Fits 2009-2016 Audi A4 Avant Quattro, A4 Allroad, and A7 Quattro.

The H&R Street Performance Coil Over kit is an engineered suspension solution for drivers who demand improved handling without compromising daily ride comfort. Each kit features custom-valved shocks specifically tuned to work in harmony with H&R progressive rate springs, providing a balanced, high-performance suspension system that replaces the factory strut and spring assembly.

Constructed with fully threaded shock bodies, this system allows for precise vehicle height adjustments. By lowering the center of gravity and allowing for corner weight balancing, these coilovers significantly improve vehicle control, reduce body roll, and enhance steering response.

• Custom-valved shocks for application-specific damping performance
• Precision-engineered progressive rate springs for superior ride quality
• Fully threaded shock bodies for adjustable ride height and corner balancing
• Reduced body roll and improved center of gravity
• Manufacturer Part Number: 29092-2

Fits 2019-2022 BMW 330i xDrive Sedan and 2021-2022 BMW 430i xDrive Coupe models without adaptive suspension.

H&R Street Performance Coilovers are engineered for drivers who demand improved handling and a lower center of gravity without compromising ride quality. This suspension system replaces the factory struts and springs with custom-valved dampers and precision-wound progressive rate springs. The fully threaded shock bodies allow for precise vehicle height adjustments, enabling you to balance vehicle weight and achieve a custom stance.

• Application-specific custom valving for balanced damping
• Progressive rate springs maintain ride comfort while improving cornering
• Fully threaded shock bodies for fine-tuned ride height adjustment
• Zinc-phosphate coated shock bodies for enhanced corrosion resistance
• Specifically designed for models without factory adaptive suspension systems
• Manufacturer Part Number: 28658-5

Fits select 1968-1972 Buick Skylark/Special, Chevrolet Chevelle/El Camino, GMC Sprint, Oldsmobile 442/Cutlass, and Pontiac GTO/LeMans/Tempest.

The QA1 GM Pro Coil System offers independent control over compression and rebound valving, allowing you to fine-tune your suspension for specific driving conditions, whether on the street, drag strip, or autocross course. This double-adjustable system features a lightweight billet aluminum shock body with a fully threaded exterior for precise ride height adjustments, allowing for up to a 2-inch drop to achieve the ideal stance and weight balance.

This kit includes QA1 High Travel springs, which are engineered with a smaller wire diameter and fewer coils to reduce unsprung weight and provide increased travel compared to traditional springs. Every shock is 100% dyno-tested and serialized to ensure consistent performance out of the box. Designed for a direct bolt-in installation, these coil-overs work seamlessly with factory or QA1 tubular control arms.

• Manufacturer Part Number: GD401-10450B
• Adjustment Type: Double Adjustable (Independent Compression & Rebound)
• Spring Rate: 450 lbs/in
• Spring Length: 10 inches
• Shock Material: Billet Aluminum
• Installation: Bolt-in; no welding or cutting required
• Serviceability: Fully rebuildable and serviceable by QA1 authorized centers
• Warranty: Limited Lifetime Warranty
• Origin: Made in the USA

Fits 2024-2026 Toyota Land Cruiser 1958, Base, and First Edition models (2.4L).

The Eibach Pro-Truck Coilover 2.0 system is engineered to provide improved control during on-road transit while maintaining the compliance necessary for maximum traction on technical trails. Utilizing an extended-travel monotube design, these front coilovers feature nitrogen-filled variable force valving to adapt to changing terrain. The system comes pre-assembled with ERO Off-Road Race Springs, allowing for a direct factory replacement that bolts into the factory mounting points without additional modifications.

• 46mm piston with monotube nitrogen-filled design
• Anodized 6061-T6 billet aluminum mounts for superior strength
• Adjustable threaded spring perch to accommodate increased loads and maximum clearance
• Equipped with Eibach ERO Off-Road Race Springs
• Heavy-duty bushing system cycle-tested for long-term reliability
• Individually dyno-tested for matched performance and consistency
• Pre-assembled for direct-fit replacement; sold in pairs
• Manufactured by Eibach in the U.S.A.
• Manufacturer Part Number: E86-82-108-01-20

Fits 2019-2025 BMW 330i xDrive, 2021-2025 430i xDrive, and 2020-2022 M340i xDrive models.

The Bilstein EVO S Coilover kit (MPN: 47-304932) is engineered for drivers who demand a sportier look and improved handling without sacrificing daily drivability. This system replaces the factory suspension with a direct-fit, threaded-body damper package designed specifically for the G20 and G22 xDrive chassis. The EVO S series provides a more connected driving experience through application-specific tuning that has been rigorously tested on the Nürburgring.

