Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
132 products
132 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Eibach Pro-Lift-Kit springs are designed to provide a suspension lift for your vehicle without the use of coilover systems or spacer lifts. Eibach spring lifts allow full range of suspension travel without additional stress on bushings and ball-joints as seen with spacer lift systems.
WarrantyInstallation Instructions
- Precision Engineered for Improved Off-Road Capability.
- More Fender Clearance for Larger Wheels and Tires.
- Excellent On-Road Stability and Handling.
- Increased Ground Clearance.
- Made in U.S.A.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2024 | Ram | 2500 | Big Horn |
| 2014-2024 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2014-2021 | Ram | 2500 | Laramie Longhorn |
| 2016-2024 | Ram | 2500 | Limited |
| 2021-2024 | Ram | 2500 | Limited Longhorn |
| 2014-2015,2019-2024 | Ram | 2500 | Lone Star |
| 2014-2016 | Ram | 2500 | Outdoorsman |
| 2022-2024 | Ram | 2500 | Power Wagon |
| 2023-2024 | Ram | 2500 | Rebel |
| 2014-2018 | Ram | 2500 | SLT |
| 2024 | Ram | 2500 | Special Service |
| 2014-2024 | Ram | 2500 | Tradesman |
Eibach's PRO-PLUS KIT combines our legendary PRO-KIT lowering springs with our ANTI-ROLL-KIT front and rear stabilizer bars for a tuned suspension system.
Warranty- Performance Springs and Sway Bars = Superior Handling for the Serious Enthusiast.
- Simple Bolt-On, No Modifications: Install, Set the Alignment and Carve.
- Stop Quicker, Corner Faster and Better MPG!
- PRO-KIT + ANTI-ROLL-KIT = PRO-PLUS.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2020 | Ford | Mustang | Bullitt |
| 2015-2021 | Ford | Mustang | EcoBoost |
| 2015-2021 | Ford | Mustang | EcoBoost Premium |
| 2015-2023 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2021 | Ford | Mustang | GT Premium |
| 2021 | Ford | Mustang | Mach 1 |
| 2015-2020 | Ford | Mustang | Shelby GT350 |
| 2015-2020 | Ford | Mustang | Shelby GT350R |
| 2020-2021 | Ford | Mustang | Shelby GT500 |
| 2015-2017 | Ford | Mustang | V6 |
$749.95
$899.95
$469.95
$189.95
Launch harder, reduce wheel hop, and add cornering consistency on your 1982-2002 GM F-body with a non-adjustable Rear Suspension Kit from BMR's suspension. BMRs polyurethane, non-adjustable Rear Suspension Kit consists of a Panhard rod and lower control arms. Manufactured from heavy-duty 1 5/8-inch diameter, 0.120-inch wall, and 1 -inch, 0.120-inch wall DOM steel tubing, the Rear Suspension Kit provides all the strength youll need for any performance application. BMRs Rear Suspension Kit (RSK031) uses greasable, 95-durometer, internally fluted polyurethane bushings, which add a more responsive feel over the factory rubber bushings. Designed to work well for street performance, drag race, and handling applications. The heavy-duty construction of the lower control arms and Panhard rod eliminate flex, giving you much improved repeatability on the street, starting line, or in the corners. This kit is the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH and ride quality. Installation time is 3-4 hours. Available in black hammertone or red powerdercoat. Proudly made in the U.S.A.!
