Fits 2018 Toyota Camry and 2019 Lexus 300.

The Tanabe TTB198F Front Strut Tower Bar is engineered to bridge the front strut towers, providing critical structural reinforcement to the vehicle chassis. By linking these points, the bar significantly reduces flex during hard cornering and over uneven surfaces, maintaining consistent suspension geometry for more predictable handling and sharpened steering response.

This bar is designed as a direct bolt-on solution, mounting to factory points for a straightforward installation that requires no permanent vehicle modifications. Its high-strength construction ensures long-term durability while effectively managing the lateral forces transmitted through the suspension.

• Manufacturer Part Number: TTB198F
• Product Type: Front Strut Tower Bar
• Chassis Fitment: 2018 Toyota Camry and 2019 Lexus 300
• Installation: Direct bolt-on to OE mounting points
• Material: Reinforced aluminum center beam with high-strength end plates
• Benefits: Reduced chassis deflection and improved front-end rigidity

Fits 2016-2017 Honda Civic (EX, LX, Si, Sport, and Type R).

The Tanabe Sustec Front Strut Tower Bar is engineered to reinforce the chassis and improve the handling dynamics of your 10th-generation Honda Civic. By physically connecting the front strut towers, this bar significantly reduces chassis flex during aggressive cornering. This ensures the suspension geometry remains consistent under load, resulting in sharper steering response and improved feedback for the driver.

• Reduces chassis flex to maintain consistent suspension geometry
• Improves steering precision and front-end stability
• Direct bolt-on installation using factory mounting points
• Rigid center bar construction designed to clear engine components
• Manufacturer Part Number: TTB197F

Fits 2015 Subaru WRX and WRX STI models.

The Tanabe Sustec Front Strut Tower Bar (TTB188F) is a critical chassis reinforcement designed to eliminate strut tower flex during aggressive cornering and heavy braking. By tying the front suspension towers together, this bar maintains the vehicle's alignment geometry under load, resulting in more precise steering feel and improved handling predictability.

• Increases chassis rigidity to reduce strut tower deflection
• Improves steering response and front-end stability
• Manufactured from high-strength aluminum for weight savings and durability
• Features reinforced end plates for a secure, direct-fit mounting
• Low-profile design allows for engine bay clearance
• Manufacturer Part Number: TTB188F

This strut tower bar is a direct bolt-on upgrade that installs onto the factory strut mounting points with basic hand tools. It is an essential modification for enthusiasts looking to sharpen the turn-in characteristics of their VA-chassis Subaru.

Fits 2014-2015 Mazda 6 (Grand Touring, Sport, and Touring models).

The Tanabe Sustec Front Strut Tower Bar (TTB173F) is a critical chassis reinforcement designed to eliminate strut tower flex during aggressive cornering and high-load maneuvers. By tying the front shock towers together, this bar helps maintain proper suspension geometry and alignment, resulting in more predictable handling and improved steering feedback.

• Manufacturer Part Number: TTB173F
• Series: Sustec Strut Tower Bar
• Reduces chassis deflection for enhanced steering response
• High-strength construction designed for 2014-2015 Mazda 6 engine bays
• Direct-fit application for factory mounting points

Fits 2013-2015 Lexus GS350 Base and F Sport models.

The Tanabe Sustec Front Strut Tower Bar (TTB170F) is an essential upgrade for drivers looking to sharpen the handling and steering response of their GS350. By physically linking the tops of the front shock towers, this bar reinforces the chassis and prevents the strut towers from leaning or flexing under heavy cornering loads. This ensures the suspension geometry remains consistent, providing more predictable turn-in and improved tire contact with the road.

• Increases chassis rigidity to minimize body flex during spirited driving
• Enhances steering precision and front-end feedback
• Designed as a direct bolt-on for factory mounting locations
• Durable construction engineered to handle high-stress engine bay environments
• Manufacturer Part Number: TTB170F

Fits 2008-2014 Subaru Impreza WRX and WRX STI models (including Limited, Premium, and Special Edition trims).