Constructed with durability in mind, these coilovers feature zinc-plated housings to resist corrosion and ensure the threaded height adjustment remains functional over time. The redesign allows for extreme lowering of up to 70mm, giving you the flexibility to dial in the perfect stance while maintaining technical certification and safety standards.

• Ride Height Adjustment: Allows for lowering up to 70mm from factory height
• Street-Specific Tuning: Double-tested damper settings optimized for comfort and sporty handling
• Corrosion Resistance: Zinc-plated threaded bodies for long-term durability
• Quality Engineering: Designed and manufactured in Germany for precise OE fitment
• Tested Performance: Valving profile tuned on the Nürburgring for maximum driver feedback
• Manufacturer Part Number: 47-304932

Fits 2000-2009 Honda S2000 Base and CR models.

The Bilstein B14 (PSS) Performance Suspension System provides precision-engineered ride height adjustability in a direct-fit, OE-quality package. This kit features monotube gas pressure dampers paired with application-specific performance springs, tuned to enhance the handling dynamics of the Honda S2000 chassis. The threaded body design allows you to fine-tune your vehicle's stance for optimal center of gravity and aesthetics without compromising damper travel.

• Provides a lowering range of approximately 30mm to 50mm
• Monotube gas pressure construction for consistent, fade-free performance
• Zinc-coated threaded bodies with Triple-C-Technology for superior corrosion resistance
• Matched performance springs tuned for the Honda S2000
• Engineered and road-tested on the Nürburgring
• Made in Germany
• Manufacturer Part Number: 47-080386

Fits 2016-2023 Nissan Titan XD (S, SV, SL, PRO-4X, Platinum Reserve) 2WD and 4WD models.

The ICON Vehicle Dynamics Stage 1 suspension system is engineered to bridge the gap between heavy-duty work capability and off-road performance. Designed from the ground up for the Nissan Titan XD, this 100% bolt-on system provides approximately 32% increased front wheel travel over stock while significantly improving ride quality on and off the pavement without reducing towing capacity.

This system centers on ICON 2.5 Series front coilovers featuring CAD-plated shock bodies and a massive 7/8-inch shaft for maximum durability. These coilovers are paired with ICON 2.0 Aluminum Series rear shocks, featuring 5/8-inch shafts and a corrosion-resistant anodized finish. Both front and rear shocks are vehicle-specific valved to provide superior damping control. The kit is rounded out with rear lift blocks and heavy-duty U-bolts to level the stance and accommodate larger wheel and tire combinations.

• Adjustable front coilovers provide 2.5-3 inches of lift height
• Approximately 32% increased front wheel travel over stock
• 2.5 Series front coilovers with CAD plated bodies and 7/8-inch shafts
• 2.0 Aluminum Series rear shocks with 5/8-inch shafts
• FK Rod End bearings for minimal deflection and extended longevity
• CNC machined 6061 aircraft-grade aluminum components
• 100% bolt-on installation; no cutting or welding required
• Manufacturer Part Number: K83031

Fits 2005-2023 Toyota Tacoma models including Base, Limited, Pre Runner, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport, and X-Runner.

The ICON Vehicle Dynamics Stage 6 Suspension System is engineered for the serious driver seeking maximum wheel travel and superior damping control. This comprehensive kit features vehicle-specific tuned 2.5-inch Extended Travel coilover shocks with remote reservoirs. Equipped with ICON’s Compression Damping Control Valve (CDCV), these shocks provide 10 unique settings to fine-tune ride firmness. Front lift is adjustable from 0-3.5 inches on 2005-2015 models and 0-2.75 inches on 2016-2023 models, allowing clearance for larger wheel and tire combinations.

This system includes ICON billet aluminum upper control arms (UCAs) featuring the patented Delta Joint. These arms correct front-end geometry and provide increased caster and camber adjustment for improved drivability and component clearance. In the rear, the kit utilizes 2.5 Aluminum Series Remote Reservoir shocks with CDCV paired with a rear Add-A-Leaf kit. The Add-A-Leaf replaces the factory overload leaves to lower the spring rate by approximately 10% for a more compliant ride while providing 1.5 inches of rear lift.

