Our replacement connector with 4.5" pigtail will get you back on the road quickly. Includes heat-sealable butt-style connectors. Application Notes 2003-2018 Dodge RAM Camshaft Sensor (Mopar p/n: 2872277) 2003-2018 Dodge RAM Crank Position Sensor (Mopar p/n: 2872277) Replaces Mopar: 5014010AB

This Part Fits:

Ready to upgrade your factory under bed fuel filtration on your 2017 – 2024 Ford 6.7L Powerstroke? The latest OEM+ solution from Fleece Performance is a true drop-in" upgrade to the furnace style filtration that requires absolutely no modification of your existing fuel lines or routing of new fuel lines! Direct Drop-In The new filter assembly mounts in the same location as the factory filter housing and mates directly to all factory fuel lines for the absolute cleanest installation on the market. The kit retains full functionality of the factory WIF circuitry and mates directly to the chassis harness while allowing you to convert to a convenient spin-on style filter. Improved Filter Performance The Donaldson P553203 offers improved efficiency (99%) at low micron levels (4 micron) vs. the stock filter while ensuring peak water separation performance. Fuel Heater Capable Cold climate owners we have you covered! Our optional fuel heater is available for all models including Cab & Chassis. Easily installs into the side of the filter base for full fuel flow heating prior to the filter. Learn more: Fuel heater and harness for 17+ Fleece filter base (FPE-FH-FMC-1724) - pickup truck models. Fuel heater extension harness for 17+ Fleece filter base on C&C applications (FPE-FH-FMC-1724-CC-EXT) – required for use in conjunction with FPE-FH-FMC-1724.

• Improved Filter Performance
• Fuel Heater Capable
• Direct Drop-In

This Part Fits:

The plastic factory injector return connector on the 2017-2024 6.7L Power Stroke is susceptible to breakage from heat, vibration, rough handling and frequent disconnections for fuel filter maintenance. Upgrade your injector return fitting and eliminate the risk of a broken fuel line with our heavy duty billet aluminum injector return fitting. Featuring a dual O-ring internal design and serviceable barb fitting the Fleece Performance injector return fitting will ensure you're not left stranded with a broken, non-repairable fuel line. Our 5-pack kit for fleets and servicing outlets also includes our fitting service kit (FPE-FMC-FF-RLK-1724-SER) to perform a quick repair if necessary during filter maintenance. Kit includes: Quantity 5 - FPE-FMC-FF-RLK-1724 Quantity 1 - FPE-FMC-FF-RLK-1724-SER Features Heavy duty, machined billet aluminum housing. Dual O-ring internal design for increased sealing. Serviceable billet aluminum barb fitting. Easy to install and remove during filter maintenance Application Notes This kit is designed to work with both OEM and aftermarket under hood fuel filter assemblies including Fleece Performance P/N: FPE-FMC-UHFA-1123. A service kit is available for this product, Fleece Performance P/N: FPE-FMC-FF-RLK-1724-SER. The kit includes replacement O-rings and locking tabs. A replacement barb fitting is available for this product, Fleece Performance P/N: FPE-AN4-332B.

• Easy to install and remove during filter maintenance
• Dual O-ring internal design for increased sealing
• Heavy duty, machined billet aluminum housing
• Serviceable billet aluminum barb fitting

This Part Fits:

Replacement high pressure fuel lines from Fleece Performance. These are a direct replacement for your cracked, broken, or leaking injector lines. This kit includes a complete set of 8 lines. Application Notes Replaces GM Part# 97378825 (qty 2) Replaces GM Part# 97378828 (qty 2) Replaces GM Part# 97378826 (qty 2) Replaces GM Part# 97378827 (qty 2)

This Part Fits:

The Donaldson P553203 Fuel Filter is a direct replacement filter for the Fleece L5P Duramax Fuel Filter Kits and 1998.5-2018 Dodge Ram Cummins Auxiliary Fuel Filter Kits. The filter is rated at 3 microns. This case quantity includes 12 filters. Fitment: FPE-L5P-FFBA-1719 FPE-L5P-FFBA-1920 FPE-34783 FPE-34780

Brand new Bosch CP3 for the 2006-2010 Duramax from Fleece Performance! Direct drop in replacement for stock injection pump. Pump include a new snout O-ring APPLICATION NOTE: The fuel pressure regulator will need to be scaled appropriately when installed in a 2001-2005 (LB7 or LLY)You can get the values here.

