The Wiseco RCS07800 78.0mm Piston Ring Compressor Sleeve is a professional-grade tool engineered to simplify engine assembly while protecting your rings and cylinder bores. This sleeve features a precision-machined, smooth internal radius that tapers exactly to a 78.0mm bore, ensuring that high-performance ring sets—including delicate, high-tension oil rings—are compressed evenly and smoothly as the piston is seated.

• Precision Fit: Engineered specifically for 78.0mm bore sizes to eliminate ring snagging.
• High-End Finish: Hard-anodized and Teflon-coated for ultra-low friction and superior wear resistance.
• Tapered Design: Smooth radius taper allows for seamless ring compression during installation.
• Professional Visibility: Laser-marked with the size for easy identification in your tool chest.
• Application: Ideal for high-performance engine rebuilds where ring integrity is critical.
• Manufacturer Part Number: RCS07800

Ensure a precise and damage-free engine assembly with the Wiseco RCS07750 77.5mm Bore Ring Compressor Sleeve. This essential engine-building tool is engineered to compress piston rings smoothly and evenly, significantly reducing the difficulty and risk associated with installing high-performance oil rings into the cylinder block.

Each sleeve is manufactured with a specific internal taper and a smooth radius that guides the piston assembly into the bore without snagging. To provide long-term durability and minimize friction during the installation process, Wiseco utilizes a hard-anodized finish paired with a Teflon coating. This combination ensures superior wear resistance and a low-drag surface for the rings to glide against.

• Precision-machined for 77.5mm bore sizes
• Hard-anodized and Teflon-coated for low friction and durability
• Tapered design facilitates even ring compression
• Laser-marked with size indication for quick identification
• Manufacturer Part Number: RCS07750

Ensure a precise and damage-free engine build with the Wiseco 77.0mm Ring Compressor Sleeve (RCS07700). Unlike generic adjustable compressors, this dedicated sleeve features a smooth internal radius that tapers down to the exact bore size, compressing piston rings evenly as the assembly slides into the cylinder. This design significantly reduces the risk of binding or breaking high-performance oil rings during installation.

• Precision Machining: Engineered specifically for 77.0mm bores to provide seamless ring transition into the cylinder.
• Low-Friction Finish: Hard-anodized and Teflon-coated for superior wear resistance and reduced friction during assembly.
• Even Compression: Distributes pressure uniformly around the ring circumference to prevent snagging or scoring.
• Shop Ready: Laser-marked with size indication for quick identification among your engine building tools.
• Manufacturer Part Number: RCS07700

Streamline your engine assembly with the Wiseco RCS07600 76.0mm Bore Ring Compressor Sleeve. This precision-machined tool is engineered to simplify the installation of pistons and rings, providing a smooth, tapered radius that evenly compresses rings into the cylinder bore without snagging or damage. It is particularly effective for managing the high-tension oil rings found in modern high-performance builds.

Constructed for longevity in a professional shop environment, the sleeve is hard-anodized and Teflon-coated to minimize friction and provide superior wear resistance. Each sleeve is laser-marked with its specific bore size for rapid identification in your toolbox.

• Bore Diameter: 76.0mm
• Construction: Hard-anodized aluminum with Teflon coating
• Features: Smooth internal taper and radius for even ring compression
• Application: Reduces risk of ring breakage or bore scuffing during assembly
• Manufacturer Part Number: RCS07600

The Wiseco RCS07550 Piston Ring Compressor Sleeve is a precision engine-building tool designed to simplify the installation of high-performance pistons and rings. Engineered with a smooth radius that tapers down to a specific 75.5mm bore size, this sleeve compresses piston rings evenly and smoothly, significantly reducing the risk of damaging or breaking delicate oil rings during assembly.

• Bore Size: 75.5mm
• Material: Hard-anodized aluminum for long-term durability
• Coating: Teflon-coated surface for low friction and smooth piston travel
• Design: Tapered bore with a smooth radius for seamless ring compression
• Markings: Laser-etched size indication for quick identification in the shop
• Manufacturer Part Number: RCS07550

The Wiseco 74.5mm Piston Ring Compressor Sleeve (RCS07450) is a precision engine building tool designed to simplify the installation of pistons into the cylinder bore. Engineered for professional-grade rebuilds, this fixed-bore sleeve eliminates the risk of ring breakage or misalignment common with universal adjustable tools.

