Fits select 1978-1987 Buick Regal, Chevrolet Malibu, Oldsmobile Cutlass, and Pontiac Grand Prix.

Improve launching capability and eliminate wheel hop in your G-body with the BMR Suspension Rear Suspension Kit. Factory stamped steel control arms rely on soft rubber bushings that deflect under load, absorbing power and compromising geometry. This comprehensive kit (RSK028H) replaces those weak points with heavy-duty DOM steel tubing and high-durometer polyurethane bushings for consistent cornering and better traction.

The kit features on-car adjustable upper control arms, allowing for precise pinion angle tuning to optimize drivetrain geometry. The non-adjustable lower control arms provide a rigid foundation, while the included reinforcement braces reduce frame deflection during hard launches. All components are finished in a durable Black Hammertone powder coat for long-lasting corrosion resistance.

• Lower Control Arms: 1.50-inch diameter, 0.120-inch wall DOM steel tubing
• Upper Control Arms: 1.25-inch diameter, 0.120-inch wall DOM steel tubing
• Reinforcement Braces: 1.0-inch diameter, 0.156-inch wall steel tubing
• Bushings: 95-durometer greasable polyurethane with internal fluting to retain lubricant
• Adjuster: CNC-machined chrome-moly steel with rolled threads
• Finish: Black Hammertone powder coat
• Manufacturer Part Number: RSK028H

Fits select 1968-1972 Buick Skylark, Chevrolet Chevelle, El Camino, Monte Carlo, Oldsmobile 442, Cutlass, and Pontiac GTO/LeMans.

Upgrade your classic GM A-Body’s traction and chassis rigidity with the BMR Suspension RSK017H Non-Adjustable Rear Suspension Kit. This package replaces the weak factory stamped-steel arms with heavy-duty boxed and tubular components, significantly reducing suspension deflection and wheel hop. The included reinforcement braces are engineered to strengthen the upper control arm frame mounts by tying them directly to the lower mounts, preventing frame fatigue and providing a more responsive driving experience during aggressive launches or hard cornering.

Designed for street performance, drag racing, and road course applications, this kit utilizes BMR's proprietary polyurethane bushings. These bushings are firm enough to stand up to high compression loads yet compliant enough to absorb road noise, vibration, and harshness (NVH), ensuring your ride quality remains street-friendly. The Black Hammertone powdercoat finish provides long-lasting protection against corrosion and debris.

• Replaces factory stamped-steel arms to eliminate flex and improve repeatability
• Reinforcement braces strengthen upper control arm frame mounts
• High-durometer polyurethane bushings handle high loads with excellent articulation
• Heavy-duty construction suitable for street, drag, and road race environments
• Durable Black Hammertone powdercoat finish
• Estimated installation time: 3-4 hours
• Manufacturer Part Number: RSK017H
• Proudly Made in the U.S.A.

Note: Control arm hardware kit RH002 is highly recommended for installation.

Fits select 1964-1967 Buick Gran Sport and Skylark, Chevrolet Chevelle and El Camino, Oldsmobile 442 and Cutlass, and Pontiac GTO and LeMans.

The BMR Suspension RSK002H Rear Suspension Kit is designed to eliminate the flex and wheel hop associated with factory stamped-steel control arms and soft rubber bushings. This kit provides a significant upgrade in rigidity and cornering consistency for street performance, drag racing, and road racing applications. By replacing OE components with heavy-duty steel tubing and high-durometer bushings, you ensure more efficient power transfer to the tires.

• Lower control arms: 1.5-inch x 3-inch rectangular steel tubing with 0.120-inch wall thickness.
• Upper control arms: 1.625-inch diameter DOM steel tubing with 0.120-inch wall thickness.
• 95-durometer greasable polyurethane bushings for a responsive, solid feel.
• Internally fluted bushings direct grease to the thrust surface for quiet, reliable operation.
• Eliminates control arm deflection to improve launch repeatability and handling.
• Durable Black Hammertone powder coat finish.
• Manufacturer Part Number: RSK002H

Fits select 2003-2024 Toyota 4Runner, Tacoma, FJ Cruiser, and Lexus GX460/GX470.

The Bilstein B8 8112 (ZoneControl CR) 700lb Spring Kit is engineered to work in tandem with the advanced damping characteristics of the ZoneControl CR coilover system. This kit is specifically designed for vehicles carrying significant front-end weight, such as heavy-duty steel bumpers, winches, or auxiliary battery setups. By utilizing a 700lb spring rate, these coils prevent excessive sagging and preserve suspension travel, ensuring your rig maintains proper ride height and handling dynamics during technical off-road maneuvers.

