Nitrous Express R/T Series single jets are precision-engineered for maximum flow consistency in nitrous oxide systems. Each HP jet is manufactured on CNC equipment and guaranteed to be within .0005 of the specified orifice size, ensuring predictable tuning and engine safety for your nitrous-fed application.

The unique design of the R/T jet features a contoured inlet and a multi-stepped outlet. This specialized geometry eliminates the turbulence and restrictions commonly found in standard "drilled hole" jets, promoting a laminar flow profile. This design improvement allows these HP jets to flow up to 35% more than competing jets of the same orifice diameter.

• Orifice Size: .037
• Material: Precision-machined brass
• Series: HP R/T Series
• Design: Contoured inlet with multi-stepped outlet for turbulence-free flow
• Manufacturing: CNC-machined to +/- .0005 tolerance
• Manufacturer Part Number: 17037

Ensure precise nitrous delivery with the Nitrous Express HP Series .033 R/T Single Jet. Unlike standard jets that are simply drilled through brass, the HP series is engineered with a proprietary contoured inlet and multi-stepped outlet. This advanced internal geometry eliminates restrictions and facilitates turbulence-free flow, allowing these jets to outperform competitors by up to 35% through the same orifice size.

Each jet is manufactured using high-precision CNC equipment and is guaranteed to be within .0005 of the specified jet size. This rigorous tolerance provides the consistency required for high-performance tuning, ensuring predictable fueling and nitrous ratios for engine safety and maximum power output.

• Manufacturer Part Number: 17033
• Jet Size: .033
• Series: HP R/T Single Jet
• Material: Precision-machined brass
• Manufacturing: CNC-machined for .0005-inch tolerance
• Flow Design: Contoured inlet with multi-stepped outlet for 35% increased flow

Fine-tune your nitrous system with the precision-engineered Nitrous Express .026 R/T Series Single Jet. Manufactured on CNC equipment, these HP jets are guaranteed to be within .0005 of the specified orifice size, ensuring consistent and predictable tuning for your fueling or nitrous requirements.

Unlike standard jets that are simply a hole drilled through brass, the NX R/T jet features a proprietary contoured inlet and a multi-stepped outlet. This design minimizes restriction and allows for turbulence-free flow, resulting in up to 35% more flow through the same orifice size compared to competitors.

• Manufacturer Part Number: 17026
• Jet Size: .026
• Construction: CNC-machined brass for maximum durability and precision
• Tolerance: Guaranteed within .0005 of specified size
• Design: Contoured inlet and multi-stepped outlet for optimized flow dynamics
• Performance: Engineered to outflow standard orifice designs by up to 35%

Optimizing your nitrous system requires precision fueling and flow consistency. The Nitrous Express (NX) .025 R/T Series Single HP Jet is engineered to surpass standard brass jets through superior fluid dynamics. Manufactured on precision CNC equipment, each jet is guaranteed to remain within .0005 of the specified orifice size, providing the accuracy necessary for high-performance tuning.

The HP jet series is designed with a specialized internal geometry rather than a simple straight-through bore. By utilizing a contoured inlet and a multi-stepped outlet, these jets facilitate turbulence-free flow with minimal restrictions. This advanced design allows the HP jet to outflow competitive designs by as much as 35% through the same orifice size, ensuring your system receives maximum volume without sacrifice.

• Jet Size: .025
• Manufacturer Part Number: 17025
• Construction: CNC-machined brass for extreme durability and precision
• Tolerance: Guaranteed within .0005 of specified size
• Flow Dynamics: Contoured inlet and multi-stepped outlet for 35% higher flow volume
• Series: R/T HP Jet

The Nitrous Express .021 R/T Single Jet (MPN 17021) is a precision-engineered component designed for consistent, high-performance nitrous delivery. Unlike standard jets that are simply drilled through brass, NX HP Jets are manufactured using advanced CNC equipment to maintain a strict tolerance within .0005 of the specified orifice size.

