Fits 2024 Ford F-150 Raptor (3.5L).

Enhance the performance and power delivery of your EcoBoost engine with the Ford Performance M-9603-R35A calibration. This upgrade is specifically engineered and dyno-tested by Ford Performance specialists to optimize the 3.5L EcoBoost powertrain, providing a significant increase in output while maintaining the vehicle's factory reliability and drivability. This calibration is designed exclusively for 2024 models to ensure precise compatibility with the latest engine management systems.

• Developed for the 2024 Ford F-150 Raptor 3.5L EcoBoost
• Peak power output increased to 466 HP
• Engineered and dyno-tested by Ford Performance Parts
• Optimizes throttle response and engine performance parameters
• Manufacturer Part Number: M-9603-R35A

Fits 2021-2023 Ford F-150 Raptor (3.5L).

Enhance the power delivery and drivability of your truck with the Ford Racing Performance Calibration. Engineered specifically for the 3.5L EcoBoost engine in the 2021-2023 F-150 Raptor, this software upgrade recalibrates engine and transmission parameters to optimize throttle response and torque output across the entire RPM range. This calibration provides a seamless performance increase while maintaining factory-level reliability and system integration.

• Manufacturer Part Number: M-9603-R35
• Fits 2021-2023 Ford F-150 Raptor (3.5L EcoBoost)
• Recalibrates engine and transmission mapping for improved performance
• Optimizes throttle response and powerband delivery

Fits 2015-2017 Ford Mustang GT, GT Premium, and 50 Years Limited Edition.

The Ford Racing Power Pack 2 is engineered to deliver a significant increase in horsepower and torque across the entire RPM range for the 2015-2017 Mustang GT. This kit features a high-flow cold air intake and the ProCal Calibration tool to optimize engine performance and improve throttle response. By utilizing production-quality components and revised software, this pack enhances the natural engine sound and driving experience without requiring permanent modifications.

• Includes Ford Racing ProCal Calibration Tool for PCM tuning
• High-flow cold air intake replaces restrictive factory ducting
• Revised sound symposer software for an improved, natural engine note
• Direct-fit installation mounts to all factory locations
• Engineered to provide power gains throughout the RPM range
• Manufacturer Part Number: M-9603-M8A

Fits 2015-2023 Ford Mustang EcoBoost and EcoBoost Premium (2.3L).

The Ford Racing Performance Calibration Kit is a comprehensive power and sound upgrade engineered specifically for the 2.3L EcoBoost platform. This kit bridges the gap between hardware and software, combining a high-flow intake and optimized ignition with the ProCal calibration tool to unlock the engine's potential while maintaining production-quality standards. The components are designed for a seamless installation, mounting directly to all factory stock points for a clean, OE-level finish.

• ProCal Calibration Tool: Delivers a specialized Ford Racing performance tune to the ECU for improved power and response.
• Cold Air Intake: Enhances airflow to the turbocharger, improving intake efficiency and induction sound.
• Cold Spark Plug Set: Specifically gapped and heat-ranged for the increased demands of a performance calibration.
• Revised Sound Symposer Software: Updates the cabin sound profile for a more natural and aggressive engine note.
• Direct Fit: Engineering ensures all components install using factory mounting locations.
• Manufacturer Part Number: M-9603-M4

Fits 2024 Ford F-150 models equipped with the 3.5L EcoBoost engine.

Optimize your truck's power delivery with the Ford Performance M-9603-F35A calibration. This software upgrade is specifically engineered and dyno-tested to increase performance across the powerband while maintaining the reliability and drivability expected from your F-150 powertrain.

• Engineered and tested by Ford Performance specifically for the 2024 3.5L EcoBoost platform
• Delivers increased power and torque while maintaining factory reliability
• Optimized engine parameters for improved performance characteristics
• Manufacturer Part Number: M-9603-F35A

Compatible Models:
2024 Ford F-150 (XL, XLT, Lariat, King Ranch, Platinum, Tremor, SSV, and Police Responder)

Fits 2021-2023 Ford F-150 models equipped with the 3.5L EcoBoost engine, including XL, XLT, Lariat, King Ranch, Platinum, Limited, Tremor, SSV, and Police Responder trims (Excludes Raptor models).

