Fits 2013-2015 Chevrolet Camaro LS, LT, SS, ZL1, and 2014-2015 Camaro Z/28.

Improve the cornering flat-ness and handling balance of your Fifth-Gen Camaro with the BMR Suspension SB039 front and rear sway bar kit. Designed to significantly increase torsional spring rates over factory units, this kit allows you to effectively control body roll and fine-tune your vehicle's understeer and oversteer characteristics. Unlike hot-formed bars, BMR sway bars are cold-formed from heavy-wall DOM tubing to better resist torsional fatigue and retain their "memory" over years of hard use.

Precision is key in suspension geometry; these bars are CNC-formed for exact tolerances and feature thrust washers welded directly to the bar to prevent lateral movement during high-G cornering. The kit includes 88-durometer, low-deflection polyurethane bushings that are internally fluted to retain grease for quiet, smooth operation. The package is rounded out with reinforced steel mounting brackets designed to minimize deflection under heavy loads.

• Manufacturer Part Number: SB039
• Front Bar: 29mm heavy-wall hollow DOM tubing
• Rear Bar: 32mm heavy-wall hollow DOM tubing
• Finish: Black Hammertone powder coat
• Bushings: 88-durometer fluted polyurethane
• Adjustability: Front and rear adjustable mounting points
• Construction: Cold-formed and CNC-bent for maximum durability
• Includes: Front and rear sway bars, polyurethane bushings, and reinforced mounting hardware

Fits 2009-2013 Subaru Forester X and XT models.

The Bilstein B8 TerraSport lift kit is a precision-engineered suspension solution that provides 1.5 inches of front lift and 1.25 inches of rear lift without the need for traditional lift spacers. Unlike basic spacer blocks that can compromise suspension travel and ride quality, B8 TerraSport dampers feature a higher fixed spring perch and a longer shock body. This design increases ground clearance for larger off-road tires and reduces the risk of undercarriage damage while maintaining superior on-road handling and factory-spec alignment.

This direct-fit kit is tuned specifically for the SH-generation Forester chassis to ensure premium ride quality and safety. By utilizing the vehicle’s factory coil springs and OEM mounting locations, these dampers provide a straightforward installation process that retains original equipment reliability.

• Includes (4) B8 TerraSport dampers and necessary supporting hardware
• 1.5" front and 1.25" rear lift height for improved ground clearance
• Monotube gas pressure technology for consistent, fade-free performance
• Vehicle-specific tuning for optimized handling on and off-road
• Direct-fit installation using factory springs and top mounts
• Eliminates the need for lift spacers

Fits 2014-2017 Subaru Forester (2.0XT / 2.5i).

The Bilstein B8 TerraSport Lift Kit provides a functional suspension upgrade for the 2014-2017 Subaru Forester, delivering 1.75 inches of front lift and 1.5 inches of rear lift. Unlike traditional spacer lifts that can compromise shock travel and performance, this kit features precision-engineered dampers with higher fixed spring perches and elongated bodies. This design increases ground clearance for larger off-road tires and reduces the risk of undercarriage damage without sacrificing on-road handling.

Each kit is tuned specifically for the Forester to ensure factory-spec alignment and premium ride quality. This is a direct-fit solution that utilizes your vehicle's factory coil springs and OEM mounting locations for a straightforward installation.

• Specifically engineered for 2014-2017 Subaru Forester models
• Provides 1.75" front and 1.5" rear lift (application-specific)
• Includes (4) B8 TerraSport dampers and necessary hardware
• Utilizes factory springs and top mounts; no spacers required
• Increased ground clearance and improved off-road capability
• Zinc-plated finish for corrosion resistance

Fits 2013-2017 Subaru XV Crosstrek and Crosstrek models, including Hybrid and Hybrid Touring trims.