The R/T jet features a specialized internal geometry with a contoured inlet and a multi-stepped outlet. This design is engineered to eliminate restrictions and promote turbulence-free flow, providing up to 35% more flow capacity than competing jets of the same orifice diameter. This superior flow characteristic ensures more predictable tuning and reliable performance for your nitrous system.

• Jet Size: .021
• Manufacturing Process: Precision CNC machined
• Tolerance: Within .0005 of specified size
• Flow Feature: Contoured inlet and multi-stepped outlet
• Material: High-quality brass construction
• Manufacturer Part Number: 17021

Precision tuning requires absolute consistency, and the Nitrous Express HP Series .016 R/T single jet is engineered to provide exactly that. Unlike standard jets that are simply drilled through brass, these HP jets are manufactured on advanced CNC equipment and are guaranteed to maintain a tolerance within .0005 of the specified orifice size. This precision ensures predictable and repeatable performance every time the system is activated.

The NX HP jet is designed for maximum efficiency, featuring a technical contoured inlet and a multi-stepped outlet. This specific geometry eliminates internal turbulence and removes flow restrictions, allowing these jets to flow up to 35% more than competing designs of the same diameter. This increased flow capacity ensures your engine receives the most stable and unrestricted nitrous delivery possible.

• Jet Size: .016 R/T
• Manufacturing: CNC machined for precision
• Tolerance: Guaranteed within .0005 inches
• Design Features: Contoured inlet and multi-stepped outlet for turbulence-free flow
• Manufacturer Part Number: 17016

The Nitrous Express Maximizer Solo (16012) is a compact, gauge-mountable progressive nitrous controller designed for precise delivery management. Built to fit standard 2-1/16 inch gauge pods, this unit enables racers to fine-tune nitrous flow through a programmable 5-point time-based ramp. This customization allows for smooth power engagement that matches track conditions and available traction. Integrated safety features including RPM and Throttle Position Sensor (TPS) cutoffs protect the engine by ensuring nitrous only flows when specific operating parameters are met.

• Compact 2-1/16 inch design for easy interior gauge pod mounting
• Programmable 5-point time-based nitrous ramp for precise flow control
• Optional activation delay for customized power delivery off the line
• Integrated RPM and TPS cutoffs for enhanced engine safety
• Comprehensive kit includes controller module, wiring harness, and solenoid
• Manufacturer Part Number: 16012

The Nitrous Express 15158-6 Remote Shutoff Nitrous Valve offers a critical layer of safety and convenience for high-performance nitrous systems. This component allows the driver to open or close the main nitrous supply from within the cabin, eliminating the need to manually access the bottle valve before a pass or in an emergency situation.

Engineered for maximum flow, this valve features a large 0.500-inch internal orifice and a direct-flow design. This architecture ensures that the valve does not become a restriction in your nitrous line, maintaining consistent bottle pressure and delivery to the solenoid. Each unit is produced and assembled in the USA, following strict testing protocols to ensure reliability under high-pressure conditions.

• 6AN male inlet and outlet for seamless integration with standard nitrous supply lines
• Large 0.500" internal orifice supports high-horsepower applications
• Direct-flow design minimizes turbulence and pressure drop
• Enables remote bottle activation for improved safety and staging efficiency
• Assembled in the USA to Nitrous Express quality standards
• Manufacturer Part Number: 15158-6

The Nitrous Express 11703 Bottle Nut is a precision-engineered hardware component designed to securely attach a 4AN or 6AN nipple to Nitrous Express 326 series bottle valves. This nut provides the necessary clamping force to ensure a leak-free seal between the delivery nipple and the valve body, maintaining system pressure integrity.

• Secures 4AN or 6AN nipples to the bottle valve
• Compatible with Nitrous Express 326 NX brass and chrome-plated valves
• High-strength construction for reliable high-pressure sealing
• Manufacturer Part Number: 11703

Ensure a secure, leak-free connection for your nitrous system with the Nitrous Express 11701 4AN Bottle Nipple. Engineered specifically for use with NX chrome bottle valves (326 NX Valve), this fitting provides the critical interface between the bottle valve and your 4AN main feed line.

