Correct your suspension geometry and improve handling with the Artec Industries Raised Track Bar Bracket, specifically engineered for front axles with a 3.5-inch (3-1/2") tube diameter. This heavy-duty bracket relocates the axle-side track bar mounting point to a higher position, an essential modification for lifted vehicles to keep the track bar and drag link parallel.

• Designed specifically for front axle tubes with a 3.5-inch diameter
• Raised mounting point corrects steering geometry and roll center on lifted applications
• Helps eliminate bump steer by restoring proper linkage alignment
• Heavy-duty construction suitable for custom axle swaps and off-road builds
• Precision-engineered for a weld-on installation

Designed for custom suspension fabrication and heavy-duty off-road builds, the Artec Industries Lower Link Axle Brackets provide a secure mounting point for your lower control arms. These brackets feature a 10-degree offset to help align the links with the chassis, reducing stress on rod ends and bushings while optimizing suspension geometry during articulation.

Built to withstand the rigors of rock crawling and trail use, these axle-end brackets are essential components for custom 3-link or 4-link setups. The 10-degree angle is specifically engineered for builders who need precise link orientation on solid axle swaps or custom axle builds.

• Manufacturer Part Number: BR1011
• Angle: 10 Degree Offset
• Quantity: Includes one pair (2 brackets)
• Application: Universal weld-on axle mounting for custom links

Fits 2007-2009 Mazda 3 Mazdaspeed.

The Cobb Exhaust Hanger Kit (MPN 571001) provides a direct replacement for the soft factory rubber hangers on the first-generation Mazdaspeed3. These upgraded hangers are designed to more securely locate your exhaust system, preventing excessive movement, swaying, and annoying rattles against the chassis or heat shields that often occur with age or during spirited driving.

• Direct replacement for OEM exhaust hangers
• Reduces exhaust system vibration and lateral movement
• Engineered for improved durability over factory rubber components
• Essential for securing aftermarket exhaust systems or stabilizing the stock setup
• Manufacturer Part Number: 571001

Replace soft, deteriorated factory rubber hangers with the Torque Solution High-Performance Polyurethane Exhaust Mount (TS-EH-012). This 12mm mount is engineered to provide a significantly stiffer connection than OEM components, effectively eliminating excessive exhaust movement, sway, and annoying rattles.

Constructed from high-density polyurethane, this mount is designed to withstand extreme undercar temperatures and resist chemical degradation from oil and road grime. It is a critical upgrade for vehicles with aftermarket exhaust systems where precise clearance and secure positioning are required to prevent contact with the chassis or bodywork.

• Direct replacement for standard 12mm exhaust hangers
• 75A durometer polyurethane construction for maximum durability
• Significantly reduces exhaust vibration and sway
• High temperature and chemical resistance
• Manufacturer Part Number: TS-EH-012

Fits 2018-2024 Jeep Wrangler JL and JLU (2-Door & 4-Door models).

Strengthen your vehicle's chassis with the Synergy Manufacturing Rear Track Bar Brace (8880-01). This heavy-duty reinforcement is engineered to address a common weak point in the JL platform: the factory frame-side track bar bracket. Under the stress of larger tires or aggressive off-road use, the stock mount can flex, deflect, or eventually crack and fail. This brace distributes lateral suspension loads more effectively, ensuring your track bar remains securely anchored.

• Reinforces the factory frame-side rear track bar mount to prevent bracket failure
• Improves suspension rigidity and rear-end stability by reducing mount deflection
• Laser-cut and CNC-bent construction for a precision fit over the OEM bracket
• Durable powder-coat finish provides superior corrosion and abrasion resistance
• Designed as a bolt-on solution for straightforward installation
• Manufacturer Part Number: 8880-01

Fits 1994-2002 Dodge Ram pickup trucks.

The Synergy Manufacturing Front Track Bar Conversion Bracket (8554-02) is a heavy-duty suspension component designed to upgrade the steering geometry on second-generation Dodge Ram trucks. This bracket facilitates the conversion of the factory track bar setup to a more robust design, helping to eliminate front-end wander and maintain precise axle alignment under load.

