Maintain peak fuel system integrity with the Injector Dynamics O-Ring and Seal Service Kit. This kit is designed specifically for injectors equipped with 14mm top adapters and 14mm clear bottom adapters, providing the exact replacement seals required when servicing or reinstalling your injectors.

Ensuring a fresh seal is critical whenever fuel injectors are removed from the fuel rail or intake manifold. These high-grade elastomer components are engineered to withstand the extreme thermal cycles and chemical exposure of performance fuel systems, preventing boost leaks and dangerous fuel spray.

• Specifically designed for Injector Dynamics 14mm top and 14mm clear bottom adapters
• Direct replacement for worn or damaged O-rings and seals
• High-quality elastomer construction for superior chemical and heat resistance
• Essential for routine maintenance or fuel system upgrades
• Helps ensure airtight and leak-free fuel injector seating

Maintain the integrity of your fuel system with the Injector Dynamics O-Ring and Seal Service Kit. This kit is specifically designed for fuel injectors utilizing a 14mm top adapter and a 14mm bottom configuration. Over time, heat cycles and fuel exposure can cause O-rings to flatten, crack, or lose their sealing properties; this kit provides the necessary replacements to ensure a leak-free installation.

Properly sealed injectors are critical for preventing vacuum leaks at the intake manifold and high-pressure fuel leaks at the rail. These components are manufactured to strict tolerances, ensuring a secure fit and long-term durability in high-performance environments.

• Compatible with Injector Dynamics injectors using 14mm top and 14mm bottom adapters
• Designed to withstand high fuel pressures and under-hood temperature extremes
• Essential for resealing injectors during fuel rail maintenance or manifold swaps
• Direct replacement for worn or damaged factory-supplied seals

Maintain peak fuel system integrity and prevent dangerous leaks with the Injector Dynamics O-Ring and Seal Service Kit. This kit is specifically engineered for injectors configured with an 11mm top adapter and standard 14mm bottom O-rings, providing a direct replacement for worn, flattened, or brittle seals.

Over time, heat cycles and fuel exposure degrade elastomer seals, which can lead to vacuum leaks at the intake or fuel spray at the rail. Whether you are performing routine maintenance or reinstalling injectors after a rail upgrade, using fresh seals is critical for ensuring an airtight and fluid-tight fitment. These high-grade O-rings are designed to withstand the pressures of modern high-performance fuel systems.

• Genuine Injector Dynamics service components
• Compatible with 11mm top fuel rail adapters
• Fits standard 14mm bottom injector bores
• Resistant to various fuel types and high under-hood temperatures
• Ensures proper sealing to prevent unmetered air entry and fuel leaks

Maintain the integrity of your fuel system with this Injector Dynamics O-Ring and Seal Service Kit. Specifically engineered for injectors equipped with a 14mm bottom adapter, this kit provides the essential sealing components required to ensure a leak-free interface between the injector and the manifold or fuel rail.

Over time, heat cycles and fuel exposure can cause O-rings to become brittle or compressed, leading to vacuum leaks or dangerous fuel spray. This service kit is a critical maintenance item whenever injectors are removed and reinstalled, providing a reliable seal that stands up to high-pressure demands. Each component is manufactured to precise tolerances to match the high standards of Injector Dynamics fuel delivery systems.

• Designed exclusively for Injector Dynamics injectors with 14mm bottom adapters
• Ensures airtight and fuel-tight sealing for consistent engine performance
• High-grade elastomer construction for chemical and heat resistance
• Includes necessary O-rings and seals for a complete service
• Direct replacement for worn or damaged factory seals

Maintain the integrity and safety of your high-performance fuel system with this Injector Dynamics O-Ring and Seal Service Kit. Designed specifically for fuel injectors utilizing a 14mm top adapter and a 14mm bottom o-ring configuration, this kit provides the high-quality replacement seals necessary to prevent vacuum leaks and hazardous fuel spray.

• Direct replacement for Injector Dynamics injectors with 14mm top and bottom seal requirements
• Prevents pressurized fuel leaks between the fuel rail and the injector
• Ensures an airtight seal at the intake manifold to maintain consistent idle and tuning
• Includes precision-molded elastomer o-rings for superior thermal and chemical resistance
• Essential for routine maintenance or when reinstalling injectors after cleaning

Maintain the integrity of your high-performance fuel system with the Injector Dynamics F750 Bowl O-ring. This precision-engineered seal is a direct replacement for the original O-ring found in the F750 fuel filter assembly, ensuring a leak-free connection between the filter bowl and the main housing. Designed to withstand constant exposure to various fuel types, this O-ring prevents pressure loss and seepage.

