Fits select 2008-2010 Ford F-250 and F-350 Super Duty models (6.4L).

The BD Diesel FleX-Plate (MPN 1041240) is a direct bolt-in upgrade for the Ford 5R110 transmission, engineered to withstand the rigors of towing, racing, and daily driving. CNC machined from quench and tempered 100ksi steel, these units are 1.5 times thicker than the factory flex-plate to prevent common cracking issues under high torque loads. Unlike zinc-plated alternatives, BD uses a black oxide coating to prevent hydrogen embrittlement, ensuring long-term structural integrity.

Each FleX-Plate features a one-piece billet design with an integrated counterweight, balanced in-house to exceed original equipment specifications. The heat-treated ring gear provides superior durability for high-mileage use. This unit is compatible with all OEM and aftermarket torque converters, making it a reliable choice for transmission or converter swaps.

• Yield strength of 100,000 psi for maximum durability
• 1.5 times thicker than the stock factory unit
• Black oxide finish resists corrosion and hydrogen embrittlement
• Precision balanced to OE specifications
• Heat-treated ring gear for extended lifespan
• Manufacturer Part Number: 1041240
• 36-Month / 150,000-Mile Limited Warranty

This Part Fits:

Fits select 2007-2018 Dodge and Ram 2500/3500 trucks (5.9L / 6.7L Cummins).

The extreme torque produced by modified 5.9L and 6.7L Cummins engines often exceeds the structural limits of the factory flex plate, leading to cracking or catastrophic failure. The BD Diesel FleX-Plate (MPN 1041221) is a heavy-duty, direct bolt-in replacement engineered to withstand these loads. Constructed from forged billet steel with twice the material thickness of an OE unit, this flex plate is precision-balanced and SFI 29.3 approved for use in high-performance and racing environments.

To ensure long-term durability, each unit is finished with a Black Oxide coating. This specialized finish provides superior corrosion resistance while preventing the hydrogen embrittlement often associated with standard zinc plating. Designed for versatility, it is compatible with all OEM and aftermarket torque converters, making it an essential upgrade during a transmission or converter swap.

• Rated for 2,000 lb-ft of torque (up to 3,500 lb-ft with BD Slip Eliminator shim kit)
• Forged billet steel construction for maximum rigidity
• SFI 29.3 certified for competition use
• Black Oxide finish resists corrosion and cracking
• Allows for axial thrust unlike solid flywheel conversions
• 36-Month / 150,000-Mile Limited Warranty
• Manufacturer Part Number: 1041221

Fits select 1994-2007 Dodge Ram 2500 and 3500 (5.9L / 6.7L).

The extreme torque output of modified Cummins engines can easily crack or shatter a stock flex plate. The BD Diesel FleX-Plate is engineered specifically for high-performance applications, providing a robust solution that handles up to 1,500 lb-ft of torque out of the box (and up to 3,500 lb-ft with the addition of friction shims). Constructed from forged billet steel at twice the thickness of the factory unit, this flex plate is precision-balanced and SFI 29.3 certified for racing safety. Unlike solid flywheel conversions, this design allows for necessary axial thrust, protecting your drivetrain components.

The 1041210 FleX-Plate features a specialized black oxide coating to prevent corrosion and eliminate hydrogen embrittlement—a common failure point in zinc-plated alternatives. This is a direct bolt-in replacement compatible with both OEM and most aftermarket torque converters.

• Manufacturer Part Number: 1041210
• SFI 29.3 certified for high-horsepower diesel competition
• Forged billet steel construction, twice as thick as stock
• Rated for 1,500 lb-ft torque capacity
• Black oxide finish resists corrosion and cracking
• Precision-balanced for smooth operation
• Direct bolt-in fitment for factory or aftermarket converters
• Includes 36-month / 150,000-mile limited warranty

Fits 1994-2002 Dodge Ram 2500 and 3500 Base models.

The BD Diesel Elbow Orifice (MPN 1040310) is a targeted mechanical upgrade for Cummins-powered Dodge Ram trucks equipped with the Holset HX35 turbocharger. By modifying the wastegate signal, this orifice allows for increased boost levels, helping you maximize the performance of your forced induction system without complex modifications. This unit is pre-set at the factory for optimal performance, eliminating the need for manual adjustment during installation.

