Fits select 1978-1988 GM G-Body vehicles, including Buick Regal, Chevrolet Malibu, Chevrolet Monte Carlo, Oldsmobile Cutlass, and Pontiac Grand Prix/LeMans.

UMI Performance trailing arm mount braces are engineered to reinforce the high-stress rear upper and lower front control arm mounts on your GM G-Body. As horsepower and torque increase, factory mounts are prone to bending or catastrophic failure. These tubular reinforcements tie the upper and lower mounts together, distributing loads across the frame for significantly improved structural integrity and predictable handling under load.

Unlike many aftermarket alternatives, UMI braces are precision-bent to follow the floor's contour, ensuring a perfect fit without requiring the floor pan to be clearanced or dented. These reinforcements are manufactured from high-strength DOM steel and are TIG welded for maximum durability. The 100% bolt-on design features adjustability to account for production tolerances in factory frames.

• Replaces or reinforces weak factory rear control arm mounts
• Manufactured from heavy-duty DOM steel tubing
• Precision TIG-welded construction
• Contoured design maintains floor pan integrity
• Includes new longer Grade 8 bolts, lock nuts, and washers
• Direct bolt-in installation with no welding required
• Manufacturer Part Number: 3028-R

Fits 1978-1988 GM G-Body vehicles, including Buick Regal, Chevrolet Malibu, Chevrolet Monte Carlo, Oldsmobile Cutlass, and Pontiac Grand Prix or LeMans.

UMI Performance trailing arm mount braces are engineered to reinforce the critical junction between the rear upper and lower front control arm mounts. High-horsepower applications and aggressive launches put significant stress on these factory points, often leading to bent or broken mounts. These tubular reinforcements tie the mounting points together, distributing loads more effectively to ensure chassis integrity and improved handling consistency.

Constructed from high-strength DOM steel and precision TIG welded, these braces feature a unique contoured design that follows the vehicle floor pan. Unlike inferior designs that require clearancing or denting the floor for installation, UMI’s reinforcements offer a perfect fit with built-in adjustment. The kit is a 100% bolt-in solution, including all necessary hardware for a straightforward garage installation.

• Manufactured from heavy-duty DOM steel tubing
• Precision TIG-welded construction for maximum durability
• Contours to the vehicle floor without modification or hammering
• Reinforces upper and lower rear control arm mounts
• Includes Grade 8 bolts, lock nuts, and washers
• Durable black powder-coated finish
• Manufacturer Part Number: 3028-B

Fits 2009-2017 Nissan 370Z (All Trims).

The Torque Solution Exhaust Mount Kit (TS-EH-370Z) is designed to stabilize your exhaust system by replacing the soft factory rubber hangers. High-performance driving often leads to excessive exhaust sway, which can result in rattles, contact with the chassis, or misalignment of the exhaust tips. This heavy-duty kit secures your exhaust in place, ensuring it remains properly positioned even under high-load conditions.

• Reduces exhaust movement and prevents swaying
• Eliminates rattles and contact with the vehicle chassis
• Direct replacement for OEM rubber exhaust hangers
• Ideal for aftermarket exhaust systems and track-driven vehicles
• Manufacturer Part Number: TS-EH-370Z

Vehicle Fitment

Fits 2003-2009 Nissan 350Z models including Base, Enthusiast, Grand Touring, Nismo, Performance, Touring, and Track.

Replace your soft, worn-out factory rubber hangers with the Torque Solution Exhaust Mount Kit. These high-durometer polyurethane mounts are designed to significantly reduce exhaust movement and vibration. This is a critical upgrade for vehicles equipped with heavy aftermarket exhaust systems or larger-diameter piping, as it prevents the exhaust from swaying and contacting the chassis or bumper cutouts.

