Fits 2013-2018 Ram 2500 and 3500 (6.7L) submodels including Big Horn, Laramie, Limited, SLT, and Tradesman.

The CSF Heavy Duty Bar & Plate Intercooler is a direct replacement for the factory unit on 2013-2018 Ram 6.7L Turbo Diesel trucks. Engineered for high-boost applications and heavy towing, this intercooler features all-aluminum cast end tanks and a heavy-duty bar and plate core. Each unit is pressure tested at 120 psi to ensure structural integrity and maximum reliability under extreme load. To further enhance efficiency, the core is finished in CSF's Thermal Rejection Powder Coating, which provides up to a 15% improvement in heat dissipation over non-coated units.

• Heavy-duty bar and plate core construction for superior durability
• All-aluminum cast end tanks with precise "Quick-Connect" inlet/outlet connections
• High-density internal and external fin design for maximum cooling surface area
• Thermal Rejection Powder Coating for enhanced heat dissipation and corrosion resistance
• True "Drop-in Fit" installation requires no vehicle modifications
• Pressure tested to 120 psi for high-performance reliability
• Manufacturer Part Number: 6076

Fits 2003-2009 Dodge Ram 3500 (6.7L).

The CSF 6072 is a direct-fit replacement intercooler engineered to restore factory cooling efficiency to your heavy-duty Dodge Ram. Designed as a drop-in solution for worn, leaking, or damaged factory units, this intercooler ensures your 6.7L Cummins maintains optimal intake air temperatures (IATs) and manageable exhaust gas temperatures (EGTs) during towing and daily operation.

Built to precise OE dimensions, this unit bolts directly to the factory mounting points and connects seamlessly with original charge air cooler (CAC) hoses. Its construction is tested to withstand the thermal cycling and boost pressures common in heavy-duty diesel applications.

• Direct-fit OE replacement for a simplified installation
• Restores cooling performance and airflow efficiency
• Engineered to meet or exceed manufacturer specifications
• Compatible with factory radiator support and hardware
• Manufacturer Part Number: 6072

Fits 2013-2019 Ram 1500 (3.0L).

Maintain optimal intake air temperatures and consistent boost pressure with the CSF 6066 OE-style replacement intercooler. This charge air cooler is engineered as a direct drop-in solution for the 2013-2019 Ram 1500 3.0L, restoring factory-level cooling performance by replacing a leaking, clogged, or heat-damaged original unit.

CSF manufactured this intercooler to exacting tolerances to ensure a straightforward installation that utilizes the factory mounting points and plumbing connections. Built to withstand the thermal cycles and pressures of daily driving, this unit is a reliable replacement for EcoDiesel owners looking to maintain engine health and efficiency.

• Direct-fit replacement for the original equipment charge air cooler
• Restores cooling efficiency to factory specifications
• Precision manufactured for reliable fitment and pressure retention
• Uses factory mounting points for a hassle-free installation
• Manufacturer Part Number: 6066

Fits 2011 Saab models (2.0L).

Maintain optimal intake air temperatures and restore your vehicle's factory performance with this CSF replacement intercooler. Engineered as a direct-fit alternative to the original equipment, this unit ensures your turbocharger system operates efficiently by eliminating the boost leaks and heat soak common in aged or damaged factory cores.

• Direct-fit design matches OE dimensions for a seamless, drop-in installation
• Utilizes factory mounting points and connections with no modifications required
• Manufactured to meet or exceed OEM specifications for cooling efficiency and pressure resistance
• Restores turbocharger performance, throttle response, and fuel economy
• Manufacturer Part Number: 6059

Fits 2000-2003 Ford Excursion (7.3L).

The CSF 6017 is a precision-engineered OEM replacement intercooler designed to restore factory cooling efficiency to your Power Stroke diesel. Built to meet or exceed original equipment standards, this unit provides a direct-fit solution for leaking or damaged factory intercoolers, ensuring your 7.3L engine receives properly cooled intake air for optimal combustion and EGT management.

