting required
• Maintains factory track width and suspension feel

Fits select 2005-2023 Toyota Tacoma 2WD 6-lug models including Pre Runner, TRD Off-Road, SR5, and TRD Sport.

The MaxTrac K886842 MaxPro 4-inch front and 2-inch rear lift kit provides a leveled stance and increased ground clearance for your 2WD Tacoma without the complexity of a full 4WD-style crossmember kit. By utilizing specially engineered lift spindles that lower the wheel hub position, this kit raises the vehicle while maintaining factory suspension geometry, steering rack location, and ride quality. This design eliminates the need for labor-intensive frame cutting or permanent modifications.

This comprehensive kit includes extended, DOT-compliant stainless steel braided brake lines to accommodate the increased travel, along with rear lift blocks and U-bolts. To ensure controlled dampening and a smooth ride, MaxTrac includes a pair of rear twin-tube shocks specifically valved for this application. Note that some trimming may be required for optimal fender well clearance depending on your wheel and tire combination.

• 4-inch front lift via ductile iron lift spindles
• 2-inch rear lift via blocks and U-bolts
• Preserves factory turning radius and ride comfort
• 100% bolt-on installation; no frame cutting required
• Extended DOT-compliant stainless steel braided brake lines included
• Includes MaxTrac rear twin-tube shocks
• Manufacturer Part Number: K886842

Fits 2015-2020 Ford F-150 2WD models including King Ranch, Lariat, Limited, Platinum, SSV, XL, and XLT.

The MaxTrac Suspension K883242 MaxPro 4.5-inch/2-inch lift kit is an efficient, bolt-on solution for leveling and lifting your 2WD F-150. By replacing the factory spindles with MaxTrac ductile iron lift spindles, this system lowers the wheel hub position to provide 4.5 inches of front lift. This approach maintains your truck's factory suspension geometry, turning radius, and ride quality without the need for labor-intensive crossmembers or permanent frame cutting.

To complement the front lift, the rear is raised 2 inches using heavy-duty blocks and U-bolts. The kit also includes MaxTrac twin-tube shocks specifically valved for this height and extended, DOT-compliant stainless steel braided brake lines to ensure proper fitment and safety at the new ride height.

• 4.5" front lift spindles for 2WD-only fitment
• 2" rear lift blocks and zinc-plated U-bolts
• Includes MaxTrac twin-tube rear shocks
• Extended DOT-compliant stainless steel braided brake lines
• 100% bolt-on installation; no frame modifications required
• Maintains factory-like ride quality and turning radius
• Manufacturer Part Number: K883242

Fits 2001-2009 Ford Ranger 2WD models with coil spring front suspension and without Stabilitrak.

The MaxTrac Suspension 4-inch spindle lift kit provides a straightforward solution for lifting your 2WD Ford Ranger while maintaining factory ride quality and turning radius. By utilizing cast lift spindles that lower the wheel hub position, this kit increases front ground clearance without the need for expensive crossmembers or permanent factory frame cuts. This design preserves original suspension geometry for predictable handling.

To achieve a leveled stance, the kit includes rear lift shackles that provide 2 inches of lift. This complete system allows for larger wheel and tire combinations at a fraction of the cost and labor required for traditional suspension lifts.

• Provides 4" front lift and 2" rear lift
• Maintains factory-like ride quality and turning radius
• Bolt-on installation requires no frame cutting
• Kit includes front lift spindles and rear lift shackles
• Manufactured in the USA
• Manufacturer Part Number: K883042B

Fits 2003-2008 Dodge Ram 2500 and 3500 2WD Diesel models with a 4.125-inch axle.

The MaxTrac MaxPro 6-inch lift kit (MPN: K882262DL) provides a cost-effective, high-performance solution for lifting your 2WD Dodge Ram without the need for labor-intensive frame cutting or expensive crossmembers. This system utilizes a combination of factory-height spindles—engineered to lower the wheel hub position—and lifted coil springs to achieve 6 inches of front lift. By retaining the factory geometry, this kit maintains an OE-style ride quality and turning radius while leveling the truck's stance.