• Engineered for HX35: Specifically designed to work with factory HX35 turbochargers found on 1994-2002 Dodge Ram pickups.
• Factory Pre-Set: No calibration required; the orifice is ready to install out of the box.
• Straightforward Installation: Replaces the factory fitting to provide immediate boost control benefits.
• Recommended Support: BD Diesel suggests installing a high-performance air filter alongside this part to accommodate the increased airflow.

Manufacturer Part Number: 1040310

Fits 1994-1998 Dodge Ram 2500 and 3500 Base models equipped with the 12-valve Cummins engine and Bosch P7100 injection pump.

The BD Diesel 4000 RPM Governor Spring Kit (MPN: 1040185) is engineered to unlock the potential of your P7100-equipped Cummins. By increasing the governed engine speed to 4000 RPM, this kit significantly improves mid-to-high-end throttle response and enables higher horsepower levels. This upgrade reduces the need for frequent gear shifting during heavy towing or racing applications, ensuring the engine stays in the power band longer.

This modification requires technical expertise. Due to the precision required for Bosch P7100 pump adjustments, installation must be performed by a qualified pump technician to prevent engine damage or poor performance. Note: If you have not already installed 60lb exhaust valve springs, they are required for safe operation at these engine speeds.

• Increases governor limit to 4000 RPM
• Enhances throttle response across the entire power band
• Includes intake valve springs
• Compatible with Bosch P7100 mechanical injection pumps
• Manufacturer Part Number: 1040185
• Warranty: 12-month or 12,000-mile limited warranty

Fits 1994-1998 Dodge Ram 2500 and 3500 Base (5.9L).

The "Killer Dowel Pin" (KDP) is a notorious vulnerability in the 5.9L 12-valve Cummins engine. Over time, the factory-installed steel dowel pin located behind the timing cover can work its way loose and drop directly into the timing gears. This event typically leads to a cracked gear housing or catastrophic internal engine failure. The BD Diesel KDP Repair Kit provides a definitive, permanent solution to secure this pin before it causes expensive downtime.

This kit utilizes a specialized retainer tab that bolts into the gear housing, physically locking the dowel pin in its bore to prevent it from backing out. It is a critical preventative maintenance item for any second-generation Dodge Ram owner looking to safeguard their engine's timing system.

• Engine Protection: Prevents the OEM dowel pin from dropping into the timing gear train.
• Mechanical Solution: Uses a heavy-duty retainer tab for a more permanent fix than the factory friction fit.
• Direct Replacement: Designed specifically for the 12-valve 5.9L timing cover configuration.
• Complete Hardware: Includes all necessary components to perform the repair.
• MPN: 1040182
• Warranty: 12-Month / 12,000-Mile manufacturer warranty.

Fits 2020-2026 Ford F-250 and F-350 Super Duty trucks (6.7L).

The BD Diesel Electronic Positive Air Shutdown (E-PAS) provides critical protection against diesel engine runaway, a rare but catastrophic event where external hydrocarbons are drawn into the intake. By controlling the electronic throttle body in the intake manifold, the E-PAS safely cuts the air supply to shut down the engine in emergency situations. This electronic system eliminates the need for bulky mechanical valves, significantly reducing installation complexity and potential leak points.

Designed for a seamless integration, this kit features factory plug-in connectors and a premade wiring harness, allowing for a complete installation in less than 1.5 hours. The unit automatically resets after a shutdown event and is programmed to prevent ECM trouble codes. Because it uses OE-style connections, the system can be easily removed for vehicle lease returns or service without leaving permanent modifications.

• Protects against catastrophic engine overspeed and runaway conditions
• Utilizes factory electronic intake air control valve for emergency shutdown
• Saves up to 3 hours of labor compared to mechanical shutdown systems
• Plug-and-play installation with factory-style connectors and wiring harness
• Automatic reset functionality after a shutdown event
• Transparent operation that does not trigger ECM trouble codes
• Manufacturer Part Number: 1036757
• Warranty: 25 Months or 24,000 Miles

Fits select 2008-2019 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD (6.6L).

