Fits select 1966-1974 Dodge and Plymouth B-Body and E-Body vehicles, including Charger, Challenger, Coronet, Barracuda, Road Runner, and Satellite.

The QA1 Front Coil-Over Suspension Conversion System modernizes your classic Mopar by replacing the factory torsion bar setup with a high-performance coil-over design. This system significantly improves drivability and cornering while providing a modern steering feel. The included tubular K-member reduces front-end weight and is designed with modular motor mounts to accommodate several engine options, including Gen 3 Hemis. This kit is a direct bolt-in solution that requires no cutting or welding of the factory chassis.

This handling-focused configuration features tubular control arms with polyurethane bushings to provide increased stability and reduced NVH. The rack-and-pinion steering conversion replaces the vague factory box for precision control. The system includes single-adjustable coil-overs, allowing you to fine-tune your ride quality for street use and set your preferred ride height between a 0" to 2" drop. These kits utilize Mustang II-style spindles, providing a wide array of modern brake upgrade options.

• Manufacturer Part Number: 52346-S400
• Drop Range: 0" to 2"
• Shock Type: Single Adjustable (recommended for street use)
• K-Member: Tubular steel for weight reduction and header clearance
• Steering: Rack-and-pinion conversion included
• Spindles: Uses Mustang II spindles for expanded brake compatibility
• Compatibility: Designed for B-body and E-body platforms only; not compatible with QA1 torsion bar components
• Installation: Bolt-in design; no welding or cutting required
• Origin: Made in the USA
• Warranty: Shocks eligible for Limited Lifetime Warranty

Fits select 2018-2026 BMW (2, 3, 4 Series, Z4), Toyota (GR Supra, GR86), and Volvo (V60) models.

Upgrading to high-performance aftermarket suspension or coilovers often requires removing the factory electronic damping system. Without a proper solution, this removal triggers persistent error messages on the dashboard and may disable other adjustable vehicle dynamics. The KW Electronic Damping Cancellation Kit (EDC Delete) provides a clean, plug-and-play solution that simulates the factory signal to the ECU.

This kit ensures that while the factory dampers are gone, the vehicle’s control units remain functional, maintaining the use of in-cabin drive mode selectors for steering, throttle, and transmission mapping. Designed and manufactured in Germany, these modules are built to withstand the rigors of high-performance driving and environmental exposure.

• Prevents electronic suspension error messages and fault codes
• Preserves factory drive mode selector functionality
• Application-specific connectors for a secure, plug-and-play installation
• Engineered and manufactured in Germany
• Designed for use with aftermarket coilovers or static suspension systems
• Manufacturer Part Number: 68511086
• Limited Lifetime Warranty

Fits 2017-2021 Honda Civic Type R and Civic Type R Limited Edition (FK8).

The KW Electronic Damping Cancellation Kit (part number 68511079) is the definitive solution for owners upgrading their FK8 suspension to aftermarket coilovers. When factory adaptive dampers are removed, the vehicle's ECU typically triggers persistent error messages and may disable certain drive mode features. This kit provides a clean, electronic bypass that communicates with the factory system to suppress warning lights while preserving the functionality of your in-cabin drive mode selectors.

• Prevents electronic damper error messages and dashboard warning lights
• Maintains original in-cabin drive mode selection functionality
• Developed and manufactured by KW automotive in Germany
• Designed specifically for the Honda Civic Type R FK8 chassis electronics
• Direct-fit installation with factory-style connectors
• Manufacturer Part Number: 68511079

Fits 2018-2023 Kia Stinger (CK) models across all trims including GT, GT-Line, and Tribute Edition.

Upgrading your Kia Stinger to a high-performance coilover system typically requires the removal of the factory electronic damping components. Without a bypass, this modification triggers dashboard error messages and can limit the functionality of your vehicle's drive mode settings. The KW Electronic Damping Cancellation Kit (68511070) provides a clean, plug-and-play solution that prevents Malfunction Indicator Light (MIL) warnings while preserving the cabin-controlled drive mode logic.