• Specifically designed for 1994-2002 Dodge Ram front-end applications
• Relocates the frame-side mounting point for improved track bar performance
• Heavy-duty construction for increased durability and steering response
• Compatible with track bar conversion upgrades to reduce common steering play
• Manufacturer Part Number: 8554-02

Fits 2024+ Toyota Tacoma models.

Cali Raised LED ditch light mounting brackets provide a secure, low-profile solution for mounting auxiliary LED pods to the A-pillar area of your 2024+ Toyota Tacoma. These brackets are engineered to bolt directly to the factory hood hinge mounting points, requiring no drilling or permanent modification to the vehicle. By positioning the lights at the base of the windshield, they allow for effective peripheral illumination without obstructing the driver's field of vision or interfering with wiper operation.

• Precision laser-cut and CNC bent for exact vehicle fitment
• Durable black powder-coat finish for long-term corrosion resistance
• Low-profile design minimizes wind noise and maintains sleek vehicle lines
• Bolts to factory mounting points for a straightforward installation
• Designed to accommodate most standard auxiliary LED pods
• Manufacturer Part Number: CR4050

Fits select 2008-2026 Subaru WRX, STI, and Impreza, and 2013-2026 Subaru BRZ and Toyota GR86.

Secure your exhaust system and eliminate unwanted movement with the PERRIN Standard Length Exhaust Hanger Kit. Factory rubber hangers are designed for comfort and are often too soft for performance applications, allowing the exhaust to sway during cornering or hard acceleration. This movement can lead to exhaust tips hitting the bumper cutout, mid-pipes rattling against the chassis, or even stress on the manifold and downpipe connections.

These PERRIN hangers are manufactured from high-durometer polyurethane, providing a much stiffer mounting solution than OEM rubber. The standard length design maintains the factory exhaust height while offering superior resistance to heat and chemicals, ensuring your exhaust stays properly aligned even with the added weight of an aftermarket cat-back system.

• Set of 5 standard length exhaust hangers
• High-durometer polyurethane construction reduces sway and vibration
• Prevents exhaust contact with the chassis and bodywork
• Standard length maintains original factory exhaust position
• Direct replacement for factory rubber components
• Manufacturer Part Number: PSP-EXT-701

Fits select 1999-2007 Ford F-250 and F-350 Super Duty trucks including XL, XLT, Lariat, King Ranch, and Harley-Davidson Edition trims.

Secure your front-end protection with Go Rhino RC2 Series mounting brackets. Engineered for a clean, professional look, these heavy-duty steel brackets are designed to bolt to the backside of the RC2 bull bar, keeping the mounting hardware virtually hidden from sight. These vehicle-specific brackets utilize factory mounting points to ensure a rigid fitment without the need for drilling on most applications.

• Specifically engineered for Go Rhino RC2 bull bars
• Heavy-duty steel construction for maximum durability
• Simple bolt-on installation requires no drilling
• Low-profile design hides brackets behind the bull bar
• Manufacturer Part Number: 55965

Fits 2010-2014 Hyundai Genesis Coupe (2.0T).

The Torque Solution Exhaust Mount Kit (TS-EH-GEN20) is engineered to replace flexible factory rubber hangers that allow for excessive exhaust movement and vibration. By securing the exhaust system more firmly to the chassis, this kit helps eliminate unwanted rattles, prevents exhaust tip misalignment, and reduces the stress placed on your exhaust hangers and weld points during spirited driving or under load.

• Direct replacement for original equipment exhaust hangers
• Reduces exhaust movement and sway
• Maintains consistent tip and piping alignment
• Designed specifically for the Genesis Coupe chassis
• Manufacturer Part Number: TS-EH-GEN20

Fits select 2008-2016 Subaru WRX and Impreza WRX models.

The PERRIN Intercooler Coupler Kit (PSP-ITR-321RD) is a high-performance replacement for the factory rubber couplers in your Subaru's charge air system. These red couplers provide a secure, airtight seal between the turbocharger, intercooler, and throttle body, preventing the boost leaks that often occur as original equipment ages or under increased pressure. Designed for a precision fit, this kit improves engine bay aesthetics while ensuring the reliability required for forced induction applications.

