Fits 2018-2024 Jeep Wrangler JL and JLU models.

The Synergy Manufacturing Parking Brake Cable Relocation Bracket (8818-01) is a critical addition for lifted Jeep JLs. When increasing ride height or installing long-travel suspension, the factory parking brake cables often become the limiting factor during suspension droop, leading to binding or potential cable failure. This bracket relocates the cable mounting points to provide the necessary slack for unrestricted suspension cycling.

• Prevents parking brake cable binding and tension on lifted vehicles
• Relocates mounting points to accommodate increased suspension travel
• Laser-cut and CNC bent from high-strength steel for precise fitment
• Clear zinc plated for long-lasting corrosion resistance
• Simple bolt-on installation using factory mounting locations
• Manufacturer Part Number: 8818-01

Fits select 2014-2024 Ram 2500 4WD trucks.

The Synergy Manufacturing Front Radius Arm Drop Brackets (8730-03) are engineered to correct suspension geometry on lifted Ram 2500 applications. By lowering the radius arm mounting points at the frame, these brackets restore factory caster settings and improve overall ride quality. Correcting the arm angle reduces the harshness felt when hitting bumps and eliminates the "flighty" steering feel often associated with suspension lifts.

Constructed from heavy-duty steel and finished with a durable powder coat, these brackets are designed to withstand off-road use while maintaining precise alignment tolerances. The design utilizes factory mounting locations for a secure, bolt-on installation that avoids the need for permanent frame modifications.

• Corrects caster on lifted 2014+ Ram 2500 models
• Restores factory radius arm geometry for improved ride quality
• Heavy-duty steel construction with a durable finish
• Bolt-on installation into factory mounting points
• Manufacturer Part Number: 8730-03

Fits 2007-2018 Jeep Wrangler JK and JKU (2-door & 4-door models).

The Synergy 8072-01 Weld-On Rear Track Bar Bracket is engineered to correct suspension geometry and improve roll center on lifted 2007-2018 Jeep Wrangler JK models. By raising the track bar mounting point at the axle, this bracket helps level the track bar to reduce body roll and improve handling predictability. This heavy-duty weld-on solution is more robust than bolt-on alternatives, providing a permanent fix for the factory axle mount which is frequently prone to fatigue or failure under off-road stress.

• Corrects rear roll center geometry to improve vehicle stability and handling
• Heavy-duty steel construction ensures long-term durability in harsh environments
• Weld-on design provides a high-strength, permanent attachment to the rear axle
• Replaces or reinforces the weak factory track bar mount
• Precision laser-cut for exact fitment on the JK axle housing
• Manufacturer Part Number: 8072-01

Fits 2007-2018 Jeep Wrangler JK and JKU models.

The Synergy Manufacturing Front Track Bar Bracket is engineered to correct suspension geometry on lifted Jeep Wrangler JK models. This heavy-duty bracket relocates the track bar mounting point on the axle to help center the front housing and restore the parallel relationship between the track bar and drag link. Proper alignment of these components is essential for maintaining steering predictability and reducing the risk of bump steer or death wobble in modified vehicles.

• Laser-cut and CNC-bent from high-strength steel for durability under off-road stress.
• Designed to bolt onto the factory axle housing for a secure fitment.
• Helps maintain correct roll center and axle centering after a suspension lift.
• Durable finish to resist corrosion and environmental wear.
• Manufacturer Part Number: 8055

Fits 2007-2018 Jeep Wrangler JK and JKU (2-door and 4-door) models.

The Synergy Front Lower Shock Extension Brackets (8015) provide a reliable solution for maintaining proper suspension geometry after installing a lift kit. These brackets relocate the lower mounting point of the front shocks, allowing you to retain the factory shock absorbers or use shocks designed for a shorter travel range on a lifted vehicle. This modification helps prevent the shocks from overextending during off-road articulation, preserving the internal valving and seals.

• Manufactured from heavy-duty steel for high-strength durability on the trail
• Laser-cut and CNC-bent for precise fitment over factory axle mounts
• Simple bolt-on installation using existing hardware and mounting points
• Helps maximize suspension droop travel on lifted applications
• Designed to work in conjunction with stock or aftermarket front shocks
• Manufacturer Part Number: 8015

Fits 2007-2018 Jeep Wrangler JK and JKU models equipped with 3.0-inch OD axle housings.