• Precision Bore: Specifically sized for 74.5mm bores with a smooth entry radius that tapers down to ensure uniform ring compression.
• Advanced Coating: Hard-anodized aluminum construction featuring a Teflon coating to minimize friction and provide long-term wear resistance.
• High-Performance Compatibility: Optimized to safely compress thin, high-performance oil rings without damage.
• Clear Identification: Laser-marked with the 74.5mm size indication for quick identification in the tool chest.
• Manufacturer Part Number: RCS07450

Ensure a precise and damage-free engine assembly with the Wiseco RCS07400 Piston Ring Compressor Sleeve. Engineered for 74.0mm bore applications, this professional-grade tool features a smooth internal radius that tapers down to the exact bore size. This design allows for even and smooth compression of the piston rings, significantly reducing the risk of snapping or damaging high-performance oil rings during installation into the cylinder block.

Constructed for longevity in a professional shop environment, the sleeve is hard-anodized and Teflon coated. This combination provides a low-friction surface for the rings to glide against while ensuring the sleeve itself resists wear over repeated use. Each unit is laser-marked for easy size identification on your workbench.

• Part Number: RCS07400
• Bore Diameter: 74.0mm
• Material: Hard-anodized aluminum
• Coating: Teflon treated for low friction
• Tapered design for smooth ring compression
• Laser-etched size markings for quick identification

Ensure precise and damage-free piston installation with the Wiseco 73.40mm Bore Ring Compressor Sleeve. Designed for professional engine builders and enthusiasts alike, this sleeve features a smooth internal radius that tapers down to the exact bore size. This allows piston rings to compress evenly and gradually as they enter the cylinder block, significantly reducing the risk of breaking or distorting delicate high-performance oil rings.

Constructed for longevity and ease of use, each sleeve is hard-anodized and Teflon-coated to minimize friction and provide superior wear resistance. The tool is laser-marked with the specific bore size for quick, reliable identification in any shop environment.

• Precision-machined for 73.40mm bore applications
• Hard-anodized and Teflon-coated for low friction and maximum durability
• Smooth tapered radius ensures even and uniform ring compression
• Simplifies the installation of high-performance piston and oil rings
• Laser-etched size indication for easy tool identification
• Manufacturer Part Number: RCS07340

Ensure a precise and damage-free engine assembly with the Wiseco Piston Ring Compressor Sleeve. This specialty tool is engineered for engine builders who require a reliable, repeatable method for installing pistons without risking damage to high-performance ring sets. Designed for a 73.0mm bore, this tapered sleeve provides a smooth transition from the ring lands into the cylinder block.

• Precision Taper: Features a machined smooth radius that tapers specifically to a 73.0mm bore size, compressing rings evenly to prevent breakage.
• Durable Construction: Hard-anodized aluminum construction for structural integrity during repeated use.
• Low-Friction Coating: Teflon-coated surface reduces resistance and prevents scuffing of the piston rings during installation.
• Simplified Assembly: Specifically designed to reduce the difficulty of installing thin, high-tension performance oil rings.
• Laser-Marked Sizing: Permanent size indication is laser-etched into the sleeve for quick identification.
• Manufacturer Part Number: RCS07300

Ensure precision and safety during engine assembly with the Wiseco RCS07200 Piston Ring Compressor Sleeve. Engineered specifically for a 72.0mm bore, this tool features a smooth internal radius that tapers down to the exact cylinder size, allowing for seamless piston installation. The design eliminates the risk of snagging or breaking high-performance oil rings, providing even compression as the piston moves into the bore.