The package includes MaxTrac twin-tube shocks for both the front and rear to ensure consistent damping. For the rear, 2.5-inch lift blocks and heavy-duty U-bolts provide the necessary height. The spindles are accompanied by extended, DOT-compliant, stainless steel braided brake lines to accommodate the increased travel and height safely.

• 6-inch front lift achieved via lowering spindles and coil springs
• 2.5-inch rear lift via blocks and U-bolts
• Includes MaxTrac twin-tube shocks for all four corners
• DOT-compliant stainless steel braided brake lines included
• No factory frame cuts or expensive crossmembers required
• Specifically for 2WD Diesel models with 4.125-inch axle diameter

Fits select 2007-2017 Chevrolet Silverado 1500 and GMC Sierra 1500 2WD/4WD models without Magneride.

The MaxTrac K331336S lowering spindle kit is engineered to provide a significant drop while maintaining the factory ride quality and suspension geometry of your GM truck. This kit offers versatility in your vehicle's stance, allowing for either a 3-inch or 4-inch front drop paired with a 5-inch or 6-inch rear drop. By utilizing lowering spindles in the front, you preserve the original steering and suspension kinematics, ensuring your truck handles predictably even at a lower ride height.

The rear suspension is modified using a flip kit to relocate the axle, while twin-tube shocks are included to optimize damping and ride comfort for the revised height. Constructed from high-strength materials, this kit is designed as a direct replacement for factory components to achieve a leveled, aggressive look without sacrificing durability.

• Fitment: 2007-2017 Chevrolet Silverado / GMC Sierra 1500 (2WD/4WD)
• Front Drop: 3-inch or 4-inch (Spindle-based)
• Rear Drop: 5-inch or 6-inch (Flip kit-based)
• Shock Type: Included rear twin-tube shocks
• Compatibility: For models WITHOUT Magneride only
• Manufacturer Part Number: K331336S

Fits select 2007-2021 Toyota Tundra 4WD models, including Base, SR, SR5, Limited, Platinum, 1794 Edition, Trail, Nightshade, and TRD Pro.

This MaxTrac Suspension Component Box (Box 1) features heavy-duty front steering knuckles engineered to maintain proper geometry and steering alignment as part of a lift system. Cast from high-strength ductile steel, these knuckles provide the structural integrity required to handle larger wheel and tire packages without compromising the factory spindles.

Each knuckle is finished in a black e-coat to protect the ductile steel against corrosion and road debris. Designed as a direct-fit component for the 4WD Tundra chassis, these knuckles ensure your suspension geometry remains within specification for improved handling and tire wear.

• Manufacturer Part Number: 946760-1
• Material: Cast Ductile Steel
• Finish: Corrosion-Resistant Black E-Coat
• Placement: Front (Driver and Passenger Side)
• Inclusions: Steering Knuckles (Component Box 1)
• Drive Type: 4WD Only

Fits select 2014-2020 Cadillac Escalade, Chevrolet Silverado/Suburban/Tahoe, and GMC Sierra/Yukon (4WD, Non-Magneride).

This MaxTrac Suspension component box features front steering knuckles engineered to maintain proper geometry and structural integrity on GM K1500-platform 4WD vehicles. Cast from high-strength ductile steel, these knuckles are designed to replace factory components in specific lift applications, providing the necessary clearance and durability for off-road use or larger wheel-and-tire combinations. Each knuckle is finished in a black e-coat to provide superior corrosion resistance against road salt and moisture.

• Manufacturer Part Number: 941570-1
• Material: Cast Ductile Steel
• Finish: Black E-Coat
• Placement: Front (Left and Right)
• Compatibility: Designed for 4WD models without Magneride suspension
• Included: One pair of front steering knuckles (Component Box 1)

Fits select 2007-2016 Cadillac Escalade, Chevrolet Silverado, Tahoe, Suburban, Avalanche, and GMC Sierra/Yukon (K1500 4WD models).

Engineered for durability and precision, these MaxTrac front steering knuckles are a critical component for maintaining proper suspension geometry on lifted 4WD GM trucks and SUVs. These knuckles are precision-cast from high-strength ductile steel to handle the increased stresses of off-road use and larger wheel-and-tire combinations. Each unit is finished with a black E-coat to ensure long-lasting corrosion resistance in harsh environments.