• Direct Fit: Designed to drop into the factory location using original mounting points and hose connections for a hassle-free installation.
• OE Quality: Manufactured to match factory dimensions, airflow ratings, and heat dissipation specifications.
• Durable Construction: Engineered to withstand the boost pressures and thermal cycling common in heavy-duty diesel applications.
• Reliability: Helps maintain engine performance and fuel efficiency by keeping intake temperatures within the intended operating range.
• Part Number: 6017

Fits select 2010-2019 Ford Flex, Taurus, Lincoln MKS, and MKT (3.5L).

The CSF 6015 Replacement Intercooler is engineered to restore factory cooling performance for your EcoBoost engine. Designed as a direct drop-in replacement for the original equipment, this unit addresses common issues like heat soak, internal clogging, or core damage that can compromise power and fuel economy. It bolts directly to factory mounting points and connects to existing charge pipes for a hassle-free installation.

• Direct-fit OE replacement for a seamless installation
• Restores heat dissipation efficiency to protect against power loss
• Built to meet or exceed original equipment standards for durability
• Maintains factory intake air temperatures for consistent performance
• Manufacturer Part Number: 6015

Fits 2003-2005 Ford Excursion (6.0L).

The CSF 6013 is a precision-engineered, direct-fit OEM replacement intercooler designed to restore factory cooling performance and boost integrity for your Power Stroke diesel. This unit serves as a reliable solution for replacing factory intercoolers that have developed leaks at the end tanks or suffered physical damage, ensuring your intake air temperatures remain within optimal operating range.

• Drop-in fitment using all original mounting points and factory hose connections
• Built to meet or exceed OE specifications for core thickness and airflow capacity
• Designed to withstand the high boost pressures common in the 6.0L diesel application
• Rigorous leak testing ensures long-term durability and pressure retention
• Manufacturer Part Number: 6013

Fits 2008-2010 Ford F-250 Super Duty (6.4L).

The CSF 6012 Intercooler is a precision-engineered OEM replacement designed to restore the cooling performance of your Power Stroke diesel engine. Engineered to match factory specifications, this unit replaces worn, cracked, or leaking stock intercoolers to ensure consistent intake air temperatures and proper turbocharger efficiency. It utilizes original mounting points and connections for a seamless, drop-in installation.

• Direct-fit replacement for the factory intercooler (MPN 6012)
• Maintains original equipment airflow and heat dissipation standards
• Engineered to handle the thermal loads and boost pressures of the 6.4L engine
• Compatible with all factory mounting hardware and piping

This CSF OEM Replacement Intercooler is engineered to restore factory cooling performance to your 2005-2009 Dodge Ram 2500 equipped with the 5.9L Cummins diesel engine. As a direct-fit replacement for a leaking, heat-soaked, or debris-clogged factory unit, it ensures your turbocharger maintains optimal intake air temperatures for consistent engine efficiency and power delivery.

Built to meet or exceed original equipment specifications, this charge air cooler features a robust core design and durable construction to handle the sustained boost pressures of the 5.9L power plant. It is designed for a drop-in installation, utilizing all factory mounting points and hose connections for a seamless fit without requiring modifications.

• Direct-fit OE replacement for 2005-2009 Dodge Ram 2500 (5.9L)
• Restores critical charge air cooling efficiency for reliable turbo performance
• Precision engineered for leak-free operation and factory-level durability
• Manufacturer Part Number: 6009

Fits the 2001 Chevrolet Silverado 2500HD (6.6L).

The CSF 6007 is a direct-fit OEM replacement intercooler designed to restore factory cooling efficiency to your heavy-duty diesel system. This charge air cooler replaces a leaking or heat-soaked factory unit, ensuring intake air temperatures remain within optimal ranges for combustion and power. Built to handle the high-boost pressures typical of the 6.6L Duramax application, this unit bolts directly into factory mounting points without the need for modification.

• Direct-fit replacement for standard factory intercooler
• Built to match original equipment thermal and pressure specifications
• Durable construction for reliable service in heavy-duty towing and hauling
• Maintains optimal charge air density for engine performance
• Manufacturer Part Number: 6007

Fits 2006-2010 GMC Sierra 2500HD (6.6L).