Unlock the potential of your 3.5L EcoBoost with the Ford Racing Performance Calibration. This kit is designed to optimize engine parameters for improved performance and throttle response, providing a more engaging driving experience without sacrificing the reliability of your factory powertrain. As a direct calibration from Ford specialists, this software update is engineered specifically for the 2021-2023 F-150 platform to ensure seamless integration and drivability.

• Manufacturer Part Number: M-9603-F35
• Engine Compatibility: 3.5L EcoBoost
• Model Years: 2021-2023 Ford F-150 (All trims except Raptor)
• Performance Focus: Optimized power delivery and enhanced engine calibration

Fits 2022-2024 Ford Bronco Raptor (3.0L).

Unlock the full potential of your 3.0L EcoBoost engine with the Ford Racing Performance Calibration. Engineered by Ford Performance specialists, this calibration optimizes engine parameters to improve throttle response and power delivery across the RPM range. Designed for the Bronco Raptor platform, this software-based upgrade provides a noticeable increase in performance while maintaining the drivability and integration expected from an OE-developed solution.

• Manufacturer Part Number: M-9603-BR30
• Engineered specifically for the Ford 3.0L EcoBoost engine
• Optimized transmission shift schedule and throttle mapping
• Direct flash-style performance upgrade
• Maintains factory-level system communication and diagnostics

Fits 2021-2024 Ford Bronco models equipped with the 2.7L EcoBoost engine.

Unlock significant power gains and improved drivability for your 2.7L Bronco with the Ford Racing Performance Calibration Kit. This kit is designed to optimize engine and transmission parameters, delivering a more responsive throttle and refined shift schedule while maintaining factory-level integration. The package includes the ProCal 4 delivery tool, allowing for easy installation through the vehicle's diagnostic port.

Beyond power increases, this calibration provides essential utility for off-road enthusiasts. It allows the DLCM module to be reconfigured to support an upgrade from the M190 to the M210 front drive unit and enables speedometer correction for tire sizes up to 37-inch BFG KO2s or axle ratio changes up to 5.38:1.

• Peak Power: 355 HP at 5500 RPM
• Peak Torque: 433 lb-ft at 3500 RPM
• Improved throttle response throughout the RPM range
• Optimized shift schedule for automatic transmissions
• ProCal 4 delivery tool included
• Enables M190 to M210 Front Drive Unit upgrade
• Supports tire size adjustments up to 37x12.5R17
• Supports axle ratio changes up to 5.38:1
• 3-year / 36,000-mile warranty when installed by a Ford dealer or ASE-certified technician
• Premium fuel (91 octane or higher) is required
• Manufacturer Part Number: M-9603-B27

Fits 2025 Ford Bronco (2.3L).

The Ford Racing Performance Calibration (M-9603-B23A) is engineered to unlock the hidden potential of your EcoBoost engine. This factory-developed tune optimizes engine parameters to increase horsepower and torque across the entire powerband, specifically focusing on low-end grunt for improved off-road and on-road drivability. By refining throttle response and shift schedules, this calibration provides a more engaging driving experience without compromising the reliability expected from a Ford-engineered component.

• Specifically tuned for the 2.3L EcoBoost engine
• Optimizes horsepower and torque curves
• Improves throttle response and engine mapping
• Factory-engineered for precise fitment and performance
• Manufacturer Part Number: M-9603-B23A

Fits select 2021-2024 Ford Bronco models (2.3L) including Badlands, Base, Big Bend, Black Diamond, Everglades, Heritage Edition, and Outer Banks.

Unlock the full potential of your 2.3L EcoBoost engine with the Ford Performance Calibration Kit. This comprehensive tuning solution increases output to a peak 330 HP and 385 lb-ft of torque. Beyond raw power, the calibration improves throttle response across the entire RPM range and optimizes shift schedules for automatic transmissions, while adding down-shift rev matching for manual-equipped Broncos.

The included ProCal 4 delivery tool enables essential vehicle adjustments, allowing you to correct the speedometer for tire sizes up to 37-inch BFG KO2s and axle/FDU ratios up to 5.38. It also facilitates the upgrade from M190 to M210 front drive units by reconfiguring the DLCM module.

