Fits 2013-2026 Subaru BRZ, Toyota 86/GR86, and Scion FR-S models.

The Whiteline KDT921 Rear Crossmember-Mount Bushing Kit is an essential upgrade for the ZN6/ZC6 and ZN8/ZD8 chassis, designed to eliminate the "lost motion" or over-compliance inherent in the factory rear crossmember bushings. Unlike traditional press-out replacements, these bushing inserts are engineered to work with the original OE bushings, providing a straightforward installation that significantly reduces crossmember movement and misalignment. This results in a more positive, connected feel from the rear end during high-load cornering and aggressive driving.

• Enhanced Precision: Minimizes rear crossmember shift for consistent suspension geometry.
• Advanced Materials: Formulated with high-grade synthetic elastomer resistant to oil, grease, ozone, and environmental weathering.
• Dual Protection: Features a combination of protective plating and powder coating on metal components to resist corrosion in harsh conditions.
• Self-Lubricating: Internal grease reservoirs provide constant lubrication to manage friction and prevent noise.
• Complete Kit: Includes molybdenum disulphide (LM) extreme pressure grease and a detailed installation guide.
• Manufacturer Part Number: KDT921

Fits 2004-2007 Subaru Impreza WRX STI.

The Whiteline BSR37Z 22mm heavy-duty rear sway bar is engineered to reduce body roll and spread lateral loads more evenly across the tires, effectively increasing cornering grip. This 3-point adjustable bar allows for precise fine-tuning of the vehicle's handling characteristics to suit specific driving conditions or driver preference without compromising ride comfort.

• Diameter: 22mm solid spring steel construction
• Adjustment: 3-point multi-point adjustment for dialed-in handling
• Bushings: Synthetic elastomer with internal bore knurling and grease retention lips for optimum lubrication and longevity
• Protection: Heavy-duty powder coating resists corrosion and harsh environmental conditions
• Stability: Includes DIY lateral locks to prevent sideways shifting of the bar under high cornering loads
• Hardware: High-quality mounting bushings and installation guide included
• Manufacturer Part Number: BSR37Z

Fits 2004-2007 Subaru Impreza WRX STI and WRX STI Limited.

The Whiteline BSK010 Sway Bar Kit is a comprehensive handling upgrade engineered to reduce body roll and optimize tire contact patches. By replacing the undersized OE bars with 22mm adjustable units, this kit allows drivers to fine-tune the handling balance of the GD-chassis STI for better turn-in and flatter cornering. This packaged solution includes everything needed for a complete suspension overhaul, including heavy-duty links and lateral locks.

• Front Sway Bar: 22mm diameter with 2-point adjustability.
• Rear Sway Bar: 22mm diameter with 3-point adjustability for precise oversteer/understeer tuning.
• End Links: Heavy-duty adjustable links with steel ball joints eliminate flex and improve response.
• Bushings: Synthetic elastomer bushings featuring internal bore knurling, grease retention lips, and PTFE lining for maintenance-free, low-friction operation.
• Lateral Locks: DIY locks prevent the sway bar from shifting sideways under heavy lateral loads.
• Durability: Forged ends for maximum structural integrity; finished in protective E-coat and powder coating for superior corrosion resistance.

MPN: BSK010

Fits select 2013-2026 Scion FR-S, Subaru BRZ, and Toyota 86/GR86.

The Whiteline BSF45Z 20mm 2-point adjustable heavy-duty sway bar is engineered to reduce body roll and improve lateral load distribution across your tires. By neutralizing sway and spreading cornering forces more evenly, this kit increases mechanical grip and sharpens turn-in response without compromising daily ride comfort. The 2-point adjustment allows drivers to fine-tune the handling balance to suit specific driving conditions or track layouts.

This comprehensive kit includes Whiteline's heavy-duty adjustable endlinks, which allow for up to 25mm of center-to-center length adjustment to eliminate sway bar preload on lowered vehicles. The included bushings are manufactured from a high-grade synthetic elastomer with internal bore knurling and grease retention lips for consistent lubrication and long-term durability.

