Maintain precise flow control and prevent damaging backflow with the Vibrant Performance 1/2" Barbed One-Way Check Valve. This component is essential for automotive plumbing systems where maintaining directional flow is critical for performance and component longevity. By allowing flow in only one direction, it protects sensitive sensors and maintains vacuum or pressure levels in dedicated lines.

• Prevents backflow in vacuum, air, and fluid systems
• 1/2" barbed ends provide a secure interface for standard 1/2" ID hoses
• Compact, inline design allows for easy installation in tight engine bays
• Engineered for reliable operation in high-performance environments
• Ideal for PCV systems, brake booster lines, and custom plumbing applications

Ensure precise fluid or air direction with the Vibrant Performance 3/8in Barbed Check Valve. Designed to prevent backflow in vacuum, air, or low-pressure fluid systems, this one-way valve is a critical component for maintaining system integrity and protecting sensitive hardware from reverse pressure or fluid migration.

• Inlet/Outlet Size: 3/8in Barbed
• Function: Reliable one-way flow control to prevent backflow
• Installation: Secure barbed ends for direct fitment into rubber or silicone hoses
• Compatibility: Suitable for vacuum lines, PCV systems, and non-corrosive fluid management

This Vibrant Performance one-way check valve is engineered to prevent backflow and maintain pressure in low-pressure pneumatic and fluid systems. It is a critical component for custom vacuum routing, boost control lines, and fuel vapor systems where directional flow is required to protect sensitive components and ensure consistent engine performance.

• 5/16in (8mm) barbed inlet and outlet ends for secure hose retention
• Precision one-way flow design to eliminate reverse pressure
• Compact profile allows for installation in tight engine bay configurations
• Ideal for vacuum, air, and non-corrosive fluid applications

The Vibrant T6 Turbo Compressor Outlet Flange to 4-inch HD Weld Ferrule provides a secure, leak-proof connection for high-boost induction systems. Designed specifically for T6-frame turbochargers, this component converts the compressor discharge to a modular 4-inch HD clamp interface, eliminating the reliance on traditional silicone couplers and worm-gear clamps that can fail under extreme pressure.

• Precision Fitment: Engineered to mate directly with T6 turbocharger compressor outlets.
• HD Series Compatibility: Features an integrated 4-inch HD weld ferrule designed for use with Vibrant Performance HD Clamps.
• Reliable Performance: Ideal for high-pressure forced induction applications where coupler blow-off or boost leaks are a concern.
• Fabrication Ready: Provides a professional, rigid transition for custom intercooler piping and charge air systems.

The Vibrant Performance LS DBC 102mm Throttle Body to 4-inch HD Adapter provides a rigid, leak-proof connection for high-boost LS engine applications. This precision-machined component allows for the direct transition from a 102mm Drive-By-Cable (DBC) throttle body to a 4-inch Vibrant HD Clamp system, eliminating the reliability issues associated with traditional silicone couplers under extreme pressure.

• Designed specifically for 102mm LS Drive-By-Cable (DBC) throttle bodies
• Adapts throttle body inlet to a 4-inch Vibrant HD Clamp assembly
• Maintains a secure, high-pressure seal in forced induction setups
• Engineered for precision fitment and maximum flow transition
• Ideal for race-tier plumbing where coupler failure is not an option

Ensure a leak-free seal on your forced induction system with this Turbosmart replacement O-ring, specifically engineered for the 2.50-inch compressor outlet turbo adapter. Maintaining a precise seal at the turbocharger outlet is critical; even a minor leak can lead to significant boost pressure loss, increased turbo lag, and reduced engine efficiency.

• Designed specifically for Turbosmart 2.50in compressor outlet adapters
• Constructed from high-temperature resistant material to handle extreme thermal cycles
• Direct replacement for worn, flattened, or brittle seals to prevent boost leaks
• Restores airtight integrity between the turbocharger and the charge piping

Ensure a reliable, leak-free seal in your forced induction system with this genuine Turbosmart replacement O-ring. Designed specifically for the 3.00-inch Turbosmart turbo compressor outlet adapter, this high-quality seal prevents performance-robbing boost leaks and maintains consistent pressure throughout the intake tract.