• Manufacturer Part Number: K53006
• 2.5 Series front coilovers with remote reservoirs and CDCV
• Billet 6061 aircraft-grade aluminum CNC machined UCAs with Delta Joint
• 2.5 Aluminum Series remote reservoir rear shocks with 7/8-inch shafts
• Adjustable 10-setting compression damping via CDC Valves
• Extended travel design for maximum wheel articulation
• Corrosion-resistant CAD plated coilover bodies
• FK Rod End bearings for extended longevity and minimal deflection
• Rear Add-A-Leaf kit for 1.5-inch lift and improved compliance

Fits select 1992-2000 Lexus SC300, SC400, and 1993-1998 Toyota Supra Twin Turbo models.

The Tein Street Basis Z is an entry-level coilover system designed to provide a balanced combination of street comfort and improved handling. This suspension kit allows for ride height adjustability to achieve a lower center of gravity and a more aggressive stance. Utilizing a twin-tube internal design, the Street Basis Z provides a longer stroke compared to mono-tube alternatives, ensuring better compliance over uneven road surfaces. Each damper features a sealed structure and high-performance oil for consistent damping characteristics.

• Manufacturer Part Number: GST60-81SS2
• Twin-tube internal structure for superior ride quality and control
• Thread-type ride height adjustment via the spring seat
• Z-Type sealed structure for maximum durability and reliability
• Uses OE factory mounts for simplified installation
• High-tensile strength cold-formed springs for resistance to sagging
• Finished in Tein’s signature green powder coat for corrosion resistance

Fits 1990-1993 Acura Integra (DA9) models. This Tein Street Basis Z coilover kit is designed to provide a balanced combination of ride comfort and improved handling for daily driven vehicles.

The Street Basis Z series utilizes a twin-tube system for a longer stroke and better damping response on uneven surfaces. This kit features a thread-type ride height adjustment mechanism, allowing you to lower your center of gravity and customize your vehicle's stance without sacrificing drivability. The dampers are finished with Tein's proprietary green powder coating, while the threaded sections feature a specialized ZT coating for superior corrosion resistance against road salts and debris.

• Fits 1990-1993 Acura Integra (DA9)
• Twin-tube internal construction for street comfort
• Steel construction with ZT coating for durability
• Utilizes original equipment (OE) upper mounts
• Ride height adjustable via threaded shock body
• Manufacturer Part Number: GSA32-8USS2

Fits 2001-2005 Honda Civic DX, EX, GX, HX, LX, Si, and Value Package models across the EM2, ES1, ES2, and EP3 chassis.

Tein Street Basis Z coilovers are engineered to provide a balanced combination of ride comfort and improved handling for street driving. This suspension system features a thread-type ride height adjustment, allowing you to set your vehicle's stance to your preference. The twin-tube internal structure ensures a smooth stroke and reliable performance over varied road surfaces. Built with Tein's high-quality manufacturing standards, these coilovers utilize a sealed structure for durability and cost-effective performance.

• Manufacturer Part Number: GSA22-8USS2
• Series: Street Basis Z
• Configuration: Full kit (set of 4)
• Adjustment: Thread-type ride height adjustment
• Design: Twin-tube internal construction
• Compatibility: Replaces factory shock and spring assembly

The Tein Street Advance Z coilover kit provides a customizable ride height and damping experience for select 1990-1999 Honda Accord and Acura CL models. Designed for drivers seeking a balance between improved handling and daily comfort, the Street Advance Z series utilizes a twin-tube internal system for a smoother stroke and better response on varied road surfaces.

This suspension system features 16 levels of linear damping force adjustment, allowing you to fine-tune the compression and rebound to your preferred stiffness. The sealed-structure design ensures long-term reliability and performance, while the ZT-coated adjustment threads provide superior corrosion resistance during ride height changes.

• Fits select 1990-1999 Honda Accord and Acura CL
• 16-level damping force adjustment (compression and rebound combined)
• Twin-tube internal construction for ride comfort
• Threaded sleeve height adjustment with ZT coating
• Compatible with EDFC (Electronic Damping Force Controller) for in-cabin adjustment
• Manufacturer Part Number: GSA16-9USS2

Fits select 2007-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks (including 2019 Silverado LD and Sierra 1500 Limited).

Upgrade your truck's rear suspension with the Ridetech HQ (Handling Quality) Series Coilover system. These rear coilovers are designed specifically for use with the Ridetech 4-Link system, providing a massive improvement in ride quality and handling characteristics over factory leaf springs. Each shock features rebound adjustment, allowing you to fine-tune the damping with a simple turn of a knob to match your specific driving style or load conditions.

Built with precision components, this kit includes Delrin spring washers that eliminate spring bind and friction during compression, ensuring smooth and quiet operation. Whether you are building a street performer or a dedicated cruiser, these coilovers deliver the control and stance your truck deserves.

