Fits select 1984-2018 Jeep Cherokee XJ, Wrangler YJ/TJ/LJ/JK/JKU, and Grand Cherokee ZJ models.

This high-strength Synergy wheel spacer replacement stud is designed to restore the integrity of your wheel assembly by replacing damaged, cross-threaded, or stripped studs on existing wheel spacer kits. Maintaining proper torque and hardware condition is essential for safe off-road operation, particularly on Jeep models equipped with oversized tires or high-offset wheels. This hardware kit ensures a secure, reliable mounting surface that meets the demands of trail use.

• Manufacturer Part Number: 4110-14-1.5
• Thread Pitch: 14mm x 1.50
• Included Hardware: (1) Replacement wheel stud and (1) matching lug nut
• Compatibility: Engineered specifically for Synergy-brand wheel spacers
• Application: Direct replacement for worn or broken hardware

Fine-tune your wheel fitment and stance with this precision-machined 5mm wheel spacer from Sparco. This spacer is designed to solve clearance issues between the wheel and suspension components or upgraded brake calipers, allowing for a more aggressive track width and improved aesthetics.

• Thickness: 5mm
• Bolt Pattern: 4x100
• Hub Bore (ID): 57mm
• Manufacturer Part Number: 051STB03

Each spacer is engineered to exacting tolerances to ensure balanced rotation and minimize vibration. This 5mm thickness is ideal for minor offset adjustments while maintaining safety. Please verify that your wheel studs or bolts have sufficient thread engagement when using these spacers; extended hardware may be required for certain applications.

Fits select 1997-2010 Acura, Honda, Mitsubishi, and Scion vehicles with M12 x 1.5 thread pitches.

Skunk2 Black Series Forged Lug Nuts are engineered for high-performance applications where reducing unsprung weight is critical. Each lug nut is forged from ultra-strong 7075 aluminum and has been track-proven for nearly a decade. Weighing in at only 23.5 grams each, these nuts significantly reduce rotational mass compared to heavy steel alternatives without compromising structural integrity.

These lug nuts feature knurled ends for a non-slip grip during rapid wheel changes and a perfectly tapered seat to ensure maximum wheel-to-lug contact. The hard-anodized black finish provides superior corrosion resistance and a clean, understated look for your street or track setup.

• Part Number: 520-99-0855
• Thread Pitch: 12 x 1.5
• Quantity: Set of 20
• Material: Forged 7075 Aluminum
• Weight: 23.5g per lug nut
• Finish: Hard Anodized Black
• Design: Knurled ends for grip and tapered seating for secure contact

Fits select 1988-2008 Acura and Honda models, including Integra, Civic, Accord, CRX, Prelude, and Fit.

Skunk2 Black Series Lug Nuts are engineered for the performance enthusiast looking to reduce unsprung weight without compromising strength. Forged from ultra-strong 7075 aluminum, these lug nuts weigh in at a lightweight 23.5 grams each—significantly reducing rotating mass compared to standard steel nuts. This reduction improves suspension response and overall vehicle dynamics.

Each nut features knurled ends to provide maximum grip for quick hand-starting and removal, making them ideal for track-side wheel changes. The hard-anodized black finish provides superior corrosion resistance and a stealthy aesthetic. Designed with a perfectly tapered seat for maximum wheel-to-lug contact and precision-machined threads for durability, these lug nuts have been proven on the race track for nearly a decade.

• Thread Pitch: 12 x 1.5mm
• Quantity: Set of 16 Lug Nuts
• Material: Forged 7075 Aluminum
• Finish: Hard Anodized Black
• Weight: 23.5g per nut
• Feature: Knurled ends for hand-starting
• Manufacturer Part Number: 520-99-0853

Skunk2 Forged Lug Nuts are engineered for high-performance applications where strength and weight reduction are critical. Fits select vehicles utilizing an M12 x 1.25 thread pitch, including Honda and Acura applications. CNC-machined from ultra-strong 7075 aluminum, these lug nuts weigh just 23.5g each, significantly reducing unsprung weight compared to traditional steel hardware.