• 20mm heavy-duty spring steel bar with forged ends for maximum strength
• 2-point adjustability for precise chassis tuning
• Includes heavy-duty endlinks with steel ball joints and 25mm of adjustment
• Synthetic elastomer bushings resistant to oil, grease, and ozone
• DIY lateral locks included to prevent bar shifting under high cornering loads
• Protective powder coating and plating for superior corrosion resistance
• Manufacturer Part Number: BSF45Z

Fits 1989-1993 Nissan Skyline R32 GT-R.

The Whiteline BNK009 Sway Bar Kit is a complete vehicle handling solution designed to reduce body roll and maximize mechanical grip. This engineered package replaces factory components with larger, adjustable bars to provide a flatter cornering attitude and more precise steering response. The kit features a 22mm front bar and a 24mm rear bar, both offering 2-point adjustability to allow for fine-tuning the vehicle's oversteer or understeer characteristics.

Whiteline bushings are manufactured from high-grade synthetic elastomer featuring internal bore knurling and grease retention lips. These internal reservoirs ensure the supplied molybdenum disulphide (LM) grease provides constant self-lubrication, preventing noise and maintaining smooth operation. Each component is finished in a heavy-duty powder coating for superior corrosion resistance and long-term durability in harsh environments.

• Front Sway Bar: 22mm diameter, 2-point adjustable
• Rear Sway Bar: 24mm diameter, 2-point adjustable
• Synthetic elastomer bushings with internal grease reservoirs
• Heavy-duty front and rear sway bar links included
• Includes molybdenum disulphide (LM) based grease for extended life
• Tough powder-coated finish resists corrosion
• Manufacturer Part Number: BNK009

Kit Contents: 2 Sway Bars, 4 End Links, 8 Bushings, 2 Bolts, and mounting hardware.

Fits 1993-1998 Nissan 240SX Base, LE, and SE models.

The Whiteline Front 22mm Heavy Duty Adjustable Sway Bar is engineered to reduce body roll and improve lateral load distribution across your tires. By minimizing sway during cornering, this upgrade increases mechanical grip and enhances overall handling precision without compromising ride quality or comfort. The 2-point adjustability allows you to fine-tune the suspension balance to suit your driving style and track conditions.

Constructed from high-grade materials for long-term reliability, this sway bar is a direct-fit replacement for the factory component. It comes complete with high-performance bushings to ensure immediate steering response and consistent performance under heavy cornering loads.

• Part Number: BNF27Z
• Diameter: 22mm
• Adjustment: 2-Point Adjustable
• Included: 1 Sway Bar, 2 Bushings
• Increases cornering grip and reduces body roll
• Bolt-on installation to factory mounting points

Fits 2004-2008 Acura TSX Base.

The Whiteline BHR80XZ 22mm heavy duty adjustable sway bar is engineered to reduce body roll and maximize the vehicle's cornering grip. By increasing the torsional stiffness of the rear suspension, this sway bar distributes lateral loads more evenly across the tires, significantly improving handling balance, safety, and steering response without compromising ride comfort.

The 3-point adjustable design allows for fine-tuning of the suspension's roll stiffness, letting you dial in the perfect handling characteristics for your driving style. Built with durable construction to withstand varied road conditions, this kit replaces the factory unit for a direct performance upgrade.

• 22mm diameter for increased roll stiffness
• 3-point adjustability for custom suspension tuning
• Reduces body roll and increases cornering grip
• Includes synthetic elastomer bushings for a complete installation
• Manufacturer Part Number: BHR80XZ

Kit Contains: 1 Sway Bar, 2 Bushings

Fits 1994-2001 Acura Integra GS, GS-R, LS, RS, Special Edition, and Type R models.

The Whiteline BHF53Z front sway bar is engineered to reduce body roll and sway by increasing the rate of the vehicle's suspension. This 24mm heavy-duty bar spreads lateral loads more evenly across all four tires, significantly improving cornering grip and overall handling performance without compromising ride quality or comfort. Featuring two points of adjustability, this bar allows drivers to fine-tune the handling balance to suit specific driving styles or track conditions.