• Precision-machined for a 72.0mm bore diameter
• Hard-anodized and Teflon coated to reduce friction and provide long-term wear resistance
• Tapered entry design compresses rings smoothly and evenly to prevent damage
• Laser-marked with size indication for easy identification in the toolbox
• Ideal for high-performance engine rebuilds where ring seating is critical
• Manufacturer Part Number: RCS07200

Simplify your engine assembly with the Wiseco RCS07000 70.0mm Piston Ring Compressor Sleeve. Engineered for precision and ease of use, this specialty tool features a smooth internal radius that tapers down to the specific 70.0mm bore size. This design allows you to compress piston rings smoothly and evenly as they enter the cylinder, significantly reducing the difficulty of installing high-tension, high-performance oil rings.

Built to professional engine-builder standards, the RCS07000 is hard-anodized and Teflon-coated. This combination provides a low-friction surface for the piston to slide through while ensuring long-term wear resistance for repeated shop use. Each sleeve is laser-marked with the bore size for quick identification in your toolbox.

• Manufacturer Part Number: RCS07000
• Bore Size: 70.0mm
• Finish: Hard-anodized and Teflon-coated for low friction
• Tapered design ensures smooth ring compression
• Reduces risk of ring damage during installation
• Laser-marked sizing for durability and visibility

The Wiseco RCS06900 69.0mm Piston Ring Compressor Sleeve is a professional-grade assembly tool designed to ensure precise, damage-free piston installation. Unlike generic adjustable clamps, this fixed-bore sleeve features a precision-machined internal radius that tapers down to the exact 69.0mm bore size, compressing piston rings evenly and smoothly as the piston is seated into the cylinder block.

Constructed for longevity and performance, this sleeve is hard-anodized and Teflon-coated to provide a low-friction surface that protects high-performance oil rings during assembly. The durable finish also offers superior wear resistance for repeated use in shop environments.

• Precision tapered design for smooth, even ring compression
• Hard-anodized and Teflon-coated for low friction and durability
• Specifically sized for 69.0mm bore applications
• Laser-marked with size indication for quick identification
• Simplifies installation of high-performance ring sets
• Manufacturer Part Number: RCS06900

The Wiseco RCS06700 67.0mm Tapered Piston Ring Compressor Sleeve is a precision engine-building tool designed to ensure smooth, damage-free piston installation. Unlike generic band-style compressors, this sleeve features a fixed, machined taper that compresses rings evenly as the piston assembly passes through. This significantly reduces the risk of catching or snapping high-performance oil rings during the assembly process.

Constructed for longevity and performance, each sleeve is hard-anodized and Teflon-coated to provide a low-friction surface that prevents ring snagging. The smooth internal radius is engineered to guide the piston into the bore with professional-grade accuracy, making it an essential tool for high-tolerance engine rebuilds.

• Specifically sized for 67.0mm bore applications
• Hard-anodized and Teflon-impregnated coating for maximum wear resistance and low friction
• Tapered internal diameter ensures smooth, even ring compression
• Laser-marked with size indication for quick identification
• Manufacturer Part Number: RCS06700

The Whiteline WTK004 Wheel String Alignment Kit provides a professional-grade solution for setting precise vehicle alignment at the track or in the garage. This comprehensive system utilizes retractable string lines to establish a parallel reference frame, allowing for accurate toe measurements and suspension geometry tuning without a dedicated alignment rack.

Engineered for consistency and ease of use, the kit features durable components designed to withstand the rigors of trackside adjustments. The retractable string design ensures constant tension for repeatable measurements, while the included precision rulers allow for fine-tuning your setup. The entire system is housed in a rugged, hard plastic carry case for organized storage and easy transportation.

• Complete kit designed to simplify the wheel alignment and replacement process
• Retractable string lines provide a consistent, high-tension reference point
• Engineered components support repeatable performance and precision measurements
• Kit includes: 2 frames, 2 precision rulers, and 2 retractable strings
• Includes a hard plastic carry case for protection and portability
• Manufacturer Part Number: WTK004

The Whiteline Universal Press/Pull Tool Kit (WTK001) provides a safe, professional alternative to makeshift workshop methods for removing and installing suspension bushings. While using old bearing shells or sockets creates a significant safety risk because heat-treated steel can shatter under stress, these sleeves are engineered from mild steel to allow for distortion or crushing if over-pressed.