The BD Diesel High Idle Control (MPN 1036627) provides precise, adjustable engine speed control for your Duramax diesel. This module is an essential upgrade for trucks equipped with remote starters or PTO-driven equipment, as well as those operating in cold climates where faster coolant warm-ups are required. By increasing the idle speed, you ensure the engine maintains optimal operating temperatures during extended idling periods.

This control module is engineered to bypass factory auto-engine-off functions, providing consistent performance for professional and utility applications. It offers five distinct RPM settings, allowing you to select the precise speed needed for your specific task or environmental conditions. Installation is straightforward, integrating with the vehicle's electronics to provide a reliable solution for idling management.

• Selectable RPM settings: 900, 1200, 1500, 1800, and 2100 RPM
• Reduces warm-up times and improves heater performance in cold weather
• Ideal for remote starters and PTO applications
• Bypasses factory automatic engine shut-off functions
• Manufacturer Part Number: 1036627
• Warranty: 12 Months or 24,000 Miles

The BD Diesel High Idle Kit (MPN 1036622) provides precise control over your engine's idle speed, making it an essential upgrade for diesel owners who utilize remote starters, Power Take-Off (PTO) equipment, or require extended idling. By increasing the idle RPM, this kit ensures faster engine warm-ups in cold climates, prevents cylinder washing, and maintains optimal battery charging under heavy electrical loads.

Fits select 2007-2025 Dodge, Ram, Chevrolet, GMC, and Cadillac models (5.9L / 6.7L / 3.0L / 6.6L).

• Adjustable RPM levels: 900, 1200, 1500, 1800, and 2100 RPM
• Bypasses automatic engine-off functions to prevent unwanted shutdowns during idling
• Promotes faster engine warm-up and maintains operating temperature
• Ideal for PTO applications and vehicles with remote starters
• Easy-to-install design with adjustable settings
• Manufacturer Part Number: 1036622
• Warranty: 12 Months or 24,000 Miles

Fits 2017-2022 Ford F-250 and F-350 Super Duty models.

The BD Diesel High Idle Control Kit (MPN 1036616) provides precise control over your engine's idling speed, making it an essential upgrade for fleet vehicles, work trucks, and cold-weather operation. This kit allows you to adjust engine speed between 800 and 2400 RPM, ensuring faster engine warm-ups and providing the necessary power for PTO (Power Take-Off) applications. By bypassing the factory Auto Engine Off functions, it maintains consistent operation during extended idling sessions.

Designed specifically for gasoline motors, this kit features a true plug-and-play installation that integrates seamlessly with your vehicle's electronics. Whether you are using a remote starter or need sustained high RPM for auxiliary equipment, this controller delivers reliable performance without the need for complex wiring modifications.

• Adjustable idle range from 800 to 2400 RPM
• Simple plug-and-play installation for gasoline engines
• Bypasses factory Auto Engine Off functionality
• Ideal for PTO applications and remote starters
• Promotes faster engine warm-up in cold climates
• Manufacturer Part Number: 1036616

Fits 2023-2026 Ford F-250 and F-350 Super Duty trucks.

The BD Diesel High Idle Control Kit (1036613) provides precise control over your Power Stroke engine speed during stationary operation. This kit is a vital solution for trucks requiring extended idling periods, such as those equipped with Power Take-Off (PTO) systems, remote starters, or vehicles operating in extreme cold where faster engine warm-ups are necessary. By maintaining a higher RPM, this controller also effectively bypasses the factory Auto Engine Off functions that can interrupt work cycles.

Engineered for a non-invasive installation, this kit utilizes factory-style connectors for a true plug-and-play setup that requires no wire splicing or cutting. The adjustable dial allows the operator to select an engine speed between 900 and 3000 RPM to suit the specific load or warming requirements of the vehicle.

• Adjustable idle range: 900-3000 RPM
• Plug-and-play installation with no wire splicing required
• Bypasses factory Auto Engine Off logic
• Supports faster engine warm-up in cold climates
• Ideal for PTO, remote start, and extended idling applications
• Manufacturer Part Number: 1036613

Fits 2017-2022 Ford F-250 and F-350 Super Duty models (6.7L). This BD Diesel High Idle Control kit allows for manual adjustment of engine RPM during extended idling periods, providing the necessary sustainment for PTO operations, remote starters, and faster engine warm-ups in cold climates.