Synergy HD Front Lower Control Arm Brackets provide a rugged solution for replacing or upgrading the vulnerable factory mounts on your Wrangler JK front axle. These brackets are engineered to withstand the impacts and stresses of off-road use, offering significantly more strength and rigidity than the original thin-gauge stamped steel components. Whether you are repairing a damaged mount or building a custom axle, these heavy-duty brackets ensure your front suspension geometry remains secure.

• Designed specifically for 3.0-inch outside diameter (OD) axle housings
• Heavy-duty steel construction for superior durability over OE mounts
• Precision CNC laser cut and formed for accurate fitment
• Direct replacement for factory front lower control arm brackets
• Manufacturer Part Number: 8009-02

Fits 2007-2018 Jeep Wrangler JK and JKU models.

The Synergy Manufacturing Fox Steering Stabilizer Relocation Bracket (8007) is engineered to move your steering stabilizer up and out of harm's way. On the Jeep JK platform, the factory stabilizer mounting position is notoriously low, leaving the stabilizer body and shaft vulnerable to impact from rocks and trail obstacles. This bracket relocates the stabilizer to a higher, more protected position above the tie rod, significantly reducing the risk of a bent shaft or fluid leak during off-road excursions.

• Specifically designed for compatibility with Fox steering stabilizers
• Moves the stabilizer to a high-mount position to prevent trail damage
• CNC laser cut and bent from high-strength steel for maximum rigidity
• Durable powder coat finish for superior corrosion and abrasion resistance
• Simple bolt-on installation to the factory axle brackets
• Manufacturer Part Number: 8007

Fits select 1988-2000 Chevrolet C1500, C2500, C3500, K1500, K2500, K3500, Tahoe and GMC Sierra, Yukon models.

The Lund EZ Running Board Mounting Bracket Kit (MPN: 300048) provides a vehicle-specific foundation for your side steps. Engineered with heavy-duty solid U-channel steel, these brackets are built to handle the rigors of daily use without flexing or sagging. This kit utilizes installer-preferred body mount designs to ensure a precise fit and long-term structural integrity.

• Heavy-Duty Steel: Solid U-channel steel construction for maximum durability and secure support.
• Custom Fit: Precision-engineered for 1988-2000 GM full-size trucks and SUVs for a streamlined installation.
• Body Mount Design: Uses factory-preferred mounting points; no drilling required on most applications.
• Compatibility: Specifically recommended for running boards with a backlip.
• Warranty: Protected by a Limited Lifetime Warranty.
• MPN: 300048

Note: Running boards are sold separately.

The Spectre Air Intake Support Bracket Kit (MPN 9702) provides a versatile solution for stabilizing and securing 4-inch outside diameter intake systems and air filters. Designed to anchor your intake to existing engine or fender bolts, this kit prevents movement and stress on intake components, ensuring a secure fit in custom or universal applications.

Constructed from polished aluminum for durability and a clean engine bay aesthetic, this bracket kit features a fully adjustable design. The studs and tubes can be adjusted to any length or angle, offering infinite configuration options to clear obstacles in the engine compartment. For installation, the bracket can be welded directly to aluminum intake tubes or integrated using standard couplers.

• Fits any 4-inch outside diameter (OD) intake system or air filter
• Manufactured from high-quality polished aluminum
• Universal design attaches to existing engine or fender mounting points
• Adjustable hardware for infinite mounting angles and custom lengths
• Versatile installation: weldable or compatible with couplers
• Manufacturer Part Number: 9702

The Spectre 24283 Adjustable Throttle Cable Bracket provides a versatile solution for securing throttle linkages during carburetor swaps. Engineered for maximum flexibility, this bracket is fully adjustable to accommodate various carburetor configurations and heights. To ensure reliable performance and prevent shifting during operation, it features an integrated set screw that locks the bracket firmly in place, eliminating unwanted movement.

This component is designed to work with both 2-barrel and 4-barrel carburetors and is compatible with vehicles running manual or automatic transmissions. The triple chrome-plated finish provides a high-luster look while offering durable corrosion resistance in the engine bay.

• Manufacturer Part Number: 24283
• Compatibility: Fits 2-barrel and 4-barrel carburetors
• Transmission Type: Manual and automatic transmission compatible
• Finish: Triple chrome plated for durability and appearance
• Adjustment: Fully adjustable design for precise cable alignment
• Hardware: Includes set screw to eliminate bracket movement

Fits select 1986-2005 Acura and Honda vehicles, including Integra, Civic, CRX, Prelude, and CR-V models equipped with B-Series engine swaps or factory configurations using Skunk2 Ultra Series intake manifolds.

