The DEI Exhaust Wrap Kit (MPN 10112) is a comprehensive solution for insulating headers or motorcycle pipes to manage radiant heat. This kit includes two 50-foot rolls of 2-inch wide tan exhaust wrap, engineered to handle the extreme temperatures generated by high-performance exhaust systems. By containing heat within the pipes, this wrap helps significantly lower under-hood temperatures and protects sensitive engine bay components from thermal damage.

To ensure a long-lasting finish, the kit includes an aerosol can of Aluminum HT Silicone Coating. This spray seals the wrap material, protecting it from moisture, oil, road grime, and abrasions while providing a professional metallic appearance. For secure mounting, the kit provides 12 stainless steel locking ties and a specialized installation tool to ensure the wrap remains tight and stationary through thousands of heat cycles.

• Two 2 in. x 50 ft. rolls of Tan Exhaust Wrap
• One aerosol can of Aluminum HT Silicone Coating spray
• Eight 8 in. Stainless Steel Locking Ties
• Four 14 in. Stainless Steel Locking Ties
• Free Locking Tie Tool included for secure installation
• Includes installation instructions and hazardous materials info sheet
• Packaged in a retail clamshell
• Manufacturer Part Number: 10112

Manage under-hood thermal energy with the Mishimoto Exhaust Heat Wrap. Designed to insulate headers, downpipes, and exhaust manifolds, this wrap significantly reduces radiant heat to protect sensitive engine components and lower intake air temperatures. By containing heat within the exhaust system, it also helps maintain higher exhaust gas velocities for improved scavenging.

• Includes 2 in x 35 ft roll of exhaust heat wrap
• Handles direct heat up to 1800°F (982°C) and radiant heat up to 2800°F (1538°C)
• Comes with corrosion-resistant stainless steel locking ties for secure installation
• Helps reduce engine bay temperatures and prevent heat soak
• Manufacturer Part Number: MMTW-235

The 35-foot length provides ample coverage for typical 4-cylinder headers or partial coverage for V8 manifolds and downpipes. The included stainless steel ties ensure the wrap remains tightly secured under high-vibration and high-heat conditions.

DEI Glass Fiber Exhaust Wrap (10137) is engineered to mitigate extreme underhood temperatures and optimize exhaust scavenging. By insulating headers and downpipes, this 2-inch wide wrap retains heat within the exhaust system, decreasing gas density and increasing flow velocity for improved performance. Reducing radiant heat effectively lowers intake air temperatures and protects sensitive engine components from thermal fatigue.

This tan wrap features integrated installation guide lines to ensure even overlapping for a professional finish. For maximum durability and protection against road grime or fluid spills, it is highly recommended to seal the wrap with DEI HT Silicone Coating spray after installation.

• Dimensions: 2in x 25ft
• Direct Heat Resistance: 1200°F
• Radiant Heat Resistance: 2000°F
• Reduces underhood temperatures by approximately 50%
• Includes integrated installation guide lines
• Manufacturer Part Number: 10137

Note: Wrapping catalytic converters or flex-pipes is not recommended. Exhaust wrap is not designed to be moved or removed once it has been heat-cycled, as the glass fibers lose their initial flexibility.

The Torque Solution Universal Volcanic Rock Exhaust Wrap (TS-EW-2X50L) is engineered to manage extreme thermal energy by insulating headers, downpipes, and exhaust tubing. Unlike standard fiberglass wraps, this volcanic rock (basalt) filament wrap is more durable, handles higher temperature spikes, and remains pliable even after heat cycling, preventing the brittleness common with lesser materials.

• Reduces radiant engine bay temperatures to protect wiring, hoses, and sensitive electronic components.
• Improves exhaust gas velocity and scavenging by keeping heat inside the primary tubes.
• High-tensile basalt fiber construction resists vibration breakdown and chemical spills.
• Dimensions: 2 inches wide by 50 feet long for comprehensive coverage.
• Universal application suitable for automotive, motorcycle, and marine exhaust systems.
• Manufacturer Part Number: TS-EW-2X50L

By maintaining higher exhaust gas temperatures, this wrap helps increase the efficiency of the exhaust system while significantly lowering under-hood heat soak.