• Precision-cast from high-strength ductile steel for maximum durability
• Protective black E-coat finish resists rust and corrosion
• Specific for 4WD K1500 chassis configurations
• Includes steering knuckles as part of Component Box 1
• Manufacturer Part Number: 941370-1

Fits select 2005-2023 Toyota Tacoma 2WD 6-lug models (Base, Pre Runner, SR, SR5, TRD Sport, TRD Off-Road, and X-Runner). Achieve 4 inches of front lift without sacrificing ride quality or factory suspension geometry using MaxTrac 706840 front lift spindles.

These spindles are cast from high-strength ductile iron and finished with a durable e-coat to prevent corrosion. By replacing the factory steering knuckles, these spindles provide true suspension lift while maintaining OE-like steering characteristics. This kit includes extended DOT-compliant brake lines to accommodate the increased ride height and all necessary mounting hardware for a direct-fit installation.

• Provides 4 inches of front lift for 2WD 6-lug applications
• Cast ductile iron construction for maximum durability
• Protective e-coat finish resists rust and environmental debris
• Clears up to 33x12.50 tires
• Requires 17-inch or larger wheels with maximum 4.75-inch backspacing
• Includes extended DOT-approved brake lines and mounting hardware
• Manufacturer Part Number: 706840

Note: These spindles are not compatible with factory wheels and tires. Aftermarket wheels meeting the 17-inch minimum size and backspacing requirements are required for installation.

Fits select 2007-2021 Toyota Tundra 2WD models including Base, SR, SR5, Limited, Platinum, 1794 Edition, Nightshade, and Trail. These 3.5-inch lift spindles provide a straightforward solution for increasing front-end ground clearance while maintaining factory-like ride quality and suspension geometry.

Constructed from heavy-duty ductile iron and finished with a protective e-coat for long-term corrosion resistance, these spindles replace the factory components to lower the wheel hub mounting point. This design allows for larger tire fitment without the need for additional leveling kits or strut modifications that can stiffen the ride. This kit (MPN 706735) includes extended DOT-compliant brake lines to accommodate the increased steering travel and height.

• 3.5-inch front lift height
• Constructed from high-strength ductile iron
• Black e-coat finish for maximum durability
• Includes DOT-approved extended brake lines
• Compatible with factory wheels and tires
• Recommended wheel: 18-inch or larger with 6.5-inch backspacing
• Recommended tire size: 33x12.50

Fits 2009-2020 Ford F-150 2WD models. MaxTrac Suspension part number 703440 provides a true 4-inch front lift for two-wheel drive F-150s, allowing for larger wheel and tire combinations without sacrificing ride quality.

These spindles are engineered to replace the factory components, maintaining OEM suspension geometry and steering feel. Cast from high-strength ductile steel and finished with a durable black e-coat for superior corrosion resistance, these spindles are designed for long-term durability in harsh environments. This kit includes DOT-compliant extended brake lines, ensuring your braking system maintains proper slack and safety at the new ride height.

• True 4-inch front lift height
• High-strength ductile steel construction
• Corrosion-resistant black e-coat finish
• Includes extended DOT-compliant brake lines
• Maintains factory ride quality and steering geometry
• Manufacturer Part Number: 703440

Fits 2001-2009 Ford Ranger 2WD models equipped with torsion bar suspension and without Stabilitrak.

These MaxTrac 4-inch front lift spindles (MPN 703030C) are a robust solution for leveling your stance or clearing larger tires without sacrificing ride quality. Precision-engineered from high-strength ductile iron and finished with a protective e-coat, these spindles provide a durable alternative to standard lift kits by maintaining factory steering geometry. The bolt-on design replaces the factory spindles and includes all necessary hardware for a straightforward installation.

• Provides 4 inches of front lift
• Constructed from heavy-duty ductile iron for maximum strength
• Corrosion-resistant e-coat finish
• Increases track width by 0.5 inches per side
• Recommended wheel size: 15 inches or larger with 3.75-inch backspacing
• Compatible with stock wheels and tires
• Manufacturer Part Number: 703030C

Fits select 2001-2009 Ford Ranger 2WD models with coil spring front suspension and without Stabilitrak, including Edge, EV, Sport, STX, Tremor, XL, and XLT trims.