• Direct replacement for factory exhaust hangers
• Constructed from high-grade polyurethane
• Eliminates exhaust movement and sway
• Engineered for street and track applications
• Manufacturer Part Number: TS-EH-350Z

Fits select 1997-2010 Ford Expedition, F-150, F-250, F-250 Super Duty, and Lincoln Navigator.

The Lund 300026 EZ Running Board Mounting Bracket Kit provides a solid, secure foundation for your side steps. Engineered with a body-mount design preferred by factory installers, these brackets utilize heavy-duty U-channel steel construction to ensure long-term stability and weight support. This specific kit features a Brite finish and is recommended for running boards equipped with a backlip.

Designed for a custom fit, these brackets streamline the installation process. While many applications require no drilling, they bolt directly to existing factory mounting points to maintain structural integrity and simplify the job in your driveway. Please note that running boards are sold separately.

• Manufacturer Part Number: 300026
• Material: Heavy-duty solid U-channel steel
• Finish: Brite
• Mounting Style: Installer-preferred body mount designs
• Installation: Custom fit; no-drill on select applications
• Compatibility: Designed for running boards with backlip
• Warranty: Limited Lifetime Warranty

Fits 2021-2025 Ford Bronco models (including Badlands, Big Bend, Black Diamond, Heritage, Outer Banks, Wildtrak, and Raptor).

Optimize your wheel-well clearance and eliminate tire rub with the JKS Manufacturing Max Tire Clearance Kit. Designed specifically for the 2021-2025 Ford Bronco, this kit replaces the factory body mount brackets with high-strength, low-profile alternatives. This modification allows for the installation of larger tires on both stock height and lifted vehicles while maintaining compatibility with factory and aftermarket "stubby" or mid-width bumpers.

• Heavy-duty 3/16" steel construction for maximum durability and support.
• Provides full clearance through wheel travel for 37x12.50 tires on Broncos with 2-4" of lift.
• Optimized for 17x9 to 20x9 wheels with 4.5"-5.5" backspacing.
• Allows for larger tire fitment at all ride heights; maximum tire size is dependent on specific lift height.
• High-clearance design provides a clean look when paired with aftermarket bumpers.
• MPN: JKS8300

Whether you are running a stock suspension or a lifted setup, this kit provides the necessary room for aggressive off-road rubber while retaining the structural integrity of the body mount system.

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited models.

Restore factory-level handling and suspension geometry on your lifted Jeep Wrangler JK with JKS Manufacturing Front Control Arm Correction Brackets. These brackets are engineered for vehicles with 2 to 4.5 inches of lift to flatten the control arm operating angles. By lowering the frame-side mounting points, these brackets correct caster and significantly improve anti-dive characteristics during hard braking, providing a more stable and controlled driving experience on and off the road.

• Designed for 2007-2018 Jeep Wrangler JK with 2-inch to 4.5-inch lift kits
• Constructed from heavy-duty, 1-piece fully boxed 7GA steel for superior strength
• Features a fully gusseted design for maximum durability under off-road stress
• Dual mounting hole positions allow for precise geometry correction based on lift height
• Improves front driveshaft CV joint operating angles to extend component life
• Easy installation inside factory control arm mounts using OE hardware
• Compatible with factory arms or JKS adjustable control arms
• Manufacturer Part Number: JKS6200

Fits select 2018-2025 Jeep Wrangler and Wrangler Unlimited (4xe, Rubicon, Sahara, Sport, and Willys).

Go Rhino Dominator Xtreme mounting brackets are engineered to provide a rock-solid foundation for your side steps. These vehicle-specific brackets are constructed from heavy-duty steel to ensure maximum stability and durability. Designed for a direct bolt-on application, they utilize factory mounting points for an easy, no-drill installation on your Jeep Wrangler JL.

• Precision vehicle-specific design ensures a secure fitment
• Heavy-duty steel construction for superior structural integrity
• Textured black powder coat finish provides long-lasting corrosion resistance
• Easy bolt-on installation with no drilling required
• Specifically for use with Go Rhino Dominator Xtreme series side steps
• Manufacturer Part Number: D64506BTK

Warranty Information: These brackets include a limited lifetime warranty on materials and construction, plus a 5-year warranty on the textured black finish.