• Manufacturer Part Number: PSP-ITR-321RD
• Finish: Red
• Direct replacement for factory intercooler couplers
• Engineered for a leak-free seal under high boost pressure
• Compatible with 2008-2016 Subaru WRX / Impreza WRX platforms

The Torque Solution 10mm Exhaust Mount is engineered to replace soft factory rubber hangers that often allow excessive exhaust movement. By providing a more stable connection point, this high-density mount reduces exhaust sway and prevents the system from vibrating against the chassis or heat shields, a common issue when installing larger diameter aftermarket exhaust systems.

• Bore Diameter: 10mm
• Application: Universal fitment for 10mm hanger rods
• Reduces exhaust movement and prevents rattling
• Replaces worn or soft OE rubber bushings
• Manufacturer Part Number: TS-EH-010

Designed for the Nissan R-chassis platform, the Radium Engineering HICAS Line Retainer Kit provides a secure mounting solution for the factory steel hydraulic lines. Over time, original plastic underbody clips become brittle or snap during maintenance, leading to unsecured lines that are prone to vibration and fatigue.

This kit is engineered specifically to match the diameter and spacing of the OEM HICAS lines on the underside of the vehicle, ensuring a precise fit that maintains proper routing and clearance. Whether you are performing a restoration or a subframe service, these retainers provide the durability needed for high-performance applications.

• Fits Nissan R32, R33, and R34 chassis models
• Designed specifically for original steel HICAS lines
• Prevents line movement and underbody vibration
• Replaces aged or broken factory plastic retainers
• Manufacturer Part Number: 20-0627

Fits 2007-2015 Jeep Wrangler and Wrangler Unlimited JK models (Rubicon, Sahara, Sport, X, and 70th Anniversary).

Restore the secure mounting of your rear license plate with this Omix snap-in retaining nut. Designed to meet or exceed OE specifications, this metal nut replaces worn, stripped, or corroded factory hardware to ensure your license plate bracket remains firmly attached to the vehicle body. This is a direct-fit replacement featuring the correct OE style for a seamless repair.

• Manufacturer Part Number: 11233.12
• Replaces OE Number: 6036683AA
• Material: Metal
• Fitment Type: Direct Fit / OE Style
• Quantity: Sold individually (Note: 4 required for complete bracket installation)
• Warranty: Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler and Wrangler Unlimited (JK) including Rubicon, Sahara, Sport, and X models.

Upgrading to larger tires often leads to clearance issues with the factory rear bumper and puts excessive strain on the factory tire carrier. The Skyjacker STRJK212 Spare Tire Relocator Kit is engineered to reposition your spare tire for proper clearance, effectively reducing the mechanical load and stress on your Jeep's tailgate. This kit is a vital addition for JK owners running oversized wheel and tire combinations who want to preserve the integrity of their factory hinges and tailgate skin.

• Reduces leverage and mechanical load on the factory tailgate
• Provides necessary clearance for oversized spare tires and wheels
• Direct fit for 2007-2018 Jeep Wrangler JK/JKU chassis
• Designed to work with factory mounting points
• Manufacturer Part Number: STRJK212

The Nitrous Express 15728 Solenoid Bracket provides a clean, adjustable mounting solution for your nitrous system on 4150-series carburetors. This bracket installs directly between the carburetor and the intake manifold, creating a stable, professional platform for fuel and nitrous solenoids without the need for custom fabrication or drilling.

• Precision Adjustability: Each solenoid mount is designed to swivel on the main plate, allowing you to find the perfect orientation for optimal line routing and engine bay clearance.
• Direct Fitment: Engineered specifically for use with 4150 flange carburetors and matching intake manifolds.
• Robust Design: Provides a rigid mounting point to prevent solenoid vibration and ensure consistent performance under high-load conditions.
• MPN: 15728

Fits 2015-2019 Ford Mustang models.