• Specifically engineered for use with Ridetech 4-Link systems
• HQ Series shocks feature 24-position rebound adjustment
• Includes high-tensile coil springs and mounting hardware
• Delrin spring washers reduce friction and noise
• Direct replacement components for 4-Link conversion
• Manufacturer Part Number: 11706510

Fits 1963-1972 Chevrolet C10 Pickup models.

The QA1 RCK52616 rear coil-over conversion system modernizes your 1963-1972 C10 suspension while retaining the factory truck arms. This bolt-on kit replaces original coil springs with double adjustable coil-overs, providing independent control over compression and rebound valving to dial in precise ride quality and handling performance. By relocating the coil-overs to the outside of the frame rails, closer to the wheels, this system increases cornering stability and provides additional clearance for aftermarket rear-mounted fuel tanks.

Engineered for precision, the included adjustable panhard bar keeps the rear axle centered and allows for roll center geometry correction based on your desired drop. The 200 lbs/in spring rate is optimized for medium-duty applications, offering a balance between street comfort and performance driving. Installation is a direct bolt-on process that can be completed without removing the truck bed.

• Manufacturer Part Number: RCK52616
• Shock Type: Double Adjustable (Independent Compression and Rebound Valving)
• Spring Rate: 200 lbs/in (Medium)
• Mounting: Relocated outside frame rails for improved stability
• Includes adjustable panhard bar for corrected roll center geometry
• Compatible with factory truck arms
• Made in the USA

Fits select 1958-1996 Chevrolet (Bel Air, Biscayne, Caprice, Impala), Ford (Galaxie), and Mercury (Monterey, Marauder, Meteor) models. This QA1 GM Pro Coil-Over System (MPN: GS507-10450C) provides a direct-fit solution for drivers seeking to modernize their front suspension with adjustable ride height and valving control.

The system features single-adjustable billet aluminum shocks, allowing you to simultaneously tune compression and rebound settings with a single knob. The included 10-inch high-travel springs utilize a 450lb/in rate, designed with fewer coils and a smaller wire diameter to maximize suspension travel while reducing unsprung weight. This combination enables up to 2 inches of ride height adjustment, allowing you to dial in the perfect stance or optimize weight balance for better handling.

• Single Adjustable Valving: Adjust rebound and compression simultaneously for balanced ride quality.
• Billet Aluminum Construction: Lightweight, durable, and 100% dyno tested and serialized.
• High-Travel Springs: American-made springs designed for increased travel and faster reaction times.
• Ride Height Adjustable: Threaded shock bodies allow for up to 2 inches of height adjustment.
• Easy Installation: Bolt-in design compatible with factory or QA1 tubular control arms.
• Serviceable Design: Fully rebuildable by QA1 authorized service centers for long-term reliability.
• Included Hardware: Sold in pairs with a limited lifetime warranty.

Fits select 2013-2025 Subaru BRZ, Toyota 86, Toyota GR86, and Scion FR-S models.

The Pedders Extreme Xa Coilover Kit is engineered for the automotive enthusiast who requires a versatile suspension solution that bridges the gap between daily street civility and track-day performance. Unlike standard lowering kits, the Extreme Xa features fully threaded monotube bodies, allowing for precise ride height adjustment without sacrificing suspension travel or spring preload. This ensures that even at a lower stance, the dampers retain their full stroke for superior bump absorption.

Equipped with 30 levels of damping adjustment, this kit allows drivers to fine-tune the rebound and compression with a simple click to suit varying road conditions or track layouts. The monotube design provides a larger oil capacity and greater heat dissipation compared to twin-tube counterparts, maintaining consistent damping performance during high-intensity use.

• Manufacturer Part Number: PED-160083
• Construction: Fully threaded monotube body for independent ride height adjustment
• Damping: 30 levels of adjustable damping
• Front Spring Rate: 6 kg/mm
• Rear Spring Rate: 5 kg/mm
• Mounting: Factory-style mounts for a direct-fit installation

Fits 2022-2025 Subaru WRX (VB) models including Base, GT, Limited, Premium, TR, and TS; excludes models equipped with factory electronic damping.

The Öhlins Road & Track suspension system is engineered to provide track-level performance without sacrificing the ride quality required for daily driving. Utilizing patented Dual Flow Valve (DFV) technology, these dampers react quickly to surface irregularities, maintaining consistent tire contact and chassis stability. The DFV system allows the suspension to remain supple over sharp bumps while providing the firm control needed for high-speed cornering.