The CSF 6002 OE Replacement Intercooler is a direct-fit solution designed to restore the intake cooling efficiency of your Duramax-equipped GMC Sierra. Over time, factory intercoolers can develop leaks or suffer from core degradation, leading to higher exhaust gas temperatures (EGTs) and reduced engine performance. This unit is built to match original equipment specifications, ensuring a reliable seal and efficient heat dissipation under standard operating conditions.

• Direct replacement for a precise fit into the factory mounting points
• Heavy-duty construction designed to withstand boost pressure and thermal cycling
• Restores cooling capacity to prevent heat soak during towing or heavy-load cycles
• Designed for straightforward installation without the need for custom fabrication
• Manufacturer Part Number: 6002

Fits 2011-2016 GMC Sierra 2500HD (6.6L).

Restore your vehicle's thermal efficiency with the CSF OE-style replacement intercooler. This unit is specifically engineered to replace a leaking, clogged, or damaged factory intercooler on the 6.6L Duramax platform. Designed for a direct drop-in fit, it utilizes all factory mounting points and connections to ensure a seamless installation without the need for modifications.

Built to handle the high boost pressures and operating temperatures of heavy-duty diesel applications, this intercooler provides consistent intake air cooling for optimal engine performance and longevity. Every unit is manufactured to precise tolerances to meet or exceed factory cooling standards.

• Direct OE-style replacement for a hassle-free, drop-in installation
• Manufactured with heavy-duty materials to withstand high thermal stress
• Restores factory cooling performance and intake airflow
• Manufacturer Part Number: 6001

Fits 2010-2012 Ram 2500 (6.7L).

The CSF 6000 OEM Replacement Intercooler is engineered to restore the factory cooling efficiency and performance of your heavy-duty diesel truck. This direct-fit replacement is designed to address common issues with aged or damaged factory charge air coolers, such as boost leaks or internal clogs. By utilizing original equipment dimensions, this unit ensures a straightforward installation without the need for custom fabrication.

• Direct bolt-on replacement for a hassle-free install
• Precision-engineered to meet or exceed factory thermal performance
• Maintains factory mounting points, brackets, and hose connections
• Durable construction designed to withstand the boost pressures of the 6.7L engine
• Manufacturer Part Number: 6000

Fits select 2018-2024 Audi SQ5 and SQ5 Sportback (3.0T).

The AWE ColdFront Intercooler (MPN 4510-11062) provides a massive thermal cooling upgrade for the B9-platform SQ5. Designed to combat heat soak and maintain consistent engine output during spirited driving or increased boost levels, this unit replaces the restrictive factory unit with a heavy-duty bar and plate aluminum core. With a 130% increase in frontal surface area and an 83% increase in volume over stock, it significantly lowers intake air temperatures (IATs) while minimizing pressure drop across the system.

Construction features cast aluminum end tanks with integrated internal baffling to ensure even airflow across the entire core. Each assembly is CAD-designed and CFD-tested for optimized flow paths and then TIG-welded and pressure-tested for reliability. Installation is a straightforward bolt-on process that fits securely behind the stock crash bar and reuses the factory intercooler hoses and clamps with no cutting required.

• 130% increase in frontal surface area and 83% increase in volume over OE
• Efficient bar and plate aluminum core construction
• Cast aluminum end tanks with internal baffling for optimized flow
• CAD-designed and CFD-tested for maximum cooling efficiency
• TIG-welded and pressure-tested for long-term durability
• Maintains factory radiator and A/C system performance
• AWE No Check Engine Light (CEL) Guarantee
• Direct bolt-on fitment using factory hoses and clamps
• Manufacturer Part Number: 4510-11062

Fits select 2017-2024 Audi A4, A4 Quattro, A4 allroad, A5 Quattro, S4, S5, and S5 Sportback models (2.0T / 3.0T).

The AWE ColdFront Intercooler is engineered to combat heat soak and maintain consistent power delivery on the Audi B9 platform. Featuring a robust bar and plate aluminum core, this kit provides a 130% increase in frontal surface area and a massive 83% increase in core volume over the factory unit. Whether running stock boost or high-output software, the ColdFront Intercooler reduces intake air temperatures (IATs) and minimizes pressure drop for sustained performance in all driving conditions.

