Fits 2007-2018 Jeep Wrangler and Wrangler JK Unlimited 4-Door models.

The JKS J-Venture suspension system delivers a 3.5-inch lift to increase ground clearance and accommodate larger tires while maintaining a perfect balance of on-road comfort and off-road capability. Designed for right-hand-drive (RHD) JK Wranglers, this system features custom-tuned dual-rate coil springs paired with FOX 2.0 Performance Series IFP shocks. These components are specifically valved to improve ride quality and handling over any terrain, ensuring a controlled, low-maintenance suspension solution.

• FOX 2.0 Performance Series IFP shocks specifically valved for this system to improve damping performance.
• Front and rear dual-rate coil springs provide superior ride quality and increased off-road articulation.
• Front adjustable track bar and rear track bar bracket correct axle positioning under the vehicle.
• Front sway bar Quicker Disconnects and brake line brackets allow for maximum suspension travel.
• Front caster cam locks and bump stop extensions properly correct geometry and limit up-travel.
• Includes all necessary hardware for installation on factory mounting points.

Fits 2007-2018 Jeep Wrangler JK Unlimited 4-Door models.

The JKS J-Venture 3.5-inch suspension system is a comprehensive, bolt-on solution designed to increase ground clearance and improve off-road articulation without compromising on-road handling. This system features JSPEC dual-rate coil springs, which provide a predictable spring rate throughout the suspension cycle, paired with custom-valved FOX 2.0 Adventure Series monotube gas shocks for superior damping performance over varied terrain.

To maintain proper suspension geometry at the 3.5-inch lift height, this kit includes a front adjustable track bar and a rear track bar bracket to re-center the axles. JKS Quicker Disconnects allow for maximum wheel travel on the trail by decoupling the front sway bar, while front caster cam locks ensure alignment is corrected for stable, predictable highway driving.

• JSPEC front and rear dual-rate coil springs for optimized ride quality and load handling
• FOX 2.0 Adventure Series IFP shocks valved specifically for this suspension height
• Heavy-duty front adjustable track bar and rear track bar relocation bracket to correct axle positioning
• JKS front sway bar Quicker Disconnects and brake line brackets for increased off-road travel
• Front and rear bump stop extensions to properly limit suspension up-travel
• Front caster cam locks to restore factory alignment specifications

Fits 1995-2004 Toyota Tacoma Base, DLX, Limited, Pre Runner, S-Runner, and SR5 models (V6 / 6-Lug / 2WD & 4WD).

This Fabtech Performance System delivers a full 6-inch lift for the first-generation Tacoma, engineered to provide significant ground clearance while maintaining the integrity of the vehicle's factory suspension geometry. Unlike many long-travel kits, this system is designed to retain your factory steering centerlink and upper control arms, ensuring predictable handling and simplified maintenance. The kit is specifically engineered to increase caster, providing improved steering control and stability on both 2WD and 4WD configurations.

• 6-inch suspension lift provides clearance for larger tire and wheel combinations
• Includes Fabtech Performance Shocks for enhanced damping and ride quality
• Retains factory steering centerlink and upper control arms
• Increased caster for improved steering feedback and control
• Quick no-weld installation design for straightforward setup
• No driveshaft modification required for Auto Trac systems
• Compatible with factory tires and wheels

Fits select 2000-2005 Ford Excursion and 2001-2004 F-250/F-350 Super Duty (2WD).

This Fabtech Component Box is the core hardware package for 2WD Ford Super Duty and Excursion 4-inch and 6-inch Basic System suspension lifts. Developed through rigorous testing and precision engineering, this box includes the necessary brackets and components to facilitate a reliable lift while maintaining proper suspension geometry and performance on and off the road.

• Specifically designed for 2WD drivetrain configurations
• Compatible with Fabtech 4-inch and 6-inch Basic Systems
• Heavy-duty fabrication for long-term durability and structural integrity
• Ensures proper fitment and alignment capability after lifting
• Includes necessary hardware for the basic system installation

Fits 2015-2024 Toyota 4Runner 4WD (SR5, Limited, TRD Pro, TRD Off-Road, Trail, and Venture models).