This Part Fits:

Upgraded 3/8" diameter pushrods for Cummins 24V diesel engines. Produced from 4130 chrome molybdenum steel and heat treated to Rockwell Rc60 for outstanding strength and rigidity. These pushrods are designed to stand up to higher valve spring pressure, RPM, and cylinder pressure while minimizing valvetrain deflection. 3/8" diameter, 1-piece, .135 wall, factory length One-piece forged OEM stock length Robust forged cup ends

This Part Fits:

Trust Fleece Performance to bring you the best OE alternative parts you need! Our replacement head gasket for the 2003-2007 Dodge 5.9L Cummins will ensure your engine gets the optimal reseal. Features: 1.25 mm thickness Multi-layer steel construction Meets or exceeds OE specifications Application Notes: Replaces Cummins P/N: 3958645

• Meets or exceeds OE specifications
• Multi-layer steel construction
• 1.25 mm thickness

This Part Fits:

This Part Fits:

This Part Fits:

Complete installation kit for CW style turbochargers on the 2003-2007 RAM with 5.9L Cummins. Kit Includes: Turbocharger exhaust inlet gasket, T3 non-divided Turbocharger oil drain gasket Turbocharger mounting studs (4) Turbocharger mounting nuts (4)

This Part Fits:

Fleece Performance Billet Rocker Arm Bridges for 1998.5-2018, 24V 5.9L/6.7L Cummins (Set of 12) FEATURES: These bridges offer a massive 2.5-times strength improvement over the factory bridges. Machined from billet steel, the bridges are surface ground for flatness, feature improved oiling to the valve stems, and are case hardened and carburized for strength.

• Machined from billet steel the bridges are surface ground for flatness feature improved oiling to the valve stems, case hardened & carburized for strength.
• These bridges offer a massive 2.5-times strength improvement over the factory bridges.

This Part Fits:

Improved casting. This isn’t your run of the mill, rinse and repeat OE casting.  Engineered from the ground up with years of testing and development - our higher tensile strength alloy castings incorporate increased wall thickness and additional material where it counts, providing for a more durable and longer lasting cylinder head.Extreme duty valve seats.  Race proven and stronger than OEM – our American made valve seats provide for longevity and stability in the cylinder head. Produced from a tungsten alloy for increased hardness, these seats deliver a substantially higher wear resistance vs. a stock replacement seat.Single piece O-ring. Our 6.0L cylinder head is the only cylinder head available with a single piece hoop style O-ring.  Our single piece O-ring ensures complete sealing of combustion vs. traditional stainless wire that has a seam.Application NotesAll 20mm dowel heads are configured for 2-bolt rocker box configurations.Fleece Performance recommends the use of 6.4L pushrods (Ford Part No. 8C3Z-6565-B) when installing these cylinder heads. 6.4L pushrods are 0.050” shorter in length vs. a 6.0L pushrod and will accommodate the tolerance stack ups that can be encountered with a replacement cylinder head. Head gasket not included. We recommend the use of Ford Part No.KZ3Z-6051-B.Cylinder Head Identification - Selecting the proper modelFollow the flow chart below to determine the appropriate cylinder head and components for your application (this information may also be found in our installation instructions). The engine serial number can be found on the rear, driver’s side of the engine block. An alternate location for the engine serial number can be found on the identification sticker located on top of the fuel injector control module (FICM). This only applies for vehicles with their original FICM. If you are unsure if the FICM is original to the vehicle, read the serial number on the back of the engine block.

• Re-manufactured OE casting

This Part Fits:

Upgrade your Cummins valve springs and retainers with our Fleece Performance spring and retainer kit. Our springs are manufactured from super clean" Hi-Tensile Chrome Silicon steel with a proprietary multi-step heat treating process that minimizes load loss. These springs have a seat pressure of 105 lbs. with an open pressure of 195 lbs. at maximum lift. The retainers are thru-hardened 4140 chrome moly steel and have a black oxide finish.