MaxTrac front lift spindles provide a true 4-inch lift for your Ford Ranger, increasing ground clearance and allowing for larger tire fitment without compromising ride quality. Unlike spacer-based lifts that can over-extend suspension components, these spindles maintain factory-like geometry and ball joint angles. This is a direct replacement for your factory spindles and is engineered to handle off-road terrain or daily street use.

Constructed from high-strength ductile iron and finished with a durable black e-coat, these spindles are built to resist corrosion. The design increases track width by 0.5 inches per side for improved stability. Each set comes with all necessary hardware for a complete installation and is compatible with stock wheels and tires.

• Manufacturer Part Number: 703030B
• Lift Height: 4 inches
• Material: Ductile iron with black e-coat finish
• Track Width: Increases 0.5 inches per side
• Recommended Wheel Size: 15-inch or larger with 3.75-inch backspacing
• Recommended Tire Size: 31x10.50
• Fits factory wheels and tires
• Installation hardware included

Fits 1998-2000 Ford Ranger 2WD (EV, Splash, XL, XLT) equipped with coil spring suspension and without Stabilitrak.

These MaxTrac Suspension 4-inch lift spindles provide a straightforward way to increase ground clearance and fit larger tires on your 2WD Ford Ranger without sacrificing ride quality. By relocating the wheel hub position rather than compressing the factory springs, these spindles maintain your original suspension geometry and comfort levels. Each unit is precision-engineered to be a direct bolt-on replacement for the stock components.

Built for durability, these spindles are cast from high-strength ductile steel to handle the stresses of daily driving and off-road use. The black E-coat finish provides long-lasting protection against corrosion and road debris.

• Provides 4 inches of front lift
• Constructed from heavy-duty cast ductile steel
• Durable black E-coat finish for corrosion resistance
• Maintains factory ride quality and handling characteristics
• Direct bolt-on installation using factory mounting points
• Sold as a pair (driver and passenger side)
• Manufacturer Part Number: 703030A

Fits select 2019-2024 Ram 1500 and Ram 1500 Classic (2WD models). This pair of MaxTrac 4-inch front lift spindles provides a significant increase in ground clearance and a leveled stance without compromising factory ride quality or requiring cutting or welding. Unlike spacer kits that can stress factory components, these spindles maintain proper suspension geometry and track width.

• Manufactured from high-strength ductile steel for superior durability
• Finished in a corrosion-resistant black e-coat
• Includes extended DOT-compliant brake lines for a complete installation
• Replaces factory steering knuckles while utilizing stock hubs and bearings
• Manufacturer Part Number: 702740

These spindles are engineered for 2WD trucks only and offer a straightforward bolt-on solution for fitting larger tire and wheel combinations. By lifting from the spindle rather than the spring or strut, you preserve the factory suspension travel and damping characteristics.

Fits 2003-2008 Dodge Ram 1500, 2500, and 3500 2WD models.

This MaxTrac 3.5-inch front lift spindle kit (MPN: 702235) provides a reliable method to increase front-end clearance on your Dodge Ram while maintaining factory-like steering geometry and ride quality. Cast from high-strength ductile iron and finished with a durable e-coat, these spindles are built to handle the demands of heavy-duty trucks. The kit includes extended DOT-compliant brake lines and all necessary mounting hardware to ensure a direct-fit installation.

Please note that this modification increases the front track width by 1.375 inches per side. These spindles are compatible with stock dually wheels, but will not fit stock single rear wheel (SRW) wheels and tires due to backspacing requirements.

• Lift Height: 3.5 inches
• Construction: High-strength ductile iron
• Finish: Black E-coat for corrosion resistance
• Track Width Increase: 1.375 inches per side
• Included Hardware: Extended DOT-compliant brake lines, mounting hardware
• Recommended Wheel Size: 17-inch or larger with 4.75-inch backspacing
• Recommended Tire Size: Up to 33x12.50
• Manufacturer Part Number: 702235

Fits 2002-2024 Dodge Ram 1500, Ram 1500, and Ram 1500 Classic 2WD models across all trims including Sport, Rebel, and Tradesman.