• Specifically optimized for use with Bilstein B8 8112 ZoneControl CR shock absorbers
• Heavy-duty 700lb spring rate supports aftermarket armor and equipment
• Direct fit for vehicle-specific coilover applications
• Maintains critical ride height and suspension geometry
• Manufacturer Part Number: 53-332837

Fits 2024-2026 Toyota Land Cruiser and 2025-2026 Toyota 4Runner models. This Bilstein B8 6112 suspension kit is engineered to increase ground clearance, accommodate larger tires, and provide additional wheel travel for demanding off-road environments.

The B8 6112 system features a massive 60mm (2.65-inch OD) shock body that provides significantly higher oil capacity compared to factory units. This improves heat dissipation and ensures consistent damping performance over rough terrain. The 60mm digressive piston is tuned specifically for these Toyota platforms, delivering a balance of on-road composure and off-road control. For height adjustment, the zinc-plated shock bodies feature multiple snap-ring grooves, allowing for 0 to 2.75 inches of front lift depending on your specific vehicle configuration.

• Manufacturer Part Number: 47-347472
• Shock Diameter: 60mm (2.65-inch OD)
• Piston Type: 60mm Digressive for improved ride comfort and control
• Adjustability: Multiple snap-ring grooves for 0-2.75" of front lift
• Construction: Zinc-plated shock bodies with billet aluminum spring seats
• Kit Includes: (2) 60mm shock absorbers, (2) custom-matched cold-wound coil springs, and (2) spring seats

Fits 2023-2026 Chevrolet Colorado LT, WT, and Z71 models (Non-Trail Boss only).

The Bilstein B8 6112 leveling kit is engineered for drivers looking to increase ground clearance, accommodate larger tires, and improve off-road wheel travel without sacrificing on-road composure. This comprehensive front suspension solution replaces the factory strut assembly with a high-performance 60mm monotube shock and a custom-matched cold-wound coil spring. The large 2.65-inch outer diameter body provides significantly increased oil capacity compared to OE units, ensuring superior cooling and consistent damping during extended use on rough terrain.

Constructed with a 60mm digressive piston, the B8 6112 system reacts instantly to surface changes, providing firm control over large obstacles while maintaining a comfortable ride on the pavement. The kit features multiple snap-ring grooves on the shock body, allowing for adjustable spring seat positions to achieve between 0 and 2.5 inches of front lift, depending on your specific load and desired stance.

• 60mm digressive piston for improved ride comfort and high-speed control
• Large 2.65-inch OD body for increased thermal capacity and durability
• Vehicle-specific tuning for 2023-2026 Colorado WT, LT, and Z71 trims
• Billet aluminum spring seats for precision fitment and strength
• Kit includes (2) 60mm shock absorbers, (2) coil springs, and (2) spring seats
• Manufacturer Part Number: 47-336674

Fits 2022-2026 Toyota Tundra and 2023-2026 Toyota Sequoia models. This Bilstein B8 6112 leveling kit is engineered to provide increased ground clearance, accommodate larger tire sizes, and improve wheel travel for both on-road stability and off-road performance.

Built around a massive 60mm shock body with a 2.65-inch outer diameter, this kit offers significantly increased oil capacity to manage heat and maintain damping consistency during hard use. The 60mm digressive piston reacts to terrain changes instantly, providing a firm, controlled ride without sacrificing comfort. The height-adjustable design utilizes multiple snap-ring grooves in the shock body, allowing for various spring seat positions to achieve between 0 and 3.1 inches of front lift depending on the vehicle configuration.

• Includes (2) 60mm shock absorbers and (2) custom-matched cold wound coil springs
• Includes (2) billet aluminum spring seats for precision fitment
• Large 60mm digressive piston improves ride comfort and high-speed control
• Vehicle-specific tuning for the 2022+ Tundra and 2023+ Sequoia chassis
• Zinc-plated finish for long-term corrosion resistance
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: 47-329232

Fits 2014-2019 Chevrolet Silverado 1500, Silverado 1500 LD, GMC Sierra 1500, and Sierra 1500 Limited.

The Bilstein B8 6112 leveling kit is a heavy-duty suspension solution engineered to increase ground clearance, accommodate larger tires, and provide additional wheel travel. This front-specific kit (MPN: 47-325753) features a large 60mm digressive piston and a 2.65-inch outer diameter body, offering significantly more oil capacity and cooling efficiency than standard shocks. Multiple snap-ring grooves in the body allow for adjustable spring seat positions, providing 0 to 2.75 inches of front lift depending on your specific vehicle application.