Fits 2019-2026 Ram 1500 (Big Horn, Laramie, Limited, Rebel, TRX, and Tradesman).

Go Rhino Dominator Xtreme mounting brackets provide a vehicle-specific, rock-solid foundation for Dominator Xtreme Side Steps. Engineered to bolt directly to the factory mounting points on your Ram 1500, these brackets ensure a precise fit and maximum stability without the need for drilling on most applications. Each bracket set is manufactured from heavy-duty steel to withstand the rigors of daily use and off-road environments.

• Construction: Heavy-duty steel for maximum durability
• Finish: Textured black powder coat for superior corrosion resistance
• Installation: Bolt-on application using factory mounting points; no drilling required
• Warranty: Limited lifetime warranty on materials and construction; 5-year warranty on finish
• Manufacturer Part Number: D64306TK

Fits 2007-2021 Toyota Tundra models including Base, SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

Go Rhino mounting brackets provide a stable, vehicle-specific foundation for V-Series V3, RB10 Slim, and RB20 Slim running boards. Constructed from heavy-duty steel, these brackets are engineered to handle the rigors of daily use while maintaining a low-profile aesthetic. The textured black powder coat finish provides excellent corrosion resistance and matches the finish of Go Rhino side steps.

Installation is straightforward, utilizing factory mounting points on the Toyota Tundra frame for a true bolt-on application that requires no drilling on most vehicles. This kit includes the necessary brackets and hardware to provide a secure mounting point for your side steps.

• Specifically designed for V-Series V3, RB10 Slim, and RB20 Slim running boards
• Heavy-duty steel construction for maximum rigidity and weight support
• Easy bolt-on installation using factory mounting points
• Durable textured black powder coat finish
• Includes all necessary mounting brackets
• Manufacturer Part Number: 6944156
• 5-year limited warranty

Fits 2015-2026 Chevrolet Colorado and GMC Canyon (All Trims).

Go Rhino mounting brackets provide a stable, vehicle-specific foundation for V-Series V3, RB10 Slim, and RB20 Slim running boards. Engineered to bolt directly to the factory mounting points, these brackets ensure a rigid stepping surface and a secure installation without the need for drilling on most applications. Every bracket set is constructed from heavy-duty steel and finished in a durable textured black powder coat for long-term corrosion resistance.

• Compatible with Go Rhino V3, RB10 Slim, and RB20 Slim series side steps
• Precision-engineered for 2015-2026 Chevrolet Colorado and GMC Canyon
• Heavy-duty steel construction ensures maximum durability and weight support
• Easy bolt-on installation utilizes OE mounting locations
• Textured black finish protects against the elements
• Includes all necessary mounting hardware
• Manufacturer Part Number: 6942356
• Back by a 5-year warranty

The Fuelab 14502 Bracket and Hardware Kit provides a secure, professional mounting solution for 515xx and 525xx series fuel pressure regulators. Engineered for a precise fit, this kit ensures your regulator remains stable and properly positioned, even in high-vibration environments.

• Direct fit for Fuelab 515xx and 525xx series fuel pressure regulators
• Includes heavy-duty mounting bracket and necessary installation hardware
• Designed for long-term durability and corrosion resistance
• Facilitates a clean, stable installation in the engine bay
• Manufacturer Part Number: 14502

Fits select 1980-2026 Chevrolet, GMC, and Dodge trucks including C/K series, Colorado, Canyon, and Ram models (5.9L).

The BackRack 92001 Tonneau Cover Adaptor (TCA) Kit is a precision-engineered solution for truck owners who need to run both a cab guard and a bed cover. Because standard BackRack Cab Guards mount directly over the front stake pockets, they can interfere with tonneau covers that occupy the same space. This kit provides a 2-inch vertical lift to your Cab Guard, allowing it to clear inside-rail clamping tonneau covers while maintaining structural integrity.