MaxTrac 4.5-inch lift spindles are the most effective way to increase front-end clearance on a 2WD Ram 1500 without sacrificing ride quality. Unlike spacer kits that compress factory springs, these spindles relocate the hub mounting point lower, maintaining your original suspension geometry, spring rate, and turning radius. This provides a true 4.5 inches of lift while keeping the factory-smooth ride.

Constructed from high-strength ductile iron, these spindles are significantly more durable than stock units and finished with a corrosion-resistant e-coat. Each kit includes extended DOT-compliant stainless steel brake lines and all required hardware to ensure a straightforward installation that bolts directly to factory mounting points.

• Lift Height: 4.5 inches (Front)
• Material: Ductile iron with black e-coat finish
• Wheel Requirement: 17-inch or larger with maximum 5.5-inch backspacing
• Recommended Tire: Up to 35x12.50 (stock 17-inch+ wheel/tire combos will fit)
• Components: Pair of lift spindles (702145), extended DOT-approved brake lines, and mounting hardware
• Warranty: Backed by a limited lifetime warranty

Fits 2019-2025 Chevrolet Silverado/Suburban/Tahoe, GMC Sierra/Yukon/Yukon XL, and Cadillac Escalade/ESV 2WD models.

MaxTrac Suspension front lift spindles (Part #701935) provide a reliable and effective way to increase front-end ground clearance by 3.5 inches without sacrificing factory ride quality. Unlike spacer kits that can over-extend suspension components, these spindles maintain your truck or SUV's original geometry while providing the height needed for larger wheel and tire combinations.

Each spindle is cast from high-strength ductile steel, providing superior durability compared to standard grey iron. The black e-coat finish offers long-term corrosion resistance in harsh environments. This kit also includes extended, DOT-compliant brake lines to ensure your braking system remains safe and functional at the new ride height.

• Provides 3.5-inch front lift
• Maintains factory ride quality and suspension geometry
• Constructed from heavy-duty ductile steel for maximum strength
• E-coated black for superior corrosion protection
• Includes extended DOT-compliant brake lines
• Manufacturer Part Number: 701935

Fits select 1999-2007 Chevrolet Silverado/Sierra 1500, Tahoe, Yukon, Suburban, Avalanche, and Cadillac Escalade 2WD (Coil/Torsion models).

Achieve a reliable 3-inch front lift while maintaining factory ride quality with these MaxTrac lift spindles. Unlike spacers or taller springs that can alter suspension geometry and ride stiffness, these replacement spindles provide lift by relocating the wheel hub position. Cast from high-strength ductile iron, these spindles are designed for durability and are e-coated for superior corrosion resistance against the elements.

• Lift Height: 3.0 Inches
• Construction: High-strength ductile iron
• Finish: Black E-coat for corrosion resistance
• Track Width: Increases track width by 0.5 inches per side
• Wheel Compatibility: 17-inch or larger wheels required
• Backspacing: 4-5/8 inch maximum backspacing recommended
• Recommended Tire Size: 33x12.50 (stock 17-inch wheel/tire combos will fit)
• MPN: 700930

Each set includes all necessary hardware for a straightforward installation to factory mounting points. These spindles are an ideal solution for truck owners looking to clear larger tires without compromising the vehicle's OE handling characteristics.

Fits select 2015-2022 Chevrolet Colorado and GMC Canyon 2WD models (Base, LT, WT, Z71, SL, SLE, SLT, Denali, and Elevation).

Achieve a true 4-inch front lift while maintaining factory ride quality with MaxTrac Suspension lift spindles. These spindles are cast from high-strength ductile steel, providing a rugged lifting solution that replaces the factory units without compromising steering geometry or track width. Each spindle features a durable black E-coat finish to protect against corrosion and road debris.

Because increasing ride height requires additional length for your hydraulic system, this kit includes a pair of DOT-compliant extended brake lines. This ensures a safe, bolt-on installation that doesn't overextend your factory components at full suspension droop.