• Replaces restrictive factory sway bar with a 24mm heavy-duty spring steel bar
• 2-point adjustability for precision handling calibration
• Reduces body roll for better lateral load distribution and increased grip
• Direct-fit bolt-on installation takes approximately 1 hour with basic tools
• Manufacturer Part Number: BHF53Z
• Backed by a 3-year / 60,000-mile warranty

Fits select 2005-2013 BMW 1 Series and 3 Series models (including 128i, 135i, 325i, 328i, 330i, and 335i variants).

The Whiteline BBR44 20mm fixed-position rear sway bar is engineered to 'Activate More Grip' by significantly reducing body roll. By spreading lateral loads more evenly across the tires, this bar increases cornering traction and improves outright handling performance without compromising ride quality or daily driving comfort. The bar is finished in a protective powder coating designed to withstand harsh road conditions and resist corrosion over the long term.

This kit features Whiteline's advanced synthetic elastomer mounting bushings, which utilize internal bore knurling and grease retention lips for consistent lubrication. To ensure the bar remains centered during high-load cornering, DIY lateral locks are included to prevent shifting. Each kit comes complete with molybdenum disulphide (LM) based grease for extended service life and friction management.

• Part Type: Rear Sway Bar
• Diameter: 20mm
• Adjustment: Fixed Position
• Finish: Heavy-duty powder coating
• Bushings: Synthetic elastomer with internal grease reservoirs
• Included Hardware: Lateral locks and molybdenum disulphide grease
• Manufacturer Part Number: BBR44

Fits select 2015-2021 Subaru WRX and WRX STI models. This Whiteline Grip Series Stage 1 Handling Kit (GS1-SUB007) is an engineered suspension solution designed to eliminate body roll, improve turn-in response, and provide a lowered stance without compromising daily ride quality. By replacing flexible factory components with precision-engineered hardware, this kit delivers a more connected feel during high-speed cornering and lane changes.

• Lowering Springs: Progressive rate springs provide a consistent 15mm drop front and rear. Front springs are rated at 6.1kg/mm (329lb/in) and rears at 5.8kg/mm (325lb/in).
• Adjustable Sway Bars: Features a 26mm 2-point adjustable front bar and a 22mm 3-point adjustable rear bar, allowing for fine-tuned chassis balance.
• High-Strength End Links: Heavy-duty steel ball joint links eliminate the flex of OE plastic/thin-walled units and allow for up to 25mm of on-car length adjustment to remove sway bar preload.
• Advanced Bushing Technology: Synthetic elastomer bushings feature internal bore knurling and grease retention lips to ensure long-term lubrication and silent operation.
• Complete Installation Hardware: Includes DIY lateral locks to prevent sway bar walking, forged ends for maximum strength, and extreme pressure molybdenum disulphide (LM) grease.

Each component is finished with protective plating or powder coating to resist corrosion in harsh environments. The kit is designed to work seamlessly with factory dampers and includes a detailed installation guide.

Fits 2015-2021 Subaru WRX STI (Base, Limited, Launch Edition, Series.HyperBlue, and Type RA).

The Whiteline BSK019 is a comprehensive suspension solution designed to drastically reduce body roll and increase cornering grip. This engineered kit replaces the factory bars with a 26mm 2-point adjustable front sway bar and a 22mm 3-point adjustable rear sway bar. By providing multiple mounting points, this kit allows you to fine-tune the vehicle's handling balance to suit your driving style or track conditions.

This package includes heavy-duty adjustable sway bar links featuring steel ball joint ends that eliminate the flex common in OE plastic or thin-wall steel links. These links allow for up to 25mm of on-car length adjustment to eliminate sway bar preload. The kit is finished with Whiteline’s signature synthetic elastomer bushings, featuring internal bore knurling and grease retention lips for consistent lubrication and noise-free operation.

