This genuine TiAL Sport 10mm air fitting provides a secure, leak-free connection for vacuum and boost signal lines. Engineered for high-heat environments, this fitting is a direct replacement or additional port for TiAL wastegates and blow-off valves, ensuring precise pressure delivery to your forced induction control components.

• Manufacturer: TiAL Sport
• Size: 10mm
• Application: Compatible with various TiAL wastegates and BOVs
• Function: Vacuum/Boost signal port
• Quantity: Single (1) fitting

Constructed to handle high-pressure duty cycles, this fitting replaces worn or damaged hardware to maintain the integrity of your boost control system. Whether you are plumbing a new setup or refreshing an existing one, TiAL hardware provides the reliability required for performance applications.

The TiAL Sport MVR Diaphragm Assembly is the genuine replacement component designed to maintain or rebuild the MVR series external wastegate. Over time, extreme under-hood heat cycles and high boost pressures can fatigue the internal diaphragm, leading to boost leaks, inconsistent gate operation, or boost creep. This factory-spec assembly allows you to restore the actuator's seal integrity and ensure precise response to boost control signals.

• Genuine TiAL Sport replacement part for MVR series wastegates
• Engineered to withstand high-temperature environments and high-duty cycles
• Direct fit for the internal actuator housing
• Critical for maintaining consistent manifold pressure and wastegate reliability

The TiAL Sport 60mm clamp inlet is a precision-engineered mounting solution designed for high-performance turbocharger systems. This inlet flange provides a secure, leak-free interface for V-band clamp assemblies, ensuring the stable attachment of 60mm components under extreme thermal stress and high-pressure conditions.

Machined to exact tolerances, this component facilitates quick removal and installation of wastegates or custom assemblies without the need for traditional gaskets. It is designed to be welded directly to the exhaust manifold or crossover pipe, offering a professional-grade mounting point that resists warping and exhaust leaks.

• Compatible with 60mm V-band clamp systems
• High-temperature resistant material construction for long-term durability
• Precision machined surfaces for a positive, leak-proof seal
• Genuine TiAL Sport component for custom turbo builds

Maintain precise boost control and wastegate reliability with this genuine TiAL Sport replacement diaphragm assembly. Engineered specifically for use with TiAL F46 (46mm) and V60 (60mm) external wastegates, this assembly allows you to service your wastegate actuator and restore factory-level performance without replacing the entire unit.

The diaphragm is constructed from high-temperature, Nomex-reinforced silicone to withstand the extreme heat and constant pressure cycles found in high-performance turbocharged engine bays. A worn or torn diaphragm can lead to dangerous boost spikes or a total loss of boost control; replacing it ensures the valve responds accurately to your boost controller's signals.

• Compatible with TiAL Sport F46 and V60 external wastegates
• High-temperature Nomex-reinforced silicone construction for durability
• Restores consistent boost response and actuator sealing
• Genuine TiAL Sport replacement component
• Fits 46mm and 60mm actuator housings

This genuine TiAL Sport diaphragm assembly is the direct replacement component for 38mm, 41mm, and 44mm wastegate units. Over time, extreme manifold heat and constant pressure cycling can lead to diaphragm fatigue or tearing, resulting in inconsistent boost levels and sluggish actuator response. Installing a fresh assembly restores the pneumatic seal within the wastegate housing, ensuring the valve opens and closes precisely according to your boost controller or spring pressure.

• Genuine TiAL Sport replacement component
• Compatible with 38mm, 41mm, and 44mm external wastegate models
• High-temperature reinforced elastomer construction for long-term durability
• Restores accurate boost control and prevents actuator pressure leaks
• Designed for exact fitment to maintain original equipment performance

This TiAL Sport stainless steel outlet flange is the standard weld-on solution for the discharge side of the MV-R 44mm external wastegate. It provides a precise mating surface for custom dump tube fabrication, ensuring a leak-free seal where exhaust gases exit the gate. Constructed from heavy-duty stainless steel, it is designed to withstand the extreme thermal cycling common in high-performance turbocharged applications.