The Tanabe Sustec Front Strut Tower Bar (TTB140F) is a critical chassis reinforcement designed to eliminate suspension tower flex during high-load cornering. By tying the shock towers together, this bar ensures that the suspension geometry remains stable, resulting in more predictable handling and sharpened steering response. Crafted from ultra-lightweight, double-walled reinforced aluminum, this bar provides maximum rigidity without adding unnecessary weight to the front end.

• Reinforced double-walled aluminum center bar for superior strength-to-weight ratio.
• Ultra-low profile design ensures clearance in the engine bay while maintaining a clean aesthetic.
• Heavy-duty steel mounting brackets finished in signature Tanabe red.
• Direct bolt-on installation to factory strut mounting points; no drilling or modification required.
• Manufacturer Part Number: TTB140F

The Tanabe Sustec Front Strut Tower Bar (TTB121F) provides critical chassis reinforcement for select 2007-2014 Scion and Toyota compacts. By physically linking the front strut towers, this brace minimizes chassis flex during aggressive cornering and high-load maneuvers, keeping the suspension geometry stable for sharper steering response and improved handling precision.

Built to handle the stresses of daily driving and spirited use, the Sustec series bar eliminates "tower shimmy" and improves overall structural rigidity. This is a direct bolt-on component designed to bridge the shock towers, providing a more connected feel between the driver and the road without compromising ride quality.

• Reduces chassis flex to maintain consistent suspension alignment
• Enhances steering precision and front-end feedback
• Direct bolt-on fitment using factory mounting points
• Series: Sustec Strut Tower Bar
• Position: Front
• Manufacturer Part Number: TTB121F

Fitment: Fits 2008-2014 Scion xD (Base) and 2007-2013 Toyota Yaris (Base, L, LE, S, and SE).

Fits 2003-2006 Nissan 350Z (Base, Enthusiast, Performance, Touring, Track, 35th Anniversary, and Grand Touring).

The Tanabe Sustec Front Strut Tower Bar (TTB063F) is engineered to enhance the handling precision of the Nissan 350Z by reducing chassis flex. By physically linking the front strut towers, this bar increases front-end rigidity, preventing the towers from leaning during hard cornering. This results in more predictable suspension geometry and improved steering response for the Z33 chassis.

• Reduces structural flex for sharper steering feel
• Maintains consistent suspension geometry under load
• Direct bolt-on design for straightforward installation
• Compatible with factory mounting points
• Manufacturer Part Number: TTB063F

Fits 2000-2005 Toyota Celica GT and GTS (ZZT231) models.

The Tanabe Sustec Front Strut Tower Bar is an essential chassis reinforcement designed to eliminate flex at the suspension mounting points. By tying the front strut towers together, this bar maintains consistent suspension geometry during hard cornering and aggressive driving maneuvers. This results in sharper steering response, reduced body roll, and a more planted feel on both the street and the track.

• Series: Sustec
• Position: Front
• Application: Reduces chassis flex and improves steering precision
• Compatibility: Designed specifically for the ZZT231 chassis
• Manufacturer Part Number: TTB036F

Fits 1993-1998 Toyota Supra Base and Twin Turbo (JZA80) models.

The Tanabe Sustec Front Strut Tower Bar (TTB012F) is a performance upgrade designed to increase chassis rigidity by bracing the front shock towers. By reinforcing the front end, this strut bar minimizes chassis flex during high-load cornering, ensuring the suspension maintains its geometry for improved steering response and handling predictability.

• Increases structural rigidity to reduce front-end chassis deflection
• Improves steering precision and tactile feedback
• Direct bolt-on fitment to factory mounting points
• Durable construction designed for high-performance street and track use
• Manufacturer Part Number: TTB012F

Fits select 2015-2023 Audi A3, S3, RS3 and Volkswagen Golf, GTI, Golf R, Alltrack, and Tiguan models.

The SuperPro TRC5000 fixed offset upper strut mount set is engineered for the VW/Audi MQB platform to address the inherent lack of factory front camber adjustment. By adding approximately 1.0 degree of negative camber, these mounts significantly improve front-end grip and turn-in response with minimal impact on NVH (Noise, Vibration, Harshness). This fixed offset design provides a tactile upgrade for the driver, offering enhanced steering precision and communication through the wheel.

