Injector Dynamics 1300cc high impedance fuel injectors deliver the precise fuel metering required for high-performance tuning. These injectors are engineered for exceptional low-pulse-width linearity and pressure stability, providing smooth idle and cruise behavior even in high-output applications. Their high impedance design allows for direct control by most factory and aftermarket ECU drivers without requiring an external resistor box.

• Flow Rate: 1300cc/min at 3.0 bar (43.5 psi)
• Length: 60mm (O-ring to O-ring)
• Bottom O-Ring: 14mm (Blue)
• Impedance: High impedance
• Compatibility: Safe for all known automotive fuels including E85 and alcohol-based blends
• Quantity: Matched set of 8 injectors

Each set is closely matched to ensure consistent cylinder-to-cylinder fuel distribution, reducing the risk of lean conditions under load. The corrosion-resistant internals provide long-term reliability when using oxygenated or alternative fuels.

Fits 2013-2014 Ford Mustang GT models.

This Ford Performance high-flow fuel injector set is engineered for high-performance EFI applications requiring increased fuel volume. Rated at 52 lb/hr, these injectors utilize the latest design technology to ensure optimum fuel atomization and consistent delivery across the entire RPM range. These injectors are specifically trimmed for high flow rates and are best paired with air meters utilizing revised calibrations to maintain precise air-fuel ratios.

• Manufacturer Part Number: M-9593-MU52
• Flow Rate: 52 lb/hr
• Optimized spray pattern for performance applications
• Designed for high-flow EFI systems
• Direct fit for specified Mustang GT engines

Support high-horsepower performance builds with the Ford Racing 55 LB/HR Fuel Injector Set. These high-flow rate injectors are engineered for demanding applications where factory fueling is insufficient. Each injector is precision-trimmed to ensure balanced fuel delivery across all cylinders, making them ideal for engines utilizing revised air meter calibrations and custom tuning.

Built using the latest injector technology, this set provides optimum fuel atomization and consistent spray patterns to maintain driveability while meeting increased fuel demands. These are a direct solution for performance enthusiasts looking to upgrade their fuel system with components tested to Ford Racing standards.

• Flow Rate: 55 LB/HR at 40 PSI
• Quantity: Set of 8 injectors
• Engineered for performance-tuned applications
• Optimized for use with revised air meter calibrations
• Manufacturer Part Number: M-9593-M55GT

Optimize your engine's fuel delivery with this Ford Racing 47 lb/hr high-flow fuel injector set (M-9593-LU47). Engineered specifically for performance applications, these injectors are factory-trimmed to provide the increased flow rates necessary for modified engines and high-output builds.

These fuel injectors are designed to integrate seamlessly with air meters using revised calibrations, providing precise fuel metering for improved throttle response and consistent power delivery across the RPM range. The high-impedance design ensures compatibility with modern engine management systems while maintaining optimum spray patterns and fuel atomization.

• Flow Rate: 47 lb/hr
• Configuration: Set of 8 injectors
• High-impedance design
• Specially trimmed for consistent high flow rates in performance applications
• Optimized for use with revised air meter calibrations
• Manufacturer Part Number: M-9593-LU47

This Ford Racing high-flow fuel injector set (MPN: M-9593-LU24A) is engineered specifically for performance applications that demand increased fuel delivery. Utilizing the latest injector design technology, these components ensure precise atomization and consistent performance for high-output engines.

These injectors are precision-trimmed for high flow rates and perform best when paired with air meters featuring revised calibrations. The balanced set of eight ensures uniform fueling across all cylinders, preventing lean conditions in modified powerplants.

• Manufacturer Part Number: M-9593-LU24A
• Flow Rate: 24 LB/HR
• Quantity: Matching set of 8 injectors
• Technology: Latest generation design for improved spray patterns
• Requirement: Optimized for use with recalibrated air meters

The Ford Performance M-9593-G302 fuel injector set is engineered for high-output performance applications requiring increased fuel delivery. These 47 lb/hr injectors utilize the latest design technology to provide an optimized spray pattern for improved atomization and consistent combustion across all cylinders.

Specifically trimmed for high flow rates, these injectors are an essential upgrade for forced induction or heavily modified naturally aspirated engines. To ensure precise fueling and driveability, these injectors are best paired with mass air meters featuring revised calibrations matched to the increased flow capacity.

• Flow Rate: 47 lb/hr
• High-impedance design for compatibility with many performance ECUs
• Specially trimmed for precision high-flow delivery
• Latest generation technology for optimum spray pattern and atomization
• Ideal for modified or performance-tuned fuel systems
• Manufacturer Part Number: M-9593-G302

The Injector Dynamics ID1300 is a high-performance fuel injector engineered to bridge the gap between the ID1050-X and the ID1700-X. Designed specifically for use with alternative fuels, its internal components are constructed from corrosion-resistant materials, making it fully compatible with E85 and other alcohol-based fuels while maintaining exceptional idle and cruise behavior.

• Manufacturer Part Number: 1300.34.14.14.5
• Series: ID1300
• Quantity: Set of 5
• Length: 34mm (Short)
• Inlet O-Ring: 14mm
• Outlet O-Ring: 14mm
• Electrical Connector: USCAR

Each set is flow-matched to provide consistent fuel delivery across all cylinders, ensuring optimal combustion and tuning precision for forced induction or high-output naturally aspirated builds. These injectors feature a compact 34mm length and standard 14mm o-rings for specific fuel rail and manifold configurations.

The Injector Dynamics ID1050X is a high-output fuel injector designed for extreme performance and motorsport applications. Developed as the evolution of the ID1000, this X-Series injector provides increased flow and improved performance across all fuel types. This specific set of 16 injectors is configured with a 14mm lower O-ring and no adapter top, making it ideal for fuel systems requiring direct fitment to the fuel rail without additional height extensions.

