Master the technical nuances of TIG welding titanium with the Ticon Industries Titanium Welding Sample Pack. This practice set is specifically curated for fabricators to dial in their welder settings, argon shielding coverage, and heat management on genuine CP1 titanium before moving to final assembly on high-dollar exhaust or intake components.

Because titanium is highly sensitive to atmospheric contamination, practicing your torch technique and back-purging setup is essential for achieving the straw or purple-colored welds that indicate a strong, uncontaminated joint. This pack provides the material necessary to test pulse settings and travel speeds without risking project-specific tubing.

• Manufacturer Part Number: 100-10000-0001
• Material: CP1 Titanium (Commercially Pure Grade 1)
• Pack Contents: Miscellaneous scraps, including pie cut ends and tubing offcuts
• Usage: TIG welding calibration and metallurgical practice

Fits select 1988-2017 Cadillac Escalade, Chevrolet Silverado/Tahoe/Suburban, and GMC Sierra/Yukon models equipped with an 8.25-inch IFS front differential.

Setting up a front differential correctly requires precise control over carrier bearing preload and ring-and-pinion backlash. The Yukon Gear YT A08 spanner tool is engineered specifically for GM 8.25" IFS housings, allowing you to engage and rotate the threaded side adjusters with ease. This tool replaces the need for makeshift methods, ensuring you can reach the exact torque or position required for a long-lasting gear install.

• Specifically designed for GM 8.25" IFS differentials
• Updated 3-pin design for improved engagement and durability
• Compatible with all production years of the 8.25" IFS housing
• Essential for setting carrier bearing preload and gear backlash
• Manufacturer Part Number: YT A08

Precision engine assembly requires the right tools to prevent component damage. The Wiseco 96.0mm Piston Ring Compressor Sleeve (MPN: RCS09600) is engineered to provide a seamless transition for pistons and rings into the cylinder bore. This professional-grade tool eliminates the struggle of manual ring compression, ensuring high-performance oil rings are seated correctly without snagging or breaking.

Each sleeve features a smooth internal radius that tapers precisely down to the 96.0mm bore size. This design compresses the rings evenly around the piston circumference as it is pushed through the tool. To ensure long-term durability and minimal resistance, the sleeve is hard-anodized and finished with a Teflon coating for a low-friction surface.

• Precision Bore: Fixed 96.0mm size for exact fitment
• Material: Hard-anodized aluminum with Teflon coating for reduced friction
• Design: Smooth internal taper for even ring compression
• Ease of Use: Laser-marked size indication for quick identification in the toolbox
• Manufacturer Part Number: RCS09600

The Torque Solution T70 Torx Drain Plug Socket Tool is an essential addition to any Subaru owner's or technician's toolbox. Specifically designed to handle the high-torque requirements of factory drain plugs, this tool ensures a precise fit for removing and installing T70 Torx fasteners found on various Subaru front differentials and manual transmissions.

Constructed for durability and long-term shop use, this socket features a 1/2-inch drive for compatibility with standard ratchets and torque wrenches. Using the correct T70 bit prevents the stripping and rounding of the drain plug, which is common when attempting to use undersized or improvised tools.

• Fits select Subaru models equipped with T70 front differential or transmission drain plugs
• High-strength steel construction for maximum durability
• 1/2-inch drive compatibility
• Essential for routine drivetrain fluid maintenance
• Manufacturer Part Number: TS-TL-709

Fits 2020-2026 Toyota Corolla (including 2023-2026 GR Corolla), Mazda Miata, and select Subaru models.

Protect your vehicle's chassis and pinch welds during maintenance with the PERRIN Jack Pad Set. These pads are designed to provide a secure, flat lifting point for your floor jack, preventing the common bending, paint chipping, or crushing that occurs when lifting directly on factory pinch welds. By distributing the load more effectively, these pads ensure a safer and more stable lift every time you go under the car.

• Provides a solid, flat surface to interface between the jack and the chassis
• Prevents damage to factory pinch welds and underbody coatings
• Machined for a precise fit on specific vehicle jacking points
• Durable black finish for long-lasting corrosion resistance
• Manufacturer Part Number: PSP-BDY-041BK

The Fleece Performance Cummins Crankshaft Barring Tool (FPE-CCBT) is a specialized shop essential designed to simplify engine maintenance. This tool allows for precise, manual rotation of the crankshaft, which is necessary for performing valve lash adjustments, timing the fuel pump, or inspecting internal components. By engaging directly with the factory crank bolts and roll pins, it provides a secure connection that won't slip during use.