The Black Anodized Series features a durable hard-anodized finish for superior corrosion resistance and knurled ends to provide maximum grip for quick wheel changes. Each nut is designed with a perfectly tapered seat for maximum wheel-to-lug contact and high-quality threads for long-term durability on the street or the track.

• Material: Forged 7075 Aluminum
• Thread Pitch: M12 x 1.25
• Weight: 23.5g per nut
• Quantity: Set of 20
• Finish: Black Anodized
• Part Number: 520-99-0835
• Seat Type: Tapered

Fits 2018-2020 Jeep Wrangler JL, JLU, and 2020 Jeep Gladiator JT.

Secure your aftermarket or factory wheels with this Rugged Ridge Wheel Lock Nut Set. Engineered to address the common risk of wheel theft, this kit provides a critical layer of security for Jeep owners running premium wheel and tire packages. Each locking nut is designed with the correct M14-1.5 thread pitch and a factory-style conical seat, ensuring a precise fit and proper torque retention for both OE and compatible aftermarket wheels.

Manufactured from hardened steel for superior strength and resistance to rounded edges, these locks are finished in a durable black coating that resists corrosion while blending seamlessly with dark-finish wheels. This comprehensive set includes five locking nuts—covering all four hubs plus the exterior-mounted spare—and the specific security key required for installation and removal.

• Manufacturer Part Number: 16715.34
• Thread Pitch: M14-1.5
• Seat Type: Conical
• Material: Hardened Steel
• Finish: Black
• Kit Contents: 5 Locking Lug Nuts, 1 Security Key
• Warranty: Limited 5-Year Warranty

Fits 2015-2021 Jeep Renegade (all submodels including Trailhawk, Sport, Latitude, and Limited).

Rugged Ridge hub-centric wheel spacers provide the necessary clearance for fitting wider off-road tires while increasing the track width for improved stability both on the pavement and the trail. By utilizing a hub-centric construction, these spacers ensure the wheel is precisely centered on the hub or axle. This design eliminates the vibrations common with non-hub-centric spacers and significantly reduces stress on the wheel studs.

These spacers are CNC-machined from double-anodized, extra-thick 6061-T6 aluminum to provide maximum strength and superior corrosion resistance in harsh environments. Each set includes high-strength Grade 8 studs and lug nuts for a secure, reliable installation. This kit is sold as a pair.

• Manufacturer Part Number: 15201.20
• Thickness: 1.25 inches
• Bolt Pattern: 5x110 mm
• Center Bore: 65.1 mm
• Material: Double-anodized 6061-T6 aluminum
• Hardware: Grade 8 studs and lug nuts included
• Warranty: Limited 5-Year Warranty

Fits select 2007-2018 Toyota Tundra and Jeep Wrangler models with a 5x150mm bolt pattern.

Rugged Ridge 1.25-inch wheel spacers provide the necessary clearance to run wider tires while increasing the vehicle's track width for improved off-road stability. By pushing the wheel further away from the hub, these spacers help eliminate tire rub against suspension components and inner fenders during articulation or full-lock turns.

Each spacer is CNC-machined from double-anodized 6061-T6 aluminum to ensure long-term durability and superior corrosion resistance. To maintain safety and structural integrity under heavy loads, Rugged Ridge utilizes high-strength Grade-8 hardware for all mounting studs and nuts. These spacers are designed to bolt directly to the factory hub using the included hardware for a secure fit.

• Thickness: 1.25 inches
• Bolt Pattern: 5x150mm
• Material: Double-anodized 6061-T6 aluminum
• Finish: Black
• Hardware: Grade-8 strength rating
• Quantity: Sold as a pair
• Manufacturer Part Number: 15201.16
• Warranty: Limited 5-year manufacturer warranty

Fits select 1996-2014 Toyota 4Runner, FJ Cruiser, Tacoma, and Tundra models.

Rugged Ridge 1.25-inch wheel spacers provide the necessary clearance for larger off-road tires or wheels with deeper offsets, improving the stance and stability of your vehicle. These spacers are engineered to be hub-centric, ensuring a precise fit that maintains wheel balance and reduces vibration. Each spacer is manufactured from high-strength forged aluminum for maximum durability compared to standard cast spacers.

