Fits 2016-2023 Nissan Titan XD (Platinum Reserve, PRO-4X, S, SL, SV).

Secure your rear suspension with the ICON 9-inch U-Bolt Kit, specifically engineered for the Nissan Titan XD. These U-bolts feature a square profile and are manufactured from high-strength steel to maintain proper clamping force on your leaf spring pack. To ensure long-term durability in harsh underbody environments, each bolt is finished with a protective zinc plating for superior corrosion resistance.

Designed for versatility, these 9-inch bolts accommodate both factory suspension setups and aftermarket leaf spring packs. This kit includes all necessary hardware for a complete single-axle installation, replacing worn or stretched factory hardware during a lift kit install or suspension service.

• Square design for precise axle housing fitment
• High-strength steel construction
• Zinc-plated finish for corrosion resistance
• Length: 9 inches
• Includes nuts and washers
• Complete kit for one axle
• Manufacturer Part Number: 88700

Fits select 2011-2025 Ford F-250 and F-350 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT).

The ICON Vehicle Dynamics 12-inch U-bolt kit is engineered to provide a secure, high-strength connection between your rear leaf springs and the axle housing. Specifically designed for 2011-2025 Ford Super Duty applications, these U-bolts accommodate various aftermarket leaf spring and rear lift block configurations that require extended length over factory hardware.

Constructed from high-tensile Grade 8 steel, this kit (MPN: 67004) ensures maximum clamping force and durability under heavy payload or off-road conditions. Each U-bolt features a black E-coat finish for superior corrosion resistance against road salts and environmental debris. The kit includes all necessary Grade 8 nuts and hardened washers to ensure a complete and reliable installation.

• High-strength Grade 8 steel construction for maximum durability
• 12-inch length compatible with various lift blocks and leaf spring packs
• Durable black E-coat finish for excellent corrosion protection
• Complete kit includes U-bolts, heavy-duty nuts, and washers
• Precision fit for Ford F-250 and F-350 rear axle housings
• Manufacturer Part Number: 67004

Vehicle Fitment

Fits 2011-2025 Ford F-250 and F-350 Super Duty trucks. This ICON Vehicle Dynamics rear U-bolt kit is designed to provide the necessary clamping force to keep your leaf springs securely mated to the rear axle tube, even under the stress of off-road use or heavy towing. These 15-inch U-bolts are specifically sized for use with various aftermarket leaf spring and rear lift block configurations.

Constructed from high-strength Grade 8 steel, these bolts are finished with a black E-coat for superior corrosion resistance against road salts and debris. The kit includes all necessary Grade 8 nuts and hardened washers to ensure a complete and reliable installation without the need for sourcing additional hardware.

• Fits 2011-2025 Ford F-250/F-350 Super Duty models
• Manufactured from high-strength Grade 8 steel hardware
• 15-inch length for compatibility with multiple spring and block setups
• Black E-coat finish for long-lasting corrosion protection
• Includes all necessary mounting nuts and washers
• Manufacturer Part Number: 67003

Fits 2011-2025 Ford F-250 and F-350 Super Duty.

Ensure your rear leaf springs remain securely fastened to the axle with the ICON Vehicle Dynamics 17-inch U-bolt kit. These high-strength fasteners are essential when installing aftermarket leaf packs or rear lift blocks. Manufactured from Grade 8 steel, these bolts provide the heavy-duty clamping force required for Super Duty applications.

Each bolt is finished with a black E-coat for superior corrosion resistance against road salts and environmental debris. At 17 inches in length, this hardware provides the necessary clearance for various suspension configurations. The kit includes all required Grade 8 nuts and washers to complete the installation on both sides of the rear axle.

• Length: 17 inches
• Material: High-strength Grade 8 steel
• Finish: Black E-coat for corrosion resistance
• Includes: U-bolts, nuts, and washers
• Engineered for Ford F-250/F-350 Super Duty leaf spring and block setups
• Manufacturer Part Number: 67002

Fits 2011-2025 Ford F-250 and F-350 Super Duty models.

The ICON Vehicle Dynamics 19-inch U-bolt kit provides the high-strength clamping force required to securely anchor your rear leaf springs to the axle housing. These Grade 8 fasteners are engineered for vehicles utilizing aftermarket leaf packs or rear lift blocks, ensuring the suspension remains properly seated under heavy loads. Each bolt features a black E-coat finish for superior resistance against corrosion and road debris.