Fits select 1994-2018 Dodge Ram 2500 and 3500 models (5.9L / 6.7L).

• Manufactured from durable 1018 steel for maximum service life.
• Yellow zinc plated finish for high-level corrosion resistance in harsh shop environments.
• Accepts a standard 1/2-inch drive ratchet or breaker bar.
• Designed for permanent or temporary use; no need to remove the tool once installed.
• Compatible with factory crankshaft hardware including bolts and roll pins.
• Manufacturer Part Number: FPE-CCBT

The ICON Vehicle Dynamics Nipple Greasing Adapter Kit (MPN 191013) is a specialized maintenance tool designed to facilitate the proper lubrication of recessed or difficult-to-access grease fittings. This kit is essential for servicing suspension components such as rod ends and control arm bushings where a standard grease gun coupler may struggle to form a secure seal.

By providing a precision interface for grease nipples (zerks), this adapter ensures that lubricant is delivered directly into the bearing or bushing surface rather than leaking around the fitting. Regular maintenance using this kit helps prevent premature wear and extends the service life of your high-performance suspension system.

• Provides a secure connection to recessed or specialized grease zerks
• Compatible with most standard grease gun hoses and equipment
• Ensures efficient lubrication of suspension pivot points and bearings
• Manufacturer Part Number: 191013

The Torque Solution 3-inch Turbo Inlet Boost Leak Tester (TS-BLT-3) is a diagnostic tool designed for forced induction systems to identify vacuum and boost leaks across the intake path. By sealing the system at the turbocharger compressor inlet, this tester allows you to pressurize the entire intake tract to detect escaping air from intercooler piping, hose couplers, gaskets, and manifold seals.

• Designed for turbochargers with a 3-inch (76mm) inlet diameter
• Essential for diagnosing power loss, inconsistent air-fuel ratios, and boost lag
• Enables controlled pressure testing of the intake system without running the engine
• Durable construction for repeated shop or trackside use
• Manufacturer Part Number: TS-BLT-3

The Torque Solution Crank Pulley Tool (TS-TL-703) is a precision-engineered specialty tool designed for the safe removal and installation of the crankshaft pulley on Subaru EJ and FA engines. This tool provides a secure method to hold the pulley stationary, preventing the engine from rotating while you apply the high torque required to break loose or tighten the crank bolt.

Essential for timing belt services, front main seal replacements, or aftermarket pulley upgrades, this tool is built to handle professional shop environments. Its design ensures a perfect interface with the pulley to prevent damage to the pulley ribs or the crankshaft, allowing for a more efficient and safer service procedure.

• Fits Subaru EJ and FA series engines
• Prevents engine rotation during high-torque crank bolt service
• Durable construction designed for repeated professional use
• Simplifies timing belt and front main seal maintenance
• Manufacturer Part Number: TS-TL-703

Fits select 1963-1996 Buick, Chevrolet, GMC, Oldsmobile, and Pontiac vehicles with GM 10-bolt and 12-bolt rear ends.

The Hotchkis Sport Suspension upper trailing arm bushing tool is an essential service solution designed for the clean removal and installation of bushings in GM 10 and 12-bolt rear axle housings. This tool eliminates the need for hammers or improvised presses, ensuring you don't damage your axle housing or ruin a fresh powder-coat finish during suspension maintenance.

Engineered for precision and durability, this tool simplifies what is traditionally a difficult task on A-Body, G-Body, and B-Body platforms. It provides the controlled force necessary to seat new bushings perfectly every time, making it a must-have for both professional technicians and DIY enthusiasts working on classic GM muscle cars and wagons.

• Specifically designed for GM 10-bolt and 12-bolt upper trailing arm bushings
• Prevents housing damage by eliminating the use of sledgehammers
• Facilitates easy removal of seized factory bushings
• Ensures proper alignment during the installation of new bushings
• Manufacturer Part Number: 32101

The Ticon Industries Sequence Straight Tube Cutting Jig is an essential tool for fabricators requiring precision and repeatability when working with round tubing. Engineered to hold tubing securely, this jig ensures perfectly square cuts, which are critical for achieving high-quality welds and tight fitment in custom exhaust, intake, and chassis fabrication.