• Front Sway Bar: 26mm 2-point adjustable heavy-duty spring steel
• Rear Sway Bar: 22mm 3-point adjustable heavy-duty spring steel
• Adjustable Links: Heavy-duty steel ball joints with up to 25mm length adjustment
• Bushings: Oil and ozone-resistant synthetic elastomer with internal knurling
• Lateral Locks: DIY locks included to prevent sideways bar migration
• Hardware: Includes molybdenum disulphide (LM) grease and installation guide
• Finish: Protective powder coating and anodized alloy for superior corrosion resistance
• Part Number: BSK019

The Whiteline BSK015 Front and Rear Sway Bar Kit is a comprehensive handling solution designed to "Activate More Grip" by significantly reducing body roll and improving chassis balance. Fits select 2010-2014 Subaru Legacy models (2.5GT, 2.5i, and 3.6R).

This kit replaces the flexible factory components with high-rigidity, adjustable sway bars, allowing you to fine-tune your vehicle's handling characteristics for better turn-in and flatter cornering. The 24mm front bar features 2-point adjustment, while the 22mm rear bar offers 3-point adjustment to suit your driving style. Constructed with forged ends for maximum strength, the bars are protected by a durable powder coating designed to resist corrosion in harsh environments.

Whiteline includes heavy-duty end links and synthetic elastomer bushings featuring internal bore knurling and grease retention lips. These components eliminate the deflection common in OE rubber bushings, ensuring the sway bar responds immediately to lateral loads. The kit also includes DIY lateral locks to prevent the bars from shifting during hard cornering.

• Manufacturer Part Number: BSK015
• Front Sway Bar: 24mm 2-point adjustable
• Rear Sway Bar: 22mm 3-point adjustable
• Heavy-duty links with steel ball joints and 25mm on-car adjustment
• Synthetic elastomer bushings resistant to oil, grease, and ozone
• Forged ends for superior mounting point strength
• Includes DIY lateral locks and molybdenum disulphide (LM) grease
• Protective plating and powder coating for long-term durability

Fits select 2005-2009 Subaru Legacy and Outback models. This Whiteline Front and Rear Sway Bar Kit is a comprehensive suspension upgrade designed to significantly reduce body roll and improve cornering grip by distributing lateral loads more evenly across the tires.

The kit features a 22mm 2-point adjustable front bar and a 20mm 2-point adjustable rear bar, allowing for fine-tuned suspension stiffness without compromising ride quality. The included heavy-duty end links eliminate the flex found in OE components, providing immediate steering response and increased rigidity during rapid lane changes. The system utilizes Whiteline's proprietary synthetic elastomer bushings with internal bore knurling and PTFE lining, which eliminates the need for periodic lubrication while resisting oil and ozone weathering.

• Front Sway Bar: 22mm heavy-duty spring steel, 2-point adjustable
• Rear Sway Bar: 20mm heavy-duty spring steel, 2-point adjustable
• Bushings: Synthetic elastomer with PTFE lining for low-friction operation
• End Links: Adjustable heavy-duty ball joint links (up to 25mm adjustment)
• Lateral Locks: DIY lateral locks prevent sideways bar movement under load
• Finish: Protective plating and powder coating for superior corrosion resistance
• Hardware: Includes 4 links, 4 bushings, 2 lateral locks, and 16 washers
• MPN: BSK014
• Warranty: 3-year / 60,000-mile manufacturer warranty

Fits 1973-1982 Chevrolet Corvette models including Base, Stingray, and special editions.

Restore chassis stability and correct body alignment in your classic C3 with the Whiteline Body Mount Bushing Set. Over time, factory rubber mounts perish and compress, leading to excessive body movement, rattles, and poor panel alignment. These replacement bushings are engineered to swap directly for worn OE components, providing a more stable and durable connection between the body and frame.

• Direct replacement for perished or soft factory body mounts
• Reduces body-to-chassis movement to help maintain proper body alignment
• Includes extreme pressure molybdenum disulphide (LM) based grease for extended service life
• Designed for long-term durability in specialty automotive applications
• Manufacturer Part Number: W93554

Vehicle Fitment:

Fits 1990-1998 Toyota Land Cruiser and Lexus LX450/LX470 models.