The Bilstein B8 TerraSport lift kit provides a 1.5-inch increase in ground clearance without the performance compromises of a traditional spacer lift. Engineered as a direct-fit solution, these dampers feature a higher fixed spring perch and a longer shock body to provide additional height while maintaining factory-spec alignment and superior ride quality. By utilizing your vehicle's factory coil springs and OEM mounting locations, this kit preserves original suspension geometry while offering the travel and damping control needed for technical off-road terrain.

• Provides 1.5 inches of lift for increased undercarriage protection and larger tire clearance
• Damper-based lift technology eliminates the need for strut spacers
• Precision-tuned for the Subaru Crosstrek chassis to improve on-road handling and off-road stability
• Designed to utilize factory coil springs and OE top mounts for a simplified installation
• Includes four (4) B8 TerraSport dampers and all required mounting hardware

Fits 2018-2020 Subaru Crosstrek models (Base, Hybrid, Limited, and Premium).

Bilstein B8 TerraSport Lift Kits provide a functional 1.5-inch suspension lift for your Subaru Crosstrek, increasing ground clearance and improving off-road performance without the drawbacks of basic spacer lifts. Unlike spacers that can compromise ride quality and travel, these B8 TerraSport dampers feature a precision-engineered longer body and a higher fixed spring perch. This design optimizes suspension travel while utilizing your vehicle's factory coil springs and OEM top mounts for a direct-fit installation.

These dampers are valved specifically for the Crosstrek chassis to ensure factory-spec alignment and maintain premium on-road handling characteristics even with the added height. This kit is the ideal solution for enthusiasts looking to fit larger performance off-road tires or reduce the risk of undercarriage damage on technical trails.

• Provides a 1.5-inch suspension lift for increased ground clearance
• Includes (4) B8 TerraSport dampers (front and rear)
• Higher fixed spring perch and longer damper body design
• Maintains factory-spec alignment and safety standards
• Uses original equipment (OE) springs and mounting locations
• Direct-fit installation with all necessary hardware included

Fits select 2019-2025 BMW 330i, 330e, M340i, and 430i xDrive models (Base submodels) equipped with factory electronic suspension.

The Bilstein EVO SE represents the next evolution in performance suspension tuning for vehicles equipped with factory electronic damping control. This kit is a true plug-and-play solution, designed to integrate seamlessly with your BMW's original equipment (OE) systems. By utilizing the factory electronic controls, you maintain the ability to adjust damping characteristics through your vehicle's drive mode settings while gaining the superior handling of a performance coilover.

Each EVO SE kit features high-quality threaded dampers that allow for a customized ride height, offering up to 70mm of lowering. This reduction in center of gravity, combined with specific application tuning tested on the Nürburgring, provides greater stability, improved traction, and higher cornering speeds. Built in Germany, these dampers are double-tested to ensure a more satisfying driving experience than the factory setup.

• Direct-fit, plug-and-play integration with factory electronic damping systems
• Ride height adjustability with up to 70mm of lowering capacity
• High-quality threaded performance dampers for precise tuning
• German-engineered and Nürburgring tested for optimal handling
• Enhanced stability and cornering performance without sacrificing OE electronic functionality

Fits 2015-2016 Volkswagen Golf, Golf R, and Golf SportWagen models equipped with a 50mm outside diameter strut.

Bilstein B14 (PSS) suspension kits provide race-inspired handling and ride height adjustability in a direct-fit, OE-quality package. Engineered for the enthusiast who demands better cornering performance without sacrificing durability, these kits feature monotube gas pressure dampers paired with matched springs specifically tuned for the MK7 chassis. The threaded body design allows you to fine-tune your vehicle's stance for the perfect balance of aesthetics and center-of-gravity management.

Built in Germany and tested on the Nürburgring, the B14 system utilizes Bilstein’s Triple-C-Technology surface coating for exceptional corrosion resistance against road salts and debris. The monotube design ensures consistent, fade-free damping performance under spirited driving conditions.