• Fits multiple common tubing sizes: 2.5-inch, 3-inch, and 3.5-inch outer diameter (OD).
• Designed specifically for straight tube sections to provide a stable cutting guide.
• Simplifies the fabrication process by eliminating uneven edges and gap issues during mock-up.
• Precision machined for durability and long-term use in professional shop environments.
• Manufacturer Part Number: 903-03002-2000

The Wiseco RCS08700 Piston Ring Compressor Sleeve is a precision tool designed to streamline engine assembly by ensuring pistons are installed without damaging critical ring surfaces. Unlike adjustable pliers-style compressors, this sleeve features a fixed, smooth internal radius that tapers down to the exact 87.0mm bore size, allowing the piston assembly to slide into the block with perfectly even compression.

Engineered for professional builders and high-performance applications, the sleeve is hard-anodized and Teflon-coated to reduce friction and provide superior wear resistance. This design is specifically effective for installing high-performance oil rings, which often present the highest risk of snagging during installation.

• Precision-machined for 87.0mm bore engines
• Hard-anodized and Teflon-coated finish for low friction and durability
• Tapered internal radius ensures smooth, even ring compression
• Laser-marked size indication for quick identification in the shop
• Simplifies installation of high-tension performance ring sets
• Manufacturer Part Number: RCS08700

The ARP 91.5mm Tapered Ring Compressor is an essential precision tool for professional engine assembly. Designed to eliminate the risk of ring breakage or snagging, this tool provides a gradual, smooth compression of the piston rings as they are installed into the cylinder bore. Unlike universal adjustable compressors, the fixed 91.5mm diameter ensures perfect alignment and consistent pressure during the installation process.

• Bore Diameter: 91.5mm
• Tool Type: Tapered Ring Compressor
• Material: Precision machined for exact tolerances
• Application: Safe piston and ring installation into the cylinder block
• Manufacturer Part Number: 901-9150

This tool is engineered to help builders achieve a seamless transition from the ring compressor to the bore, protecting both the rings and the cylinder walls from damage. It is a must-have for any high-performance engine build requiring 91.5mm bore specifications.

The Synergy Manufacturing Toe Alignment Tool (MPN 3102-01) is an essential diagnostic and setup tool for any garage or off-road shop. Designed to facilitate accurate DIY wheel alignments, this tool allows you to precisely set toe-in and toe-out without the need for a professional alignment rack. It is particularly useful after installing new steering components, such as tie rods or drag links, or after adjusting suspension height.

By providing a flat, consistent surface against the wheel or hub, these plates eliminate the measurement errors often caused by uneven tire sidewalls or tread lugs. This ensures your steering geometry is within spec to prevent premature tire wear and improve straight-line tracking.

• Enables precise toe measurements using standard tape measures
• Essential for post-installation steering and suspension setup
• Heavy-duty construction for long-term shop durability
• Replaces guesswork with repeatable, accurate measurements
• Manufacturer Part Number: 3102-01

Clevite MPR1 Red Plastigage provides a reliable method for the final verification of total vertical oil clearance during engine reassembly. These color-coded strips are an industry-standard tool used by engine builders to confirm that main bearing, rod bearing, and camshaft journal tolerances meet specific requirements before final operation.

This tool is designed as a critical secondary check to ensure assembly accuracy. Note that Plastigage is intended to supplement, not replace, the use of precision micrometers and dial bore gauges for measuring crankshaft journals and housing bores prior to assembly.

• Manufacturer Part Number: MPR1
• Color: Red
• Quantity: 12 individual gauge strips per pack
• Application: Used to check clearances on main bearings, connecting rod bearings, and camshaft journals
• Function: Measures flattened width of the material to determine oil clearance gap

The Husky Liners TrackMat (HTW2X4MAT) is a professional-grade, impact-absorbing surface designed for comfort and protection in the garage, at the track, or in the trailer. This versatile mat functions as both a kneeling pad and a lay-down creeper, providing a plush barrier between you and hard, cold, or dirty surfaces.

