Fits 2007-2018 Jeep Wrangler JK models.

Maintain the structural integrity and alignment of your front-end suspension with the Fox Track Bar Relocation Bolt Kit. Specifically engineered to work with track bar relocation brackets, this high-strength hardware kit ensures a secure mounting point, helping to correct steering geometry and prevent lateral axle shift on lifted Jeep JK applications.

Whether you are replacing worn factory fasteners or completing a fresh suspension install, this kit provides the necessary hardware for a robust connection at the track bar mount. It is built to withstand the rigors of off-road use and the increased leverage typical of high-clearance suspension systems.

• Fits all 2007-2018 Jeep Wrangler JK (2-Door & 4-Door)
• Engineered for use with track bar relocation brackets
• High-strength hardware for reliable suspension geometry
• Designed to meet Fox suspension mounting requirements
• Replaces critical mounting fasteners for increased durability

This Fox Shox mounting hardware is engineered to provide a secure, precision fit for shock absorbers utilizing a stem-style mounting interface. Designed to withstand the rigorous demands of both off-road and street use, this hardware kit ensures a rattle-free connection between the damper and the vehicle chassis, maintaining the integrity of your suspension's damping characteristics.

• Brand: Fox Shox
• Mounting Type: Stem Mount
• Stem Diameter: 0.500" (1/2-inch)
• Application: Replaces worn or damaged OE-style stem hardware
• Construction: High-strength materials for long-term durability and corrosion resistance

This Fox Shocks mounting sleeve provides a precision-engineered interface for shock absorber installation. Designed to seat within the shock eyelet bushing, it creates a rigid, durable pivot point that prevents the mounting bolt from over-compressing the bushing material, ensuring consistent suspension geometry and component longevity.

Constructed from 1020 steel, this sleeve is finished with a clear zinc plating to provide essential corrosion resistance against road grime and moisture. The specific tolerances ensure a secure fit for applications requiring a 0.560-inch internal clearance.

• Material: 1020 Steel
• Finish: Clear Zinc Plated
• Inner Diameter (ID): 0.560 in
• Outer Diameter (OD): 0.750 in
• Total Length (TLG): 1.313 in

This Fox internal retaining ring is a precision-engineered service component designed to secure internal assemblies within a 1.437-inch housing bore. Manufactured by Smalley to VH-143 specifications, this spiral-wound ring provides a continuous 360-degree retaining surface for maximum security and even load distribution.

Essential for high-performance shock rebuilds and maintenance, this ring ensures critical valving or seal components remain in their correct axial position under the extreme pressures and cycles of off-road suspension use. It replaces worn or damaged factory rings to restore the structural integrity of the damper assembly.

• Manufacturer: Smalley
• Series/Part Number: VH-143
• Housing Diameter: 1.437 in
• Type: Internal Retaining Ring
• Material: High-strength steel

This FOX -118 basic internal retaining snap ring is a precision hardware component designed to secure assemblies within a bore. It is engineered to seat into a machined groove, providing a reliable shoulder to hold bearings, seals, or other internal components in place under axial loads.

Constructed from PH 15-7 MO steel, this snap ring offers exceptional strength and fatigue resistance, making it suitable for the high-stress environments found in performance suspension systems. The gold zinc plating provides an additional layer of corrosion protection and allows for easy identification during service and assembly.

• Manufacturer: FOX
• Size: -118
• Material: PH 15-7 MO Steel
• Finish: Gold Zinc
• Type: Basic Internal Retaining Ring

Protect your suspension investment from trail debris and harsh environmental contaminants with the Fox Racing Shox 360-degree Shaft and Body Guard Wrap. This protective sleeve is engineered to shield both the shock shaft and the body from high-velocity rock chips, mud, and road salt that can lead to shaft pitting and premature seal failure.

• Provides complete 360-degree coverage for vulnerable shock components
• Total length: 14.5 inches (14.5 TLG)
• Helps maintain smooth shaft surfaces to extend the service life of internal seals
• Constructed from durable materials to withstand impacts and abrasion in off-road environments
• Essential for shocks mounted in high-exposure areas behind the wheels

Fits 2016 RAM models equipped with AMP Research PowerStep running boards.

Restore the structural integrity and smooth operation of your running boards with this genuine replacement hardware kit. Over time, original mounting fasteners can become lost or corroded due to road debris and weather exposure. This kit is the professional solution for replacing worn hardware during maintenance or re-installation, ensuring your PowerSteps remain securely anchored to the factory mounting points.