This Part Fits:

Auxiliary fuel filter and line kit for your 1998.5-2002 Dodge Cummins. The kit includes everything you need to properly route, plumb and filter fuel for your VP engine from the tank to the VP44. Kit includes: Donaldson 3 micron fuel filter and water separator (Donaldson P/N P553207) Filter base with integral mounting Distribution filter block / filter coupler Push Lock hose and all necessary AN and barb fittingsApplication NotesFor 1998.5-1999 model year Ram trucks a new chassis-side fuel heater connector pigtail is required. Use Fleece Performance part number FPE-HAR-CUMM-FH-PT.

This Part Fits:

Our Fleece Performance adapter harness allows the early (2007.5-2012) Dodge 6.7L to run the updated turbo actuator that is used on 2013 and up VGT Turbochargers. Replacement for Cummins P/N 5347703.

This Part Fits:

The Duramax VNT Cheetah Turbocharger is a drop-in replacement turbocharger for 04.5-10 Duramax diesels. It comes with a Fleece Performance 63mm FMW compressor wheel and 66mm high flow turbine wheel. This drop-in replacement turbo is guaranteed to enhance your driving experience. You'll enjoy the spool up and throttle response of a small turbo and still get the big top end power you're looking for. Rated at 625 RWHP this is the ultimate combination for dual purpose applications. If you are towing during the week, and sled pulling on the weekend, the 63mm VNT Cheetah is just the ticket. Stock Appearing: 100% Stock Appearing. This turbocharger uses the stock housings with updated internals. This allows you to keep all factory systems intact yet allow you to safely run 40-45 PSI of boost. Proven Technology: These turbochargers are built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. No other drop in replacement aftermarket VNT turbo on the market can offer you that. Powerful Yet Responsive: These turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. Exclusive FMW Wheel Technology: Forged Milled Wheels are Stronger than Billet Faster Spool-Up Increased Throttle Response Broader Torque Curve

This Part Fits:

Universal 5" molded rubber intake elbow for custom routings and installations. Includes two stainless steel band clamps.

Kit Contents: FPE-CTDT-KIT, FPE-CRTFL-S3S4, FPE-6.7CR-COOL-PLUGTurbo Stud Kit, T4 Turbo Gasket

This Part Fits:

Fleece Performance 89-07 Dodge 5.9L Cummins S300-S400 Turbo Installation Kit

This Part Fits:

Replace your leaking transmission lines with our heavy duty, high flow, flexible transmission lines. Our kit is the most complete replacement transmission line kit available for your LML truck! With an increased diameter over stock and heavy duty hose wrap, these lines will increase overall flow and protect against future failures. Kit Includes: (3) 5/8" ID transmission lines with AN fittings (6) 7/8"-14 O-ring to -10AN fittings (2) Large OD washers Double hose clamps, locking cable ties, and fir tree cable clamps Features: Increased diameter over stock - 5/8" hose Explosion proof polyester hose protection sleeve Application Notes: Not for use on Cab and Chassis applications

• Explosion proof polyester hose protection sleeve
• Increased diameter over stock - 5/8" hose

This Part Fits:

Replace your leaking transmission lines with our heavy duty, high flow, flexible transmission lines. Our kit is the most complete replacement transmission line kit available for your LML truck! With an increased diameter over stock and heavy duty hose wrap, these lines will increase overall flow and protect against future failures. Kit Includes: (3) 5/8" ID transmission lines with AN fittings (6) 7/8"-14 O-ring to -10AN fittings (2) Large OD washers Double hose clamps, locking cable ties, and fir tree cable clamps Features: Increased diameter over stock - 5/8" hose Explosion proof polyester hose protection sleeve Application Notes: Not for use on Cab and Chassis applications

• Explosion proof polyester hose protection sleeve
• Increased diameter over stock - 5/8" hose

This Part Fits:

Replace your leaking transmission lines with our heavy duty, high flow, flexible transmission lines. Our kit is the most complete replacement transmission line kit available for your LBZ or LMM truck! It includes all of the necessary fittings whether your truck is running a stock radiator or Setrab equipped radiator. Kit Contents: Transmission Lines (6) 7/8"-14 O-ring to -10AN fittings (2) M22x1.5 to -10AN Setrab fittings (2) Large OD washers (1) Double hose clamp (2) Locking cable ties

