Fits 2019-2023 Ram 3500 4x4 trucks.

These Carli Suspension rear lift blocks provide a precise 1-inch increase in rear ride height, allowing you to fine-tune your heavy-duty truck's stance. Whether you are looking to compensate for a front-end leveling kit or need additional clearance for larger tire packages, these blocks offer a reliable solution for adjusting the rear rake of your Ram 3500. Designed for the 4x4 platform, they install directly onto the rear axle to provide consistent lift without compromising the vehicle's heavy-duty hauling capabilities.

• Provides 1 inch of rear lift
• Designed specifically for the 2019-2023 Ram 3500 4x4 platform
• Ideal for leveling or adjusting rear-end rake
• Maintains factory-style suspension geometry
• Sold as a pair for a complete rear axle installation

Fits 2014-2023 Ram 2500 4x4 models equipped with factory Rear Auto-Level Air Suspension and approximately 3.25 inches of rear lift.

When lifting a Ram 2500 with factory air ride, maintaining the correct spatial relationship between the axle and the frame is critical for suspension longevity. These Carli Rear Bumpstop Drops relocate the factory bumpstops downward, ensuring they engage before the air bags or shocks reach full compression. This protects your suspension components from damage during heavy towing or off-road cycles by providing a mechanical stop at the appropriate travel point.

• Engineered specifically for 3.25-inch rear lift heights
• Compatible with factory Rear Auto-Level Air Suspension systems
• Heavy-duty construction to withstand hard bottom-out forced
• Relocates bumpstop to prevent air bag and shock over-compression
• Designed for 4x4 Ram 2500 applications

Fits select 2014-2023 Ram 2500 4x4 models equipped with factory Rear Auto-Leveling Air Suspension.

When leveling or lifting a Ram 2500 with factory air ride, the distance between the axle and the frame is increased. These Carli Suspension Rear Bumpstop Drops restore the proper spacing between the axle and the bumpstop, ensuring the suspension correctly limits travel before the air bags or shocks reach their mechanical limits. This correction is essential for maintaining the longevity of your factory air suspension components and preventing damage during heavy compression.

• Designed specifically for Ram 2500 4x4 trucks with factory rear air ride
• Corrects bumpstop engagement points after leveling or lifting the vehicle
• Protects factory air bags and shocks from over-extension or bottoming out
• Maintains factory-intended compression travel and ride quality
• Direct bolt-on installation using existing mounting points

Fits 2003-2009 Dodge Ram 2500 and 3500 4x4 Diesel models.

Correct your suspension geometry and restore driveability on your lifted heavy-duty Ram with Carli Suspension 6-inch Radius Arms. When lifting a truck to 6 inches, the factory control arm angles become steep, often leading to a harsh ride and erratic handling. These radius arms replace the stock four-link setup, providing a longer pivot point that flattens the suspension cycle and improves axle tracking through the entire range of travel.

Engineered for maximum strength and tire clearance, these arms allow for the use of larger tires without the rubbing common on factory components. Each set is built to handle the torque of the Cummins turbodiesel engine and the rigors of off-road use, ensuring your front axle remains centered and your caster is properly set for high-speed stability.

• Designed specifically for 6-inch suspension lifts
• Improves caster and front-end geometry for better handling
• Heavy-duty construction replaces weak factory stamped steel arms
• Increased tire clearance for oversized wheel and tire packages
• Ships crated to ensure components arrive without finish damage

Fits 2003-2012 Ram 2500/3500 4x4.

Carli Radius Arm Frame Drop Brackets are engineered for heavy-duty Ram trucks equipped with a 6-inch lift. By lowering the mounting point of the radius arms, these brackets correct the suspension geometry that is altered during the lifting process. Restoring the proper pivot point helps maintain optimal caster settings and improves overall ride quality by reducing the harshness often associated with steep control arm angles.

• Designed specifically for 6-inch suspension lifts
• Corrects radius arm geometry and restores caster
• Heavy-duty steel construction for maximum durability
• Bolts to factory frame locations
• Compatible with 2003-2012 Ram 2500 and 3500 4WD models

Fits 2014-2023 Ram 2500 models equipped with coil spring rear suspension.