Precision-machined for durability and exact fitment, this nipple is a direct replacement or upgrade component for standard NX bottle configurations. Please note that the mounting nut required for installation is not included and must be purchased separately.

• Brand: Nitrous Express
• Part Number: 11701
• Fitting Size: 4AN
• Application: Fits NX 326 Chrome Bottle Valves
• Required Hardware: Nut sold separately (Part # 11703)

Maintain peak boost control and reliable performance with the Turbosmart Gen V WG60 Spring Replacement Kit. Designed specifically for the 60mm Power-Gate60 external wastegate, these genuine Turbosmart components allow you to service your wastegate or reconfigure its base boost pressure to suit your engine's requirements.

Whether you are performing a routine rebuild or adjusting your boost curve, using genuine replacement springs ensures the precise tolerances and spring rates required for stable manifold pressure. These are the same high-grade components used in the original hand-assembly of Gen V wastegates, ensuring direct compatibility and longevity under high thermal stress.

• Fits Turbosmart Gen V WG60 (Power-Gate60) External Wastegates
• Enables base boost pressure adjustment and maintenance
• Genuine Turbosmart factory-spec hardware for guaranteed fitment
• Manufacturer Part Number: TS-0550-3152

The Torque Solution Billet Adapter Flange (TS-HKS-TIAL) provides a precise, bolt-on solution for enthusiasts looking to switch between blow-off valve platforms. This adapter allows you to mount a TiAL style blow-off valve directly onto intercooler piping already equipped with an HKS-style mounting flange.

• CNC machined from high-grade billet aluminum for strength and durability
• Allows for a TiAL BOV to be used on HKS-style flanged piping
• Eliminates the need for cutting or welding new flanges to your intercooler pipes
• Designed to maintain a leak-free seal under high boost conditions
• Manufacturer Part Number: TS-HKS-TIAL

Fits 2016+ Ford F-150 models equipped with the 2.7L or 3.5L EcoBoost engines.

The Torque Solution Blow Off Valve Adapter (TS-FRD-483.2) allows your EcoBoost F-150 to achieve the classic atmospheric vent-to-atmosphere (VTA) sound. This CNC-machined spacer installs directly between the factory electronic blow-off valve (eBOV) and the mounting flange on the intercooler. By venting the pressurized air to the atmosphere instead of recirculating it into the intake tract, it provides a crisp "whoosh" sound upon throttle lift-off without the need for a complex aftermarket valve replacement.

• Precision CNC-machined 6061-T6 billet aluminum
• Corrosion-resistant black anodized finish
• Simple bolt-on installation using factory mounting points
• Maintains factory ECU control over the eBOV
• Manufacturer Part Number: TS-FRD-483.2

Fits 2010-2012 Hyundai Genesis Coupe (2.0L / 2.0T).

Designed as a direct-fit performance upgrade, the Mishimoto Aluminum Intercooler and Piping Kit addresses the cooling limitations of the factory setup. This kit is engineered to significantly reduce intake air temperatures and improve overall thermal efficiency, supporting the higher boost levels of modified turbocharged engines. Unlike many aftermarket intercooler kits, this system is a true bolt-on solution that retains the OEM front bumper and crash bar for a simplified installation process.

The core of this system is the silver bar-and-plate Z Line intercooler, featuring smooth cast end tanks to optimize internal airflow. The included lightweight, mandrel-bent aluminum charge pipes eliminate the restrictive bends found in factory plastic piping, ensuring a more direct path for pressurized air. This kit is fully compatible with both the factory radiator and the Mishimoto performance aluminum radiator.

• Direct bolt-on fitment for 2010-2012 2.0T models
• Retains factory crash bar and front bumper mounting
• Mandrel-bent aluminum piping for unrestricted flow
• Cast end tanks provide superior airflow characteristics
• Kit includes Z Line intercooler, aluminum piping, T-bolt clamps, and silicone couplers
• Manufacturer Part Number: MMINT-GEN4-10SL

Fits the 2014-2016 Ford Fiesta ST (1.6L EcoBoost).