This Part Fits:

Replace your leaking transmission lines with our heavy duty, high flow, flexible transmission lines. Our kit is the most complete replacement transmission line kit available for your LB7 or LLY truck! It includes all of the necessary fittings whether your truck is running a stock radiator or Setrab equipped radiator. Kit Contents: Transmission Lines (6) 7/8"-14 O-ring to -10AN fittings (2) 3/4"-16 O-ring to -10AN fittings (2) 1/2" NPT to -10 AN fittings (2) M22x1.5 to -10AN Setrab fittings (2) Large OD washers (1) Double hose clamp (2) Locking cable ties

This Part Fits:

Replace your leaking transmission lines with our heavy duty, high flow, flexible transmission lines. Our kit is the most complete replacement transmission line kit available for your L5P truck! With an increased diameter over stock and heavy duty hose wrap, these lines will increase overall flow and protect against future failures. Kit Includes: (3) 5/8" ID transmission lines with AN fittings (6) 7/8"-14 O-ring to -10AN fittings (2) Large OD washers Double hose clamps, locking cable ties, and fir tree cable clamps Features: Increased diameter over stock - 5/8" hose Explosion proof polyester hose protection sleeve Application Notes: Not for use on Cab and Chassis applications

• Explosion proof polyester hose protection sleeve
• Increased diameter over stock - 5/8" hose

This Part Fits:

Fix your leaking transmission lines with these heavy duty, high flow, flexible transmission lines. This kit is complete with everything needed to get the job done right the first time.

This Part Fits:

All new for the 1994-2002 Dodge RAM! Control your transmission temperatures and tow with confidence with the latest improvement for your Dodge Ram from Fleece Performance. Engineered from the ground up to provide you with the most efficient and highest performing replacement transmission cooler on the market with a massive 2X increase in heat rejection vs. the stock transmission cooler. Combined with all new heavy-duty transmission lines and AN fittings, our kit is the most complete option available to keep your rig running cool! Features Drop-in replacement for the factory transmission cooler with no cutting or splicing of OE lines. Massive 2X increase in heat rejection and efficiency vs. stock! 20% increase in face area of the transmission cooler vs. stock! New heavy duty transmission lines and AN fittings for a leak-free installation. 100% pressure and leak tested.

• Drop-in replacement for the factory transmission cooler with no cutting or splicing of OE lines
• New heavy duty transmission lines and AN fittings for a leak-free installation
• Massive 2X increase in heat rejection and efficiency vs.stock

This Part Fits:

The Fleece Performance TapShifter allows you to shift your 2001-2005 GM Allison Transmission with the touch of a button just like the 2006 and newer trucks. Perfect for towing, drag racing, daily driving and everything in-between, the TapShifter installs in no time and provides factory-like operation, functionality and styling. The TapShifter can be used in the gas or diesel 2001-2005 trucks with an Allison Transmission. Installation: The TapShifter installs using OEM high quality connectors for a completely plug and play installation in less than 30 minutes. Operation: TapShifter Operation is very straight forward. To downshift depress the "-" button on the shifter. To upshift press the "+" button. The TapShifter will allow you to select a range with the shift lever and then tap up and down without worry of tapping to a higher range than selected. This feature is great for sled pullers who do not want to shift to 4th gear on the track! Features: Easy Plug & Play Installation Limits Up-Shifts Overdrive Disable Command Downshifts Decrease Gear Hunting NOTE: 01-02 models will require TCM Re-Flash to enable overdrive lock-out and proper function.

• Easy Plug & Play Installation
• Decrease Gear Hunting
• Command Downshifts
• Overdrive Disable
• Limits Up-Shifts

This Part Fits:

This black 1.5in T4 Pedestal Spacer is designed for use with T4 Turbos installed on Duramax engines when an extra inch of elevation out of the valley is required, although it could be used in any T4 application. NOTE: A T4 gasket should be used on the top and bottom of the spacer to provide a proper seal.

We couldn't even leave a stack cover alone, we had to upgrade that too! Fleece Performance stack covers are made from heavy duty vinyl and come complete with a properly sized band clamp to ensure a tight fit.