Maintain optimal engine bay temperatures and protect nearby components with the Torque Solution Volcanic Rock Exhaust Wrap. Engineered from crushed volcanic rock (basalt) fiber, this 2-inch wide by 100-foot long wrap provides exceptional thermal insulation for headers, downpipes, and manifolds.

Unlike standard fiberglass wraps, volcanic rock filament is naturally resistant to high-heat breakdown and remains flexible even after extreme thermal cycling. By containing heat within the exhaust pipes, it improves exhaust scavenging and protects wire harnesses, hoses, and plastic components from radiant heat damage. This universal wrap is ideal for any automotive, motorcycle, or marine application requiring heavy-duty heat management.

• High-performance volcanic rock (basalt) fiber construction
• Superior heat resistance compared to traditional fiberglass
• Roll Dimensions: 2 in. x 100 ft.
• Universal application for all exhaust tubing
• Increases exhaust gas velocity and improves scavenging
• Resists chemicals, oil spills, and vibration
• Manufacturer Part Number: TS-EW-2X100L

Control under-hood temperatures and protect sensitive engine components with the Torque Solution Volcanic Rock Exhaust Wrap. This universal wrap is engineered from crushed volcanic rock (basalt fiber), providing superior thermal insulation and durability compared to traditional fiberglass wraps. By keeping exhaust gases hotter inside the pipes, it helps maintain higher gas velocity and improves scavenging efficiency while shielding the engine bay from radiant heat soak.

The 1-inch width is specifically chosen for wrapping tight radiuses and complex bends on headers, downpipes, or motorcycle exhaust pipes where wider wraps would be difficult to manage. This 50-foot roll provides sufficient coverage for various high-performance automotive and powersports applications.

• Material: High-temperature volcanic rock (basalt fiber)
• Dimensions: 1" wide x 50' long
• Reduces engine bay heat soak and protects nearby components
• Improves exhaust gas scavenging by retaining internal heat
• Universal fitment for headers, manifolds, and exhaust tubing
• Manufacturer Part Number: TS-EW-1X50L

Lower under-hood temperatures and improve exhaust scavenging with the Torque Solution Fiberglass Exhaust Wrap. This universal wrap is engineered to insulate headers, downpipes, and exhaust tubing, containing heat within the system to increase exhaust gas velocity. Reducing radiant heat effectively protects sensitive engine components, wiring harnesses, and hoses from premature failure due to heat soak.

Constructed from high-temperature fiberglass, this 1-inch wide wrap is flexible enough to tightly follow the contours of complex tube geometries and sharp bends. The black finish provides a clean, professional look for performance and street applications.

• Manufacturer Part Number: TS-EW-1X50BK
• Material: High-temperature fiberglass
• Dimensions: 1 inch wide x 50 feet long
• Color: Black
• Fitment: Universal application for all exhaust systems

The Mishimoto Stainless Steel Locking Ties set provides a professional, high-temperature solution for securing exhaust heat wrap and thermal barriers. Engineered from high-grade stainless steel, these ties are designed to withstand extreme engine bay heat that would melt or degrade standard nylon zip ties, ensuring your insulation remains permanent and secure.

• High-grade stainless steel construction resists extreme heat and corrosion
• Self-locking mechanism for a fast, secure, and permanent installation
• Ideal for securing exhaust wrap, turbo blankets, and wiring heat sleeves
• Set includes (6) 6-inch ties and (2) 14-inch ties for versatile fitment
• Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMTW-TIES

Manage under-hood temperatures and improve exhaust scavenging with DEI Titanium Exhaust Wrap. Featuring proprietary LR Technology, this wrap is constructed from pulverized lava rock, extruded into fibers, and woven into a high-strength material. It is engineered to be more durable and pliable than standard fiberglass wraps, ensuring a tighter, more secure fit on headers and exhaust pipes.

Unlike traditional wraps, DEI Titanium does not require pre-wetting for installation or a silicone coating for finish. It withstands extreme thermal environments while resisting abrasion, chemical spills, and vibration-induced breakdown. Its unique construction provides a professional, high-tech carbon fiber appearance that maintains its integrity under harsh conditions.