• Peak Power: 330 HP @ 5500 RPM
• Peak Torque: 385 lb-ft @ 3500 RPM
• Includes ProCal 4 delivery tool
• Optimized automatic shift schedules and manual rev-matching
• Adjustable tire size (up to 37x12.5R17) and axle ratios (up to 5.38)
• Supports M210 front drive unit upgrades
• Premium fuel required
• 3-year / 36,000-mile warranty
• Manufacturer Part Number: M-9603-B23

Upgrade your engine bay with the Ford Racing Black Satin Oval Air Cleaner Assembly (M-9600-C302). This high-quality assembly is designed for single 4-barrel carburetor applications, providing a classic performance aesthetic while ensuring proper filtration for your Ford powerplant. The oval design is a staple for vintage-inspired builds and high-performance street machines.

Constructed for durability and a precise seal, this kit features a premium die-cast aluminum lid and a rugged stamped steel base. The black satin finish offers a clean, low-glare look, prominently featuring the iconic Cobra logo. With an overall assembly height of 2.50 inches, it is engineered to fit under various hood profiles while accommodating standard 4V carburetor necks.

• Manufacturer Part Number: M-9600-C302
• Finish: Black Satin
• Logo: Cobra
• Lid Material: Die-Cast Aluminum
• Base Material: Stamped Steel
• Assembly Height: 2.50 in.
• Compatibility: Single 4V Carburetors
• Includes: Mounting hardware

Fits 2013-2014 Ford Mustang GT models.

This Ford Performance high-flow fuel injector set is engineered for high-performance EFI applications requiring increased fuel volume. Rated at 52 lb/hr, these injectors utilize the latest design technology to ensure optimum fuel atomization and consistent delivery across the entire RPM range. These injectors are specifically trimmed for high flow rates and are best paired with air meters utilizing revised calibrations to maintain precise air-fuel ratios.

• Manufacturer Part Number: M-9593-MU52
• Flow Rate: 52 lb/hr
• Optimized spray pattern for performance applications
• Designed for high-flow EFI systems
• Direct fit for specified Mustang GT engines

Support high-horsepower performance builds with the Ford Racing 55 LB/HR Fuel Injector Set. These high-flow rate injectors are engineered for demanding applications where factory fueling is insufficient. Each injector is precision-trimmed to ensure balanced fuel delivery across all cylinders, making them ideal for engines utilizing revised air meter calibrations and custom tuning.

Built using the latest injector technology, this set provides optimum fuel atomization and consistent spray patterns to maintain driveability while meeting increased fuel demands. These are a direct solution for performance enthusiasts looking to upgrade their fuel system with components tested to Ford Racing standards.

• Flow Rate: 55 LB/HR at 40 PSI
• Quantity: Set of 8 injectors
• Engineered for performance-tuned applications
• Optimized for use with revised air meter calibrations
• Manufacturer Part Number: M-9593-M55GT

Optimize your engine's fuel delivery with this Ford Racing 47 lb/hr high-flow fuel injector set (M-9593-LU47). Engineered specifically for performance applications, these injectors are factory-trimmed to provide the increased flow rates necessary for modified engines and high-output builds.

These fuel injectors are designed to integrate seamlessly with air meters using revised calibrations, providing precise fuel metering for improved throttle response and consistent power delivery across the RPM range. The high-impedance design ensures compatibility with modern engine management systems while maintaining optimum spray patterns and fuel atomization.

• Flow Rate: 47 lb/hr
• Configuration: Set of 8 injectors
• High-impedance design
• Specially trimmed for consistent high flow rates in performance applications
• Optimized for use with revised air meter calibrations
• Manufacturer Part Number: M-9593-LU47

This Ford Racing high-flow fuel injector set (MPN: M-9593-LU24A) is engineered specifically for performance applications that demand increased fuel delivery. Utilizing the latest injector design technology, these components ensure precise atomization and consistent performance for high-output engines.

These injectors are precision-trimmed for high flow rates and perform best when paired with air meters featuring revised calibrations. The balanced set of eight ensures uniform fueling across all cylinders, preventing lean conditions in modified powerplants.

• Manufacturer Part Number: M-9593-LU24A
• Flow Rate: 24 LB/HR
• Quantity: Matching set of 8 injectors
• Technology: Latest generation design for improved spray patterns
• Requirement: Optimized for use with recalibrated air meters

The Ford Performance M-9593-G302 fuel injector set is engineered for high-output performance applications requiring increased fuel delivery. These 47 lb/hr injectors utilize the latest design technology to provide an optimized spray pattern for improved atomization and consistent combustion across all cylinders.