Built with a focus on durability and thermal management, the system features a monotube damper architecture. The front assemblies use a strengthened inverted strut design to resist lateral deflection under heavy loading, while the rear shocks utilize lightweight aluminum bodies for improved cooling and reduced unsprung weight. With 20+ clicks of damping adjustment and independent ride height control, drivers can precisely calibrate the vehicle's handling balance and stance.

• Patented DFV Technology: Dual Flow Valves ensure consistent damping during both compression and rebound strokes.
• Monotube Construction: High-pressure gas and oil separation for sensitive, fade-free damping response.
• Inverted Strut Design: Increases rigidity and reduces friction in front suspension geometry.
• Adjustability: 20+ click damping adjustment and full ride height adjustability.
• Lightweight Materials: Aluminum shock bodies for optimized cooling and weight reduction.
• Warranty: Protected by a two-year manufacturer warranty.
• Manufacturer Part Number: SUS MX00S1

Fits select 2007-2019 Chevrolet Silverado 1500, Suburban, Tahoe, and GMC Sierra 1500. This Fox 2.5 Performance Series IFP (Internal Floating Piston) front coilover provides 2-3 inches of front lift, delivering increased ground clearance and room for larger tires while significantly improving damping performance for both on-road stability and off-road control.

Constructed with a 2.5-inch impact-extruded 6061-T6 aluminum body, this unit offers superior heat dissipation compared to traditional steel shocks. The internal floating piston design separates the shock oil from the high-pressure nitrogen gas, preventing oil aeration and ensuring fade-free performance across varying terrain. Each coilover features application-specific tuning and high-flow velocity-sensitive damping to optimize the ride quality of GM's half-ton chassis.

• Lift Height: Provides 2-3 inches of front suspension lift.
• Shock Body: 2.5-inch 6061-T6 impact-extruded aluminum with Type II clear-anodized plating.
• Internal Design: Monotube with Internal Floating Piston (IFP) to eliminate oil aeration.
• Shaft: 5/8-inch hard chrome-plated, heat-treated alloy steel.
• Valving: High-flow, velocity-sensitive damping for application-specific control.
• Serviceability: Fully rebuildable and re-tunable internal components.
• MPN: 887-02-012

Important Installation Note: For 2016-2018 model year trucks, cast aluminum lower control arms (OE reference 22853473, 22853474, or equivalent) are required for proper CV boot clearance. Cast steel lower control arms are not compatible with this application for 2016-2018 models due to ball joint taper differences.

Fits 2005-2011 Porsche 911 Carrera and Carrera S (997) RWD models. This system is designed for the driver who demands track-day performance without sacrificing daily drivability.

The Ohlins Road & Track suspension system utilizes proprietary Dual Flow Valve (DFV) technology to provide superior chassis control and rapid response to road imperfections. By allowing the damping fluid to flow through two different paths depending on the piston speed, the DFV system maintains tire contact on rough surfaces while remaining stiff and composed during high-speed cornering. This kit features monotube damper architecture for consistent performance under thermal stress, supported by lightweight aluminum shock bodies and strengthened inverted struts.

• Patented Dual Flow Valve (DFV) technology for optimized ride and handling
• Monotube damper design for improved response and cooling
• 20+ click adjustable damping for precise tuning
• Independent ride height adjustment
• Lightweight aluminum shock bodies with inverted strut architecture
• Corrosion-resistant finish for long-term durability
• Manufacturer Part Number: POS MZ20S1
• Includes two-year limited warranty

Fits all 2015-2023 Ford Mustang models, including EcoBoost, GT, Bullitt, Mach 1, and Shelby GT350/GT500 (V6, I4, V8).

The Öhlins Road & Track suspension system is engineered to provide a track-ready chassis without sacrificing the daily drive. At the heart of this system is the patented Dual Flow Valve (DFV) technology. This internal valving allows the damper to react more quickly to sudden surface changes, maintaining tire contact and vehicle stability over bumps while providing firm, controlled damping during cornering and braking. The result is a refined ride quality that remains composed on the street and aggressive on the circuit.

Construction features a monotube architecture for immediate response and consistent performance. The front dampers utilize an inverted strut design for increased lateral stiffness under heavy cornering loads, while the rear shocks feature lightweight aluminum bodies to improve heat dissipation and reduce unsprung weight. With over 20 clicks of damping adjustment and independent ride height control, you can fine-tune the S550 chassis to your exact grip and aesthetic requirements.

• Manufacturer Part Number: FOS MR00S1
• Patented Dual Flow Valve (DFV) technology
• Individually adjustable damping with 20+ clicker settings
• Ride height adjustable via separate lower brackets
• Inverted front strut design for maximum rigidity
• Lightweight aluminum rear shock bodies for superior cooling
• Monotube damper architecture for high-sensitivity response
• Rebuildable for long-term serviceability
• Two-year manufacturer warranty

Fits 2000-2006 Audi TT Quattro and 2004 Volkswagen R32 Base.