The Skunk2 B-Series Throttle Cable Bracket is engineered specifically for use with Skunk2 Ultra Series Street and Ultra Series Race manifolds. In high-performance and race applications, finding a secure, reliable mounting point for the throttle cable often requires time-consuming custom fabrication. This bracket eliminates that need, providing a bolt-on solution that maintains correct cable geometry and tension for precise throttle response.

• Designed exclusively for Skunk2 Ultra Series Street and Race Manifolds
• Eliminates the need for custom-fabricated throttle brackets
• Ensures proper cable alignment and consistent throttle operation
• Engineered for B-Series engine platforms
• Manufacturer Part Number: 307-05-9560

Fits 2003-2006 Jeep Wrangler TJ and Wrangler Unlimited LJ models.

Keep your communication gear accessible and out of the way with the Rugged Ridge CB Radio Windshield Mount. Standard dash-mounted setups often interfere with passenger legroom or require reaching across the cabin during technical maneuvers. This bracket relocates your CB radio to a centralized, ergonomic position directly above the rearview mirror, significantly improving visibility and ease of channel adjustment while on the trail.

Engineered for a straightforward bolt-on installation, this bracket mounts directly to the factory footman loop with no drilling or permanent vehicle modifications required. It features a universal mounting pattern designed to accept the hanging brackets provided by most major CB radio manufacturers. The included black zinc-coated hardware ensures a clean, professional finish that resists corrosion in open-top environments.

• Positions radio above the rearview mirror for superior ergonomics and visibility
• Mounts directly to factory footman loop mounting points
• No-drill installation requires no vehicle modifications
• Universal mounting pattern compatible with most CB radio hanging brackets
• Includes corrosion-resistant black zinc-coated hardware
• Manufacturer Part Number: 13551.07
• Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited (Rubicon, Sahara, Sport, X, and Anniversary editions).

The Rugged Ridge CB Radio Mount provides a secure and accessible mounting solution for your transceiver without cluttering your dashboard. By utilizing the factory footman loop mounting points, this bracket positions your CB radio above the rearview mirror for high visibility and easy access while on the trail.

Designed for a clean, professional-grade installation, this mount features a built-in hooked end to keep your CB handset cord organized and out of the way of your gear shifter. The heavy-duty steel construction ensures your radio stays planted during off-road vibration, and the bolt-on design allows for a quick installation with no drilling or interior modification required.

• Mounts directly to the factory footman loop for a stable fit
• Integrated hooked end secures the CB microphone handset cord
• Convenient overhead positioning for easy channel adjustments
• Simple bolt-on application requires no drilling or cutting
• Manufacturer Part Number: 11503.95
• Limited 5-Year Warranty

Fits 2007-2025 Jeep Wrangler JK/JL and 2020-2025 Jeep Gladiator JT.

The Rugged Ridge Aluminum Locking Hood Catch Kit is a functional and aesthetic upgrade designed to eliminate the common issue of hood flutter at highway speeds. Constructed from high-quality cast aluminum, these catches provide a rigid, secure connection that replaces the flexible factory rubber latches. Each catch features an adjustable torsion rod, allowing you to fine-tune the tension for a precise, rattle-free fit on your specific hood and fender alignment.

This kit incorporates a locking mechanism to provide an added layer of security for your engine bay components. Installation is straightforward, utilizing basic hand tools and factory mounting points for a bolt-on fit without the need for drilling.

• Constructed from durable cast aluminum for long-term weather resistance
• Adjustable torsion rod ensures a tight, custom fit
• Reduces hood flutter and vibration on and off-road
• Includes locking cylinders and keys for enhanced engine bay security
• Manufacturer Part Number: 11210.32
• US Patent: D692,290

Fits 2018-2026 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT (including 4xe, Rubicon, Mojave, and Sahara models).

Rugged Ridge Aluminum Hood Catches provide a functional and aesthetic upgrade to the factory latches. Engineered to eliminate the common issue of hood flutter at highway speeds, these catches feature a high-quality cast aluminum construction for superior durability. Each catch is equipped with an adjustable torsion rod, allowing you to set a precise fit and maintain consistent tension on the hood seal.