This intercooler utilizes cast aluminum end tanks with integrated internal baffling, CAD-designed and CFD-tested to ensure uniform airflow across the entire core. The assembly is TIG welded and pressure tested for maximum durability. Designed for a straightforward installation, it fits securely behind the factory crash bar using a pure bolt-on design that requires no cutting and reuses the OE hoses and clamps.

• Manufacturer Part Number: 4510-11060
• 83% increase in internal core volume over stock
• 130% increase in frontal surface area for improved heat dissipation
• Efficient bar and plate core construction
• Cast aluminum end tanks with internal flow baffling
• Retains factory radiator and A/C system efficiency
• No Check Engine Light (CEL) guarantee
• No cutting required for installation

Fits 2014-2019 Porsche 911 Turbo and Turbo S models.

The AWE ColdFront Intercooler Kit is a high-performance charge air solution engineered to eliminate heat soak and maximize cooling efficiency on the Porsche 991 chassis. Featuring massive 523 cubic inch cores—a 17% increase in volume over the factory units—this kit utilizes a high-flow bar and plate design specifically tailored for high-boost applications. To accommodate the increased core size, AWE includes custom-engineered carbon fiber ducts that seamlessly mate to the rear fender intakes, ensuring optimal airflow without requiring any trimming or cutting of the vehicle bodywork.

This kit replaces restrictive factory components with precision-cast and machined end tanks designed for smooth internal airflow. The system is plumbed with 6-ply Nomex-braided silicone hoses, which offer superior burst strength compared to standard polyester-reinforced hoses. These hoses feature a molded lip to retain the factory locking mechanism at the turbos and are secured by stainless steel high-force T-bolt clamps. Real-world testing demonstrates a 32°F drop in intake air temperatures and a 50% reduction in pressure drop, supporting dyno-verified gains of up to 26 HP and 21 lb-ft of torque at the crank when used with supporting modifications.

• Direct bolt-on fitment for 2014-2019 Porsche 911 Turbo/Turbo S
• 17% larger core volume (523 cubic inches vs 448 cubic inches stock)
• Bar and plate core design with increased fin density
• Includes bespoke carbon fiber air ducts for maximum flow
• 6-ply Nomex-reinforced silicone hoses and stainless T-bolt clamps
• Reduces intake air temperatures by up to 32°F
• 50% decrease in pressure drop through the intercooler cores
• No-cut installation with AWE Fitment Guarantee
• Manufacturer Part Number: 4510-11050

Fits select 2000-2004 Audi S4, A6, and Allroad Quattro models (2.7T).

The AWE Tuning Performance Intercooler Kit is engineered to eliminate the core restriction inherent in factory side-mount units. Unlike RS4 intercooler retrofits which require extensive vehicle modification and custom trimming, this kit is specifically designed to fit the US-spec B5 and C5 chassis. The result is a cleaner installation that takes less than half the labor time of a typical RS4 swap.

Efficiency is maximized through the use of custom carbon fiber shrouds, ensuring 100% coverage of the core face. This design forces cooling air directly through the core rather than allowing it to escape through gaps. For high-boost applications, this reduced core restriction prevents the heat soak and pressure drops that negate power gains. Note that minimal trimming of the bumper and shrouds is required for A6 and Allroad fitment. This kit is intended for racing use only.

• High-efficiency air-to-air side-mount design
• Lightweight AWE carbon fiber shrouds for optimized airflow
• Maximum core dimensions possible within the factory mounting locations
• Secure mounting that supports the cores and retains the engine belly tray
• No Check Engine Light (CEL) guarantee
• Manufacturer Part Number: 4510-11040

Upgrade the charge air cooling on your 2022+ Subaru WRX with the AMS Performance Top Mount Intercooler. This essential component replaces the factory intercooler, addressing a critical bottleneck in turbocharged engine performance by significantly reducing intake air temperatures.

A more efficient intercooler ensures denser, cooler air enters your WRX's engine. This translates to more consistent power delivery, reduced risk of pre-ignition or knock under aggressive driving conditions, and improved overall engine reliability, especially during sustained high-boost operation or spirited driving. The AMS Performance design focuses on maximizing heat dissipation and optimizing airflow through the core to combat heat soak effectively.