The Mishimoto intercooler pipe kit replaces the restrictive, small-diameter factory piping in your 1.6L EcoBoost with high-flow, 2.5-inch mandrel-bent aluminum tubing. By eliminating the tight bends and bottlenecks found in the OE system, this kit reduces airflow resistance, supporting higher power levels as you increase boost on your hot hatch. The hot-side and cold-side pipes are designed for a direct-fit installation, requiring no modifications to the engine bay, and are compatible with both the stock intercooler and the Mishimoto performance intercooler.

This kit is engineered for versatility and reliability. The cold-side pipe features a CNC-machined sensor flange for the factory pressure sensor, along with a 1/8-inch NPT port for water-methanol injection or a boost gauge. For those looking to clean up the engine bay, it includes a silicone hose and CNC-machined plug to delete the factory sound symposer. Every kit is finished in a durable wrinkle black powder coat and comes with heavy-duty silicone couplers and stainless steel T-bolt clamps to prevent boost leaks under high-pressure conditions.

• Direct fit for 2014-2016 Ford Fiesta ST 1.6L
• 2.5-inch mandrel-bent aluminum piping for optimized airflow
• Includes CNC-machined MAP sensor flange and 1/8-inch NPT port
• Integrated sound symposer delete system
• Includes stainless steel T-bolt clamps and silicone couplers
• Power gains of up to 7 whp and 8 whp recorded over stock piping
• Estimated installation time: Under 1 hour
• Manufacturer Part Number: MMICP-FIST-14WBK
• Mishimoto Lifetime Warranty

The Mishimoto MMHP-TB-T25T28 Titanium Turbo Blanket is an essential thermal management solution for T25 and T28 frame turbochargers. By insulating the turbine housing, this blanket effectively contains the massive amount of heat generated during operation, protecting sensitive engine bay components from heat soak and potential failure. Maintaining higher exhaust gas temperatures inside the housing also helps sustain exhaust velocity, which can improve turbocharger spool-up and response.

• Specifically designed to fit T25 and T28 turbocharger housings
• Constructed with a durable volcanic lava rock outer layer
• High-grade 96% silica fiber inner lining for maximum thermal insulation
• Interior rated to a maximum temperature of 2300°F
• Capable of withstanding up to 1800°F of direct exterior heat
• Radiant heat resistance rated up to 2000°F
• Reduces under-hood temperatures to protect electronics, hoses, and paint
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMHP-TB-T25T28

Fits 2008-2017 Mitsubishi Lancer (DE, ES, GTS, Ralliart) and Lancer Evolution X (GSR, MR, SE, Final Edition) models.

The AMS Performance Upper Intercooler Pipe (UICP) is a high-flow, direct replacement for the restrictive factory piping. Constructed from 2.5-inch mandrel-bent aluminum, this pipe features a smooth 2-inch to 2.5-inch transition designed to minimize turbulence and optimize charge air delivery to the engine. To ensure reliability under high-boost conditions, the pipe ends are bead-rolled and the assembly utilizes factory mounting points on the core support to prevent coupler separation.

This kit replaces all factory rubber couplers with heavy-duty 4-ply silicone components capable of enduring over 50 psi of boost. A dedicated silicone hump hose is included to accommodate engine movement and prevent stress-related tearing. Each unit is TIG-welded by hand and finished in a high-luster polished aluminum for a professional engine bay appearance.

• 2.5-inch mandrel-bent lightweight aluminum tubing
• Smooth 2-inch to 2.5-inch transition for maximum airflow
• Includes 4-ply silicone couplers and a silicone hump hose
• Rated for 50+ psi of boost pressure
• Bead-rolled pipe ends to prevent coupler blow-off
• Hand TIG-welded construction with a polished finish
• Manufacturer Part Number: AMS.04.09.0002-1

Fits 2004-2007 Ford F-250 and F-350 Super Duty (6.0L).

The Fleece Performance Cheetah Turbocharger is a high-performance, drop-in replacement designed to provide the spool-up of a small turbo with the top-end power of a much larger unit. Built with genuine Garrett components and updated internals, this 100% stock-appearing turbocharger supports up to 650 RWHP and safely handles 40 PSI of boost without requiring aftermarket modifications or custom plumbing.