• Genuine replacement component for the Injector Dynamics F750 fuel filter
• Ensures a secure, fuel-resistant seal for the filter bowl
• Critical for preventative maintenance during filter element changes
• High-grade elastomer construction for long-term durability

The Radium Engineering FPD-XR Inline Fuel Pulse Damper is engineered to manage fuel pressure oscillations and minimize the hydraulic noise generated by high-flow injectors. By smoothing out these pressure pulses, the FPD-XR helps ensure more accurate fuel delivery and prevents fluctuations that can affect engine tuning and performance.

Constructed with high-quality internal components, this damper features an inline design with 8AN ORB (O-ring Boss) inlet and outlet ports. It also includes an integrated 1/8 NPT port, making it straightforward to install a fuel pressure gauge or a pressure sensor directly into the fuel path. Note that fuel line adapter fittings are not included and must be sourced to match your specific plumbing requirements.

• Manufacturer Part Number: 20-0200
• Ports: Dual 8AN ORB (Inlet/Outlet)
• Integrated Port: 1/8" NPT for fuel pressure gauge or sensor
• Housing Material: CNC machined aluminum
• Compatibility: Compatible with most pump and race fuels
• Function: Stabilizes fuel pressure and reduces injector noise

The Radium Engineering Fuel Vent Charcoal Canister is designed to trap unwanted fuel vapors escaping from competition fuel cell vent lines. By installing this canister in-line with the vent hose, you can eliminate the strong fuel smells often associated with storing high-performance vehicles in enclosed garages or trailers. The internal activated carbon element is specifically engineered to neutralize odors without impeding essential air flow to the fuel cell.

Built for maximum installation flexibility, this canister can be mounted in any orientation to suit your plumbing layout. It features large 16AN ORB female ports and includes high-quality adapters to reduce the ports to a 10AN ORB female size, making it adaptable to a wide range of racing fuel systems.

• Manufacturer Part Number: 20-1828-00
• Primary Port Size: 16AN ORB (Female)
• Included Adapters: Two 16AN ORB to 10AN ORB (Female)
• Internal Media: Activated carbon
• Fitment: Universal for competition fuel cell vent lines
• Mounting: Can be used in any orientation

The Radium Engineering FPD-R (Fuel Pulse Damper-Radial) is an inline solution designed to attenuate fuel pressure oscillations caused by the rapid opening and closing of fuel injectors. By smoothing out these pulses, the FPD-R ensures more consistent fuel delivery and helps eliminate erratic pressure readings and lean spots in high-performance fuel systems.

• Manufacturer Part Number: 20-0199
• Ports: Dual 8AN ORB (inlet/outlet)
• Auxiliary Port: 1/8" NPT for fuel pressure gauge or sensor integration
• Configuration: Inline mounting

Note: Fuel line adapter fittings are not included and must be selected separately to match your specific plumbing requirements.

The DeatschWerks 8AN Male Flare to 3/8" Hardline Compression Adapter provides a reliable, leak-free solution for plumbing fuel, oil, or coolant systems. This fitting allows for the direct adaptation of a standard 3/8-inch OD hardline to an -8AN hose assembly without the need for specialized flaring tools on the hard tubing.

Constructed for high-pressure automotive environments, this adapter features a durable matte black anodized finish for superior corrosion resistance. The compression design utilizes an included brass olive (ferrule) to create a mechanical seal against the hardline, ensuring a secure fit even under high-vibration or high-demand conditions.

• Manufacturer Part Number: 6-02-0110-B
• Adapter Size: 8AN Male Flare to 3/8" Hardline
• Material: Aluminum with Anodized Matte Black Finish
• Included Hardware: (1) Brass Olive/Ferrule Insert
• Installation: Compression fit; no flaring of the hardline required

Ensure the longevity and performance of your fuel system with the Walbro 125-165 Fuel Filter Sock. Designed by TI Automotive as a specialized inlet strainer, this component attaches directly to the fuel pump intake to filter out particulate matter and tank debris before it can enter the pump internals. This prevents abrasive wear and potential clogging, maintaining consistent fuel flow and pressure during operation.