• Genuine AMP Research replacement hardware (MPN: 80-76139-90)
• Designed specifically for 2016 RAM PowerStep applications
• Includes all necessary nuts, bolts, and mounting fasteners
• High-strength components for long-term durability and safety

This AMP Research M8 x 22 hex rivet nut provides a high-strength, threaded mounting point in vehicle panels where rear-side access for a standard nut is restricted. Designed to create a permanent, load-bearing thread in thin-walled materials, this hardware is a critical component for secure accessory mounting.

The hexagonal body design is specifically engineered to prevent the nut from spinning or loosening within the mounting hole once installed, providing superior torque-out resistance compared to round rivet nuts. This component is commonly utilized in the installation and maintenance of AMP Research PowerStep and BedStep systems.

• Thread Size: M8
• Length: 22mm
• Body Profile: Hexagonal for anti-rotation stability
• Material: Heavy-duty steel with a corrosion-resistant finish
• MPN: 19-03829-90

Fits RWD Nissan SR20DET S13 engines. The ISR Performance OE Replacement Water Pump is a critical maintenance component designed to restore cooling system efficiency. As a direct-fit replacement for the factory unit, this pump ensures proper coolant circulation through the engine block and radiator to prevent overheating and maintain optimal operating temperatures.

• Manufacturer Part Number: OE-SR-WP-S13
• Direct OE-style fitment for RWD S13 SR20DET engine configurations
• Replaces worn or failing factory water pumps to prevent engine damage
• Cast housing designed for reliable coolant flow and durability
• Engineered for use with original factory mounting points

Fits Nissan S13 and S14 chassis equipped with the SR20DET engine.

Restore reliable ignition to your SR20DET with the ISR Performance OE Replacement Starter. Over time, factory starters can develop dead spots or solenoid failure, leading to the common clicking sound or a complete failure to crank. This unit is designed as a direct bolt-on replacement for the original equipment, ensuring your engine fires up consistently every time.

Built to meet or exceed original equipment specifications, this starter provides the necessary torque for quick engine turnover. It utilizes the factory mounting points and wiring connections, making it a straightforward replacement for worn components during a refresh or engine swap.

• Manufacturer Part Number: OE-SR-STARTER
• Direct OE replacement for SR20DET applications
• Engineered for Nissan S13 and S14 chassis fitment
• High-torque motor for reliable starting performance
• Bolts directly to factory mounting locations

Fits 1997-2018 Jeep Wrangler TJ, JK, and JKU models.

Restore the functionality of your rear glass with this Omix liftgate glass ball stud. Designed as a direct OE-style replacement, this hardware mounts through the liftgate glass and serves as the essential pivot point for the passenger-side gas strut. Precision-engineered to match factory tolerances, it replaces worn, rusted, or damaged hardware to ensure your liftgate operates smoothly and stays securely in the open position.

• Position: Right (Passenger Side)
• Direct fit replacement for factory part 4883496AA
• Heavy-duty steel construction with an OE-style finish for durability
• Provides a secure anchor point for the liftgate gas strut
• Simplified bolt-through installation on the liftgate glass
• Manufacturer Part Number: 12012.30
• Includes a limited 5-year warranty

Note: For the driver-side (left) ball stud replacement, please refer to Omix part number 12012.31.

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models equipped with the AMC 20 rear differential.

This Omix rear leaf spring perch pair is engineered to restore the structural integrity of your Jeep's rear suspension. Over time, original perches can suffer from corrosion or fatigue, leading to axle wrap or spring misalignment. These OE-style replacements provide a precise direct fit, ensuring your leaf springs are properly seated on the axle tube to maintain correct driveline angles and ride height.

• Direct replacement for factory OE part number MG-6280
• OE-style construction for reliable fitment and durability
• Dimensions: 2-1/2 in. x 5-13/16 in.
• Designed specifically for the AMC 20 rear axle housing
• Sold as a pair to service both sides of the rear axle
• Backed by a limited 5-year manufacturer warranty

For a comprehensive rear suspension overhaul, Omix recommends using these perches with leaf spring plates 18271.14 (left) and 18271.15 (right).

Fits select 1979-1986 Jeep CJ7 and Scrambler.

Maintain your vehicle's interior protection with this Omix floor drain plug kit. Over time, original factory plugs can become brittle, crack, or go missing during cleaning or trail rides, allowing moisture and road debris to enter the cabin. These direct-fit 1-inch plugs restore the seal in your floor pan, preventing water from splashing up from the road while remaining easily removable when you need to drain the tub after a deep cleaning or wet day on the trail.

