Fits select 2005-2014 Subaru Forester, Impreza, and Legacy models (including WRX, STI, and GT trims).

The Torque Solution Exhaust Mount Kit (TS-SU-0125) is engineered to replace soft factory rubber hangers that allow excessive exhaust movement. By providing a more rigid mounting point, these hangers prevent exhaust rattle and maintain correct clearance between the exhaust piping and the vehicle chassis. This kit is a direct-fit solution for high-performance builds or daily drivers with worn-out original equipment mounts.

• Manufacturer Part Number: TS-SU-0125
• Direct replacement for factory rubber exhaust hangers
• Reduces exhaust movement and vibration
• Built for long-term durability in high-heat environments
• Kit includes required hangers for a complete installation

The Torque Solution Exhaust Mount Kit (TS-SU-0124) is designed to eliminate excessive exhaust movement and prevent mid-pipe or muffler contact with the chassis. These high-stiffness mounts replace the soft factory rubber hangers, providing a more secure fitment for both OEM and aftermarket exhaust systems during spirited driving.

Fits select 1993-2008 Subaru Impreza, Forester, and Legacy models.

• Controls exhaust sway and vibration under high-load conditions
• Direct-fit replacement for flexible factory rubber bushings
• Improves exhaust system alignment and ground clearance
• Engineered for increased durability over standard OE mounts
• Manufacturer Part Number: TS-SU-0124

Fits select 2005-2014 Subaru Impreza WRX/STI and 2005-2009 Legacy GT models. These 12mm exhaust mounts are designed to eliminate the excessive movement often found in factory rubber hangers, which can lead to rattling, poor tip alignment, or exhaust contact with the chassis.

Constructed from high-grade polyurethane, these mounts provide a much stiffer connection between the exhaust system and the vehicle body. This is a critical upgrade for aftermarket exhaust systems with larger piping or heavier mufflers where maintaining precise clearance is essential. These hangers are a direct replacement for the OEM units and utilize 12mm mounting holes for a secure, bolt-on fit.

• Replaces soft factory rubber hangers to reduce exhaust sway
• High-durometer polyurethane construction for longevity and stiffness
• 12mm hanger hole diameter
• Direct fit for Subaru exhaust mounting points
• Manufacturer Part Number: TS-SU-012

Fits 2013-2017 Ford Focus ST.

The Torque Solution Exhaust Mount Kit (TS-ST-EHK) is engineered to replace the soft factory rubber hangers on the 2013-2017 Ford Focus ST. These heavy-duty mounts eliminate excessive exhaust movement, ensuring proper clearance and preventing unwanted rattles or contact with the chassis—a common issue when installing larger diameter aftermarket exhaust systems.

• Reduces exhaust vibration and sway for a more secure fit
• Direct replacement for OEM rubber exhaust hangers
• Improved durability over factory components for long-term performance
• Essential for high-performance and modified exhaust setups
• Manufacturer Part Number: TS-ST-EHK

Fits 2013+ Ford Focus ST MK3 models.

Secure your exhaust system and eliminate excessive movement with the Torque Solution Complete Hanger Kit. Factory rubber hangers are designed for comfort and often lack the stiffness required for high-performance driving or heavier aftermarket exhaust systems. These high-durometer polyurethane hangers provide a much more rigid mounting solution, ensuring your exhaust tips stay aligned and preventing the piping from contacting the chassis or rear bumper during hard cornering and acceleration.

• Direct replacement for soft factory rubber hangers
• High-quality polyurethane construction for maximum durability and heat resistance
• Eliminates exhaust sagging and reduces unwanted vibration
• Maintains precise exhaust tip alignment for a professional look
• Complete kit provides full vehicle coverage
• Manufacturer Part Number: TS-ST-618K

Fits 2013-2018 Ford Focus ST MK3.

The Torque Solution Billet Downpipe Hanger is engineered to eliminate the excessive exhaust movement common with factory rubber hangers. By replacing the soft OEM component with this rigid, precision-machined bracket, you prevent the downpipe from contacting the subframe or chassis, especially during hard acceleration and cornering. This upgrade reduces stress on your exhaust gaskets and turbocharger flange while providing a much more secure fitment for aftermarket high-flow downpipes.

• CNC machined 6061 billet aluminum construction
• Eliminates exhaust rattles and movement
• Direct replacement for the factory hanger unit
• High-strength hardware compatibility
• Corrosion-resistant finish
• Manufacturer Part Number: TS-ST-618

Fits 1990-1995 Mazda Miata (Base, LE, M Edition, and SE models).