• Large 60mm shock body increases oil capacity and durability for sustained off-road use
• 60mm digressive piston improves ride comfort and high-speed damping control
• Cold-wound coil springs are custom-matched to the 60mm shocks for optimized vehicle dynamics
• Adjustable snap-ring grooves allow for front lift heights from 0 to 2.75 inches
• Billet aluminum spring seats ensure a precise, secure fitment
• Kit includes: (2) 60mm shock absorbers, (2) coil springs, and (2) billet spring seats

Vehicle Fitment:

Fits select 2021-2025 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, First Edition, Heritage, Outer Banks, and Wildtrak.

The Bilstein B8 6112 (47-325593) suspension kit is a heavy-duty, direct-fit upgrade designed to increase wheel travel and damping control for the Ford Bronco. Engineered for the rear of the vehicle, this kit replaces factory components with high-volume 60mm shock absorbers and custom-matched cold-wound springs to improve off-road capability and on-road stability. The large 2.65-inch outer diameter (OD) body significantly increases oil capacity, ensuring superior cooling and consistent performance during extended trail sessions.

Equipped with a 60mm digressive piston, this kit provides precise damping across varying terrain, absorbing high-speed impacts while maintaining a controlled ride on pavement. Every kit is vehicle-specifically tuned to account for the Bronco's weight and suspension geometry, allowing for larger tire fitment and increased ground clearance.

• Large 60mm Shock Body: Increases oil volume for improved cooling and long-term durability under heavy use.
• 60mm Digressive Piston: Improves ride comfort and provides superior damping control over rough terrain.
• Matched Components: Includes (2) 60mm shock absorbers, (2) custom-matched cold-wound coil springs, and (2) billet aluminum spring seats.
• Precision Engineering: Features multiple snap-ring grooves in the body for adjustable spring seat positioning.
• MPN: 47-325593

Fits 2021-2025 Ford Bronco 4WD 2-Door models including Badlands, Base, Big Bend, Black Diamond, First Edition, Heritage, and Outer Banks.

The Bilstein B8 6112 leveling kit is engineered for drivers seeking increased ground clearance, additional wheel travel, and the capacity for larger tires. This kit features a massive 60mm (2.65-inch) outer diameter body, providing significantly more oil capacity and cooling compared to factory units. This increased volume ensures consistent damping performance during prolonged off-road use while the 60mm digressive piston provides superior control over rough terrain without sacrificing on-road comfort.

The B8 6112 utilizes a multiple snap-ring groove design on the shock body, allowing for various spring seat positions to achieve between 0.8 and 3.6 inches of front lift. This system replaces the factory front strut assembly with a precision-tuned combination of high-performance shocks and custom-matched cold-wound coil springs.

• Large 60mm body for maximum oil capacity and cooling durability
• 60mm digressive piston tuned specifically for the Bronco chassis
• Multiple snap-ring grooves for adjustable ride height (0.8" to 3.6" lift)
• Billet aluminum spring seats for high-strength durability
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: 47-325586

Includes: (2) 60mm shock absorbers, (2) custom-matched cold-wound coil springs, and (2) billet aluminum spring seats.

Fits 2021-2025 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, and Wildtrak).

The Bilstein B8 6112 suspension kit is engineered for Bronco owners demanding increased ground clearance and superior damping control. This rear-specific kit features massive 60mm shock absorbers paired with custom-matched, cold-wound coil springs to optimize wheel travel and heat dissipation. By utilizing a large 2.65-inch outer diameter body and 60mm digressive pistons, this system delivers precise handling on technical trails while maintaining refined on-road ride quality.

• Large 60mm monotube body increases oil capacity for superior cooling and long-term durability.
• 60mm digressive piston provides vehicle-specific tuning for improved terrain control and comfort.
• Snap-ring grooves in the body allow for precise spring seat positioning.
• Constructed with custom matched cold-wound coil springs and billet aluminum spring seats.
• Direct-fit installation to factory mounting points.
• Manufacturer Part Number: 47-314009

This comprehensive kit includes (2) 60mm shock absorbers, (2) custom matched coil springs, and (2) billet aluminum spring seats.

Fits 2021-2025 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, and Wildtrak.

The Bilstein B8 6112 leveling kit is an engineered suspension solution designed to increase ground clearance, provide room for larger wheel and tire packages, and enhance wheel travel. This front-end kit utilizes a large 60mm (2.65-inch OD) body that provides increased oil capacity for superior cooling and consistent damping performance during long-term off-road use. The 60mm digressive piston is specifically tuned for the Ford Bronco chassis to improve ride comfort and control across both highway and rough terrain.

This kit features multiple snap-ring grooves in the shock body, allowing for adjustable spring seat positions to achieve between 0 and 2.75 inches of front lift. Each kit is a direct-fit solution that replaces the factory front struts with heavy-duty components designed for high-performance applications. Part number 47-313996 includes all necessary hardware for a complete front axle upgrade.

