The Innovate Motorsports DB gauges are 52mm (2 1/16) air fuel gauges. Each gauge features a bright LED display (available in blue, green, or red). For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive display option for the LC-1, LC-2, LM-1, or LM-2 lambda controller kits.

• These kits includes the DB Gauge, mounting hardware, and quick-start guide.

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Includes dual custom heat shields designed specifically for this application
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 12 hp and 8 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Provides power gains while maintaining A/F ratios
• Features Injen's patented MegaRam (MR) Technology
• Features Injen's patented Air Fusion Technology
• Replacement air filter part number X-1063-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Dual 6061-T6 aluminum intake tubing
• Increased Torque Up To 8 ft./lbs.
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen's Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.

• This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
• Uses all factory mounting locations? Includes all necessary hardware for a hassle-free installation
• Beaded Tube Ends to Help Prevent Couplers from Coming Off
• Stainless Steel Band Clamp with Inner Protective Liner
• Manufactured from Lightweight 6061-T6 Aluminum Piping
• Increase Throttle Response and Decreases Turbo Lag
• Stepped design utilizing 2.00"and 2.50"piping
• Unique Injen Logo Plate for a Refined Style
• Injen Technology Limited Lifetime Warranty
• Available in Polished and Black Finishes
• Mandrel-bent Tubing for Increased Flow
• Automotive Grade Silicone Couplers
• Made in Pomona, California USA
• Black

This Part Fits:

Add some easy horsepower to your Ride with this RD Series Performance cold air intake (CAI) from Injen Technology! The engineers at Injen have spent considerable amounts of time designing, testing, and perfecting this CAI to produce some serious bolt-on power while also providing amazing engine bay aesthetics. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. , , The soul of this intake is found within our mandrel-bent 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. This tube reaches into the depths of the engine bay to collect the coolest and densest air available. Additionally, this RD intake also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen RD performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? Injen also offers this intake system in a polished or a powder-coated Black finish. To top it all off, this RD CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!,

• Smooth mandrel-bent I take piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Replacement air filter part number X-1010-BB
• 6061-T6 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• SuperNano Dry Filter X-1010
• CARB EO #: D-476-8

This Part Fits:

Add some easy horsepower to your Ride with this RD Series Performance cold air intake (CAI) from Injen Technology! The engineers at Injen have spent considerable amounts of time designing, testing, and perfecting this CAI to produce some serious bolt-on power while also providing amazing engine bay aesthetics. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. , , The soul of this intake is found within our mandrel-bent 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. This tube reaches into the depths of the engine bay to collect the coolest and densest air available. Additionally, this RD intake also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen RD performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? Injen also offers this intake system in a polished or a powder-coated Black finish. To top it all off, this RD CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!,

• Smooth mandrel-bent intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 10 hp and 8 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Will not fit 2003 models w/ Manual Transmission
• Replacement air filter part number X-1014-BB
• 6061-T6 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 7.7 lbs./ft.
• Made in Pomona, California USA
• CARB EO #: D-476-5

This Part Fits:

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Replacement air filter part number X-1012-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• SuperNano-Web Dry Filter X-1012
• Made in Pomona, California USA
• CARB EO #: D-476-3

This Part Fits:

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Available with a polished or Black powder coated finish
• Dyno Proven gains of up to 6 hp and 8 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1034BLK or 1034RED
• Replacement air filter part number X-1018-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque up to 7.8 ft./lbs.
• Made in Pomona, California USA
• CARB EO #: D-476-5

This Part Fits:

Add easy horsepower to your ride with the Injen Technology IS Performance short ram Air Intake! Our engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer Horsepower increase. In addition to the impressive power increase, the Injen team has ensured that safe Air fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake it is our mandrel-bent aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Additionally, this kit also includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area, allowing for greater airflow and unbeatable filtration. This Injen IS performance intake provides the power you can hear! It is a truly an upgrade for intake noise and provides an aggressive throaty tone, especially when you put the hammer down. want to add a personalized touch? Well, you are in luck, we offer this kit in a polished finish or a powder-coated Black. Plus, just like any other injen air intake systems, this intake kit includes the unbeatable Injen limited Lifetime Warranty!