At the heart of the Cheetah is a 63mm Forged Milled Wheel (FMW), which is stronger and lighter than traditional cast or billet wheels, resulting in faster throttle response and a broader torque curve. Combined with a 66mm Cheetah turbine wheel and Variable Nozzle Technology (VNT), this turbo offers seamless power delivery whether you are towing during the week or sled pulling on the weekend. The assembly features upgraded shaft bearings and a 360-degree thrust bearing for superior longevity under high-load conditions.

• 63mm FMW compressor wheel and 66mm high-flow turbine wheel
• No core charge required
• Rated for up to 650 RWHP and 40 PSI of boost
• 360-degree thrust bearings and upgraded shaft bearings
• 2.5" Work Stock legal competition compliance
• Retains all factory mounting points and systems
• Manufacturer Part Number: FPE-6.0STREET-0407

Fits 2017-2023 Ford F-150 and F-150 Raptor models equipped with the 2.7L or 3.5L EcoBoost engines.

Heat soak is a primary performance bottleneck for turbocharged EcoBoost engines, especially during towing or spirited driving. The Cobb Front Mount Intercooler (FMIC) is engineered to maintain lower intake air temperatures by providing a significant increase in core volume and surface area compared to the factory unit. This silver-finish upgrade allows your F-150 to sustain peak power levels longer while protecting engine components from the stresses of high-heat cycles.

• Direct-fit replacement for the original equipment intercooler
• High-efficiency bar-and-plate core design
• Cast aluminum end tanks for optimal airflow and pressure durability
• Silver powder-coated finish for corrosion resistance
• Maintains compatibility with factory adaptive cruise control and active grille shutters (trimming may be required on some models)

• Manufacturer Part Number: 7F2500-SL
• Compatibility: 2017-2023 Ford F-150 & Raptor
• Engine Fitment: 3.5L / 2.7L EcoBoost
• Color: Silver

Fits 2017-2023 Ford F-150 and Raptor (3.5L / 2.7L).

Combat heat soak and maintain consistent power delivery with the Cobb Tuning Front Mount Intercooler (7F2500-BK). In turbocharged EcoBoost applications, intake air temperatures (IATs) can rise rapidly during heavy towing or spirited driving, causing the ECU to pull timing and reduce output. This upgraded intercooler features a high-efficiency core designed to dissipate heat more effectively than the factory unit, ensuring your engine receives cooler, denser air.

Finished in a durable black coating for a stealth appearance behind the front grille, this unit is engineered for a straightforward installation. By increasing the available cooling surface area, it provides the thermal headroom necessary for sustained performance without the common heat-related power loss found in stock F-150 cooling systems.

• Manufacturer Part Number: 7F2500-BK
• Finish: Black
• High-efficiency core design for improved heat dissipation
• Direct fitment for select 2017-2023 F-150 models
• Compatible with both 3.5L and 2.7L EcoBoost engines

Fits the Ford Fiesta ST Mk7.

The Turbosmart Kompact EM Series VR22 Plumb Back (TS-0223-1278) is a world-first, plug-and-play blow-off valve upgrade designed to replace the factory electronic diverter valve. While the OE unit is often prone to leaking or failure under increased boost, the VR22 is engineered from billet aluminum to provide rapid response and complete pressure reliability.

This electro-mechanical valve integrates directly with your vehicle's factory electronics, requiring no additional vacuum hoses or boost taps. The Plumb Back configuration ensures quiet operation by recirculating all vented air back into the intake system, maintaining factory-like acoustics with professional-grade performance.

• Direct replacement for the factory electronic diverter valve
• Pressure-stable billet aluminum construction with high-temperature O-rings
• Plug-and-play installation—no modifications required
• Maintains full OEM computer control for rapid valve response
• Plumb Back design for quiet, recirculating operation
• Manufacturer Part Number: TS-0223-1278

Fits 2015-2021 Subaru WRX.