• Direct replacement for 3.00-inch Turbosmart turbo adapter compressor outlet seals
• Engineered for high-temperature resistance in demanding engine bay environments
• Precision-molded profile ensures a proper seat between the adapter and the compressor housing
• Essential hardware for routine maintenance or when re-installing turbo components

Achieve consistent, professional-grade welds with the Ticon Industries Tig Aesthetics silicone purge plug. Designed specifically for back-purging 2.5-inch tubing, this high-temperature silicone plug creates a reliable seal to contain shielding gas, preventing oxidation and "sugaring" on the backside of the weld bead. This is an essential tool for fabricators working with stainless steel, titanium, and other reactive metals where weld purity is critical.

The tapered design allows for easy insertion and a snug fit inside standard 2.5-inch tubing. These plugs are manufactured from durable, heat-resistant silicone to withstand the thermal demands of the fabrication shop without melting or outgassing during the welding process.

• Brand: Ticon Industries
• Series: Tig Aesthetics
• Material: High-temperature silicone
• Size: 2.5in (63.5mm)
• Color: Yellow
• Application: TIG welding back-purge

Streamline your welding workflow and ensure interior weld integrity with the Ticon Industries Tig Aesthetics 1.25-inch silicone purge plug. Designed specifically for TIG welding applications, this plug provides a reliable, airtight seal in 1.25-inch pipe to facilitate efficient back-purging with inert gas.

• Engineered for 1.25-inch pipe diameters to maintain a secure seal during the purging process
• Manufactured from high-temperature resistant silicone to withstand the heat cycles of manifold and exhaust fabrication
• Vibrant magenta color allows for quick identification and ensures the plug isn't accidentally left inside a finished assembly
• Essential for preventing oxidation and 'sugaring' on the back side of stainless steel, titanium, and chrome-moly welds
• Compatible with Tig Aesthetics argon diffuser systems and standard purging setups

Maintain internal weld integrity with the Ticon Industries Tig Aesthetics 1-inch silicone purge plug kit. Specifically designed for back-purging 1.00" tubing, these high-temperature silicone plugs create a reliable, airtight seal to prevent oxidation and "sugaring" on the backside of your welds. The included mesh diffusers ensure laminar argon flow, displacing oxygen efficiently without causing turbulence that can contaminate the weld pool.

• Designed for 1.00-inch tubing applications
• High-temperature resistant orange silicone construction
• Stainless steel mesh diffusers for even gas distribution
• Includes 2 silicone plugs, 2 diffusers, and 1 argon inlet
• Ideal for sanitary stainless and titanium TIG welding

Precision-engineer custom intake and intercooler plumbing with this set of Ticon aluminum pie cuts. Designed for fabricators who need to navigate tight engine bays where standard mandrel bends won't fit, these segments allow for highly specific routing and clearance. Each 15-degree segment features a 2mm wall thickness, providing a stable, high-quality material for TIG welding.

This 1D radius (4-inch centerline radius) set is optimized for compact packaging. When joined, the six included pieces form a complete 90-degree bend, ideal for custom turbo inlets, charge pipes, and cold air intakes.

• Material: Aluminum
• Outside Diameter: 4" (101.6mm)
• Wall Thickness: 2mm
• Angle: 15 Degrees per segment
• Total Bend: 90 Degrees (6 segments)
• Radius: 1D (1in D)
• Quantity: Pack of 6

Construct complex, tight-radius bends for custom intake or cooling systems with this 6-pack of Ticon aluminum pie cuts. These 15-degree sections are precision-cut to allow for a total 90-degree bend when welded together, providing a professional solution for fabrication in tight engine bays where standard mandrel bends may not fit.

• Material: High-quality aluminum
• Diameter: 3 inches (76.2mm)
• Wall Thickness: 2mm (0.079")
• Bend Angle: 15 degrees per section
• Bend Radius: 1D Tight Radius (TR)
• Quantity: Pack of 6 (Creates a full 90-degree bend)

Designed for professional fabricators, these sections eliminate the need for expensive mandrel bending equipment and provide consistent wall thickness throughout the bend. These are ideal for custom turbo plumbing, intercooler piping, and intake tracts where precision and weld consistency are required.