Key Features:

• Direct replacement for the OEM top mount intercooler
• Engineered to reduce intake air temperatures for improved performance
• Enhances power consistency and engine reliability under boost
• Manufacturer Part Number: AMS.50.09.0001-1

Designed for BMW G8X M2, M3, and M4 models equipped with the S58 engine, this AMS Performance S58 Heat Exchanger is a crucial upgrade for maintaining optimal intake air temperatures and consistent power output.

The factory cooling system can struggle to dissipate heat effectively during aggressive driving or track use, leading to heat soak and reduced engine performance. This performance heat exchanger helps to combat that by efficiently dissipating heat from the charge air cooling system, ensuring your S58 engine performs at its peak.

• Increased core volume for enhanced thermal efficiency
• Robust construction designed for demanding conditions
• Limited Edition M Color logo for a distinctive aesthetic

Manufacturer Part Number: AMS.48.02.0001-2

The AMS Performance Heat Exchanger is specifically engineered for BMW G8X M2, M3, and M4 models equipped with the S58 twin-turbocharged engine.

This upgraded heat exchanger is designed to improve the cooling efficiency of the S58 engine's charge air system. By increasing the thermal capacity, it helps to more effectively dissipate heat from the intercooler coolant circuit, combating heat soak that can reduce power output during aggressive driving or extended track sessions. Maintaining lower and more consistent intake air temperatures ensures optimal engine performance and reliability.

• Engineered for BMW G8X M2, M3, and M4 (S58 engine)
• Optimizes charge air cooling system performance
• Helps prevent heat soak and power loss
• Features a distinctive Black Logo design
• Manufacturer Part Number: AMS.48.02.0001-1

Upgrade your 2023+ Nissan Z's forced induction system with AMS Performance Intercoolers, specifically engineered for the VR30 engine. These direct-fit intercoolers are designed to replace the factory units, addressing common issues like heat soak and elevated intake air temperatures that can rob your turbocharged Z of power, especially during spirited driving or track use.

Intercoolers play a critical role in any turbocharged application by cooling the compressed charge air from the turbochargers before it enters the engine. Cooler air is denser, allowing for more oxygen to be delivered to the combustion chambers, which translates to increased horsepower and torque while also reducing the risk of detonation. AMS Performance units are known for their:

• Enhanced charge air cooling efficiency
• Reduced pressure drop across the core
• Robust construction for sustained performance
• Direct replacement for OEM intercoolers

By effectively managing intake temperatures, these intercoolers help maintain consistent power delivery, safeguard engine longevity, and unlock the full potential of your VR30-powered Nissan Z. Manufacturer Part Number: AMS.47.09.0001-1.

Fits 2015-2021 Subaru WRX Base, Limited, and Premium models equipped with the FA20 engine.

Maintain maximum power output and combat heat soak with the AMS Performance Front Mount Intercooler (FMIC) Kit. Whether you are navigating high-ambient temperatures, drag racing, or performing high-speed pulls, this kit is engineered to significantly lower intake air temperatures. By relocating the intercooler to the front of the vehicle, you ensure your FA20 engine receives the coolest air possible regardless of driving conditions.

The centerpiece of this kit is a massive 28.5-inch wide core designed to completely fill the front bumper opening, maximizing airflow across the cooling fins. Each intercooler features robust aluminum end tanks and is hand TIG-welded to ensure a precise fit and superior structural integrity. To guarantee performance under high-boost applications, every unit is pressure tested for leaks and durability.

• Core Dimensions: 28.5-inch width for maximum surface area
• Material: High-quality aluminum end tanks
• Manufacturing: Hand TIG-welded construction
• Testing: Factory pressure tested to ensure zero leaks
• Configuration: This kit is supplied without a replacement bumper beam
• Manufacturer Part Number: AMS.36.09.0001-6

The AMS Performance Front Mount Intercooler (FMIC) Kit for the 2015-2021 Subaru WRX is engineered to eliminate heat soak and maintain maximum power output during high-load scenarios like drag racing, airstrip pulls, or spirited driving in hot climates. By relocating the intercooler to the front bumper opening, this kit ensures a consistent supply of ambient air reaches the FA20 engine's intake tract for lower charge air temperatures.