Specifically trimmed for high flow rates, these injectors are an essential upgrade for forced induction or heavily modified naturally aspirated engines. To ensure precise fueling and driveability, these injectors are best paired with mass air meters featuring revised calibrations matched to the increased flow capacity.

• Flow Rate: 47 lb/hr
• High-impedance design for compatibility with many performance ECUs
• Specially trimmed for precision high-flow delivery
• Latest generation technology for optimum spray pattern and atomization
• Ideal for modified or performance-tuned fuel systems
• Manufacturer Part Number: M-9593-G302

Fits 2015-2017 Ford Mustang GT.

The Ford Racing 87mm Throttle Body Adapter (M-9474-M5087) is engineered to facilitate the installation of a larger 87mm throttle body onto the factory intake manifold of the 5.0L Coyote engine. This precision-machined adapter ensures proper alignment and a secure seal, allowing for optimized airflow transitions into the plenum. It is a direct-fit solution for enthusiasts looking to integrate larger induction components into their 2015-2017 Mustang GT.

• Manufacturer Part Number: M-9474-M5087
• Adapter Bore Size: 87mm
• Includes (4) high-strength throttle body mounting bolts
• Direct-fit for 2015-2017 Mustang GT applications

Fits 2011-2023 Ford Mustang and 2011-2017 Ford F-150 (5.0L).

Ensure a reliable, leak-free seal when installing aftermarket headers or reinstalling factory manifolds with the Ford Racing Exhaust Manifold Gasket and Hardware Kit. These components are manufactured to original equipment specifications and tolerances, providing a precise fit and superior durability under high thermal stress. Whether you are performing a header swap or a complete engine service, this kit provides the professional-grade hardware needed to secure the exhaust system properly.

• Manufactured to exact stock specifications for a perfect seal
• Designed specifically for the 5.0L Coyote engine architecture
• Complete kit includes required gaskets and mounting hardware
• Proudly made in the USA
• Manufacturer Part Number: M-9448-M50

Fits 1999-2004 Ford Mustang GT (4.6L).

The Ford Racing Performance Improvement (PI) Intake Manifold is engineered for 4.6L SOHC 2V modular engines, providing the optimized runner geometry and airflow capacity required for the "PI" head configuration. This manifold is a direct replacement for the factory composite unit, ensuring reliable sealing and consistent performance across the RPM range for both street and performance applications.

• Genuine Ford Racing Performance Improvement (PI) design for optimized airflow
• Designed specifically for 4.6L SOHC 2-Valve modular V8 engines
• Replaces worn, cracked, or leaking factory composite manifolds
• Manufacturer Part Number: M-9424-P46A
• Installation Note: Requires a new manifold gasket set (not included)

Fits 2011-2022 Ford Mustang GT, Boss 302, Bullitt, and Mach 1 (5.0L).

The Ford Racing Cobra Jet intake manifold is a direct performance upgrade for the 5.0L Coyote engine, based on the engineering found in the naturally aspirated Cobra Jet race car. This manifold is designed for enthusiasts seeking high-RPM performance, featuring runners specifically tuned for a 7750 RPM peak power delivery. The streamlined design is manufactured on all-new tooling to ensure precise fitment and improved lid stiffness.

Constructed from lightweight, durable composite material, this manifold is tested to 20 PSI, making it suitable for both high-revving naturally aspirated setups and forced induction applications. It is compatible with the production Mustang GT 5.0L fuel rail and includes the necessary intake gaskets for installation.

• Manufacturer Part Number: M-9424-M50CJB
• Runners tuned for 7750 RPM peak power
• Lightweight composite material with improved lid stiffness
• Designed and tested to 20 PSI maximum pressure
• Compatible with factory Mustang GT 5.0L fuel rails
• Includes intake gaskets
• Requires custom calibration (not included)
• Inlet tube does not have provisions for aspirator tubes on automatic transmission-equipped Mustang GTs
• Not compatible with OE or Ford Performance strut tower braces
• Nitrous oxide use is not recommended for this manifold

Fits 2011-2023 Ford Mustang and 2011-2017 Ford F-150 (5.0L).