Engineered in Germany to meet strict quality standards, these modules interface directly with the factory wiring harness. This ensures the ECU receives the correct signal feedback, allowing you to run aftermarket dampers without electronic interference or system faults. The installation is completely reversible and requires no cutting or splicing of the original wiring.

• Prevents electronic suspension error messages (EDC/ESC)
• Maintains functionality of in-cabin drive mode selectors
• Plug-and-play installation with OE-style connectors
• Designed and manufactured in Germany
• Weatherproof housing for long-term durability
• Manufacturer Part Number: 68511070

Vehicle Fitment

Fits select 2015-2023 Audi R8 and Lamborghini Huracan models. The KW Electronic Damping Cancellation Kit provides a specialized solution for owners upgrading to aftermarket suspension systems who want to retain full control over their vehicle's cabin electronics.

When replacing factory electronic dampers with performance coilovers or other non-electronic shocks, the vehicle's ECU typically triggers error messages or enters a restricted mode. This kit plugs directly into the factory wiring harness, effectively bypassing the sensors to prevent dash warnings while maintaining the full functionality of the in-cabin drive mode selection system. Each kit is engineered to handle the specific electrical signals of the Audi and Lamborghini damping systems, ensuring the chassis control module remains satisfied with the signal feedback.

• Prevents electronic damper error messages and dashboard warning lights
• Maintains functionality of factory drive-mode selection profiles
• Engineered and manufactured by KW in Fichtenberg, Germany
• Developed to meet or exceed original equipment manufacturer quality standards
• Designed for seamless integration with the factory wiring harness
• Manufacturer Part Number: 68510489

Fits select 2014-2025 BMW X1, X2 and Mini Cooper, Clubman, and Countryman models.

Upgrading your factory electronic suspension to a performance coilover system often triggers ECU error codes and dashboard warning lights. The KW Electronic Damping Cancellation Kit (68510477) provides a precise, plug-and-play solution that prevents these errors while maintaining the functionality of your vehicle's factory drive mode settings. This ensures that only the damping adjustment is deactivated, while other electronic controls remain fully operational.

Engineered and manufactured in Germany to strict quality management standards, this kit allows you to install aftermarket suspension without compromising the vehicle's electrical infrastructure. Each module is designed to integrate seamlessly with the factory wiring harness, providing a reliable bypass for the original electronic damping signals.

• Eliminates suspension error messages and dashboard warning lights after damper removal
• Maintains factory in-cabin drive mode selection functionality
• Simple plug-and-play installation into factory harness connectors
• Compatible with any aftermarket coilover or strut system
• German-engineered by KW automotive for long-term reliability

• Manufacturer Part Number: 68510477
• Origin: Made in Germany
• Fitment Type: Model-specific electronic bypass

Fits select 2017-2025 Audi A4, A5, Q5, RS5, RS6, RS7, S4, S5, and SQ5 models.

When upgrading to high-performance aftermarket coilovers or conventional dampers on Audi vehicles equipped with factory electronic damping control (EDC), the vehicle's ECU typically triggers a suspension fault and restricts drive mode functionality. The KW Electronic Damping Cancellation Kit (68510476) provides a reliable, plug-and-play solution that prevents these error messages while allowing you to retain the use of your in-cabin drive mode settings.

• Prevents suspension-related dash warnings and dashboard error codes
• Maintains full functionality of factory in-cabin drive modes
• Simple plug-and-play installation using factory harness connectors
• Engineered and manufactured in Germany to meet strict quality standards
• Designed for compatibility with all aftermarket suspension systems
• Manufacturer Part Number: 68510476

This kit ensures your vehicle's electronic control unit continues to receive the expected signals from the suspension system, preventing the car from entering limp mode or disabling performance features after the factory electronic shocks are removed.

Fits 2016-2018 Ford Focus RS.