Application GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1988,1993-2002 | Chevrolet | Camaro | Base |
| 1982-1986 | Chevrolet | Camaro | Berlinetta |
| 1993 | Chevrolet | Camaro | Indianapolis 500 Pace Car |
| 1985-1990 | Chevrolet | Camaro | Iroc-Z |
| 1987 | Chevrolet | Camaro | LT |
| 1989-1992,1996-1997 | Chevrolet | Camaro | RS |
| 1992 | Chevrolet | Camaro | RS Heritage Edition |
| 1982-1987 | Chevrolet | Camaro | Sport |
| 1982-1987,1991-2002 | Chevrolet | Camaro | Z28 |
| 1992 | Chevrolet | Camaro | Z28 Heritage Edition |
| 1982 | Chevrolet | Camaro | Z28 Indianapolis 500 Pace Car |
| 1998-2002 | Chevrolet | Camaro | Z28 SS |
| 1982-2002 | Pontiac | Firebird | Base |
| 1989-2002 | Pontiac | Firebird | Formula |
| 1982-1986 | Pontiac | Firebird | S/E |
| 1982-2002 | Pontiac | Firebird | Trans Am |
| 1994 | Pontiac | Firebird | Trans Am GT |
| 1989-1992 | Pontiac | Firebird | Trans Am GTA |
| 1989 | Pontiac | Firebird | Trans Am GTA SE |
$479.95
Launching harder, reducing wheel hop, and adding cornering consistency to your 1978-1987 GM G-body is easy with a Rear Suspension Kit from BMR's suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane, non-adjustable Rear Suspension Kit (RSK028) consists of non-adjustable lower control arms, on-car adjustable upper control arms, and control arm reinforcement braces. The lower control arms are manufactured from heavy-duty 1.50-inch diameter, 0.120-inch wall, DOM steel tubing, the lower control arms provide all the strength you'll need for any performance application. The upper control arms are manufactured from 1.25-inch diameter, 0.120-inch wall, DOM steel tubing, strong enough for any compression load. The center adjuster is CNC-machined from chrome-moly steel with rolled threads for the ultimate in strength and durability. This design gives you a strong control arm that greatly improves performance. The reinforcement braces are made from 1.0-inch diameter, 0.156-inch wall, steel tubing to help reduce frame deflection. The upper and lower control arms come with greasable, 95-durometer polyurethane bushings that add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which keeps grease in the bushing, even under heavy load.
Application GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1978-1987 | Buick | Regal | Base |
| 1982-1983 | Buick | Regal | Estate Wagon |
| 1987 | Buick | Regal | GNX |
| 1984-1987 | Buick | Regal | Grand National |
| 1978-1987 | Buick | Regal | Limited |
| 1982 | Buick | Regal | Limited Turbo |
| 1978-1982 | Buick | Regal | Sport |
| 1983-1986 | Buick | Regal | T-Type |
| 1978-1981 | Chevrolet | Malibu | Base |
| 1978-1983 | Chevrolet | Malibu | Classic |
| 1978-1980 | Chevrolet | Malibu | Classic Estate |
| 1978-1981 | Chevrolet | Malibu | Classic Landau |
| 1979-1980 | Chevrolet | Malibu | Classic Sport |
| 1979-1980 | Chevrolet | Malibu | Estate |
| 1979 | Chevrolet | Malibu | Landau |
| 1979 | Chevrolet | Malibu | Police |
| 1979-1980 | Chevrolet | Malibu | Sport |
| 1980 | Oldsmobile | Cutlass | Base |
| 1980-1981 | Oldsmobile | Cutlass | Brougham |
| 1980-1981 | Oldsmobile | Cutlass | LS |
| 1978-1979 | Oldsmobile | Cutlass | Vista Cruiser |
| 1979 | Oldsmobile | Cutlass | Vista Cruiser Brougham |
| 1978-1987 | Pontiac | Grand Prix | Base |
| 1981-1987 | Pontiac | Grand Prix | Brougham |
| 1984-1987 | Pontiac | Grand Prix | LE |
| 1978-1983 | Pontiac | Grand Prix | LJ |
| 1978-1980 | Pontiac | Grand Prix | SJ |
$479.95
In addition, the reinforcement braces strengthen the upper control arm frame mounts by tying the upper mounts and lower mounts together.BMR's suspension designed its Rear Suspension Kits to work well in street performance, drag race, and road race applications. The heavy-duty construction of the upper and lower control arms eliminate flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings easily handle the high compression loads of aggressive launches and hard acceleration, yet offer plenty of articulation for great handling. The reinforcement braces provide additional strength to the rear suspension for a more responsive driving experience. This product is the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR's suspension!BMR's suspensions Rear Suspension Kits are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!Control arm hardware kit RH002 (includes upper and lower control arm hardware - Highly Recommended) is also available.