• Elevates BackRack or Safety Rack Cab Guard by 2 inches for superior clearance.
• Designed specifically for tonneau covers that clamp to the inside of the truck bed rail.
• Includes a pair of extended Stake Pocket Bolts (SPBs) to replace original hardware and accommodate the increased height.
• Compatible with factory mounting points for a secure, bolt-on installation.
• Ensures full functionality of the tonneau cover without removing the cab rack.
• Manufacturer Part Number: 92001.

Mounting your high lifting jack to the top of your roof rack is simplified with the Rhino-Rack Pioneer High Lifting Jack Holder Bracket Set (43219). Designed to integrate seamlessly with all sizes of the Pioneer System, this bracket provides a secure and stable mounting solution for essential off-road recovery gear.

Constructed from heavy-duty, powder-coated steel, these brackets are engineered to withstand harsh trail conditions and provide long-lasting corrosion resistance. The top-mount orientation ensures your jack remains easily accessible while maximizing usable space on your Pioneer Platform or Tray for other equipment.

• Compatible with all Rhino-Rack Pioneer System sizes
• Heavy-duty powder-coated steel construction for maximum durability
• Corrosion-resistant finish for reliable performance in outdoor environments
• Top-mount design for quick access to recovery equipment
• Complete bracket set for a secure installation
• Manufacturer Part Number: 43219

The Rhino-Rack Pioneer LED Light Bracket (43173) provides a stable, professional mounting solution for auxiliary lighting on Pioneer roof systems. Specifically engineered for the Pioneer range, this bracket allows you to secure LED light bars or spotlights to improve visibility on the trail or at the job site.

Built from heavy-duty powder-coated steel, these brackets are designed to resist corrosion and endure the rigors of off-road environments. Mounting versatility is a key feature: for Pioneer Platform and Tradie models, brackets can be installed on the front, rear, or sides of the vehicle. For the Pioneer Tray, mounting is optimized for the sides and rear.

• Fits Rhino-Rack Pioneer Platform, Pioneer Tradie, and Pioneer Tray
• Constructed from durable, corrosion-resistant powder-coated steel
• Flexible mounting locations for customized lighting setups
• Simple installation to existing Pioneer accessory channels
• Manufacturer Part Number: 43173

Fits 2017-2022 Ford F-250 and F-350 Super Duty 4x4.

These Carli Upper Frame Brackets (CS-FLTB-23-UPR) provide a secure, heavy-duty mounting foundation for long-travel airbag systems on the Ford Super Duty platform. Designed to handle the increased articulation of modified suspension systems, these brackets ensure the air springs remain properly aligned throughout the full range of travel. This prevents binding and ensures consistent load support during heavy towing or hauling.

• Precision-engineered for Carli Long Travel Airbag kits
• Heavy-gauge steel construction for superior durability under stress
• Includes all necessary Grade 8 installation hardware
• Specifically designed for 4x4 Ford F-250 and F-350 frames
• Manufacturer Part Number: CS-FLTB-23-UPR

Fits 2024-2025 Ford Ranger Raptor.

Maintain your vehicle's factory safety features when upgrading to high-clearance aftermarket front bumpers. The Addictive Desert Designs Adaptive Cruise Control (ACC) Relocation Kit is engineered to reposition the factory radar sensor behind the grille, ensuring your system remains functional and calibrated after bumper modifications.

Designed for durability and precision, the relocation bracket is fully adjustable to allow for the fine-tuning of the sensor's angle, which is critical for accurate radar performance. The assembly is finished in a rugged 2-stage hammer black powder coat for superior corrosion resistance and a clean, integrated appearance. Proudly made in the USA, this kit provides a secure mounting solution that clears the way for more aggressive front-end protection.