Constructed with durability and flow in mind, this kit features cast aluminum end tanks and a massive 28.5-inch wide core designed to utilize the entire front bumper opening for maximum airflow. Every unit is hand TIG welded and pressure tested to ensure a leak-free seal under high boost. The included bumper beam allows for a secure installation while maintaining the structural requirements for the intercooler mounting points.

• Fits 2015-2021 Subaru WRX (Base, Limited, Premium)
• Massive 28.5" wide core fills the bumper opening for maximum cooling
• Custom cast aluminum end tanks for optimized internal airflow
• Hand TIG welded for superior strength and fitment
• Includes replacement bumper beam for intercooler integration
• Pressure tested to ensure maximum performance and durability
• Manufacturer Part Number: AMS.36.09.0001-5

The AMS Performance Bumper Support Beam is a precision-engineered component for 2015-2021 Subaru WRX Base, Limited, and Premium models equipped with the FA20 engine. This beam is essential for securing the front mount intercooler (FMIC) system, ensuring lower intake temperatures and maintaining maximum power output during drag racing, airstrip pulls, or driving in hot climates.

Constructed for durability and a perfect fit, this support beam accommodates the massive 28.5-inch wide AMS intercooler core that fills the front bumper opening for optimized airflow. Every unit is hand TIG-welded and pressure-tested to meet the high standards required for performance turbo applications.

• Fits 2015-2021 Subaru WRX (Base, Limited, and Premium)
• Engineered for use with the AMS Performance 28.5-inch wide FMIC core
• Hand TIG-welded construction for maximum strength and precise fitment
• Pressure tested to ensure long-term reliability and performance
• Supports aluminum end tank intercooler configurations
• Manufacturer Part Number: AMS.36.09.0001-3

Fits 2015-2021 Subaru WRX Base, Limited, and Premium models (FA20).

Designed to combat heat soak in high-stress environments, the AMS Performance Front Mount Intercooler is an essential upgrade for the 2015-2021 Subaru WRX. Whether you are navigating hot climates, drag racing, or performing high-speed pulls, this intercooler maintains lower intake air temperatures (IATs) to preserve your FA20 engine's maximum power output. The massive 28.5-inch wide core is engineered to utilize the entire front bumper opening, ensuring optimal airflow and cooling efficiency.

Built for durability and performance, each unit features cast aluminum end tanks and is hand TIG welded by specialists. Every intercooler is pressure tested before leaving the facility to ensure leak-free operation under high boost levels.

• Massive 28.5-inch wide core for maximum cooling surface area
• Robust aluminum end tanks for improved pressure handling
• Precision hand TIG welded construction
• Pressure tested for maximum reliability and performance
• Intercooler core only; part number: AMS.36.09.0001-1

Fits 2015-2019 Volkswagen Golf R Base (MK7).

The AMS Performance Front Mount Intercooler Upgrade is engineered to solve the heat soak issues common with the factory MK7 cooling system. By replacing the restrictive stock unit with a high-efficiency core, this upgrade significantly reduces intake air temperatures (IATs) to maintain consistent power delivery during aggressive driving or high-boost applications. This kit is designed as a direct bolt-on solution, utilizing factory mounting points for a clean, reliable installation.

A key feature of this kit is the purpose-built cast aluminum end tanks. Unlike welded sheet metal designs, these cast tanks provide smooth, aerodynamically optimized internal transitions to minimize pressure drop and ensure even airflow across the entire core surface. This robust construction ensures the intercooler can handle the increased pressures of tuned TSI engines without the risk of failure.

• Direct bolt-on fitment using factory mounting locations
• High-efficiency intercooler core for maximum heat dissipation
• Precision-engineered cast aluminum end tanks for optimized internal airflow
• Designed specifically for the MK7 Volkswagen Golf R chassis
• Complete hardware kit included for installation
• Manufacturer Part Number: AMS.21.09.0001-1

Fits 2008-2015 Mitsubishi Lancer Evolution X (GSR, MR, MR Touring, SE, and Final Edition).