The Ticon Industries 3-inch Aluminum Donut is a specialized component designed for custom fabrication in tight engine bays. These donuts allow fabricators to create custom tight-radius bends that standard mandrel-bent tubing cannot accommodate. By sectioning the donut to specific degrees, you can achieve precise routing for intake systems, intercooler piping, and other lightweight plumbing applications.

• Material: Aluminum
• Outer Diameter: 3 in
• Wall Thickness: 2mm (.078 in)
• Construction: Engineered for high-quality welding and fitment
• Application: Ideal for tight-radius custom plumbing and fabrication projects

This Ticon Industries V-band clamp is engineered specifically for secure attachment to PTE G40, G42, and G45 Sportsman turbine outlets. Designed for high-performance forced induction systems, this clamp ensures a reliable, leak-free seal between the turbocharger discharge and the downpipe, maintaining integrity even under extreme thermal expansion and high exhaust pressures.

• Fits PTE G40, G42, and G45 Sportsman Turbine Outlets
• Precision sized for 4.625-inch (4.625in) flange diameters
• V-band design allows for quick installation and removal during tuning or maintenance
• Heavy-duty construction optimized for the high-heat environment of a turbine housing exit
• Ensures a high-pressure seal without the need for traditional gaskets

Fabricate high-performance exhaust or intake systems with the precision of Ticon Industries titanium. This 3-inch diameter elbow is engineered for professional builders who prioritize weight reduction without compromising structural integrity. The 1.2mm (0.039") wall thickness provides the ideal balance for welding and durability in high-heat environments.

Featuring a 1.5D loose radius, this 45-degree bend ensures smooth flow characteristics for forced induction or naturally aspirated setups. The "no leg" design allows for maximum versatility in tight engine bays, enabling you to trim and fit the component exactly where needed for custom chassis or exhaust routing.

• Material: High-quality Titanium
• Outside Diameter: 3.0" (76.2mm)
• Wall Thickness: 1.2mm / 0.039"
• Bend Angle: 45 Degrees
• Radius: 1.5D (Loose Radius)
• Leg Style: No Leg / Zero Leg

Secure your wastegate dump pipe with the TiAL Sport MVS V-Band Outlet Clamp. Engineered specifically for the outlet side of the MVS 38mm external wastegate, this "V Style" clamp ensures a tight, leak-free seal between the wastegate body and the exhaust discharge plumbing.

• Designed exclusively for TiAL Sport MVS 38mm external wastegates
• High-temperature construction resists heat-cycling fatigue
• V-band design allows for easy orientation and quick serviceability
• Provides a secure mechanical connection for dump tubes or atmospheric vents
• Genuine TiAL Sport hardware

This replacement clamp is essential for new installs or for replacing a worn or stripped clamp during exhaust maintenance. Its precise tolerances match the MVS outlet flange to prevent exhaust leaks that can affect boost control and engine bay temperatures.

This genuine TiAL Sport MVS Inlet V-Band Clamp provides the precise clamping force necessary to maintain a gas-tight seal between your wastegate and the exhaust manifold. Designed specifically for the MVS (38mm) series, this V-style clamp is engineered to withstand the extreme thermal cycles and vibration levels found in high-performance turbocharged applications.

Constructed from high-grade stainless steel, this clamp ensures proper alignment and a secure fitment that won't back off or distort under pressure. It is an essential component for both new installations and as a direct replacement for lost or worn hardware from an original TiAL MVS kit.

• Compatible with TiAL Sport MVS 38mm wastegate units
• High-temperature stainless steel construction for maximum durability
• Specific V-style profile for precise manifold flange engagement
• Maintains a leak-free seal at the primary inlet point

This genuine TiAL Sport replacement outlet clamp is engineered specifically for the MVR 44mm external wastegate. Utilizing the updated New Band Style design, this V-band clamp provides the precise clamping force and tension required to secure the wastegate outlet to your dump tube or exhaust piping.