• Precision-engineered 4-inch front lift height
• Cast from heavy-duty ductile steel for maximum strength
• Corrosion-resistant black E-coat finish
• Includes DOT-compliant extended stainless steel braided brake lines
• Direct bolt-on replacement for factory spindles
• Designed specifically for 2WD applications
• Manufacturer Part Number: 700440

Fits select 2019-2025 Chevrolet Silverado/GMC Sierra 1500 and 2021-2025 Cadillac Escalade, Chevrolet Tahoe/Suburban, and GMC Yukon/Yukon XL (2WD/4WD).

Achieve a clean, leveled stance without compromising your vehicle's ride quality or suspension geometry. MaxTrac lowering spindles are engineered to provide a 2-inch front drop while maintaining factory turning radius and clearance for critical suspension components. Unlike lowering springs, these spindles allow you to keep your full suspension travel and factory-rate coils, ensuring a smooth, OEM-like ride.

Constructed from high-strength ductile steel, these spindles are built to handle the weight and performance demands of modern GM trucks and SUVs. The black e-coat finish provides superior corrosion resistance, protecting the components from road salt and environmental debris. This kit includes a pair of front spindles designed for a direct-replacement installation on both 2WD and 4WD models.

• Part Number: 101920
• Drop Height: 2 Inches
• Material: Ductile Steel
• Finish: Black E-Coating
• Maintains factory ride quality and alignment geometry
• Direct replacement for factory spindles
• Sold as a pair

Fits select 2015-2020 Cadillac Escalade/ESV, Chevrolet Silverado 1500, Suburban, Tahoe, and GMC Sierra 1500, Yukon/XL (2WD/4WD).

Achieve a precise 2-inch front drop while maintaining your vehicle's factory ride quality with these MaxTrac Suspension lowering spindles. Unlike lowering springs or struts that can alter suspension travel and compression, these spindles relocate the wheel mounting point higher on the casting. This allows you to lower the center of gravity and improve the stance of your GM truck or SUV without affecting the original spring rate, shock valving, or suspension geometry.

Constructed from high-strength ductile iron, these spindles are engineered to meet or exceed OEM specifications for durability and fitment. The black e-coat finish provides superior corrosion resistance against road debris and moisture, ensuring long-term reliability. These are a direct bolt-on replacement for your factory spindles, retaining all original steering and braking components.

• Provides a fixed 2-inch front-end lowering
• Maintains factory suspension geometry and ride comfort
• Heavy-duty ductile iron construction for maximum strength
• Corrosion-resistant black e-coat finish
• Compatible with both 2WD and 4WD models
• Direct bolt-on installation to factory mounting points
• Manufacturer Part Number: 101520C

Fits select 2007-2019 Cadillac Escalade, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, and GMC Sierra, Yukon models. These MaxTrac 2-inch lowering spindles are the ideal way to drop the front of your GM truck or SUV without sacrificing ride quality. By relocating the wheel hub position higher on the spindle, you achieve a true 2-inch drop while maintaining factory suspension geometry and steering rack travel.

Constructed from high-strength ductile steel, these spindles are engineered for durability and a precise fit. Each spindle is finished in a black E-coat for superior corrosion resistance against the elements. This kit includes a pair of spindles designed for straightforward installation using factory mounting points.

• Part Number: 101320
• Drop Height: 2 Inches
• Material: Ductile Steel
• Finish: Black E-coat
• Quantity: Pair (Driver and Passenger Side)
• Note: Does NOT fit models equipped with aluminum suspension components

Fits select 1999-2007 Cadillac Escalade, Chevrolet Silverado, Suburban, Tahoe, and Avalanche, and GMC Sierra and Yukon models.

Lower your front ride height by a full 2 inches without compromising ride quality. MaxTrac 100920 lowering spindles are engineered to drop your vehicle while maintaining factory suspension geometry. By shifting the wheel hub position upward, these spindles allow you to retain original shock travel and spring rates, ensuring the street comfort you expect from your GM truck or SUV.