Application GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1970,1972 | Buick | Skylark | 350 |
| 1968-1972 | Buick | Skylark | Base |
| 1968-1972 | Buick | Skylark | Custom |
| 1968 | Chevrolet | Chevelle | 300 |
| 1968-1969 | Chevrolet | Chevelle | 300 Deluxe |
| 1970-1972 | Chevrolet | Chevelle | Base |
| 1968-1972 | Chevrolet | Chevelle | Concours |
| 1969-1972 | Chevrolet | Chevelle | Concours Estate |
| 1969-1972 | Chevrolet | Chevelle | Greenbrier |
| 1968-1972 | Chevrolet | Chevelle | Malibu |
| 1968-1972 | Chevrolet | Chevelle | Nomad |
| 1971-1972 | Chevrolet | Chevelle | SS |
| 1968-1972 | Chevrolet | El Camino | Base |
| 1968-1972 | Chevrolet | El Camino | Custom |
| 1968-1972 | Chevrolet | El Camino | SS |
| 1970-1972 | Chevrolet | Monte Carlo | Base |
| 1968-1971 | Oldsmobile | 442 | Base |
| 1968-1972 | Oldsmobile | Cutlass | Base |
| 1972 | Oldsmobile | Cutlass | Cruiser |
| 1968,1971-1972 | Oldsmobile | Cutlass | S |
| 1968-1972 | Pontiac | GTO | Base |
| 1970-1971 | Pontiac | GTO | The Judge |
| 1968-1972 | Pontiac | LeMans | Base |
| 1972 | Pontiac | LeMans | Luxury |
| 1969-1970 | Pontiac | LeMans | Safari |
| 1970-1972 | Pontiac | LeMans | Sport |
| 1971 | Pontiac | LeMans | T37 |
$279.95
Launching harder, reducing wheel hop, and adding cornering consistency to your 1964-1967 GM A-body is easy with a Rear Suspension Kit from BMR's suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs polyurethane, non-adjustable Rear Suspension Kit (RSK002) consists of upper and lower control arms for early A-bodies. Manufactured from heavy-duty 1.5x3-inch diameter, 0.120-inch wall rectangular steel tubing, the lower control arms provide all the strength youll need for any performance application. The upper control arms are manufactured from 1.625-inch diameter, 0.120-inch wall DOM steel tubing, strong enough for any compression load. Greasable, 95-durometer polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which keeps grease in the bushing, even under heavy load. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMR's suspension designed its Rear Suspension Kits to work well in street performance, drag race, and road race applications. The heavy-duty construction of the upper and lower control arms eliminate flex, giving you much improved repeatability on the street, starting line, or in the corners.