The Carli Pintop 2.5 Shock Package is engineered to transform the heavy-duty Ram 2500 platform, delivering a significant increase in off-road damping capacity without compromising daily street manners. This system utilizes King 2.5-inch diameter shocks featuring Carli's proprietary 5-port piston and custom-tuned valving specifically calibrated to manage the unsprung weight of the Ram's axles across varied terrain.

Built for long-term durability in harsh environments, these shocks are constructed with 17-4 stainless steel shafts that resist pitting and corrosion better than standard chrome plating. The front shocks utilize remote reservoirs for maximum heat dissipation, while the rear shocks feature a piggyback reservoir design for compact, reliable performance. This set is designed specifically for vehicles with a 2.5-inch leveling lift height.

• King 2.5-inch remote reservoir front shocks
• King 2.5-inch piggyback reservoir rear shocks
• Carli custom-tuned valving with proprietary 5-port piston
• Corrosion-resistant 17-4 stainless steel shock shafts
• Includes reservoir mounts and front limiting straps

Fits 2014-2023 Ram 2500 4x4 Diesel models with a 3-inch lift height.

The Carli Pintop 2.5 Shock Package is engineered to bridge the gap between daily street driving and aggressive off-road use. By utilizing a robust 2.5-inch diameter shock body, this system provides significantly more oil volume and cooling surface than standard shocks, effectively managing heat during sustained cycles in rough terrain. Each shock features Carli’s custom-tuned valving and is built with 17-4 stainless steel shock shafts for maximum corrosion resistance and durability in harsh environments.

This kit is designed for Ram owners looking for substantial gains in suspension travel and damping control without sacrificing highway manners. The remote reservoir design ensures consistent performance by keeping the nitrogen charge separate from the oil, preventing cavitation and fade. Please note: this set is designed specifically for 3-inch lifted applications and is not compatible with factory air ride rear suspension or 2.5-inch leveled trucks.

• Fits 2014-2023 Ram 2500 4x4 Diesel models
• Custom-tuned Pintop 2.5-inch remote reservoir shocks
• Corrosion-resistant 17-4 stainless steel shock shafts
• Includes Carli reservoir mounting hardware
• Includes rear brake line relocation bracket
• Optimized for vehicles with a 3-inch lift

Fits select 2014-2023 Ram 2500 and Power Wagon 4x4 models with 3.25-inch lift and gas engines (Hemi).

The Carli Pintop 2.5 shock system is engineered to solve the ride quality and control issues common in heavy-duty 3/4-ton platforms. These shocks feature a large 2.5-inch diameter body, providing 55% more piston surface area than standard 2.0-inch shocks. This increased volume, combined with Carli-specific blueprinted valving and a custom-designed piston, ensures proper oil flow rates to manage the mass of a Ram 2500 both on-road and in demanding off-road environments.

Constructed for longevity in harsh conditions, these shocks utilize shafts machined and polished from solid 17-4 stainless steel to resist pitting and corrosion. The remote reservoir design increases oil capacity for superior heat dissipation, preventing fade during extended use. This set provides a significant increase in suspension travel while maintaining the refined handling required for a daily driver.

• Fits 2014-2023 Ram 2500/Power Wagon 4x4 Gas models with 3.25-inch lift
• 2.5-inch diameter shock bodies with remote reservoirs
• 17-4 stainless steel shock shafts for maximum durability
• Carli-specific custom tuned valving
• Includes front and rear shocks plus e-brake cable brackets

Fits 2014-2023 Ram 2500 4X4 models across all trim levels including Power Wagon, Laramie, and Tradesman.

The Carli Backcountry 2.0 shock system is engineered for the heavy-duty truck owner who demands a refined on-road ride without sacrificing dirt-road capability. This package bridges the gap between basic street leveling kits and full-race suspension systems, providing a significant upgrade in damping control for 8,500lb trucks. These Carli-spec 2.0 shocks feature proprietary internal tuning specifically calibrated to maintain a plush feel over highway expansion joints while managing the high-energy impacts of off-road terrain.

Equipped with remote reservoirs, these shocks offer increased oil capacity for better heat dissipation during sustained use. For those seeking the ultimate in-road manners, this package performs at its peak when paired with a torsion sway bar. The system is a direct-fit leveling solution that provides a significant increase in suspension articulation over factory components.