When upgrading the suspension on your 2016-2018 Ford Focus RS to high-performance coilovers or passive dampers, the vehicle's factory Electronic Damping Control (EDC) system will no longer detect the original shocks, resulting in persistent error messages and dashboard warning lights. The KW Electronic Damping Cancellation Kit (68510462) provides a specialized plug-and-play solution to suppress these signals without interfering with other vehicle electronics.

Designed and manufactured in Germany, this kit allows you to run the aftermarket suspension of your choice while maintaining the functionality of the factory in-cabin drive modes. Each module connects directly to the original factory connectors, ensuring a secure and weather-resistant installation that meets original equipment standards.

• Prevents electronic suspension error messages when removing factory dampers
• Maintains functionality of factory drive mode selection
• Plug-and-play installation with OE-style connectors
• Engineered to withstand the thermal and vibration loads of performance driving
• Made in Germany to high quality management standards
• Manufacturer Part Number: 68510462

Fits select 2016-2024 Chevrolet Camaro and 2018-2026 Ford Mustang models equipped with factory electronic damping.

When upgrading a vehicle's suspension to aftermarket coilovers or static dampers, removing the factory-equipped electronic damping system often triggers persistent ECU error messages and disables selectable in-cabin drive modes. The KW Electronic Damping Cancellation Kit (68510457) provides a seamless solution to this problem. These modules plug directly into the factory wiring harness, effectively spoofing the signal to the vehicle's control unit.

Engineered and manufactured in Fichtenberg, Germany, this kit allows you to improve your vehicle's handling with high-performance suspension while maintaining the integrity of the onboard electronics. This is an essential component for owners who want to avoid dashboard warning lights and retain full functionality of their performance drive settings.

• Prevents ECU error messages and dashboard warnings when factory electronic dampers are removed
• Maintains the functionality of factory in-cabin drive modes
• Plug-and-play installation using OEM-style connectors
• Developed and tested by KW automotive in Germany
• Manufacturer Part Number: 68510457

Fits select 2015-2023 Audi A3, S3, RS3, TT, TTS, and TTRS models.

Upgrading your factory suspension to high-performance coilovers often means removing the original electronic damping system, which can trigger persistent dashboard error messages and disable drive mode functionality. The KW Electronic Damping Cancellation Kit (MPN 68510424) provides a sophisticated solution by effectively communicating with the vehicle's control modules to suppress these errors.

Engineered and manufactured in Fichtenberg, Germany, this kit allows you to maintain the use of your in-cabin drive mode selectors for other vehicle systems (such as steering and throttle response) without interference from the missing factory dampers. Each kit is built to OE quality standards to ensure long-term reliability under the stresses of spirited driving.

• Eliminates suspension error codes when factory electronic dampers are removed
• Maintains full functionality of factory in-cabin drive mode profiles
• Direct plug-and-play installation into factory harness points
• Made in Germany to strict KW quality management standards
• Manufacturer Part Number: 68510424

Vehicle Fitment:

Fits 2015-2020 BMW M3 and M4 (Base, CS, and GTS models) equipped with factory electronic damping.

When upgrading to high-performance aftermarket suspension or coilovers on your BMW M-car, the removal of the factory electronic dampers often triggers an Electronic Damper Control (EDC) error message on the dashboard, which can limit vehicle functionality. The KW Electronic Damping Cancellation Kit (EDC Delete) provides a clean, plug-and-play solution to bypass these fault codes without requiring permanent modifications to your vehicle's wiring harness.

This kit ensures that your BMW's remaining drive mode adjustments—such as steering weight and throttle response—remain fully functional and accessible from the cabin. Engineered and manufactured in Germany, these modules are designed to handle the high-standard quality management requirements of modern BMW chassis systems.

• Prevents dashboard error messages and limp-mode conditions caused by removing factory electronic dampers
• Maintains functionality of in-cabin drive mode settings for steering and engine mapping
• Plug-and-play installation into factory connectors; no cutting or splicing required
• Engineered to exceed original equipment manufacturer quality standards
• Manufacturer Part Number: 68510390

Fits select 2015-2026 Audi Q3, Q4 e-tron, S3; BMW X5; and Volkswagen Arteon, Golf, Golf R, GTI, and ID.4.