• Provides ~1.0° of additional negative camber for improved cornering
• Maintains factory-like ride quality with low NVH impact
• Engineered for the MQB chassis platform
• Compatible with OEM-diameter springs
• Manufacturer Part Number: TRC5000

Installation Notes: This kit is designed for use with OEM springs or aftermarket springs that retain the original diameter and design. It is not compatible with most coilovers or aftermarket struts that alter the shaft diameter. For optimal performance, service life, and NVH mitigation, OEM radial bearings must be replaced with new components at the time of installation.

Fits select 2004-2017 Chevrolet Caprice, SS and Pontiac G8, GTO.

The SuperPro SPF1590BK Front Poly Upper Strut Mount Kit is a high-performance replacement for soft or worn-out factory rubber mounts. Utilizing a proprietary engineering-grade polyurethane formula, these mounts are designed to maintain precise steering geometry and improve handling without the premature failure often associated with OE components. This kit is specifically formulated to remain quiet while resisting degradation from road grime, oils, coolants, and extreme operating temperatures.

• Proprietary polyurethane formula for durability and quiet operation
• Maintains alignment and steering geometry under heavy loads
• Resistant to extreme temperatures, oils, water, and coolants
• Direct replacement for OE upper strut mount bushings
• Lifetime Warranty
• Engineered and manufactured in Australia
• Manufacturer Part Number: SPF1590BK

Fits select 2003-2024 Toyota 4Runner, Tacoma, FJ Cruiser, and Lexus GX460/GX470.

The SuperPro RS002 ReadyStrut Top Cap is a high-performance replacement for original equipment (OE) strut tops. As a critical link between the strut assembly and the chassis, the upper mount significantly influences steering precision and braking stability. Replacing worn rubber mounts with these Australian-engineered polyurethane versions restores handling feel and maintains proper suspension alignment.

Manufactured using SuperPro’s proprietary polyurethane mix, these mounts are designed to withstand high temperatures and resist abrasion better than standard rubber components. This durability is essential for vehicles operating in harsh environments or those equipped with upgraded suspension systems. Each mount is engineered to reduce harshness while enhancing overall vehicle control and service life.

• Direct replacement for factory front upper strut mounts
• Proprietary polyurethane material for superior durability and temperature resistance
• Engineered to improve steering and braking response
• Designed, tested, and manufactured in Australia
• Manufacturer Part Number: RS002
• Sold individually (ReadyStrut Caps)
• 3-year manufacturer warranty

The Skunk2 Black Series Rear Upper Strut Tower Bar is engineered to increase chassis rigidity and improve handling performance for select 1992-2001 Honda Civic, Civic del Sol, and Acura Integra models. By tying the vehicle's upper shock towers together, this bar reduces chassis flex during cornering and high-load maneuvers, maintaining more consistent suspension geometry for a more predictable driving experience.

Constructed from lightweight and high-strength 6061 aluminum, the bar offers a superior strength-to-weight ratio. Each unit is finished in Skunk2's signature Black Series hard-anodized coating for durability and corrosion resistance. The bar includes CNC-machined hard-anodized aluminum brackets and a genuine Skunk2 nameplate for a clean, professional appearance in the trunk or cargo area.

• Manufactured from ultra-strong 6061 aluminum
• Hard-anodized Black Series finish for long-lasting protection
• Reduces chassis flex to improve steering response and handling
• Precision-fit hard-anodized aluminum mounting brackets
• Includes Skunk2 nameplate for authenticity
• Manufacturer Part Number: 522-05-0855

Fits 1992-2001 Acura Integra and Honda Civic/del Sol models.

The Skunk2 Rear Upper Strut Tower Bar is engineered to bridge the gap between your vehicle's rear shock towers, significantly increasing chassis rigidity and reducing flex during hard cornering. By tying the upper suspension points together, this bar ensures more consistent suspension geometry and improved handling performance for both street and track applications.

Constructed from lightweight yet ultra-strong 6061 aluminum, this bar offers an exceptional strength-to-weight ratio. Each unit features a high-luster polished finish, durable hard-anodized aluminum mounting brackets, and a genuine Skunk2 nameplate to verify its authenticity and quality.