• Carli Spec 2.0 shocks with external remote reservoirs
• Proprietary tuning for balanced on-road comfort and off-road control
• 9.5 inches of front wheel travel
• 11.3 inches of rear wheel travel
• Includes vehicle-specific Carli reservoir mounting brackets
• Designed for 2014-2023 Ram 2500 4WD applications

Fits 2014-2025 Ram 2500 models equipped with rear coil springs across all trim levels, including Power Wagon and Rebel.

The Carli Suspension Base Leveling System is engineered to eliminate the factory rake while significantly improving ride quality. Unlike spacer kits that maintain or degrade factory ride characteristics, this system uses custom-tuned components to enhance comfort during daily commuting, highway cruising, and heavy towing or hauling. The 2.5-inch lift provides the necessary clearance for larger tires while maintaining proper suspension geometry.

This comprehensive kit features corrosion-resistant aluminum shock bodies that provide excellent heat dissipation and durability in harsh environments. The included multi-rate front coil springs are specifically tuned for the Ram 2500 platform to provide a supple initial stroke for small bumps while maintaining support for larger impacts. The system increases wheel travel to 9.5 inches at both the front and rear, offering a more capable and controlled driving experience.

• Linear-rate front coil springs for improved small-bump compliance
• Front and rear shock package with corrosion-resistant aluminum bodies
• Adjustable track bar to properly center the front axle at the new ride height
• Increases wheel travel to 9.5" front and 9.5" rear
• Designed specifically for coil-spring rear suspension models

Fits 2013-2023 Ram 3500 Diesel 4X4 (Select submodels including Big Horn, Laramie, Limited, and Tradesman).

The Carli Leveling Suspension System is engineered to eliminate the factory rake and improve the ride quality of your heavy-duty Ram. This Base system provides 2.5 inches of front lift, leveling the stance while significantly enhancing suspension cycling. Custom-tuned for all-around performance, these components are optimized for highway comfort, daily commuting, and heavy towing or hauling duties.

This kit replaces the harsh factory front springs with multi-rate coils and includes an adjustable track bar to ensure the front axle remains properly centered after lifting. The included aluminum body shocks are highly corrosion-resistant and specifically valved for the weight of the Ram diesel platform. This system increases wheel travel to 9.5 inches in the front and 11.3 inches in the rear, providing enough clearance for 35-inch tires.

• Multi-rate front coil springs for superior small-bump compliance
• Corrosion-resistant aluminum body front and rear shock package
• Adjustable track bar to correct axle geometry
• Increased wheel travel: 9.5" front / 11.3" rear
• Clears up to 35" tires

Included Hardware: Multi-rate front coil springs, front and rear shock set, and adjustable track bar.

Fits 2014-2025 Ram 2500 4x4 models (excluding trucks with factory rear air ride). The Carli Backcountry 2.0 Leveling System provides a 2.5-inch front lift to level your truck's stance while significantly improving ride quality on and off the pavement.

This system replaces the factory front coils with multi-rate springs designed to improve small-bump compliance without sacrificing towing or hauling capacity. To manage the increased 9.5 inches of wheel travel, the kit includes a custom-tuned front and rear shock package and a heavy-duty adjustable track bar. The track bar is essential for correcting the front axle geometry, ensuring it remains centered under the frame after the lift is installed. This configuration allows for the fitment of 35-inch tires.

• Provides 2.5 inches of front lift to level the vehicle
• Increases wheel travel to 9.5 inches front and 9.5 inches rear
• Multi-rate front coil springs improve ride comfort and articulation
• Custom-tuned front and rear shock package specifically valved for the Ram 2500
• Adjustable track bar corrects axle alignment and centers the front end
• Clears up to 35-inch tires
• Note: Not compatible with factory rear air ride systems

Fits select 2019-2023 Ram 2500 and 3500 4x4 models, including Power Wagon and Rebel.