• Manufactured from high-strength Grade 8 steel for maximum durability
• 19-inch length accommodates a variety of leaf spring and rear lift block combinations
• Black E-coat finish provides long-lasting protection against rust and corrosion
• Complete hardware kit includes U-bolts, mounting nuts, and hardened washers
• Direct replacement for worn or insufficiently sized OE hardware
• Manufacturer Part Number: 67001

Fits 2011-2025 Ford F-250 and F-350 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT).

The ICON Vehicle Dynamics 65501 U-Bolt Plate Kit is a heavy-duty solution for securing aftermarket rear leaf springs to the axle. These plates are specifically designed to facilitate the installation of ICON 5-inch lift rear leaf springs, providing a robust mounting surface that replaces the factory OE U-bolt plates. Engineered for durability, these plates ensure proper alignment and clamping force for your truck's rear suspension system.

Each plate is fabricated from CNC laser-cut steel for precision fitment and maximum strength. To protect against the elements and road debris, ICON applies a dual-stage, semi-gloss black powder coat finish that offers superior corrosion resistance compared to standard finishes.

• Fits 2011-2025 Ford F-250/F-350 Super Duty models
• Required for installation of ICON 5-inch lift rear leaf springs
• CNC laser-cut steel construction for high-strength durability
• Dual-stage semi-gloss black powder coat finish for corrosion protection
• Compatible with ICON and other heavy-duty aftermarket U-bolts
• Manufacturer Part Number: 65501
• Limited Lifetime Warranty

Fits select 1995-2007 Toyota 4Runner, Sequoia, Tacoma, and Tundra.

The ICON Delta Joint Retrofit Hardware Kit (MPN 614526) allows owners of first-generation Toyota trucks and SUVs to upgrade their existing uniball upper control arms to the long-lasting ICON Delta Joint. This kit adapts the factory spindle to accept the ball joint taper used on 2005-2023 Tacoma models, enabling a seamless retrofit into ICON or many non-ICON upper control arms originally designed for 1-inch uniball bearings.

Each kit features a zinc-plated finish for enhanced corrosion resistance in harsh environments. The included hardware is designed for a straightforward installation that eliminates the need for a hydraulic press, making it a practical solution for both professional installers and DIY enthusiasts looking to improve suspension durability and articulation.

• Adapts factory spindle to accept 2005-2023 Tacoma ball joint taper
• Allows Delta Joint retrofit into existing uniball upper control arms
• Zinc plating provides excellent corrosion resistance
• Includes all necessary installation hardware
• Press-free installation design
• Manufacturer Part Number: 614526

Fits select 2021-2023 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, and Wildtrak.

The ICON Vehicle Dynamics Hose Routing Kit (611073) provides a professional solution for securing remote reservoir hoses on your off-road build. Specifically designed for ICON 2.5 Series rear remote reservoir coilovers, these clamps allow you to route hoses cleanly along the top of 1.75-inch diameter rear lower links. This positioning keeps the hoses protected from trail obstacles and debris while eliminating the need for unsightly zip ties or generic worm-gear clamps.

Each clamp is CNC machined from 6061 aircraft-grade aluminum to ensure a precise fit and long-term durability. The components are finished in a black anodized coating that matches ICON shock absorbers and provides superior corrosion resistance against the elements.

• Compatible with ICON tubular rear lower links or aftermarket links with a 1.75-inch outer diameter
• Specifically engineered for ICON 2.5 Series rear coilover remote reservoir hoses
• CNC machined 6061 aircraft-grade aluminum construction
• Corrosion-resistant black anodized finish
• Includes all necessary mounting hardware
• Manufacturer Part Number: 611073

Fits select 1995-2023 Toyota Tacoma, 2000-2021 Tundra, and 2019-2023 Chevrolet Silverado/GMC Sierra 1500 models.

This ICON Vehicle Dynamics U-bolt kit is engineered for high-strength axle mounting on trucks with stock or aftermarket leaf spring packs. These U-bolts feature a square-bend design and are manufactured from high-strength steel to ensure a secure clamping force that withstands the rigors of off-road use and heavy loading. Each bolt is finished with a durable black E-coating for long-lasting corrosion resistance in harsh environments.