• Manufactured from premium 6061 aluminum for maximum rigidity and weight savings
• Fully polished main bar with hard-anodized mounting brackets
• Direct-fit design mounts to factory rear upper suspension points
• Reduces chassis flex to improve steering response and stability
• Part Number: 522-05-0850

Improve chassis rigidity and handling response with the Skunk2 Black Series Front Upper Strut Tower Bar. Designed to tie the vehicle's upper shock towers together, this bar reduces chassis flex during hard cornering to maintain proper suspension geometry and predictable steering feedback.

This strut tower bar is engineered for enthusiasts who demand performance without unnecessary weight. Each bar is constructed from high-strength 6061 aluminum, offering a superior strength-to-weight ratio. The signature Black Series finish provides a sleek, understated engine bay appearance, while the hard-anodized aluminum brackets ensure a secure, corrosion-resistant mount to factory hardware points.

• Fits 1992-2001 Honda Civic, Civic del Sol, and Acura Integra (select trims)
• Manufactured from ultra-strong and lightweight 6061 aluminum
• Coated in Skunk2 signature Black Series finish
• Features hard-anodized aluminum mounting brackets
• Includes authentic Skunk2 nameplate
• Manufacturer Part Number: 522-05-0845

Fits 2023-2024 Honda Civic Type R.

The Seibon Carbon Fiber Front Strut Tower Brace (SB23HDCVR-F) is designed to increase chassis rigidity and improve handling precision. By physically linking the front strut towers, this brace minimizes chassis deflection and tower flex during high-load cornering, ensuring the suspension geometry remains consistent for better tire contact and steering feedback.

• Manufactured from high-grade carbon fiber for maximum stiffness with minimal weight
• High-gloss clear coat finish provides UV protection and heat resistance
• Reinforces the front subframe to reduce structural torsion under performance driving
• Direct bolt-on fitment to factory mounting locations for a straightforward installation
• Manufacturer Part Number: SB23HDCVR-F

Beyond the functional performance gains, the Seibon strut brace provides a premium, race-ready appearance to the FL5 engine bay, making it an essential upgrade for both track enthusiasts and show builds.

Fits 2022-2026 Subaru WRX models.

The PERRIN Carbon Fiber Strut Tower Brace is engineered to increase chassis rigidity by bracing the front strut towers together. This reduction in chassis flex helps maintain consistent suspension geometry during hard cornering, resulting in sharper steering response and improved driver feedback. By reinforcing the front end, this brace ensures the tires stay flatter on the pavement for better grip.

Constructed from high-strength carbon fiber, this brace provides exceptional stiffness while adding minimal weight to the front of the vehicle. It features a direct bolt-on design that utilizes factory mounting points for a straightforward installation without the need for drilling or permanent modifications.

• Material: High-modulus genuine carbon fiber
• Hardware: Precision-machined mounting brackets
• Installation: Direct bolt-on to factory strut towers
• Benefits: Reduced chassis deflection and improved turn-in precision
• Manufacturer Part Number: PSP-SUS-072CF

Fits 2008-2021 Subaru WRX and WRX STI.

The PERRIN Carbon Fiber Front Strut Tower Brace increases chassis rigidity by tying the front strut towers together, preventing the engine bay from flexing under heavy cornering loads. By reducing this deflection, your suspension is able to maintain its intended geometry, resulting in more consistent tire contact and sharper, more predictable steering response during spirited driving or track use.

• High-strength, lightweight carbon fiber bar construction for maximum stiffness
• Reduces chassis flex to improve turn-in and overall handling precision
• Installs directly to factory strut tower mounting points for a secure fit
• Designed to clear standard engine components and intake systems
• Manufacturer Part Number: PSP-SUS-071CF

Fits 2013-2026 Subaru BRZ, Toyota GR86, Toyota 86, and Scion FR-S models.

The PERRIN Front Strut Brace improves chassis rigidity by tying the front strut towers together, significantly reducing tower flex during hard cornering. By minimizing this movement, the suspension maintains its intended geometry, providing more precise steering response and better feedback through the steering wheel.