When upgrading to high-performance coilovers or static suspension on vehicles equipped with factory electronic damping systems, removing the original dampers triggers persistent error messages on the dashboard. The KW Electronic Damping Cancellation Kit (EDC Delete) solves this by providing a plug-and-play solution that mimics the factory signal, allowing you to upgrade your suspension without compromising your vehicle's electronics.

Engineered and manufactured in Germany, this kit is specifically designed to integrate with the OE wiring. It ensures that all other in-cabin drive mode functions remain operational while preventing the vehicle's ECU from entering a fault state or "limp mode" due to missing damper signals. This is an essential component for any enthusiast installing coilovers on modern chassis equipped with adaptive suspension.

• Prevents dashboard error messages and fault codes when OE electronic dampers are removed
• Maintains the functionality of factory in-cabin drive mode selection systems
• Plug-and-play installation into factory harness points
• Designed to withstand high-stress environments and automotive heat cycles
• Manufactured in Germany to OE quality standards
• Part Number: 68510342

Fits select 2012-2025 Porsche 911, 718 Boxster, 718 Cayman, Boxster, and Cayman models.

The KW Electronic Damping Cancellation Kit (EDC Delete) is the professional solution for Porsche owners upgrading to high-performance aftermarket coilovers that do not utilize the factory electronic damping system. When PASM-equipped (Porsche Active Suspension Management) dampers are removed, the vehicle's ECU typically generates a dashboard error message and may limit the functionality of other chassis systems or drive modes. This kit effectively bypasses the electronic signal, preventing error codes while ensuring all other cabin controls and drive modes remain fully operational.

• Prevents suspension-related error messages and dashboard warning lights after damper replacement
• Maintains the functionality of factory in-cabin drive mode selectors
• Engineered specifically for the Porsche electronic damping architecture
• Direct plug-and-play installation into factory harness connectors with no wire cutting
• Designed and manufactured in Germany to OEM-level quality standards
• Manufacturer Part Number: 68510316

Fits select 2012-2014 Chrysler 300 and 2012-2023 Dodge Challenger and Charger models equipped with factory electronic suspension.

The KW Electronic Damping Cancellation Kit (EDC) is the professional solution for enthusiasts upgrading to aftermarket coilovers while retaining the vehicle's original electronics and drive-mode settings. When factory electronic dampers are removed, the vehicle's control unit typically triggers error messages or restricts performance. This kit effectively bypasses those signals without interfering with other control systems.

Engineered and manufactured in Germany, these modules provide a clean, plug-and-play installation. By connecting directly to the factory harness, the kit prevents dashboard warning lights and ensures that your in-cabin drive mode selectors remain functional for other vehicle systems like steering and throttle response. This is a must-have component for any Chrysler or Dodge suspension overhaul involving non-electronic dampers.

• Prevents ECU error messages when removing factory electronic dampers
• Maintains functionality of steering and throttle drive modes
• Plug-and-play integration with factory wiring harnesses
• OEM-quality connectors for a secure, weather-resistant fit
• No modifications to factory wiring required
• Developed and manufactured in Fichtenberg, Germany
• Manufacturer Part Number: 68510314

Fits select 2011-2021 BMW 2 Series, 3 Series, 4 Series, X3, and X4 models.

Upgrading to high-performance coilovers often requires removing the factory Electronic Damper Control (EDC) system, which typically triggers dashboard error messages and can interfere with other vehicle systems. The KW Electronic Damping Cancellation Kit (68510301) provides a clean, plug-and-play solution to disable these warnings while preserving the full functionality of your vehicle’s factory drive mode settings (such as Sport and Comfort).