Designed for professional-grade reliability and ease of use, this module bypasses the factory Auto Engine Off functions that can interrupt critical work tasks. The system is fully adjustable within a 900-3000 RPM range, giving you precise control over engine speed based on your specific application requirements. Installation is straightforward and non-invasive, plugging directly into the factory connector with no wire splicing required to preserve your vehicle's harness integrity.

• Adjustable Range: 900-3000 RPM
• Installation: Plug-and-play factory connector (No splicing)
• Applications: Ideal for PTO use, remote starters, and extended idling
• Function: Bypasses factory Auto Engine Off settings
• Manufacturer Part Number: 1036612
• Warranty: 12-Month / 24,000-Mile

Fits 2003-2016 Ford F-250/F-350 Super Duty and 2005 Ford Excursion (6.0L / 6.4L / 6.7L Power Stroke).

The BD Diesel High Idle Control (MPN: 1036610) provides precise manual control over your engine's idle speed, solving the issues associated with extended idling in cold climates or stationary work environments. By increasing the RPM, this module helps prevent "wet stacking," maintains optimal oil pressure, and ensures the alternator provides enough current for high-draw electronics. This is an essential upgrade for vehicles utilizing remote starters, Power Take-Off (PTO) equipment, or any application requiring faster engine warm-up times.

• Adjustable RPM Ranges: Supports 1200-2400 RPM on 2005-2010 models and 900-3000 RPM on 2011-2016 models.
• System Compatibility: Fully compatible with remote starters and PTO applications.
• Faster Warm-Ups: Accelerates engine and cabin heating to reduce wear during cold starts.
• Simple Integration: Designed for easy installation with adjustable settings to match your specific needs.
• Manufacturer Part Number: 1036610
• Warranty: 12-month or 24,000-mile limited warranty.

Fits 2003-2004 Ford F-250 and F-350 Super Duty (6.0L).

The BD Diesel High Idle Control (MPN: 1036609) is a essential upgrade for diesel owners who face cold weather starts or use their trucks for extended idling and Power Take-Off (PTO) applications. By maintaining a consistent 1200 RPM, this module helps your 6.0L Powerstroke reach operating temperature significantly faster than at base idle, reducing engine wear and preventing "wet-stacking" caused by incomplete combustion during cold idles.

Designed for straightforward installation, this control module is fully compatible with remote starters and PTO systems, ensuring your charging system stays active and your cabin warms up quickly before you hit the road.

• Preset 1200 RPM high idle speed
• Accelerates engine warm-up in cold climates
• Ideal for remote start, PTO, and extended idling applications
• Simple installation process
• Manufacturer Part Number: 1036609
• 12 Months or 24,000 Mile Warranty

Fits select 2006-2007 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 (LBZ Duramax) models.

The BD Diesel High Idle Control is an essential upgrade for diesel owners who frequently use remote starters, power take-off (PTO) equipment, or require extended idling in cold climates. By increasing the engine's idle speed, this controller facilitates faster warm-ups, prevents engine

Fits select 2001-2004 Chevrolet Silverado and GMC Sierra 2500 HD/3500 models equipped with the LB7 Duramax engine.

The BD Diesel High Idle Control module provides precise control over your engine's stationary RPM, solving the common issue of slow engine warm-ups and insufficient battery charging during extended idling. This kit is a vital addition for trucks used with PTO (Power Take-Off) accessories, remote starters, or in extreme cold climates where reaching operating temperature quickly is necessary to reduce engine wear and improve cabin comfort.

Designed for straightforward installation, this module allows the operator to toggle between preset speeds to suit the application, whether you need a slight bump in RPM for cooling or a higher setting for hydraulic equipment. The high idle helps maintain higher cylinder temperatures to prevent "wet stacking" and ensures the alternator provides sufficient output for auxiliary electronics.

• Adjustable idle settings: 800 RPM, 1200 RPM, and 1800 RPM
• Accelerates engine warm-up times in cold weather
• Ideal for remote starter and PTO applications
• Easy-to-install design
• Manufacturer Part Number: 1036600
• Warranty: 12 Months or 24,000 Miles

Fits select 1999-2003 Ford F-250 and F-350 Super Duty (7.3L).