Engineered to clear factory engine components, this brace is built for long-term durability and features a vibrant red powder-coated finish that protects against corrosion while adding a high-performance look to your engine bay. It utilizes factory mounting points for a straightforward installation that does not require drilling or permanent modification.

• Reduces chassis flex and strut tower deflection for improved handling
• Enhances steering precision and driver feedback
• Durable high-strength construction with a red powder-coat finish
• Bolts directly to factory mounting points for easy installation
• Manufacturer Part Number: PSP-SUS-066RD

Fits 2013-2026 Subaru BRZ, Toyota GR86, 86, and Scion FR-S.

The PERRIN Front Strut Brace is engineered to increase chassis rigidity and sharpen steering response by linking the front strut towers together. During hard cornering, the strut towers move independently; this brace eliminates that flex, ensuring your suspension geometry remains consistent. This results in more predictable handling and improved tire contact with the road surface.

• Reduces front-end chassis flex for more precise turn-in and feedback
• Neon yellow powder-coated finish for maximum durability and engine bay styling
• Rigid construction bridges the engine bay to stabilize suspension mounting points
• Simple bolt-on installation using factory mounting locations
• Manufacturer Part Number: PSP-SUS-066NY

Fits 2013-2025 Subaru BRZ, Toyota 86, Toyota GR86, and Scion FR-S.

The PERRIN Front Strut Tower Brace increases chassis rigidity by mechanically linking the front strut towers. This reinforcement effectively reduces chassis flex during aggressive cornering and over uneven surfaces, resulting in sharper steering response and improved driver feedback. By maintaining more consistent suspension geometry under load, this brace helps optimize tire contact patches for better handling performance.

• Direct bolt-on design for a precise fit on the ZC6, ZN6, and ZN8/ZD8 platforms
• Rigid construction reduces front-end deflection for more predictable turn-in
• Durable Hyper Pink powder coat finish protects against corrosion and engine bay heat
• Installs quickly using factory mounting points with no permanent modifications required
• Manufacturer Part Number: PSP-SUS-066HP

Fits 2013-2025 Subaru BRZ, Toyota 86/GR86, and Scion FR-S.

The PERRIN Carbon Fiber Front Strut Brace is designed to stiffen the front chassis of your ZN6/ZD8 platform by bridging the strut towers. This reduction in chassis flex helps maintain consistent suspension geometry during high-load cornering, providing more precise steering feedback and improved turn-in response. Built with high-modulus carbon fiber and CNC-machined mounting feet, it offers an optimal balance of structural rigidity and weight savings.

• Chassis Rigidity: Minimizes strut tower deflection to keep the front tires planted during aggressive driving.
• Carbon Fiber Construction: Features a lightweight, high-strength carbon fiber bar with a glossy finish for a performance-focused engine bay aesthetic.
• Direct Fitment: Bolts directly to factory mounting points for a straightforward installation with no drilling required.
• Durable Hardware: Equipped with robust mounting brackets designed to withstand the stress of track and spirited street use.
• Manufacturer Part Number: PSP-SUS-066CF

Fits 2013-2026 Subaru BRZ, Toyota 86/GR86, and Scion FR-S models.

The PERRIN Front Strut Brace (PSP-SUS-066BK) is designed to increase chassis rigidity by bracing the front strut towers together. This reduction in chassis flex during hard cornering ensures your suspension maintains its intended geometry, resulting in more precise steering response and improved feedback through the wheel. Its low-profile design provides ample clearance for various engine bay configurations while adding a functional, performance-oriented aesthetic.

• Enhanced Handling: Ties the strut towers together to minimize flex and improve steering precision.
• Durable Finish: Features a high-quality black powder-coated finish for superior corrosion resistance and a clean look.
• Direct Fit: Engineered to bolt directly to factory mounting locations for a straightforward installation.
• MPN: PSP-SUS-066BK

Fits 2022-2026 Subaru WRX models.

The PERRIN Front Strut Brace addresses chassis flex by tying the front strut towers together, providing a more rigid structure for the suspension to work against. By reducing the outward lean of the strut towers during hard cornering, this brace helps maintain consistent alignment geometry, resulting in sharper turn-in and improved steering precision for the VB chassis.