The Carli Stainless High-Mount Steering Stabilizer is engineered to minimize resonation transfer from road obstacles to the front-end assembly, providing a confident and balanced feel during cornering. This component is critical for combatting handling issues such as "Death Wobble" and correcting right-hand tire pull common in heavy-duty solid-axle trucks. Unlike many aftermarket units that mount in front of the lower steering linkage, this kit bolts into a protected factory location to prevent trail damage.

Constructed for the harshest off-road environments, the stabilizer features a corrosion-resistant stainless-steel body, a hardened nitride shaft, and precision bearings. The custom valve profile is specifically tuned to improve control of larger aftermarket wheel and tire combinations. The unit is fully rebuildable and features an adjustable design, allowing drivers to fine-tune steering feedback to their preference.

• 3/16-inch gusseted rolled steel mounting bracket for high-clearance installation
• Hardened nitride shaft and stainless-steel body construction
• Custom valve profile optimized for oversized wheel and tire packages
• Adjustable internal pressure to compensate for right-hand tire pull
• Fully rebuildable internal components for long-term serviceability
• Can be combined with a low-mount stabilizer for maximum opposing stabilization
• Simple bolt-in installation with no drilling required

Fits 2019-2023 Ram 2500 and 3500 4x4 trucks.

This Carli High Mount Steering Stabilizer Hardware Kit provides the necessary mounting components to securely install or refresh your high-mount steering stabilizer setup. Engineered specifically for the heavy-duty Ram platform, this kit ensures your steering stabilizer is mounted at the optimal geometry to effectively damp steering feedback and eliminate shimmy. Whether you are replacing worn-out hardware or performing a fresh installation, these components are designed to withstand the vibration and load demands of both highway driving and off-road use.

• Fits 2019-2023 Ram 2500/3500 4x4 models
• Specific for high-mount steering stabilizer configurations
• High-strength hardware designed for heavy-duty steering loads
• Replaces original Carli high-mount installation hardware

Fits 2014-2018 Ram 2500 and 3500 4x4 models.

The Carli Suspension High Mount Steering Stabilizer Hardware Kit provides a robust, high-clearance mounting solution for your truck's steering dampening system. This kit allows you to position the stabilizer above the tie rod, protecting the shock body from trail debris and off-road obstacles while maintaining the necessary geometry to help eliminate steering pull and front-end shimmy.

• Direct fit for 2014-2018 Ram 2500/3500 4WD heavy-duty trucks.
• Includes heavy-duty mounting brackets and all required installation hardware.
• Positions the stabilizer in a protected, high-mount location for maximum ground clearance.
• Engineered to work seamlessly with Carli-specific high-mount steering stabilizers.
• Durable construction designed to withstand harsh road conditions and off-road use.

Fits 2013-2023 Ram 3500 4x4 trucks.

This Carli Suspension bushing kit is specifically engineered for use with their Full Progressive Leaf Spring packs. Designed to replace worn components or complete a new installation, these bushings provide the durable, low-friction pivot points required to maintain the ride quality and increased articulation of a progressive spring setup. These heavy-duty bushings ensure your rear suspension operates smoothly under load while maintaining precise axle alignment.

• Designed specifically for Carli Full Progressive Leaf Springs
• Direct replacement for worn or damaged leaf spring bushings
• High-quality construction for long-term durability in heavy-duty applications
• Compatible with 2013-2023 Ram 3500 4x4 models
• Series: Alas

Fits 2013-2023 Ram 3500 4x4 models equipped with Carli Full Progressive Leaf Spring packs.

Maintaining the performance of a high-travel suspension system requires periodic inspection of wear items. This Carli Suspension Bushing Kit is a direct replacement for the bushings found in Carli Full Progressive Leaf Springs. Over years of heavy hauling, towing, and off-road cycling, original bushings can degrade, leading to increased NVH (noise, vibration, and harshness) and loose axle control. This kit allows you to refresh your leaf pack to its original specifications, ensuring quiet operation and proper suspension geometry.

• Specifically engineered for Carli Full Progressive Leaf Spring packs
• Direct replacement for worn or squeaking leaf spring bushings
• Restores factory-level NVH characteristics and axle stability
• Includes all necessary bushings for a full leaf pack refresh
• Heavy-duty construction designed to withstand high-stress cycles

Fits 2003-2009 Dodge Ram 2500 and 3500 4WD trucks equipped with Carli Full Progressive Leaf Springs.