• Function: Retains Adaptive Cruise Control (ACC) features with aftermarket bumpers
• Adjustability: Fine-tunable bracket for precise sensor alignment
• Mounting: Installs securely behind the factory front grille
• Finish: 2-stage hammer black powder coat
• Construction: Made in the USA
• Manufacturer Part Number: AC7205101NA

Fits select 2008-2023 Ford F-250 and F-350 Super Duty trucks.

When leveling a later model Super Duty, the factory track bar geometry often pulls the front axle off-center, which can lead to spring-to-frame interference and compromised steering feel. The Zone Offroad front track bar bracket is engineered to correct this on trucks equipped with 1-3" of lift. This heavy-duty bracket recenters the axle while ensuring the track bar operating angle remains in phase with the steering linkage for optimal handling and geometry.

Constructed from 1/4" high-strength steel, this fully welded bracket is built to handle the rigors of heavy-duty use. It features a cam slot and offset cam locks for precise axle centering and is designed as a direct bolt-in replacement for the factory bracket. This component is an essential upgrade for leveled F-250/F-350 trucks and is compatible with most leveling kits currently available.

• Material: High-strength 1/4" steel, fully welded
• Adjustment: Integrated cam slot with offset cam locks to recenter front axle
• Installation: Direct bolt-in design replaces factory bracket
• Compatibility: Engineered for 1" to 3" lift heights
• Application: Eliminates spring-to-frame interference and restores steering geometry
• Manufacturer Part Number: ZONF5252

The ARB 6177349 Bumper Mounting Kit is a vehicle-specific hardware solution required to securely attach the ARB 3424050 bumper to the vehicle chassis. This fitting kit is engineered to provide a precise interface between the bumper and the frame, ensuring structural integrity and proper alignment during installation.

Designed with safety as a priority, this mounting system is specifically developed to maintain the performance of the vehicle's factory safety systems. By utilizing dedicated mounting points and high-strength components, the 6177349 kit allows the bumper to function as intended without compromising the vehicle's engineered impact zones.

• Manufacturer Part Number: 6177349
• Required Compatibility: Designed specifically for ARB Bumper part number 3424050
• Contents: Includes all necessary brackets and high-grade hardware for chassis mounting
• Design: Vehicle-specific geometry for a bolt-on fit and safety system compatibility
• Construction: Heavy-duty materials built to withstand the stresses of off-road use and winch recovery

Fits 1964-1972 GM A-Body vehicles, including Buick Skylark/Special, Chevrolet Chevelle/El Camino, Oldsmobile 442/Cutlass, and Pontiac GTO/LeMans/Tempest.

Designed to reinforce the factory upper and lower rear trailing arm mounts, these UMI Performance frame braces are essential for high-horsepower or heavy-use classic A-Bodies. Increased torque can stress, bend, or even snap factory mounts; these tubular reinforcements tie the upper and lower control arm mounting points together to distribute loads and provide a more rigid rear suspension geometry.

Each brace is manufactured from heavy-duty DOM steel tubing and precision TIG welded for maximum strength. The adjustable design ensures a perfect fit even on chassis with production tolerances or age-related shift. Installation is straightforward using the included high-strength fasteners.

• Fabricated from high-quality DOM steel tubing
• Precision TIG welded for superior joint integrity
• Adjustable design for precise chassis fitment
• Includes new longer Grade 8 hardware, nuts, and washers
• Directly ties upper and lower rear control arm mounts
• Manufacturer Part Number: 4029-B

Fits select 1964-1972 Buick, Chevrolet, Oldsmobile, and Pontiac A-Body models, including Chevelle, GTO, Cutlass, Skylark, and El Camino.

Decades of exposure to moisture and road debris often lead to severe corrosion around the factory body mounts on GM A-Body frames. This corrosion can prevent the body from being properly secured and aligned. The UMI Performance 4055 body mount frame repair kit is a 14-piece solution designed to restore structural integrity and provide a precisely sized hole for new mount installation. These components are laser-cut from 1/8-inch steel to ensure a perfect fit and long-lasting repair.