The Whiteline Plus W83050 Front Adjustable Panhard Rod Kit is engineered to correct and optimize the lateral location of the front axle on vehicles with modified suspension. When a vehicle is lifted or lowered, the fixed length of the factory panhard rod pulls the axle out of alignment; this adjustable replacement allows you to center the axle precisely, restoring proper geometry and predictable handling.

• Axle Alignment: Essential for centering the front axle after lifting or lowering to maintain vehicle tracking.
• Corrosion Protection: Heavy-duty powder coating provides a durable skin that is significantly tougher than conventional paint for long-term resistance to harsh road conditions.
• Self-Lubricating Bushings: Designed with internal grease reservoirs for continuous lubrication and optimal friction management.
• Included Hardware: Supplied with extreme pressure molybdenum disulphide (LM) based grease to ensure extended component life and quiet operation.
• Manufacturer Part Number: W83050

Fits 1990-2005 Mazda Miata (NA/NB) across all submodels, including Base, LS, SE, and Mazdaspeed models.

If you are experiencing uneven tire wear, unstable braking, or unpredictable rear-end behavior during cornering, your factory control arm bushings have likely failed or fatigued. The Whiteline WEK099 Signature Black bushing kit is an essential servicing solution designed to replace worn OE units and restore chassis geometry. These bushings are engineered from a high-performance synthetic elastomer that provides superior abrasion resistance and high load-bearing capability while remaining flexible enough for street and track use.

• Replaces worn factory bushings to restore handling and alignment stability
• Formulated for high resistance to oil, grease, ozone, and environmental weathering
• High tensile strength and load-bearing capacity for consistent performance
• Signature black finish for a professional, understated appearance
• Includes detailed installation guide for a straightforward service
• Manufacturer Part Number: WEK099

The Whiteline W93511 Universal Pivot Bushing Kit is an essential service component for leaf-sprung vehicles subjected to heavy loads and high-mileage use. Over time, factory rubber bushings degrade, leading to excessive play and unstable handling. This kit replaces those worn components with high-performance Nolathane bushings, specifically engineered for the high load-bearing requirements of 4WDs, utility vehicles, and towing applications.

Constructed for maximum durability, these bushings offer superior abrasion resistance and increased tensile strength compared to standard rubber. The material is chemically resistant to oil, grease, ozone, and weathering, ensuring consistent stability and a longer service life in harsh environments. By maintaining correct suspension geometry, this kit also helps reduce unwanted noise and vibration for a more controlled ride.

• Engineered fit supports consistent stability and handling performance
• High-tensile Nolathane material resists wear, oil, and chemical exposure
• Reduces noise, vibration, and harshness (NVH)
• Designed for heavy-duty 4WD, ute, and towing service
• Manufacturer Part Number: W93511
• Kit Includes: 4 Bushings and 2 Tubes

Fits 2003-2009 Nissan 350Z and 2003-2007 Infiniti G35.

The Whiteline Plus Traction Control Rear Cradle Bushing Kit replaces the high-compliance factory bushings in the rear subframe to dramatically reduce rear cross-member misalignment and movement. By securing the cradle, this kit provides a more positive feel and maintains consistent suspension geometry during cornering and heavy acceleration. This synthetic elastomer formulation is engineered for motorsport and high-performance street applications, offering superior resistance to oil, grease, ozone, and weathering.

Built for longevity, these bushings feature internal grease reservoirs for continuous self-lubrication and friction management. All metal components are treated with protective plating and powder coating to resist corrosion in the harshest environments.

• Replaces worn OE rear subframe bushings to eliminate cradle shift
• Advanced synthetic elastomer material provides long-term durability and performance
• Internal grease reservoirs for self-lubrication and quiet operation
• Protective plating and powder coating for maximum corrosion resistance
• Supplied with extreme pressure molybdenum disulphide (LM) grease
• Detailed installation guide included
• Manufacturer Part Number: W92994

Fits 2005-2021 Nissan Frontier (Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV, and XE).