Restore the ride quality and isolation of your rear suspension with this complete service kit from Carli Suspension. Designed specifically for their Full Progressive Leaf Spring packs, these replacement bushings address the degradation caused by heavy towing, high-mileage commuting, and off-road articulation. Replacing worn bushings eliminates unwanted play and reduces NVH (noise, vibration, and harshness) to keep your heavy-duty Ram handling as intended.

• Direct replacement for bushings in Carli Full Progressive Leaf Spring packs
• Engineered to maintain proper suspension geometry and cycling
• High-durability construction to withstand heavy loads and environmental debris
• Complete kit provides a full refresh for the rear leaf spring main eyes and shackles

Fits select 2019-2023 Ram 3500 4x4 (Diesel models with 4.25in axle tube).

Carli two-stage progressive rate leaf springs deliver a precise balance between heavy-duty cargo capacity and refined ride quality. These full-length leaf packs are custom-built by Deaver Spring to Carli’s specific tolerances, replacing the stiff factory leaf stack to soften the initial spring rate. This design significantly improves small-bump compliance while maintaining a slight rear-high stance when paired with Carli 3-inch front suspension systems.

Engineered for performance, these springs are capable of up to 15 inches of suspension travel when utilized with the factory shackle. The increased leaf count and thinner material help minimize axle wrap and wheel hop, providing more consistent traction. Note that installing this kit reduces the rear payload capacity to a "light" 3/4-ton rating to achieve the improved ride characteristics.

• Provides 2 inches of rear lift
• Full-length progressive leaf packs manufactured by Deaver Spring
• Compatible with 2019-2023 Ram 3500 4x4 Diesel with 4.25-inch axle tubes
• Supports up to 15 inches of suspension travel
• Reduces rear payload to a light 3/4-ton capacity
• Includes all necessary replacement U-bolts for installation

Fits 2013-2018 Ram 3500 4x4 Diesel models without factory air ride.

Carli Suspension's full-length progressive leaf springs, manufactured specifically for Carli by Deaver Spring Mfg, are engineered to transform the heavy-duty ride of the Ram 3500. By replacing the stiff factory leaf pack with a high-count, progressive-rate design, these springs significantly soften the initial spring rate at ride height, providing a much-needed improvement in street comfort and off-road compliance. This kit provides 2 inches of rear lift, perfectly leveling the vehicle's stance when paired with a Carli 3-inch front suspension system.

These springs are designed for maximum performance, capable of up to 15 inches of suspension travel when used with the factory shackle and properly tuned shocks. Beyond ride quality, the progressive architecture helps minimize axle wrap and wheel hop during acceleration. Note that these springs are designed for ride quality and will reduce the vehicle's effective payload capacity to a "light" 3/4-ton rating.

• Provides 2 inches of rear lift (maintains slight rear-high rake with Carli 3" front systems)
• Full-length progressive design manufactured by Deaver Spring Mfg
• Capable of 15" of suspension travel with factory shackle
• Minimizes axle wrap and wheel hop
• Softens initial spring rate for superior damping and comfort
• Fits 4x4 Diesel models ONLY; excludes models with factory Air Ride

Fits 2003-2009 Dodge Ram 2500 and 3500 (Diesel).

Carli two-stage progressive rate leaf springs deliver a precision balance between heavy-duty cargo capacity and refined ride quality. These full-length packs are manufactured by Deaver Spring to Carli’s strict specifications, specifically designed to eliminate the harshness of factory spring rates on the Dodge diesel platform.

This kit provides 2 inches of rear lift, which maintains a slight rear-high stance when used with Carli 3-inch front suspension systems. Beyond the height adjustment, these springs are engineered to minimize axle wrap and wheel hop while softening the initial spring rate at ride height for better small-bump compliance.

• Provides 2 inches of rear lift height
• Capable of 15 inches of suspension travel using factory shackles
• Reduces rear payload to a "light" 3/4-ton capacity for improved ride quality
• Full-length leaf packs manufactured by Deaver Spring
• Minimizes axle wrap and wheel hop during acceleration

Fits select 2013-2023 Ram 2500 and 3500 4x4 models.