Finished in a durable black powder coat, these catches offer a rugged, muscular look that resists corrosion and weather. Installation is a straightforward process using simple hand tools, as the kit is designed as a direct-fit replacement for the OE units. The assembly is protected under US Patent D692,290.

• Manufactured from high-quality cast aluminum
• Durable black powder coat finish
• Integrated adjustable torsion rod for precise fitment
• Direct-fit replacement for factory hood catches
• Includes all necessary installation hardware
• Manufacturer Part Number: 11210.21
• Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited models including Rubicon, Sahara, Sport, and X.

Eliminate the common issue of hood flutter at highway speeds with these Rugged Ridge replacement hood catches. Designed to provide a secure, rigid hold on the hood, these catches are manufactured from high-quality aluminum with a durable black finish. The included stainless steel hardware ensures long-term resistance to corrosion and environmental wear, offering a significant upgrade over the factory rubber components.

• Direct replacement for factory hood catches
• Constructed from durable aluminum with a black finish
• Includes corrosion-resistant stainless steel hardware
• Reduces or eliminates highway hood flutter
• Manufacturer Part Number: 11210.11
• Limited 5-year warranty

Fits 1946-1995 Jeep Willys, CJ-2, CJ-3, CJ-5, CJ-6, CJ-7, Scrambler, and Wrangler models.

Restore the security of your vehicle's hood with this Rugged Ridge semi-gloss black hood catch kit. Designed as a direct-fit replacement for factory latches that have become stretched, weathered, or broken over time, these catches eliminate hood flutter and ensure a reliable closure. Each component is finished with a durable black powder coating to resist corrosion and withstand harsh off-road environments.

This kit is engineered for a straightforward bolt-on installation using basic hand tools, utilizing the factory mounting locations for a clean look. The set includes both the driver and passenger side hood catches along with all necessary mounting hardware to complete the job.

• Finish: Semi-gloss black powder coat
• Configuration: Pair (driver and passenger side)
• Installation: Bolt-on replacement for OE hardware
• Manufacturer Part Number: 11210.01
• Warranty: Limited 5-year manufacturer warranty

Fits 2007-2018 Jeep Wrangler and Wrangler JK models, including Rubicon, Sahara, Sport, and Unlimited trims.

Replace worn or faded factory hardware with the Rugged Ridge Polished Stainless Steel Hood Catch Set. These catches are engineered as a direct bolt-on upgrade, mounting to factory locations using your vehicle's existing hardware for a straightforward installation. Each set is manufactured from prime 304 stainless steel, specifically chosen for its superior corrosion resistance and durability in harsh off-road environments. The material is polished to a mirror-like finish to provide a lasting, high-luster appearance that resists the elements.

• Fits 2007 to 2018 Jeep Wrangler JK and JK Unlimited
• Constructed from premium 304-grade stainless steel
• Mirror-polished finish for maximum corrosion resistance
• Direct-fit replacement using existing factory hardware
• Weather-resistant design for long-term outdoor exposure
• Sold as a complete pair (left and right sides)
• Manufacturer Part Number: 11116.06
• Limited 5-year manufacturer warranty

Fits 1997-2006 Jeep Wrangler TJ models, including Sport, Sahara, Rubicon, SE, and Unlimited.

Replace your weathered or vibrating factory latches with the Rugged Ridge Polished 304 Stainless Steel Hood Catch Set. Over time, original equipment rubber and plastic catches can degrade, leading to hood flutter and a worn appearance. This set provides a durable, corrosion-resistant solution that maintains hood security regardless of terrain or weather conditions.

Constructed from premium polished 304-grade stainless steel, these catches are built to withstand the elements and resist rust. The direct bolt-on design allows for a straightforward installation using basic hand tools, mounting directly to the factory hinge locations. This kit comes complete with a pair of catches and all necessary mounting hardware for a full replacement.

• Replaces manufacturer part number: 11116.02
• Material: Polished 304 Stainless Steel
• Fitment: Direct OE replacement
• Installation: Bolt-on with existing hardware points
• Kit includes: Two (2) hood catches and mounting hardware
• Warranty: Limited 5 Year Warranty

Fits all 2020-2025 Jeep Gladiator JT models.

When lifting a Jeep Gladiator, the increased suspension height alters the driveline geometry, often resulting in steep angles at the carrier bearing that can cause vibration and premature wear. The RockJock rear driveshaft carrier bearing spacer is a precision-engineered solution designed to restore proper driveline alignment. By lowering the carrier bearing relative to the frame, this spacer reduces the working angles of the U-joints to maintain smooth operation in lifted applications.