This Fabtech Component Box 1 is a foundational element of the 6-inch lift system for the Toyota 4Runner. Engineered with over 20 years of suspension design experience, Fabtech utilizes state-of-the-art software and rigorous testing to ensure proper suspension geometry and a trouble-free installation. This kit provides the heavy-duty components necessary to begin your 6-inch suspension lift, delivering the clearance needed for larger tires and improved off-road capability without sacrificing ride quality.

• Part of a complete 6-inch lift system for 2015-2024 4Runner 4WD models
• Precision-engineered for proper suspension geometry and performance
• Manufactured from high-grade materials for long-term durability
• Developed through extensive research and rigorous testing
• Note: This is Component Box 1 only; other boxes and parts are required for a complete lift kit installation

Fits 2010-2024 Toyota 4Runner models including SR5, Limited, TRD Off-Road, and TRD Pro.

This Fabtech rear lift box kit is engineered to provide a 6-inch height increase for the rear of your vehicle. Designed specifically for 4WD applications, this kit is a mandatory component for completing several Fabtech suspension systems. It utilizes heavy-duty rear lift blocks to achieve the necessary clearance for larger tire and wheel combinations while maintaining appropriate suspension geometry.

• Provides 6 inches of rear suspension lift
• Durable block kit construction for consistent ride height
• Required for Fabtech part numbers: K7059M, K7060DL, K7061DL, K7059, K7066, K7066M, K7067DL, and K7068DL
• Designed for seamless integration with Fabtech 4Runner lift systems

Fits 2017 Ford F450 and F550 4WD Diesel models. This Fabtech rear block kit provides a reliable way to achieve 6 inches of rear lift, helping to level your vehicle's stance or provide the necessary clearance for larger tire and wheel combinations. Engineered for straightforward installation, these blocks integrate with the factory spring pack to maintain suspension geometry while increasing ride height.

This kit is specifically designed for use with Fabtech lift systems and serves as a critical component for the budget-minded enthusiast looking for a high-quality suspension solution without unnecessary complexity.

• Lift Height: 6 inches
• Position: Rear
• Compatible with Fabtech Systems: K2282, K2282M, K2282DL, K2283DL, K2284, K2284M, K2284DL, and K2285DL
• Application: 4WD Diesel models only

Fits 2005-2008 Ford F-250 and F-350 Super Duty 4WD (FX4, Harley-Davidson, King Ranch, Lariat, XL, and XLT).

This Fabtech 6-inch Lift Kit Component Box serves as the structural foundation for your Super Duty suspension upgrade. Precision-engineered to maintain correct suspension geometry at increased ride heights, this box includes the heavy-duty brackets and specialized hardware required to ensure your truck remains stable and alignable. Constructed from high-grade materials and finished for maximum durability, these components are designed to withstand the stress of off-road environments while preserving drivetrain integrity.

• Specifically engineered for 6-inch suspension lift applications
• Corrects suspension geometry to maintain handling and alignment
• Includes heavy-duty mounting brackets and high-strength hardware
• Compatible with 2005-2008 Ford Super Duty 4WD platforms
• Required for the assembly of a complete Fabtech 6-inch lift system

Note: This is a component box only; additional parts are required to complete the full suspension installation.

Fits 2015-2021 Subaru WRX and WRX STI.

The COBB 1.5in Lift Kit provides the additional ground clearance needed for off-road adventures and rugged terrain without sacrificing the performance-oriented nature of your Subaru. Designed specifically for the VA platform, this kit increases ride height to accommodate larger all-terrain tires and improve approach and departure angles for rally-inspired utility or winter driving.

Each kit is engineered to maintain proper suspension geometry while providing a reliable lift that bolts directly to factory mounting points. This suspension upgrade allows WRX and STI owners to bridge the gap between street performance and trail-ready capability while retaining factory ride quality.