The BD Diesel Crank Case Vent Filter Kit is designed to address oil vapor contamination in the intake system of 7.3L Power Stroke engines. In stock configurations, crankcase oil vapor passes through the vent and enters the intake stream, where it coats the turbocharger compressor wheel and intercooler cores. This residue buildup significantly reduces cooling efficiency and leads to the premature deterioration of silicone boots, causing them to balloon or blow off under boost.

This kit captures and filters these vapors before they reach the intake, maintaining the integrity of your charge air system components. Each kit includes all necessary hardware and clamps for a clean, professional installation. The process typically takes approximately two hours and provides long-term protection for your engine's turbocharger and cooling efficiency.

• Prevents silicone boot deterioration, ballooning, and blow-off
• Reduces oil vapor residue in the turbocharger and intercooler
• Maintains optimal intake system cleanliness and efficiency
• Complete kit includes all necessary mounting hardware and clamps
• Replacement filter element available: MPN 1302171
• Manufacturer Part Number: 1032170
• Warranty: 12 Months or 24,000 Miles

Fits select 2001-2010 Chevrolet Silverado and GMC Sierra 1500HD, 2500HD, and 3500HD models.

The factory steering linkage on GM HD trucks is a known weak point, particularly when paired with high-torque engines, lift kits, or oversized tires. This strain often leads to loose steering, front-wheel toe-in under load, or snapped tie rods. The BD Diesel Steering Upgrade Kit (1032150) reinforces the entire system to prevent catastrophic failure while retaining factory steering geometry for predictable handling and safety.

The kit features a forged I-beam centerlink that is 30% stronger than the original equipment, providing a rigid foundation for the tie rods. The tie rods themselves are 1.5x thicker than OEM, utilizing larger greaseable ball joints with sintered bearings to handle double the force of factory components. To accommodate leveling kits and prevent damage to tie rod seals, the kit includes sway bar end links that are 1 inch longer than stock, equipped with articulation-friendly polyurethane bushings.

• Forged I-Beam Centerlink: 30% stronger than OEM for reduced system flex
• Heavy-Duty Tie Rods: 1.5x thicker than factory with greaseable sintered bearings
• Extended Sway Bar End Links: 1 inch longer than factory to fit leveled trucks
• Geometry Retention: Maintains factory steering angles to prevent bump steer
• Polyurethane Bushings: Durable construction designed for articulation and longevity
• Installation: Replaces worn OE components and is compatible with other factory parts
• Manufacturer Part Number: 1032150

Fits select 2001-2019 Chevrolet Silverado and GMC Sierra 1500 HD, 2500 HD, and 3500 HD models.

Restore proper suspension geometry and eliminate front-end clunks with the BD Diesel Sway Bar End Link Upgrade Kit. These heavy-duty links are engineered to be 1 inch longer than factory components, specifically to accommodate trucks with stock height up to a 2-inch leveling or lift kit. By extending the link length, this kit corrects the sway bar angle and provides the necessary clearance for upgraded, larger-diameter tie rods that often interfere with factory setups.

Built for long-term durability, the kit features a high-strength through-bolt design and premium polyurethane bushings. The bushings are molded in an OEM-style profile to maintain full articulation while providing the stiffness needed for direct, confidence-inspiring steering control. This is a complete solution for replacing worn-out factory links or finalizing a steering and leveling upgrade.

• Increased Clearance: 1 inch longer than factory to clear upgraded tie rods and correct angles on leveled trucks.
• High-Strength Hardware: Robust through-bolt design handles higher stresses than standard OE links.
• Polyurethane Bushings: Durable material resists wear and weather while maintaining an OEM articulation profile.
• Direct Replacement: Designed for straightforward installation in approximately 1 hour.
• MPN: 1032126

Fits select 2001-2010 Chevrolet Silverado and GMC Sierra 1500HD, 2500HD, and 3500HD models.

Reinforce your GM truck's steering assembly with the BD Diesel Tie Rod Upgrade Kit. Engineering to eliminate the steering flex and component failure common in heavy-duty applications, these tie rods feature a shaft and inner ball joint 1.5x thicker than the factory equipment. Testing confirms this kit can withstand more than double the force of OEM rods, offering a robust mechanical upgrade over standard tie rod sleeves.