The Torque Solution Exhaust Mount Kit (TS-MM-102) provides a direct-fit upgrade to replace the soft factory rubber hangers that typically stretch and deteriorate over time. By installing these high-strength mounts, you eliminate excessive exhaust movement and prevent the exhaust system from rattling against the chassis or swaying during aggressive cornering. These hangers are engineered to maintain correct exhaust alignment and provide a more secure connection to the vehicle's mounting points.

• Replaces soft factory rubber hangers to eliminate sway and rattle
• Designed specifically for the NA Miata chassis
• Maintains proper exhaust system alignment
• Direct bolt-on replacement for a secure fit
• Manufacturer Part Number: TS-MM-102

Fits select 2013-2017 Hyundai Veloster (1.6L).

The Torque Solution Exhaust Mount Kit is engineered to eliminate excessive movement in your exhaust system. Designed as a direct-fit solution for the Veloster's 1.6L platform, this kit replaces the soft factory hangers that are prone to stretching and wear. By providing a more stable mounting point, it prevents the exhaust from swaying or rattling against the chassis, ensuring your tailpipes stay aligned and secure during aggressive driving or over rough road surfaces.

• Direct replacement for OEM exhaust hangers
• Reduces exhaust movement and prevents vibration
• Constructed for increased durability over factory rubber
• Manufacturer Part Number: TS-HV-001

Authoritative Fitment:

• 2016 Hyundai Veloster Rally Edition
• 2013-2017 Hyundai Veloster Turbo
• 2014-2017 Hyundai Veloster Turbo R-Spec

Fits 2023+ Toyota GR Corolla.

The Torque Solution Exhaust Hanger Mount Kit is engineered to eliminate the excessive movement common with soft factory rubber hangers. These high-durometer polyurethane mounts provide a much more rigid connection, ensuring your exhaust system stays properly aligned and preventing the muffler from swaying or rattling against the chassis and rear diffuser during aggressive driving or track use. This kit is a recommended upgrade when installing larger-diameter aftermarket exhaust systems that require additional support.

• Direct replacement for OEM rubber exhaust hangers
• Constructed from high-grade polyurethane for maximum durability
• Significantly reduces exhaust sway and vibration
• Resistant to high exhaust temperatures and environmental contaminants
• Maintains exhaust tip alignment for a consistent look
• Manufacturer Part Number: TS-GR-EHK.2

Fits 2020+ Toyota GR Supra MKV A90 and A91 models.

The Torque Solution Billet Ride Height Bracket is engineered to correct suspension sensor geometry on lowered vehicles. When the MKV Supra is lowered, the factory ride height sensor linkage can often reach the end of its mechanical travel or provide inaccurate data to the chassis control systems. This bracket provides a precise relocation point for the sensor, ensuring that electronic suspension dampening and headlight leveling systems continue to operate within their intended parameters.

• CNC machined billet construction for maximum durability
• Maintains proper suspension sensor geometry on lowered vehicles
• Engineered specifically for the A90/A91 chassis
• Direct bolt-on installation
• Manufacturer Part Number: TS-GR-739

Fits 2023+ Toyota GR Corolla.

The Torque Solution Triangle Exhaust Hanger Mount (TS-GR-161) is engineered to replace the soft factory rubber hangers that allow for excessive movement in the exhaust system. By upgrading to this stiffer mount, you minimize exhaust sway and prevent the piping from contacting the chassis or rear bumper during high-load cornering and aggressive driving.

• Reduces exhaust vibration and movement
• Designed to handle the high heat and stresses of performance driving
• Direct replacement for the factory triangle-style hanger
• Simple installation into factory mounting points
• Manufacturer Part Number: TS-GR-161

Fits 1997-2006 Jeep Wrangler TJ and Unlimited models including Rubicon, Sahara, SE, Sport, and X.

Eliminate hood flutter and secure your front end with the Rugged Ridge Aluminum Hood Catch Kit. Designed as a heavy-duty, direct-fit replacement for worn or degraded factory rubber latches, these units feature an adjustable tension rod that allows for precise fitment and a rock-solid hold even at highway speeds.

Crafted from high-quality aluminum with a durable black finish, these catches are built to withstand the elements without fading or degrading like OE components. Installation is a straightforward bolt-on process using basic hand tools, mounting directly to the factory locations with the included stainless steel hardware.

• Finish: Black
• Material: Aluminum
• Hardware: Stainless Steel
• Adjustment: Threaded tension rod for custom tensioning
• Manufacturer Part Number: 11210.15
• Warranty: Limited 5-Year Warranty

Fits 2002-2006 Acura RSX Base and Type-S.