• Specifically designed for TiAL Sport MV-R 44mm external wastegates
• Stainless steel construction for maximum heat and corrosion resistance
• Weld-on design for custom exhaust and dump tube fabrication
• Precision-machined for a high-tolerance fit and reliable sealing

This TiAL Sport 38mm Valve Seat is a direct replacement component engineered specifically for the TiAL F38 external wastegate. As a critical interface within the wastegate body, the seat provides the precision sealing surface required for the valve to maintain accurate boost pressure. Over time, extreme exhaust temperatures and carbon accumulation can pit or wear the original seat, leading to exhaust leaks and inconsistent boost control.

• Fits TiAL Sport F38 (38mm) external wastegates
• Precision machined to ensure a leak-free seal and reliable valve operation
• Direct-fit replacement for worn, pitted, or heat-damaged factory seats
• High-temperature resistant construction for durability in high-performance exhaust environments

Maintain the integrity of your turbocharger's exhaust path with a genuine TiAL Sport 38mm Wastegate Gasket. Engineered to withstand the extreme thermal cycles found in high-performance exhaust systems, this gasket ensures a reliable, leak-free seal between the wastegate and its mounting flange, preventing boost control issues and exhaust leaks.

• Designed specifically for TiAL Sport 38mm external wastegates
• High-temperature material construction prevents premature failure and blowouts
• Precision-cut for an exact fit on standard 2-bolt wastegate flanges
• Essential for ensuring all exhaust gas is properly routed through the wastegate valve
• Direct replacement for worn or crushed gaskets during maintenance or turbo upgrades

The TiAL Sport 10mm Double Air Fitting is a precision-engineered component designed for reliable pneumatic connections within high-performance turbocharging systems. These fittings are essential for routing clean vacuum and boost signals to your wastegate or blow-off valve, providing a secure connection that resists leaks under high-pressure conditions.

• Genuine TiAL Sport engineering for precise fitment and durability
• 10mm sizing compatible with standard pneumatic lines and hoses
• Double-port configuration facilitates complex vacuum routing or dual-port control setups
• Ideal for use with TiAL wastegates and BOVs requiring pneumatic signal distribution
• Constructed to withstand the high-heat and vibration of a performance engine bay

The TiAL Sport MVR 44mm external wastegate (MVR 44) provides high-performance boost control in a compact package designed for tight engine bays. As the successor to the legendary V44, it maintains the same flange orientation while offering a shorter overall height for easier packaging. This wastegate is engineered for extreme thermal loads, featuring a 347 stainless steel investment cast housing and a high-temperature NiCrFe alloy valve.

This MVR wastegate includes integrated water cooling ports (two -4AN ports) that can be utilized to stabilize actuator temperatures in high-duty cycle or endurance racing environments. It comes pre-configured with a 14.5 PSI (1.0 bar) spring and a purple anodized 6061 aluminum actuator top for long-lasting corrosion resistance and a custom look.

• Brand: TiAL Sport
• Series: MVR (44mm)
• Part Number: 003409
• Spring Pressure: 14.5 PSI (1.0 bar)
• Valve Material: NiCrFe Alloy
• Housing Material: 347 Stainless Steel
• Diaphragm: High-temperature Nomex-reinforced silicone
• Finish: Purple Anodized Actuator
• Included Hardware: Two TiAL -4AN water fittings, M10x1.0 plugs, and V-band inlet/outlet clamps and flanges

The TiAL Sport MVR 44mm external wastegate provides high-performance boost control in a compact, V-band package. Designed to replace the legacy V44, the MVR is shorter in height, making it ideal for tight engine bays and custom manifold configurations. This unit features integrated water cooling ports (two -4AN ports) to manage temperatures in high-heat racing environments without sacrificing performance or diaphragm longevity.