• 60mm shock body for increased heat dissipation and durability
• Digressive valving for optimized on-road handling and off-road stability
• Multiple snap-ring grooves provide 0-2.75 inches of front leveling lift
• Custom-matched cold wound coil springs and billet aluminum spring seats
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: 47-313996

Fits select 2010-2024 Toyota 4Runner, 2010-2014 Toyota FJ Cruiser, and 2010-2023 Lexus GX460.

The Bilstein B8 6112 Heavy Load suspension kit is engineered to provide increased ground clearance, additional wheel travel, and the capacity to run larger tire and wheel combinations. This leveling kit utilizes multiple snap-ring grooves in the shock body to offer adjustable spring seat positions, allowing for 0 to 2.75 inches of front lift depending on your specific application and load requirements.

Designed for off-road durability and on-road stability, the kit features large 60mm shock bodies with an increased oil capacity for superior cooling. The 60mm digressive pistons provide precise damping control over rough terrain while maintaining a comfortable ride. Each kit is vehicle-specific to ensure optimal performance and a direct-fit installation using factory mounting points.

• Manufacturer Part Number: 47-311039
• Shock Body Diameter: 2.65-inch OD / 60mm
• Piston Type: 60mm Digressive
• Lift Height: 0-2.75 inches (application dependent)
• Spring Design: Custom cold-wound coil springs
• Included Components: (2) 60mm shocks, (2) coil springs, and (2) billet aluminum spring seats

Fits 2007-2022 Toyota Sequoia and Tundra models, including SR5, Limited, Platinum, and TRD Pro trims.

The Bilstein B8 6112 leveling kit is engineered to provide increased ground clearance, allow for larger tire fitment, and enhance wheel travel for off-road performance while maintaining on-road composure. Built around a large 60mm (2.65-inch OD) shock body, this kit offers significantly higher oil capacity and surface area compared to stock units, ensuring superior heat dissipation and long-term durability under demanding conditions.

Each kit features vehicle-specific tuning with a 60mm digressive piston that improves ride comfort and control over rough terrain. The shock bodies are designed with multiple snap-ring grooves, allowing for adjustable spring seat positions to achieve between 0 and 2.75 inches of front lift (depending on application). This direct-fit system replaces the factory front strut assembly using matched cold-wound coil springs for a precise, balanced ride.

• 60mm digressive piston for improved damping control and terrain feedback
• Large 2.65-inch outer diameter shock body for maximum cooling and oil capacity
• Multiple snap-ring grooves provide adjustable lift heights from 0 to 2.75 inches
• Includes two (2) custom cold-wound coil springs and two (2) billet aluminum spring seats
• Designed as a direct-fit solution for easy installation
• Manufacturer Part Number: 47-310971

Fits 1996-2004 Toyota Tacoma models including Base, Limited, Pre Runner, and SR5.

The Bilstein B8 6112 leveling kit is the definitive suspension upgrade for first-generation Tacoma owners seeking increased ground clearance and improved off-road performance. Engineered with a massive 60mm (2.65in OD) shock body, this kit provides significantly higher oil capacity compared to standard shocks, effectively reducing heat fade during sustained off-road use. The 60mm digressive piston is precision-tuned to provide a firm, controlled ride on the pavement while smoothing out harsh terrain in the dirt.

This kit features a series of snap-ring grooves on the shock body, allowing for adjustable spring seat positions to achieve between 0 and 2.75 inches of front lift. This design enables the use of larger tire packages and increases wheel travel without the need for spacers. Each kit is a direct-fit solution that bolts to factory mounting points, ensuring a straightforward installation process.

• 60mm shock bodies for enhanced cooling and long-term durability
• 60mm digressive pistons for optimized damping control
• Adjustable lift heights from 0-2.75 inches via multiple snap-ring grooves
• Custom-matched cold-wound coil springs for consistent performance
• Billet aluminum spring seats for high-strength support
• Includes (2) 60mm shock absorbers, (2) coil springs, and (2) spring seats
• Manufacturer Part Number: 47-310896

Fits 1996-2002 Toyota 4Runner (Base, Limited, and SR5).

The Bilstein B8 6112 leveling kit is engineered to increase front-end ground clearance, accommodate larger wheel and tire packages, and provide additional wheel travel for off-road use. This comprehensive kit features a large 2.65-inch (68mm) outer diameter body and a 60mm digressive piston, providing superior damping control and oil capacity for consistent performance across rough terrain and on-road transit.

The shock bodies utilize a multiple snap-ring groove system to allow for various spring seat positions, offering a front lift height range of 0 to 2.75 inches. Each kit includes custom-matched cold-wound coil springs and CNC-machined billet aluminum spring seats specifically tuned for the 3rd Gen 4Runner platform to ensure optimal ride quality and handling.