• Part Number: 52100
• Design: Square-bend U-bolts
• Length: 9.5 inches
• Material: High-strength steel construction
• Finish: Black E-coat for maximum corrosion resistance
• Configuration: Complete kit for one axle
• Compatibility: Works with factory leaf springs or aftermarket multi-leaf packs
• Included Hardware: High-strength nuts and washers

Fits select 1995-2023 Toyota Tacoma/Tundra and 2019-2023 Chevrolet Silverado/GMC Sierra 1500 trucks. These ICON Vehicle Dynamics U-bolts are designed to provide a secure mounting solution for rear suspension setups, whether you are running factory components or aftermarket leaf spring packs.

Constructed from high-strength steel, these 8-inch U-bolts feature a square design to properly seat against the axle and leaf pack. To ensure long-term durability in harsh underbody environments, each bolt is finished with an E-coating for superior corrosion resistance. This kit (Part Number 52050) provides the necessary hardware for a single axle installation.

• Replaces or upgrades rear leaf spring U-bolts
• 8-inch length accommodates various leaf pack thicknesses
• Square profile for precise fitment
• High-strength steel construction with corrosion-resistant E-coating
• Includes nuts and washers for a complete installation
• Manufacturer Part Number: 52050

Fits select 1999-2010 Ford F-250 Super Duty, F-350 Super Duty, and Excursion models.

The ICON Rear 17in U-Bolt Kit (37002) provides the essential clamping force required to secure the rear axle to the leaf spring assembly. These high-strength steel U-bolts are a critical component for maintaining suspension geometry and safety, especially when factory hardware has been compromised by rust, stretching, or during the installation of aftermarket lift components that require longer fasteners.

• Manufacturer Part Number: 37002
• Length: 17 inches
• Position: Rear Axle
• Material: High-tensile strength steel
• Includes necessary nuts and washers for a complete installation
• Designed to replace factory hardware for improved torque retention

Fits select 2011-2019 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks. This vehicle-specific mounting hardware kit is a mandatory requirement for installing Hellwig Load Pro (LP) series helper springs.

The Hellwig 25312 kit provides the necessary heavy-duty brackets and hardware to secure LP-25 (2,500lb) or LP-35 (3,500lb) multi-leaf helper springs to your truck's factory leaf pack. Engineered for a precision fit, these components ensure the helper springs align correctly with the OE suspension, requiring no permanent vehicle modifications for a clean, bolt-on installation.

• Required for complete installation of Hellwig LP-25 and LP-35 helper spring kits
• Vehicle-specific brackets ensure proper spring alignment and load distribution
• Zinc-plated finish for superior corrosion resistance and durability
• Direct bolt-on design with no drilling or modification needed
• Includes all necessary mounting brackets and hardware
• Limited Lifetime Warranty
• Manufacturer Part Number: 25312

Fits 2011-2026 Ford F-250 and F-350 Super Duty (King Ranch, Lariat, Limited, Platinum, XL, XLT).

The Hellwig 25301 Mounting Hardware Kit is a vehicle-specific installation solution required for all Hellwig Load Pro (LP) helper spring applications. This kit must be purchased to install either the LP-25 (2500lb) or LP-35 (3500lb) multi-leaf helper spring kits. It is engineered to allow the spring kits to mount securely to the factory leaf pack with no vehicle modification required.

Manufactured with high-strength, zinc-plated hardware and heavy-duty brackets, this kit is designed to withstand the rigors of heavy hauling and towing. By using vehicle-specific mounting points, it ensures proper alignment and tension for the helper springs, maintaining vehicle stability under load.

• Required for complete installation of Hellwig LP-25 and LP-35 helper spring kits
• Vehicle-specific brackets ensure a precise, no-drill fitment
• Corrosion-resistant zinc-plated components for long-term durability
• Includes all necessary fasteners and mounting hardware
• Manufacturer Part Number: 25301
• Limited Lifetime Warranty

Fits select 1967-2014 Dodge B-Series, Ram 1500-3500, and Ford Bronco, E-Series, and F-Series vehicles (5.9L).

The Hellwig 25300 Mounting Hardware Kit is a required component for the installation of Hellwig Load Pro (LP) series helper springs. Specifically engineered for the LP-25 (2500lb) and LP-35 (3500lb) multi-leaf kits, this hardware ensures a secure, vehicle-specific fit that maintains the integrity of your suspension system without the need for custom fabrication or modification.

Constructed with durability in mind, the kit features heavy-duty brackets and high-quality zinc-plated hardware to resist corrosion and handle the stresses of heavy hauling and towing. This kit provides the necessary mechanical interface between the helper spring pack and the factory leaf spring assembly, allowing for a straightforward bolt-on installation.