• Smooth mandrel-bent Intake piping eliminates restrictions and improves airflow
• Provides power gains while maintaining A/F ratios with no additional tuning
• Dyno Proven gains of up to 18 hp and 18 lb-ft. of torque
• Available with a polished or Black powder coated finish
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1035BLK or 1035RED
• Replacement air filter part number X-1017-BB
• T6-6061 Mandrel-bent aluminum intake tubing
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California USA
• Increased HP up to 18.1
• CARB EO #: D-476-4

This Part Fits:

SuperNano-Web Dry Air Filter: 'That's massive!' is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1300 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume, resulting in added power while keeping the installation process quick and simple.

• Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Intake scoop integration is designed to capture the largest amount of cool air for max performance
• Replacement air filter part number X-1108-BB (Dry) or X-1108-BR (Oiled Cotton)
• Simple drop-in installation can normally be completed within 20 minutes
• Air Filter attaches to the airbox using our patented TwistLok method
• Box seamlessly adapts to the OE inlet scoop without modification
• Fully serviceable 4.00" I.D. Injen SuperNano-Web dry air filter
• Manufactured from high-strength XLPE Roto-Molded Polyethylene
• Aggressive under hood appearance while maintaining an OE fit
• Dyno Proven gains of up to 10 hp and 9 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Reinforced automotive grade silicone couplers
• Designed to work with the stock calibration
• Injen Technology Limited Lifetime Warranty
• Aggressive intake growl under acceleration
• Made in Pomona California, USA

This Part Fits:

The ICON 2.5” suspension system is a great way to level your 4WD 2005-2016 Ford F250/350 Super Duty while improving ride quality and performance. This Stage 4 system is great for towing, rough construction site terrains, and country dirt roads all while keeping a smooth highway feel. ICON's Stage 4 System is comprised of dual rate coil springs, alignment cams for adding caster, adjustable track bar w/ bearing, dual steering stabilizer kit with ICON 2.0 Aluminum Series stabilizers, and ICON 2.5 Aluminum Series piggyback reservoir shocks front and rear. ICON 2.5" reservoir shocks ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market.

• Corrosion resistant, one-piece impact extruded aluminum shock bodies with 7/8" shafts
• Increased wheel travel and ride quality over stock with no change in towing capacity
• Adjustable trackbar for optimum front axle centering and minimizing deflection
• 100% Bolt-on system - no drilling, cutting or welding necessary for install
• ICON engineered dual rate coil springs with match tuned performance shocks
• Dual steering stabilizer kit for smooth wheel control while driving
• Application Specific Alignment Cams ensure proper Caster alignment
• Lifetime guarantee that coil springs won’t sag
• No drive shaft modifications required
• Less body-roll than stock

This Part Fits:

ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 5 system includes vehicle-specific tuned 2.5” coilover shocks featuring CDC Valves, extended travel & remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. The easy-to-adjust CDC Valve allows for end-user compression changes to provide optimal ride quality across all types of terrain and vehicle cargo configurations. These coilovers are also height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations. This Stage 5 kit also includes uniball tubular upper control arms, designed to give you extra droop with the extended travel coilovers. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5" of rear lift over stock. ICON 2.0 Aluminum Series remote reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 96-04 Toyota Tacoma 4WD/PreRunner Stage 4 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.