This kit includes a pair of spacers finished in a corrosion-resistant black coating. They come equipped with pre-installed M12 x 1.5mm wheel studs and are designed to bolt directly to your factory hubs for a secure installation.

• Thickness: 1.25 inches
• Bolt Pattern: 6 x 5.5 inches (139.7mm)
• Center Bore: 106mm
• Wheel Studs: M12 x 1.5mm
• Material: Forged Aluminum
• Finish: Black
• Quantity: Pair (Set of 2)
• Manufacturer Part Number: 15201.12
• Warranty: Limited 5-Year Warranty

Optimizing tire pressure is critical for off-road performance, allowing for a larger contact patch and a more compliant ride over rough terrain. The Rugged Ridge 4-Piece Brass Tire Deflator Kit (MPN 15104.53) provides a reliable, repeatable way to air down your tires before hitting the trail. Unlike manual bleeding, these deflators can be set to your preferred PSI and will automatically stop when the target pressure is reached.

• Universal Compatibility: Designed to work with most tire and wheel combinations utilizing standard Schrader valve stems.
• Adjustable Pressure: Easily calibrated to your specific off-road requirements for consistent traction in sand, mud, or rock crawling.
• Durable Construction: Machined from high-quality brass for long-term corrosion resistance in harsh outdoor environments.
• Set of 4: Allows you to deflate all four tires simultaneously, saving time at the trailhead.
• Part Number: 15104.53
• Warranty: Includes a limited 5-year manufacturer warranty.

Fits 2018-2025 Jeep Wrangler JK and JL models, including Rubicon, Sahara, Sport, Willys, and Unlimited trims.

After upgrading to an aftermarket rear bumper, license plate placement often becomes an afterthought. The Rugged Ridge Tag Relocation Bracket (MPN: 11585.25) provides a professional solution, moving your plate from the vulnerable factory bumper pocket to a secure, highly visible position on the spare tire carrier. This relocation protects your tag from trail damage while ensuring it remains street-legal and visible.

Constructed from heavy-duty steel with a durable satin black powder coat finish, this bracket is built to withstand off-road vibration and harsh weather. The design is fully adjustable to accommodate various wheel widths and offsets, ensuring a flush fit against your spare. Critically, this bracket is engineered for full compatibility with factory rearview camera equipment, preserving your safety features without modification.

• Relocates license plate to the center of the spare tire carrier
• Maintains factory backup camera functionality
• Fully adjustable for different wheel and tire offsets
• Durable steel construction with satin black powder coat
• Manufacturer Part Number: 11585.25
• Limited 5-Year Warranty

Fits select 1976-2018 Jeep CJ5, CJ7, Scrambler, and Wrangler models (including JK).

Clear larger aftermarket bumpers or oversized spare tires with the Rugged Ridge Spare Tire Spacer. This spacer is engineered to relocate your spare tire two inches up and two inches out, providing necessary clearance while utilizing your factory mounting points. Constructed to original Omix specifications, it features a durable black powder-coated finish to resist corrosion and the elements during off-road use.

This component is designed as a direct-fit solution for vehicles with 5x4.5-inch or 5x5.5-inch wheel bolt patterns. Please note this spacer is specifically intended for use with part number 18676.60.

• Manufacturer Part Number: 11585.02
• Relocation: 2 inches up and 2 inches out
• Bolt Patterns Supported: 5x4.5 in. and 5x5.5 in.
• Finish: Black Powder Coated
• Installation: Bolts to existing factory spare tire mount
• Warranty: Limited 5-Year Manufacturer Warranty

Fits 1987-2006 Jeep Wrangler (All submodels including Sport, Sahara, Rubicon, SE, and Base).

Upgrading to oversized tires requires a spare tire that matches your rig's capability, but factory mounts often lack the clearance for wider wheel and tire combinations. The Rugged Ridge HD Tire Carrier Mount solves this by relocating your spare tire two inches further away from the tailgate, providing the necessary space for up to a 35-inch tire.

Constructed from heavy 1/4-inch steel plate, this bracket is engineered to handle the increased weight and leverage of larger tires. It bolts directly to the factory mounting points on the tailgate for a secure installation that maintains accessibility and functionality.