The KW V2 Inox-Line coilover kit is designed for drivers seeking more than just a lowered stance. Featuring KW’s patented TVR-A (Twin Valve Rebound - Adjustable) technology, this kit allows for 16 precise clicks of rebound damping adjustment. This two-stage system uses a conically shaped low-speed bypass for oil flow during slow damper movements, while the main rebound valve opens at higher speeds to manage larger fluid volumes, maintaining ride comfort without sacrificing high-speed body control.

Built for long-term durability, the V2 series features Inox-Line stainless steel strut housings that provide permanent corrosion resistance, ensuring the trapezoid threads remain clean and adjustable for years. Each kit is vehicle-specifically tuned on the Nürburgring Nordschleife and KW’s 7-post driving dynamic test center to ensure optimal spring rates and damper valving.

• TVR-A Technology: 16-way adjustable rebound damping to fine-tune handling and comfort.
• Inox-Line Stainless Steel: 100% corrosion-resistant strut bodies with an unlimited lifespan.
• Composite Spring Perches: Friction-optimized polyamide composite with a stainless steel insert to prevent oxidation and seizing.
• Elastomer Bump Stops: Integrated dust protection system prevents contaminants from reaching the piston rod seals.
• Precision Manufacturing: Hand-built in Fichtenberg, Germany, with each damper dyno-tested for accuracy.

• Manufacturer Part Number: 15280081
• Material: Inox-Line Stainless Steel
• Damping Adjustment: 16-click Rebound (TVR-A)
• Lowering Range: Vehicle-specific approved range

Fits select 2008-2017 Audi A4, A4 Quattro, A5, A5 Quattro, RS5, S4, and S5 models without electronic damping control.

The KW V1 Inox-Line coilover kit is engineered for street performance, providing a balanced, sporty feel through vehicle-specific damping and spring rates. Each kit features Inox-Line stainless steel struts for permanent corrosion resistance, ensuring the trapezoid threads and composite adjustment collars remains functional even after years of exposure to the elements. By reducing body roll during compression, these coilovers deliver more direct handling and a lower center of gravity while maintaining adequate suspension travel for daily driving.

• Inox-Line Stainless Steel: Provides 100% corrosion resistance and an unlimited lifespan compared to galvanized alternatives.
• Pre-set Damping: Optimally tuned by KW engineers for a balance of sportiness and comfort; no manual adjustment required.
• Composite Spring Perches: Wear-resistant polyamide composite with a stainless steel insert prevents oxidation and seizing.
• Elastomer Bump Stops: Integrated dust protection prevents debris from reaching the piston rod and seals.
• Quality Tested: Every damper is dyno-tested and developed using KW's 7-post chassis dynamics test center and Nürburgring Nordschleife testing.
• Manufacturer Part Number: 10210075
• Warranty: Limited Lifetime Warranty with unlimited mileage.

Fits select 1996-2004 Toyota 4Runner and Tacoma models. This King Shocks 2.5 Internal Reservoir Front Coilover kit is a direct-replacement performance upgrade designed to improve damping control and ride quality both on-road and in demanding off-road environments.

Built with 2.5-inch diameter shock bodies, these coilovers provide increased oil capacity and cooling compared to smaller diameter shocks, significantly reducing fade during extended use. The internal reservoir design keeps the setup compact while maintaining the performance benefits of a high-volume nitrogen-charged shock.

• Part Number: 25001-151-EXT
• Shock Diameter: 2.5 inches
• Design: Internal Reservoir
• Position: Front (Pair)
• Adjustable ride height for leveling or lifting
• Direct bolt-on installation using factory mounting points

Vehicle Fitment:

• 1996-2001 Toyota 4Runner Base
• 1996-2002 Toyota 4Runner Limited
• 1996-2002 Toyota 4Runner SR5
• 1996-2004 Toyota Tacoma Base
• 1998 Toyota Tacoma DLX
• 1998-2000 Toyota Tacoma Limited
• 1996-2000 Toyota Tacoma SR5

The ISR Performance Pro Series Coilovers offer a comprehensive suspension solution for the Nissan Skyline R32 GTST, designed to enhance handling precision and provide a fully adjustable ride height. By replacing the aging factory dampers, these coilovers improve chassis response and stability during spirited driving or track sessions. The Pro Series utilizes a mono-tube damper design to ensure consistent performance under load, while the independent adjustment of the lower mount allows for height changes without affecting spring preload or shock travel.