The Torque Solution Exhaust Mount Kit is designed to eliminate excessive exhaust movement and prevent the system from rattling against the chassis or heat shields. By replacing the compliant factory rubber hangers with high-durometer polyurethane mounts, this kit ensures your exhaust remains properly aligned and secure, even during aggressive driving or on vehicles equipped with heavier, large-diameter aftermarket piping.

• Direct replacement for OEM rubber exhaust hangers
• Manufactured from high-grade polyurethane for superior stiffness and durability
• Reduces exhaust sway and prevents contact with the underbody
• Engineered to withstand high heat and environmental degradation
• Manufacturer Part Number: TS-EHK-RSX

Fits 2000-2009 Honda S2000 (Base and CR).

The Torque Solution Exhaust Mount Kit (TS-EH-S2K) is engineered to eliminate the excessive movement often found with aged or soft factory rubber hangers. By providing a more stable mounting point, these high-density mounts prevent your exhaust system from vibrating, rattling against the chassis, or misaligning within the rear bumper cutouts. This kit is a direct replacement for the original equipment, offering a more secure fitment for both stock and aftermarket exhaust systems.

• Direct replacement for OE rubber exhaust hangers
• Reduces exhaust play and unwanted movement
• High-density construction resists sagging and wear
• Prevents exhaust rattles and bumper contact
• Manufacturer Part Number: TS-EH-S2K

The Torque Solution Exhaust Mount (TS-EH-M12) provides a high-performance alternative to soft factory rubber hangers on select Mitsubishi models. By upgrading to a high-durometer polyurethane mount, you effectively eliminate excessive exhaust movement and sway that can lead to rattling or contact between the exhaust tips and the rear bumper during aggressive driving or high-load conditions.

• Direct replacement for compliant OEM rubber exhaust hangers
• Constructed from high-grade polyurethane for maximum durability and heat resistance
• Minimizes exhaust system vibration and movement
• Ensures consistent exhaust tip alignment and prevents chassis contact
• Manufacturer Part Number: TS-EH-M12

The Torque Solution Exhaust Mount (TS-EH-M11) is engineered to provide a secure mounting solution for your vehicle's exhaust system. By replacing soft factory rubber hangers, this mount significantly reduces excessive exhaust movement, preventing the system from rattling against the chassis or misaligning the exhaust tips during spirited driving.

• Direct replacement for original equipment exhaust hangers
• Minimizes system vibration and sway for improved clearance
• Designed to withstand the thermal and physical stresses of performance applications
• Manufacturer Part Number: TS-EH-M11

Fits 2008-2015 Mitsubishi Lancer Evolution X models, including GSR, MR, MR Touring, and Final Edition.

The Torque Solution Exhaust Mount Kit (MPN: TS-EH-EVOXS) is engineered to replace the soft factory rubber hangers that allow excessive exhaust movement. By upgrading to these stiffer mounts, you stabilize your exhaust system, ensuring it stays properly aligned and preventing the piping from contacting the chassis or bumper during aggressive cornering or high-load conditions. These are a direct-fit solution for enthusiasts looking to eliminate rattles and improve the overall rigidity of both OEM and aftermarket exhaust setups.

• Reduces exhaust movement and vibration
• Direct replacement for original factory hangers
• Designed for high-performance street and track use
• Includes all necessary mounts for a complete installation
• Manufacturer Part Number: TS-EH-EVOXS

Eliminate excessive exhaust movement and prevent rattling with the Torque Solution Exhaust Mount Kit for the 2008-2015 Mitsubishi Lancer Evolution X. These high-performance hangers are engineered to replace the soft factory rubber mounts that often sag under the weight of aftermarket exhaust systems. By stiffening the exhaust path, this kit reduces stress on the exhaust manifold and downpipe while ensuring consistent tip alignment.

• Replaces worn or soft OE rubber exhaust hangers
• Constructed from high-durometer polyurethane for increased longevity and rigidity
• Reduces exhaust vibration and lateral sway during aggressive driving
• Direct fit for street and track applications
• Manufacturer Part Number: TS-EH-EVOX

Fitment: Fits 2008-2015 Mitsubishi Lancer Evolution X (GSR, MR, MR Touring, and Final Edition).

Fits select 2016+ Honda Civic and Civic SI Coupe models.

The Torque Solution Exhaust Hanger Mount Kit (TS-EH-310) replaces the flexible factory mounts to stabilize your exhaust system. Reducing excessive exhaust movement is critical for preventing chassis rattles, protecting mid-pipe clearance, and keeping exhaust tips properly centered within the rear bumper cutouts. This direct-fit kit is designed specifically for the Civic Coupe chassis to provide a more rigid mounting solution than standard OE components, ensuring your exhaust remains secure during spirited driving.