• Construction: Built with a 3/4-inch thick closed-cell foam core fused to 100% polypropylene fibers for a soft yet ultra-tough finish.
• Durability: Engineered to be stain, oil, and chemical resistant, ensuring it withstands the rigors of heavy mechanical work.
• Moisture Management: The closed-cell design will not retain water, making it naturally resistant to mold and mildew.
• Portability: This lightweight mat folds down to a compact 2ft. x 2ft. size, making it easy to store in a trunk or gear bag.
• Protection: Provides excellent impact absorption to save your knees and back while working on flat surfaces.

The Torque Solution Valve Spring Compressor Tool (TS-TL-BVST) is a specialty valvetrain tool designed specifically for Honda and Acura B-Series and H-Series VTEC engines. This tool allows for the compression of valve springs while the cylinder head is either on or off the engine, facilitating the replacement of valve springs, retainers, and valve stem seals without the need for complex universal clamps.

• Fits Honda and Acura B16, B18, and H22 VTEC engines.
• CNC-machined from high-quality materials for precise fitment and durability.
• Simplifies valvetrain maintenance and performance upgrades.
• Designed to provide clear access to valve keepers for safe removal and installation.
• Manufacturer Part Number: TS-TL-BVST

By using this engine-specific tool, technicians can significantly reduce the risk of component damage and decrease the time required for top-end service.

The Torque Solution Crankshaft Socket Tool (TS-TL-713) is a precision-engineered specialty tool designed for the Subaru EJ engine platform. This tool is essential for any technician or DIY enthusiast performing engine assembly, timing belt services, or valve clearance checks. It slides directly over the crankshaft snout, allowing for controlled manual rotation of the engine without risking damage to the crankshaft, keyway, or threads.

By providing a secure interface for a 1/2-inch drive ratchet or breaker bar, this socket replaces the risky practice of using a crank bolt and a standard socket to turn the engine. It ensures you can precisely align timing marks or rotate the rotating assembly during builds with confidence and safety.

• Designed specifically for Subaru EJ-series engines
• Enables safe, manual rotation of the crankshaft by hand
• Protects the crankshaft snout and keyway from damage during service
• Ideal for timing belt replacements, valve adjustments, and engine rebuilds
• Durable, high-strength construction for workshop use
• Manufacturer Part Number: TS-TL-713

The Tein Coilover Adjustment Spanner Wrench is the essential tool for managing your suspension’s ride height and spring preload. Engineered specifically to interface with Tein spring seats and seat locks, this high-strength wrench ensures you can make precise adjustments without slipping or rounding off the aluminum hardware.

Maintaining a genuine Tein tool in your gear bag is critical for track-side tuning or seasonal height changes. This current version (SST01-K0335-B) provides the correct leverage and tooth profile required for the high-torque demands of adjusting loaded seat locks. It serves as the direct replacement for the discontinued SST01-G2250-P wrench.

• Genuine Tein adjustment tool
• Application: Spring seat and seat lock adjustment
• Manufacturer Part Number: SST01-K0335-B
• Supersedes/Replaces: SST01-G2250-P
• Sturdy construction for long-term durability

The ICON On-Vehicle Uniball Replacement Tool Kit (614518) provides a professional-grade solution for servicing 1-inch uniballs without the need to remove control arms from the vehicle. This kit is specifically designed to work with ICON Vehicle Dynamics upper control arms, as well as aftermarket control arms from other manufacturers that utilize a standard 1-inch uniball bearing.

By allowing for on-vehicle service, this tool kit significantly reduces shop time and labor compared to traditional methods. The mechanical press design eliminates the requirement for a hydraulic shop press, enhancing technician safety and preventing the risk of permanent bore damage or finish marring often associated with misaligned press work. This is an essential service tool for maintaining off-road suspension systems and ensuring long-term pivot reliability.

• Fits standard 1-inch uniballs used in ICON and other aftermarket upper control arms
• Enables on-vehicle service to minimize labor and teardown requirements
• Mechanical press design eliminates the need for a hydraulic shop press
• Reduces the risk of damaging the control arm bore during removal or installation
• Includes all necessary cups, spacers, and hardware for uniball replacement
• Manufacturer Part Number: 614518

The ICON Billet Spanner Wrench Kit (198001) is a specialized multi-tool designed for precise adjustment of coilover preload. Engineered for professional-grade utility, this tool eliminates the need for multiple measuring devices and wrenches during the suspension tuning process. It features dual 3/8" dowels: one on the hook for maximum leverage and a secondary straight dowel at the handle end for limited-clearance applications where a standard wrench cannot reach.