• Genuine TI Automotive (Walbro) component engineered for high-performance applications
• Serves as a critical pre-filter to protect fuel pump internals from damage
• Designed for a secure, direct fit on compatible TI Automotive fuel pumps and modules
• High-flow mesh construction ensures minimal restriction while maximizing filtration
• Manufacturer Part Number: 125-165

The Exergy Performance E06 11024 fuel rail pressure sensor is a high-accuracy monitoring component designed for high-pressure common rail diesel systems. Engineered to handle extreme operating conditions, this sensor provides the precise data necessary for the engine control unit (ECU) to manage injection timing and fuel volume with exacting tolerances.

This sensor is an essential upgrade or replacement for high-performance builds where fuel rail pressures exceed factory sensor limits. Its robust construction ensures reliable performance in high-vibration and high-heat environments common in heavy-duty and performance diesel applications.

• Manufacturer Part Number: E06 11024
• Pressure Rating: 0-2400 Bar (34,800 PSI)
• Compatible with high-pressure common rail fuel systems
• Ensures accurate real-time feedback for tuning and engine safety

The Exergy Performance 0-2200 Bar (32,000 PSI) Rail Pressure Sensor is designed for precise monitoring of high-pressure fuel systems in common rail diesel applications. This sensor provides the engine control unit (ECU) with accurate, real-time data necessary to manage fueling levels and maintain engine safety, especially in high-output or modified setups where factory sensors may reach their functional limits.

• Manufacturer Part Number: E06 11022
• Pressure Rating: 0-2200 Bar (32,000 PSI)
• Type: Common Rail Fuel Pressure Sensor
• Built for high-durability and stable signal output under extreme diesel engine bay conditions
• Direct replacement for sensors requiring an extended 2200 Bar range

Fits select 2011-2016 Chevrolet Duramax trucks (6.6L).

The Exergy Improved Stock Inlet Metering Valve (FCA/MPROP) is engineered to deliver more precise fuel regulation than standard factory components. This high-quality replacement valve is critical for maintaining stable rail pressure, ensuring your 6.6L LML Duramax engine operates efficiently under various load conditions and performance demands. By improving the metering of fuel entering the high-pressure pump, it helps eliminate pressure oscillations common with worn or lower-quality actuators.

• Manufacturer Part Number: E05 10505
• Improved design for more precise fuel metering over standard stock units
• Direct replacement for the original Fuel Control Actuator (FCA) / MPROP
• Essential for maintaining consistent rail pressure and engine stability
• Designed specifically for the 2011-2016 LML Duramax fuel system

Maintain the integrity of your fuel system with this Injector Dynamics O-Ring and Seal Service Kit. Specifically engineered for injectors utilizing an 11mm top adapter and a WRX bottom adapter, this kit provides a complete set of replacement seals essential for injector maintenance or reinstallation. Proper sealing at the fuel rail and intake manifold is critical to preventing vacuum leaks and hazardous fuel spray.

• Genuine Injector Dynamics replacement components
• Designed for injectors with 11mm top adapters and WRX-style bottom adapters
• High-grade elastomers compatible with modern fuel types
• Includes all necessary O-rings and seals for a complete service
• Manufacturer Part Number: SK.48.11.WRX

The Injector Dynamics Metal Retention Clip is a precise replacement component designed to secure electrical adapter tops to the injector body. Engineered for the rigors of high-performance fuel systems, this clip provides the necessary tension to maintain a stable connection, preventing accidental disconnection due to engine vibration or thermal expansion.

• Authentic Injector Dynamics replacement hardware
• Maintains secure contact between adapter top and injector
• High-strength metal construction for durability in high-heat environments
• Manufacturer Part Number: 92.9

The Fuelab 71703 High Flow One Way Check Valve is a critical component for maintaining consistent fuel system performance. By preventing fuel from draining back into the tank when the pump is off, this valve maintains line pressure for quicker engine starts and prevents pump cavitation during initial priming. Designed for high-performance applications, it features a high-flow internal design that supports up to 350 GPH with minimal restriction.

• Manufacturer Part Number: 71703
• Fitting Size: -8AN (Inlet and Outlet)
• Flow Rating: 350 GPH
• Operation: One-way check valve to prevent backflow and maintain fuel prime
• Compatibility: Suitable for high-demand fuel systems requiring -8AN plumbing

The Walbro MP-16 Multi-Point Fuel Pick-Up is a critical component for maintaining consistent fuel delivery in high-performance fuel cells and custom tanks. Engineered to prevent fuel starvation, this pickup uses an internal valve that automatically closes when exposed to air. This ensures your fuel pump only draws from pickups still submerged in fuel, preventing cavitation during high-G cornering, steep inclines, or low fuel levels.