• Direct replacement for factory rubber exhaust hangers
• Specifically engineered for 2016+ Honda Civic Coupe chassis
• Reduces exhaust sway and vibration to prevent body contact
• Maintains consistent exhaust tip alignment
• Manufacturer Part Number: TS-EH-310

Fits 2016+ Honda Civic Sedan models, including the Civic Si Sedan (Sedan only).

The Torque Solution Exhaust Hanger Mount Kit (TS-EH-309) is engineered to replace soft factory rubber hangers that allow for excessive exhaust movement, vibration, and sagging. By utilizing a high-durability, stiffer compound, these mounts secure your exhaust system firmly in place, ensuring consistent clearance from the chassis and preventing annoying rattles.

• Reduces exhaust movement and system vibration
• Eliminates exhaust rattle and sagging issues
• Direct replacement for OEM rubber hangers
• Designed specifically for Sedan chassis configurations
• Manufacturer Part Number: TS-EH-309

This kit is a recommended upgrade for vehicles equipped with larger, heavier aftermarket exhaust systems where factory mounts often fail to provide adequate support.

Fits select 2012-2015 Honda Civic models, including DX, EX, EX-L, GX, HF, Hybrid, LX, Natural Gas, SE, and Si.

The Torque Solution Exhaust Mount Kit (TS-EH-303) is designed to stabilize your exhaust system by replacing the soft factory rubber hangers. These high-strength mounts minimize exhaust movement and vibration, preventing the piping from contacting the chassis or bodywork during hard cornering and acceleration.

• Direct replacement for OE rubber exhaust hangers
• Reduces exhaust sway and eliminates potential rattling
• Designed for increased durability under high heat conditions
• Manufacturer Part Number: TS-EH-303

Fits 1994-2001 Acura Integra GS, GS-R, LS, RS, Special Edition, and Type R.

The Torque Solution Exhaust Mount Kit is an essential upgrade for any 3rd generation Integra enthusiast looking to eliminate exhaust movement and sagging. Factory rubber hangers are prone to softening over time, which leads to excessive vibration, chassis rattling, and misaligned exhaust tips that can melt rear bumper plastics. These high-performance mounts provide a much firmer hold than OE components, ensuring your exhaust system stays exactly where it belongs during spirited driving or track use.

Designed as a direct replacement for the original hangers, this kit installs onto factory mounting points with no modification required. Whether you are running a stock setup or a heavy aftermarket cat-back system, these mounts offer the durability and stiffness needed to maintain proper clearance and reduce stress on exhaust welds and hangers.

• Eliminates excessive exhaust movement and vibration
• Prevents exhaust tips from rattling against the chassis or bumper
• Direct-fit replacement for factory rubber hangers
• Ideal for both stock and high-performance aftermarket exhausts
• Manufacturer Part Number: TS-EH-302

Fits 2006-2011 Honda Civic DX, EX, EX-L, GX, Hybrid, LX, LX-S, and Si models.

Eliminate excessive exhaust sway and prevent rattling with the Torque Solution Exhaust Mount Kit. Factory rubber hangers are often too pliable, allowing the exhaust system to move during aggressive cornering or shift under heavy load. This movement can lead to the exhaust contacting the chassis or causing damage to bumper cutouts.

These high-durometer polyurethane hangers provide a significantly stiffer connection than original equipment (OE) rubber. They are engineered to withstand high temperatures and resist degradation from road salts and oils, ensuring your exhaust remains properly aligned and secure for the long term.

• Direct replacement for soft factory rubber mounts
• Reduces exhaust vibration and movement
• Constructed from high-grade polyurethane material
• Designed for high-heat resistance and durability
• Manufacturer Part Number: TS-EH-301

Fits 1992-2000 Honda Civic (CX, DX, EX, GX, HX, LX, Si, VX, and Value Package).

The Torque Solution Exhaust Mount Kit (TS-EH-300) is designed to replace the compliant factory rubber hangers on your vehicle. These mounts provide a more secure mounting solution for your exhaust system by minimizing excessive movement and vibration. This kit helps prevent the exhaust from contacting other chassis components or rattling during operation, which is common in both stock and modified configurations.

• Direct replacement for original equipment exhaust hangers
• Significantly reduces exhaust sway and vibration
• Improves exhaust system stability and alignment
• Complete kit tailored for the 1992-2000 Honda Civic chassis
• Manufacturer Part Number: TS-EH-300

Fits select 2013-2017 Scion FR-S, Subaru BRZ, and Toyota 86.