• Threaded body allows for lowering of approximately 30mm to 50mm
• Monotube gas pressure construction for superior heat dissipation and damping control
• Triple-C-Technology surface coating for long-lasting corrosion resistance
• Zinc-plated strut bodies for durability in harsh environments
• Includes matched performance springs and all necessary hardware for installation
• Engineered and tested under motorsport conditions

Fits 2008-2015 Audi TT, TT Quattro, TT RS Quattro, and TTS Quattro.

The Bilstein B14 (PSS) suspension kit delivers track-inspired performance and an aggressive stance in a direct-fit package. This system features monotube gas-pressure dampers paired with application-specific progressive rate springs, engineered to provide superior handling and control without sacrificing OE-level durability. The zinc-coated threaded body design allows for fine-tuning your vehicle's ride height to achieve the perfect balance between aesthetics and performance.

• Monotube gas pressure construction for consistent, fade-free performance
• Threaded body allows for adjustable lowering of approximately 30mm to 50mm
• Triple-C-Technology surface coating for long-lasting corrosion resistance
• Matched springs and dampers tuned under motorsport conditions on the Nürburgring
• Precision-engineered in Germany

Fits 2014-2026 Ram 2500 4WD models including Big Horn, Laramie, Power Wagon, Rebel, and Tradesman.

The Bilstein B8 5112 suspension kit is a high-performance leveling solution designed to provide increased ground clearance, accommodate larger tire diameters, and improve wheel travel for heavy-duty applications. This kit replaces the factory front components with a matched system engineered specifically for the Ram 2500 chassis, ensuring a stable and controlled ride on varied terrain.

This suspension system consists of two B8 5100 series gas-pressurized shock absorbers paired with two vehicle-specific matched coil springs. The 46mm monotube design provides consistent, fade-free damping by effectively dissipating heat during extended use. Utilizing patented digressive valving, the shocks instantly adapt to changing surface conditions to maintain traction and comfort. This kit is a direct bolt-on installation into factory mounting locations with no modifications required.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Patented digressive valving reacts instantly to changing surface conditions
• Includes (2) B8 5100 shock absorbers and (2) matched front coil springs
• Vehicle-specific ride tuning for optimized handling and stability
• Increases ground clearance and allows for larger wheel and tire packages
• Direct bolt-in fitment using factory mounting points

Fits select 2006-2021 Volkswagen Passat and CC models (2.0T).

Bilstein B6 Performance dampers are the ideal upgrade for drivers seeking improved handling and stability without the need to replace their factory coil springs. Specifically engineered to be paired with OE springs, these struts utilize application-specific valve settings and a 36mm monotube design to provide superior damping control compared to standard twin-tube units. The result is a significant increase in lane stability, road grip, and safety during both daily commutes and emergency maneuvers.

Constructed with Bilstein's signature gas-pressure technology, these dampers prevent the oil from foaming under heat and stress, ensuring consistent performance. The monotube design allows for a larger piston surface area, which translates to more precise response and better heat dissipation for a long-lasting service life on your Volkswagen.

• Series: B6 Performance
• Position: Front
• Internal Design: Monotube
• Diameter: 36mm
• Compatible with factory series springs
• Vehicle-specific ride tuning and valving
• Maintains original ride height while improving damping

Fits select 1965-1989 Porsche 911, 912, and 930 models.

The Bilstein B6 Performance damper is a gas-pressure monotube upgrade engineered specifically to be paired with your Porsche's factory springs. Unlike generic replacement shocks, these dampers feature application-specific valve settings designed to enhance handling and lane stability without requiring the installation of lowering springs or modified suspension geometry.

The 36mm monotube design provides consistent, fade-free performance by keeping the oil under pressure, preventing aeration and ensuring the damper maintains its characteristics even under extreme driving conditions. This strut assembly replaces the front right unit, delivering optimum grip and improved safety for both daily driving and spirited use.