• Temperature Resistance: Withstands 1800°F direct heat and 2500°F intermittent heat.
• Dimensions: 1 inch width x 100 foot length.
• Material: Pulverized lava rock fiber (LR Technology).
• Installation: No pre-wetting or HT Silicone Coating required.
• Part Number: 10133

Note: Wrapping catalytic converters is not recommended as it may cause overheating and reduce the unit's lifespan. Do not use on titanium exhaust systems, as these thin alloys are designed to dissipate heat quickly and may become brittle if wrapped. Avoid wrapping flex-pipes or joints. This material is not intended to be moved or removed after it has been heat-cycled.

DEI Titanium Exhaust Wrap with LR Technology is engineered from pulverized lava rock, stranded into a fiber and woven into a proprietary material designed for maximum thermal performance. This wrap manages extreme underhood temperatures to protect sensitive components and improve exhaust scavenging by maintaining high header gas velocities. Suitable for high-performance automotive and motorcycle applications.

This 2in x 35ft roll (MPN 10132) is significantly more pliable than standard fiberglass wraps, allowing for a tighter, more secure installation without the need for pre-wetting or specialized silicone coatings. It features a high resistance to abrasions, oil spills, and vibration-induced breakdown while providing a professional, high-tech carbon fiber appearance.

• Temperature Rating: Withstands 1800°F direct / 2500°F intermittent heat
• Material: Pulverized lava rock fiber with LR Technology
• Installation: Extremely pliable; no pre-wetting or silicone coating required
• Durability: High resistance to vibration, abrasions, and chemical spills
• Dimensions: 2in width x 35ft length
• Manufacturer Part Number: 10132

Installation Notes: Wrapping catalytic converters is not recommended due to overheating risks. Do not use on titanium exhaust systems, as the heat retention can make thin titanium alloys brittle and prone to cracking. Avoid wrapping flex-pipes or joints. Once heat-cycled, the fibers lose flexibility and are not intended to be moved or removed.

DEI Titanium Exhaust Wrap is the original thermal management solution engineered for extreme environments. Utilizing LR Technology, this wrap is constructed from pulverized lava rock stranded into a fiber material and woven into a proprietary high-durability weave. Designed to be stronger and more resilient than standard fiberglass wraps, it provides superior thermal performance for automotive and motorcycle applications while offering a high-tech carbon fiber aesthetic.

• Dimensions: 2in x 25ft
• Direct Heat Resistance: 1800°F (982°C)
• Intermittent Heat Resistance: 2500°F (1371°C)
• Material: Pulverized lava rock fiber
• Increases exhaust scavenge flow for improved performance
• Reduces engine bay temperatures and vibration breakdown
• Highly resistant to abrasions, chemicals, and oil spills
• Extremely pliable for a tight, secure wrap without pre-wetting
• No DEI HT Silicone Coating required for installation
• Manufacturer Part Number: 10131

Important Installation Notes: Wrapping catalytic converters is not recommended as it can lead to overheating and reduced component life. Do not wrap exhaust systems made of titanium, as the heat retention can cause the thin alloys to become brittle and crack. This wrap is not intended for use on flex-pipes or flex-joints, as the fibers lose their initial flexibility after being heat cycled.

Manage under-hood temperatures and improve exhaust scavenging with the original DEI Titanium Exhaust Wrap. Engineered with LR Technology, this wrap is manufactured from pulverized lava rock, stranded into a fiber material, and woven into a proprietary pattern. This construction is more durable and pliable than standard fiberglass wraps, providing a tight, secure fit for automotive and motorcycle headers or downpipes.

• Heat Resistance: Withstands 1800°F direct and 2500°F intermittent heat.
• Installation: Extremely pliable material does not require pre-wetting or DEI HT Silicone Coating.
• Durability: High resistance to abrasions, oil spills, and vibration-induced breakdown.
• Finish: High-tech carbon fiber look that maintains its integrity over time.
• Dimensions: 2 inches wide by 100 feet long.
• MPN: 10130

Installation Notes: Wrapping catalytic converters is not recommended as it may lead to overheating and reduced service life. Due to the high heat retention of titanium alloys, this wrap should not be applied to titanium exhaust systems. Note that the fibers lose flexibility after heat cycling and are not designed to be moved or removed once installed; avoid wrapping flex-pipes or joints.