• Construction: 1/4-inch heavy-duty steel plate
• Offset: Relocates tire 2 inches further from the body for maximum clearance
• Compatibility: Supports spare tires up to 35 inches in diameter
• Fitment: Direct bolt-on for 1987-2006 Jeep Wrangler models
• Manufacturer Part Number: 11585.01
• Warranty: Limited 5-year warranty

Fits all 2020-2025 Jeep Gladiator models including Mojave, Rubicon, Overland, Sport, and Willys. The Rugged Ridge Bed Mount Spare Tire Carrier solves the clearance and accessibility issues caused by oversized spare tires on the Gladiator JT. While factory spares are tucked under the bed, larger 35-inch to 40-inch tires significantly impact departure angles and are difficult to access in mud or rocky terrain.

This pre-runner-style carrier relocates your spare into the truck bed, mounting high enough to allow for hauling flat cargo like plywood underneath. Engineered for harsh off-road use, it features a sturdy frame built from 45mm diameter, 2.5mm-wall steel tubing and 5mm thick CNC-cut, brake-formed steel plate. The integrated wheel mount is fully adjustable to accommodate various wheel offsets, ensuring a secure fit for your specific wheel and tire combo.

• Fits up to a 40-inch wheel and tire combination
• Constructed from 45mm diameter (2.5mm wall) steel tubing and 5mm thick steel plate
• Satin black powder coat finish for maximum corrosion resistance
• No-drill installation using factory mounting locations for superior rigidity
• Adjustable wheel mount depth to fit different offsets
• Manufacturer Part Number: 11546.71
• Limited 5-Year Warranty

Fits 1987-2006 Jeep Wrangler (YJ and TJ) including Sport, Sahara, Rubicon, and Unlimited models.

The Rugged Ridge Spartacus HD Tire Carrier Wheel Mount (MPN: 11546.62) provides the structural integrity and adjustability required for mounting oversized wheel and tire combinations. This mount lifts the mounting position and features integrated depth and tilt adjustability to accommodate large-diameter and wide tires, preventing interference with the rear bumper or bodywork. When paired with the Spartacus HD Tire Carrier Hinge Casting (P/N 11546.51 or 11546.61), this system supports up to and including 37-inch tire diameters.

Constructed from heavy-duty steel, this mount maintains the convenience of one-handed entry to the cargo area. It is designed to work with original equipment and most aftermarket rear bumpers without the need for drilling. The kit includes an adjustable third brake light bracket to ensure visibility is maintained even with larger spares installed.

• Heavy-duty steel construction for increased load capacity
• Depth and tilt adjustability for oversized wheel and tire offsets
• Supports up to 37-inch tires when used with HD hinge casting
• Includes adjustable third brake light bracket
• No-drill installation using factory mounting points
• Manufacturer Part Number: 11546.62

Fits select 1997-2006 Jeep Wrangler TJ and Wrangler Unlimited LJ models. The Rugged Ridge Spartacus HD Tire Carrier Hinge Casting is engineered to provide the strength and stability required to mount oversized wheel and tire combinations. This heavy-duty upgrade manages the increased leverage and vibrations common in off-road environments, preventing the tailgate sag and wear associated with factory hinges.

Constructed from precision die-cast aluminum, this one-piece hinge casting offers exceptional structural integrity without the weight penalty of solid steel. The system utilizes forged steel hinge brackets and hardened steel pins to significantly increase load capacity over original equipment. The design maintains convenient one-handed access to the cargo area and is compatible with both 5x4.5 and 5x5-inch wheel bolt patterns. It installs without drilling and works with OE and most aftermarket rear bumpers.

• Manufacturer Part Number: 11546.61
• Materials: Die-cast aluminum casting with forged steel brackets and hardened steel pins
• Finish: Durable black powder coat
• Wheel Bolt Patterns: 5x4.5-inch and 5x5-inch
• Load Capacity: Supports up to 37-inch tire when used with Spartacus HD Wheel Mount (P/N 11546.52)
• Installation: Bolt-on design; no drilling required

Fits select 2018-2026 Jeep Wrangler and Wrangler Unlimited models.