• 2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock cooling
• Front Coilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard
• Add-A-Leaf Kit replaces OE overload leaf spring for more compliant ride quality and 1.5" of rear lift
• Tubular UCAs for added strength, durability, and alignment correction for better drivability
• Vehicle specific tuned front and rear shocks for superior shock damping and control
• 100% Bolt-on system - no drilling, cutting, or welding necessary for install
• Corrosion resistant CAD plated coilover shock bodies with 7/8" shafts
• FK Rod End bearings for extended longevity and minimal deflection
• 2.0 Aluminum Series remote reservoir rear shocks with 5/8" shafts
• Adjustable coilovers provide up to 3.5" of front lift height
• UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint
• 6061 aircraft grade aluminum CNC machined components
• Extended Travel coilovers offer maximum wheel travel
• Increased wheel travel and ride quality over stock

This Part Fits:

The Stage 9 system includes vehicle-specific tuned 2.5 Series Extended Travel coilover shocks featuring a remote reservoir with CDCV for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” for 2005-2015 models or 0-2.75" for 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. Used in conjunction with the included ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON tubular upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, built in additional caster, and improved suspension component clearance. To increase the ride quality of the truck and gain additional droop travel, the ICON RXT multi-rate leaf springs are added to the rear. Designed with an additional leaf (included with kit) that can be exchanged or added to the pack to yield an additional 10-20% spring rate, this leaf spring is perfect for drivers seeking improved rear ride quality in an “unloaded” vehicle as well as those that are have outfitted their trucks with a significant amount of weight in the form of a bed rack, roof top tent, spare tires, parts, or other additions. To compliment this increase in rear wheel travel the Stage 9 system includes a unique 2.5 Aluminum Series remote reservoir shock with CDCV that features a side-mount eyelet that making it shorter in collapsed length, longer at extension, and still fits in the factory mounting location. A large ten-inch remote reservoir was added to aid in heat dissipation and resist shock fade during spirited driving. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.

• ICON RXT CDCV Rear Shock with unique side-mounted lower eyelet allows for increased travel (up to 20%) while utilizing factory mounting location
• ICON RXT Rear Shock with unique side-mounted lower eyelet allows for increased travel (up to 20%) while utilizing factory mounting location
• 2.5 Aluminum Series remote reservoir RXT rear shocks feature corrosion resistant anodized aluminum shock bodies with 7/8" shafts
• 2.5 Series front coilovers with remote reservoirs for improved shock cooling and consistent performance under hard use
• Adjustable coilovers provide up to 3.5" of front lift height on 2005-2015 models and up to 2.75" on 2016-2023 models
• All shock absorbers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard
• Multi-Rate Leaf Springs with 3 user-adjustable spring rates for unique vehicle configurations
• Tubular UCAs for added strength, durability, and alignment correction for better drivability
• Vehicle specific tuned front and rear shocks for superior shock damping and control
• Corrosion resistant CAD plated coilover shock bodies with 7/8" shafts
• FK Rod End bearings for extended longevity and minimal deflection
• UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint
• Extended Travel coilovers offer maximum wheel travel
• 6061 aircraft grade aluminum CNC machined components
• Increased wheel travel and ride quality over stock

This Part Fits:

Staying true to the ICON Alloys approach, the Hulse has been engineered to maximize caliper clearance and optimize wheel position for un-hindered suspension travel and steering function. Backspace dimensions and wheel offset have been strategically developed to reduce scrub radius, improving all-around handling and ride quality and making a set of these wheels the perfect complement to an ICON Vehicle Dynamics suspension system.

• Aluminum alloy construction provides strength properties that are well suited for off-road use
• Reduced unsprung weight and rotating mass improves on and off-road vehicle performance
• Double black powder coat powder coat finish for sleek looks and corrosion resistance
• Application-specific dimensions optimize vehicle dynamics and tire clearance
• Built specifically for HD applications, with a 4,000LB load rating
• Aggressive concave profile with 12-window design
• 18" x 9" in 8-lug bolt patterns

This Part Fits:

The ICON Vehicle Dynamics Ford 2023-2025 F-250 and F-350 Super Duty 4WD Radius Arm System is designed with adjustable caster cams allowing fine tuning of caster angle for optimum drivability. Their added caster allows for use with 2-6” of front lift over stock with the radius arm installed in the factory pivot, eliminating the need for caster bushings or radius arm drop brackets. They feature a sealed pivot bushing that minimizes road feedback and ensures a long life and quiet operation. Additionally, their fabricated, fully boxed design ensures strength and utilizes a profile optimized for tire clearance at full steering lock, making a 37” tall tire clear without coming in contact with the radius arm. For trucks equipped with OnBoard Scales ICON also offers sensor linkage brackets for specific height ranges that allows attachment of the OE sensor linkages to the ICON radius arm, ensuring proper function of that system.