• 1.5x larger shaft and inner ball joint diameter for increased structural rigidity
• Heavy-duty greaseable ball joints equipped with sintered bearings for superior load-holding
• Designed to reduce steering flex and maintain alignment under heavy load or off-road use
• Durable construction provides a significantly longer service life than stock components
• Manufacturer Part Number: 1032125

Fits select 2011-2024 Chevrolet Silverado 2500/3500 HD and GMC Sierra 2500/3500 HD models.

Eliminate the weak points in your truck's steering system with the BD Diesel Tie Rod Upgrade Kit. Factory tie rods are susceptible to flexing and premature wear, especially when running larger tires or hauling heavy loads. This kit replaces thin OE components with tie rods that are 1.5x thicker than factory units, providing a much more robust solution than simple tie rod sleeves.

Engineered for durability, these tie rods feature larger inner ball joints equipped with sintered bearings for superior load-holding capacity and reduced wear. The greaseable design allows for easy maintenance, ensuring smooth steering performance and a long service life even under extreme conditions.

• Tie rod shaft and inner ball joint are 1.5x larger than OEM components
• Engineered to withstand over double the force of factory rods
• Greaseable ball joints with sintered bearings for improved durability
• Includes optional zerk fittings for installation
• Direct replacement for weak factory steering linkage
• Manufacturer Part Number: 1032124

Fits select 2003-2007 Ford F-250/F-350 Super Duty, Excursion, and E-350 Super Duty (6.0L).

Protect your Power Stroke engine from premature oil cooler failure with the BD Diesel Coolant Filter Kit (1032121). This bypass-style system is designed to capture casting sand, scale, and other debris that naturally circulates within the 6.0L cooling system. By removing these particulates, you significantly reduce the risk of clogging the narrow passages of the OEM oil cooler, which is a common cause of high oil temperatures and subsequent engine damage.

The kit features a high-quality filter head and a non-proprietary Donaldson P554685 spin-on filter, ensuring easy maintenance and low-cost replacement. The included mounting bracket and precut hoses allow for a straightforward installation that mounts in-line with the existing engine coolant lines.

• Preventative Maintenance: Removes abrasive contaminants to protect the oil cooler and water pump seals.
• Non-Proprietary Filter: Uses the widely available Donaldson P554685 filter.
• Durable Construction: Includes heavy-duty hoses, clamps, and a vehicle-specific mounting bracket.
• Serviceability: Features a bypass valve design for easy filter replacement.
• Warranty: Covered by a 12-month or 24,000-mile manufacturer warranty.

What's Included: Filter head, spin-on filter, mounting bracket, hoses, clamps, fittings, and all necessary mounting hardware.

Fits 2017-2022 Ford F-250 and F-350 Super Duty 4WD trucks (Gas and Diesel).

The BD Diesel Adjustable Track Bar is the definitive solution for correcting steering geometry and eliminating the notorious "Death Wobble" common on heavy-duty Ford trucks. Engineered to provide a more positive steering feel and reduce wander, this track bar replaces the factory unit with a significantly stronger, heat-treated forged component featuring no welded joints for maximum structural integrity.

Designed for convenience and longevity, the bar is fully adjustable while still mounted to the truck, allowing you to center your axle on vehicles ranging from stock height up to a 6-inch lift. It comes protected by a black Cerakote finish that resists corrosion and impacts better than traditional powder coating. This kit arrives ready for installation with a pre-installed OEM ball joint and a long-lasting, easily serviceable polyurethane bushing.

• Forged and heat-treated construction with no welded joints
• Durable black Cerakote finish resists flaking and road debris corrosion
• Fully adjustable on the vehicle to accommodate up to 6-inch lifts
• Includes pre-installed OEM ball joint and polyurethane bushing
• Compatible with both gas and diesel 4WD models
• Manufacturer Part Number: 1032111

Fits 2005-2016 Ford F-250 and F-350 Super Duty (Gas & Diesel). This adjustable track bar is the definitive solution for correcting axle alignment and eliminating steering wander or the notorious "death wobble" common in Ford Super Duty trucks.