DEI Titanium Exhaust Wrap is engineered from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave for maximum thermal protection. This 2-inch by 15-foot roll utilizes LR Technology to withstand higher temperatures than standard fiberglass wraps, helping to reduce under-hood temperatures while increasing exhaust scavenging for improved performance.

Designed for professional-grade durability, this wrap is extremely pliable, allowing for a tight, secure fit without the need to pre-wet the roll. It resists abrasions, oil spills, and vibration-induced breakdown, and does not require an additional silicone coating for protection. The finished installation provides a high-tech carbon fiber appearance.

• Heat Resistance: Withstands 1800°F direct / 2500°F intermittent heat
• Construction: Pulverized lava rock fiber with LR Technology
• Dimensions: 2in x 15ft
• Maintenance: No pre-wetting or silicone coating required
• Manufacturer Part Number: 10129

Note: Not recommended for wrapping catalytic converters or flex-pipes. After heat-cycling, the fibers will lose flexibility; do not attempt to move or remove the wrap once cured. Warning: Do not use on titanium exhaust systems, as they are designed to dissipate heat quickly and wrapping may cause the alloy to become brittle.

Manage under-hood temperatures and improve exhaust scavenging with DEI Titanium Exhaust Wrap with LR Technology. Engineered from pulverized lava rock stranded into a high-temperature fiber, this proprietary weave is significantly more durable than standard glass fiber wraps. It is designed to withstand extreme thermal environments, handling up to 1800°F of direct heat and 2500°F of intermittent heat.

This wrap is exceptionally pliable, allowing for a tight, secure fit on headers and downpipes without the need to pre-wet the roll. It also eliminates the requirement for HT Silicone Coating, maintaining a high-tech carbon fiber appearance while resisting abrasions, oil spills, and vibration-induced breakdown. By retaining heat within the exhaust system, it promotes increased flow and protects sensitive engine components from radiant heat damage.

• Dimensions: 1 inch wide x 15 feet long
• Temperature Resistance: 1800°F direct / 2500°F intermittent
• Material: Pulverized lava rock fiber (Titanium™)
• Installation: No pre-wetting or silicone coating required
• Manufacturer Part Number: 10128

Note: Do not use on titanium exhaust systems or wrap catalytic converters. Not recommended for use on flex-pipes or joints. The material becomes brittle after heat cycling and is not designed to be moved or removed once installed.

DEI Titanium Exhaust Wrap with LR Technology is engineered from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. This advanced construction is designed to be stronger and more durable than standard fiberglass wraps, offering superior thermal performance and reliability for automotive or motorcycle exhaust systems. By retaining heat within the pipes, this wrap reduces engine bay temperatures and promotes increased exhaust flow for improved performance.

• Direct Heat Resistance: 1800°F
• Intermittent Heat Resistance: 2500°F
• Dimensions: 1 inch x 50 feet
• Material: Woven pulverized lava rock fiber
• Highly resistant to abrasions, oil spills, and vibration breakdown
• Extremely pliable for a tight, secure wrap without pre-wetting
• DEI HT Silicone Coating is not required
• Manufacturer Part Number: 10126

Note: Not recommended for wrapping catalytic converters or flex-pipes. After heat cycling, the fibers lose flexibility and should not be moved or removed. Do not use on titanium exhaust systems, as the heat retention can cause thin-walled titanium alloys to become brittle and crack.

The DEI Titanium Exhaust Wrap Kit (10123) provides a professional-grade solution for managing extreme under-hood temperatures and protecting sensitive engine components. Engineered from pulverized lava rock, this Titanium series wrap is designed to withstand higher temperatures than traditional fiberglass wraps without the need for pre-wetting or specialized coatings during installation.