Constructed to meet OE specifications for a secure press-fit, this kit is an essential component for any interior restoration or maintenance project. These plugs are manufactured from durable rubber compounds to ensure a long-lasting seal against the elements.

• Quantity: 4-Piece Kit
• Diameter: 1-Inch
• Fitment: Direct replacement for 1979-1986 Jeep CJ7 and 1981-1985 Scrambler models
• OE Reference: Replaces factory part number 4005695-4K
• Manufacturer Part Number: 12029.21

Ensure your engine's longevity with the Moroso magnetic drain plug (MPN 97006). This precision-machined plug is designed for high-performance applications, providing a reliable seal while actively protecting your internal components from premature wear.

• Magnetic Tip: Integrated high-strength magnet captures ferrous metal particles suspended in the oil, preventing them from recirculating through the engine.
• O-Ring Seal: Includes a durable O-ring for a positive, leak-free seal that eliminates the need for one-time-use crush washers.
• Thread Specifications: Features -8AN (3/4"-16) threads, common in aftermarket oil pans, dry sump tanks, and fluid reservoirs.
• Construction: Built for durability and repeated removals during service intervals.

The Moroso 97006 is a critical component for monitoring engine health; inspecting the magnetic tip during oil changes provides immediate visual feedback on internal wear. Manufacturer Part Number: 97006.

Vibrant Performance M22 Aluminum Crush Washers provide a reliable, leak-free seal for adapter fittings featuring a straight thread. These washers are specifically engineered for use when sealing a port that does not accommodate a standard O-ring gasket, ensuring a secure connection in automotive fluid transfer systems.

Constructed from high-grade aluminum, these crush washers are designed to deform slightly under torque to fill imperfections in the mating surfaces, creating a positive seal for oil, fuel, and coolant applications. They are highly recommended for use with Vibrant Performance AN adapter fittings and other metric straight-thread components.

• Material: High-grade Aluminum
• Thread Size: M22
• Quantity: 10 Pack
• Application: Straight thread metric adapter fittings and ports without O-ring seats
• Part Number: 20948

Vibrant Performance Aluminum Crush Washers are engineered to provide a reliable, leak-free seal for adapter fittings utilizing a straight thread. These washers are essential for sealing ports that are not machined to accommodate a standard O-ring gasket, providing a mechanical seal between the fitting and the port surface.

Constructed from high-quality aluminum, these washers are designed to deform slightly under torque to create a tight interface. This makes them a necessary component for custom automotive plumbing involving fuel, oil, and coolant systems where straight thread adapters are used.

• Thread Size: M8
• Material: Aluminum
• Quantity: 10 Pack
• Manufacturer Part Number: 20941
• Application: Straight thread ports without O-ring seats

Fits 1984-2001 Jeep Cherokee (XJ) and 1997-2006 Jeep Wrangler (TJ) all submodels.

Replace unreliable factory bar pins with the Zone Offroad Bar Pin Eliminator kit (ZONJ5022). Factory bar pins often allow the shock bushing to shift or clunk, particularly after lifting a vehicle or installing aftermarket shocks. This kit converts the upper shock mounting point to a high-strength double shear bracket, allowing you to use more common and durable eyelet-style shock bushings.

By properly pre-loading the upper shock bushing, these brackets eliminate the annoying rattling and clunking associated with worn OE mounts. The simple bolt-on design installs directly to factory mounting points with no welding required. This kit is an essential upgrade for Jeep owners looking to broaden their shock options and improve suspension reliability on the trail.

• Converts upper bar pin mounts to a secure double shear mounting bracket
• Pre-loads shock bushings to eliminate clunking and shifting
• Compatible with a wide range of eyelet-style shocks
• Straightforward bolt-on installation using factory hardware points
• Manufacturer Part Number: ZONJ5022
• Includes one pair of brackets

The Rock Slide Engineering EZ Plate provides a versatile solution for mounting your license plate directly to your vehicle's spare tire. This bracket is specifically designed to accommodate any tire size, ensuring your plate remains visible and legal after installing oversized off-road tires that often obscure factory mounting locations.

Constructed for durability in off-road environments and made in the USA, the EZ Plate (AC-EZ-LP) offers a universal fitment approach for rear-mounted spares. It provides a clean, centered mounting point that secures through the spare tire's wheel center or lug pattern.

• Universal design fits any size spare tire
• Relocates license plate for improved visibility and legal compliance
• Rugged construction designed for trail use
• Proudly made in the USA
• Manufacturer Part Number: AC-EZ-LP

Fits select 1988-2006 Jeep Wrangler models equipped with the Rugged Ridge 18676.60 Slip Yoke Eliminator (SYE) kit.