Built from heavy-duty 1-3/8" Drawn Over Mandrel (DOM) seamless tubing with a 0.313" wall thickness, this bar replaces the prone-to-wear OEM ball joint design with a rigid, high-strength assembly. The forged components are heat-treated for maximum durability under high-stress conditions. It features an on-vehicle adjustment mechanism, allowing you to center your axle without removing the bar from the truck—making it ideal for trucks with lifts ranging from stock height up to 6 inches.

• Rigid Construction: 1-3/8" OD x 0.313" wall DOM seamless tubing with precision welded collars.
• On-Vehicle Adjustment: Turnbuckle design allows for easy axle centering while installed.
• Enhanced Durability: Durable, high-durometer polyurethane bushings for positive steering feel and minimal deflection.
• Premium Finish: Coated in black Cerakote to resist corrosion, flaking, and road debris impact.
• Fitment Range: Accommodates up to a 6-inch suspension lift.
• MPN: 1032110
• Warranty: 12 Months or 24,000 Miles.

Fits 2011-2022 Ford F-250 and F-350 Super Duty models (6.7L).

Installing a suspension lift, leveling kit, or larger tires changes the front axle pivot angle, often reducing positive caster. This geometry shift can cause steering wander, "death wobble," pulling, and poor steering wheel return to center. The BD Diesel Cam Caster Adjusting Kit is designed to correct these issues by restoring front-end stability on radius arm-equipped Super Duty trucks.

By installing this kit on the factory radius control arms, you can gain up to 3.0 degrees of additional positive caster. This adjustment helps eliminate wandering and reduces tire cupping, ensuring your truck tracks straight and remains easier to control on or off-road. The kit is compatible with both gas and diesel configurations and is designed for a straightforward installation.

• Provides up to 3.0 degrees of additional positive caster adjustment
• Corrects steering instability caused by lifts and leveling kits
• Reduces tire cupping and improves steering wheel return to center
• Mounts directly to factory radius control arms
• Compatible with gas and diesel models
• Manufacturer Part Number: 1032103

Fits select 2000-2009 Dodge Ram 2500 and 3500 4WD models (Gas & Diesel).

OE sway bar end links on Dodge Ram 4WD pickups are a notorious maintenance headache, often wearing out, seizing, or even snapping during axle drop on 2-post lifts. BD Diesel’s Sway Bar End Links solve these issues with a heavy-duty dual-pivot design that provides significantly more articulation while reducing mechanical stress on the suspension system.

This kit features long-life urethane bushings engineered to provide maximum flex without the risk of breaking or "pounding out" like standard rubber components. Every part is designed for easy serviceability, allowing for low-cost maintenance over the life of the vehicle. The kit includes all necessary hardware and can be installed in approximately one hour using standard tools.

• Dual Pivot Design: Allows for a greater range of articulation and significantly less stress on the links.
• Urethane Bushings: High-durability material provides greater flex and resists seizing due to road salt or moisture.
• Easy Serviceability: Designed so that wearing items are simple and low-cost to replace.
• Lift Kit Note: Trucks with more than a 3-inch lift require a sway bar offset spacer (typically included in most lift kits).

• Manufacturer Part Number: 1032050
• Replacement Bushing Set: Available under p/n 1312051
• Installation Time: Approximately 1 hour
• Warranty: 12 Months or 24,000 Miles

Fits select 2013-2025 Ram 2500 and 3500 trucks (Gas & Diesel).

The BD Diesel Adjustable Track Bar is engineered to restore steering precision and eliminate the infamous "Death Wobble" common in leveled or lifted Ram trucks. Unlike the factory component, this track bar is constructed from high-strength, heat-treated forged steel to handle the increased leverage of larger tires and suspension modifications. It features a durable black Cerakote finish for superior corrosion resistance and utilizes serviceable polyurethane bushings for long-lasting performance.

Designed for convenience, this kit allows for centering the axle without removing the bar from the vehicle. It accommodates lifts up to 4 inches on its own, and can support even higher lifts when paired with a drop bracket. This is a robust replacement for the factory bar, providing a more positive steering feel and significantly reduced wander on the highway.