• Provides 1.5 inches of total suspension lift
• Engineered for precise fitment on the VA chassis
• Maintains factory ride quality and strut travel
• High-strength construction designed for longevity and durability
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 942850

Fits 2003-2009 Hummer H2 4WD models equipped with rear coil springs.

The Fabtech 6-inch Performance System is a comprehensive suspension solution designed to provide significant ground clearance while maintaining the Hummer H2's factory steering geometry and ride quality. This kit includes Fabtech Stealth shocks, which feature a monotube design for consistent dampening performance over varied terrain. Engineered as a bolt-on solution, this system requires no welding for installation and preserves critical OE components like the steering centerlink and upper control arms.

• 6-inch lift height for increased ground clearance and larger tire fitment
• Includes Stealth series monotube shocks for improved ride control
• Retains factory steering centerlink and upper control arms to preserve geometry
• Increased caster built-in for improved highway tracking and steering feel
• No driveshaft change required for vehicles with Auto Trac transfer cases
• Compatible with factory stock tires and wheels
• Straightforward, no-weld installation

Fits 2019-2024 Ram 1500 Rebel.

Developed for the trail, the Eibach PRO-TRUCK-LIFT Stage 2R system provides high-level damping control and off-road performance. This complete suspension solution combines the height-adjustability of PRO-TRUCK Coilover 2.0s for the front with PRO-TRUCK Reservoir Sport Shocks for the rear. The external reservoirs out back ensure consistent performance by increasing oil capacity, which helps dissipate heat during aggressive driving or over rough terrain.

Each system is engineered using a 46mm monotube piston design with nitrogen-filled variable force valving. The coilovers feature anodized 6061-T6 billet aluminum mounts and heavy-duty bushings that have been cycle-tested for long-term reliability. To ensure consistent quality, every damper is individually dyno-tested to match specified performance targets.

• Stage 2R system includes front coilovers, rear external reservoir shocks, and PRO-LIFT-KIT springs.
• Height-adjustable front coilovers for fine-tuning ride height and ground clearance.
• Monotube design with 46mm pistons and nitrogen-filled variable force valving.
• Anodized 6061-T6 billet aluminum coilover mounts.
• Heavy-duty bushing system cycle-tested for durability.
• Individually dyno-tested for matched performance.
• Engineered and manufactured by Eibach in the U.S.A.

Fits select 2025-2026 Ram 1500 4WD models including RHO, Rebel, and Laramie (3.0L).

Eibach Pro-Lift-Kit springs provide a suspension lift for your truck without the need for complex coilover systems or compromising spacer lifts. By replacing the factory springs, this kit allows for a full range of suspension travel, avoiding the additional stress on bushings and ball joints common with spacer-based leveling kits. These springs are precision-engineered to improve off-road capability while maintaining the stability and handling required for daily on-road driving.

• Provides front lift to level vehicle stance and increase ground clearance
• Allows for larger wheel and tire combinations with improved fender clearance
• Maintains factory suspension geometry and reduces stress on drivetrain components
• Designed and manufactured in the USA
• Engineered specifically for the 3.0L 4WD Ram 1500 platform

Fits select 2025-2026 Ram 1500 4WD models including RHO, Rebel, Laramie, and Tradesman (3.0L).

Eibach Pro-Lift-Kit springs provide a functional suspension lift for your vehicle without the need for complex coilover systems or budget-style spacer lifts. Unlike spacer kits that can limit travel and increase stress on factory bushings and ball joints, these springs are designed to operate within the full range of your suspension's geometry. This results in a lifted stance that maintains excellent on-road stability and improves off-road capability.

• Precision engineered for increased ground clearance and improved handling
• Provides additional fender clearance for larger wheel and tire combinations
• Designed to work with factory shocks or Eibach Pro-Truck shocks
• Manufactured in the U.S.A. using high-tensile spring steel
• Reduces the excessive dive and roll associated with stock suspension
• Manufacturer Part Number: E30-27-016-02-20

Fits 2015-2020 Chevrolet Tahoe 4WD (LS, LT, LTZ, PPV, Premier, and SSV).