• 60mm digressive piston improves damping control and ride comfort
• Large 2.65-in OD body increases oil capacity for better cooling and durability
• Adjustable snap-ring grooves provide 0-2.75 inches of front lift
• Includes (2) 60mm shock absorbers, (2) custom cold-wound springs, and (2) billet aluminum spring seats
• Direct-fit installation into factory mounting locations
• Manufacturer Part Number: 47-310872

Fits select 2007-2014 Chevrolet Avalanche, Silverado 1500, and Tahoe, and GMC Sierra 1500 and Yukon.

The Bilstein B8 6112 leveling kit is engineered for drivers seeking increased ground clearance, room for larger tires, and enhanced wheel travel without sacrificing on-road handling. This system replaces the factory front struts with a high-performance setup designed for the specific weight and geometry of GM 1500-series trucks and SUVs. Featuring a massive 2.65-inch outer diameter body and a 60mm digressive piston, these shocks provide superior damping control and increased oil capacity to resist heat fade during demanding off-road use.

The kit includes multiple snap-ring grooves in the shock body, allowing for adjustable spring seat positions that provide between 0 and 2.75 inches of front lift (depending on the specific application). This allows you to level your vehicle's stance or accommodate heavier aftermarket accessories while maintaining the legendary Bilstein ride quality.

• Adjustable Lift: Multiple snap-ring grooves provide 0-2.75 inches of front lift.
• Advanced Damping: 60mm digressive pistons improve ride comfort and control over rough terrain.
• Heavy-Duty Build: Large 60mm bodies increase oil capacity for better cooling and long-term durability.
• Custom Matched: Includes two cold-wound coil springs specifically tuned for this shock and vehicle combination.
• Quality Materials: Includes billet aluminum spring seats for precise fitment and durability.

• Manufacturer Part Number: 47-310858
• Body Diameter: 2.65-in OD
• Internal Piston: 60mm Digressive
• Front Lift Height: 0-2.75"
• Included Hardware: (2) 60mm Shock Absorbers, (2) Coil Springs, (2) Billet Aluminum Spring Seats

Fits select 2014-2020 Chevrolet Silverado 1500 and Tahoe, and GMC Sierra 1500 and Yukon models.

The Bilstein B8 6112 leveling kit is engineered for drivers seeking increased ground clearance, larger tire fitment, and improved suspension travel. This complete front-end solution features a large 60mm shock body (2.65-inch OD) to maximize oil capacity and cooling, ensuring consistent damping performance during extended off-road use. The 60mm digressive piston is specifically tuned for each vehicle to provide superior bottom-out resistance and controlled handling on varied terrain.

Constructed with multiple snap-ring grooves in the shock body, this kit allows for adjustable spring seat positions, providing between 0 to 2.75 inches of front lift depending on your specific vehicle configuration. The kit includes custom-matched, cold-wound coil springs and durable billet aluminum spring seats to ensure a precise fit and long-term reliability under heavy use.

• 60mm digressive piston for enhanced on-road comfort and off-road control
• Large 2.65-inch OD body increases oil volume for better heat dissipation
• Adjustable front lift height from 0 to 2.75 inches via snap-ring grooves
• Includes (2) 60mm shock absorbers, (2) cold-wound coil springs, and (2) billet aluminum spring seats
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: 47-310834

Fits 2004-2008 Ford F-150 (FX4, Lariat, King Ranch, XL, XLT) and 2006-2008 Lincoln Mark LT 4WD models.

The Bilstein B8 6112 leveling kit is a comprehensive front suspension solution designed to increase ground clearance and wheel travel while accommodating larger tires. Built around a massive 60mm monotube shock body with a 2.65-inch outer diameter, this kit provides significantly higher oil capacity and better heat dissipation than standard factory dampers. The 60mm digressive piston is tuned specifically for these platforms to deliver superior damping control and ride comfort across both highway and off-road terrain.

This kit features multiple snap-ring grooves in the shock body, allowing for adjustable spring seat positions to provide 0 to 2.75 inches of front lift. The package includes custom-matched cold-wound coil springs and CNC-machined billet aluminum spring seats for a precise, bolt-on installation.

• 60mm shock body for increased durability and cooling
• Large 60mm digressive piston for optimized damping
• Adjustable front lift height from 0 to 2.75 inches
• Includes (2) shocks, (2) cold-wound coil springs, and (2) billet aluminum spring seats
• Vehicle-specific tuning for 4WD F-150 and Mark LT applications
• Manufacturer Part Number: 47-310780

Fits 2010-2024 Toyota 4Runner, 2010-2014 Toyota FJ Cruiser, and 2010-2023 Lexus GX460.