• Restores frame surface to like-new condition for accurate body mounting
• 14-piece kit provides comprehensive coverage for frame mount locations
• Manufactured from 1/8-inch thick laser-cut steel for durability
• Supplied in bare metal finish to ensure optimal weld penetration
• Proudly designed and manufactured in Philipsburg, PA-USA
• Manufacturer Part Number: 4055

Note: This is a weld-in repair kit. Installation requires cutting out the damaged factory material and welding these replacement plates into position.

Fits 1964-1972 GM A-Body vehicles including Chevrolet Chevelle and El Camino, Pontiac GTO and LeMans, Oldsmobile 442 and Cutlass, and Buick Skylark and Special.

Reinforce your classic GM A-Body chassis with UMI Performance trailing arm mount braces. As power levels increase, factory rear control arm mounts become a weak point, prone to bending or breaking under heavy torque loads. These tubular reinforcements tie the upper and lower control arm mounts together, significantly increasing structural rigidity and improving driving performance.

UMI Performance braces are manufactured from high-strength DOM steel and precision TIG welded for maximum durability. Unlike many competing designs, these braces are specifically bent to contour to the vehicle's floor pan, ensuring a correct fitment without requiring you to dent or modify the floor. Each kit (MPN 4028-B) is adjustable for a perfect fit and includes all necessary heavy-duty hardware.

• Fabricated from heavy-duty DOM steel tubing
• Precision TIG welded for superior strength
• Contoured design clears floor pan without modifications
• Adjustable for a perfect fit on all 1964-1972 A-Body chassis
• Includes new longer Grade 8 hardware, nuts, and washers
• Manufacturer Part Number: 4028-B

Fits 1978-1988 GM G-Body models including Buick Regal, Chevrolet El Camino, Malibu, and Monte Carlo, Oldsmobile Cutlass, and Pontiac Bonneville and Grand Prix.

The UMI Performance 3053-R three-point front frame brace is engineered to significantly stiffen the front frame horns and front crossmember area of the GM G-Body platform. By tying these critical points together, this brace reduces chassis flex and improves steering response and handling predictability. It serves as a high-performance replacement for the OE reinforcements and the common "Grand Prix Bar," providing a more rigid three-point connection.

Designed for versatile use in street, strip, autocross, or road racing, this brace maintains a lightweight profile without sacrificing structural integrity. The bolt-in design utilizes factory mounting points for a straightforward installation that requires no drilling.

• Direct Bolt-In: Installs using existing factory points with no drilling required.
• Three-Point Design: Stiffens the front frame horns and crossmember for reduced chassis deflection.
• High-Strength Hardware: Includes a full set of Grade 8 mounting hardware.
• Lightweight Construction: Weighs less than 10 lbs to preserve front-end balance.
• Durable Finish: Protected by a tough red powder coat for maximum corrosion resistance.
• Made in the USA: Designed and manufactured in Philipsburg, PA.
• Manufacturer Part Number: 3053-R

Fits 2021-2024 Ford Bronco.

Maintaining a clear view of your surroundings is critical when navigating tight trails or reversing into parking spots. The Turn Offroad Camera Relocation Kit is designed to solve visibility issues encountered when upgrading to larger spare tires on the 6th Gen Bronco. This kit repositions the factory camera to ensure your imaging system remains functional and unobstructed by oversized wheel and tire assemblies.

• Restores camera line-of-sight often blocked by aftermarket spare tires
• Retains use of the factory Ford camera for OE-level integration
• Precision-engineered for a direct fit on the 2021-2024 Ford Bronco platform
• Durable construction designed to withstand off-road vibration and debris
• Manufacturer Part Number: FB1-CR1

Fits 2021-2024 Ford Bronco.