Fabricated from high-grade stainless steel, this clamp is built to withstand extreme thermal cycling and the high-heat environment of a turbocharged exhaust system. It ensures a reliable, leak-free seal that maintains integrity under vibration and high-pressure conditions.

• Designed for TiAL Sport MVR 44mm external wastegates
• New Band Style V-band configuration for consistent sealing
• Durable stainless steel construction for heat and corrosion resistance
• Genuine TiAL Sport component for precise fitment

Secure your external wastegate with this genuine TiAL Sport MV-R 44mm Inlet V-Band Clamp. Specifically engineered for the inlet side of the MV-R series, this "New Band Style" clamp provides the precise clamping force required to maintain a leak-free seal between the wastegate and the manifold flange under extreme exhaust temperatures and high-pressure conditions.

• Compatible with TiAL Sport MV-R 44mm external wastegates
• Engineered specifically for the wastegate inlet flange
• Updated "New Band Style" design for consistent tensioning and reliability
• High-strength stainless steel construction resists heat-cycling and corrosion
• Authentic TiAL Sport component ensures perfect fitment and safety

The TiAL Sport MVR Outlet V-Band Clamp is a precision-engineered hardware component designed specifically for the MVR 44mm external wastegate. This clamp provides the high-tension clamping force required to secure the discharge flange or dump tube to the wastegate body, ensuring a reliable, leak-free connection capable of withstanding extreme exhaust temperatures and pressures.

• Direct replacement or optional outlet clamp for TiAL Sport MVR 44mm wastegates
• High-strength stainless steel construction for maximum corrosion and heat resistance
• Ensures a secure, gasketless seal between the wastegate and the exhaust discharge piping
• Designed for ease of installation and removal during turbo system maintenance

The TiAL Sport MVR inlet V-band clamp provides a high-tension, leak-free seal for your 44mm external wastegate. Engineered to withstand the extreme thermal cycles of a high-performance turbocharger system, this clamp secures the wastegate body to the manifold inlet flange.

• Fits TiAL Sport MVR 44mm external wastegates
• Manufactured from high-grade stainless steel for maximum durability and corrosion resistance
• Maintains consistent clamping force under extreme exhaust heat and pressure
• Genuine TiAL Sport replacement hardware for a precise fit

This genuine TiAL Sport v-band clamp is designed specifically for the discharge or outlet side of the MV-S 38mm wastegate. It provides a secure, high-tension connection between the wastegate body and the dump tube flange, ensuring a leak-free seal that is critical for managing exhaust flow and protecting engine bay components from heat.

• Direct fit for TiAL Sport MV-S (38mm) external wastegates
• Designed for the outlet/discharge side (dump tube connection)
• Compact v-band profile allows for easy rotation and orientation during installation
• Precision-engineered hardware for high-temperature exhaust environments
• Genuine TiAL Sport replacement component

Secure your wastegate setup with the TiAL Sport MVS Inlet V-Band Clamp. This specific clamp is designed to provide a high-pressure, leak-free seal between your exhaust manifold and the inlet side of a TiAL MVS 38mm external wastegate. Its compact profile is engineered for tight engine bays where traditional bolted flanges or bulkier clamps may interfere with surrounding components.

• Fits TiAL Sport MVS 38mm external wastegates
• Corrosion-resistant stainless steel construction for high-heat durability
• Provides a reliable, gasket-free seal at the wastegate inlet flange
• Direct replacement for lost or damaged original hardware
• Quick-release design allows for easier servicing and wastegate maintenance

The TiAL Sport QRJ Blow Off Valve 1.34in (34mm) Tube Flange is a precision-engineered mounting solution designed specifically for the modular QRJ series valve. This adapter allows for a direct, secure connection to 34mm (1.34-inch) charge pipes or intercooler plumbing, ensuring the valve remains stable and properly sealed under high boost conditions.

• Designed specifically for TiAL Sport QRJ Series Blow Off Valves
• Outer Diameter: 1.34in (34mm)
• Configuration: Tube/Hose mount flange
• Precision-machined for a leak-free fit and optimal pressure retention
• Ideal for custom charge pipe fabrication and OE bypass valve replacement

The TiAL Sport QRJ adapter flange provides a precise solution for mounting a QRJ series Blow Off Valve onto an existing Q or QR V-band flange. This component is engineered for enthusiasts looking to update their forced induction setup without the need for cutting or re-welding existing charge pipes or intercooler plumbing.