The PERRIN Front Mount Intercooler (FMIC) Boost Tube Kit provides the high-flow plumbing necessary to connect your turbocharger to a front-mounted intercooler core. By replacing the factory charge pipes with this specialty kit, you ensure a direct and efficient path for pressurized air to reach the intake, optimizing the performance of your 2015-2021 WRX.

This kit is finished in a signature Neon Yellow powder coat, offering both long-term durability against engine bay heat and a distinct aesthetic for custom builds.

• Specifically designed for 2015-2021 Subaru WRX front mount intercooler configurations
• Durable Neon Yellow powder-coated finish
• Optimized plumbing for efficient boost delivery
• Includes essential tubes for FMIC installation
• Manufacturer Part Number: PSP-ITR-437-3NY

Maintaining consistent nitrous bottle pressure is critical for predictable engine performance and repeatable track times. The Nitrous Express 2-1/16in N2O Pressure Gauge & Controller (MPN 15531G) provides real-time monitoring and automated bottle heater management directly from the driver's seat.

This integrated controller allows you to set a specific target nitrous pressure. Once configured, it automatically cycles your NX bottle heater on and off to maintain that set point, eliminating the guesswork of manual switches. To ensure system longevity, the gauge features a 5-psi buffer zone below the target pressure, which prevents rapid relay flickering and protects your heater components from premature wear.

• Manufacturer Part Number: 15531G
• Gauge Size: 2-1/16 inch (52mm) for standard pod mounting
• Control Logic: Automated heater activation based on user-defined pressure targets
• Relay Protection: Integrated 5-psi buffer zone to prevent rapid heater cycling
• Visibility: Digital display for accurate at-a-glance pressure readings

Fits 1989-1998 Nissan 240SX (Base, LE, SE, XE) and Silvia S14/S15 chassis.

The GReddy 24 LS (Low-cost Sport) Intercooler Kit is engineered to provide a cost-effective cooling solution for turbocharged Nissan 240SX applications without compromising on thermal efficiency. This front-mount kit features a high-performance tube-and-fin core designed to balance rapid heat dissipation with minimal pressure drop, ensuring your engine receives a consistent supply of dense, cool intake air.

Built as a complete upgrade, this kit replaces restrictive factory charge piping with mandrel-bent aluminum tubing, improving throttle response and flow capacity. It is an essential component for drivers increasing boost levels or looking to maintain stable performance during spirited driving and track conditions. The kit includes all necessary hardware and couplers for a secure installation.

• Manufacturer Part Number: 12020480
• Core Series: 24 LS
• Construction: Tube-and-fin core with aluminum end tanks
• Includes: Intercooler core, aluminum piping, silicone couplers, and mounting brackets
• Direct fitment for S13 and S14 chassis 240SX models (1989-1998)

Fits 1997-2005 Toyota Aristo (JZS161) models equipped with the 2JZ-GTE engine.

The GReddy Intercooler Kit (MPN 12010464) is engineered to maximize the cooling efficiency of your turbocharged 2JZ-GTE. By replacing the restrictive factory setup with a high-flow core and mandrel-bent piping, this kit significantly reduces intake air temperatures (IATs) and minimizes pressure drop across the system. This results in denser, oxygen-rich air reaching the combustion chamber for improved throttle response and more consistent power delivery during high-performance driving.

• High-capacity intercooler core designed for optimal heat dissipation and airflow.
• Mandrel-bent aluminum piping to eliminate flow restrictions found in OE rubber hoses.
• Durable multi-layer silicone couplers and heavy-duty clamps for secure, leak-free connections under boost.
• Direct-fit design engineered to work with the JZS161 chassis.
• Manufacturer Part Number: 12010464

The CSF 8047 High Performance Bar & Plate Intercooler Core is engineered for custom high-boost applications requiring superior thermal management. Rated for 850 WHP, this 22" x 12" x 3.5" horizontal-flow core provides a robust foundation for custom intercooler fabrication. Each core is hand-built in a clean-room environment using precise jigs and fixtures to ensure a perfectly square assembly, providing a clean surface for easy end-tank welding.