Application GuideThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1965-1967 | Buick | Gran Sport | Base |
| 1964-1967 | Buick | Skylark | Base |
| 1967 | Chevrolet | Chevelle | 300 |
| 1967 | Chevrolet | Chevelle | 300 Deluxe |
| 1967 | Chevrolet | Chevelle | Concours |
| 1964-1967 | Chevrolet | El Camino | Base |
| 1964-1967 | Oldsmobile | 442 | Base |
| 1964-1967 | Oldsmobile | Cutlass | Base |
| 1964-1967 | Oldsmobile | Cutlass | Holiday |
| 1967 | Oldsmobile | Cutlass | Turnpike Cruiser |
| 1964-1967 | Pontiac | GTO | Base |
| 1964-1967 | Pontiac | LeMans | Base |
Bilstein B12 (Special) suspension kits are designed to alter the vehicles ride height for optimum performance. Utilizing various different technologies to achieve the optimum ride height for a specific requirement. Bilstein B12 (Special) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
Installation InstructionsWarranty
- Utilizing various different technologies to achieve the optimum ride height for a specific requirement
- Provide the perfect combination of suspension dynamics, quality and aesthetics
- Designed to alter the vehicles ride height for optimum performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2023 | Lexus | GX460 | Base |
| 2023 | Lexus | GX460 | Black Line Edition |
| 2014-2023 | Lexus | GX460 | Luxury |
| 2010-2023 | Lexus | GX460 | Premium |
| 2003-2009 | Lexus | GX470 | Base |
| 2023 | Toyota | 4Runner | 40th Anniversary Edition |
| 2003-2009 | Toyota | 4Runner | Limited |
| 2003-2024 | Toyota | 4Runner | SR5 |
| 2018-2024 | Toyota | 4Runner | SR5 Premium |
| 2010-2016,2021-2022 | Toyota | 4Runner | Trail |
| 2017-2024 | Toyota | 4Runner | TRD Off-Road |
| 2018-2024 | Toyota | 4Runner | TRD Off-Road Premium |
| 2015-2024 | Toyota | 4Runner | TRD Pro |
| 2020-2021 | Toyota | 4Runner | Venture |
| 2007-2014 | Toyota | FJ Cruiser | Base |
| 2008 | Toyota | FJ Cruiser | Trail Teams Special Edition |
| 2007 | Toyota | FJ Cruiser | TRD Special Edition |
| 2016-2023 | Toyota | Tacoma | Limited |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Brochure - A general brochure describing a brand, company, product line. If brochure in question is for a specific product, use code PDB.Catalog
Installation Instructions
Material Safety Data Sheet
Product Brochure - a specific brochure describing a Product
Warranty
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Toyota | 4Runner | SR5 |
| 2025-2026 | Toyota | 4Runner | TRD Off-Road |
| 2025-2026 | Toyota | 4Runner | TRD Off-Road Premium |
| 2025-2026 | Toyota | 4Runner | TRD Sport |
| 2025-2026 | Toyota | 4Runner | TRD Sport Premium |
| 2024-2026 | Toyota | Land Cruiser | 1958 |
| 2024-2026 | Toyota | Land Cruiser | Base |
| 2024 | Toyota | Land Cruiser | First Edition |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
CatalogInstallation Instructions
Material Safety Data Sheet
Product Brochure - a specific brochure describing a Product
Warranty
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2026 | Chevrolet | Colorado | LT |
| 2023-2026 | Chevrolet | Colorado | WT |
| 2023-2026 | Chevrolet | Colorado | Z71 |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Product Brochure - a specific brochure describing a ProductInstallation Instructions
Warranty
Brochure - A general brochure describing a brand, company, product line. If brochure in question is for a specific product, use code PDB.
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Toyota | Sequoia | 1794 Edition |
| 2023-2026 | Toyota | Sequoia | Capstone |
| 2023-2026 | Toyota | Sequoia | Limited |
| 2023-2026 | Toyota | Sequoia | Platinum |
| 2023-2026 | Toyota | Sequoia | SR5 |
| 2022-2026 | Toyota | Tundra | 1794 Edition |
| 2022-2026 | Toyota | Tundra | Capstone |
| 2022-2026 | Toyota | Tundra | Limited |
| 2022-2026 | Toyota | Tundra | Platinum |
| 2022-2026 | Toyota | Tundra | SR |
| 2022-2026 | Toyota | Tundra | SR5 |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Product Brochure - a specific brochure describing a ProductInstallation Instructions