• Required for every LP-25 and LP-35 leaf helper spring installation
• Vehicle-specific design for a precise, no-modification fit
• Zinc-plated finish for superior corrosion resistance
• Includes all necessary brackets and mounting hardware
• Manufacturer Part Number: 25300
• Limited Lifetime Warranty

Fits select 1980-2002 Chevrolet, Ford, Dodge, and Cadillac trucks and vans (5.9L).

The Hellwig 25250 Mounting Hardware Kit is a mandatory component required for the installation of Hellwig Load Pro LP-25 and LP-35 multi-leaf helper springs. This vehicle-specific kit provides the necessary interface between your vehicle's factory suspension and the helper spring pack, enabling the system to provide up to 2,500 lbs or 3,500 lbs of additional load-leveling capacity.

Constructed from heavy-duty steel with a corrosion-resistant zinc-plated finish, these brackets and fasteners are designed to withstand heavy towing and hauling conditions. This kit eliminates the need for custom fabrication by utilizing precise mounting points for a secure, bolt-on installation.

• Required for all Hellwig LP-25 and LP-35 leaf helper spring installations
• Vehicle-specific brackets ensure a proper fit without modification
• Zinc-plated hardware for maximum durability and rust prevention
• Includes all necessary brackets and fasteners for a complete install
• Manufacturer Part Number: 25250
• Limited Lifetime Warranty

The Haltech HT-010808 is a specialized hardware component designed for 1/4-inch compression fitting assemblies. This set includes a single nut and a precision-machined brass ferrule, providing the necessary components to create a reliable, leak-free seal on hard lines or sensor probes.

Commonly used in vacuum, pressure, and fluid management systems, the brass ferrule is designed to deform slightly upon tightening to grip the line securely without compromising the tubing's integrity. This makes it an essential replacement or spare part for automotive sensor installations and ECU-related plumbing where precision and reliability are required.

• Manufacturer Part Number: HT-010808
• Tube Diameter: 1/4 inch
• Material: Brass ferrule for superior sealing performance
• Application: Compression fitting systems for sensors and hard lines
• Included Hardware: (1) Nut, (1) Brass Ferrule

The Haltech NTK Wideband Hardware Pack (HT-010747) provides the essential components for high-accuracy air/fuel ratio monitoring in performance tuning applications. Genuine NTK sensors are widely preferred by professional tuners for their superior durability and resistance to leaded fuels and extreme exhaust temperatures compared to standard wideband options.

This hardware pack includes a genuine NTK wideband sensor, an adapter harness for seamless integration with your Haltech engine management system, and a weld-in bung to ensure a secure and leak-free installation in your exhaust system.

• High-Accuracy Sensor: Genuine NTK wideband oxygen sensor for precise AFR data.
• Integrated Adapter: High-quality adapter harness for clean electrical connectivity.
• Weld-In Bung: Includes standard threaded bung for exhaust pipe mounting.
• Part Number: HT-010747

The Haltech LSU 4.9 Wideband Hardware Pack provides the essential components for accurate air-fuel ratio (AFR) monitoring and engine tuning. This kit is designed for use with Haltech wideband controllers and ECUs to ensure your fuel management system receives precise, high-speed data from the exhaust stream.

Featuring the industry-standard Bosch LSU 4.9 sensor, this hardware pack is preferred for its superior accuracy and longevity compared to older sensor designs. The included adaptor harness allows for a secure, plug-and-play connection to your wideband controller, while the weld-in bung provides a permanent mounting solution for your exhaust downpipe or header.

• Genuine Bosch LSU 4.9 Wideband Oxygen Sensor
• Weld-in O2 sensor bung for secure exhaust installation
• Adaptor harness for seamless integration
• Manufacturer Part Number: HT-010746

Fits Honda B-Series VTEC engines including B16A, B17A, and B18C equipped with aftermarket cam gears.

The GSC Power-Division Titanium Washer and Bolt Kit (MPN 4015) provides a high-strength, lightweight hardware solution for securing aftermarket cam gears. By utilizing titanium, this kit reduces rotational mass at the end of the camshafts while providing exceptional corrosion resistance and high tensile strength to maintain timing accuracy under high-RPM conditions.

These fasteners are specifically designed for the B-Series VTEC platform, replacing factory hardware with precision-machined titanium components that ensure a reliable clamp on the camshaft snout. This is an essential upgrade for built heads where performance and reliability are paramount.