Restore the integrity of your driveline with this heavy-duty steel replacement yoke from Rugged Ridge. Specifically engineered as a service part for the NP231 18676.60 SYE kit, this yoke replaces a worn or damaged unit to maintain proper u-joint seating and torque transfer. Manufactured by Omix-ADA to precise tolerances, it ensures a direct-fit installation that matches the original kit specifications for reliable off-road performance.

• Exclusive Compatibility: Designed specifically for use with Rugged Ridge SYE kit part number 18676.60 only
• Durable Construction: Forged from high-strength steel to withstand the stresses of lifted suspension geometries
• Precision Engineering: Built to original Omix-ADA specifications for a reliable, direct replacement
• Manufacturer Part Number: 18676.61
• Warranty: Limited 5-year manufacturer warranty

The Rywire Large Mil-Spec Connector Plate provides a professional and secure mounting solution for bulkhead connectors. This 3x5-inch plate is engineered to provide a stable surface for firewall pass-throughs, ensuring your custom engine harness connectors remain fixed and protected against vibration and movement.

• Designed for large mil-spec bulkhead wiring connectors.
• Ensures a clean, organized firewall or chassis pass-through.
• Dimensions: 3.0 in x 5.0 in (Large).
• Ideal for motorsport and high-end custom wiring projects.
• Manufacturer Part Number: RY-PLATE-MIL-LARGE.

The sPOD Actuator Removal Tool (MPN 860000) is a purpose-built specialty tool designed to safely detach rocker actuators from Carling switch bodies. Attempting to pry these covers off with standard screwdrivers often results in marred plastic, broken tabs, or damage to the internal switch mechanism. This tool provides the correct leverage and contact points to release the actuator cleanly every time.

• Specifically engineered for Carling-style rocker switches
• Prevents cosmetic damage to switch covers and dash panels
• Essential for swapping custom laser-etched actuators or replacing worn covers
• Compact design for use in tight dashboard configurations and overhead consoles
• Manufacturer Part Number: 860000

The PRP Dual Button Push-To-Talk (PTT) Steering Wheel Plate provides a clean, secure mounting solution for communication or horn buttons without requiring permanent modifications to your steering wheel or hub. This plate is designed to be sandwiched between an aftermarket steering wheel and the hub adapter, positioning buttons within easy reach for immediate access while driving.

Engineered for broad compatibility, this plate features a dual-drilled design to accommodate the most common aftermarket mounting standards. It is pre-drilled for both the standard 6-bolt pattern (MOMO, Sparco, NRG) and the 5-bolt pattern (Grant). Please note that this product is designed specifically for aftermarket wheels and hubs and will not fit factory OEM steering wheels.

• Manufacturer Part Number: ODL-919251
• Mounting Patterns: Dual 6-bolt (MOMO-style) and 5-bolt (Grant-style) patterns
• Finish: Durable Matte Black powder coat
• Application: Mounts two PTT radio buttons, horn buttons, or accessory triggers
• Installation: Sandwich-style mount between steering wheel and hub; requires no drilling or modifications

Fits select 1972-1986 Jeep CJ5, CJ6, CJ7, and Scrambler models equipped with Dana 30, 35, or 44 differentials.

This Omix axle breather is an OE-style direct replacement designed to maintain proper differential ventilation. By allowing internal pressure to escape during heat cycles while preventing water and trail debris from entering the housing, this breather helps protect your gear oil and seals from contamination and premature failure. Engineered to factory specifications for a hassle-free installation on front differential applications.

• Direct fit replacement for original axle vent
• Compatible with Dana 30, 35, and 44 differentials
• Durable construction to withstand off-road conditions
• Manufacturer Part Number: 16561.01
• Replaces OE Number: 5352955
• Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited models, including Rubicon, Sahara, Sport, and X.

The PRP Seats C38 Front Seat Adapter Mount provides a straightforward solution for installing aftermarket PRP suspension seats into your Jeep Wrangler JK. These brackets are engineered to bolt directly onto your factory seat pedestal and slider, allowing you to maintain most OEM seat adjustment functions while upgrading to superior off-road seating performance.

Each mount is pre-drilled specifically for standard-width PRP suspension seats, ensuring a precise fit without the need for custom fabrication. Please note that these adapters are designed for use with 4-point or 5-point harnesses and do not integrate with factory seat belt components.