The Turn Offroad EA6-M1 License Plate Relocation Bracket provides a clean solution for 6th Generation Bronco owners who have upgraded to aftermarket front bumpers or winches that obscure the factory mounting location. This bracket moves the plate to a more suitable position, ensuring you remain street-legal without blocking critical airflow to the radiator or intercooler.

• Specifically engineered for 2021+ Ford Bronco mounting points
• Relocates the license plate to accommodate winches and high-clearance bumpers
• Maintains legal plate visibility while protecting against trail vibration
• Simple bolt-on installation with no permanent vehicle modifications required
• Manufacturer Part Number: EA6-M1

Fits all 2012-2015 Honda Civic models, including DX, EX, EX-L, GX, HF, Hybrid, LX, Natural Gas, SE, and Si.

The Torque Solution Oval Exhaust Mount (TS-EH-304) is designed to replace soft, worn factory rubber hangers to provide a more stable and secure exhaust system. By upgrading to these high-strength mounts, you significantly reduce exhaust movement and prevent the system from rattling or coming into contact with the chassis under heavy vibration or aggressive driving conditions.

• Direct replacement for factory exhaust hangers
• Reduces exhaust system sway and movement
• Durable construction for longevity and performance
• Oval design specific to 9th Generation Honda Civic fitment
• Manufacturer Part Number: TS-EH-304

Fits select 1946-1995 Jeep Willys, CJ-2, CJ-3, CJ-5, CJ-6, CJ-7, Scrambler, and Wrangler.

Restore the look and function of your front end with the Rugged Ridge 304 Stainless Steel Hood Catch Kit. These catches are a direct-fit replacement for weathered or rusted factory latches, offering an OE-style design with significantly upgraded corrosion resistance. Manufactured from prime 304-grade stainless steel and polished to a mirror finish, this kit is built to withstand the elements without pitting or rusting over time.

• Prime 304 stainless steel construction for maximum rust protection
• Polished mirror finish provides a premium custom accent
• Complete set includes both hood catches and all necessary stainless steel mounting hardware
• Direct OE-style replacement requires no drilling on most applications
• Manufacturer Part Number: 11116.01
• Limited 5-Year Warranty

Fits 2008-2026 Subaru WRX, STI, and Impreza, and 2013-2026 Subaru BRZ and Toyota GR86.

The PERRIN Performance Long Length Exhaust Hanger Kit (PSP-EXT-711) is an essential upgrade for enthusiasts running aftermarket exhaust systems that require extra clearance from the rear bumper or chassis. By extending the distance between the mounting point and the exhaust rod, these hangers lower the exhaust piping to prevent heat damage to bodywork or interference with oversized mufflers. Constructed from high-durometer polyurethane, these hangers are significantly stiffer than the soft OEM rubber versions, effectively eliminating exhaust swing and rattle during high-load driving.

• Extended length provides additional clearance for custom or aftermarket exhaust setups
• Stiff polyurethane construction reduces exhaust movement and vibration
• Direct replacement for factory rubber hangers
• Includes 5 long-length hangers
• Manufacturer Part Number: PSP-EXT-711

The Torque Solution Billet MAC Valve Mount Bracket offers a professional, secure solution for mounting your electronic boost control solenoid. Designed to replace makeshift mounting methods like zip ties, this bracket provides a stable, vibration-resistant platform that keeps your solenoid safely positioned within the engine bay.

Precision CNC machined from high-quality billet aluminum, this mount is engineered for a perfect fit with standard 3-port and 4-port MAC solenoid valves. Its compact footprint allows for versatile installation in tight spaces, ensuring your vacuum lines and wiring remain organized and protected from heat or moving components.

• CNC machined billet aluminum construction
• Compatible with 3-port and 4-port MAC solenoid valves
• Universal mounting design for custom installations
• Improves engine bay aesthetics and component security
• Manufacturer Part Number: TS-UNI-646