Engineered and manufactured in Germany by KW automotive, these bypass modules interface directly with the factory wiring harness. This ensures the vehicle's control unit receives the expected signals, preventing electronic interference without the need for complex coding or permanent wiring modifications.

• Eliminates dash error messages triggered by removing factory electronic dampers
• Maintains original functionality of in-cabin drive mode selectors
• Simple plug-and-play installation into OEM connectors
• No permanent modifications to the vehicle electronics required
• Developed and manufactured at KW headquarters in Fichtenberg, Germany
• Manufacturer Part Number: 68510301

Fits 2013-2018 BMW M5 and M6 (Base models). The KW Electronic Damping Cancellation Kit provides a clean, reliable solution when upgrading factory electronic suspension to high-performance coilovers or static dampers. Removing the original equipment (OE) electronic dampers typically triggers persistent error codes and can restrict the functionality of other vehicle systems; this kit bypasses those signals to maintain a factory-clean dashboard.

Designed and manufactured in Fichtenberg, Germany, these modules ensure your BMW's ECU continues to recognize the suspension circuit, preserving the operation of factory in-cabin drive modes. Each kit is built to exceed OEM quality standards and undergoes extensive stress testing to handle the heat and vibration of performance driving.

• Prevents electronic damping (EDC) error messages and dashboard warning lights
• Maintains functionality of factory in-cabin drive mode selectors
• Reliable plug-and-play integration with factory electronics
• Engineered and manufactured in Germany
• Manufacturer Part Number: 68510252

Fits select 2009-2018 BMW 5 Series, 6 Series, and 7 Series models, including 528i, 535i, 550i, 640i, 650i, 740i, 750i, and 760Li.

When upgrading to coilovers or aftermarket dampers on vehicles equipped with factory electronic suspension, the ECU often triggers error messages and may limit drive mode functionality. The KW Electronic Damping Cancellation Kit (68510213) provides a clean, plug-and-play solution. This module communicates with the factory electronics to signal that the dampers are functioning correctly, allowing you to install high-performance suspension without dashboard warnings.

• Prevents electronic damper control (EDC) error messages when factory dampers are removed
• Maintains the functionality of factory in-cabin drive mode selectors
• Plug-and-play installation into factory harness connectors
• Engineered and manufactured in Germany for OEM-level reliability
• Durable housing designed to withstand the harsh environment of the wheel well

Manufacturer Part Number: 68510213

Fits 2009-2024 Nissan GT-R R35 models, including Premium, Nismo, Track Edition, and T-spec.

The KW Electronic Damping Cancellation Kit (part number 68510173) is an essential solution for Nissan GT-R owners upgrading to high-performance aftermarket coilovers or dampers. When factory electronic dampers are removed, the vehicle's ECU typically triggers suspension fault codes and warning lights. This plug-and-play module provides the necessary signal to simulate the factory dampers, ensuring a clean dashboard and preventing the vehicle from entering limp mode.

Engineered and manufactured in Germany, this kit allows you to maintain the functionality of other in-cabin drive mode settings while giving you the freedom to choose mechanical suspension components that best suit your driving style. Every kit is built to meet KW's strict quality management standards, ensuring a long-lasting and reliable connection to the factory harness.

• Prevents electronic suspension error messages and dashboard warning lights
• Maintains functionality of factory in-cabin drive modes
• Simple plug-and-play installation with no wire cutting required
• Developed and made in Germany for maximum reliability
• Specifically engineered for the R35 GT-R platform
• Manufacturer Part Number: 68510173

Fits select 2005-2012 Porsche 911 (997) Carrera, Targa, GT2, GT3, and Turbo models (excluding convertible).

The KW Electronic Damping Cancellation Kit (EDC Delete) is a precision-engineered solution for Porsche 911 owners upgrading from factory electronic suspension to aftermarket coilovers. Removing original equipment electronic dampers typically triggers persistent dashboard error messages and can limp-mode electronic systems. This kit provides a clean, plug-and-play bypass that eliminates warning lights while preserving the functionality of other in-cabin drive mode settings.