Constructed using a heavy-duty bar and plate design, the CSF 8047 features a multi-louvered, high-precision staggered fin arrangement on both the ambient and pressure sides to maximize heat transfer. To ensure reliability under extreme boost, every core is batch-brazed in a state-of-the-art digital vacuum oven and individually pressure tested to 120 psi.

• Manufacturer Part Number: 8047
• Construction: Heavy-Duty Bar & Plate
• Flow Configuration: Cross-flow / Horizontal
• Dimensions: 22" L x 12" H x 3.5" W (560mm x 300mm x 90mm)
• Horsepower Rating: Up to 850 WHP
• Pressure Tested: 120 psi
• Precision multi-louvered staggered fin design for optimized cooling efficiency
• Batch-brazed in digital vacuum ovens for maximum structural integrity

Fits 1999-2003 Ford F-250/F-350 Super Duty and Ford Excursion models (7.3L Turbo Diesel).

The CSF 7107 Heavy Duty Intercooler is engineered to replace the failure-prone factory unit in 7.3L Powerstroke-equipped F-Series and Excursion trucks. Built with rugged bar and plate construction and all-aluminum cast end tanks, this charge-air-cooler is designed to handle the extreme pressures and heat cycles of towing and heavy-duty performance. Each unit is pressure tested to 120 psi to ensure maximum reliability in high-boost applications.

To further enhance cooling efficiency, CSF applies a proprietary Thermal Rejection Powder-Coating. This finish provides a sleek OEM+ appearance while offering up to a 15% improvement in heat dissipation compared to non-coated intercoolers. Designed as a true "drop-in fit" upgrade, the CSF 7107 utilizes precise OEM-style inlet and outlet connections for a secure installation without the need for vehicle modifications.

• Heavy-duty bar and plate core construction
• All-aluminum cast end tanks for superior strength
• High-density internal and external fin design for maximum surface area
• Thermal rejection powder coating for 15% better heat dissipation
• Pressure tested at 120 psi for extreme boost reliability
• Precise "Quick-Connect" inlet/outlet connections
• Manufacturer Part Number: 7107

This genuine BorgWarner K03 Turbocharger Repair Kit (MPN 53037110000) is designed to restore original equipment performance and reliability to your turbocharger unit. As a direct replacement service kit, it provides the critical internal components necessary to refresh worn bearings and seals, addressing common oil consumption and shaft play issues.

• Genuine BorgWarner components for exact fitment and OE tolerances
• Designed specifically for K03 series turbocharger maintenance
• Includes high-precision bearings and sealing rings to ensure long-term durability
• Manufacturer Part Number: 53037110000

Professional installation is recommended for balancing and proper assembly of the turbocharger center housing rotating assembly (CHRA).

Fits 2008-2014 Subaru WRX.

The PERRIN Front Mount Intercooler Boost Tube Kit is designed to maintain consistent boost pressure and ensure a secure connection between your intercooler and throttle body. This kit replaces damaged or aging piping within your front mount intercooler system, providing a reliable path for charged air under high-pressure conditions.

• Specifically designed for 2008-2014 WRX front mount intercooler configurations
• High-visibility red finish for a custom engine bay aesthetic and corrosion resistance
• Engineered to withstand increased boost levels without expansion or leaking
• Manufacturer Part Number: PSP-ITR-436-3RD

Fits select 2002-2026 Subaru WRX and STI models.

The PERRIN Standard Size Front Mount Intercooler Core is a high-efficiency heat exchanger designed to maintain low intake air temperatures on turbocharged EJ and FA engines. This silver-finished core is a critical component for owners building custom front-mount intercooler (FMIC) setups or replacing a damaged unit. It provides the surface area necessary to dissipate heat effectively, preventing heat soak and ensuring consistent power delivery under high-boost conditions.

• Manufacturer Part Number: PSP-ITR-400SL
• Component: Front Mount Intercooler Core
• Finish: Silver
• Size: Standard
• Compatibility: 2002-2026 Subaru WRX and STI models