• CNC-machined from high-grade billet aluminum for maximum durability and corrosion resistance.
• Corrects driveline geometry to minimize vibrations in vehicles with suspension lifts.
• Installs directly between the factory carrier bearing and the frame mounting points.
• Complete kit includes necessary longer mounting hardware for a straightforward bolt-on installation.
• Manufacturer Part Number: RJ-151402-101

Fits select 1962-2026 Jeep Wrangler and Gladiator models.

The RockJock Front Brake Line Relocation Bracket Kit is an essential upgrade for vehicles equipped with suspension lifts or increased travel. These brackets allow you to safely reposition the factory front brake flex hoses, preventing them from being over-extended or snagged during suspension articulation. By moving the mounting point, you maintain proper hose slack without the need for custom brake lines.

Installation is efficient and uses existing mounting points. The factory brake hoses are unbolted from the vehicle and secured to the RockJock relocation brackets with the included hardware. These brackets then bolt directly onto the factory studs on the control arms using the original nuts. This heavy-duty kit ensures your braking system remains secure and functional in demanding off-road conditions.

• Relocates factory front flex hoses to accommodate increased suspension travel
• Bolts to original control arm mounting studs for a secure, factory-style fit
• Maintains brake system integrity without requiring hose replacement
• Includes two (2) relocation brackets, two (2) bolts, two (2) washers, and two (2) nyloc nuts
• Manufacturer Part Number: RJ-141300-101

Fits select 1984-2006 Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ, and Wrangler TJ/LJ models.

The RockJock heavy-duty steering stabilizer bracket is engineered specifically for 1-1/4 inch OD rods. This oversized bracket is a standard component in the RockJock CE-9701 Currectlync Steering System, but its robust design makes it an ideal choice for universal applications that utilize 1.25-inch diameter tie rods or drag links. This kit provides a secure, bolt-on mounting point for your stabilizer shock to ensure consistent damping and reduced steering feedback.

• Fits 1-1/4 inch (1.25") Outer Diameter steering rods
• Heavy-duty steel bracket plate for maximum durability
• Direct replacement component for Currectlync Steering Systems
• Includes two U-bolts with stover nuts for a vibration-resistant fit
• Includes shock mounting stud and all necessary installation hardware
• Manufacturer Part Number: CE-9701SB

The Ridetech Weld-On Rear Axle Bracket (MPN 70010122) is a critical component for properly securing a 4-link suspension system to your rear axle housing. While designed for use with Ridetech's bolt-on 4-link series, this weld-on variant provides a permanent, high-strength mounting solution that eliminates potential movement and ensures precise suspension geometry.

Constructed from heavy-duty steel, this bracket is engineered to withstand the significant lateral and vertical loads encountered in high-performance street and track applications. It serves as a necessary component for builders customizing their rear suspension setup or looking to add extra rigidity to their chassis connection.

• Manufacturer Part Number: 70010122
• Installation: Weld-on design for a permanent, secure attachment to the axle housing
• Compatibility: Engineered for use with Ridetech bolt-on 4-link systems
• Construction: Precision-fabricated steel for accurate fitment and long-term durability

Fits 2015-2025 Ford F-150 (King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, STX, Tremor, XL, and XLT).

The Ridetech Rear Leaf Spring Bracket Kit is engineered for enthusiasts using a Ridetech axle flip and shock setup on their 2015-2025 Ford F-150. This kit provides the necessary components to properly relocate and optimize your rear suspension geometry, ensuring the axle flip functions correctly without compromising structural integrity or alignment.

Constructed for durability and precision, this kit includes front leaf spring brackets and adjustable rear shackles, allowing for fine-tuning of the vehicle's stance and suspension response. All required high-strength hardware is included to replace the factory mounting points with a secure, performance-oriented solution.

• Specifically designed for use with Ridetech axle flip kits and performance shocks
• Includes front leaf spring brackets and adjustable rear shackles
• Maintains proper rear suspension geometry on lowered applications
• Includes all necessary installation hardware
• Manufacturer Part Number: 12299516

Fits 2015-2025 Ford F-150 2WD and 4WD models (including Raptor, Tremor, Lariat, and King Ranch).