This comprehensive set is designed to simplify the installation and removal of Nolathane polyurethane bushings and assist with other general workshop pressing requirements. The kit features a wide range of sleeve sizes and heavy-duty threaded rods to ensure compatibility across various automotive applications.

• 18 Press tubes for various bushing diameters
• 4 Stepped plates for secure alignment
• 4 Threaded rods with 4 spare bearings
• 8 Spare bearing plates
• Mild steel construction for enhanced safety under load
• Manufacturer Part Number: WTK001

The Mishimoto Braid Spreader Tool (MMTL-BS) is an essential addition to any plumbing kit, designed to eliminate the difficulty and physical hazard of assembling stainless steel braided PTFE (Teflon) hoses. This tool provides a safe, controlled way to peel back the outer braiding, allowing for the precise seating of the olive or ferrule without risking finger injuries or piercing the inner hose liner.

Featuring a lightweight anodized aluminum body, the tool is designed for ergonomic use during long assembly sessions. The polished stainless steel insert is reversible, accommodating a wide range of hose sizes from -3AN up to -8AN. Beyond spreading the braid, the tool is used to reshape the PTFE liner if it becomes out-of-round during the cutting process and helps press the ferrule into place for a secure, leak-free seal.

• Universal Fitment: Compatible with -3AN, -4AN, -6AN, and -8AN PTFE-lined hoses.
• Dual Functionality: Spreads steel braiding and reshapes deformed inner liners.
• Premium Construction: Durable anodized aluminum housing with a low-friction polished stainless steel insert.
• Integrated Storage: Hollow body design allows for the storage of spare olives or ferrules.
• Manufacturer Part Number: MMTL-BS
• Warranty: Mishimoto Lifetime Warranty.

The Vibrant Performance Hose End Fitting Installation Tool Kit (MPN: 2992) provides the essential components for professional assembly of flexible braided hoses and reusable hose end fittings. This specialized kit eliminates the common struggle of seating hose ends by providing mechanical leverage, ensuring a secure, leak-free connection while protecting the finish of your high-performance fittings.

Designed for shop use, the kit includes a set of magnetic aluminum vise jaws to hold fittings securely without marring. The interchangeable steel jigs cover the most common automotive plumbing sizes, making it an indispensable resource for plumbing fuel systems, oil lines, and cooling circuits.

• Complete assembly solution for AN sizes: -4, -6, -8, -10, and -12
• Includes heavy-duty clamping tool and precision steel jigs
• Protective aluminum vise jaws prevent damage to anodized fitting finishes
• Rugged carrying case for organized storage and transport
• Manufacturer Part Number: 2992

The Vibrant 2991 Pipe Cutting Tool is a precision fabrication instrument designed to provide clean, square cuts on small-diameter tubing. This tool is engineered to slice through a variety of materials including steel, aluminum, copper, and plastic without causing wall distortion or compression, ensuring the structural integrity of your fluid lines or intake components remains intact.

Ideal for tight-clearance environments, this manual cutter allows for controlled, incremental pressure, resulting in a professional finish that requires minimal deburring. It is a necessary tool for any technician or fabricator working with hard lines and custom tubing configurations.

• Manufacturer Part Number: 2991
• Cutting Capacity: 3mm to 28mm (1/8" to 1-1/8") Outer Diameter
• Material Compatibility: Steel, Aluminum, Copper, and Plastic
• Operation: Manual adjustment knob for precise cutting wheel pressure

The Vibrant Performance 2990A Bead Roller Socket Adapter is a precision-engineered upgrade for fabricators seeking more control and efficiency during the tubing preparation process. Designed to replace the standard hand crank on manual bead rollers, this adapter allows the operator to use a power tool—such as a drill or impact driver—to rotate the forming dies.

By switching to a power-driven setup, you can maintain more consistent torque and smoother rotation, which is critical for achieving uniform, professional-grade beads on 6061 aluminum or stainless steel tubing. This tool is built to handle the mechanical stresses of shop use and ensures a secure, slip-free interface with your equipment.

