Fits select 2021-2025 Ford Bronco models, including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Stroppe Edition, and Wildtrak.

The Bilstein B8 8112 Black Hawk is a direct-fit, 3-way adjustable coilover assembly engineered for elite off-road performance. This rear right assembly features a large 2.65-inch OD aluminum shock body paired with a finned remote reservoir for increased oil capacity and superior heat dissipation during aggressive driving. Utilizing patented ZoneControl CR technology, the shock provides position-sensitive damping through three compression zones and two rebound zones, managed by three independent pistons. This system virtually eliminates hard bottoming while maintaining a smooth ride over small chatter.

• Damping Control: ZoneControl CR provides position-sensitive damping with 3 compression and 2 rebound zones.
• Adjustability: Clicker knobs allow for precise dual-speed adjustment of both low and high-speed compression.
• Hydraulic Bump Stop: Integrated JCO (internal hydraulic bump stop) prevents harsh bottoming.
• Construction: 2.65-inch OD aluminum body with a finned aluminum remote reservoir for maximum cooling.
• Part Number: 41-314333

Fits select 2021-2025 Ford Bronco models (Badlands, Big Bend, Black Diamond, Everglades, Outer Banks, and Wildtrak).

The Bilstein B8 8112 Black Hawk is a high-performance, direct-fit rear left coilover assembly engineered for the 2021-2025 Ford Bronco. This 3-way adjustable suspension solution utilizes a massive 2.65-inch outer diameter aluminum shock body paired with a finned remote reservoir to maximize oil capacity and cooling during sustained off-road use. The aluminum construction ensures rapid heat dissipation and corrosion resistance in harsh environments.

Equipped with Bilstein’s ZoneControl® technology, this assembly features position-sensitive damping with three independent pistons providing three compression zones and two rebound zones. The system includes an internal hydraulic bump stop (JCO) and dual-speed external adjusters, allowing for precise tuning of both high-speed and low-speed compression to suit specific vehicle loads and terrain requirements.

• Manufacturer Part Number: 41-314326
• Position: Rear Left
• 3-way external damping adjustment
• Dual-speed compression adjustment (High/Low)
• Adjustable internal hydraulic bump stop (JCO)
• 2.65-inch OD aluminum shock body
• Finned aluminum remote reservoir for increased oil capacity
• ZoneControl® CR position-sensitive damping
• Direct-fit installation to factory mounting points

Fits 2021-2025 Ford Bronco models including Badlands, Big Bend, Black Diamond, Wildtrak, and Everglades.

The Bilstein B8 8112 Black Hawk is a high-performance, 3-way adjustable coilover designed to provide superior damping control for late-model Ford Broncos. Built around a massive 2.65-inch aluminum body, this front-left assembly utilizes Bilstein’s ZoneControl® CR technology to deliver position-sensitive damping. This system employs three independent pistons to manage three compression zones and two rebound zones, providing a smooth ride over minor road imperfections while effectively eliminating harsh bottom-outs during high-velocity off-road impacts.

Equipped with a finned aluminum remote reservoir, the B8 8112 maximizes oil capacity and heat dissipation to prevent shock fade during sustained use. Drivers can fine-tune their suspension with dual-speed external clicker knobs for high and low-speed compression, alongside an adjustable internal hydraulic bump stop (JCO) for ultimate bottom-out protection.

• Position: Front Left
• Body Diameter: 2.65 inches
• Material: Aluminum shock body and reservoir
• Technology: ZoneControl® CR position-sensitive damping
• Adjustability: 3-way (Low-speed compression, High-speed compression, and JCO internal bump stop)
• Reservoir: Finned aluminum remote reservoir
• Manufacturer Part Number: 41-314319

Fits 2021-2025 Ford Bronco models (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Stroppe Edition, and Wildtrak).

The Bilstein B8 8112 Black Hawk Front Right Coilover is a professional-grade suspension solution designed for the 2021-2025 Ford Bronco. This direct-fit assembly utilizes Bilstein’s ZoneControl CR technology, providing position-sensitive damping through three compression zones and two rebound zones. The system is managed by three independent pistons, including an internal hydraulic bump stop (JCO) that virtually eliminates harsh bottoming-out during aggressive off-road driving while maintaining a composed ride on paved surfaces.

Constructed for extreme thermal management, this coilover features a 2.65-inch OD aluminum shock body paired with a finned remote reservoir to maximize oil capacity and cooling efficiency. Drivers can fine-tune their suspension with click-adjuster knobs for precise dual-speed adjustment of both low-speed and high-speed compression. This assembly is designed to handle the varied demands of a loaded or unloaded Bronco across rugged terrain.

• Manufacturer Part Number: 41-314227
• Position: Front Right
• Shock Body: 2.65" Aluminum with finned remote reservoir
• Damping: 3-Way adjustable (High/Low Speed Compression and JCO)
• Technology: ZoneControl CR with 3 independent pistons
• Includes: Coil spring and all necessary hardware for installation

Fits 1999-2023 Ford F-250 and F-350 Super Duty models equipped with a Dana 60 front axle.

The Artec Industries Bridge Upgrade Kit (RM6030) is engineered to provide a secure and stable mounting platform atop the Dana 60 differential housing. This heavy-duty bridge is a critical component for owners looking to reinforce their axle housing or integrate custom suspension links. By bridging the gap between the axle tube and the differential, this kit increases structural rigidity, helping to prevent housing flex during high-torque situations or demanding off-road maneuvers.

• Specifically designed for Ford Super Duty Dana 60 axle geometries
• Heavy-duty construction for maximum durability and weldability
• Provides a flat, stable surface for mounting upper control arms or trusses
• Integrates seamlessly with existing axle components to strengthen the housing
• Manufacturer Part Number: RM6030

Fits 1997-2013 Chevrolet Corvette C5 and C6 models, including Base, Z06, ZR1, Grand Sport, and 427 variants.

The aFe Control Johnny O'Connell Stage 1 Suspension Package is a track-tested, comprehensive upgrade designed to transform the handling of your Corvette. Developed and tuned by 4-time Le Mans winner Johnny O'Connell, this package replaces the soft factory components with precision-engineered sway bars and mono-tube shocks to deliver flatter cornering and significantly improved car control without sacrificing street drivability.

• Johnny O'Connell Sway Bars: Manufactured from 4130 Chromoly tubular steel for high strength and lightweight performance. The rear bar features 3-way adjustability, allowing you to fine-tune the chassis balance to your driving style. Finished in signature Johnny O'Connell yellow.
• Mono-Tube Shock Absorbers: Features 6061 T6 hard-anodized aluminum bodies with mono-tube construction and an internal floating piston (IFP) for consistent, fade-free damping.
• Precision Adjustability: Damping is adjustable for both rebound and compression, while the shock design supports ride height adjustment for a perfected stance.
• Heavy-Duty Hardware: The kit includes high-durometer polyurethane bushings, heavy-duty end links, and a ball-on-axis upper mount system to reduce friction and eliminate deflection.
• Manufacturer Part Number: 530-401001-J