Fine-tune your truck's stance and improve suspension geometry with these Ridetech adjustable rear shackles. Designed for a direct replacement of the factory hardware, these shackles provide an easy way to level the rear of your F-150 or achieve a mild drop. The adjustable mounting points allow for multiple height settings, giving you the flexibility to dial in the exact look and clearance your build requires.

• Precision Adjustment: Multiple mounting holes allow for fine-tuning the rear ride height.
• Heavy-Duty Construction: Built to handle the stresses of both street driving and off-road use.
• Direct Fit: Replaces factory rear leaf spring shackles using existing mounting points.
• Complete Compatibility: Engineered for both 2WD and 4WD 2015-2025 F-150 chassis.
• Manufacturer Part Number: 12299514

Fits select 2015-2025 Ford F-150 2WD and 4WD models, including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Tremor, STX, SSV, and Police Responder.

The Ridetech Onboard Scales Sensor Bracket Kit is designed for Ford F-150 owners who need to maintain the functionality of their factory-equipped payload and leveling sensors after suspension modifications. When changing the ride height of a vehicle equipped with Ford’s onboard scales, the factory sensor linkage geometry can be compromised. These precision-engineered brackets provide a secure mounting point that restores the sensor to its proper operating range, ensuring accurate data for the vehicle's onboard scale and headlight leveling systems.

• Maintains factory onboard scale and leveling sensor functionality
• Specifically designed for 2015-2025 Ford F-150 2WD and 4WD applications
• Durable construction to withstand road debris and harsh conditions
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 12299502

Fits 2015-2025 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Tremor, and STX.

The Ridetech Headlight Sensor Bracket Kit is an essential solution for late-model Ford F-150 owners who have modified their vehicle's ride height. On trucks equipped with auto-leveling or adaptive headlights, lifting or lowering the suspension can move the factory height sensors outside of their calibrated operational range. This kit provides the necessary relocation brackets to restore proper sensor geometry, ensuring your headlight beams remain correctly aimed and preventing system errors or warning lights.

• Restores factory headlight sensor geometry after suspension height changes
• Maintains proper auto-leveling headlight calibration and beam alignment
• Durable construction designed for the 2015-2025 Ford F-150 chassis
• Includes necessary hardware for sensor relocation
• Manufacturer Part Number: 12299501

Fits select 1964-1974 Buick, Chevrolet, GMC, Oldsmobile, and Pontiac models equipped with Ridetech AFX C7 hub spindles.

These Ridetech caliper brackets allow you to adapt C5 or C6 Corvette brake calipers to your vehicle when using AFX C7 hub spindles. Precision-engineered to ensure proper alignment and spacing, these brackets are essential for builders looking to upgrade their stopping power using widely available Corvette brake components. The high-strength construction handles the increased torque loads of performance braking systems.

• Specifically designed for Ridetech AFX C7 hub spindles
• Compatible with C5 and C6 Corvette brake calipers
• Includes a pair of brackets (left and right)
• Includes all necessary mounting hardware
• Manufacturer Part Number: 11009546

The Rhino-Rack Pioneer Worklight Bracket (43234) provides a secure, heavy-duty mounting solution for auxiliary lighting on any Pioneer Platform, Tradie Tray, or Tray system. Engineered for professional-grade durability, this bracket allows you to mount work lights, spotlights, or scene lights to increase visibility during night recoveries, site work, or setup at camp.

• Fits all Rhino-Rack Pioneer Systems (Platforms, Tradie Trays, and Trays).
• Manufactured from corrosion-resistant, powder-coated steel for long-term weather protection.
• Versatile mounting design attaches to all sides of the Pioneer system.
• Adjustable height settings allow for precise light positioning based on your specific clearance needs.
• Simple bolt-on installation ensures a rigid, vibration-resistant mount.
• Manufacturer Part Number: 43234.

The Rhino-Rack Pioneer SL Light Bracket Kit (43202) is a specialized mounting solution designed to integrate auxiliary lighting into your Rhino-Rack Pioneer Platform, Tradie Tray, or Tray. These brackets provide a stable, low-profile attachment point for small work lights and spot lights, ensuring your perimeter or site lighting is positioned exactly where you need it.

• Specifically designed for compatibility with the Rhino-Rack Pioneer System range
• Optimized for small-form-factor work lights and spot lights
• Installs directly into the integrated C-channels for a clean, secure fit
• Low-profile design helps maintain vehicle clearance and aerodynamics
• Includes all necessary mounting hardware for a complete installation
• Manufacturer Part Number: 43202