Ensure your S550 Mustang meets track safety requirements with the BMR Suspension Bolt-On Parachute Mount (PM760H). Engineered for high-speed drag racing applications, this mount provides a rock-solid attachment point for your parachute system, essential for vehicles exceeding NHRA/IHRA speed thresholds. The bolt-on design allows for a straightforward installation to the chassis, providing a clean and reliable solution for managing high-speed deceleration.

• Direct bolt-on design utilizes factory mounting points for simplified installation
• Heavy-duty steel construction engineered to withstand deployment forces
• Durable Black Hammertone powdercoat finish provides superior corrosion resistance
• Designed specifically for the 2015-2019 S550 chassis
• Manufacturer Part Number: PM760H

Fits 2014-2023 Ram 2500 4WD models (all trims including Power Wagon, Rebel, Tradesman, and Laramie).

The Carli Suspension Rear Track Bar Drop Bracket is the essential solution for re-centering the rear axle and restoring proper suspension geometry after installing a 1-2" lift. By lowering the mounting point of the factory track bar, this bracket corrects the tracking arc to minimize rear-end shift and ensure the axle remains centered under the frame during suspension travel.

Engineered for maximum durability, this bracket is fabricated from 1/4" cold rolled steel and finished in a resilient black powdercoat to withstand harsh road conditions. The kit includes high-strength Grade 8 mounting hardware for a secure, bolt-on installation that maintains factory-level reliability.

• Provides geometry correction for 1-2" rear lift heights
• Re-centers the rear axle for improved handling and tracking
• Heavy-duty 1/4" cold rolled steel construction
• Durable black powdercoat finish for corrosion resistance
• Complete with Grade 8 mounting hardware
• Manufacturer Part Number: CS-DPRBDROP-14-R

Fits 2003-2010 Dodge Ram 2500 and 3500 4WD trucks equipped with 6-inch lift systems.

The Carli Track Bar Drop Bracket is engineered to restore proper front-end geometry on heavily lifted Dodge Ram trucks. Increasing ride height by 6 inches significantly alters the operating angle of the track bar, which often leads to axle shift and steering feedback. This heavy-duty drop bracket lowers the frame-side mounting point, helping to keep the track bar in phase with the drag link to ensure predictable handling and minimized bump steer.

• Manufactured from 1/4-inch cold rolled steel for superior structural rigidity
• Durable black powdercoat finish for long-term corrosion resistance
• Includes high-strength Grade 8 mounting hardware for a secure installation
• Designed specifically for 6-inch suspension lift heights
• Manufacturer Part Number: CS-DATBDROP6-03

Detailed Fitment:

• 2003, 2005-2010 Dodge Ram 2500 (Laramie, Power Wagon, SLT, Sport, ST, SXT, TRX, TRX4)
• 2003-2010 Dodge Ram 3500 (Laramie, SLT, Sport, ST, SXT, TRX4)

Fits 1997-2006 Jeep Wrangler (TJ) including Sahara, Sport, SE, X, Rubicon, and Unlimited models.

Eliminate the hood flutter common on Jeep Wranglers with these Rugged Ridge Aluminum Hood Catches. Over time, original equipment rubber latches degrade, stretch, and fail, causing the hood to bounce at highway speeds. These adjustable hood catches are constructed from high-strength aluminum for a rock-solid hold and feature a proportional design that complements your vehicle's factory styling.

Finished in a durable textured black powder coat, these latches are designed for a direct-fit installation, replacing your worn factory hardware without modification. Each set is engineered to provide a secure, stable closure while offering the adjustability needed to maintain proper tension on the hood seal.

• Manufacturer Part Number: 11210.18
• Material: Durable aluminum construction
• Finish: Textured Black powder coat
• Functional Design: Reduces or eliminates hood flutter at speed
• Adjustable: Allows for precise tensioning and fitment
• Installation: Direct bolt-on replacement for factory hardware
• Warranty: Limited 5-Year Warranty

Fits select 1993-2007 Subaru Impreza, WRX, STI, and 1998-2007 Forester models.

The PERRIN Long Length Exhaust Hanger Kit is designed to solve clearance issues common with oversized aftermarket exhaust systems or custom rear bumpers. By providing a longer drop than factory hangers, this kit allows the exhaust tip to sit lower, preventing heat damage to bodywork and eliminating rattles caused by contact with the chassis.