• Material: High-grade Titanium (Ti) for weight reduction and strength
• Engine Compatibility: Honda B16A, B17A, B18C VTEC
• Requirement: Specifically for use with aftermarket cam gears
• Includes: High-strength titanium bolts and matching washers
• Manufacturer Part Number: 4015

Fits 2011-2017 Ford Mustang GT (5.0L).

Ensure precise valvetrain operation and reduce friction in your Coyote engine with the Ford Racing Roller Finger Follower Kit. These followers are engineered to handle the demands of high-performance DOHC 5.0L engines, providing a durable interface between the camshaft lobes and the valve stems. This kit replaces the factory components that can become worn or damaged over time, ensuring your valvetrain remains stable even under high-RPM conditions. This is a critical component for any engine rebuild or performance camshaft installation.

• Compatible with 2011-2017 5.0L Coyote DOHC engines
• Designed to reduce valvetrain friction and improve reliability
• Direct-fit replacement for factory roller finger followers
• Essential for high-lift camshaft upgrades and performance engine builds
• Manufacturer Part Number: M-6564-M50

Fits 2005-2010 Ford Mustang GT (4.6L) equipped with a manual transmission.

Secure your manual transmission flywheel with confidence using this set of high-strength Ford Racing flywheel bolts. Engineered as a direct stock replacement, these fasteners ensure a precise fit and reliable torque retention when mounting the flywheel to the crankshaft. Using new hardware is a critical step during any clutch replacement or engine rebuild to prevent fastener fatigue and maintain drivetrain integrity on your 4.6L Modular engine.

• Thread Pitch: M10 x 1.0
• Underhead Length: 26.5mm
• Quantity: Package of 8 bolts
• Construction: High-strength steel
• Origin: Made in the USA
• Manufacturer Part Number: M-6379-B

Fits 2005-2010 Ford Mustang GT models equipped with the 4.6L 3V SOHC engine.

When performing a camshaft upgrade or engine rebuild on your 3-valve modular engine, replacing the camshaft bolts is a mandatory step. These Ford Racing camshaft bolts are engineered as torque-to-yield (TTY) fasteners, designed to stretch during final tightening to provide consistent clamping force. Because the material permanently deforms once torqued to spec, these bolts are single-use components and cannot be safely reused after removal.

• Precision Manufacturing: High-grade steel construction ensures reliable timing gear retention under high RPM.
• Critical Installation Specs: Stage 1: Tighten to 40 Nm (30 lb-ft); Stage 2: Tighten an additional 90 degrees.
• Complete Hardware: Includes two (2) bolts to service both cylinder heads.
• Application: Required for all 4.6L 3V camshaft swaps or timing drive maintenance.
• Origin: Proudly made in the USA.
• Manufacturer Part Number: M-6279-463V

Fits 2011-2017 Ford F-150 and Mustang GT (5.0L).

Ensure your engine bay is properly finished with this Ford Performance cam cover ball stud kit. These studs are specifically designed to allow for the secure attachment of coil covers to the factory cam covers on 5.0L Coyote engines. Whether you are performing a restoration, replacing lost hardware, or adding aftermarket coil covers, these OEM-quality steel studs provide the precise fitment and durability required for high-heat engine environments.

Each kit includes six ball studs, providing a complete set to cover one engine. These components are manufactured to Ford's rigorous standards, ensuring they thread perfectly into factory mounting points without the risk of stripping or loosening over time.

• Allows for proper coil cover attachment to the cam covers
• Manufactured from OEM-quality steel for long-term durability
• Full kit of 6 ball studs (one set required per engine)
• Direct replacement for original hardware
• Manufacturer Part Number: M-6067B-F150

Organize your ignition system and protect your spark plug wires with this Ford Racing wire divider set. Designed to manage messy wire routing in high-performance engine bays, these dividers prevent cross-firing and keep wires securely positioned away from hot exhaust components. Each piece features a durable black finish accented by the classic white Ford logo for a professional under-hood appearance.

Fits select 1963-2001 Ford Bronco, Econoline, F-Series, Mustang, and passenger cars equipped with 289, 302, or 351W engines.

• Optimized Routing: Provides secure management for 4-wire, 3-wire, and 2-wire segments.
• Complete Set: Includes six dividers per package to accommodate a full V8 ignition layout.
• Classic Aesthetics: High-contrast black finish with the iconic white Ford logo.
• Engine Compatibility: Specifically designed for Ford small-block V8 engines (289, 302, 351W).
• Manufacturer Part Number: 302-641