The Ford Racing Gen 3 5.0L Coyote Intake Manifold is a performance-engineered upgrade designed to optimize airflow and power delivery. This Gen 3 manifold is a popular and effective modification for Gen 1 and Gen 2 Coyote engines, specifically developed to provide improved horsepower and torque. Constructed from high-quality materials to meet OEM standards, it serves as a direct replacement or performance enhancement for your 5.0L engine's intake system.

• Genuine Ford Racing performance part (MPN: M-9424-M50C)
• Optimized for increased horsepower and torque in Gen 1 and Gen 2 5.0L Coyote engines
• Standard equipment on 2018-2023 Mustang 5.0L Gen 3 Coyote engines
• Engineered for precise fitment and improved volumetric efficiency
• Constructed from durable composite materials to resist heat soak

Fits 2011-2014 Ford Mustang GT and Boss 302 (5.0L).

The Ford Racing Boss 302 Intake Manifold is the same high-performance component factory-equipped on the 2012-2013 Boss 302. Engineered for the 5.0L 4V Ti-VCT engine, this modular manifold features a high-volume plenum and short, straight runners designed to maximize airflow at upper RPM levels without sacrificing essential low-end torque. Constructed from high-quality, lightweight composite material, it provides excellent thermal management and high-RPM flow characteristics.

As an assembly-line part, this manifold ensures a direct fit and long service life. Please note that custom calibration is required after installation to prevent engine damage. Additionally, the Boss inlet tube does not include provisions for an aspiration tube hookup.

• Manufacturer Part Number: M-9424-M50BR
• Lightweight composite construction
• Short runners optimized for high-RPM performance
• Includes O-ring gaskets
• Includes unique Ford Racing intake badging
• Direct fit for 2011-2014 Ford Mustang 5.0L engines
• Calibration required for operation

Fits select 2005-2010 Ford Mustang GT, Bullitt, and Shelby GT models (4.6L 3V).

Engineered to maximize airflow while maintaining factory clearance, the Ford Racing Performance Intake Manifold features high-flow runners and an open plenum design. This manifold is constructed from a lightweight composite plastic, which provides superior resistance to heat soak compared to traditional aluminum alternatives, ensuring cooler intake charges during high-performance driving.

Designed for versatility, this unit has been pressure-tested up to 2 bar (approximately 29 psi), making it a reliable choice for forced induction applications such as turbocharging or supercharging. The low-profile design ensures it fits comfortably under the stock hood without the need for modifications.

• Manufacturer Part Number: M-9424-463V
• High-flow runners and open plenum design for increased volume
• Lightweight composite construction resists heat soak
• Tested to 2 bar pressure for forced induction compatibility
• Direct fit for 3-valve 4.6L engines
• Includes a complete set of intake gaskets

Fits 2015-2021 Ford Mustang EcoBoost and EcoBoost Premium (2.3L).

Enhance the forced induction capabilities of your S550 with the Ford Performance High Performance Turbocharger. This engineered upgrade (MPN: M-9348-23T) provides increased airflow and efficiency over the factory unit, designed specifically for enthusiasts looking to maximize the output of their 2.3L EcoBoost engine. For optimal results, this turbocharger is designed to pair with Ford Performance M-6250-23EBH camshafts.

• Compressor Wheel: Increased from the factory 60mm to 63mm for greater induction volume.
• Turbine Wheel: 50mm wheel diameter for improved exhaust flow and response.
• Housing Design: Features an enlarged compressor housing volute to optimize airflow efficiency.
• Build Quality: Genuine Ford Performance part ensures factory-level fitment and reliability.
• Manufacturer Part Number: M-9348-23T

Fits 2021-2025 Ford Bronco models (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, Stroppe Edition, and Wildtrak).

Equip your vehicle with the aggressive wide-body stance of the Sasquatch package. This Ford Racing Sasquatch Fender Flare Kit (M-9164-BFK) provides the necessary tire coverage for oversized wheel and tire combinations, protecting your body panels from trail debris while maintaining an integrated factory appearance. These are the same components found on factory Sasquatch-equipped vehicles, ensuring a perfect fit and finish.

• Genuine Ford Racing factory equipment
• Optimized width for oversized off-road tire and wheel combinations
• Durable, impact-resistant construction for trail use
• Direct-fit installation using existing factory mounting points
• Includes all flares required for a complete vehicle set
• Manufacturer Part Number: M-9164-BFK

Fits 2021-2026 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.