The Eibach PRO-TRUCK-LIFT Stage 1 system is a precision-engineered suspension solution designed to provide increased ride height while maintaining the durability of your vehicle’s factory drivetrain components. This matched system of lift springs and shocks is developed using the same off-road race spring technology found in Eibach’s championship-winning vehicles, ensuring balanced ride quality and enhanced capability on technical terrain.

• Includes a matched set of lift springs and performance shocks (MPN: E80-23-030-01-22).
• Engineered for increased suspension travel and off-road control.
• Shocks are individually tested for matched performance in every corner.
• Designed to protect the integrity of factory bushings and ball joints.
• Manufactured by Eibach in the U.S.A. to OE quality standards.

Fits 2007-2018 Jeep Wrangler and Wrangler JK (Rubicon, Sahara, Sport, X, 70th/75th Anniversary, and Sport S) 2-door and 4-door Unlimited models.

The Skyjacker 2-inch suspension lift component box is designed to provide additional ground clearance and a more aggressive stance for your Jeep JK without compromising road manners. Engineered to maintain factory ride quality, these components allow your suspension to respond effectively to both on-road conditions and technical off-road terrain. This kit provides the necessary height to accommodate larger tire packages while improving overall vehicle handling.

• Maintains factory-style ride quality and comfort
• Enhances suspension response on and off-road
• Provides 2 inches of lift for increased clearance
• Includes all necessary mounting hardware
• Detailed installation instructions included
• Manufacturer Part Number: JK20-N
• Limited Lifetime Warranty

Fits 2014-2022 Jeep Cherokee KL (2wd & 4wd) including Latitude, Limited, and Trailhawk models.

The Tuff Country EZ-Ride Suspension 2-inch lift kit is a straightforward solution to increase the ride height of your Jeep Cherokee KL. This kit provides the necessary clearance to install larger tires and gives the vehicle a more aggressive off-road stance while maintaining factory ride quality. Designed as a bolt-on application, it uses precision-engineered spacers to achieve lift without requiring a full suspension replacement or compromising your vehicle’s handling.

• Lifts vehicle 2 inches for increased ground clearance and a leveled stance
• Accommodates larger aftermarket tire sizes
• Includes front strut spacers and rear coil spring spacers
• Maintains factory ride comfort and suspension geometry
• Compatible with both 2wd and 4wd KL chassis models
• Manufacturer Part Number: 42103

Vehicle Fitment

Fits 1969-1973 Chevrolet K10 Pickup and 1969-1972 Chevrolet K20, GMC K15/K1500, and K25/K2500 Pickup.

The Skyjacker 2.5-inch System suspension lift kit (MPN: C225AKS) is engineered to provide additional ground clearance and a more aggressive stance while maintaining a smooth, comfortable ride. Designed to replace or supplement factory suspension components, this system responds to both on-road and off-road conditions to improve overall vehicle handling. Each component is finished with a black powder coat to ensure long-term durability and resistance against corrosion and road debris.

• 2.5-inch lift height for increased tire and ground clearance
• Black powder-coated components for maximum corrosion resistance
• Includes all necessary mounting hardware for a complete installation
• Designed for both 2WD and 4WD vehicle configurations
• Manufacturer Limited Lifetime Warranty
• Detailed installation instructions included

Fits select 1977-1987 Chevrolet K30/V30 and GMC K35/K3500/V3500 1-ton trucks.

Elevate your truck's stance and performance with the Skyjacker Softride 2.5-inch suspension lift kit. This system is engineered to provide the necessary height and tire clearance for off-road terrain while maintaining a smooth, comfortable ride on the pavement. Every component is designed to work within the factory geometry to improve overall handling and vehicle attitude.

Durability is a priority for under-chassis components; Skyjacker finishes these parts in a black powder coating to resist corrosion and road debris. This kit includes the essential mounting hardware and detailed instructions to guide you through the installation process.