By insulating exhaust headers and downpipes, this wrap maintains higher internal exhaust gas temperatures, which increases gas velocity and improves scavenging for enhanced performance. It effectively reduces radiant heat to prevent heat soak, protect spark plug wires, and increase driver comfort in the cabin. This universal kit is an essential upgrade for motorcycles, street rods, muscle cars, and heavy-duty towing applications.

• Dimensions: 2in x 25ft roll of exhaust wrap
• Included Hardware: (4) 8in stainless steel locking ties to secure wrap
• Material: Titanium series (pulverized lava rock)
• Manufacturer Part Number: 10123

Installation Note: Do not wrap titanium exhaust systems, as the alloy is designed to dissipate heat quickly and may become brittle. Avoid wrapping catalytic converters or flex-joints. Once heat-cycled, the wrap fibers lose their initial flexibility and should not be moved or repositioned.

Reduce underhood temperatures by up to 50% with DEI Black Glass Fiber Exhaust Wrap. By wrapping your headers and downpipes, you keep exhaust gases hotter within the system, which decreases exhaust density and increases flow for improved horsepower and performance. This 2-inch wide wrap features integrated installation guide lines to ensure a consistent and professional overlap during application.

• Withstands 1200°F direct heat and 2000°F radiant heat
• Decreases exhaust density to accelerate exhaust flow
• Increases durability and heat retention for high-performance headers
• Includes installation guide lines for even coverage
• Manufactured from high-grade glass fiber; part number 10121

Note: Not recommended for use on titanium exhaust systems or catalytic converters. Avoid wrapping flex-pipes or flex-joints. Exhaust wrap is not designed to be moved or removed once it has been heat cycled, as the fibers lose flexibility while maintaining their thermal properties.

The DEI Black Glass Fiber Exhaust Wrap Kit is a professional-grade thermal management solution designed to reduce radiant heat from exhaust components. By insulating header tubes and downpipes, this wrap keeps exhaust gases hotter, which maintains lower gas density and increases exhaust velocity for improved scavenging. In addition to performance gains, this kit protects sensitive under-hood components like spark plug wires and wiring harnesses from heat damage while significantly lowering cockpit temperatures.

• Material: High-temperature black glass fiber
• Dimensions: 2 inches wide by 25 feet long
• Hardware: Includes four 8-inch stainless steel locking ties
• Application: Suitable for headers, downpipes, motorcycle pipes, and tailpipes
• Part Number: 10119

Installation & Usage Notes: This wrap is designed for permanent installation; once heat-cycled, the fibers lose flexibility and should not be moved or removed. Do not apply to catalytic converters, as it can cause overheating and premature failure. DEI does not recommend using this wrap on titanium exhaust systems, as the excessive heat retention can cause thin-walled titanium alloys to become brittle and crack. Avoid wrapping flex-pipes or joints that require movement.

Reduce underhood temperatures and improve system performance with the DEI Black Glass Fiber Exhaust Wrap. By insulating headers and downpipes, this wrap maintains higher exhaust gas temperatures, which decreases gas density and increases flow velocity for improved scavenging. This thermal management solution can reduce engine bay temperatures by up to 50%, protecting sensitive components and helping maintain a cooler intake air charge.

• Withstands 1200°F direct heat and 2000°F radiant heat
• Integrated installation guide lines ensure a professional, consistent overlap
• Increases exhaust flow and scavenging to support horsepower gains
• Durable glass fiber construction provides superior heat retention

Installation & Fitment Note: This wrap (MPN 10116) is not recommended for titanium exhaust systems, as it can cause the alloy to become brittle. Do not wrap catalytic converters or flex-joints. Once heat-cycled, the glass fibers lose their initial flexibility and are not intended to be removed or repositioned.

• Manufacturer Part Number: 10116
• Dimensions: 2 in. x 100 ft.
• Color: Black
• Material: Glass Fiber

DEI Glass Fiber Exhaust Wrap is a fundamental solution for managing extreme underhood heat and optimizing exhaust system performance. By insulating headers and downpipes, this wrap keeps exhaust gases hotter, which decreases gas density and increases flow velocity to improve scavenging. This 2-inch wide, 50-foot roll is capable of reducing underhood temperatures by up to 50% while protecting sensitive electronics and hoses from radiant heat damage.