Equip your Bronco with the factory-style control it deserves. The Ford Performance auxiliary switch kit is the definitive solution for vehicles not originally equipped with overhead switches from the assembly line. This kit provides a seamless, integrated way to manage aftermarket lighting, winches, and other electrical accessories without cluttering the dashboard with non-OE components.

Designed to install into factory mounting points, this kit ensures your interior maintains its professional appearance while gaining the functionality of six pre-wired switches. It is the ideal foundation for any off-road build requiring centralized power management for auxiliary systems.

• Manufacturer Part Number: M-9100-BR
• Direct replacement/upgrade for vehicles without factory-equipped auxiliary switches
• Provides a clean, integrated OE finish for accessory control
• Compatible with a wide range of aftermarket lighting and electrical components
• Includes necessary hardware for installation into the overhead console position

Fits select 2005-2014 Ford Mustang GT, Boss 302, and Shelby GT500 models.

Engineered for high-output applications, the Ford Performance M-8C607-MSVT cooling fan is designed to manage the increased thermal loads generated by performance modifications. Maintaining stable operating temperatures is critical for engine longevity and consistent power delivery, especially during spirited driving or track sessions where factory cooling components may reach their limits. This assembly provides the airflow necessary to dissipate heat more effectively than standard units.

• High-output electric fan assembly optimized for performance cooling
• Direct-fit upgrade for Mustang GT, Boss 302, and Shelby GT500/KR
• Essential for vehicles with forced induction or significant power upgrades
• Genuine Ford Performance engineering for reliable operation
• Manufacturer Part Number: M-8C607-MSVT

Vehicle Fitment

Fits 1979-1993 Ford Mustang and 1984 Mercury Capri.

Streamline your engine bay for competition with the Ford Performance smog pump eliminator idler bracket. Engineered specifically for off-road and racing applications, this bracket replaces the factory air pump to reduce front-end weight and simplify the accessory drive system. This direct bolt-on component installs into the original mounting position and is designed to maintain the correct geometry required to use your factory serpentine belt, eliminating the need for custom belt lengths.

• Direct bolt-on replacement for the stock air pump
• Engineered to work with the standard factory serpentine belt
• Reduces front-end weight for improved racing performance
• Designed for off-road and competition use only
• Proudly made in the USA
• Manufacturer Part Number: M-8604-A50

Fits 2011-2014 Ford Mustang GT and Boss 302 (5.0L).

Upgrade your Coyote engine with the same high-performance charging components used on the production 2012 Mustang Boss 302. This Ford Racing alternator kit is specifically engineered to maintain belt integrity and component longevity during high-RPM operation. It replaces the standard charging system components with heavy-duty hardware designed for aggressive driving and track conditions.

• One-Way Clutch: Features a specialized clutch pulley to prevent belt hop-off during rapid upshifts and sudden RPM changes.
• High-Tension Tensioner: Includes a tensioner with increased spring rate for superior belt control and reduced slip.
• Larger Diameter Pulley: Slows down the internal armature speed to reduce mechanical drag and minimize parasitic horsepower loss.
• High-RPM Stability: Validated for performance use where sustained high engine speeds are common.
• Made in the USA
• Manufacturer Part Number: M-8600-M50BALT

Fits 1985-1993 Ford Mustang GT, LX, and SVT Cobra.

The Ford Racing A/C Eliminator Kit (M-8511-A50) is engineered for Fox Body owners looking to shed parasitic drag and front-end weight for dedicated racing applications. This kit allows you to remove the bulky air conditioning compressor while maintaining your power steering system by relocating the pump to the A/C compressor's original mounting position.

By removing the heavy compressor and its associated hardware, you improve front-to-rear weight transfer, helping to lower ETs and simplify the engine bay. The kit features a robust two-piece bracket design for a secure installation that aligns with factory accessory spacing. This installation requires a new, shorter serpentine belt (sold separately) to accommodate the revised accessory drive path.

• Relocates factory power steering pump to the A/C compressor location
• Reduces front-end weight to improve rear weight transfer and traction
• Robust two-piece bracket design for secure mounting
• Includes necessary installation hardware
• Designed for 1985-1993 Ford Mustang racing applications
• Manufacturer Part Number: M-8511-A50