• Lift Height: 2.5 inches
• Series: Softride (SR)
• Finish: Black Powder Coated for corrosion resistance
• Includes: All necessary mounting hardware and instructions
• Fitment: Specific to 1977-1987 GM 1-ton 4WD/2WD applications
• Manufacturer Part Number: C125CK
• Warranty: Limited Lifetime Warranty

Fits 1965-1978 Ford F-250 Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT, and XLT.

Achieve the ideal balance of ground clearance and performance with the Skyjacker 2-inch suspension lift kit. Specifically engineered for the classic Ford F-250 chassis, this kit provides the necessary height to run larger tires and improve the vehicle's attitude without sacrificing ride quality. This comprehensive system includes four Skyjacker Monotube shocks, which provide responsive dampening for improved handling during both on-road transit and off-road exploration.

• 2-inch lift height for increased clearance and a leveled stance
• Includes 4 high-performance Monotube shocks for superior dampening
• Complete with all necessary mounting hardware for a secure installation
• Retains factory ride quality while enhancing off-road articulation
• Durable construction designed to withstand rigorous trail use
• Manufacturer Part Number: F720K-M

Fits 1965-1978 Ford F-250 4WD (Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT, and XLT).

This Skyjacker F720K suspension lift kit is engineered to provide a moderate 2-inch lift, allowing for increased ground clearance and larger tire fitment while maintaining factory-like ride quality. Designed specifically for classic 4WD Ford F-250 applications, this kit helps achieve the desired height and attitude without compromising on-road handling or off-road capability.

The system features durable components finished in a black powder coating to ensure long-term resistance against corrosion and harsh trail conditions. This kit includes the necessary mounting hardware and detailed instructions to assist with the installation process.

• Manufacturer Part Number: F720K
• Lift Height: 2 inches
• Vehicle Fitment: 1965-1978 Ford F-250 4WD models
• Finish: Black powder-coated components for corrosion resistance
• Hardware: Includes required mounting hardware and instructions
• Warranty: Limited Lifetime Warranty

Note: Some applications may require additional components for a complete installation depending on specific vehicle configuration.

Fits select 1968-1973 Chevrolet Blazer, K10/K20 Pickup and Suburban, and GMC Jimmy, K1500/K2500 Pickup and Suburban. The Skyjacker 4-inch SYSTEM lift kit is designed to provide a comprehensive suspension upgrade that increases ground clearance and improves off-road capability without sacrificing on-road ride quality.

This complete suspension system replaces worn factory components to deliver a consistent, comfortable ride and a more aggressive stance. All major components are finished in a durable black powder coat to resist corrosion and withstand harsh trail conditions. The kit includes all necessary mounting hardware and detailed instructions to ensure a straightforward installation onto factory mounting points.

• Provides 4 inches of suspension lift for increased tire clearance
• Durable black powder-coated finish for superior corrosion resistance
• Maintains predictable handling and ride quality
• Includes all necessary mounting hardware
• Manufacturer Part Number: C240AKSS
• Backed by Skyjacker's Limited Lifetime Warranty

Fits 1968-1972 Chevrolet and GMC K10, K20, K15, and K25 Pickup and Suburban 4WD models.

The Skyjacker SYS-DIR 4-inch suspension lift kit is engineered to provide increased ground clearance and a more aggressive stance while maintaining predictable handling for daily driving and trail use. This system replaces worn factory components to improve vehicle attitude and accommodate larger wheel and tire packages without sacrificing ride quality.

Every major component is finished in a durable black powder coating to resist corrosion and ensure long-term performance in harsh environments. The kit comes complete with the necessary mounting hardware and detailed instructions to facilitate a straightforward installation process.

• Part Type: Suspension Lift Kit
• Lift Height: 4.0 Inches
• Finish: Black Powder Coat
• Series: SYS-DIR
• Manufacturer Part Number: C240AKSD
• Warranty: Limited Lifetime Warranty

Fits select 1968-1973 Chevrolet and GMC K10/K20, K15/K25, Blazer, Jimmy, and Suburban models.