• High-performance mono-tube shock construction for superior heat dissipation
• 32-way damping adjustment for fine-tuning between street and track settings
• Independent ride height and spring preload adjustments
• Bolts directly to factory mounting points with included hardware
• Manufacturer Part Number: IS-PRO-R32

Fits 2024-2025 Toyota Tacoma (Limited, SR5, TRD Off-Road, and TRD Sport).

The ICON Vehicle Dynamics Stage 11 Suspension System is the ultimate performance upgrade for the 2024-2025 Toyota Tacoma, providing a 1.25-3" adjustable front lift and 0.5" rear lift. This system is anchored by ICON 2.5 Series front coilovers and rear shocks, both featuring remote reservoirs and integrated CDC Valves. These valves provide 10 distinct settings of compression damping adjustment to fine-tune your ride for any terrain. The rear shocks include integrated bump zones for increased bottoming resistance during aggressive off-road use.

This kit replaces factory components with CNC-machined 6061 aircraft-grade billet aluminum, including upper control arms (UCAs), adjustable rear links, and an adjustable track bar. The UCAs feature the patented Delta Joint Pro, allowing for 90 degrees of total articulation and corrected front-end geometry. The triple-rate rear coil springs ensure a smooth ride over small chatter while providing a firm overload rate for heavy loads and bottoming resistance.

• Front lift height: 1.25-3" over stock; Rear lift: 0.5"
• ICON Delta Joint Pro (U.S. Pat. 10,731,700) for maximum articulation and durability
• 2.5 Aluminum Series remote reservoir shocks with 10-setting CDC Valves
• Billet aluminum UCAs and rear links with on-vehicle double adjusters
• Billet adjustable rear track bar for precise axle centering
• Front differential drop kit preserves CV joint angles on 4WD models
• Triple-rate rear coil springs for optimized ride quality and load handling
• 7/8" shafts and CAD-plated coilover bodies for extreme durability
• FK Rod End bearings and dual-durometer greaseless bushings
• Manufacturer Part Number: K53301

Fits 2003-2009 Lexus GX470 and Toyota 4Runner/FJ Cruiser.

The ICON Vehicle Dynamics Stage 3 suspension system (MPN: K53053) is a complete performance solution providing 0-3.5 inches of front lift height. This system features ICON's billet aluminum upper control arms equipped with the patented Delta Joint. The Delta Joint is a heavy-duty, high-angle ball joint that combines the extreme articulation of a traditional uniball with the durability of a sealed joint. Its zinc-plated housing and robust grease seal protect internal components from road salts and debris, ensuring noise-free operation in daily driving and off-road environments.

• Extended Travel front coilovers with CAD-plated bodies and 7/8" shafts for increased droop travel
• 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts for superior damping control
• Billet 6061 aircraft-grade aluminum rear lower links for on-vehicle pinion angle adjustment
• CNC-machined components for precise fitment and high strength-to-weight ratio
• FK Rod End bearings for maximum longevity and minimal deflection
• 100% Bolt-on design requires no cutting or welding for installation
• Adjustable front lift height from 0 to 3.5 inches

Fits 2003-2009 Toyota 4Runner, 2007-2009 Toyota FJ Cruiser, and 2003-2009 Lexus GX470.

The ICON Vehicle Dynamics Stage 2 Suspension System (MPN: K53052) is engineered to drastically improve the off-road capability and on-road handling of your vehicle. This system combines adjustable extended-travel coilovers with billet aluminum upper control arms featuring ICON's patented Delta Joint. The Delta Joint is a heavy-duty, high-angle ball joint that offers the articulation of a traditional uniball while providing the weather-sealed longevity of a factory joint, utilizing a zinc-plated housing and a tough grease seal to prevent contamination.

This bolt-on kit replaces worn factory components with CNC-machined 6061 aircraft-grade aluminum and corrosion-resistant CAD-plated shock bodies. The included 2.0 Aluminum Series rear shocks feature 5/8" shafts and internal reservoirs for consistent damping. This system is designed to provide increased wheel travel and a tunable front lift height from 0 to 3.5 inches.

• Adjustable coilovers provide 0-3.5" of front lift height
• Billet 6061 aluminum upper control arms with patented greaseable Delta Joints
• Extended travel coilovers with 7/8" shafts and CAD-plated shock bodies
• 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
• FK Rod End bearings for maximum longevity and minimal deflection
• 100% bolt-on installation; no cutting or welding required
• Vehicle-specific tuning for superior shock damping and control

Fits 2007-2021 Toyota Tundra (Base, SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Trail, and Nightshade).