Engineered from high-temperature glass fiber, this wrap features proprietary, built-in guide lines to help you maintain a consistent 1/4-inch overlap for a professional-grade finish. Once heat-cycled, the fibers set into a rigid state for maximum durability and heat retention.

• Temperature Rating: Withstands 1200°F direct and 2000°F radiant heat
• Dimensions: 2 inches wide x 50 feet long
• Material: High-temperature glass fiber
• Features: Integrated installation guide lines for even overlap
• Part Number: 10108

Installation Notes: DEI does not recommend wrapping titanium exhaust systems or catalytic converters. Exhaust wrap is not designed to be moved or removed after heat cycling, as the fibers lose flexibility. Avoid wrapping any flex-pipes or joints to prevent premature cracking.

DEI Glass Fiber Exhaust Wrap (10107) is engineered to reduce under-hood temperatures by up to 50% while improving exhaust scavenging. By insulating headers and downpipes, this 1-inch wide black wrap keeps exhaust gases hotter, decreasing density and increasing flow velocity for improved performance and a cooler intake charge. This high-temperature wrap features integrated installation guide lines to ensure a consistent, professional-grade overlap during application.

• Dimensions: 1 in. x 50 ft. roll
• Direct Heat Resistance: Withstands up to 1200°F
• Radiant Heat Resistance: Withstands up to 2000°F
• Installation Guide Lines: Built-in lines for precise, uniform wrapping
• Material: Durable black-finished glass fiber
• MPN: 10107

Note: DEI does not recommend wrapping titanium exhaust systems, as it can cause the alloy to become brittle. Do not wrap catalytic converters or flex-joints. Exhaust wrap is not intended to be moved or removed once it has been heat cycled.

DEI Glass Fiber Exhaust Wraps are engineered to mitigate extreme underhood temperatures by insulating headers and downpipes. By containing heat within the exhaust system, this wrap maintains higher exhaust gas temperatures, which decreases gas density and improves scavenging flow for increased horsepower and efficiency.

Constructed from high-temperature glass fiber, this 2-inch wide wrap features integrated installation guide lines to ensure even overlapping and professional results. Designed for durability, it withstands 1200°F of direct heat and 2000°F of radiant heat. Note that once heat-cycled, the fibers lose flexibility and should not be moved or removed; avoid wrapping flex-pipes or catalytic converters to prevent premature component failure.

• Reduces underhood temperatures by up to 50%
• Withstands 1200°F direct / 2000°F radiant heat
• Improves exhaust flow and scavenging for increased horsepower
• Integrated guide lines for consistent, professional overlapping
• Dimensions: 2in x 15ft
• Material: Tan Glass Fiber
• Manufacturer Part Number: 10106

Installation Tip: Use DEI Stainless Steel Locking Ties for a secure fit. DEI HT Silicone Coating spray is highly recommended to seal and protect the fibers, significantly extending the lifespan of the wrap.

Manage extreme underhood temperatures and optimize exhaust scavenging with DEI Tan Exhaust Wrap (10102). Wrapping headers and downpipes is a critical step in reducing radiant heat by up to 50%, protecting sensitive components and lowering intake air charges. By keeping exhaust gases hotter within the pipes, this wrap decreases gas density and increases flow velocity for improved performance.

This 2-inch by 50-foot roll is constructed from high-grade glass fiber and is the only wrap featuring integrated installation guide lines to ensure a consistent overlap for maximum thermal retention. For a professional finish, secure the wrap with stainless steel locking ties and seal with HT Silicone Coating spray to prolong its lifespan.

• Dimensions: 2 inches wide x 50 feet long
• Direct Heat Resistance: 1200°F
• Radiant Heat Resistance: 2000°F
• Integrated guide lines for precise 1/4-inch overlap
• Reduces underhood temperatures by approximately 50%
• Manufacturer Part Number: 10102

Installation Note: Do not wrap catalytic converters or flex-joints. Once heat-cycled, glass fibers lose flexibility; the wrap is not designed to be moved or removed after it has been seasoned by engine heat.