• Precision Construction: Features a high-temperature NiCrFe-based alloy valve and a 347SS valve housing for maximum durability under extreme exhaust gas temperatures.
• Complete Tuning Kit: Includes a full set of 17-7 PH stainless steel springs, allowing you to configure boost pressures specifically for your application.
• V-Band Mounting: Utilizes 44mm V-band inlet and outlet flanges for a secure, leak-free seal and simplified installation/removal.
• Reliable Actuation: Equipped with a high-temperature silicone Nomex-reinforced actuator diaphragm.
• Included Hardware: Includes MVR 44mm unit (Red), two TiAL V-band clamps, two water fittings, and the complete spring assortment.
• Manufacturer Part Number: 002951

The TiAL Sport MVR 44mm external wastegate is a high-performance, compact solution for turbocharged applications requiring precise boost management. Designed as a shorter, more versatile alternative to the F44, the MVR series features a reduced overall height to fit into tight engine bays while maintaining superior flow characteristics and reliability.

• 44mm valve size for efficient exhaust bypass and boost stability
• 14.5 PSI (1.0 bar) spring pressure for consistent performance
• Compact design allows for easier installation in restricted manifold spaces
• Integrated water cooling ports (optional) to manage thermal loads and protect the diaphragm
• Includes high-quality V-band clamps and necessary hardware for a secure, leak-free installation
• Anodized Black finish for durability and a clean engine bay aesthetic
• Manufacturer Part Number: 003414

The TiAL Sport MVR 44mm external wastegate is engineered for high-performance turbocharged applications where space and precise boost control are critical. As the successor to the original V44, the MVR maintains the same flange footprint while offering a more compact actuator top, measuring just 3.7 inches in height. This unit is constructed with a high-temperature NiCrFe-based alloy for the valve and a 347 stainless steel valve housing, ensuring long-term durability under extreme exhaust temperatures.

• Valve Diameter: 44mm
• Materials: 347SS valve housing, NiCrFe alloy valve, and 17-7 PH stainless steel actuator spring
• Cooling: Integrated water-cooling ports (optional use) to maintain stable diaphragm temperatures in demanding conditions
• Adjustability: Includes a complete set of springs for various boost pressure configurations
• Included Hardware: Two TiAL -AN4 water fittings, MVR inlet/outlet V-band clamps and flanges, and all necessary air fittings
• Manufacturer Part Number: 002949

This kit includes every spring available for the MVR series, allowing for a wide range of boost levels without purchasing additional hardware. The V-band flange connections ensure a leak-free seal and simplify installation and removal for maintenance.

The TiAL Sport MVR 44mm external wastegate offers precise boost control in a compact package, making it the ideal solution for high-performance turbocharged applications with limited engine bay clearance. This wastegate features a significantly shorter height than the original V44, allowing for easier integration into complex manifolds.

Built for durability under extreme thermal loads, the MVR uses a 347 stainless steel investment cast housing and a high-temperature NiCrFe based alloy valve. To ensure consistent performance during sustained high-boost runs, it includes two -4AN water cooling ports that can be utilized to manage actuator temperatures.

• Valve Diameter: 44mm
• Housing Material: 347 Stainless Steel
• Valve Material: NiCrFe based alloy
• Inlet/Outlet: V-Band flanges for secure, leak-free mounting
• Diaphragm: High-temperature Nomex-reinforced silicone
• Included Springs: Full set of springs included for adjustable boost pressures
• Included Hardware: Two TiAL -4AN water fittings, air fittings, and stainless steel V-band clamps
• Manufacturer Part Number: 001930

The TiAL Sport V60 Wastegate Special Diaphragm is a critical service component designed to restore precise boost control to your turbocharger system. Over time, the internal diaphragm in a wastegate can degrade or harden from extreme under-hood temperatures and high-duty cycles, leading to boost leaks or inconsistent pressure management.

This genuine TiAL replacement part (MPN: 005211) is engineered specifically for the V60 series 60mm external wastegate. It is constructed from high-temperature reinforced silicone, ensuring the flexible seal remains responsive and durable under heavy thermal stress. Installing a fresh diaphragm is a standard part of wastegate maintenance to ensure your forced induction system operates at peak efficiency.