• Ability to have a 5.5” backspace wheel with 37” tires without contact with the arm at steering lock
• Replaceable sealed pivot bushing provides maintenance free operation
• Built in caster adjustment for optimized return to center
• Ample caster range for 2-6" of front lift over stock
• CNC machined and laser cut steel components
• Semi-gloss black powder coat finish
• Fully boxed design

This Part Fits:

The ICON Vehicle Dynamics 2023-2025 Ford F-250 and F-350 Super Duty 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Ford Super Duty coil springs provide 2.5" of lift height and feature a dual rate design optimized for use with trucks equipped with diesel engines. The dual rate design allows for a softer initial rate for superb on-road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2023-2025 Ford Super Duty.

• Dual-stage, semi-gloss powder coat offers excellent corrosion resistance
• Dual rate coil springs improve on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• Lifetime warranty against sagging/breakage
• 2.5" lift height

This Part Fits:

Upgrade your vehicle's suspension with the HKS Hipermax S Coilover Kit (part number 80300-AN019), designed to replace the factory shocks and springs on your Nissan 300ZX Z32. Engineered to balance handling stability, reduced body roll, and daily street-driving comfort, this kit features a single-tube (monotube) upright damper layout for both the front and rear axles.

At the core of the Hipermax S is a Dual Preload Valve System (PVS) which improves response and smooths out harsh road vibrations, paired with a Wide Range (WR) needle that offers 30 distinct levels of manual damping force adjustment. The shock bodies are protected with HKS's signature PNE coating to deliver superior corrosion resistance, while heavy-duty rubber upper mounts control deflection. Full-length ride height adjustment is handled independently via the lower brackets, ensuring you can lower the vehicle without compromising shock stroke or changing spring preload.

Technical Specifications:

• Spring Rates: Front: 78 N/mm (8.0 kgf/mm) | Rear: 59 N/mm (6.0 kgf/mm)
• Spring Free Height: Front: 200 mm | Rear: 220 mm (barrel-shaped)
• Default Lowering (Out of Box): Front: -15 mm | Rear: -16 mm
• Ride Height Adjustment Range: Front: 0 mm to -64 mm | Rear: 0 mm to -82 mm
• Damper Type: Monotube (Upright) with 30-way adjustment

Confirmed Vehicle Fitment:

• Nissan 300ZX / Fairlady Z (Z32 Chassis: CZ32, GZ32, GCZ32)
• Model Years: 1989 to 1996 (USDM) / 1989 to 2000 (JDM)
• Engines: 3.0L NA (VG30DE) and 3.0L Twin-Turbo (VG30DETT) RWD
• Note: Fitment has not been tested or confirmed for Convertible models.

What's Included:

• 2x Fully assembled front coilovers (with main springs, bump stops, and rubber upper mounts)
• 2x Fully assembled rear coilovers (with barrel springs, bump stops, and rubber upper mounts)
• Height adjustment spanner wrenches
• Damping adjustment dials
• Installation and setup manual

High Performance Street disc brake pads are legendary for increasing stopping power on street-legal vehicles. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performances HPS braking compound. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20 to 40 percent more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you will have better pedal feel and more consistent performance in a durable brake pad that generates less brake dust.

• Excellent Modulation And Release Characteristics
• Provides Outstanding Lighter Weight Performance
• Preferring Split Friction Levels
• Perfect For Drivers
• DTC-60 Compound
• High Torque
• High Temp

High Performance Street disc brake pads are legendary for increasing stopping power on street-legal vehicles. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performances HPS braking compound. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20 to 40 percent more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you will have better pedal feel and more consistent performance in a durable brake pad that generates less brake dust.