The front eye bushing of a leaf spring is a critical service point that often fails due to heavy loads, high mileage, and environmental exposure. The Whiteline W73831 kit replaces these soft factory rubber bushings with a high-performance synthetic elastomer designed to maintain axle alignment and vehicle stability. This kit is specifically engineered for 4WDs and vehicles used for towing or heavy hauling, offering superior abrasion resistance and high load-bearing capacity.

By swapping out worn OE bushings for this engineered set, you reduce uncommanded suspension movement and vibration while extending the service life of your leaf spring assembly. The included greaseable pins allow for easy maintenance to ensure smooth, quiet operation over the long term.

• MPN: W73831
• Material: Signature black synthetic elastomer resistant to oil, grease, ozone, and weathering
• Performance: Increases tensile strength and stability under heavy loads
• Installation: Direct replacement for factory front eye bushings
• Kit Includes: 4 Bushings, 2 Internal Tubes, and 2 Greaseable Pins

Fits select 1999-2018 Chevrolet Silverado/GMC Sierra 1500, 2500, 3500, and 2002-2006 Avalanche 2500. This all-in-one leaf spring bushing service kit is designed to replace factory rubber bushings that have degraded due to high mileage, heavy loading, or constant towing.

Whiteline's signature black synthetic elastomer bushings are engineered for extreme durability and abrasion resistance. Unlike standard rubber, these bushings maintain their geometry under high load-bearing conditions, making them ideal for work trucks, 4WD applications, and frequent towing. The advanced formulation resists breakdown from oil, grease, ozone, and harsh environmental weathering.

• Complete service kit includes bushings for front eyes, rear eyes, and shackles
• Synthetic elastomer construction offers high tensile strength and load-bearing capability
• Improves suspension stability and maintains alignment under stress
• Direct replacement for worn OE components
• Chemically resistant to oil, grease, and contaminants
• Manufacturer Part Number: W73821

Fits 1980-1997 Ford F-250 and F-350.

The Whiteline W73815 Leaf Spring Eye and Shackle Bushing Kit is a critical service solution for heavy-duty leaf-sprung vehicles. Over time, high mileage and heavy payload demands cause factory rubber bushings to compress and perish, leading to suspension slop and poor handling. These signature red synthetic elastomer bushings are engineered to provide outstanding abrasion resistance and high load-bearing capability, making them ideal for towing, 4WD applications, and work trucks.

Built to withstand harsh environments, these bushings offer increased tensile strength and are chemically resistant to oil, grease, ozone, and weathering. This kit restores chassis precision and ensures your leaf springs operate with the necessary flexibility without the premature failure associated with OE rubber.

• Replaces worn factory leaf spring eye (front and rear) and shackle bushings
• High load-bearing synthetic elastomer construction
• Superior resistance to chemicals, oil, and atmospheric weathering
• Includes extreme pressure molybdenum disulphide (LM) grease for extended service life
• Manufacturer Part Number: W73815

Fits 1986-1995 Suzuki Samurai models including Base, JA, JL, JS, JX, and JX SE.

Refresh your front suspension with the Whiteline W73475 leaf spring bushing kit. This all-in-one service solution replaces worn factory rubber bushings in both the front and rear eyes of the front leaf springs, as well as the shackle bushings. Engineered to withstand high mileage and heavy load-carrying demands, these signature black bushings provide superior durability and suspension control compared to original equipment rubber.

The specialized synthetic elastomer construction offers outstanding abrasion resistance and high load-bearing capability, making it ideal for 4WD applications, towing, and utility use. The material is formulated for high tensile strength and remains flexible while resisting oil, grease, ozone, and weathering for long-term performance in harsh environments.

• Complete kit for front leaf spring eyes and shackles
• Replaces soft, perished, or worn OE rubber components
• High load-bearing capacity for off-road and towing use
• Resistant to chemicals, oils, and environmental degradation
• Includes extreme pressure molybdenum disulphide (LM) based grease
• Manufacturer Part Number: W73475

Fits select 2009-2026 Subaru, Toyota, and Scion models including BRZ, WRX, GR86, Forester, Legacy, and Outback.