• Manufacturer Part Number: 2990A
• Compatibility: Designed for use with Vibrant Performance Manual Bead Rollers
• Function: Converts manual crank drive to a power-tool-compatible socket interface
• Construction: Durable machined steel for high torque transfer
• Benefit: Provides smoother feed rates and more consistent bead depth compared to manual cranking

The Vibrant Performance Manual Bead Roller (MPN 2990) provides a professional-grade solution for adding retention beads to custom intake, cooling, and intercooler piping. This tool ensures secure hose connections by creating a precise bead that prevents silicone couplers from slipping under pressure. Constructed with a combination of steel and aluminum components, it is engineered for durability and repeatable results in a fabrication environment.

• Minimum Tube Diameter: 3/4 inch O.D.
• Aluminum Capacity: Up to 16 gauge (0.065" or 1.65mm) wall thickness
• Titanium Capacity: Up to 18 gauge (0.049" or 1.25mm) wall thickness
• Bead Dimensions: Approximately 2mm tall and 6.5mm wide
• Included Hardware: Complete manual bead roller assembly and a hard carrying case
• Manufacturer Part Number: 2990

Vibrant Performance heavy duty hose cutting shears (MPN: 2989) are engineered to deliver clean, square cuts on both braided and non-braided flex hoses. These shears eliminate the frayed ends and debris often caused by using a hacksaw or abrasive wheel, making it significantly easier to install AN hose ends and fittings without damaging the inner liner.

• Designed for flex hoses from -3 AN up to -20 AN
• Heavy duty construction built for consistent shop use
• Compatible with stainless steel braided, nylon braided, and non-braided flex hoses
• Manufacturer Part Number: 2989

The Vibrant Performance 37 Degree Flare Tool is an essential shop instrument for plumbing custom fluid systems. Designed specifically to create precise 37-degree flares on hardline tubing, this tool ensures a reliable, leak-free metal-to-metal seal when mating lines to standard male AN adapter fittings.

This versatile tool accommodates a wide range of plumbing requirements, supporting various tubing diameters. Whether you are fabricating brake lines, fuel systems, or coolant hardlines, it provides the consistent performance needed for high-pressure automotive applications where standard 45-degree SAE flares are insufficient.

• Manufacturer Part Number: 2939
• Flare Angle: 37 Degrees (AN Standard)
• Tubing Size Range: 1/8" to 3/4"
• Application: Hardline tubing fabrication for use with AN plumbing adapters
• Compatibility: Suitable for aluminum, copper, and soft steel tubing

The Vibrant Performance handheld tube straightener is a precision tool designed to provide a professional finish for custom plumbing projects. It effectively removes bends and irregularities from coiled tubing, ensuring clean aesthetics and optimal flow for fuel lines, brake lines, and transmission systems.

This tool is engineered to work with various hardline materials, including aluminum, steel, and stainless steel. Its adjustable roller design accommodates a wide range of outer diameter (O.D.) sizes, making it an essential utility for fabricators and DIY mechanics alike.

• Manufacturer Part Number: 2938
• Size Range: Fits 3/16" O.D. to 1/2" O.D. tubing
• Compatible Materials: Aluminum, steel, and stainless steel
• Operation: Handheld manual straightening
• Finish: Black

The Vibrant Performance Adjustable AN Wrench is a specialized tool designed for plumbing high-performance fuel, oil, and coolant systems. Engineered to replace a full set of fixed wrenches, this tool provides a precise, adjustable fit for fittings ranging from -3 AN to -20 AN sizes.

Constructed specifically for use with aluminum plumbing components, this wrench helps prevent the marring, scratching, and rounding of anodized finishes often caused by standard steel tools. The adjustable jaw allows for quick transitions between different line sizes during assembly or trackside maintenance, ensuring a secure grip without damaging the fitting's hex.

• Size Range: -3 AN to -20 AN
• Protects anodized aluminum fittings from surface damage
• Adjustable jaw for versatile plumbing applications
• Manufacturer Part Number: 20994

The Vibrant Performance Adjustable AN Wrench is a specialized tool designed to protect your aluminum fittings from the marring and damage caused by standard steel wrenches. Built for precision and durability, this wrench features unique V-shaped jaws that provide maximum contact with the fitting's hex flats to prevent rounding and preserve the anodized finish of your plumbing components.