• Includes four (4) long-length exhaust hangers
• Increases clearance between the exhaust piping and the vehicle body
• Replaces soft, worn factory rubber hangers to better secure the exhaust
• Designed for high-stress applications and aftermarket exhaust fitment
• Manufacturer Part Number: PSP-EXT-760

Fits 2019-2023 Ford Ranger and 2022-2025 Ford Maverick (XL, XLT, Lariat, Lobo, and Tremor).

Securely mount your 16-inch Putco Hornet LED light bar with these vehicle-specific roof mounting brackets. Engineered for a seamless fit, these brackets utilize the factory third brake light housing as an attachment point, allowing for a complete installation without any drilling or cutting of the vehicle body. This ensures a clean, professional look while preserving the integrity of your truck's cab.

• Specifically designed to accommodate the 16" Putco Hornet LED light bar.
• CNC-machined from lightweight and durable 6061 aluminum for superior strength.
• Finished in a textured black powder coat for maximum corrosion resistance.
• No-drill installation using existing factory mounting locations for the third brake light.
• Includes all required mounting hardware for a straightforward bolt-on process.
• Manufactured in the USA by Putco in Des Moines, IA.
• Manufacturer Part Number: 950009

Fits select 2014-2026 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD models. This specialized mounting system allows for the secure installation of a Putco Hornet LED light bar without the need for drilling or cutting into the vehicle's bodywork.

Constructed from lightweight 6061 aluminum, these brackets are engineered for durability and corrosion resistance. The textured black powder coat finish provides a clean, factory-style appearance while protecting the metal from the elements. The system utilizes the existing 3rd brake light housing as a mounting point, ensuring a streamlined fit that maintains vehicle integrity. Each set includes all necessary high-grade hardware for a straightforward bolt-on installation.

• Part Number: 950002
• Material: 6061 Aluminum
• Finish: Textured Black Powder Coat
• IP Rating: IP67 Weatherproof
• Installation: No-drill, 3rd brake light housing mount
• Manufactured in Des Moines, IA

Fits 2014+ Ram trucks. The Synergy MFG Dual Steering Stabilizer Mounting Kit (8710-02) provides a robust, heavy-duty bracket system designed to enhance steering stability and reduce front-end shimmy, particularly on vehicles running oversized tires. By adding a second steering damper, this system helps neutralize steering feedback and protects your steering gearbox from excessive wear.

This kit is engineered for a direct bolt-on installation, utilizing precision-formed brackets to ensure proper geometry and clearance. It is a necessary upgrade for owners looking to eliminate "death wobble" tendencies and improve tracking on and off-road. Please note: this is a hardware mounting kit only; steering stabilizer cylinders are sold separately.

• Direct fit for 2014+ Ram models
• Reduces steering feedback and improves front-end control
• Heavy-duty construction designed to withstand off-road abuse
• Complete bolt-on kit includes all necessary mounting hardware
• Manufacturer Part Number: 8710-02

Fits select 2013-2024 Ram trucks.

The Synergy Manufacturing Dual Steering Stabilizer Bracket is engineered to provide a robust mounting solution for dual steering dampener configurations. This bracket is designed to improve steering feel and mitigate front-end shimmy or feedback, which is common when running oversized tires or high-clearance lift kits on heavy-duty Ram platforms.

• Enables the installation of dual steering stabilizers for increased dampening capacity
• Precision-engineered for 2013 and newer Ram steering geometry
• Constructed from high-strength steel for maximum durability under off-road conditions
• Direct-fit design utilizes factory mounting locations for a secure installation
• Finished in a durable coating to resist corrosion and road debris
• Manufacturer Part Number: 8710-01

Fits 2005-2007 Ford F-250 and F-350 Super Duty.

Carli Front Brake Line Relocation Tabs offer an economical solution for correcting brake line fitment on vehicles equipped with basic leveling systems. These tabs relocate the factory brake line mounting points to provide the necessary slack for increased suspension travel, preventing tension on the OEM lines without requiring a full replacement.