The Skyjacker C240AKS 4-inch Suspension Lift System provides the ground clearance and tire clearance needed for serious off-road performance while maintaining a smooth, predictable ride on the street. Engineered to replace factory components, this system improves handling and gives your classic GM truck or SUV a more aggressive stance without sacrificing ride quality. The components are finished in a durable black powder coat to resist corrosion and withstand harsh trail conditions.

• 4-inch lift height for increased ground clearance and larger tire fitment
• Black powder-coated finish for superior corrosion resistance
• Maintains factory-style ride quality with enhanced off-road response
• Includes all necessary mounting hardware and installation instructions
• Manufacturer Part Number: C240AKS
• Limited Lifetime Warranty

Fits select 1968-1972 Chevrolet Blazer, K10/K20 Pickup, and Suburban, as well as GMC Jimmy and K15/K25 Pickup and Suburban models.

The Skyjacker 4-inch Suspension Lift SYSTEM (MPN: C240AJKS) provides the necessary clearance and height to accommodate larger wheel and tire packages while improving off-road capability. Engineered to maintain factory-level ride quality, this system utilizes high-quality components designed to respond effectively to both highway and trail conditions. The increased ground clearance and improved suspension travel enhance overall handling and vehicle stance.

Durability is prioritized with steel components that are powder-coated black to resist corrosion and harsh environmental exposure. Each kit is a comprehensive solution that includes essential mounting hardware and step-by-step instructions for a reliable installation. Whether restoring a classic K5 Blazer or building a capable K20 work truck, this system provides a professional-grade suspension upgrade.

• Complete 4-inch lift system for improved ground clearance
• Black powder-coated components for superior corrosion resistance
• Includes all necessary mounting hardware and detailed instructions
• Maintains comfortable ride quality while enhancing handling
• Backed by a Limited Lifetime Warranty
• Manufacturer Part Number: C240AJKS

Fits select 1973-1987 Chevrolet and GMC 1/2-ton 4WD vehicles, including Blazer, Jimmy, Suburban, K10, K15, K1500, V10, and V1500 models equipped with 52-inch rear leaf springs.

This Skyjacker 4-inch System suspension lift kit provides the necessary height and clearance to accommodate larger tires while maintaining the smooth, comfortable ride quality expected from a factory setup. Engineered for durability and performance, this kit improves handling across both on-road and off-road conditions, giving your classic GM truck or SUV a more aggressive stance without compromising drivability.

• Provides 4 inches of suspension lift for improved ground clearance and attitude
• Precision-engineered components powder-coated black to resist corrosion and harsh environments
• Specifically designed for vehicles with 52-inch rear spring configurations
• Includes all required mounting hardware and detailed installation instructions
• Maintains factory-style ride quality and responsive handling
• Manufacturer Part Number: C140AKSS
• Limited Lifetime Warranty

Fits 1973-1987 Chevrolet and GMC 1/2 Ton Suburban models (K10, V10, K15, K1500, and V1500) equipped with 56-inch rear leaf springs.

This Skyjacker suspension lift kit provides a 4-inch increase in ride height, offering the ground clearance and tire room needed for off-road performance while maintaining predictable handling on the pavement. Designed specifically for the GM square-body Suburban platform, this system is engineered to retain factory-style ride quality. All major components are finished in a black powder coating to ensure long-term resistance to corrosion and road debris.

• Provides 4 inches of suspension lift for increased clearance
• Designed for 1/2 ton models with 56-inch rear leaf spring configurations
• Durable black powder-coated finish on hardware and components
• Includes necessary mounting hardware and detailed installation instructions
• Manufacturer Part Number: C140AKSD
• Limited Lifetime Warranty

Note: Some additional components may be required for a complete installation depending on your specific vehicle configuration and shock absorber selection.

Fits select 1973-1987 Chevrolet and GMC 1/2-ton 4WD vehicles, including the Blazer, K5 Blazer, Jimmy, K10, K15, V10, and Suburban models.