• Prevents electronic damper error messages and dashboard warnings when installing aftermarket suspension
• Maintains the functionality of factory in-cabin drive mode selectors
• Engineered and manufactured in Germany to meet rigorous quality standards
• Designed for the specific electronic architecture of the Porsche 997 chassis
• Complete kit includes all necessary modules for a seamless installation
• Manufacturer Part Number: 68510168

Fits select 2004-2019 Alfa Romeo 8C Competizione, Maserati GranTurismo, and Maserati Quattroporte models.

When upgrading from a factory electronic suspension to high-performance aftermarket coilovers, the vehicle's ECU often triggers error messages or enters a restricted drive mode because it can no longer detect the factory dampers. The KW Electronic Damping Cancellation Kit (EDC Delete) solves this by providing a plug-and-play solution that communicates with the vehicle's control system, simulating the presence of the original electronics.

This German-engineered kit ensures that all other in-cabin drive modes and electronic stability features remain fully functional without annoying dashboard warnings. It is an essential component for owners installing non-electronic suspension systems who want to maintain the premium factory cabin experience.

• Prevents suspension-related error messages and limp mode
• Maintains functionality of factory drive mode selectors
• Plug-and-play installation into existing factory connectors
• Engineered and manufactured by KW automotive in Germany
• Manufacturer Part Number: 68510151

Fits 2008-2015 Audi R8 models including Base, GT, Plus, and Spyder.

When upgrading an Audi R8 (Type 42) to aftermarket coilovers, removing the factory electronic damping system typically triggers persistent dashboard error messages and can impact other vehicle systems. The KW Electronic Damping Cancellation Kit provides a reliable, plug-and-play solution to bypass these electronic warnings without compromising the functionality of other in-cabin drive modes.

This kit is specifically engineered to interface with the Audi R8 factory harness, ensuring the ECU receives the correct signals to simulate the presence of the original dampers. Developed and manufactured in Germany, these modules are built to handle the heat and vibration of performance driving environments.

• Eliminates dashboard error messages and "fault" codes caused by the removal of factory electronic suspension.
• Maintains the functionality of factory in-cabin drive modes for non-suspension systems.
• Simple plug-and-play installation using factory-style connectors—no wire splicing or cutting required.
• Compatible with any aftermarket coilover system.
• Manufactured in Germany to KW's high-quality standards.
• Manufacturer Part Number: 68510149

Fits 2009-2016 BMW Z4 sDrive28i, sDrive30i, sDrive35i, and sDrive35is (Type Z89).

Upgrading to high-performance coilovers or aftermarket struts often requires the removal of the factory Electronic Damping Control (EDC) system. On the BMW Z4, this typically triggers persistent dashboard error messages and can limit the functionality of other vehicle systems. The KW Electronic Damping Cancellation Kit (68510145) provides a precise, plug-and-play solution that bypasses these warnings while preserving the functionality of factory in-cabin drive mode selectors.

This kit is designed to interface with the factory electronics without requiring any permanent modification to your vehicle's wiring harness. It ensures that only the damper signal is bypassed, leaving all other control units and driving dynamics settings fully operational.

• Eliminates dashboard error messages caused by removing factory electronic dampers
• Maintains full functionality of factory drive mode switches and cabin electronics
• Simple plug-and-play installation using OEM-style connectors
• Developed and manufactured in Fichtenberg, Germany
• Manufacturer Part Number: 68510145

Fitment Table:

Fits select 2003-2017 Audi A4, A5, Q5, RS5, S4, S5, and Porsche Cayenne.

Upgrading from a factory electronic suspension to high-performance aftermarket coilovers or static dampers often triggers persistent dashboard error messages and can interfere with drive mode functionality. The KW Electronic Damping Cancellation Kit (68510144) provides a reliable, plug-and-play solution to deactivate the factory damping control system without compromising the vehicle's other electronic safety or performance systems.