• Direct replacement for TiAL V60 60mm external wastegates
• High-temperature reinforced silicone construction for thermal resistance
• Restores consistent boost response and wastegate actuation
• Genuine TiAL Sport component (Part Number: 005211)

Fine-tune your TiAL QRJ recirculating blow-off valve with this authentic TiAL Sport 3 PSI replacement spring. This spring is designed specifically for the QRJ series, allowing you to match the valve's opening pressure to your engine's specific vacuum profile for optimal response.

Identified by its red color-coding, this spring is manufactured to exacting tolerances to ensure consistent performance and prevent boost leaks or premature venting. This component replaces a worn spring or allows for recalibration when changing camshafts or intake configurations.

• Spring Rate: 3 PSI
• Color Code: Red
• Application: TiAL Sport QRJ Series Blow Off Valves
• Manufacturer Part Number: 004729
• Note: This listing is for the internal spring only; flanges and BOV assembly are not included.

The TiAL Sport MVS 38mm external wastegate is a compact, high-performance solution for precise turbocharger boost control. Designed for tight engine bays, this V-band style wastegate offers a significantly smaller footprint than traditional flange-style units, standing only 3.7 inches tall. It is engineered to handle extreme exhaust temperatures while maintaining stable manifold pressure.

Constructed with a high-temperature NiCrFe based alloy valve and a 347 stainless steel valve housing, the MVS is built for longevity in demanding motorsport environments. For high-heat applications, it features integrated -4AN water cooling ports that cycle coolant through the actuator top to maintain diaphragm integrity, though these ports may be left unused if not required for your specific setup.

• Manufacturer Part Number: 003046
• Bore Diameter: 38mm
• Spring Pressure: 1.0 Bar (14.50 PSI)
• Material: 347 Stainless Steel Housing and NiCrFe Alloy Valve
• Cooling: Optional -4AN Water Cooling Ports
• Actuator Top: Black Anodized Aluminum
• Included Hardware: Two TiAL V-band clamps, two stainless steel V-band flanges, two -4AN water fittings, and two air fittings.

The TiAL Sport MV-I 2.5 Wastegate Actuator (MPN: 006667) is engineered for precise boost management in internally wastegated turbocharger systems. Designed for high-heat environments and demanding performance applications, this actuator provides the mechanical stability needed to maintain consistent boost pressure and prevent premature wastegate opening.

• Calibrated with an 18 PSI internal spring for reliable boost control
• Features a straight rod design for compatibility with specific turbocharger configurations
• Compact 2.5-inch diaphragm housing fits into tight engine bay clearances
• Durable black anodized finish for enhanced corrosion resistance and a clean aesthetic
• Genuine TiAL Sport engineering for superior diaphragm longevity and response

This unit serves as a robust upgrade or replacement for OE actuators, offering the increased spring tension required for tuned forced induction setups. Ensure rod length and orientation match your specific turbocharger housing requirements before installation.

The TiAL Sport MV-I 2.5 Wastegate Actuator delivers precise boost management for internal wastegate turbochargers. Designed to withstand the high-heat environment of the engine bay, this actuator provides the consistent pressure required to maintain stable boost levels and prevent premature valve opening.

This configuration features a pre-installed 18 PSI spring and a bent rod design, specifically engineered to accommodate tight packaging constraints or specific turbocharger housing geometries where a straight rod would interfere with other components. The black finish offers a professional, understated appearance while maintaining the high performance standards TiAL is known for.

• Manufacturer Part Number: 005472
• Series: MV-I 2.5
• Spring Rating: 18 PSI
• Rod Type: Bent Rod
• Finish: Black Anodized
• Application: Internal Wastegate Turbochargers

Fine-tune your TiAL Sport QRJ blow-off valve (BOV) response with this genuine replacement spring. Engineered specifically for the QRJ series, this 1.5 PSI spring allows for precise calibration of the valve's opening characteristics based on your engine's specific vacuum requirements at idle.