The ICON Stage 8 Suspension System is a complete handling overhaul for the 2007-2021 Toyota Tundra, engineered to provide 1-3 inches of front lift and significantly increased wheel travel. This system features vehicle-specific tuned 2.5 Series front coilovers with remote reservoirs for superior heat dissipation and Eibach coil springs for a refined ride. The included ICON tubular upper control arms (UCAs) allow for increased droop travel and corrected suspension geometry after lifting.

For the rear, this kit includes ICON RXT multi-rate leaf springs, which offer three user-adjustable spring rates to accommodate varying bed loads—from empty daily driving to fully equipped overland builds with racks and tents. These are paired with 2.5 Aluminum Series RXT remote reservoir shocks, utilizing a unique side-mount eyelet to maximize travel while bolting directly to factory mounting locations. The 10-inch reservoirs ensure consistent damping performance during aggressive off-road use by resisting shock fade.

• Adjustable front coilovers provide 1-3" of lift height
• 2.5 Series front and rear shocks with remote reservoirs for optimal cooling
• ICON tubular upper control arms for increased droop travel
• RXT multi-rate leaf springs with 3 user-adjustable rate configurations
• CAD plated coilover bodies with 7/8" shafts and FK Rod End bearings
• 6061 aircraft grade aluminum CNC machined components
• Impact extruded aluminum rear shock cylinders for corrosion resistance
• 100% Bolt-on installation; no cutting or welding required
• Fully rebuildable and revalveable shock internals
• Manufacturer Part Number: K53028T

Fits select 2005-2023 Toyota Tacoma models (Base, SR, SR5, Pre Runner, TRD Off-Road, TRD Sport, TRD Pro, and X-Runner).

The ICON Vehicle Dynamics Stage 2 suspension system is engineered to provide the serious driver with increased wheel travel and improved damping for both on-road comfort and off-road control. This system centers on vehicle-specific tuned 2.5-inch front coilovers and 2.0 Aluminum Series remote reservoir rear shocks. The front coilovers are height adjustable, offering 0-3.5 inches of lift for 2005-2015 models and 0-2.75 inches for 2016-2023 models, providing clearance for larger wheel and tire packages.

The included rear Add-A-Leaf Kit replaces the factory overload leaves, effectively lowering the rear spring rate by approximately 10% for a more compliant ride while providing 1.5 inches of rear lift. Built for longevity, this bolt-on system utilizes 6061 aircraft-grade aluminum CNC-machined components and corrosion-resistant CAD-plated shock bodies.

• Manufacturer Part Number: K53002
• Front Shocks: 2.5" coilover with 7/8" shafts and internal reservoirs
• Rear Shocks: 2.0 Aluminum Series with 5/8" shafts and remote reservoirs
• FK Rod End bearings for minimal deflection and extended service life
• Bolt-on installation; no cutting or welding required
• ICON-engineered coil springs for superior feel through travel range
• Includes all necessary mounting hardware

Fits 2021-2025 Ford F-150 models including Tremor, XL, XLT, Lariat, King Ranch, Platinum, STX, SSV, and Police Responder.

ICON Vehicle Dynamics V.S. Series 2.5 Remote Reservoir coilovers are engineered to provide maximum wheel travel and superior damping for the 2021-2025 Ford F-150. These coilovers are application-specific, designed to optimize front-end performance on the F-150 Tremor or 4WD F-150 models equipped with ICON’s Front Knuckle Kit. The 2.5-inch diameter shock bodies offer significantly more piston area than stock components, while the remote reservoirs increase oil volume and surface area for improved heat dissipation, preventing shock fade during aggressive off-road use.

This kit provides adjustable lift height, allowing for larger wheel and tire combinations. On Tremor models, it offers 2.5–3 inches of lift; on other F-150 sub-models equipped with the ICON Front Knuckle Kit, it provides 3.5–4.5 inches of lift. The system features a 100% bolt-on design for a straightforward installation with no cutting or welding required.

• Adjustable lift height: 2.5-3" (Tremor) or 3.5-4.5" (F-150 with ICON Knuckle Kit)
• 2.5" diameter CAD plated shock body with 7/8" induction hardened, chrome plated shaft
• Remote reservoirs for increased oil volume and heat dissipation
• 6061 aircraft-grade aluminum CNC machined components
• FK rod end bearings for maximum longevity and minimal deflection
• High-strength alloy CNC machined lower bar pins
• ICON-engineered coil springs
• 100% bolt-on installation
• Manufacturer Part Number: 91824