• Increases front-end rigidity for better handling and driver feedback
• Durable red powder-coated finish resists corrosion and adds a custom look to the engine bay
• Slim design ensures clearance for factory engine components and wiring
• Direct bolt-on installation to factory mounting points with no drilling required
• Manufacturer Part Number: PSP-SUS-061RD

Fits 2022-2026 Subaru WRX models.

The PERRIN Front Strut Tower Brace enhances chassis rigidity and steering precision by bridging the gap between the front strut towers. Under heavy cornering loads, the vehicle's strut towers can flex, which alters suspension geometry and degrades handling predictability. This brace locks the towers together, ensuring the suspension remains stable and responsive.

Built to withstand the rigors of spirited driving, this brace features a robust design that maintains clearance for factory engine components. The PSP-SUS-061NY is finished in a high-visibility Neon Yellow powder coat, providing long-lasting corrosion resistance and a striking aesthetic under the hood.

• Reduces chassis flex for sharper, more consistent steering response
• Improves handling feel and feedback during high-load cornering
• Durable Neon Yellow powder-coated finish for heat and weather resistance
• Direct bolt-on installation to factory mounting points
• Manufacturer Part Number: PSP-SUS-061NY

Fits 2022-2026 Subaru WRX.

The PERRIN Front Strut Tower Brace improves the handling and stability of your vehicle by increasing chassis rigidity. By tying the strut towers together, this brace reduces tower flex during hard cornering, resulting in more precise steering response and a more predictable, planted feel on the road or track.

• Increases chassis stiffness and reduces front-end flex
• Enhances steering precision and feedback
• Durable Hyper Pink powder coat finish for long-lasting corrosion resistance
• Simple bolt-on installation to factory mounting points; no drilling required
• Manufacturer Part Number: PSP-SUS-061HP

Fits 2022-2026 Subaru WRX models.

The PERRIN Front Strut Tower Brace improves chassis rigidity by tying the front strut towers together, preventing the suspension geometry from shifting under heavy cornering loads. By reducing chassis flex, this brace enhances steering precision and provides a more predictable, planted feel during spirited driving or track sessions.

• Precision Engineering: Features CNC-machined billet aluminum feet for a precise fit and maximum structural integrity.
• Durable Construction: The rigid bar is finished in a heavy-duty black powder coat to resist corrosion and engine bay heat.
• Installation: This is a direct bolt-on component that installs onto factory mounting points with basic hand tools.
• Manufacturer Part Number: PSP-SUS-061BK

Fits 2015-2020 Subaru WRX STI models including Base, Launch Edition, Limited, and Series.HyperBlue.

The PERRIN Front Strut Tower Brace is designed to improve chassis rigidity by tying the tops of the strut towers together. By reinforcing this critical area, the brace reduces tower flex during hard cornering, ensuring more consistent suspension geometry and sharper steering response. This is a direct bolt-on upgrade that installs onto the factory mounting points without modification.

• Manufacturer Part Number: PSP-SUS-056RD
• Finish: Red Powder Coat
• Enhances steering precision and handling feel
• Reduces front-end chassis flex under load
• Durable construction for long-term performance

Fits select 2005-2018 Subaru WRX, STI, Impreza, Forester, Crosstrek, and Legacy models.

The PERRIN Front Strut Tower Bar increases chassis rigidity by bridging the gap between your front strut towers. By tying the towers together, this bar reduces flex during hard cornering, resulting in more predictable handling and sharpened steering response. It is a critical upgrade for drivers looking to maintain proper suspension alignment geometry under load and improve the overall feedback of their Subaru's front end.

• Reduced Chassis Flex: Minimizes tower deflection for better suspension performance during aggressive driving.
• Improved Handling: Enhances turn-in precision and provides more consistent steering feedback.
• Durable Finish: Features a vibrant yellow powder-coated finish for long-term corrosion resistance and engine bay aesthetics.
• Direct Fitment: Engineered to bolt directly to factory mounting points for a straightforward installation process.
• Manufacturer Part Number: PSP-SUS-056NY