• Manufacturer Part Number: 004983
• Compatibility: TiAL QRJ Series BOV only
• Pressure Rating: 1.5 PSI
• Color Code: Black
• Material: High-quality spring steel for consistent tension and durability

Calibrate your turbocharger system for peak response with this genuine TiAL Sport replacement spring. Engineered specifically for the TiAL QR Blow Off Valve series, this 10 PSI spring (color-coded Black) ensures your valve opens and closes at the precise manifold vacuum levels required for your specific engine setup.

Proper spring selection is critical to preventing compressor surge and maintaining boost pressure. This 34mm spring is manufactured from high-tensile spring steel to resist fatigue and maintain consistent tension through extreme under-hood heat cycles. Whether you are replacing a worn component or tuning for a new vacuum profile, this genuine TiAL part provides the reliability and fitment only an original equipment manufacturer can offer.

• Manufacturer Part Number: 004939
• Pressure Rating: 10 PSI
• Color Code: Black
• Compatibility: TiAL QR Series Blow Off Valves (34mm)
• Material: High-tensile spring steel

This TiAL Sport replacement spring is engineered specifically for the QRJ series recirculating blow off valve. Designed to provide a precise 3 PSI tension, this spring allows enthusiasts to fine-tune their forced induction system's bypass response to match specific vacuum levels. The spring is finished in black for clear identification and manufactured to strict tolerances for consistent performance under pressure.

• Manufacturer Part Number: 004727
• Spring Rating: 3 PSI
• Series: TiAL Sport QRJ
• Finish: Black
• Note: Body and mounting flanges are not included

Fine-tune your forced induction system's response with this genuine TiAL Sport 12 PSI replacement spring. Designed for precision and durability, this "Red" coded spring allows you to calibrate your blow-off valve to your engine’s specific manifold vacuum at idle, ensuring the valve remains closed under vacuum while reacting instantly to throttle lift.

• Pressure Rating: 12 PSI (Red Color Code)
• Compatibility: Fits TiAL Q, QR, and original BV 50mm Blow-Off Valves
• Material: High-tensile spring steel for consistent seat pressure and long service life
• Installation: Direct replacement for the internal spring within the BOV actuator housing
• Manufacturer Part Number: 004030

Proper spring selection is critical to prevent both compressor surge and premature venting. This 12 PSI spring is specifically intended for setups requiring a higher vacuum threshold to maintain a proper seal at idle.

Optimize your turbocharger system’s relief pressure with this authentic TiAL Sport Q Series replacement spring. This 12 PSI spring is specifically color-coded purple for easy identification and is engineered to maintain the correct seat pressure in TiAL Q blow-off valves. Proper spring selection is essential for matching the valve’s opening characteristics to your engine’s manifold vacuum at idle, preventing boost leaks while ensuring rapid venting during throttle lift-off.

• Manufacturer Part Number: 004029
• Pressure Rating: 12 PSI
• Identification Color: Purple
• Compatibility: Designed specifically for TiAL Q series blow-off valves
• Material: Precision-wound high-tensile spring steel

Fine-tune your TiAL Sport Q or QR Series blow-off valve with this 12 PSI replacement spring. Selecting the correct spring tension is critical for maintaining a proper seal at idle while ensuring the valve opens reliably during vacuum transition. This spring is color-coded Black to signify its 12 PSI rating, designed for specific engine vacuum profiles to prevent boost leaks and optimize throttle response.

• Fits TiAL Sport Q and QR Series Blow Off Valves
• Pressure Rating: 12 PSI (Color-coded Black)
• Material: High-strength spring steel for consistent tension and durability
• Essential for matching BOV response to engine idle vacuum
• Manufacturer Part Number: 004028

Fine-tune your forced induction system with the TiAL Sport Q Series BOV 12 PSI replacement spring. This silver-coded spring is engineered to maintain the proper seal on your TiAL Q series blow-off valve, ensuring the piston remains closed until the designated vacuum threshold is met during deceleration.