The Bilstein B8 6112 front suspension kit is engineered for drivers looking to increase ground clearance, accommodate larger tires, and improve wheel travel. This leveling kit replaces the factory front struts with massive 60mm dampers paired with custom-matched cold-wound coil springs. The large 2.65-inch OD body provides significantly increased oil capacity and cooling for consistent performance during long-term off-road use.

Equipped with multiple snap-ring grooves in the shock body, this kit allows for adjustable spring seat positions, providing between 0 and 2.75 inches of front lift depending on the application. The 60mm digressive piston design is vehicle-specific, delivering the ideal balance of high-speed damping control for off-road terrain and a compliant ride for daily driving.

• Large 60mm shock body for maximum heat dissipation and durability
• 60mm digressive piston improves ride comfort and vehicle stability
• Adjustable snap-ring grooves for 0-2.75 inches of front lift
• Custom cold-wound coil springs matched to the 60mm dampers
• Billet aluminum spring seats for precision fitment
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: 47-310025
• Includes: (2) 60mm shock absorbers, (2) coil springs, and (2) spring seats

Fits 2019-2026 Chevrolet Silverado 1500 Custom/LT Trail Boss and GMC Sierra 1500 AT4.

The Bilstein B8 6112 leveling kit is engineered to improve ground clearance and wheel travel while maintaining superior damping control on and off the pavement. This front suspension system utilizes a massive 60mm digressive piston and a 2.65-inch outer diameter body, providing increased oil capacity and cooling for long-term durability under heavy use. Multiple snap-ring grooves in the shock body allow for adjustable spring seat positions, offering between 0 to 2.75 inches of front lift depending on your specific vehicle configuration.

• Large 60mm shock body for maximum heat dissipation and durability
• Digressive valving improves ride comfort and high-speed control over rough terrain
• Cold-wound, custom-matched coil springs for optimized load handling
• Billet aluminum spring seats for precise fitment and strength
• Direct-fit design bolts to factory mounting locations
• Includes (2) 60mm shock absorbers, (2) coil springs, and (2) spring seats
• Manufacturer Part Number: 47-309524

Fits 2019-2023 Ford Ranger Lariat, XL, and XLT.

The Bilstein B8 6112 leveling kit is engineered for drivers seeking increased ground clearance, room for larger tires, and superior wheel travel. This front suspension system utilizes a 60mm monotube shock body with a massive 2.65-inch outer diameter, providing significantly higher oil capacity and cooling efficiency compared to standard OE shocks. The large 60mm digressive piston provides exceptional damping control, balancing plush on-road comfort with the firm resistance needed for aggressive off-road terrain.

This kit features multiple snap-ring grooves on the shock body, allowing for adjustable spring seat positions to achieve between 0 to 2.75 inches of front lift (depending on application). Each kit is vehicle-specifically tuned and includes custom cold-wound coil springs and billet aluminum spring seats for a direct-fit installation onto your Ford Ranger.

• Manufacturer Part Number: 47-294301
• Large 60mm shock body for maximum oil capacity and heat dissipation
• 60mm digressive piston for improved ride comfort and control over rough terrain
• Adjustable front lift height: 0" to 2.75"
• Includes (2) 60mm shock absorbers, (2) custom cold-wound coil springs, and (2) billet aluminum spring seats
• Monotube gas pressure technology for consistent performance

Fits 2022-2026 Toyota Tundra 1794 Edition, Capstone, Limited, Platinum, SR, and SR5 models.

The Bilstein B8 8112 Black Hawk is a high-performance, 3-way adjustable coilover designed specifically for the front left position of the 2022-2026 Toyota Tundra. Engineered to handle everything from technical trails to daily commutes, this system utilizes ZoneControl CR technology to provide position-sensitive damping across three compression zones and two rebound zones. This multi-piston setup effectively eliminates harsh bottom-outs while maintaining a smooth ride over small-scale chatter and road irregularities.

• Precise Adjustment: Features clicker knobs for dual-speed compression adjustment (high and low speed) plus an adjustable internal hydraulic bump stop (JCO) to fine-tune bottom-out resistance.
• Superior Cooling: Large 2.65-inch OD aluminum shock body paired with a finned remote reservoir increases oil capacity and dissipates heat during high-frequency cycling.
• Ride Height Versatility: Provides a 1-inch to 2.25-inch lift range, allowing for improved ground clearance and accommodation of larger tire packages.

• Manufacturer Part Number: 41-332245
• Position: Front Left
• Body Diameter: 2.65in
• Material: Aluminum
• Technology: ZoneControl CR
• Adjustability: 3-Way (High/Low Compression, JCO)
• Lift Height: 1-2.25in

Fits select 2022-2026 Toyota Tundra 4WD models including SR, SR5, Limited, Platinum, 1794 Edition, and Capstone.