To streamline adjustments, ICON integrated a magnetic 5/32" Allen wrench directly into the handle for quick access to collar set screws. Laser-marked measurement guides on the tool body allow for immediate preload verification on the spot. For easy organization, the magnetic back secures the wrench to any ferrous surface, such as a toolbox or hoist, when the job is complete.

• Two 3/8" dowels for varied access and leverage options
• Magnetically attached 5/32" Allen key for collar set screws
• Laser-marked measurement guides for precise preload adjustment
• Built-in bottle opener for convenience
• Magnetic back for secure storage on ferrous surfaces
• Manufacturer Part Number: 198001

The Fox 2.5 Series Shock Preload Spanner Wrench is a specialized tool designed for precision suspension tuning. Engineered specifically to interface with the threaded preload collars on Fox 2.5 shock bodies, this wrench allows you to accurately adjust spring tension and vehicle ride height. Its heavy-duty construction ensures you can apply the necessary leverage to turn collars even when under spring tension or in the presence of road debris.

• Compatible with Fox 2.5 series shock bodies
• Engineered for adjusting threaded spring preload collars
• Provides necessary leverage for setting ride height
• Durable design prevents marring or damage to aluminum shock components
• Manufacturer Part Number: 803-00-732

Precision engine assembly requires tools that protect your components during critical steps. The ARP 900-2125 Tapered Piston Ring Compressor is CNC-machined from 6061-T6 aluminum billet and features a specific radius for its designated bore size. Unlike universal adjustable band-style compressors, this fixed-diameter tool provides a smooth, tapered transition that ensures rings are compressed evenly into the cylinder without the risk of snagging or breakage.

• Bore Size: 4.2125 inches
• Material: CNC-machined 6061-T6 aluminum billet
• Finish: Type III hard-anodized for long-term durability and wear resistance
• Design: Precision-tapered bore with internal radius for seamless piston installation
• Manufacturer Part Number: 900-2125

The ARP 4.055in Tapered Piston Ring Compressor is a precision engine-building tool designed to ensure safe and efficient piston installation. Unlike universal adjustable compressors that can lead to ring breakage or misalignment, this fixed-bore tool uses a precise internal taper to gradually compress the rings as the piston is pushed into the cylinder. This eliminates the risk of snagging a ring on the deck surface or marring the piston skirts during assembly.

• CNC-machined from high-quality 6061-T6 aluminum billet for exceptional durability
• Hard-anodized finish provides a smooth surface and resists wear over time
• Precision 4.055-inch bore diameter for exact tolerances
• Tapered design facilitates a seamless transition from the tool into the engine block
• Manufacturer Part Number: 900-0550

The Access EZ-Retriever II Cargo Reaching Tool (MPN 70950) provides a simple, heavy-duty solution for retrieving gear that has shifted to the front of your truck bed. Designed specifically for use with tonneau covers, toppers, and lids, this tool allows you to clear the entire length of a long-box bed without having to climb inside.

• Adjustable Reach: Features a telescoping design that extends to a full 5 ft. 9 in. to reach the bulkhead of any standard pickup.
• Heavy-Duty Construction: Manufactured from aircraft-grade aluminum for high strength and corrosion resistance, capable of handling large, heavy objects.
• Twist-Lock Mechanism: Easy operation—simply twist the handle to the left to extend and to the right to lock securely into place.
• Universal Compatibility: Works with all truck beds and cargo management systems.

Stop straining or removing your tonneau cover to access your gear. The EZ-Retriever II offers the leverage and durability required for professional and daily utility use.

The Access Accessories EZ-Retriever is a heavy-duty cargo management tool designed to retrieve gear that has shifted to the cab-end of your truck bed. By providing nearly 6 feet of reach, this tool eliminates the need to climb into the bed or under a tonneau cover to access your equipment. It is an ideal solution for trucks equipped with toppers, lids, or roll-up covers where access is limited.

Constructed from aircraft-grade aluminum, the EZ-Retriever is durable enough to hook and pull large, heavy objects while remaining lightweight and easy to handle. The intuitive telescoping design features a twist-lock mechanism: simply twist the handle to the left to extend the shaft and to the right to lock it securely at the required length.