• Performance: Superior low-pulse-width linearity and consistent fuel delivery even at high pressure.
• Fuel Compatibility: Corrosion-resistant internals compatible with all known fuels, including E85 and alcohol-based fuels.
• Configuration: 14mm lower O-ring diameter with no adapter top (shorty/standard height).
• Precision Matching: Dynamically matched set of 16 ensures uniform cylinder-to-cylinder fuel distribution.
• Manufacturer Part Number: 1050.34.14.14.16

Fits 2006-2017 Yamaha Raptor 700 models.

DeatschWerks high-performance fuel injectors provide the precise delivery required for high-output powersport applications. These 2200cc/min injectors are engineered for drop-in fitment, allowing for a straightforward installation that integrates with the factory fuel system. Designed to support extreme fueling demands, they are ideal for forced induction builds or E85 conversions where maximum flow and reliable atomization are critical.

• Flow Rate: 2200cc/min
• Fitment: Drop-in replacement for factory injectors
• Application: 2006-2017 Yamaha Raptor 700
• Optimized for: High-horsepower and alternative fuel (E85) setups
• Manufacturer Part Number: 16S-47-2200-1

Ensure a reliable, leak-free seal in your high-performance fuel system with the BLOX Racing 14mm Viton O-ring set. These seals are engineered to replace worn or cracked factory O-rings, providing a critical interface between the fuel injectors and the fuel rail or intake manifold. High-performance applications demand superior sealing to prevent dangerous fuel leaks and vacuum issues.

Constructed from premium Viton (FKM) elastomer, these O-rings offer exceptional resistance to high temperatures and aggressive modern fuel chemicals, including ethanol and methanol blends. Viton outperforms standard nitrile rubber by maintaining its elasticity and sealing properties under extreme engine bay heat, preventing the hardening that leads to failure. This set of eight is an essential component for any fuel rail service, injector cleaning, or manifold upgrade.

• Manufacturer Part Number: BXEF-OR-14-8
• Material: High-temperature Viton (FKM)
• Size: 14mm
• Quantity: Set of 8
• Application: Performance fuel injectors and fuel rails

Fits select Honda B-Series, D-Series, and H-Series engines.

BLOX Racing Eco-Fi Street Fuel Injectors are engineered to provide precise, consistent fuel delivery for high-performance street applications. Rated at 550cc/min, these injectors offer the increased fuel volume necessary for modified naturally aspirated or mild forced-induction setups without sacrificing idle quality or drivability.

This complete set of four injectors includes 1/2-inch (12.7mm) adapters, ensuring compatibility and a secure seal during installation on Honda B, D, and H-series fuel rails. Each unit is tested to maintain tight tolerances for reliable flow matching across all cylinders.

• Manufacturer Part Number: BXEF-06514.11-550-4
• Flow Rate: 550cc/min
• Series: Eco-Fi Street
• Adapters: 1/2-inch included
• Quantity: Set of 4
• Compatibility: Honda B-Series, D-Series, and H-Series engines

Fits Honda K-Series engines.

The BLOX Racing Eco-Fi Street series provides a precise fuel delivery solution for Honda K-Series builds requiring higher flow than factory components. These 550cc/min injectors are engineered to maintain excellent atomization and consistent fuel metering, making them a preferred choice for high-output naturally aspirated setups or mild forced induction applications.

• Brand: BLOX Racing
• Product Line: Eco-Fi Street
• Flow Rate: 550cc/min
• Engine Compatibility: Honda K-Series
• Quantity: Set of 4 matched injectors
• Manufacturer Part Number: BXEF-06514-550-4

By providing a balanced flow across all four cylinders, these injectors help prevent lean conditions and ensure stable idle characteristics. Each injector is constructed to handle standard pump fuels and integrates with K-Series fuel rails for a straightforward installation process.

Fits Honda K-Series engines.

BLOX Racing Eco-Fi Street Series fuel injectors are engineered to provide the consistent fuel delivery and atomization required for high-performance K-Series builds. These 1000cc/min injectors are ideal for street and track applications, particularly those utilizing forced induction or high-compression naturally aspirated setups. The included 1/2-inch (14mm) top adapters ensure these injectors seat correctly in the factory or aftermarket K-series fuel rails, providing a secure, leak-free seal.

• Series: Eco-Fi Street
• Flow Rate: 1000cc/min
• Quantity: Set of 4 matched injectors
• Adapters: 1/2-inch (14mm) top adapters included
• Fitment: Honda K-Series engines
• Manufacturer Part Number: BXEF-04914.14-1000-4

Support high-performance fuel demands with the BLOX Racing Eco-Fi Street Injectors. This set of four 1000cc/min injectors is engineered for Honda B, D, and H-series engines, providing the precise fuel delivery and atomization required for turbocharged or heavily modified naturally aspirated builds. These injectors offer the reliable flow necessary to maintain stable idle characteristics while providing the headroom needed for increased power levels.

• Fits Honda B-series, D-series, and H-series engines
• Flow Rate: 1000cc/min
• Includes 1-inch adapters for proper seating and fitment with compatible fuel rails
• High-impedance design compatible with most aftermarket ECUs
• Set of 4 matched injectors
• Manufacturer Part Number: BXEF-04914.11-1000-4

Each set includes 1-inch adapters to ensure a secure fit within the fuel rail, making these a straightforward upgrade for enthusiasts seeking to optimize their fuel system for street or track use. These injectors replace lower-flow OE units to prevent lean conditions under high load.