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2014-2018 | Chevrolet | Silverado 1500 | High Country |
| 2015-2018 | Chevrolet | Silverado 1500 | LS |
| 2014-2018 | Chevrolet | Silverado 1500 | LT |
| 2014-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2014-2018 | Chevrolet | Silverado 1500 | WT |
| 2019 | Chevrolet | Silverado 1500 LD | Custom |
| 2019 | Chevrolet | Silverado 1500 LD | LT |
| 2019 | Chevrolet | Silverado 1500 LD | WT |
| 2014-2018 | GMC | Sierra 1500 | Base |
| 2014 | GMC | Sierra 1500 | Denali |
| 2014-2018 | GMC | Sierra 1500 | SLE |
| 2014-2018 | GMC | Sierra 1500 | SLT |
| 2019 | GMC | Sierra 1500 Limited | Base |
| 2019 | GMC | Sierra 1500 Limited | SLE |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Product Brochure - a specific brochure describing a ProductInstallation Instructions
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2021 | Ford | Bronco | First Edition |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
| 2021-2022 | Ford | Bronco | Wildtrak |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Installation InstructionsProduct Brochure - a specific brochure describing a Product
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2024 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2021 | Ford | Bronco | First Edition |
| 2023-2024 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2024 | Ford | Bronco | Outer Banks |
| 2021-2022 | Ford | Bronco | Wildtrak |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Installation InstructionsProduct Brochure - a specific brochure describing a Product
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2023-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2021-2022 | Ford | Bronco | Wildtrak |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Installation InstructionsProduct Brochure - a specific brochure describing a Product
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | Bronco | Badlands |
| 2021-2023,2025 | Ford | Bronco | Base |
| 2021-2025 | Ford | Bronco | Big Bend |
| 2021-2024 | Ford | Bronco | Black Diamond |
| 2023-2024 | Ford | Bronco | Everglades |
| 2021 | Ford | Bronco | First Edition |
| 2023-2025 | Ford | Bronco | Heritage Edition |
| 2023-2024 | Ford | Bronco | Heritage Limited Edition |
| 2021-2025 | Ford | Bronco | Outer Banks |
| 2021-2022 | Ford | Bronco | Wildtrak |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Installation InstructionsProduct Brochure - a specific brochure describing a Product
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2023 | Lexus | GX460 | Base |
| 2023 | Lexus | GX460 | Black Line Edition |
| 2014-2023 | Lexus | GX460 | Luxury |
| 2010-2023 | Lexus | GX460 | Premium |
| 2023 | Toyota | 4Runner | 40th Anniversary Edition |
| 2010-2024 | Toyota | 4Runner | SR5 |
| 2018-2024 | Toyota | 4Runner | SR5 Premium |
| 2010-2016,2021-2022 | Toyota | 4Runner | Trail |
| 2017-2024 | Toyota | 4Runner | TRD Off-Road |
| 2018-2024 | Toyota | 4Runner | TRD Off-Road Premium |
| 2015-2024 | Toyota | 4Runner | TRD Pro |
| 2020-2021 | Toyota | 4Runner | Venture |
| 2010-2014 | Toyota | FJ Cruiser | Base |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Product Brochure - a specific brochure describing a ProductInstallation Instructions
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2022 | Toyota | Sequoia | Limited |
| 2021-2022 | Toyota | Sequoia | Nightshade |
| 2008-2022 | Toyota | Sequoia | SR5 |
| 2018-2022 | Toyota | Sequoia | TRD Sport |
| 2014-2021 | Toyota | Tundra | 1794 Edition |
| 2007-2013 | Toyota | Tundra | Base |
| 2007-2021 | Toyota | Tundra | Limited |
| 2021 | Toyota | Tundra | Nightshade |
| 2010-2021 | Toyota | Tundra | Platinum |
| 2014-2021 | Toyota | Tundra | SR |
| 2007-2011,2014-2021 | Toyota | Tundra | SR5 |
| 2021 | Toyota | Tundra | Trail |
| 2015-2017,2019-2021 | Toyota | Tundra | TRD Pro |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Installation InstructionsProduct Brochure - a specific brochure describing a Product
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1996-2004 | Toyota | Tacoma | Base |