The Rugged Ridge Spartacus HD Tire Carrier Wheel Mount provides a robust solution for carrying oversized spares on your JL. Engineered from fully-welded heavy-duty steel, this mount distributes weight across a broad footprint to manage the increased load of tires up to 40 inches. The adjustable mounting brackets allow for angled positioning of the spare, providing better bumper clearance and easier access to the rear liftgate.

Designed for durability and utility, each mount features a satin black powder-coated finish for superior corrosion resistance. This kit includes the necessary brackets to reposition your factory backup camera and third brake light, maintaining safety and visibility. For maximum strength, it is recommended to pair this wheel mount with the Spartacus HD Hinge Casting (part number 11546.56).

• Supports up to 40-inch tires
• Heavy-duty steel construction with a satin black powder coat finish
• Vibration tested to Hybrid SAE/MIL-Spec standards
• Direct bolt-on installation with no drilling required
• Compatible with OE and all aftermarket rear bumpers
• Includes backup camera and third brake light relocation brackets
• Manufacturer Part Number: 11546.57

Fits select 2018-2025 Jeep Wrangler JL, including Unlimited, Rubicon, Sahara, Sport, and 4xe models.

The Rugged Ridge Spartacus HD Tire Carrier Hinge Casting (MPN: 11546.56) provides the structural integrity needed to mount oversized wheel and tire combinations. Engineered to manage the amplified force and vibrations experienced during extreme off-road driving, this hinge casting replaces factory components to prevent tailgate sagging and long-term wear. The one-piece design maintains convenient one-handed access to the cargo area by rigidly linking the wheel mount to the reinforced section of the rear quarter panel.

• Precision die-cast aluminum hinge casting for maximum strength without the weight of steel.
• Forged steel hinge brackets and hardened steel pins for superior load capacity over OE hinges.
• Accommodates both 5x4.5-inch and 5x5-inch wheel bolt patterns.
• Durable black powder coat finish for corrosion resistance.
• Compatible with OE and most aftermarket rear bumpers.
• Simple no-drill installation.
• Pairs with Spartacus HD Wheel Mount (P/N 11546.52) for carrying capacity up to 37-inch tires.

Fits 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited trims.

The Rugged Ridge Spartacus HD Tire Carrier Wheel Mount (MPN 11546.52) is engineered to provide the structural integrity and adjustability required for oversized wheel and tire combinations. This mount lifts the mounting position of the spare to accommodate larger diameters while incorporating both depth and tilt adjustability to ensure wide tire options clear the rear bumper and sit flush against the carrier. Constructured from heavy-duty steel, it maintains the convenience of one-handed entry to the cargo area.

• Specifically designed for 2007-2018 Jeep Wrangler JK models
• Lifts mounting position and provides depth/tilt adjustability for oversized spares
• Heavy-duty steel construction for increased load capacity
• Includes adjustable third brake light bracket to maintain visibility
• Compatible with OE and most aftermarket rear bumpers
• Direct bolt-on installation with no drilling required
• Manufacturer Part Number: 11546.52
• Recommended pairing with Spartacus HD Tire Carrier Hinge Casting (P/N 11546.51) for carrying tires up to 37 inches

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited (2-door and 4-door models).

The Rugged Ridge Spartacus HD Tire Carrier Hinge Casting provides the essential structural reinforcement needed to carry oversized wheel and tire combinations. This heavy-duty hinge is precision-engineered to manage the increased leverage and vibration encountered during off-road use, preventing the tailgate fatigue and sagging common with factory hardware. The one-piece design maintains convenient one-handed access to the cargo area while rigidly linking the wheel mount to the reinforced rear quarter panel.

Constructed from precision die-cast aluminum, this hinge provides maximum strength without the weight penalty of solid steel. It features forged steel hinge brackets and hardened steel pins for a load capacity that significantly exceeds OE specifications. For maximum performance and carrying capacity for up to 37-inch tires, pair this casting with the Spartacus HD Wheel Mount (P/N 11546.52).