• Eliminates the need to climb into the truck bed to reach shifted cargo
• Manufactured from high-strength aircraft-grade aluminum for lasting durability
• Extends to a full length of 5 ft. 9 in. for maximum reach
• Simple twist-lock operation for quick length adjustment
• Compatible with all truck beds and works under most tonneau covers and toppers
• Manufacturer Part Number: 50710

Fits select 1980-2017 American Motors, Buick, Cadillac, and Chevrolet vehicles. The Yukon Gear & Axle YT P22 Carrier Bearing Puller is a professional-grade solution for removing carrier bearings without the need for a hydraulic press. This heavy-duty tool set is specifically engineered for one-ton drivetrain applications, providing a secure, high-torque pull on even the most stubborn bearings.

Designed for durability and precision, the YT P22 features Yukon's XHD (Extra Heavy Duty) Clamshells, allowing for safe and efficient service on large-diameter housings. This kit includes a dedicated bench-top stand to keep components organized and accessible during differential rebuilds or gear swaps.

• Simplifies bearing removal on Dana 70HD, Dana 80, Ford 10.25", Ford 10.5", and GM/Chrysler 11.5" housings
• Engineered for heavy-duty 1-ton truck applications
• Includes specialized XHD Clamshells for secure grip
• Comes with a heavy-duty bench-top storage stand
• Manufacturer Part Number: YT P22

The Yukon Gear & Axle YT P17 Pinion Adapter Kit is an essential expansion for the YT P22 XL bearing puller tool, specifically engineered for professional-grade drivetrain assembly and teardown. Drivetrain installation requires high-precision tools to avoid damaging critical bearing surfaces or pinion shafts. This purpose-built adapter kit ensures the correct reach and interface for pulling pinion bearings safely and efficiently.

Constructed to handle the high torque loads required during axle service, this kit provides the specialized components needed to adapt the large-frame puller for pinion-specific tasks. It is designed to integrate seamlessly with existing Yukon specialty tools, providing the mechanical advantage needed for stubborn press-fit components.

• Designed specifically for use with Yukon XL Bearing Puller Tool (YT P22)
• Includes 70mm long extension plug for deep-reach pinion applications
• Includes XL adjuster ring for secure, centered fitment
• Includes heavy-duty XL adapter body
• Manufacturer Part Number: YT P17

Fits select 2018-2022 Jeep Wrangler and Wrangler Unlimited models. This Yukon Gear & Axle Deluxe Pinion Depth Setting Tool is a critical component for professional differential technicians and DIY installers setting up ring and pinion gears.

Achieving the correct pinion depth is essential for establishing a proper gear mesh pattern, which ensures quiet operation and prevents premature wear on your differential. The Yukon YT D02 tool simplifies this process, allowing you to accurately measure the distance from the pinion head to the carrier centerline to determine the exact shim thickness required.

• High-Quality Micrometer: Includes a precision dial micrometer for professional-grade accuracy.
• Robust Construction: Engineered to provide consistent, repeatable measurements during gear setup.
• MPN: YT D02
• Compatibility Note: This tool does not work with Dana 70, Dana 80, or Ford 9.75-inch pinions.

Whether you are performing a gear ratio swap or a full differential rebuild, this tool provides the precision needed to meet strict drivetrain tolerances.

The Wiseco 99.75mm Piston Ring Compressor Sleeve is a precision engine building tool designed to facilitate the seamless installation of pistons into the engine block. Engineered with a smooth internal radius that tapers down to the specific 99.75mm bore size, this sleeve compresses piston rings evenly and gradually, significantly reducing the risk of ring breakage or damage during assembly—a critical factor when handling delicate high-performance oil ring sets.

Constructed for longevity in professional shop environments, the sleeve is hard-anodized and features a specialized Teflon coating. This combination provides a low-friction surface that allows the piston to slide into the cylinder with minimal resistance while ensuring the tool remains wear-resistant over hundreds of rebuilds.

• Bore Size: 99.75mm
• Material: Hard-anodized aluminum for superior durability
• Finish: Teflon-coated for low friction and smooth piston movement
• Design: Smooth internal radius taper ensures even ring compression
• Identification: Permanent laser-marked sizing for quick identification
• Manufacturer Part Number: RCST09975