DEI Titanium Exhaust Wrap with LR Technology is engineered from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave for maximum thermal protection. This 2in x 50ft roll is significantly more durable than traditional glass fiber wraps, improving exhaust scavenging by maintaining higher internal pipe temperatures while drastically reducing under-hood radiant heat.

• Withstands 1800°F direct and 2500°F intermittent heat
• Extremely pliable for a tight, secure wrap without the need for pre-wetting
• High resistance to abrasions, chemical spills, and vibration breakdown
• Finished appearance provides a high-tech carbon fiber look
• Does not require DEI HT Silicone Coating for sealing

Installation Notes: This wrap is not designed to be moved or removed once it has undergone a heat cycle, as the fibers lose flexibility. Do not wrap catalytic converters or exhaust systems manufactured from titanium, as the heat retention can cause these specific materials to become brittle and crack. Avoid wrapping flex-pipes or flex-joints. Manufacturer Part Number: 10098.

The DEI Titanium Exhaust Wrap Kit (10095) provides a complete thermal management solution for V8 headers, motorcycle pipes, and custom exhaust systems. This all-in-one kit includes everything needed to wrap a set of headers from the cylinder head flange down to the collector, effectively reducing under-hood temperatures and maintaining exhaust gas velocity for improved performance.

• Material: DEI Titanium wrap uses proprietary technology for superior heat resistance and durability without the need for pre-wetting or silicone coatings.
• Coverage: Supplied with enough wrap for most V8 header sets or multiple motorcycle applications.
• Installation: Includes stainless steel locking ties and a dedicated tightening tool for a secure, professional finish.

Kit Includes:

• (2) 2 in. x 50 ft. Titanium Exhaust Wrap rolls
• (8) 8 in. Stainless Steel Locking Ties
• (4) 14 in. Stainless Steel Locking Ties
• (1) Locking Tie Tool

Important Installation Notes: Do not wrap catalytic converters, as excessive heat retention can lead to premature failure. Avoid wrapping flex-pipes or flex-joints. DEI does not recommend this wrap for exhausts constructed from titanium alloys, as it may cause the material to become brittle. Note that wrap fibers lose flexibility after heat cycling and should not be moved or removed once installed.

The DEI 10073 Black Titanium Exhaust Wrap Kit provides a comprehensive solution for insulating a full set of V8 headers or motorcycle pipes. Engineered to withstand high temperatures, this kit utilizes DEI’s proprietary Black Titanium wrap to lower engine bay temperatures and maintain higher exhaust gas velocities for improved scavenging. The material is constructed from pulverized lava rock, offering superior durability and heat resistance compared to standard fiberglass wraps.

• Replaces or upgrades standard fiberglass wraps for higher thermal performance
• Reduces radiant heat by up to 50%
• High resistance to chemical, oil spills, and vibration breakdown
• Includes a specialized locking tie tool for a secure, professional finish

Kit Includes:

• (2) 2 in. x 50 ft. Rolls of Black Titanium Exhaust Wrap
• (8) 8 in. Stainless Steel Locking Ties
• (4) 14 in. Stainless Steel Locking Ties
• (1) Locking Tie Tool

Installation Note: Do not wrap catalytic converters or titanium exhaust systems. Titanium alloys are thin and designed to dissipate heat quickly; wrapping them can lead to brittleness. Avoid wrapping flex-pipes or flex-joints. Once heat-cycled, the wrap is not designed to be removed or repositioned.

The DEI Titanium Knitted Sleeve (MPN 10049) provides high-efficiency thermal management for automotive exhaust systems. These sleeves are engineered to isolate radiant heat, preventing it from transferring into the vehicle cabin or damaging nearby components like wiring harnesses and fuel lines. The specialized knitted construction allows the material to expand up to 1.5 times its resting diameter, making it easy to slide over exhaust flanges, sensor bungs, and bends without snagging.

This sleeve is sized for 2.5-inch to 3-inch outside diameter (OD) tubing and features a finished 12-inch length. For custom applications, the sleeve can be cut to length with the ends rolled for a professional, fray-resistant finish. This complete kit includes stainless steel locking ties and an installation tool to ensure a secure, permanent fit on the exhaust pipe.