The Skyjacker Softride 4-inch suspension lift kit is engineered to provide additional ground clearance and a more aggressive stance without sacrificing the ride quality of your classic GM square-body truck or SUV. This comprehensive kit features Softride leaf springs designed to react to on- and off-road conditions, ensuring a smooth, comfortable ride while improving overall handling. Unlike kits that use lift blocks, this system includes full rear replacement springs for superior performance and longevity.

All major components are powder-coated black to resist corrosion and withstand harsh environments. The kit includes the necessary mounting hardware and detailed instructions to guide you through the installation process on factory mounting points.

• Manufacturer Part Number: C140AKS
• Lift Height: 4 inches
• Spring Type: Front and Rear Softride Leaf Springs
• Finish: Black Powder Coated
• Fitment: 4WD 1/2-ton models
• Includes: Leaf springs and mounting hardware
• Warranty: Limited Lifetime Warranty

Fits select 1973-1987 Chevrolet and GMC 1/2-ton K-Series and V-Series 4WD vehicles, including Blazer, Jimmy, Suburban, and K10/K1500 pickups.

The Skyjacker 2.5-inch suspension lift system is engineered to provide additional ground clearance and a more aggressive stance without sacrificing ride quality. This kit is designed specifically for 1/2-ton models equipped with 52-inch rear leaf springs, ensuring proper geometry and load handling for both on-road comfort and off-road capability. The components feature a durable black powder-coated finish to resist corrosion and harsh environmental conditions.

• Provides 2.5 inches of suspension lift for increased tire clearance
• Maintains factory-like ride quality with improved handling characteristics
• Components are powder-coated black for long-term corrosion resistance
• Includes all necessary mounting hardware and detailed installation instructions
• Designed for 1/2-ton K-Series (1973-1986) and V-Series (1987) applications
• Manufacturer Part Number: C125AKSS
• Limited Lifetime Warranty

Fits 1973-1987 Chevrolet Blazer, K10, K5 Blazer, V10 and GMC Jimmy, K15, K1500, V1500 4WD models.

The Skyjacker Softride 2.5-inch suspension lift kit is engineered to provide the ideal balance of additional ground clearance and superior ride quality. Designed specifically for the classic GM 1/2-ton 4WD platform, this system uses advanced spring technology to respond to both on-road and off-road conditions without the harshness often associated with lifted leaf springs. This kit includes rear springs to ensure a level stance and consistent performance across the vehicle.

• Provides 2.5 inches of suspension lift for increased tire clearance
• Softride spring technology maintains comfortable factory ride quality
• Components are powder-coated black for maximum corrosion resistance
• Includes all necessary mounting hardware and detailed instructions
• Manufacturer Part Number: C125AKS
• Limited Lifetime Warranty

Fits select 2006-2021 Dodge Ram 1500 and Ram 1500 Classic 4WD models.

Improve your truck's front suspension geometry and increase droop travel with the Zone Offroad Adventure Series upper control arms. These arms are specifically engineered to replace factory units on leveled or lifted applications where the stock ball joint is often pushed to its limit. Built from high-strength plate steel that is boxed, gusseted, and fully welded, these arms provide superior rigidity over OE stamped steel or cast components.

These control arms feature a CNC-machined ball joint cup with an improved indexed position to maintain a neutral range of motion at ride height. For long-term reliability, they utilize OE-style rubber bushings to maintain quiet, maintenance-free operation and high-quality greaseable ball joints protected by weather-resistant caps to keep out road debris.

• Direct bolt-on replacement for improved strength and suspension travel
• Boxed and gusseted plate steel construction for maximum durability
• CNC-machined ball joint cups indexed for leveled and lifted stances
• Greaseable ball joints with protective caps to prevent contamination
• Maintenance-free OE-style rubber bushings for quiet operation
• Fully assembled and ready for installation out of the box
• Manufacturer Part Number: ZOND2301