• Bore Size: 36mm
• Design: Monotube Gas-Pressure
• Orientation: Front Right
• Valving: Application-specific ride tuning
• Compatibility: Designed for use with OE factory springs
• Finish: Signature Bilstein Yellow

Fits 2023-2026 Chevrolet Colorado Trail Boss and GMC Canyon AT4, Denali, and Elevation.

Bilstein B8 5100 shock absorbers are engineered as a direct-fit solution for lifted trucks, providing the control and durability required for off-road environments and highway stability. Featuring a 46mm monotube design, these shocks provide consistent, fade-free performance by effectively dissipating heat during heavy cycling. The patented velocity-sensitive, digressive piston reacts instantly to changing surface conditions, improving ride quality and handling on both 2023-2026 Colorado and Canyon platforms.

• 46mm monotube construction ensures consistent performance in all conditions
• Patented digressive valving reacts immediately to road inputs for better vehicle control
• Vehicle-specific tuning optimized for the suspension geometry of lifted Colorado and Canyon models
• Direct-fit installation utilizes factory mounting points for a seamless upgrade
• Zinc-plated finish for enhanced durability and corrosion resistance

Fits 2013-2020 Ford Fusion, including Energi, Hybrid, S, SE, SEL, Platinum, and Titanium submodels.

Bilstein B6 Performance dampers provide a significant handling upgrade for the Ford Fusion without requiring the installation of aftermarket lowering springs. These rear shocks are engineered to work specifically with factory OE springs, utilizing a monotube gas-pressure design to deliver consistent, fade-free damping performance. Each unit features application-specific valving to optimize lane stability and tire grip during both daily commutes and emergency maneuvers.

• Monotube gas-pressure technology for instant reaction and superior heat dissipation
• Application-specific valve settings tuned for the Ford Fusion chassis
• Maintains factory ride height by utilizing OE springs
• Improved lane stability and traction in all driving conditions
• Rigorous quality testing to meet or exceed OE standards
• Direct-fit bolt-on installation

Fits 2015-2022 Mercedes-Benz C300 and 2015 C400 4Matic models.

The Bilstein B4 OE Replacement (DampMatic) damper is a direct-fit solution designed to restore the sophisticated ride characteristics of your Mercedes-Benz. Unlike standard shocks, DampMatic technology utilizes a passive, amplitude-selective damping system that adjusts automatically to road conditions without the need for complex electronics. This mechanical valve system ensures a smooth, comfortable ride during normal driving while instantly increasing damping force during more aggressive maneuvers to maintain vehicle stability.

Engineered to meet or exceed original equipment standards, these dampers are the primary choice for maintaining factory handling and safety. By replacing a worn front-left strut with a Bilstein B4 DampMatic unit, you eliminate the compromises of aged suspension, restoring the precise steering response and rolling comfort intended by the manufacturer.

• Brand: Bilstein
• Series: B4 OE Replacement (DampMatic)
• Position: Front Left
• Technology: Passive, amplitude-selective damping adjustment
• Benefits: Automatic damping force reduction for rolling comfort; increased force for enhanced stability
• Fitment Type: Direct OE replacement for 4Matic-equipped models

Fits 2018-2021 Ford EcoSport (S, SE, SES, and Titanium).

The Bilstein B8 Performance Plus is a high-pressure gas monotube shock absorber engineered specifically to be paired with aftermarket lowering springs or factory sport suspensions. While standard dampers can struggle with the altered stroke of a lowered vehicle, the B8 is valved to provide optimum damping control, ensuring the suspension remains composed and responsive under various driving conditions.

Utilizing a monotube design for superior heat dissipation and consistent performance, these dampers are rigorously tested to meet or exceed OE standards. They offer a significant upgrade for drivers looking to improve handling and safety without sacrificing the daily comfort required for a commuter vehicle. The application-specific valving brings out the best in the EcoSport's chassis, providing a sportier feel and more precise steering input.