Engineered and manufactured in Germany, this kit ensures your ECU remains satisfied after the removal of factory electronic dampers. By mimicking the signal of the OE components, it allows you to enjoy your new suspension setup without the distraction of warning lights or restricted vehicle modes.

• Prevents dashboard error messages caused by the removal of factory electronic dampers
• Maintains the functionality of factory in-cabin drive modes and control systems
• Direct plug-and-play installation using factory connectors
• Avoids the need for invasive ECU coding or permanent harness modifications
• Exceeds original equipment manufacturer quality standards
• Manufacturer Part Number: 68510144

Fits select 2006-2015 Audi A3, A3 Quattro, TT, TT Quattro, TT RS Quattro, and TTS Quattro models.

When upgrading from a factory electronic suspension to high-performance aftermarket coilovers, the vehicle's ECU often triggers error messages because it can no longer detect the factory dampers. The KW Electronic Damping Cancellation Kit (68510124) provides a reliable solution to bypass these warnings. Designed and manufactured in Germany, this kit allows for the removal of the original equipment (OE) electronic shocks without compromising other vehicle systems.

This module effectively prevents the dashboard error lights associated with the Electronic Damping Control (EDC) system while maintaining the full functionality of the vehicle's in-cabin drive mode selectors. It ensures that the suspension control unit receives the correct signals, keeping the rest of your Audi's electronics operating exactly as intended.

• Prevents dashboard error messages when factory electronic dampers are removed
• Maintains the functionality of factory in-cabin drive modes
• Plug-and-play integration with factory wiring harnesses
• Engineered and manufactured by KW in Germany
• Manufacturer Part Number: 68510124

Fits 2010-2015 Chevrolet Camaro LS, LT, SS, Z/28, and ZL1 models.

The Hotchkis Sport Suspension Chassis Max Brace (part number 20104) addresses a critical weak point in the fifth-generation Camaro platform: rear subframe movement. Under hard acceleration or high-speed cornering, the factory chassis suffers from significant flex, which manifests as traction-robbing wheel hop and unstable handling. This brace triangulates the rear subframe to the chassis frame rails, significantly increasing rigidity to improve steering responsiveness and power delivery.

Engineered for durability and performance, the Chassis Max Brace is manufactured from high-strength, lightweight elliptical aluminum tubing. This tubing is mated to laser-cut, CNC-machined aluminum brackets for precise fitment. The assembly features a durable anthracite powder-coated finish for corrosion resistance and is designed to maintain excellent ground clearance while remaining compatible with most aftermarket exhaust systems. This is a direct bolt-on upgrade that installs in minutes using factory mounting points.

• Construction: Lightweight elliptical aluminum tubing
• Hardware: Laser-cut CNC-machined aluminum brackets
• Finish: Durable anthracite powdercoat
• Installation: Direct bolt-on; no welding or major modifications required
• Compatibility: Clears most aftermarket exhaust systems
• Manufacturer Part Number: 20104

Fits 1998-2005 Volkswagen Golf and Jetta models, including GTI, GLI, TDI, and VR6 trims (1.8T).

The H&R Sport Cup Kit is the definitive solution for enthusiasts seeking a lower ride height and more aggressive handling than a standard suspension provides. This kit is specifically engineered for street use, providing an average lowering of 2.0 inches to significantly reduce the center of gravity and improve cornering dynamics without compromising the vehicle's daily usability.

Each kit consists of performance-tuned lowering springs paired with matching dampers. The progressive spring rate design is key to maintaining superior ride comfort while still achieving a super-low, performance-oriented stance. Manufactured to the highest standards in Germany, this kit replaces your factory suspension with a perfectly matched spring and shock combination.

• Average Lowering: 2.0 inches
• Design: Progressive spring rates for balanced comfort and performance
• Components: Includes performance-tuned springs and specifically valved dampers
• Manufacturing: Precision engineered and made in Germany
• Part Number: 31046-4

Fits select 2001-2005 Volkswagen Jetta Wagon (MK4) models (1.8T).