• Heavy-duty die-cast aluminum construction with forged steel brackets
• Hardened steel pins for superior longevity and wear resistance
• Compatible with factory and most aftermarket rear bumpers
• No-drill installation using existing factory mounting points
• Maintains one-handed entry to the cargo area
• Manufacturer Part Number: 11546.51

Complete your high-performance wheel setup with the Rays Aluminum Air Valve Cap Set in Black (MPN: WVALBK2). These genuine Rays Engineering accessories provide a premium finishing touch while protecting your tire valve cores from road debris, dust, and moisture that can lead to slow leaks.

Precision-machined from lightweight, high-strength aluminum, these caps are engineered for durability. The black anodized finish offers excellent corrosion resistance, ensuring the caps won't seize to the valve stem or lose their luster over time. Designed as a universal fit for standard Schrader valves, they are the ideal complement for Volk Racing, Gram Lights, and other high-end wheel brands.

• Genuine Rays Engineering accessory
• Material: High-grade aluminum construction
• Finish: Durable Black Anodized
• Fitment: Standard Schrader valve stems
• Quantity: Set of 4 caps
• Manufacturer Part Number: WVALBK2

Ensure you can safely remove your wheels with the genuine Rays Engineering L32 Short Type replacement key. This specialized socket is designed to interface perfectly with the internal drive splines of the L32 Short Type lug nut series, providing a secure grip that prevents slipping or rounding off the hardware during high-torque applications.

Whether you are replacing a lost tool or adding a spare to your emergency road kit, this key ensures you have the correct fitment for your Rays hardware. It is manufactured to the tight tolerances required for precision automotive fasteners, maintaining the integrity of your wheel installation.

• Product Type: Replacement Lug Nut Key
• Key Identification: Number 37
• Lug Nut Series: L32 Short Type
• Manufacturer Part Number: WRKEY37
• Construction: High-strength steel alloy

Ensure you can securely remove or install your wheels with this genuine Rays Replacement Key Number 27. Specifically engineered for use with the Rays L42 Long Type series wheel locks and lug nuts, this specialized tool provides the precise interface required to engage the lock pattern without slipping or damaging the finish.

Whether you are replacing a lost tool or adding a spare to your emergency roadside kit, this authentic Rays component is manufactured from high-strength steel to handle the torque specifications required for automotive wheel hardware. Its extended length is designed to clear deep-dish wheel pockets and provide better leverage during use.

• Manufacturer Part Number: WRKEY27L
• Key Pattern: Number 27
• Series Compatibility: Rays L42 Long Type
• Material: High-tensile hardened steel
• Application: Direct replacement for lost or damaged L42 series keys

The Rays Formula FN-II Lug Nut Set provides a high-performance fastening solution for wheels requiring a M14x1.50 thread pitch. Designed for durability and precision, these lugs are engineered to maintain torque while protecting your wheel finish through their specialized design. The Red and Black finish offers a custom aesthetic that complements both performance and luxury wheel styles.

As part of the Formula series, the FN-II is built to handle the rigors of frequent wheel changes and spirited driving. This complete 20-piece set ensures uniform fitment across all four hubs, providing the reliability expected from a premier Japanese manufacturer.

• Manufacturer: Rays
• Product Line: Formula FN-II
• Part Number: WFN21415R
• Thread Pitch: 14x1.50
• Quantity: Set of 20 Lugs
• Color/Finish: Red/Black

The Rays Dura-Nut L42 Straight Type Lug Nut Set provides a high-strength, lightweight solution for wheel security and styling. Engineered with a 14x1.50 thread pitch, these L42 series nuts feature a straight-type profile suitable for a wide range of aftermarket wheel applications. The set includes a full complement of 16 standard lug nuts and 4 locking nuts to help protect your wheels against theft.

Each component is finished in a durable red coating for a long-lasting aesthetic that complements high-performance vehicle setups. This kit serves as a premium replacement for standard wheel hardware, offering the precision and reliability expected from the Rays brand.

• Brand: Rays
• Series: Dura-Nut L42 Straight Type
• Thread Pitch: 14x1.50
• Configuration: 16 Lug Nuts + 4 Lock Nuts
• Color: Red
• Manufacturer Part Number: WDURA4214150R

The Rays Engineering Dura-Nut L42 Straight Type Lug Nut Set provides a high-strength, lightweight wheel fastening solution for vehicles using a 14x1.50 thread pitch. Manufactured from A7075-T6 Duralumin, these nuts significantly reduce unsprung weight compared to standard steel hardware while maintaining the structural integrity required for spirited driving.