• Manufacturer Part Number: MP-16
• Prevents air from entering the fuel system in racing and off-road applications
• Designed for use in multi-point pickup configurations to ensure constant suction
• Reliable operation in varied fuel types and harsh racing environments

The Walbro MP-13 is a dead-end style in-tank fuel pickup engineered for reliable fuel scavenging in custom fuel cells, surge tanks, and high-performance fuel systems. As a termination point for the fuel suction line, this pickup is designed to maintain a steady flow of fuel even during aggressive maneuvers or low-fuel conditions.

This MP-13 model includes an integrated bleed hole, a critical feature for preventing air-lock. The bleed hole allows trapped air and vapor to escape the pickup assembly, ensuring the fuel pump can quickly prime and draw fuel the moment the pickup is re-submerged. This makes it an ideal choice for off-road vehicles or track cars where fuel slosh is common.

• Manufacturer Part Number: MP-13
• Pickup Style: Dead End (Termination)
• Bleed Hole: Yes
• Installation: In-tank mounting
• Application: Performance fuel cells and custom fuel systems

The Walbro TI Automotive 1250572 universal fuel pump inlet strainer, commonly known as a fuel sock, provides essential pre-filtration for high-performance fuel systems. This component is designed to protect the internal mechanisms of your fuel pump from tank debris and contaminants that can lead to premature wear, clogging, or pump failure.

Engineered by TI Automotive to complement their high-flow fuel modules and pumps, this universal strainer is ideal for custom fuel tank configurations or replacing worn OE-style socks during a pump upgrade. Its mesh construction ensures maximum surface area for fuel draw while maintaining the filtration integrity required for fuel system longevity.

• Manufacturer Part Number: 1250572
• Part Type: Fuel Pump Inlet Strainer (Fuel Sock)
• Application: Universal fitment for various aftermarket and performance fuel pumps
• Maintains consistent fuel flow while blocking harmful contaminants
• Genuine TI Automotive accessory for reliable system performance

Protect your high-performance fuel system with the Walbro 125-194 fuel filter sock. This in-tank strainer acts as the primary line of defense, filtering out large particulate matter and debris before it can enter the fuel pump or module. By preventing contaminants from reaching the pump internals, this filter sock reduces the risk of internal wear and premature component failure.

• Genuine TI Automotive / Walbro component for guaranteed compatibility
• Provides critical pre-filtration for fuel pump intake
• Designed for use with TI Automotive high-performance pumps and modules
• Essential for both standard replacements and custom fuel system installations
• Manufacturer Part Number: 125-194

The Walbro 125-190 is a universal fuel filter engineered by TI Automotive to protect high-performance fuel pumps and modules. This essential filtration component prevents debris and contaminants from entering the pump, ensuring long-term reliability and consistent fuel delivery in both standard and custom installations.

Designed as a versatile solution for performance fuel systems, this TI Automotive accessory integrates with their pump range to provide reliable filtration where OE solutions may not apply. Whether you are building a custom fuel cell or refreshing a high-output fuel system, the 125-190 provides the necessary protection to maintain fuel system integrity.

• Manufacturer Part Number: 125-190
• Engineered for TI Automotive fuel pumps and modules
• Essential for protecting pump internals from contaminants
• Suitable for custom fuel system configurations and universal applications
• Part of a full line of genuine TI Automotive installation accessories

Fits select 1982-1999 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac vehicles.

This genuine TI Automotive fuel filter sock is designed to protect your fuel system by preventing debris and contaminants from entering the fuel pump. As an essential first stage of filtration, this strainer helps maintain optimal fuel flow and extends the service life of high-performance fuel pumps and modules. Engineered to the exact specifications required by TI Automotive (formerly Walbro) fuel systems, the 125-157 strainer is a critical component for both standard maintenance and custom fuel system installations.

• Manufacturer Part Number: 125-157
• Direct-fit strainer for select GM EFI fuel pump modules
• Prevents pump damage from tank sediment and particulate matter
• Constructed from high-grade filtration media for maximum flow and durability
• Compatible with standard and high-output TI Automotive/Walbro fuel pumps

Protect your high-performance fuel pump with this genuine TI Automotive (Walbro) in-tank fuel filter strainer. As a critical component of your fuel system, this replacement filter prevents debris and tank contaminants from entering the pump, ensuring long-term reliability and maintaining stable fuel pressure for demanding applications.

This strainer is engineered specifically as a direct replacement for the component found in Walbro 400-791 fuel pump installation kits. Manufactured to rigorous OE-quality standards by TI Automotive, it provides the precise filtration surface area required for high-flow fuel modules without restricting flow.