• Performance Ceramic Compound
• Increased Stopping Power
• Stable Friction Output
• Increased Rotor Life
• Extremely Quiet
• Ultra-Low Dust

This Part Fits:

H&R Trak+ Wheel Spacers move your wheels out so they are flush with the fender-instantly giving your vehicle the perfect stance. Whether you want improved handling, increased safety, or simply want your car to make a statement about your individual style, Trak+ Wheel Spacers can help you accomplish your goal and GO WIDE. Manufactured from a special proprietary alloy that has a higher tensile strength than 6061-T6 billet aluminum, H&R Trak+ Wheel Spacers are hubcentric featuring a full contact hub-just like the factory hub-for even load force distribution and lateral support.

• Moves your wheels outward so they are flush with the fender, instantly giving you the perfect stance
• Hub centric design, proprietary alloy, higher strength, lighter weight
• Extended length hardware available
• made in Germany

This Part Fits:

H&R'sport Sway Bars are designed for drivers'who desire improved handling without lowering or affecting ride quality. H&R'sport Sway Bars increase your suspension's roll stiffness-or its resistance to roll in turns-while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R'sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness-giving you an unmatched level of precision and performance. Sway Bar Bushings: Available exclusively with H&R'sport Sway Bar kits. Our proprietary sway bar bushings feature a special urethane/Teflon composite that prevents squeaks and eliminates the need for lubrication. No mess, no maintenance, a perfect fit.

• Increases roll stiffness, resulting in reduced body roll, increases cornering performance, lateral grip, and stability
• Increased diameter over OE, one piece forged ends. Multiple adjustment positions for some applications
• (hf) 50CrV4 steel features faster response times and smooth transitional function
• Most applications include H&Rs legendary Poly/Teflon bushings
• made in Germany

This Part Fits:

Sport Spring kits are H&R's number one selling product. Enhance the look of your vehicle with a reduced fender well gap. H&R'sport Springs lower the vehicle's center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle's suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R'sport Springs are the number one upgrade for your vehicle.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• Progressive spring design, reduces ride height, superb ride quality
• Our top selling spring
• made in Germany

This Part Fits:

H&R Trak+ Wheel Spacers move your wheels out so they are flush with the fender-instantly giving your vehicle the perfect stance. Whether you want improved handling, increased safety, or simply want your car to make a statement about your individual style, Trak+ Wheel Spacers can help you accomplish your goal and GO WIDE. Manufactured from a special proprietary alloy that has a higher tensile strength than 6061-T6 billet aluminum, H&R Trak+ Wheel Spacers are hubcentric featuring a full contact hub-just like the factory hub-for even load force distribution and lateral support.

• Moves your wheels outward so they are flush with the fender, instantly giving you the perfect stance
• Hub centric design, proprietary alloy, higher strength, lighter weight
• Extended length hardware available
• made in Germany

This Part Fits:

H&R'street Performance Coil Overs are the perfect suspension'solution for discerning drivers-from daily drivers'to serious tuners-who can appreciate awesome handling and superb ride comfort. Each coil over shock is custom valved to work in conjunction with a precision-engineered progressive rate spring, creating a finely tuned suspension'system. The fully threaded shock body allows for adjustable vehicle height. This feature helps balance vehicle weight, resulting in a lower center of gravity and improved performance and control.

• Springs and dampers designed and engineered to offer great performance and awesome ride comfort
• allows fine tuning to your preference
• The original H&R coil over
• Height adjustable
• made in Germany

This Part Fits:

H&R Adventure Lift Springs: The desire to explore thrives inside us all. Which is why H&R ride development engineers have crafted lift springs for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

H&R Adventure Lift Springs: The desire to explore thrives inside us all. Which is why H&R ride development engineers have crafted lift springs for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits: