Fits 2022-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 (including Diesel models).

Developed for technical trails and heavy-duty off-road use, the Eibach PRO-TRUCK Stage 2R system provides precision damping control and ride-height adjustability. This kit combines height-adjustable PRO-TRUCK Coilover 2.0 front units with PRO-TRUCK Reservoir dampers for the rear, ensuring consistent performance and heat dissipation no matter how much the terrain demands from your suspension.

• Front PRO-TRUCK Coilover 2.0s allow for adjustable ride height to level the vehicle or accommodate larger tires.
• Rear PRO-TRUCK Reservoir Sport Shocks feature an external reservoir for increased oil capacity and fade resistance.
• Anodized 6061-T6 billet aluminum coilover mounts for high-strength durability.
• 46mm piston monotube design with nitrogen-filled variable force valving.
• Individually dyno-tested to ensure matched performance and reliability across all components.
• Heavy-duty bushing system is cycle-tested for long-term service life in harsh environments.
• Engineered, tested, and manufactured by Eibach in the U.S.A.

Fits 2022-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 (3.0L Turbo Diesel).

Eibach PRO-TRUCK COILOVER 2.0 systems are engineered for drivers seeking both on-road refinement and off-road capability. Utilizing an extended-travel monotube design and nitrogen-filled variable force valving, these coilovers provide consistent damping and maximum traction on technical trails. The adjustable threaded spring perch allows for fine-tuning the front ride height between 0.4 and 2.6 inches, making it easy to accommodate heavier loads or larger tire and wheel packages.

These units come pre-assembled for a direct-fit, bolt-on installation, replacing the factory front struts without additional hardware. Each coilover features 6061-T6 billet aluminum mounts, a large 46mm piston, and Eibach ERO Off-Road Race Springs. To ensure long-term reliability, every unit is individually dyno-tested and the heavy-duty bushing system is cycle-tested for durability.

• Adjustable front lift height: +0.4" to +2.6"
• 46mm monotube design with variable force valving
• Anodized 6061-T6 billet aluminum mounts
• Equipped with Eibach ERO Off-Road Race Springs
• Pre-assembled for factory direct replacement
• Individually dyno-tested for matched performance
• Sold as a pair
• Engineered and manufactured by Eibach in the U.S.A.

Fits 2005-2023 Toyota Tacoma 6-lug models (Base, SR, SR5, TRD Sport, TRD Off-Road, TRD Pro, Limited, and Trail Edition).

King Shocks OEM Performance kits are engineered to provide a significant upgrade in damping control and ride quality for the Toyota Tacoma. These front coilovers feature large 2.5-inch diameter shock bodies that increase fluid capacity for cooler operation and more consistent damping during extended off-road use. The remote reservoir design further enhances heat dissipation and allows for increased wheel travel compared to factory components.

This pair comes equipped with King’s Wide Range Compression Adjusters, providing 20 precise clicks of adjustment to fine-tune your suspension for varying terrain or cargo loads. The 100% bolt-on design allows for an easy installation using factory mounting points and offers adjustable ride height to accommodate stock or lifted configurations.

• Large 2.5-inch shock bodies for increased fluid capacity and cooling
• External remote reservoirs for superior heat dissipation
• Wide Range Compression Adjuster with 20 precise settings
• Internal damping curves and spring rates optimized specifically for the Tacoma chassis
• Built to the same tolerances as King Race Series shocks
• Fully rebuildable, serviceable, and tunable design
• Adjustable ride height for front-end leveling or lift
• Manufacturer Part Number: 25001-119A-EXT

The HKS HIPERMAX S Full Canceller Kit is an essential solution for Toyota GR Supra (DB82) owners upgrading to high-performance aftermarket coilovers. When the factory Adaptive Variable Suspension (AVS) is replaced with non-electronic dampers, the vehicle's ECU detects the missing actuators, triggering dashboard warning lights and potentially restricting drive mode selections.

This kit provides a direct plug-and-play bypass, mimicking the electrical load of the original equipment dampers to maintain factory system integrity. Built specifically for the DB82 chassis, it allows you to enjoy the mechanical advantages of the HKS HIPERMAX S series or other suspension systems without electronic interference or ECU error codes.

• Prevents AVS/electronic suspension error messages and dashboard warning lights
• Maintains factory drive mode functionality when electronic dampers are removed
• Direct plug-and-play installation into factory wiring harnesses
• No wire splicing or permanent vehicle modifications required
• Specifically engineered for the Toyota GR Supra (DB82) chassis
• Manufacturer Part Number: 80330-AT023CP

The HKS HIPERMAX S coilover system provides a precision-engineered suspension upgrade for the Subaru Impreza WRX STI GDB (Applied Models E-G). Developed as the evolution of driving comfort, this kit replaces the factory struts with a fully adjustable monotube design that balances track-ready handling with the damping refinement required for daily street use.

• Dual PVS (Pre-load Valve System): Optimizes damping force at low piston speeds for improved tire contact and stability.
• WR (Wide Range) Needle: Features 30 levels of adjustment with a revised internal needle shape for a more distinct change in feel between settings.
• Advanced PCO (Pre-load Combination Oil): Specialized fluid reduces friction and maintains consistent performance across wide temperature ranges.
• Strengthened Inverted Strut: Designed to handle high lateral loads on the GDB chassis while maintaining smooth suspension travel.
• Manufacturer Part Number: 80330-AF003

Each kit includes four complete coilover assemblies, high-strength aluminum top mounts, and specialized adjustment wrenches for height and damping tuning.

Fits select 1992-2000 Honda Civic (EG/EK) and 1994-2001 Acura Integra (DC2/DC4).

The BLOX Racing Drag Pro+ Series coilover system is engineered specifically for front-wheel-drive drag racing applications where launch consistency and weight transfer management are critical. These coilovers utilize a specialized valving profile and a high-rate 18kg rear spring to significantly reduce rear-end squat during hard launches. By maintaining a more level chassis attitude, these units help keep the vehicle's weight over the front drive wheels to maximize traction and improve 60-foot times.

Constructed with high-quality internal components and durable finishes, the BXSS-00103 kit provides the necessary stiffness for dedicated track use while allowing for precise ride height adjustments. Each unit is designed to bolt directly into the factory suspension locations of EG, EK, and DC chassis, making them a straightforward upgrade for serious drag racers.

• Manufacturer Part Number: BXSS-00103
• Series: Drag Pro+
• Rear Spring Rate: 18kg/mm
• Application: Drag racing specific
• Fitment: Honda Civic (1992-2000), Acura Integra (1994-2001)
• Designed to minimize rear-end squat and maximize front-wheel traction

Fits 1992-2001 Honda Civic and Acura Integra models (All trims including Si, GS-R, and Type R).

The BLOX Racing Competition Series coilover system is engineered specifically for enthusiasts demanding superior handling on the track. Designed for the EG, EK, and DC chassis, these coilovers feature aggressive spring rates and performance-tuned valving to provide maximum stability during high-speed cornering and precision maneuvers. This setup replaces the soft factory suspension with a rigid, track-ready platform that minimizes body roll and enhances steering response.

• Manufacturer Part Number: BXSS-00101
• Spring Rates: 12kg/mm (Front) / 10kg/mm (Rear)
• Compatible Chassis: EG, EK, DC
• Ideal for road racing, time attack, and aggressive track use
• Full set of front and rear coilover assemblies

Compatibility includes 1992-2000 Honda Civic (CX, DX, EX, GX, HX, LX, Si, VX, Value Package) and 1994-2001 Acura Integra (GS, GS-R, LS, RS, Special Edition, Type R).

Fits 1992-2000 Lexus SC300 and SC400 (JZZ30/UZZ30).

Tein Flex Z coilovers provide a high-performance suspension solution for the Lexus SC chassis, offering full ride height adjustability without sacrificing damper stroke. Engineered in Yokohama, Japan, the Flex Z series utilizes a twin-tube system designed to balance street comfort with the stiffness required for spirited driving. This setup allows you to lower your vehicle's center of gravity while maintaining the compliance needed for daily road use.

The VST60-C1SA3-C kit features 16-level damping force adjustment, enabling precise control over rebound and compression to suit your specific tire setup and driving style. By using a sealed structure design, Tein provides a cost-effective, high-quality damper that is replaced via cartridge when worn, rather than requiring a traditional rebuild. Each unit is finished with Tein's signature green powder coat and ZT coating on the shell case for superior corrosion resistance against the elements.

• Twin-tube internal construction for improved ride quality and street performance
• 16-way damping force adjustment (compatible with EDFC controllers)
• Full-length ride height adjustment allows for independent preload and height settings
• Pillow ball or reinforced rubber upper mounts included for direct steering response
• ZT-coated shell case and Teflon-coated threads for longevity and ease of adjustment
• Manufacturer Part Number: VST60-C1SA3-C

Fits 2012-2021 Toyota 86 and Subaru BRZ.

The Tein RX1 coilover system provides a high-performance suspension upgrade for the ZN6 and ZC6 chassis. This kit replaces the factory struts and springs with full-length adjustable dampers, allowing you to lower the vehicle's center of gravity and fine-tune its stance without sacrificing damper stroke. The RX1 series is engineered to handle the demands of spirited driving while maintaining composed ride quality, making it an ideal solution for enthusiasts looking to improve the handling dynamics of their 86 or BRZ.

• Full-length ride height adjustment allows independent tuning of height and spring preload
• Equipped with Tein Hydraulic Bump Stopper (HBS) technology to absorb high-impact loads
• 16-level damping force adjustment for precise control over ride characteristics
• High-tensile strength springs and durable powder-coated damper bodies
• Designed to bolt directly to factory mounting points
• Manufacturer Part Number: VSQ54-M1SS4

Fits 2006-2010 Scion tC (ANT10L).

Tein Flex Z coilovers deliver a high-performance suspension solution that balances daily street comfort with aggressive handling. This full-length adjustable system allows you to set your desired ride height without compromising suspension stroke or spring preload. Utilizing a twin-tube internal design, the Flex Z series provides a smooth ride over varied road surfaces while maintaining the damping control required for spirited driving.

The 16-level linear damping adjustment allows for precise tuning of the compression and rebound settings, making it easy to transition from a comfortable commute to a rigid track setup. These units feature Tein's signature green powder coating and ZT-coated threads for maximum corrosion resistance in harsh environments.

• Manufacturer Part Number: VSL52-CUSA4-C
• System Type: Twin-tube for improved ride quality and stroke
• Damping: 16-way adjustable damping force (EDFC compatible)
• Height Adjustment: Full-length adjustable shell case for independent height and preload
• Mounts: Includes reinforced rubber or pillow ball upper mounts where applicable
• Finish: Powder-coated body with ZT-coated threads for durability

Fits 1992-2002 Honda Prelude (BB1, BB2, BB6, and BB7) models.

The Tein Flex Z coilover kit provides a comprehensive suspension solution for Prelude owners seeking a balance of street comfort and aggressive handling. This full-length adjustable system allows you to set your desired ride height independently of spring preload, ensuring you maintain full suspension stroke even at lower settings. Built with a twin-tube internal structure, these coilovers are designed to absorb road irregularities effectively, making them ideal for daily driving and spirited weekend use.

• 16-level linear damping force adjustment (combined compression and rebound)
• Twin-tube system for improved ride quality on various road surfaces
• Full-length ride height adjustment system with minimal change in ride comfort
• Complete kit includes front and rear coilovers with integrated upper mounts
• Finished in Tein’s signature green powder coat for superior corrosion resistance
• Manufacturer Part Number: VSH92-C1SA3-C

Fits 2016-2020 Lexus GS-F.

RS-R Best-i Active Series coilovers are engineered specifically for owners who want to lower their vehicle without sacrificing the factory Adaptive Variable Suspension (AVS) functionality. Unlike standard coilover kits that require an AVS delete, the Active series features specialized damper internals and mounting for the factory actuators, allowing you to maintain full control of your suspension modes from the cockpit.

Built to provide a balance of performance and comfort, these coilovers utilize high-quality internal components and refined valving to reduce body roll and improve steering response. The full-length adjustment design allows for independent ride height and spring preload settings, ensuring you can achieve the perfect stance while maintaining full suspension stroke.

• Retains factory Lexus Adaptive Variable Suspension (AVS) system compatibility
• Full-length height adjustment for precise corner balancing and stance
• High-quality steel construction with specialized coatings for corrosion resistance
• Specially formulated damper oil for consistent performance under high thermal loads
• Designed as a direct bolt-on replacement for factory struts and springs
• Manufacturer Part Number: XLIT997MA

Fits 2024-2025 Toyota Tacoma SR, SR5, Limited, Trailhunter, and TRD models.

Old Man Emu BP-51 Internal Bypass Coilovers bring race-proven technology to your 2024-2025 Toyota Tacoma, offering a level of ride control and comfort that standard shock absorbers cannot match. These user-adjustable dampers utilize position-sensitive internal bypass technology to provide a plush ride during normal travel and significantly increased damping at the extremes of the stroke to prevent bottoming out. With 10 levels of independent compression and rebound adjustment, you can fine-tune your suspension on the vehicle to account for heavy equipment, varied terrain, or load-carrying requirements.

• Internal Bypass Technology: Position-sensitive damping provides a smooth ride over small bumps while increasing resistance as the shock compresses further.
• Independent Adjustment: Features 10 levels of compression and 10 levels of rebound damping to customize your ride for any weight or road condition.
• Advanced Construction: 6061-grade aluminum bodies with a Type III hard-anodized finish for superior heat dissipation and corrosion resistance.
• Remote Reservoir: External oil reservoir increases oil capacity to prevent overheating and shock fade during high-intensity off-road use.
• High-Quality Hardware: Includes all necessary mounting components for a direct replacement of the factory suspension system.
• Manufacturer Part Number: 1213K

Fits 2024-2025 Toyota Tacoma models including SR, SR5, Limited, TRD Sport, TRD Off-Road, TRD Pro, and Trailhunter.

Old Man Emu BP-51 coilovers represent a significant leap in suspension technology for the fourth-generation Tacoma. These user-adjustable internal bypass shock absorbers provide position-sensitive damping, allowing for a plush ride during normal travel while increasing stiffness at the end of the stroke to prevent bottoming out. Designed for the rigors of off-road use, the BP-51 series allows for independent on-vehicle tuning of both compression and rebound to accommodate varying loads and terrain types.

• Internal Bypass Technology: Provides position-sensitive damping for superior comfort and control across all suspension zones.
• Independent Adjustment: 10 levels of compression and 10 levels of rebound adjustment can be dialed in while mounted on the vehicle.
• Premium Construction: 6061-grade aluminum shock body with a Type III hard-anodized finish for maximum heat dissipation and corrosion resistance.
• Remote Reservoir: External oil reservoir increases oil capacity, aiding in cooling during extended high-speed off-road sections.
• Direct Fit: Engineered as a direct replacement for factory suspension systems, compatible with 2024+ Tacoma geometry.
• Manufacturer Part Number: 1212K

This King Shocks Rear 3.0 IBP Coilover is engineered to provide professional-level damping for the Can-Am Maverick X3 platform. Utilizing a massive 3-inch diameter shock body, this monotube coilover increases fluid capacity to ensure cooler operating temperatures and consistent performance during aggressive driving. The Internal Bypass (IBP) technology delivers position-sensitive damping, providing a plush ride over small chatter while ramping up control through deep whoops and heavy landings.

• Large 3.0-inch diameter shock bodies for increased fluid capacity and cooling
• 2.5-inch Wide Range Compression Adjuster provides 20 precise clicks of tuning
• Internal Bypass (IBP) delivers velocity and position-sensitive damping
• Finned external reservoirs maximize heat dissipation and sustained performance
• Monotube design with full-diameter piston and race-series valving
• 100% bolt-on installation with adjustable ride height
• Fully rebuildable, serviceable, and tunable design
• Manufacturer Part Number: 33700-131A

Fits 2017-2025 Ford F-150 Raptor 4WD.

King Shocks OEM Performance kits are custom-tuned to provide your Raptor with professional-grade damping and ride quality. These 3.0-inch diameter coilovers feature internal bypass technology, delivering both velocity-sensitive and position-sensitive damping to handle aggressive off-road terrain and daily street driving with equal composure. The external finned reservoirs significantly increase fluid capacity and surface area for heat dissipation, preventing shock fade during sustained high-speed use.

Each kit is a 100% bolt-on installation requiring no cutting or welding. The integrated wide-range compression adjuster offers 30 precise clicks of adjustment, allowing you to fine-tune your suspension for specific terrain or cargo loads. Built to the same tolerances as the Pure Race series, these shocks are fully rebuildable and serviceable for long-term durability.

• Large 3.0-inch diameter shock bodies increase fluid capacity for cooler operation.
• 30-click compression adjuster provides precise damping control.
• External finned reservoirs improve heat management and sustained performance.
• Heavy-duty 3/4-inch top bearing and 1-inch lower bearing for superior strength.
• Monotube design with full-diameter piston and standard, full-size valving.
• Fully rebuildable, serviceable, and tunable components.
• Manufacturer Part Number: 30001-403

Fits 2022-2025 Toyota Tundra (SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone).

King Shocks OEM Performance kits are engineered to provide a bolt-on suspension upgrade that significantly improves damping control and ride quality for the 2022-2025 Toyota Tundra. These 2.5-inch diameter front coilovers feature external remote reservoirs that increase fluid capacity and heat dissipation, ensuring consistent performance during sustained off-road use. Each shock is built to the same precise tolerances as King's Pure Race series and is fully rebuildable, serviceable, and tunable for specific terrain or vehicle loads.

• Large 2.5-inch shock bodies for increased fluid capacity and cooler operation
• External reservoirs for superior heat dissipation and sustained damping
• Extruded 6061-T6 aluminum reservoir mounts for secure, clamp-free installation
• Adjustable ride height and increased wheel travel
• Threaded end cap design with protective Schrader valve caps
• 100% bolt-on performance; no cutting or welding required
• Manufacturer Part Number: 25001-396

Fits 2010-2025 Toyota 4Runner models equipped with the Kinetic Dynamic Suspension System (KDSS).

King Shocks OEM Performance Series coilovers deliver professional-grade damping for your Toyota, providing a custom-tuned ride that handles both high-speed desert washouts and technical rock crawling. These 2.5-inch diameter shocks feature external reservoirs that significantly increase fluid capacity and heat dissipation, preventing fade during sustained use. The wide-range compression adjusters provide 20 precise clicks of adjustment, allowing you to instantly adapt the suspension for heavy gear loads, towing, or varying off-road conditions.

• Massive 2.5" Bodies: Increased fluid volume for smoother operation and cooler running temperatures.
• Compression Adjusters: External 20-click knobs for precise damping control without tools.
• Remote Reservoirs: External tanks maximize cooling and ensure consistent performance on long trails.
• Adjustable Ride Height: Threaded shock bodies allow you to level your vehicle or clear larger tires.
• Serviceable Design: Fully rebuildable and tunable using standard tools for a lifetime of service.
• Race-Grade Materials: Built to the same exacting tolerances as King's Pure Race Series shocks.

Specifications:
MPN: 25001-243A-EXT
Shock Diameter: 2.5 in.
Configuration: Front Pair
Includes: Remote Reservoirs and Mounting Hardware

Fits 2017-2022 Chevrolet Colorado ZR2.

King Shocks OEM Performance kits are engineered to provide the Chevrolet Colorado ZR2 with professional-grade damping and superior ride quality. Each coilover kit is subjected to rigorous dynamometer and real-world testing to develop vehicle-specific damping curves and spring rates. The 2.5-inch diameter shock bodies significantly increase fluid capacity, which reduces heat build-up and maintains consistent damping performance during high-speed off-road use.

Designed for a 100% bolt-on installation at factory height or with aftermarket lift kits, these coilovers are built to the same tolerances as King’s Pure Race Series shocks. They are fully rebuildable, serviceable, and tunable, allowing for long-term reliability and customization. The front kit provides up to a 25% increase in wheel travel over the factory ZR2 suspension, delivering a significant upgrade for both technical trails and daily drivability.

• Large 2.5-inch shock bodies for cooler operation and increased fluid capacity
• Remote reservoir design ensures consistent damping over rough terrain
• Up to 25% increase in wheel travel over factory specifications
• Fully rebuildable, tunable, and serviceable design
• Adjustable front ride height for leveled or lifted applications
• 100% bolt-on performance with all necessary mounting hardware included
• Optional 2.5 Wide Range Compression Adjuster for 20 clicks of precise damping control
• Manufacturer Part Number: 25001-192

Fits select 2009-2025 Toyota 4Runner, FJ Cruiser, and Land Cruiser models.

Upgrade your vehicle’s front suspension with King Shocks OEM Performance Series coilovers. These 2.5-inch diameter shocks are engineered to provide a significant increase in damping force and heat capacity over factory equipment. Each kit is custom-tuned to develop the optimal damping curve and spring rate for the Toyota platform, ensuring a controlled ride on the highway and superior bottom-out resistance during off-road use.

The external remote reservoirs significantly increase fluid capacity to improve heat dissipation and prevent shock fade during sustained cycles. For drivers who frequently adjust their vehicle's load—such as adding winches, bumpers, or gear—the included Wide Range Compression Adjuster offers 20 precise clicks of damping adjustment. These coilovers are a 100% bolt-on solution, mounting to factory locations without the need for welding or cutting.

• Large 2.5-inch shock bodies for increased fluid capacity and cooler operation
• Remote reservoirs provide sustained damping performance under high-stress conditions
• 2.5 Wide Range Compression Adjuster with 20 precise clicks of adjustment
• Adjustable front ride height to level the vehicle or clear larger tires
• Built to the same precise tolerances as King’s Pure Race Series shocks
• Fully rebuildable, serviceable, and tunable for long-term performance
• Includes all necessary mounting hardware and brackets
• Manufacturer Part Number: 25001-133A

Fits select 2009-2025 Toyota 4Runner, FJ Cruiser, and Land Cruiser models.

King Shocks OEM Performance kits are engineered to provide your Toyota with professional-grade damping technology in a 100% bolt-on package. These front coilovers feature large 2.5-inch diameter shock bodies and external remote reservoirs, significantly increasing fluid capacity and heat dissipation to prevent shock fade during sustained off-road use. Each kit is custom-tuned through rigorous dynamometer and real-world testing to establish the ideal damping curve and spring rate for your vehicle's specific chassis geometry.

Constructed using the same materials and precise tolerances found in King’s Pure Race series, these shocks offer increased wheel travel and a significant improvement in ride quality both on and off the trail. The adjustable ride height allows you to level your stance or accommodate additional front-end weight from aftermarket bumpers and winches.

• Large 2.5-inch shock bodies increase oil capacity for cooler operation
• External remote reservoirs provide sustained damping performance and heat management
• Adjustable ride height for custom suspension leveling
• Increased wheel travel over factory components
• Fully rebuildable, serviceable, and tunable design
• 100% bolt-on performance using factory mounting locations
• Includes all necessary mounting hardware and brackets
• Manufacturer Part Number: 25001-133-EXT

Fits select 2019-2025 BMW 330i, 330e, M340i, and 430i xDrive models (Base submodels) equipped with factory electronic suspension.

The Bilstein EVO SE represents the next evolution in performance suspension tuning for vehicles equipped with factory electronic damping control. This kit is a true plug-and-play solution, designed to integrate seamlessly with your BMW's original equipment (OE) systems. By utilizing the factory electronic controls, you maintain the ability to adjust damping characteristics through your vehicle's drive mode settings while gaining the superior handling of a performance coilover.

Each EVO SE kit features high-quality threaded dampers that allow for a customized ride height, offering up to 70mm of lowering. This reduction in center of gravity, combined with specific application tuning tested on the Nürburgring, provides greater stability, improved traction, and higher cornering speeds. Built in Germany, these dampers are double-tested to ensure a more satisfying driving experience than the factory setup.

• Direct-fit, plug-and-play integration with factory electronic damping systems
• Ride height adjustability with up to 70mm of lowering capacity
• High-quality threaded performance dampers for precise tuning
• German-engineered and Nürburgring tested for optimal handling
• Enhanced stability and cornering performance without sacrificing OE electronic functionality

Fits 2015-2016 Volkswagen Golf, Golf R, and Golf SportWagen models equipped with a 50mm outside diameter strut.

Bilstein B14 (PSS) suspension kits provide race-inspired handling and ride height adjustability in a direct-fit, OE-quality package. Engineered for the enthusiast who demands better cornering performance without sacrificing durability, these kits feature monotube gas pressure dampers paired with matched springs specifically tuned for the MK7 chassis. The threaded body design allows you to fine-tune your vehicle's stance for the perfect balance of aesthetics and center-of-gravity management.

Built in Germany and tested on the Nürburgring, the B14 system utilizes Bilstein’s Triple-C-Technology surface coating for exceptional corrosion resistance against road salts and debris. The monotube design ensures consistent, fade-free damping performance under spirited driving conditions.

• Threaded body allows for lowering of approximately 30mm to 50mm
• Monotube gas pressure construction for superior heat dissipation and damping control
• Triple-C-Technology surface coating for long-lasting corrosion resistance
• Zinc-plated strut bodies for durability in harsh environments
• Includes matched performance springs and all necessary hardware for installation
• Engineered and tested under motorsport conditions

Fits 2008-2015 Audi TT, TT Quattro, TT RS Quattro, and TTS Quattro.

The Bilstein B14 (PSS) suspension kit delivers track-inspired performance and an aggressive stance in a direct-fit package. This system features monotube gas-pressure dampers paired with application-specific progressive rate springs, engineered to provide superior handling and control without sacrificing OE-level durability. The zinc-coated threaded body design allows for fine-tuning your vehicle's ride height to achieve the perfect balance between aesthetics and performance.

• Monotube gas pressure construction for consistent, fade-free performance
• Threaded body allows for adjustable lowering of approximately 30mm to 50mm
• Triple-C-Technology surface coating for long-lasting corrosion resistance
• Matched springs and dampers tuned under motorsport conditions on the Nürburgring
• Precision-engineered in Germany

Fits 2010-2015 Toyota 4Runner (Limited, SR5, Trail, and TRD Pro).

The ARB Old Man Emu BP-51 suspension kit provides a comprehensive 2-inch lift solution engineered for 5th Gen 4Runner owners who require precision damping control and heavy-duty load-carrying capacity. These internal bypass shock absorbers allow for independent, on-vehicle adjustment of both compression and rebound, enabling you to fine-tune your ride for varying terrain and cargo requirements. This specific kit is calibrated to handle an additional 0-330lb of front-end weight and a constant 440lb rear load, making it ideal for vehicles equipped with steel bumpers, winches, and rear drawer systems.

• Internal Bypass Technology: Delivers position-sensitive damping for a refined street ride and maximum control during off-road articulation.
• Independent Adjustment: Tool-free external dials for compression and rebound allow for immediate tuning based on vehicle load.
• 6061-T6 Aluminum Bodies: Provides superior heat dissipation and resists corrosion in harsh environments.
• Front Lift Height: 2 inches (engineered for 0-330lb additional load).
• Rear Lift Height: 2 inches (engineered for 440lb constant load).
• Complete Bolt-On Kit: Includes all necessary BP-51 coilovers, shocks, and fitment hardware for a direct replacement of factory components.

Fits 2010-2014 Toyota FJ Cruiser.

The ARB Old Man Emu BP-51 suspension kit delivers professional-grade, position-sensitive damping to the FJ Cruiser platform. This high-performance kit utilizes internal bypass technology to provide a plush ride during normal suspension travel while significantly increasing damping force as the shock approaches full compression or extension. Unlike standard shocks, the BP-51 allows for independent adjustment of both rebound and compression, giving you total control over your vehicle’s handling characteristics across varied terrain and load configurations.

• Front Suspension: 2-inch lift, tuned for 0-330lb constant accessory weight (bumpers/winches)
• Rear Suspension: 2-inch lift, tuned for 0lb constant load
• Body Material: 6061 T6 aircraft-grade aluminum for high heat dissipation and corrosion resistance
• Internal Bypass: Provides position-sensitive damping without the complexity of external tubes
• Adjustability: Tool-free independent compression and rebound adjustment
• Bore Size: Large 51mm bore for increased oil capacity and thermal stability
• Included Hardware: Front coilovers, rear shocks, and vehicle-specific mounting kits

Fits select 2010-2023 Toyota 4Runner models including SR5, Trail, TRD Off-Road, TRD Pro, and Limited.

The ARB Old Man Emu BP-51 (Bypass 51mm diameter) suspension kit brings racing-inspired bypass technology to your daily driver and weekend trail rig. Unlike traditional shocks where damping is only speed-dependent, these internal bypass shocks are position-sensitive. This design provides a plush, compliant ride during normal travel while increasing damping force at the ends of the stroke to prevent harsh bottoming out or topping out during aggressive off-road maneuvers.

Each BP-51 shock is constructed from 6061-T6 aircraft-grade aluminum for superior heat dissipation and corrosion resistance. The system allows for independent, on-vehicle adjustment of both compression and rebound, giving you the ability to tune your suspension for varying loads and terrain without removing the components.

• Front Lift: 2.0-inches
• Front Constant Load: 0-330 lbs
• Rear Lift: 0-inches
• Rear Constant Load: 0 lbs
• Body Material: 6061-T6 Aluminum
• Damping: Independent compression and rebound adjustment
• Bore Diameter: 51mm

Fits 2007-2021 Toyota Tundra models including SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

The ARB Old Man Emu BP-51 (Bypass 51mm) suspension kit offers professional-grade damping technology for Tundra owners who demand high-speed control and plush low-speed ride quality. This kit provides a 2-inch front lift designed to accommodate additional front-end weight between 0 and 330 lbs, such as a bumper or winch, while maintaining factory rear ride height. Unlike standard shock absorbers, BP-51 dampers feature internal bypass technology that allows for position-sensitive damping. This means the ride is soft at ride height for comfort but becomes progressively firmer as the suspension reaches the limits of its travel to prevent bottoming out.

• Internal bypass technology provides position-sensitive damping for superior ride comfort and control
• Independent on-vehicle adjustability for both compression and rebound to suit specific loads or terrain
• High-grade 6061 aluminum bodies for maximum heat dissipation and corrosion resistance
• External reservoirs allow for increased oil capacity and reduced operating temperatures
• Front lift height: 2 inches (calibrated for 0-330lb constant load)
• Rear lift height: 0 inches (calibrated for stock load)
• Includes all necessary vehicle-specific mounting hardware for a bolt-on installation

Fits select 2010-2023 Toyota 4Runner models including SR5, TRD Off-Road, TRD Pro, and Limited.

The ARB Old Man Emu BP-51 (Bypass 51mm) suspension kit delivers professional-grade damping for the 5th Gen 4Runner. Utilizing internal bypass technology, these shock absorbers provide position-sensitive damping: a compliant, comfortable ride during standard road travel and high-force resistance at the end of the stroke to prevent bottoming out during aggressive off-road use. This specific kit is engineered for heavily outfitted overland builds, providing a 2.5-inch front lift for loads up to 330lb and a 2-inch rear lift calibrated for a constant 880lb load from steel bumpers, tire carriers, and drawer systems.

• BP-51 internal bypass technology for position-sensitive damping
• External independent compression and rebound adjustability
• Front Lift: 2.5 inches (0-330lb constant load rating)
• Rear Lift: 2.0 inches (880lb constant load rating)
• 6061-T6 grade hard-anodized aluminum shock bodies for maximum heat dissipation
• Durable dash-6 high-pressure hydraulic hose with heat-resistant fittings
• Includes all necessary application-specific mounting hardware and reservoirs

Fits 2010-2015 Toyota 4Runner Limited, SR5, Trail, and TRD Pro models.

The Old Man Emu BP-51 (Bypass 51mm) suspension system brings professional-grade bypass technology to the 2010-2015 Toyota 4Runner. Unlike traditional shock absorbers that are only velocity-sensitive, BP-51 shocks provide position-sensitive damping through an internal bypass system. This allows for a plush, compliant ride during normal suspension travel while significantly increasing damping force as the shock reaches the end of its stroke to prevent bottoming out. This specific configuration is engineered to provide a 2.5-inch front lift and a 2-inch rear lift, calibrated for vehicles equipped with front accessories and constant heavy rear loads.

• Front Lift: 2.5 inches (optimized for 0-330lb constant load)
• Rear Lift: 2.0 inches (optimized for 440lb constant load)
• Adjustability: Independent on-vehicle adjustment of both compression and rebound damping
• Construction: 6061-T6 aircraft-grade aluminum shock bodies for superior heat dissipation and corrosion resistance
• Bore Size: 51mm internal bore for high oil volume and thermal stability
• Performance: Position-sensitive damping for superior comfort and control on technical terrain
• Compatibility: Direct bolt-on replacement for factory suspension components