The Bilstein B8 8112 Black Hawk is a high-performance, 3-way adjustable coilover designed for the late-model Toyota Tundra. Engineered for both high-speed desert runs and controlled technical crawling, these coilovers utilize ZoneControl CR technology to provide position-sensitive damping. This system employs three independent pistons to manage three compression zones and two rebound zones, virtually eliminating harsh bottom-outs while maintaining a smooth ride over small chatter. The front right coilover (MPN 41-332238) features an adjustable internal hydraulic bump stop (JCO) and provides a lift range of 1 to 2.25 inches depending on the application.

• Large 2.65-inch OD aluminum shock body for superior heat dissipation
• Finned aluminum remote reservoir for increased oil capacity and enhanced cooling
• 3-way external damping adjustments: low-speed and high-speed compression plus adjustable JCO
• ZoneControl CR provides position-sensitive damping with 3 compression and 2 rebound zones
• Direct-fit bolt-on installation replaces factory front right shock and spring assembly
• Aerospace-grade materials and finishes for maximum durability in harsh environments

Fits 2007-2021 Toyota Tundra models across all trim levels including Base, SR, SR5, Limited, Platinum, 1794 Edition, Nightshade, Trail, and TRD Pro.

The Bilstein B8 8112 (ZoneControl CR DSA+) is a high-performance 2.65-inch body front right coilover shock engineered for demanding off-road conditions and refined street manners. Utilizing a sophisticated triple-piston design, this position-sensitive unit provides three stages of compression valving and two stages of rebound valving. This complex internal architecture delivers smooth compliance over small chatter while providing the necessary damping force to control large suspension inputs and bottom-out events.

Equipped with Dual Speed Adjustability (DSA+), the external clickers allow for precise independent tuning of both low-speed and high-speed compression. The integrated internal hydraulic bump stop (JCO) is also adjustable, providing a final layer of protection against harsh bottoming. The coilover features a threaded spring seat for ride height adjustments ranging from 0 to 3 inches, allowing you to level your Tundra or accommodate larger tire fitments.

• 60mm remote reservoir increases oil capacity for superior heat dissipation and consistent damping
• ZoneControl CR technology uses three independent pistons for specific position-sensitive damping zones
• Dual Speed Adjustment (DSA+) clickers for precise low and high-speed compression tuning
• Adjustable internal hydraulic bump stop (JCO) prevents metal-to-metal contact
• Includes a bolt-on anodized reservoir chassis mount for a secure, professional installation
• Zinc-plated 2.65-inch shock body for corrosion resistance and durability
• Manufacturer Part Number: 41-326091

Fits 2007-2021 Toyota Tundra models across all trims including SR5, Limited, Platinum, and TRD Pro. This Bilstein B8 8112 (ZoneControl CR) front right corner module is a high-performance, position-sensitive coilover designed to provide superior damping control on and off-road.

At the core of the B8 8112 is the revolutionary ZoneControl CR technology. This system utilizes a sophisticated triple-piston design to provide three stages of compression valving and two stages of rebound valving. The result is a suspension setup that maintains compliant ride comfort during daily street use while offering massive bottom-out resistance and control when encountering large suspension inputs or high-speed cycles.

Constructed with a 2.65-inch monotube body and a 60mm remote reservoir, this module ensures consistent performance by increasing oil capacity and improving heat dissipation. The threaded spring seat allows for precise ride height adjustments ranging from 0 to 3.8 inches depending on your specific setup and weight requirements.

• Series: B8 8112 (ZoneControl CR)
• MPN: 41-326039
• Position: Front Right
• Body Design: 2.65-inch smooth body with 60mm remote reservoir
• Adjustment: Threaded spring seat for 0-3.8" lift height
• Valving: 3 stages of compression and 2 stages of rebound
• Included Hardware: Bolt-on anodized reservoir chassis mount

Fits select 2007-2021 Toyota Tundra models, including SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

The Bilstein B8 8112 (ZoneControl CR) is a high-performance, position-sensitive front left coilover module designed to provide unparalleled ride quality and suspension control. Featuring a 2.65-inch diameter body and a 60mm remote reservoir, this unit is engineered for light trucks and SUVs that demand superior cooling and oil capacity during aggressive use. The ZoneControl CR technology utilizes a revolutionary triple piston design to provide three stages of compression valving and two stages of rebound valving, ensuring a smooth ride on the street while maintaining maximum bottom-out control off-road.

This coilover module includes a threaded spring seat allowing for ride height adjustability ranging from 0 to 3.8 inches, depending on your specific configuration. It comes complete with a bolt-on anodized reservoir chassis mount for a secure and clean installation. By replacing the factory strut with this monotube module, you gain precision-tuned damping specifically calibrated for the Tundra chassis.