Constructed from high-strength aluminum with a sleek black anodized finish, this tool is both lightweight and rugged enough for regular shop use. It replaces the need for a bulky set of fixed-size wrenches by offering a versatile range that covers the most common performance plumbing sizes.

• Adjustment Range: -4AN to -16AN
• Material: High-strength aluminum construction
• Finish: Durable Black Anodized
• Jaw Design: Non-marring V-jaws for secure grip
• Manufacturer Part Number: 20993

Vibrant Performance Billet Aluminum Vise Jaws are an essential tool for any technician assembling AN hose ends and fittings. These jaws allow you to securely clamp components in a standard bench vise without the risk of scratching or marring high-luster anodized finishes.

• Precision-machined from high-grade billet aluminum for durability and accurate alignment.
• Integrated magnets on the backside of each jaw hold them firmly in place against the vise faces during use.
• Specifically designed to protect delicate finishes on aluminum fittings during high-torque assembly.
• Manufacturer Part Number: 20990

The Vibrant Performance 6-piece Aluminum AN Wrench Set (MPN 20989) is an essential addition to any technician's toolbox for plumbing automotive fluid systems. Unlike standard steel wrenches, which can easily mar, gall, or scratch the anodized finish of aluminum fittings, these wrenches are manufactured from heat-treated aluminum to protect your high-performance plumbing during assembly and maintenance.

Each wrench features a short-handle design to prevent over-torquing and ensure access in tight engine bays. The set covers the most common automotive plumbing sizes, making it a comprehensive solution for fuel, oil, and coolant line fabrication.

• Construction: High-strength heat-treated aluminum
• Included Sizes: -4AN, -6AN, -8AN, -10AN, -12AN, and -16AN
• Quantity: Set of 6 wrenches
• Manufacturer Part Number: 20989
• Designed to prevent damage to anodized AN fittings and adapters

Protect the finish of your high-end plumbing components with the Vibrant Performance -16AN aluminum wrench. This specialized hand tool is engineered specifically for tightening and loosening aluminum -16AN fittings and adapters without the risk of marring, scratching, or stripping the anodized surface—a common issue when using standard steel wrenches.

Constructed from lightweight, high-strength aluminum, this wrench features a black anodized finish for long-lasting durability and corrosion resistance. It is precision-machined to ensure a secure fit on the fitting hex, allowing for even torque distribution across the flats during assembly or maintenance. This tool is an essential for any professional builder or DIY enthusiast working with automotive fluid delivery systems.

• Manufacturer Part Number: 20916
• Size: -16AN
• Material: High-strength aluminum construction
• Finish: Anodized Black
• Prevents damage to aluminum fitting hexes
• Individual retail packaging

The Vibrant Performance -12AN Aluminum Wrench is an essential specialty tool designed to protect the finish of high-performance plumbing components. While standard steel wrenches easily mar or scratch the anodized coating on aluminum AN adapters and hose ends, this aluminum wrench provides a softer contact surface to ensure a clean, damage-free installation during tightening or loosening.

• Precision Fit: Specifically sized for -12AN fittings and adapters
• Surface Protection: Aluminum construction prevents scratching of decorative or protective anodized finishes
• Durable Finish: Features a black anodized coating for corrosion resistance and long tool life
• Construction: High-quality aluminum for the ideal balance of strength and surface safety
• Part Number: 20912

The Vibrant Performance -10AN Aluminum Wrench (MPN: 20910) is a specialized hand tool engineered for the assembly and maintenance of high-performance plumbing systems. Unlike standard steel wrenches that can mar or gouge the finish of your AN adapters and hose ends, this wrench is precision-machined from aluminum to ensure a non-marring interface with your hardware.

Designed specifically for -10AN hex sizes, this tool provides a secure fit to prevent rounding or slipping during high-torque tightening. It is an essential addition to any technician's toolbox for preserving the show-quality finish of fuel, oil, and coolant lines.

• Size: -10AN
• Material: Lightweight Aluminum
• Finish: Anodized Black
• Part Number: 20910
• Packaging: Individual retail packaged