• Fits all standard-width PRP suspension seats
• Compatible with factory seat pedestals and sliders to maintain seat movement
• Bolt-on installation requires no permanent modifications to the vehicle
• Designed for use with 4-point or 5-point off-road harnesses
• Sold as a single unit to mount one front seat
• Manufacturer Part Number: C38

Vibrant Performance M10 Aluminum Crush Washers are engineered to provide a reliable, leak-free seal for straight-thread adapter fittings in ports that do not feature an O-ring groove. These washers are essential for fluid systems including fuel, oil, and coolant, where a secure interface is required. The deformable aluminum construction allows the washer to conform to the surface of the port and the fitting flange under torque, effectively sealing off potential leak paths.

• Manufacturer Part Number: 20942
• Thread Size: M10
• Material: Aluminum
• Application: Straight-thread ports without O-ring gaskets
• Quantity: Pack of 10 washers

Fits 2007-2018 Jeep Wrangler JK models.

Restore the smooth operation and alignment of your rear glass liftgate with the Kentrol Liftgate Hinge Pair. These heavy-duty hinges are designed as a direct-fit replacement for worn, corroded, or sagging factory hardware on the JK chassis. Supplied in a bare grey finish, they provide a clean look out of the box or can be prepped and painted to match your vehicle's exterior color.

• Direct replacement for factory rear glass liftgate hinges
• Precision-engineered for 2007-2018 Jeep Wrangler JK fitment
• Durable construction maintains liftgate alignment and seal integrity
• Bare grey finish provides corrosion resistance and a paintable surface
• Sold as a complete pair (2 hinges)
• Manufacturer Part Number: 30016

This HKS Cylinder Liner (2399-RN001) is engineered specifically for high-performance Nissan SR20 engine builds. Whether you are restoring a block with damaged cylinder walls or reinforcing the engine to handle increased boost and thermal loads, these liners provide the dimensional stability and wear resistance required for demanding motorsport applications.

Designed for precision fitment, these sleeves replace the factory bore surface to ensure a high-strength cylinder wall that maintains its roundness under extreme combustion pressures. This is an essential component for builders looking to push the SR20 platform beyond factory limits while maintaining long-term reliability.

• Compatible with Nissan SR20 series engines
• Provides a durable, high-strength bore surface for high-power applications
• Essential for block restoration and performance reinforcement
• Requires professional machining for installation and interference fit
• Manufacturer Part Number: 2399-RN001

Secure your suspension components with the Fox 213-63-008 Bar Pin. This heavy-duty mounting hardware is designed to provide a reliable attachment point for shock absorbers, ensuring proper alignment and performance under load. Machined from high-strength 1045 steel, it offers the structural integrity required for demanding automotive and off-road applications.

The bar pin features a corrosion-resistant zinc plating to protect against road salt and moisture, extending the service life of your suspension assembly. With a standard 3.5-inch hole-to-hole spacing and M12 x 1.75 threaded holes, it is built to precise tolerances for a straightforward installation.

• Manufacturer Part Number: 213-63-008
• Material: 1045 Steel
• Finish: Zinc Plated
• Outer Diameter: 0.750 in.
• Total Length: 4.38 in.
• Mounting Spacing: 3.5 in.
• Thread Size: M12 x 1.75

The Rhino-Rack Vortex Secure Core Locking End Caps (VA-SEC4) provide an essential layer of security for your roof rack system. Designed as the standard replacement or upgrade for Vortex crossbars, these end caps utilize a Secure Core locking mechanism to prevent the unauthorized removal of T-slot mounted accessories. Whether you are hauling bike racks, kayak carriers, or cargo boxes, these caps ensure your gear stays safely attached to the vehicle.

Constructed from durable, UV-stabilized materials to withstand harsh weather, this set includes four end caps and two keys for complete coverage of a two-bar system. These caps slide directly into the factory mounting points at the ends of the Vortex bar profile for a clean, integrated look.

• Specifically designed to fit Rhino-Rack Vortex crossbars
• Secure Core locking mechanism protects T-slot mounted accessories from theft
• Includes 4 locking end caps and 2 keys
• Manufacturer Part Number: VA-SEC4
• Backed by a 5-year warranty

Engineered for high-stress internal engine environments, this ARP 3/8-24 12-point connecting rod bolt provides the superior clamping force and fatigue resistance necessary for performance rotating assemblies. Designed to replace standard hardware with precision-engineered fasteners, it ensures the integrity of the rod cap under high-RPM loads.

• Manufacturer Part Number: 3AJ1.850-2C
• Thread Size: 3/8-24
• Head Style: 12-Point
• Under Head Length (UHL): 1.850 in
• Quantity: Single bolt