The H&R Touring Cup Kit (31017T-4) is a complete, precision-engineered suspension system designed to improve vehicle handling and aesthetics while maintaining superior ride comfort. Unlike standalone lowering springs, this kit features performance-tuned dampers specifically matched to H&R progressive-rate springs. This combination lowers the vehicle's center of gravity and reduces the fender well gap, significantly decreasing body roll and improving steering response for a more controlled driving experience.

• Complete system with matched performance dampers and progressive-rate springs
• Lowers center of gravity for improved handling and stability
• Reduces body roll and improves aerodynamic profile
• Designed for street performance and daily driving comfort
• Engineered and manufactured in Germany
• Manufacturer Part Number: 31017T-4

Fits select 2005-2014 Ford Mustang models, including Base, GT, Boss 302, Bullitt, and Shelby GT/GT500/GT500KR.

The Ford Performance Assembled Handling Pack is engineered to lower the center of gravity and provide a track-inspired "road race" feel for your Mustang Coupe. This comprehensive suspension system significantly improves cornering and lateral stability without sacrificing daily ride quality. By utilizing pre-assembled front struts, the installation process is simplified, requiring no spring compressor for a direct bolt-in experience on GT Coupe models.

Each component is carefully tuned to work as a cohesive system, ensuring precise geometry and dampening. This kit includes everything needed to refresh and upgrade your S197 suspension, from the adjustable panhard bar to high-performance sway bars and lowering springs.

• Manufacturer Part Number: M-FR3A-MGTA
• Pre-assembled front struts and rear shocks
• Lowering springs for improved stance and handling
• Upgraded strut mounts and jounce stops
• Comprehensive sway bar kit
• Adjustable rear panhard bar for axle centering
• Direct bolt-in installation

Fits 2005-2014 Ford Mustang GT.

The Ford Racing Handling Pack Fastener Kit (M-FR3-FASTENERS) provides the essential, high-strength hardware required to properly install the components of the Ford Racing Handling Pack. When refreshing your S197 suspension, reusing factory fasteners that have been subjected to years of road debris, corrosion, or torque-to-yield stretching can compromise the safety and alignment of your vehicle.

This kit is specifically designed for enthusiasts installing performance suspension upgrades who require a complete, vehicle-specific hardware solution to ensure every component is secured to factory or performance specifications.

• Complete hardware-only kit for suspension installation
• Direct fit for 2005-2014 Ford Mustang GT models
• Ensures proper torque retention and component security
• Required for the Ford Racing Handling Pack installation
• Manufacturer Part Number: M-FR3-FASTENERS

Fits 2024-2026 Lexus GX550 (Luxury, Luxury+, Overtrail, Overtrail+, Premium, and Premium+).

The Eibach PRO-TRUCK-LIFT STAGE 2 System is a comprehensive suspension upgrade designed to increase ground clearance and improve off-road capability for the Lexus GX550. This kit features front 2.0 coilovers built with an extended-travel monotube design and nitrogen-filled variable force valving, providing precise control on paved roads and maximum traction on technical trails. The adjustable threaded spring perches allow you to dial in the front ride height to accommodate increased loads from aftermarket bumpers or winches.

In the rear, the system utilizes high-performance lift springs and matching sport shocks to maintain balance and load-carrying capacity. This Stage 2 kit includes an air bag delete for models equipped with factory air suspension, ensuring a consistent and reliable mechanical setup for overland use. Every coilover is individually dyno-tested and built with heavy-duty bushings to ensure long-term durability in harsh environments.

• Includes front 2.0 adjustable coilovers and rear sport shocks with lift springs
• 46mm piston monotube design with 6061-T6 billet aluminum mounts
• Equipped with Eibach ERO Off-Road Race Springs
• Threaded front perches for customizable ride height and clearance
• Air bag delete components included for a complete conversion
• Engineered and manufactured by Eibach in the U.S.A.
• Manufacturer Part Number: E86-59-009-01-22