The Carli Front End Upgrade Kit addresses the common steering wander and feedback issues inherent in the heavy-duty Ram platform. By replacing high-deflection factory components with precision-engineered hardware, this kit restores steering tighteness and improves axle alignment. The Carli Adjustable Track Bar (CS-DATB-1419) utilizes an FK heim joint and bearing to eliminate the play associated with stock rubber bushings, providing a solid connection that allows for precise axle centering. To further refine handling, the Low Mount Stainless Steering Stabilizer (CS-DLMSS-14) reduces vibration and bump-steer. This stabilizer features a corrosion-resistant stainless steel body and adjustable nitrogen pressure, allowing you to tune the damping force to your specific tire setup and driving conditions.

• Carli Adjustable Track Bar (CS-DATB-1419): Includes FK heim joints and bearings to eliminate deflection
• Carli Low Mount Stainless Steering Stabilizer (CS-DLMSS-14): Features adjustable nitrogen pressure for custom tuning
• Reduces steering vibration and road feedback
• Designed for 4x4 Ram 2500/3500 models with factory or leveled suspension
• Direct bolt-on installation using factory mounting points

Fits 2003-2008 Dodge Ram 2500 and 3500 4x4 models equipped with Y-style steering.

The Carli Suspension Front End Upgrade Kit is a targeted solution for steering wander, vibration, and the vague "dead spot" common in early heavy-duty Ram steering systems. By replacing the flexible factory track bar and the underpowered OEM steering damper, this kit restores front-end rigidity and improves handling predictability on the street or off-road.

• Carli Adjustable Track Bar (CS-DATB-03): Built with high-strength materials and featuring a genuine FK heim joint and bearing. This design eliminates the play and deflection inherent in the factory rubber-bushed track bar.
• Stainless Steel Steering Stabilizer (CS-DLMSS-Y): A nitrogen-charged, tunable stabilizer that reduces bump-steer and unwanted oscillation. The stainless steel body provides superior corrosion resistance, and the internal nitrogen pressure can be adjusted by the user to compensate for specific steering pulls or larger tire diameters.
• System Compatibility: Specifically engineered for trucks equipped with Y-style steering linkages.

Vehicle Fitment:

Fits select 2003-2013 Dodge and Ram 2500/3500 4x4 trucks equipped with or upgraded to T-style steering. This Carli Suspension Front End Upgrade Kit is designed to stabilize the front axle and eliminate the steering wander and vibration common in heavy-duty Ram platforms.

By replacing the flexible factory track bar and stock stabilizer, this kit improves steering precision and driver confidence. The components are engineered to withstand the loads of larger tires and off-road use, utilizing high-end spherical bearings and tunable damping to provide a significantly more controlled driving experience.

• Carli Adjustable Track Bar (CS-DATB-03): Replaces the prone-to-wear factory bar with a high-strength unit featuring an FK heim and bearing to eliminate bushing deflection and steering play.
• Carli Stainless Steering Stabilizer (CS-DLMSS-T): Features a stainless steel body for superior corrosion resistance. This nitrogen-charged unit reduces bump-steer and can be tuned by the user via nitrogen pressure adjustments.
• Direct Compatibility: Fits 2009-2013 models with factory T-style steering and 2003-2008 models that have been converted to the T-style steering linkage.

Fits 2014-2023 Ram 2500 4x4 models equipped with factory air ride suspension.

Correct your truck's stance while maintaining the full functionality of your OEM air suspension system. These Carli Suspension leveling spacer blocks are engineered to provide a clean, level look without compromising the load-leveling capabilities or ride quality of the factory air springs. By repositioning the air bags, these spacers ensure the system operates within its intended travel range even after leveling the vehicle, preventing over-extension and maintaining a plush ride.

• Designed specifically for factory air ride-equipped Ram 2500 4x4 trucks
• Maintains factory load-leveling functionality and ride quality
• Durable construction engineered to withstand heavy towing and hauling
• Includes necessary hardware for a direct installation
• Corrects suspension geometry to accommodate larger tire packages and improve aesthetics

Fits 2014-2023 Ram 2500 4x4 models equipped with factory rear air ride suspension.