• Designed specifically for use with lowering spring sets and production sport suspensions
• Monotube pressure technology for fade-free performance
• Application-specific valving enhances handling and vehicle stability
• Replaces worn OE dampers with improved damping characteristics
• Built to meet or exceed original equipment quality standards

Fits 2009-2023 Jaguar XF (3.0L).

Bilstein B4 OE Replacement dampers are specifically engineered to restore the original ride quality and handling of your Jaguar XF. These shock absorbers are designed to meet or exceed factory standards, making them the ideal choice for drivers looking to maintain the precise driving dynamics and comfort the vehicle had when new. Utilizing gas-pressure technology, the B4 series provides consistent damping performance and high power reserves to ensure safety and stability across all road conditions.

• Restores original driving comfort, handling, and safety characteristics
• Precision construction ensures a direct fit to factory mounting points
• High power reserves for maximum safety under various loads
• Meets or exceeds OE quality and performance standards
• Engineered for the X250 chassis with passive suspension

Fits select 2005-2012 Porsche 911 (Carrera, Carrera S, Carrera GTS, and Speedster) models equipped with PASM.

Bilstein B4 OE Replacement DampTronic dampers are designed as direct replacements for the factory-installed electronically adjustable suspension components found on many high-performance European vehicles. These front twin-tube shocks are specifically engineered to integrate with your vehicle's Porsche Active Suspension Management (PASM) system, ensuring the original balance of performance, safety, and ride comfort is fully restored. By meeting or exceeding OE standards, Bilstein provides a solution that maintains the precise handling characteristics your 911 had the day it left the factory.

• Direct OE replacement for Porsche 911 models with PASM electronic suspension
• Twin-tube gas pressure design for consistent, fade-free damping
• Engineered to maintain original driving comfort and high power reserves
• Seamless integration with factory DampTronic electronic adjustment
• Restores factory-specified safety and handling dynamics
• Front position fitment

Fits 2014-2019 Mercedes-Benz CLA250 (Base, 4Matic) and 2015-2019 CLA45 AMG 4Matic.

Bilstein B4 OE Replacement dampers are engineered to restore the original ride quality, handling, and safety of your Mercedes-Benz. These twintube struts are built to meet or exceed original equipment standards, providing high power reserves and precise construction to ensure consistent performance under various driving conditions. As a direct-fit replacement for the factory front right position, these dampers eliminate the floaty handling and harsh impacts associated with worn-out factory suspension components.

• Restores original driving comfort, handling, and safety characteristics
• Twintube gas-pressure design for consistent damping force
• High power reserves for maximum safety under load
• Precise OE-quality construction and materials
• Direct-fit installation to factory mounting points

Bilstein B1 Shock Oil is a professional-grade hydraulic fluid engineered specifically for the maintenance and rebuilding of high-performance dampers. This fluid is formulated to maintain consistent damping characteristics across a broad range of operating temperatures, ensuring your suspension performs reliably from a cold start to high-heat technical driving.

• Optimized for Bilstein dampers and high-performance shock absorbers
• Advanced anti-foaming additives prevent aeration during rapid piston cycling
• Maintains stable viscosity for consistent valving response
• Formulated to protect internal seals and reduce friction for smoother travel
• Quantity: 1 Gallon (3.79 Liters)
• Manufacturer Part Number: B1 Shock Oil

Fits 2017-2023 Alfa Romeo Giulia (Base, Estrema, Sport, Sprint, and TI).

Bilstein B6 Performance dampers are a precision-engineered upgrade for the Alfa Romeo Giulia chassis, specifically designed to be paired with the original equipment (OE) factory springs. These dampers replace the worn or soft factory front left shock with a high-pressure gas damper valved for improved vehicle dynamics and lane stability. By retaining the factory ride height while increasing damping control, the B6 series provides a significant handling advantage for daily driving and performance maneuvers without the need for a full suspension overhaul.