• Direct replacement for the strainer in Walbro/TI Automotive kit 400-791
• High-efficiency filtration prevents premature fuel pump wear and failure
• Durable mesh construction designed for compatibility with modern fuel blends
• Critical for custom fuel system setups and routine pump maintenance
• Manufacturer Part Number: 125-155

Protect your fuel system's longevity with the Walbro 125-149 fuel pump inlet filter sock. Designed by TI Automotive as a critical pre-filtration component, this strainer prevents sediment and tank debris from entering the fuel pump, which can cause internal wear or premature failure in high-performance applications.

• Genuine TI Automotive accessory designed for Walbro fuel pumps and modules
• High-efficiency mesh construction for reliable contaminant filtration
• Ensures consistent fuel flow while protecting pump internals
• Ideal for both OE-style replacements and custom high-flow fuel system builds
• Manufacturer Part Number: 125-149

Protect your fuel system's integrity with this genuine TI Automotive Walbro fuel pump inlet filter sock. This strainer serves as the first line of defense for your fuel pump, capturing tank debris and sediment before it can enter the pump assembly. Maintaining a clean inlet filter is critical for preventing cavitation, reducing pump wear, and ensuring consistent fuel delivery in high-performance applications.

Engineered by TI Automotive as a direct-fit accessory for their performance fuel pumps and modules, the 125-147 filter sock is built to handle modern fuel chemistries. Whether you are refreshing a worn unit or completing a custom fuel system installation, using genuine TI Automotive components ensures the precise fitment and filtration required to safeguard your pump.

• Manufacturer Part Number: 125-147
• Part Type: Fuel Pump Inlet Strainer / Filter Sock
• Compatibility: Designed for use with TI Automotive and Walbro fuel pumps and modules
• Construction: High-flow mesh designed for maximum filtration with minimal restriction

Protect your fuel system's performance with this genuine TI Automotive Walbro fuel filter sock (MPN 125-142). As a critical inlet strainer for in-tank fuel pumps, this component serves as the primary line of defense against tank-born debris and large contaminants that can cause pump cavitation, internal wear, or premature failure.

• Genuine TI Automotive/Walbro replacement component ensures precise fitment and OEM-level filtration.
• High-flow mesh construction provides effective debris removal without restricting fuel volume.
• Specifically designed to seat securely on compatible TI Automotive fuel pump inlets.
• Helps maintain consistent fuel pressure by preventing intake blockages.
• Manufacturer Part Number: 125-142

Maintain your fuel system’s reliability and protect your high-performance pump with the TI Automotive 125-135B Replacement Fuel Filter. Designed as a genuine service component for TI Automotive and Walbro fuel pumps and modules, this inlet strainer acts as the primary defense against tank sediment and debris that can cause internal pump wear or failure.

• Genuine TI Automotive installation accessory
• Engineered for high-flow compatibility with Walbro fuel modules
• High-quality mesh construction captures contaminants before they enter the pump
• Essential for maintaining pump longevity in performance applications
• Manufacturer Part Number: 125-135B

The Walbro / TI Automotive 122-332 Sound Insulator is a specialized damping sleeve designed to minimize noise, vibration, and harshness (NVH) from high-performance fuel pumps. This genuine TI Automotive accessory wraps around the pump body to isolate it from mounting brackets or tank baffles, ensuring a quieter fuel delivery system without restricting performance.

• Reduces operational pump noise and vibration for a quieter cabin
• Genuine TI Automotive component designed for compatibility with performance fuel pumps
• Constructed from high-quality materials resistant to fuel submersion
• Essential for custom fuel system builds and direct replacement of worn OE isolators
• Manufacturer Part Number: 122-332

Fits 2011-2019 Ford F-250 and F-350 Super Duty trucks across all trim levels.

Maintaining a secure seal at the fuel pump module is essential for preserving fuel system pressure and preventing hazardous leaks or vapor emissions. The MAHLE Original GS33697 Fuel Pump Gasket is an OE-style replacement engineered to provide a precise, airtight seal between the fuel tank and the pump assembly. Constructed from high-grade elastomeric materials, this gasket is designed to withstand constant exposure to modern fuel blends without degrading or losing its compression set.

• Direct Replacement: Matches original equipment dimensions for a drop-in fit.
• Durable Seal: Resistant to gasoline, diesel, and additives to prevent premature failure.
• Critical Maintenance: Recommended for replacement whenever the fuel pump or fuel tank is serviced.
• Manufacturer Part Number: GS33697