The Whiteline Rear Trailing Arm Lower Rear Bushing Kit (W63582) is engineered to optimize rear suspension geometry by replacing compliant or worn factory bushings. These bushings provide superior dynamic alignment precision by controlling excessive trailing arm movement, resulting in more predictable handling and increased driver confidence under load. This kit is a direct replacement for the lower rear bushing on the rear trailing arm, correcting alignment instability caused by OE rubber deflection.

• Advanced Material: Proprietary synthetic elastomer formulation resists oil, grease, ozone, and weathering.
• Corrosion Protection: Metal components feature protective plating designed to withstand harsh road conditions better than traditional paint.
• Lubrication Design: Internal grease reservoirs provide continual self-lubrication for consistent friction management.
• NVH Control: Precisely placed dampening voids mitigate harshness from road inputs while maintaining mechanical precision.
• Installation Ready: Includes extreme pressure molybdenum disulphide (LM) based grease and detailed instructions.
• Part Number: W63582

Fits select 1984-1998 Nissan 240SX and 300ZX.

Worn front control arm bushings have a significant impact on vehicle stability, steering feedback, and braking efficiency. The Whiteline Plus W53467 Front Control Arm Lower Inner Bushing Kit replaces soft or failed OE components with high-performance synthetic elastomer. This material provides superior elasticity, memory, and outright durability for both spirited street driving and track applications.

• Engineered with internal grease reservoirs for continuous self-lubrication and friction management.
• Synthetic elastomer formulation is resistant to oil, grease, ozone, and environmental weathering.
• Protective plating and powder coating on metal components provide a hard skin for superior corrosion resistance.
• Specially bonded design for optimized strength in high-load bearing applications.
• Includes extreme pressure molybdenum disulphide (LM) based grease and a detailed installation guide.

Compatibility Table:

Fits 1965-1982 Chevrolet Corvette including Stingray, Collector's Edition, and Indianapolis 500 Pace Car models.

Restore suspension precision and sharpen handling with Whiteline sway bar link bushings. While small, these bushings play a critical role in the effectiveness of your anti-roll system. Over time, original rubber bushings perish and soften, leading to increased body roll and vague steering response. Whiteline's high-performance synthetic elastomer formulation is engineered to maintain its shape under heavy cornering loads, ensuring your sway bar engages immediately.

• Direct replacement for worn or deteriorated factory link bushings
• Provides a more positive connection for improved vehicle handling behavior
• Includes extreme pressure molybdenum disulphide (LM) based grease for quiet operation and extended life
• Resistant to oils, road salt, and environmental debris
• Manufacturer Part Number: W23837

Fits 2005-2023 Chrysler 300, 2008-2023 Dodge Challenger, 2006-2023 Dodge Charger, and 2005-2008 Dodge Magnum.

Restore suspension performance and eliminate front-end noise with the Whiteline Front Sway Bar Link Kit (W23760). Factory end links often fail due to worn ball joints, over-compliant bushings, or bent center bodies, resulting in a distinct "knocking" sound and sluggish steering response. This kit replaces those fatigued components with high-durability links designed to maintain optimal sway bar geometry and stability.

By minimizing play in the link connection, this kit ensures that anti-roll bar loads are distributed more effectively across the chassis. This reduction in bushing compliance helps minimize body roll during cornering, providing a more confident and predictable driving experience under varied road conditions.

• Enhanced Durability: Engineered to outperform and outlast OE links, even under the stress of performance driving.
• Handling Precision: Reduces suspension deflection to ensure immediate sway bar engagement.
• Direct Fitment: Bolts directly to factory mounting points for a reliable service replacement or performance upgrade.
• Complete Set: Includes two (2) front sway bar links for a full axle refresh.
• Manufacturer Part Number: W23760

Fits select 2000-2009 Subaru Legacy, Outback, Impreza, WRX, STI, Baja, and 2005-2006 Saab 9-2X models.