• Monotube gas-pressure technology for consistent, fade-free performance.
• Application-specific valving tuned to the Alfa Romeo Giulia's weight and suspension geometry.
• Direct fitment to front left factory mounting points.
• Engineered for optimum grip and enhanced stability in both routine and extreme driving conditions.
• Designed to meet or exceed OE standards for durability and safety.

Fits 2011-2017 Jeep Compass and Patriot models, including Sport, Latitude, and Limited trims.

Bilstein B4 OE Replacement dampers are specifically engineered to restore your vehicle's original ride quality, handling, and safety. Designed to meet or exceed original equipment standards, these rear twintube shock absorbers provide a direct bolt-on solution for drivers looking to maintain factory performance. By utilizing gas-pressure technology and precision valving, the B4 series offers high power reserves to ensure consistent control under various driving conditions.

• Twintube gas-pressure design for consistent damping performance
• Restores original driving comfort and vehicle stability
• Manufactured to meet or exceed OE quality and specifications
• Direct fit replacement for factory rear shock absorbers
• Finished in durable Bilstein black paint

Fits 2017-2025 Audi Q7 Premium, Premium Plus, and Prestige models.

Bilstein B4 OE Replacement dampers are specifically engineered to restore the original ride quality, handling, and safety of your vehicle. These gas-pressure shocks are designed to meet or exceed factory standards, providing the consistent damping performance needed to maintain vehicle stability under various road conditions. By replacing worn factory dampers with the B4 series, you restore the original performance and high power reserves required for maximum driving comfort.

• Series: B4 OE Replacement
• Position: Rear
• Gas-pressure technology ensures constant damping power under load
• Restores original driving comfort and handling characteristics
• Engineered to meet or exceed OE quality and specifications
• Direct-fit replacement for original equipment dampers

Fits 2007-2018 Dodge, Freightliner, and Mercedes-Benz Sprinter 2500 and 3500.

Bilstein B4 OE Replacement dampers are engineered to restore your vehicle's original ride quality, handling, and safety. These shocks utilize twintube gas pressure technology to provide consistent damping performance that meets or exceeds factory standards. Designed as a direct bolt-on solution, they are the ideal choice for high-mileage Sprinter vans requiring refreshed suspension stability without altering original chassis dynamics.

• Restores original driving comfort, handling precision, and safety
• Twin-tube gas pressure design for consistent performance
• High power reserves for maximum safety under heavy load conditions
• Built to precise OE dimensions for straightforward installation
• Proven Bilstein quality and durability

Vehicle Fitment:

Fits 2002-2007 Chevrolet Trailblazer SS.

The Belltech Street Performance rear shock absorber is engineered to provide the perfect balance between ride comfort and high-speed handling for your SUV. Designed specifically for the demands of the Trailblazer SS chassis, these shocks improve stability and control by utilizing precision-tuned low-speed compression and high-speed rebound damping.

• Replaces the factory rear shock absorber to restore and improve handling performance
• Large diameter shock body for increased oil capacity and thermal stability
• Tuned specifically for the weight and geometry of the Chevrolet Trailblazer SS
• Bolts directly to factory mounting locations for a straightforward installation

Belltech Street Performance shock absorbers are engineered to provide a balanced ride, offering increased handling capabilities without sacrificing daily comfort. These dampers are specifically tuned to manage the weight and dynamics of trucks and SUVs, reducing body roll and improving stability during cornering and lane changes. Designed as a performance-oriented upgrade, they offer a more controlled feel compared to standard factory equipment.

• Twin-tube internal design ensures consistent damping response across various road surfaces.
• Heavy-duty seals and high-quality bushings provide extended service life under demanding conditions.
• Precision-tuned valving provides a firm yet compliant ride quality for sport truck applications.
• Direct-fit construction allows for a straightforward installation as a replacement for worn OE dampers.