• Designed to maintain safe brake line geometry on leveled trucks
• Heavy-duty construction with a durable black powdercoat finish
• Includes high-strength Grade 8 mounting hardware for a secure installation
• Cost-effective alternative to extended aftermarket brake lines
• Manufacturer Part Number: CS-FBLT-05

Fits 2018-2023 Jeep Wrangler JL and Gladiator JT models.

The Synergy Manufacturing Front Track Bar and Sector Shaft Brace is engineered to eliminate frame-side track bar bracket deflection and prevent steering box sector shaft failure. On the Jeep JL and JT platforms, the steering box and track bar bracket are subject to high stress, especially when running larger tires or navigating technical terrain. This bolt-on brace ties these two critical points together, distributing loads more effectively across the frame to improve steering feel and long-term durability.

• Reinforces the frame-side track bar bracket to prevent fatigue and cracking
• Supports the steering box sector shaft to eliminate side-loading and steering wander
• Laser-cut and CNC-bent from high-strength steel for precise fitment
• Durable gray powder coat finish for maximum corrosion resistance
• 100% bolt-on installation using standard hand tools
• Compatible with most aftermarket track bars
• Manufacturer Part Number: 8869-01

Fits select 2013-2024 Ram trucks.

Protect your steering stabilizer from impact and trail damage with the Synergy Steering Stabilizer Relocation Bracket (MPN: 8703-02). On stock RAM configurations, the stabilizer is positioned low, leaving it vulnerable to rocks and debris. This bracket relocates the stabilizer mount on the axle side, moving the component up and out of harm's way to significantly improve ground clearance.

Constructed from high-strength steel and finished for long-term corrosion resistance, this bracket is engineered to withstand the rigors of off-road use. It provides a more secure mounting position, correcting the stabilizer geometry for vehicles with suspension modifications while maintaining compatibility with both factory and most aftermarket stabilizers.

• Relocates steering stabilizer to provide increased ground clearance and protection
• Heavy-duty steel construction for maximum rigidity and durability
• Simple bolt-on installation using existing factory mounting points
• Compatible with factory and many aftermarket steering stabilizers
• Manufacturer Part Number: 8703-02

Fits 2015-2025 Ford F-150 2WD/4WD models, including King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, STX, Tremor, XL, and XLT.

Transform the stance and handling of your late-model F-150 with the Ridetech 5.5-inch rear lowering kit. This system is engineered to provide a significant drop while maintaining proper suspension geometry. By relocating the rear axle, this kit achieves a level profile without sacrificing the utility of your truck.

Central to this kit are the Ridetech HQ Series shocks. These monotube dampers feature impact-extruded aluminum bodies and wide-range rebound adjustment, allowing you to fine-tune the ride quality to your specific load and driving style. Whether you are daily driving or towing, the HQ shocks provide superior oil control and heat dissipation compared to factory twin-tube units.

• MPN: 12299511
• Rear Drop: 5.5 inches
• Shock Series: HQ (Handling Quality) Series Shocks
• Drivetrain: Compatible with 2WD and 4WD models
• Construction: Heavy-duty hardware for reliable axle relocation
• Adjustability: 24-position rebound adjustment on shocks

Fits 2017+ Honda Civic Type-R models.

The Torque Solution Exhaust Hanger Mount Kit is designed to eliminate the excessive movement often found in factory rubber hangers. By replacing soft OE components with high-durometer polyurethane, this kit prevents exhaust sway, reduces rattle, and ensures your exhaust tips remain properly aligned during spirited driving or on-track use.

Constructed from 75A durometer polyurethane, these hangers are significantly more durable and stiffer than stock units. This makes them a critical upgrade for larger diameter or heavier aftermarket exhaust systems that require more stable support. This kit is a direct-fit replacement, bolting directly to the factory mounting points without modification.

• Specifically engineered for the 2017+ Honda Civic Type-R chassis
• Reduces exhaust movement and prevents component contact/rattling
• High-durometer 75A polyurethane construction for long-term durability
• Direct-fit replacement for factory rubber mounts
• Manufacturer Part Number: TS-EH-311