Replace worn factory rubber with Whiteline rear sway bar mount bushings to improve chassis response and handling consistency. These bushings utilize Whiteline's advanced synthetic elastomer formulation, specifically engineered to resist oil, grease, ozone, and harsh weathering while maintaining its physical properties over time.

A standout feature of this kit is the PTFE inner lining, which provides an exceptionally low coefficient of friction. This design eliminates the need for external lubrication during installation, providing a "grease-free" solution that remains silent and smooth. Internal grease reservoirs are integrated into the design to provide continual self-lubrication for maximum friction management throughout the life of the part.

• Part Number: W0406-20
• Material: Proprietary synthetic elastomer
• Lining: PTFE low-friction inner lining
• Installation: Grease-free design with internal reservoirs
• Durability: Resistant to ozone, oil, and grease
• Includes: Bushing set and detailed installation guide

Fits 2006-2011 Honda Civic (DX, EX, EX-L, GX, Hybrid, Hybrid-L, LX, LX-S, MUGEN Si, and Si).

Replacing worn bushings and ball joints in factory suspension arms is often a labor-intensive process that requires specialized press tools and carries the risk of damaging the original arm. Whiteline solves this by offering a complete Front Lower Control Arm Assembly (KTA366), providing a bolt-on solution that eliminates the need for pressing out old components. These arms come pre-installed with market-leading Whiteline synthetic elastomer bushings, engineered to deliver consistent alignment geometry and improved steering response under a variety of driving conditions.

• Direct replacement for factory front lower control arms
• Equipped with high-performance synthetic elastomer bushings for durability and precision
• Durable construction ensures long-term reliability and predictable handling
• Eliminates the risk of arm damage associated with bushing replacement
• Kit includes: 2 Control Arm Assemblies
• Manufacturer Part Number: KTA366

Fits select 2015-2026 Toyota Corolla, GR Corolla, Prius, RAV4, C-HR, Yaris and Lexus ES, NX, and UX.

The Whiteline KTA305 Rear Upper Control Arm kit is a heavy-duty suspension solution designed to provide precise on-car camber adjustment. For vehicles with altered ride heights or performance-oriented setups, these arms allow technicians to dial in the exact alignment needed to maximize the tire contact patch. By correcting camber, this kit improves cornering grip, provides more predictable handling, and significantly extends tire life by preventing uneven wear.

• Provides on-car adjustability for fast and accurate camber alignment
• Heavy-duty construction designed for high-load performance applications
• Improves overall traction and lateral grip during cornering
• Direct replacement for factory rear upper control arms
• Manufacturer Part Number: KTA305
• Kit Includes: Two (2) adjustable control arms

Fits 2011-2014 Subaru Impreza WRX and WRX STI models, including Limited and Premium trims.

Upgrade your front suspension with the Whiteline KTA291 Front Lower Control Arm Kit. These arms are manufactured from high-quality alloy to provide a significant reduction in unsprung weight compared to factory steel units, resulting in improved suspension response. Beyond weight savings, Whiteline has engineered these arms with optimized geometry, providing a +0.5° camber gain and improved caster to maximize the tire contact patch and enhance directional stability during spirited street or track driving.

This kit features a high-performance hybrid bushing design: the rear mount utilizes a synthetic elastomer formulation bonded to a high-quality sealed bearing assembly for smooth, bind-free articulation. The front bushing is equipped with an oversized heavy-duty crush tube to minimize deflection. Together, these components virtually eliminate dynamic toe-change during heavy cornering for precise turn-in and a more communicative steering feel.

• High-quality alloy construction significantly reduces unsprung weight
• Pre-installed synthetic elastomer bushings with sealed bearing assemblies
• Engineered geometry providing +0.5° camber gain and optimized caster
• Improves steering precision and reduces dynamic toe-change during cornering
• Includes two (2) complete arms and molybdenum disulphide (LM) grease
• Manufacturer Part Number: KTA291
• Backed by a 3-year / 60,000-mile warranty