• Designed specifically to adapt TiAL QRJ BOV bodies to standard Q and QR series V-band mounting points
• Precision-machined construction ensures a secure, leak-free seal under high boost pressures
• Enables quick valve swaps and simplifies system reconfigurations
• Eliminates the need for additional fabrication when upgrading to a QRJ valve

This genuine TiAL Sport V-band inlet clamp is engineered to provide a high-pressure, leak-free seal for critical exhaust connections. Designed specifically for use with wastegate and turbocharger inlet flanges, this clamp ensures your forced induction system maintains peak performance by preventing exhaust leaks that can lead to slower spool times and lost boost.

• Genuine TiAL Sport high-performance hardware
• V-band design allows for easy removal and 360-degree component clocking during installation
• Distributes uniform clamping pressure around the entire flange circumference
• Ideal for tight engine bays where traditional bolted flanges are impractical
• Built to withstand extreme thermal cycling and high-heat environments

Whether you are plumbing a new external wastegate or mounting a turbocharger, this V-band clamp replaces worn or damaged hardware to restore a secure connection between the manifold and the component housing.

The TiAL Sport V-Band Outlet Clamp provides a secure, gasket-free seal for high-performance exhaust and turbocharger systems. Engineered to withstand the extreme thermal cycles inherent in forced induction applications, this clamp ensures a precision connection between V-band flanges, preventing exhaust leaks that can compromise boost response or lead to inaccurate oxygen sensor readings.

• Genuine TiAL Sport hardware ensures exact compatibility and clamping force
• V-band configuration facilitates quick-release for efficient component servicing and alignment
• Eliminates the need for traditional gaskets in high-heat areas
• High-strength construction designed to maintain tension under extreme pressure and vibration

The TiAL Sport 3.0-inch V-Band Inlet Clamp is engineered to provide a high-pressure, leak-free seal for turbocharger housings and exhaust components. Built to withstand the extreme thermal cycling and vibration found in high-performance forced induction systems, this clamp ensures a secure mechanical connection between 3.0-inch V-band flanges without the need for traditional gaskets.

• Size: 3.0-inch (76mm) nominal diameter
• Material: High-strength stainless steel construction for corrosion and heat resistance
• Closure: Robust T-bolt design with a high-temperature locking nut
• Application: Designed specifically for TiAL 3.0" V-band inlet flanges and compatible turbocharger housings
• Part Type: Exhaust/Inlet V-Band Clamp

This genuine TiAL Sport MV-S plug is engineered to seal unused air or water cooling ports on the MV-S 38mm external wastegate. Maintaining a leak-free seal is critical for consistent boost control and preventing coolant loss in water-cooled configurations. Whether you are simplifying your vacuum line routing or running a dry setup without water cooling, this port plug provides the secure, high-pressure seal required for forced induction environments.

• Fits TiAL Sport MV-S 38mm external wastegates
• Seals unused air signal or water cooling ports
• Precision-machined construction for reliable sealing under high temperatures and pressures
• Essential for custom turbocharger plumbing and boost control setups
• Genuine TiAL Sport replacement component

This TiAL Sport weld-on flange is an essential component for custom forced induction projects, providing a secure mounting point for your blow-off valve on aluminum charge pipes or intercooler piping. Precision-machined from high-grade aluminum, this flange ensures a stable, leak-free mating surface that perfectly matches the TiAL BOV mounting profile.

Engineered for durability and ease of installation, it is designed to be TIG-welded directly to aluminum intake tubing. This flange provides the structural integrity needed to withstand high boost pressures without the risk of flange distortion or leaks often found in lower-quality alternatives.

• Material: High-grade 6061-type aluminum
• Installation: Weld-on (TIG recommended)
• Application: Custom aluminum charge pipes and intercooler systems
• Compatibility: Fits TiAL Sport blow-off valve mounting bases