The Torque Solution Exhaust Mount Kit (TS-EH-203) is engineered to replace soft factory rubber hangers that allow for excessive exhaust movement. By upgrading to these high-durability mounts, you eliminate the common rattling and chassis contact associated with performance exhaust systems, especially during aggressive driving or track use. These mounts ensure your exhaust tips remain centered and properly aligned while significantly reducing vibration transfer.

• Direct replacement for OEM exhaust hangers
• Reduces exhaust system sway and movement
• Eliminates exhaust-to-chassis rattling and clearance issues
• Durable construction designed to withstand high heat and road grime
• Manufacturer Part Number: TS-EH-203

Fits 2013-2017 Subaru BRZ, Scion FR-S, and Toyota 86.

The Torque Solution Exhaust Mount Kit (TS-EH-202) replaces your soft, factory rubber hangers to significantly reduce exhaust system movement. Excessive sway can lead to rattling against the chassis or heat damage to the rear bumper; this kit secures the exhaust to maintain proper alignment during aggressive driving.

• Replaces worn or soft factory exhaust hangers
• Reduces exhaust vibration and drivetrain movement
• Prevents exhaust-to-chassis contact
• Designed for long-term durability under high heat
• Manufacturer Part Number: TS-EH-202

The Torque Solution Exhaust Mount Kit (TS-EH-201) is engineered to eliminate excessive exhaust movement and prevent hanger sag on the 2011-2013 Scion tC. By replacing the soft factory rubber mounts, this kit provides a more stable connection to the chassis, ensuring your exhaust system stays properly aligned and reducing the risk of the piping contacting the bumper or subframe during spirited driving.

These mounts are a direct replacement for the original equipment, offering increased durability and a firmer hold that is essential for both factory setups and heavier aftermarket exhaust systems. This kit helps maintain consistent clearances and reduces drone caused by vibrating exhaust components.

• Fits 2011-2013 Scion tC Base
• Reduces exhaust movement and prevents system sag
• Direct replacement for factory rubber hangers
• Maintains proper exhaust tip alignment
• Manufacturer Part Number: TS-EH-201

The Torque Solution Exhaust Mount (TS-EH-012L4) is a high-performance upgrade designed to replace soft, sagging factory rubber hangers. Engineered for enthusiasts with aftermarket exhaust systems or those experiencing excessive tailpipe movement, these mounts are constructed from high-grade 75A durometer polyurethane. This material provides significantly more rigidity than OEM rubber, effectively eliminating exhaust swing and preventing the system from contacting the chassis or bodywork during high-load driving.

This "Long" version features an extended length to provide additional clearance for custom exhaust setups or to lower the piping away from heat-sensitive bumpers and body panels. Unlike standard rubber, this polyurethane compound is resistant to road chemicals and high heat, ensuring it will not crack or deteriorate over time.

• Eliminates exhaust movement and vibration-induced rattles
• Constructed from high-grade 75A durometer polyurethane
• Extended 12mm length for improved fitment and clearance
• Direct replacement for vehicles utilizing 12mm hanger rods
• Manufacturer Part Number: TS-EH-012L4

Fits 2005-2006 Mitsubishi Lancer Evolution (MR, RS, SE).

The Torque Solution Exhaust Mount Kit (TS-EH-004) is engineered to eliminate the excessive movement and vibration common with soft, factory-issued rubber hangers. By replacing worn OE mounts with these high-performance components, you ensure your exhaust system stays securely aligned, even under high-load or track conditions. This stabilization protects your vehicle by preventing the tailpipe from rattling against the chassis or shifting into the rear bumper trim.

• Direct replacement for factory rubber hangers
• Significant reduction in exhaust movement and sway
• Protects bumper and chassis from exhaust contact and heat damage
• Designed to maintain proper exhaust alignment
• Manufacturer Part Number: TS-EH-004

Restores proper steering geometry and improves handling on lifted 2018-2024 Jeep Wrangler JL and Gladiator JT models. The Synergy Manufacturing Front Track Bar Relocation Bracket (8855-11) is designed to raise the axle-side track bar mounting point, keeping it parallel with the drag link to eliminate bump steer and optimize the vehicle's roll center.

• Fits 2018-2024 Jeep Wrangler JL and Gladiator JT (all trims)
• Raises axle-side track bar mount to match drag link angle
• Corrects steering geometry to eliminate bump steer and improve stability
• Direct bolt-on installation using factory mounting points
• Heavy-duty construction designed for off-road durability
• Manufacturer Part Number: 8855-11