• Manufacturer Part Number: 41-326022
• ZoneControl CR: Position-sensitive damping with 3 compression zones and 2 rebound zones
• Triple piston design for optimal comfort and large-input control
• 60mm remote reservoir for enhanced cooling and oil volume
• 2.65-inch diameter shock body
• Adjustable ride height: 0-3.8 inches
• Includes bolt-on anodized reservoir mounting hardware

Fits select 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser models.

The Bilstein B8 8112 (ZoneControl CR) is a high-performance, position-sensitive coilover module designed to deliver unparalleled control for light trucks and SUVs. This direct-fit, 2.65-inch body monotube shock features revolutionary ZoneControl CR technology, utilizing a triple-piston design to provide three stages of compression valving and two stages of rebound valving. This internal bypass system ensures a smooth, comfortable ride during daily driving while maintaining maximum control and bottom-out resistance during aggressive off-road suspension cycles.

This module includes a 60mm remote reservoir to significantly increase oil capacity and cooling efficiency, paired with a bolt-on anodized reservoir chassis mount for a secure installation. The threaded spring seat allows for precise ride height adjustability, ranging from 0 to 3.8 inches depending on your specific vehicle application.

• ZoneControl CR: Position-sensitive damping with 3 compression zones and 2 rebound zones.
• Triple Piston Design: Independent pistons for comfort and high-input control.
• Cooling: 60mm remote reservoir for improved heat dissipation.
• Construction: 2.65-inch monotube body with an anodized reservoir mount.
• Adjustability: Threaded spring seat for 0-3.8" ride height adjustment.
• Part Number: 41-324172

Fits 2005-2023 Toyota Tacoma (Base, Limited, Pre Runner, SR, SR5, Trail, TRD Off-Road, TRD Pro, and TRD Sport).

The Bilstein B8 8112 (ZoneControl CR DSA+) is a high-performance, 2.65-inch body position-sensitive coilover designed for elite off-road performance without compromising daily drivability. This front right assembly features a revolutionary triple-piston design, providing three stages of compression valving and two stages of rebound valving. With the Dual Speed Adjustability (DSA+) system, drivers can precisely tune low-speed and high-speed compression via clicker knobs to match specific terrain or load requirements.

Built to handle high-velocity suspension inputs, the B8 8112 includes an internal hydraulic bump stop (JCO) to prevent bottoming out. The threaded spring seat allows for adjustable ride height ranging from 0 to 3 inches, depending on your specific setup. To ensure consistent damping during hard use, it features a 60mm remote reservoir for increased oil capacity and superior cooling, secured by a bolt-on anodized chassis mount.

• Manufacturer Part Number: 41-319581
• Position: Front Right
• Adjustability: 3-way adjustable with Dual Speed Adjustment (DSA+)
• Damping: ZoneControl CR position-sensitive damping
• Body Diameter: 2.65-inch
• Reservoir: 60mm remote reservoir with bolt-on mount
• Lift Height: 0-3" adjustable threaded spring seat
• Internal Features: JCO (Internal Hydraulic Bump Stop) and triple-piston design

Fits 2005-2023 Toyota Tacoma (Base, Pre Runner, SR, SR5, Limited, Trail, TRD Off-Road, TRD Pro, and TRD Sport).

The Bilstein B8 8112 (ZoneControl CR DSA+) is a high-performance, position-sensitive coilover assembly designed for demanding off-road use while maintaining refined street manners. This 2.65-inch body shock features a revolutionary triple-piston design, providing three stages of compression valving and two stages of rebound valving. The Dual Speed Adjustability (DSA+) system allows for precise, independent tuning of high and low-speed compression via clicker knobs, alongside an adjustable JCO (Internal Hydraulic Bump Stop) to manage bottom-out forces during heavy suspension hits.

Built for durability and thermal stability, this coilover utilizes a 60mm remote reservoir for increased oil capacity and cooling. The threaded spring seat allows for ride height adjustments from 0 to 3 inches, depending on the application. Each unit includes a bolt-on anodized reservoir chassis mount for a secure, factory-style installation.

• Manufacturer Part Number: 41-319574
• 2.65-inch position-sensitive shock body
• 60mm remote reservoir for superior cooling and oil capacity
• ZoneControl CR technology with 3 compression zones and 2 rebound zones
• Dual Speed Adjustability (DSA+) for high and low-speed compression
• Adjustable JCO (Internal Hydraulic Bump Stop)
• 0-3 inch ride height adjustability via threaded spring seat
• Includes coil spring and anodized reservoir mounting hardware