Lifting a Ram 2500 with factory air suspension requires more than just longer shocks; the rear air bags must be relocated to maintain their proper operating range. These Carli Suspension 3-inch spacers bridge the gap between the axle and the factory airbag, ensuring the bellows are not overextended when the suspension cycles. This maintains the load-leveling functionality and ride quality of your OEM system while accommodating the increased ride height.

• Engineered for 3-inch rear lift applications
• Maintains correct airbag geometry and travel limits
• Heavy-duty steel construction for maximum durability under load
• Bolts directly to factory mounting points for a secure installation
• Designed specifically for Ram 2500 4x4 Factory Air Ride systems

Fits 2016-2023 Ram 3500 trucks equipped with factory Auto Leveling Air Suspension (ALAS).

When lifting or leveling a Ram 3500 with the factory ALAS system, the rear ride height sensors require adjustment to maintain proper suspension geometry and bag pressure. These Carli Suspension extended sensor links replace the shorter factory units, allowing the suspension computer to accurately read the vehicle's position at the new, increased height. This ensures the air bags remain properly inflated and the auto-leveling system functions as intended without throwing error codes or causing a harsh ride.

• Specifically designed for 2016-2023 Ram 3500 with factory ALAS
• Corrects ride height sensor geometry on lifted or leveled trucks
• Prevents over-extension of the factory sensor arm
• Durable construction suited for heavy-duty towing and off-road use
• Direct bolt-on replacement for factory sensor links

Fits 2014-2024 Ram 2500 4x4 models equipped with gasoline engines and a 3.25-inch lift height.

The Carli-Spec 2.0 shock package is engineered to deliver the brand's signature ride quality, bridging the gap between factory comfort and off-road performance. These 2.0-inch diameter shocks feature remote reservoirs that increase oil capacity for better heat dissipation and more consistent damping during extended off-road use. Proprietary Carli tuning ensures a refined, supple feel on the street while providing the bottom-out resistance needed for mid-intensity trail use.

This comprehensive kit provides 10 inches of suspension travel at both the front and rear, maximizing articulation and wheel control. While these shocks are designed to work across various configurations, they achieve their best on-road performance when paired with Carli-specific lift springs and a torsion sway bar.

• Vehicle-specific proprietary tuning for 2014-2024 Ram 2500 Gas models
• 2.0-inch shock bodies with remote reservoirs for superior cooling
• Delivers 10 inches of front and rear suspension travel
• Compatible with 3.25-inch lift heights
• Includes Carli-specific reservoir mounting hardware

Correct your suspension geometry and restore factory-like handling on your lifted Super Duty. These Carli Suspension Radius Arm Drop Brackets are specifically engineered for 2005-2016 Ford F-250 and F-350 4x4 trucks equipped with a 4.5-inch suspension lift. By lowering the pivot point of the radius arms, these brackets maintain the proper caster angle, preventing the flighty steering and poor tracking often associated with taller lifts.

• Corrects caster angle for improved directional stability and handling
• Maintains factory radius arm geometry on 4.5-inch suspension lifts
• Heavy-duty steel construction for maximum off-road durability
• Direct bolt-on installation using factory mounting locations
• Compatible with 2005-2016 Ford F250/F350 4x4 models

Fits 2011-2022 Ford F-250 and F-350 Super Duty 4x4 trucks with gas engines and 2.5-inch to 3-inch suspension lifts.

These Carli Custom 2.5 Remote Reservoir Shocks are engineered to provide maximum cooling and damping consistency for heavy-duty Ford trucks. Unlike universal shocks, these are custom-valved by Carli specifically for the weight profile of gas-powered F-250 and F-350 models, ensuring the front end remains compliant without feeling oversprung or harsh. The external reservoirs significantly increase oil capacity and surface area, allowing the shocks to run cooler during high-speed off-road use or while navigating rough terrain under load.

• Large 2.5-inch shock body diameter for increased fluid volume and strength
• External remote reservoirs dissipate heat to prevent shock fade
• Custom-tuned valving specific to Ford gas engine weight distribution
• Optimized for vehicles with 2.5-inch to 3-inch suspension lifts
• Provides improved bottom-out resistance and small-bump compliance