| 1998-2000 | Toyota | Tacoma | Limited |
| 1998-2004 | Toyota | Tacoma | Pre Runner |
| 1996-2000 | Toyota | Tacoma | SR5 |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Installation InstructionsProduct Brochure - a specific brochure describing a Product
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2001 | Toyota | 4Runner | Base |
| 1996-2002 | Toyota | 4Runner | Limited |
| 1996-2002 | Toyota | 4Runner | SR5 |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Installation InstructionsProduct Brochure - a specific brochure describing a Product
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013 | Chevrolet | Avalanche | Black Diamond LS |
| 2013 | Chevrolet | Avalanche | Black Diamond LT |
| 2007-2012 | Chevrolet | Avalanche | LS |
| 2007-2012 | Chevrolet | Avalanche | LT |
| 2010-2013 | Chevrolet | Silverado 1500 | LS |
| 2007-2013 | Chevrolet | Silverado 1500 | LT |
| 2007-2013 | Chevrolet | Silverado 1500 | LTZ |
| 2007-2013 | Chevrolet | Silverado 1500 | WT |
| 2008-2013 | Chevrolet | Tahoe | Hybrid |
| 2007-2014 | Chevrolet | Tahoe | LS |
| 2007-2014 | Chevrolet | Tahoe | LT |
| 2010-2013 | GMC | Sierra 1500 | SL |
| 2007-2013 | GMC | Sierra 1500 | SLE |
| 2007-2013 | GMC | Sierra 1500 | SLT |
| 2007-2013 | GMC | Sierra 1500 | WT |
| 2008-2013 | GMC | Yukon | Hybrid |
| 2007-2014 | GMC | Yukon | SLE |
| 2007-2014 | GMC | Yukon | SLT |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Installation InstructionsProduct Brochure - a specific brochure describing a Product
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2014-2018 | Chevrolet | Silverado 1500 | High Country |
| 2015-2018 | Chevrolet | Silverado 1500 | LS |
| 2014-2018 | Chevrolet | Silverado 1500 | LT |
| 2014-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2014-2018 | Chevrolet | Silverado 1500 | WT |
| 2019 | Chevrolet | Silverado 1500 LD | Custom |
| 2019 | Chevrolet | Silverado 1500 LD | LT |
| 2019 | Chevrolet | Silverado 1500 LD | WT |
| 2015-2020 | Chevrolet | Tahoe | LS |
| 2015-2020 | Chevrolet | Tahoe | LT |
| 2014-2018 | GMC | Sierra 1500 | Base |
| 2014 | GMC | Sierra 1500 | Denali |
| 2014-2018 | GMC | Sierra 1500 | SLE |
| 2014-2018 | GMC | Sierra 1500 | SLT |
| 2019 | GMC | Sierra 1500 Limited | Base |
| 2019 | GMC | Sierra 1500 Limited | SLE |
| 2015-2020 | GMC | Yukon | SLE |
| 2015-2020 | GMC | Yukon | SLT |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Installation InstructionsProduct Brochure - a specific brochure describing a Product
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2004-2008 | Ford | F-150 | FX4 |
| 2006-2008 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2008 | Ford | F-150 | King Ranch |
| 2004-2008 | Ford | F-150 | Lariat |
| 2008 | Ford | F-150 | Limited |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2004-2008 | Ford | F-150 | XL |
| 2004-2008 | Ford | F-150 | XLT |
| 2006-2008 | Lincoln | Mark LT | Base |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Installation InstructionsProduct Brochure - a specific brochure describing a Product
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2023 | Lexus | GX460 | Base |
| 2023 | Lexus | GX460 | Black Line Edition |
| 2014-2023 | Lexus | GX460 | Luxury |
| 2010-2023 | Lexus | GX460 | Premium |
| 2023 | Toyota | 4Runner | 40th Anniversary Edition |
| 2010-2024 | Toyota | 4Runner | SR5 |
| 2018-2024 | Toyota | 4Runner | SR5 Premium |
| 2010-2016,2021-2022 | Toyota | 4Runner | Trail |
| 2017-2024 | Toyota | 4Runner | TRD Off-Road |
| 2018-2024 | Toyota | 4Runner | TRD Off-Road Premium |
| 2015-2024 | Toyota | 4Runner | TRD Pro |
| 2020-2021 | Toyota | 4Runner | Venture |
| 2010-2014 | Toyota | FJ Cruiser | Base |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Product Brochure - a specific brochure describing a ProductInstallation Instructions
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2026 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2026 | GMC | Sierra 1500 | AT4 |
Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.