AST Suspension Adjustable Lowering Springs (ALS) provide a customizable suspension solution for the BMW X3M (F97) and X4M (F98). This kit replaces the factory spring seats with threaded adjusters, allowing you to fine-tune your vehicle's ride height and stance while retaining the factory electronic damping system.

Designed to lower the center of gravity, these springs reduce body roll and improve cornering stability without compromising ride quality. These adjustable springs are an ideal upgrade for drivers seeking the aesthetic benefits of a lowered vehicle with the functional flexibility of height adjustment typically found in coilover systems.

• Threaded collars for precise front and rear ride height adjustment
• Specifically engineered for BMW X3M (F97) and X4M (F98) chassis
• Compatible with OE electronic dampers to maintain factory suspension modes
• Reduces wheel gap for a more aggressive, performance-oriented appearance
• Improves handling characteristics by lowering the center of gravity

Fits 2020-2024 BMW X5M (F95) and X6M (F96) models.

AST Suspension adjustable lowering springs provide the ultimate solution for owners who want to dial in a custom ride height without sacrificing the factory Electronic Damper Control (EDC). These kits utilize threaded perches that bolt onto your original BMW dampers, effectively converting your setup into an adjustable height system. This design allows you to lower the center of gravity for improved cornering performance and reduced body roll while maintaining the ride quality and adaptive functionality of the OEM suspension.

• Adjustable ride height for precise wheel-to-fender gap fitment
• Cold-wound spring technology ensures long-term resistance to sagging
• Fully compatible with factory BMW EDC and active suspension systems
• Developed and tested specifically for the F95 X5M and F96 X6M chassis
• Includes threaded height adjusters and hardware for a complete installation

The ARB BP-51 Spring Compressor Tool is a specialized service instrument engineered specifically for the maintenance and adjustment of Old Man Emu BP-51 high-performance bypass shock absorbers. This tool provides the necessary leverage and stability to safely compress high-rate coil springs, allowing for precise preload adjustments or complete shock disassembly for servicing.

• Designed specifically for ARB Old Man Emu BP-51 bypass shock assemblies
• Enables safe compression of coil springs for preload adjustment or rebuilds
• Heavy-duty construction to handle high-tension off-road springs
• Essential for technicians and owners performing suspension tuning or maintenance
• Manufacturer Part Number: BP-TOOL

This ARB fitting kit provides the specialized mounting hardware required to install Old Man Emu BP-51 bypass shock absorbers on the Toyota Land Cruiser Prado 250. Because BP-51 shocks feature external reservoirs and specific bypass tubes, they require precise bracketry to ensure clearance from suspension components and chassis rails throughout the full range of articulation.

Engineered for a direct-fit installation, this kit includes vehicle-specific brackets and high-grade fasteners designed to withstand the stresses of heavy off-road use. It eliminates the need for custom fabrication, ensuring your internal bypass suspension is positioned correctly for optimal cooling and performance.

• Engineered specifically for Toyota Land Cruiser Prado 250 applications
• Required for the installation of Old Man Emu BP-51 internal bypass shocks
• Includes all necessary mounting brackets, spacers, and hardware
• Durable finish for corrosion resistance in harsh environments
• Ensures proper clearance for reservoir hoses and bypass tubes

Fits Toyota Land Cruiser Prado 250 models. This ARB BP-51 Fit Kit provides the specialized mounting brackets and hardware required to install OME BP-51 Internal Bypass Shock Absorbers to the front of your vehicle.

Designed specifically for the Prado 250 chassis, this kit ensures that the high-performance bypass shocks are securely mounted to factory-style points, maintaining proper clearances and suspension geometry under extreme off-road conditions. All components are engineered for durability and corrosion resistance to match the lifespan of your BP-51 dampers.

• Required for front installation of ARB BP-51 shock absorbers
• Vehicle-specific design for the Toyota Land Cruiser Prado 250
• Includes all necessary mounting brackets and hardware
• Durable, corrosion-resistant finish for long-term reliability
• Bolt-on installation using factory mounting locations