• Eliminates steering wander and "Death Wobble" in lifted or stock trucks
• Fully adjustable while mounted on the vehicle for precise axle centering
• Accommodates up to 4-inch lifts (and higher with drop brackets)
• Built from high-strength, heat-treated forged components
• Exclusive black Cerakote coating protects against corrosion and road debris
• Long-lasting, easily serviceable polyurethane bushings
• Compatible with both Gas and Diesel configurations
• Manufacturer Part Number: 1032018
• Compatible Replacement Poly Bushing Set: PN 1302038

Fits 2003-2013 Dodge Ram and Ram 2500/3500 4WD models (Gas & Diesel).

Reclaim steering precision and eliminate the notorious front-end "Death Wobble" with the BD Diesel Adjustable Track Bar. The factory track bar utilizes a ball-joint design that is prone to wear, leading to side-to-side axle movement, steering wander, and accelerated tire wear. This heavy-duty replacement replaces the weak OEM joint with durable, high-durometer polyurethane bushings and a massive 1-3/8" outer diameter bar.

Engineered for lifted and leveled trucks, this bar is fully adjustable to center your front axle for up to 4 inches of lift (and even higher when used with a drop bracket). The adjustment can be made while the bar is still mounted on the truck, saving time during the alignment process. Each bar is finished in black Cerakote for superior corrosion resistance and durability against road debris compared to standard powder coating.

• Built from 1-3/8" Drawn Over Mandrel (DOM) seamless heavy-wall 0.313" tubing
• Formed and precision-welded collars for maximum structural integrity
• High-strength, heat-treated forged components for long-term reliability
• Long-lasting, easily serviceable polyurethane bushings
• Black Cerakote finish resists flaking and corrosion
• Fully adjustable on the vehicle to accommodate up to 4" lifts
• Replacement poly bushing set available separately (p/n 1302033-1)
• Manufacturer Part Number: 1032013-F

Fits 1994-2002 Dodge Ram 2500 and 3500 4WD models (Gas & Diesel).

The BD Diesel Adjustable Track Bar is a heavy-duty steering solution designed to eliminate front-end wandering and the notorious "Death Wobble" in Second-Gen Dodge trucks. By replacing the failure-prone factory ball joint design with a rigid frame-mount bracket, this kit provides a positive steering feel and maintains precise front axle alignment. It is fully adjustable while installed on the vehicle, allowing you to center the axle on trucks with up to a 4-inch suspension lift.

Engineered for extreme durability, the bar is constructed from 1-3/8 inch Drawn Over Mandrel (DOM) seamless heavy-wall 0.313-inch tubing with precision-welded collars. The assembly is protected by a double-coated black Cerakote finish, which offers superior corrosion resistance and durability against road debris compared to traditional powder coating.

• Replaces factory ball joint design with a rigid frame-mount bracket
• Constructed from 1-3/8 inch OD x 0.313-inch wall DOM seamless tubing
• Double-coated black Cerakote finish resists corrosion and flaking
• Equipped with long-lasting, easily serviceable polyurethane bushings
• Fully adjustable on the vehicle to accommodate 0 to 4-inch lifts
• Helps eliminate side-to-side axle movement and steering wander
• Manufacturer Part Number: 1032011-F

Fits select 1994-2002 Dodge Ram 1500, 2500, and 3500 4WD models (5.9L).

The BD Diesel Steering Stabilizer Bar, also known as "The Wobble Stopper," is engineered to eliminate the common steering wander and wobble issues found in 2nd Gen Dodge Ram trucks. By adding a secondary support point to the steering box sector shaft, this stabilizer virtually eliminates frame flex at the steering box mounting point and compensates for excessive shaft play that often leads to a loose steering feel.

This kit features a greaseable, high-quality bearing for long-term reliability and is finished in a durable silver vein powder coat for superior corrosion resistance. Designed as a direct bolt-on application, installation can be completed in approximately one hour using basic hand tools and the included high-strength mounting hardware.

• Eliminates steering wander and wobble caused by sector shaft play
• Reduces frame flex at the steering box mounting point for a more positive steering feel
• Greaseable bearing allows for easy maintenance and extended service life
• Silver vein powder-coated finish for maximum durability and rust prevention
• Easy bolt-on installation in approximately one hour
• Includes high-strength mounting hardware
• Manufacturer Part Number: 1032004
• Warranty: 12-Month / 24,000-Mile