The AMS Performance Front Mount Intercooler (FMIC) is engineered to provide superior cooling efficiency and reduced pressure drop for the Evo X platform. By replacing the restrictive factory unit, this intercooler allows for consistent power delivery by maintaining lower intake air temperatures even under high-boost conditions.

Constructed with modular cast aluminum end tanks, this design ensures smooth, non-turbulent airflow that sheet metal tanks cannot replicate. The robust casting also provides increased strength to handle extreme boost levels without the risk of weld failure. Each unit features the iconic AMS logo stenciled on the core for a distinct performance look.

• Direct-fit for 2008-2015 Mitsubishi Lancer Evolution X
• Modular cast aluminum end tanks for optimized internal airflow
• Significant increase in core surface area over the OEM unit
• Stenciled AMS logo on core face
• Manufacturer Part Number: AMS.04.09.0001-1

Fits 2017-2025 Ford F-150 Raptor models.

The Addictive Desert Designs intercooler upgrade kit, developed in partnership with aFe Power (Advanced FLOW Engineering), provides a high-efficiency cooling solution specifically designed to integrate with ADD winch mount and frame-cut bumpers. This kit relocates the intercooler to accommodate winch configurations while improving thermal management and airflow.

Engineering for durability and performance, the assembly features a 100% TIG-welded 18-core main assembly. The core sits on a heavy-duty welded steel mounting beam designed to withstand the stresses of off-road use. This system is a direct bolt-on replacement that retains all factory OEM sensors and functions, ensuring no loss of vehicle telemetry or diagnostic capabilities.

• Manufacturer Part Number: IC1650KIT-S
• 8.5% increase in flow compared to leading aftermarket competitors
• 100% TIG-welded construction for maximum pressure resilience
• 18-core main assembly for superior heat dissipation
• Integrated welded steel mounting beam for off-road structural integrity
• Direct bolt-on installation; no sensor modification required
• Designed specifically for use with ADD winch mount and frame-cut front bumpers

Fits 2017-2020 Ford F-150 and Raptor models. This Addictive Desert Designs aFe Intercooler Upgrade Kit (MPN: IC1650KIT) is specifically engineered to solve a common fitment challenge: relocating the factory intercooler to provide the necessary clearance for ADD winch-capable front bumpers. By repositioning the intercooler, this kit allows you to equip your truck with a heavy-duty recovery winch without sacrificing cooling efficiency or airflow.

• Relocates intercooler to allow for ADD Winch Front Bumper installation
• Designed as a direct bolt-on upgrade to simplify the installation process
• Maximizes airflow to maintain and enhance horsepower and torque performance
• Specifically built to integrate with aFe cooling components
• Manufacturer Part Number: IC1650KIT

Fits 1994-2002 Dodge Ram 2500 and 3500 (L6-5.9L). This aFe BladeRunner Street Series intercooler and tube kit replaces the restrictive factory cooling system with a high-efficiency 3-inch bar and plate design, engineered to outperform standard tube and fin cores. The end tanks are constructed from 3/16-inch TIG-welded aluminum plate and feature three internal multi-directional vanes that distribute airflow evenly across the entire core for maximum heat dissipation.

Constructed for high-boost applications, this intercooler is pressure-tested at 200 psi. In performance testing, this system achieved a 200-degree temperature drop, reduced EGTs by 100 degrees, and increased airflow by 30% over stock components. The kit includes stainless steel tubes for superior heat resistance and billet aluminum factory-style quick-connect adapters for a secure fit without drilling or cutting.

• 3-inch bar and plate core design
• 3/16-inch TIG-welded aluminum end tanks with internal flow vanes
• Stainless steel intake tubes for heat resistance and durability
• Four 1/8-inch NPT pre-tapped ports for gauges or auxiliary inputs
• 2-1/2 inch inlet and 3-inch outlet
• Billet aluminum factory-style quick-connects
• Laser-cut aFe Power logo plates
• Manufacturer Part Number: 46-21062-B