• Material: High-temperature Titanium knitted sleeve
• Fitment: Designed for 2.5-inch to 3-inch diameter tubes
• Length: 12-inch finished length
• Maximum Temperature: 1800°F (982°C)
• Continuous Temperature: 1382°F (750°C)
• Expansion Rate: Up to 1.5x original diameter
• Hardware Included: Stainless steel locking ties and installation tool
• Manufacturer Part Number: 10049

The DEI Titanium Knit Exhaust Sleeve (MPN 10048) provides professional-grade thermal protection for high-heat exhaust systems. Designed specifically for 4-inch tubing, this 36-inch sleeve uses a flexible knit construction that can expand up to 1.5 times its resting diameter. This expansion capability is critical for mechanics and enthusiasts, as it allows the sleeve to slide easily over bulky exhaust flanges and sensor bungs without snagging.

Constructed from crushed volcanic rock fiber (Titanium), this sleeve effectively traps heat within the exhaust pipe to improve scavenging and reduce radiant heat transfer to sensitive underbody components and the cabin floor. The material is highly durable and allows for custom fitments; simply cut to the required length and roll the ends for a fray-resistant finish.

• Continuous Temperature Rating: 1382°F (750°C)
• Maximum Temperature Peak: 1800°F (982°C)
• Tube Fitment: 4-inch (101.6mm) diameter
• Expansion: Up to 1.5x diameter for flange/sensor clearance
• Finished Length: 36 inches
• Includes: Stainless steel locking ties and installation tool
• Manufacturer Part Number: 10048

The DEI Titanium Knit Exhaust Sleeve (MPN 10042) offers advanced thermal management for high-performance exhaust systems. Measuring 36 inches in length and sized specifically for 3-inch diameter tubing, this sleeve uses a proprietary titanium knit construction that maintains flexibility while providing a barrier against extreme radiant heat. It is an ideal solution for protecting sensitive engine components and reducing heat transfer into the vehicle cabin.

Designed for easy installation on complex assemblies, this knit sleeve can expand up to 1.5 times its resting diameter. This allows the material to slide easily over exhaust flanges, sensor bungs, and hangars without requiring complete disassembly of the exhaust system. The material can be trimmed to size and the ends rolled for a secure, fray-resistant finish.

• Material: Titanium knit construction
• Dimensions: 36" length for 3" O.D. tubing
• Temperature Rating: 1382°F (750°C) continuous / 1800°F (982°C) maximum
• Expansion: Up to 1.5x diameter for sliding over flanges and hardware
• Included Hardware: Stainless steel locking ties and installation tool
• Manufacturer Part Number: 10042

The DEI Titanium Knit Exhaust Sleeve offers professional-grade thermal management for high-performance exhaust systems. Specifically designed for 4-inch diameter tubing, this 24-inch sleeve utilizes DEI’s Titanium technology to significantly reduce radiant heat transfer, protecting sensitive under-chassis components and lowering cabin floor temperatures. The material features a technical carbon fiber look and is engineered to withstand extreme heat, with a continuous rating of 1382°F and a maximum temperature limit of 1800°F.

Installation is streamlined by the sleeve's unique knitted construction, which allows it to expand up to 1.5 times its resting diameter. This flexibility enables you to slide the sleeve over exhaust flanges, oxygen sensor bungs, and complex bends without disassembling the entire system. Highly pliable and durable, the sleeve resists vibration breakdown, oil spills, and abrasions while requiring no pre-wetting for installation.

• Fits: 4-inch (102mm) diameter exhaust pipes
• Length: 24 inches (pre-cut)
• Expansion: Up to 1.5x diameter for easy installation over hardware
• Temperature Rating: 1382°F continuous / 1800°F maximum
• Resistance: Withstands 1200°F direct and 2500°F intermittent radiant heat
• Finish: High-tech carbon fiber appearance
• Maintenance: Chemical, oil, and vibration resistant
• Included: Stainless steel locking ties and installation tool
• Manufacturer Part Number: 10040