These spindles are cast from high-strength ductile steel and finished with a durable black e-coat to provide superior corrosion resistance in any environment. Designed as a direct bolt-on replacement, they mount to factory locations and require no additional hardware for realignment, making them a preferred choice for achieving a leveled or slammed stance.

• Front Drop: 2.0 Inches
• Material: High-strength ductile steel
• Finish: Corrosion-resistant black e-coat
• Quantity: Pair (Driver and Passenger sides)
• Installation: Direct bolt-on to factory mounting points
• MPN: 100920

Fits select 1988-1999 Chevrolet C1500, C2500, C1500/C2500 Suburban, Tahoe, and GMC Yukon 2WD models (5/6-lug).

MaxTrac Suspension 100520H lowering spindles are the most effective way to drop the front of your GM truck or SUV without compromising ride quality. By relocating the wheel pin 2 inches higher on the spindle casting, these components provide a clean 2-inch drop while maintaining factory steering geometry, suspension travel, and spring rates. Unlike lowering springs, these spindles do not increase harshness or cause premature shock wear.

Built for durability in demanding street and work environments, these spindles are cast from high-strength steel and finished with a black E-coat to resist corrosion and road debris. These are a direct-fit replacement for your OE spindles and are designed to work with factory-style ball joints and tie rod ends.

• Part Number: 100520H
• Drop Height: 2-Inch Front
• Material: Cast Steel
• Finish: Black E-Coat
• Maintains factory ride quality and alignment specs
• Sold as a pair (left and right)

Fits select 2021-2025 Ford F-150 4WD models, including XL, XLT, Lariat, King Ranch, Platinum, STX, SSV, and Tremor trim levels.

Upgrade your 4WD Ford F-150 with the ICON Vehicle Dynamics Front Knuckle Kit, designed to replicate the optimized suspension geometry of the F-150 Tremor. When paired with ICON Tremor-specific coilover kits, this knuckle set facilitates a 20% increase in front wheel travel and provides 3.5-4.5 inches of front lift over stock. The revised geometry improves ball joint angles at increased ride heights, ensuring better alignment and longevity for your suspension components.

Constructed from high-strength, single-piece ductile iron, these knuckles are precision CNC-machined to withstand the rigors of aggressive off-road use. The pocketed design minimizes un-sprung weight while maintaining the factory track width and steering radius. Each unit is finished in a durable black powder coat for maximum corrosion resistance and is backed by ICON’s Limited Lifetime Warranty.

• Replicates F-150 Tremor suspension geometry for increased wheel travel
• Provides 3.5-4.5" of front lift over stock (when used with ICON coilovers)
• Single-piece high-strength CNC-machined ductile iron construction
• Pocketed design reduces un-sprung weight for better damping response
• Maintains factory track width and OE steering geometry
• Durable black powder coat finish
• Manufacturer Part Number: 94000
• ICON Limited Lifetime Warranty

Fits select 2022-2024 Toyota Tundra (SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone).

The ICON Vehicle Dynamics Front Steering Knuckle Kit is a critical component of the ICON 6-inch Lift Performance Suspension System. Specifically engineered for the 2022-2024 Toyota Tundra, these knuckles feature a 4-inch drop designed to complement ICON high-clearance front crossmembers. Each knuckle is CNC-machined from a single piece of high-strength ductile iron, providing the durability needed for aggressive off-road use while maintaining factory track width and minimizing un-sprung weight.

By optimizing steering arm geometry, ICON has virtually eliminated bump steer throughout the entire wheel travel range, ensuring predictable handling even in demanding conditions. This kit is designed to accommodate 37-inch tires with full articulation, though larger tires may be fitted with additional fender trimming and modifications. The knuckles are finished in a durable black powder coat for long-term corrosion resistance and include replaceable steering stops for easy maintenance.

• Single-piece high-strength CNC-machined ductile iron construction
• Built-in 4-inch drop for optimized suspension geometry
• Reduces un-sprung weight through a precision pocketed design
• Eliminates bump steer for improved steering response and handling
• Maintains factory track width and steering geometry
• Durable black powder coat finish and replaceable steering stops
• Manufacturer Part Number: 51014
• ICON Limited Lifetime Warranty