• Spring Rate: 12 PSI
• Identification Color: Silver
• Application: TiAL Sport Q Series Blow Off Valves
• Material: High-tensile spring steel
• Manufacturer Part Number: 004026

Selecting the correct spring rate for your engine's specific vacuum profile is critical to preventing compressor surge and maintaining sharp throttle response. This genuine TiAL Sport replacement component is manufactured for consistent tension and long-term durability under high-heat engine bay conditions.

The TiAL Sport MVS external wastegate provides reliable boost control in a compact, 38mm V-band configuration. Engineered for high-performance turbocharged systems, the MVS is specifically designed to fit into tight engine bays while maintaining the flow characteristics required for stable manifold pressure.

This complete kit comes with all available springs, providing a wide range of boost configurations to suit your specific tuning requirements. The wastegate also features integrated water cooling ports to help maintain stable operating temperatures during high-load conditions. Every unit is finished in a durable red anodizing for corrosion resistance and engine bay aesthetics.

• Includes all boost springs for precise pressure tuning
• Compact actuator height for clearance in narrow spaces
• V-band inlet and outlet for secure, leak-free installation
• Integrated water cooling ports for thermal management
• Includes stainless steel V-band clamps and weld flanges
• Manufacturer Part Number: 002955

The TiAL Sport MVS (MV-S) 38mm external wastegate is engineered for high-performance turbocharged applications where engine bay space is limited. Standing just 3.7 inches tall, this compact wastegate offers superior boost control without the bulk of traditional units. It features integrated -4 AN water cooling ports to maintain stable temperatures during extreme track conditions, though water cooling is optional for standard use.

• High-temperature NiCrFe based alloy valve and 347 stainless steel valve housing for maximum heat resistance
• 6061-T6 aluminum actuator chassis with a durable purple anodized finish
• Includes a complete set of 17-7 PH stainless steel springs for customizable boost pressure settings
• V-band inlet and outlet connections provide a secure, leak-free seal and simplified installation
• Features two 1/8 inch NPT top air ports and two 1/8 inch NPT side air ports
• Manufacturer Part Number: 002954

Each MVS wastegate kit includes the valve assembly, two TiAL V-band clamps, two stainless steel V-band flanges, all available springs, and removable water fittings.

The TiAL Sport MVS (MV-S) 38mm external wastegate is engineered for high-performance turbocharged applications where engine bay space is limited. At only 3.7 inches in height, this compact wastegate provides superior boost control without the bulk of traditional units. The MVS features integrated water-cooling ports that allow for temperature management in extreme environments, though they can be left plugged if not required.

• High-Temp Construction: Features a high-temperature NiCrFe-based alloy valve and 347 stainless steel valve housing for maximum durability under high exhaust gas temperatures.
• Precise Boost Control: Comes with a complete set of 17-7 PH stainless steel actuator springs, allowing you to fine-tune your boost pressure exactly to your requirements.
• Secure Sealing: Utilizes Nitronic 60 stainless steel for the valve guide and valve seat to ensure long-term reliability and resistance to galling.
• Complete Kit: Includes the MVS assembly, all tuning springs, two TiAL V-band clamps, two TiAL V-band flanges, and all necessary air and water fittings.
• Manufacturer Part Number: 002953

The TiAL Sport MVS external wastegate is designed for high-performance turbocharged applications where space is at a premium. This compact 38mm V-band unit provides precise boost control and superior heat management. Constructed with a high-temperature NiCrFe based alloy for the valve housing and 347SS for the valve guide and seat, the MVS is built to withstand the rigors of extreme exhaust gas temperatures.

This kit is supplied with a complete set of springs, allowing you to configure your boost pressure to your exact requirements without the need for additional purchases. The MVS also features integrated water-cooling ports (removable if not required) to maintain actuator temperature stability in demanding racing environments.

• High-temperature NiCrFe based alloy valve housing for maximum durability
• 347SS valve guide and seat
• Includes all boost springs for versatile pressure settings
• Includes inlet and outlet V-band clamps and flanges
• Blue anodized 6061-T6 aluminum actuator housing
• Equipped with two -4AN water ports and two 1/8" NPT air ports
• Manufacturer Part Number: 002952