This comprehensive kit includes 16 standard lug nuts and 4 locking nuts to provide essential security for your wheels. The L42 designation refers to the 42mm overall length, providing ample thread engagement and a clean, straight-side profile that fits well within most wheel lug holes. The black anodized finish offers a durable barrier against corrosion and a sleek aesthetic for aftermarket or factory wheels.

• Thread Pitch: 14x1.50
• Length: 42mm (L42)
• Style: Straight Type
• Material: A7075-T6 Duralumin
• Finish: Black Anodized
• Kit Configuration: 16 Lug Nuts + 4 Locking Nuts (20 total pieces)
• Includes: Special lock key for security
• Manufacturer Part Number: WDURA4214150B

Secure your wheels with the professional-grade Rays Dura-Nut L42 Straight Type lug nut set. Designed by Rays Engineering for performance enthusiasts, these 12x1.50 thread pitch fasteners are crafted from high-strength A7075-T6 Duralumin. This material provides the structural integrity needed for spirited driving while significantly reducing unsprung mass compared to traditional steel hardware.

• Thread Pitch: 12x1.50
• Length: 42mm (L42)
• Style: Straight Type with closed end
• Material: A7075-T6 Duralumin
• Configuration: 16 standard lug nuts and 4 locking nuts (20 pieces total)
• Finish: Anodized Blue
• Includes special socket for lock nuts
• Manufacturer Part Number: WDURA4212150U

The L42 series features a 42mm length that provides ample thread engagement and a striking aesthetic for aftermarket wheels. This comprehensive kit includes four locking nuts to help protect your wheel investment from theft.

Secure your wheels with the Rays Dura-Nut L42 Straight Type lug nut set. Engineered for high strength and significant weight reduction, these Duralumin fasteners provide a premium finish and reliable security for vehicles utilizing a 12x1.50 thread pitch.

This comprehensive kit includes 16 standard lug nuts and 4 locking nuts to help deter wheel theft. The 42mm straight-type design provides an extended profile that fits various aftermarket wheel pockets while maintaining the structural integrity required for spirited driving and street use.

• Thread Pitch: 12x1.50
• Length: 42mm (L42)
• Style: Straight Type
• Finish: Gun Metallic
• Configuration: 16 Lug Nuts + 4 Lock Nuts
• Material: A7075 T6 Duralumin
• Includes: 1 specialized lock nut key
• Manufacturer Part Number: WDURA4212150G

Upgrade your wheel security and aesthetics with the Rays Dura-Nut L42 Straight Type lug nut set. Engineered for performance and durability, this 20-piece kit features a 42mm length and a clean "Straight Type" profile that fits a wide variety of aftermarket wheels. The black finish provides a sleek, understated look while protecting the fasteners from the elements.

This set includes 16 standard lug nuts and 4 matching locking nuts, providing a critical layer of theft deterrence for your wheel investment. Each kit comes complete with the necessary key for the locking nuts, ensuring a straightforward installation and removal process.

• Manufacturer Part Number: WDURA4212150B
• Thread Pitch: 12x1.50
• Length: 42mm (L42)
• Type: Straight Type
• Finish: Black
• Configuration: 16 Lug Nuts + 4 Locking Nuts
• Includes 19mm/21mm dual hex key

Secure your wheels with the Rays Dura-Nut L42 Straight Type lug nut set, designed for performance enthusiasts who demand both style and security. This set features the L42 42mm length profile in a sleek black finish, providing a clean aesthetic while meeting the rigors of frequent wheel removal and installation.

• Thread Pitch: 12x1.25
• Configuration: 16 standard lug nuts and 4 locking nuts (20 pieces total)
• Length: 42mm (L42)
• Style: Straight Type
• Finish: Black Anodized
• Manufacturer Part Number: WDURA4212125B

The 12x1.25 thread pitch is a direct fit for various Nissan, Subaru, and Suzuki applications. Each set includes a specialized lock key to prevent unauthorized wheel removal, ensuring your investment remains protected.