Product Brochure - a specific brochure describing a ProductInstallation Instructions
Warranty
Catalog
Material Safety Data Sheet
- Large 60mm body for increased oil capacity, cooling, and long-term durability
- 60mm digressive piston improves ride comfort and control over rough terrain
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2023 | Ford | Ranger | Lariat |
| 2019-2023 | Ford | Ranger | XL |
| 2019-2023 | Ford | Ranger | XLT |
BILSTEIN B8 8112 Black Hawk 3-Way adjustable coilovers are direct fit, feature packed solutions for trucks and SUVs. The large 2.65” OD Aluminum shock body paired with a unique finned remote reservoir offers ZoneControl® position sensitive damping in both compression and rebound. Plus, 3 external damping adjustments for high/low speed compression and the internal bump stop provides a wide range of damping option. The ZoneControl® offers a significant advantage by virtually eliminating hard bottoming and keeping the ride buttery smooth over the small stuff. Whether you’re driving rugged trails or paved roads, fully loaded or unloaded, the B8 8112 Black Hawk offers the “best in class” ride experience.
CatalogInstallation Instructions
Product Specifications Sheet
Warranty
Material Safety Data Sheet
Brochure - A general brochure describing a brand, company, product line. If brochure in question is for a specific product, use code PDB.
- Click adjuster knobs allow easy and precise Dual Speed Adjustment of both low and high-speed compression plus an adjustable JCO (internal hydraulic bump stop
- ZoneControl® CR: Position sensitive damping with 3 compression zones and 2 rebound zones, controlled by 3 independent pistons
- Aluminum 2.65" body with finned aluminum remote reservoir for increased oil capacity and cooling
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Toyota | Tundra | 1794 Edition |
| 2022-2026 | Toyota | Tundra | Capstone |
| 2022-2026 | Toyota | Tundra | Limited |
| 2022-2026 | Toyota | Tundra | Platinum |
| 2022-2026 | Toyota | Tundra | SR |
| 2022-2026 | Toyota | Tundra | SR5 |
BILSTEIN B8 8112 Black Hawk 3-Way adjustable coilovers are direct fit, feature packed solutions for trucks and SUVs. The large 2.65” OD Aluminum shock body paired with a unique finned remote reservoir offers ZoneControl® position sensitive damping in both compression and rebound. Plus, 3 external damping adjustments for high/low speed compression and the internal bump stop provides a wide range of damping option. The ZoneControl® offers a significant advantage by virtually eliminating hard bottoming and keeping the ride buttery smooth over the small stuff. Whether you’re driving rugged trails or paved roads, fully loaded or unloaded, the B8 8112 Black Hawk offers the “best in class” ride experience.
WarrantyCatalog
Installation Instructions
Product Specifications Sheet
Brochure - A general brochure describing a brand, company, product line. If brochure in question is for a specific product, use code PDB.
Material Safety Data Sheet
- Click adjuster knobs allow easy and precise Dual Speed Adjustment of both low and high-speed compression plus an adjustable JCO (internal hydraulic bump stop
- ZoneControl® CR: Position sensitive damping with 3 compression zones and 2 rebound zones, controlled by 3 independent pistons
- Aluminum 2.65" body with finned aluminum remote reservoir for increased oil capacity and cooling
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Toyota | Tundra | 1794 Edition |
| 2022-2026 | Toyota | Tundra | Capstone |
| 2022-2026 | Toyota | Tundra | Limited |
| 2022-2026 | Toyota | Tundra | Platinum |
| 2022-2026 | Toyota | Tundra | SR |
| 2022-2026 | Toyota | Tundra | SR5 |
Showing 120/132
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.