Fits 1998-2003 Mercedes-Benz CLK320, CLK430, and CLK55 AMG Base models.

Bilstein B8 Performance Plus dampers are engineered as a performance upgrade for vehicles equipped with aftermarket lowering springs or factory sport suspensions. These dampers feature application-specific valve settings designed to accommodate the reduced travel and increased spring rates of lowering kits, providing superior handling dynamics without sacrificing ride quality.

• Monotube Design: Delivers consistent, fade-free performance and rapid heat dissipation for better control during spirited driving.
• Optimized for Lowering: Specifically tuned stroke lengths ensure the internal piston remains within its optimal operating range, preventing premature wear common when using OE shocks with shorter springs.
• 36mm Bore: Provides a large piston surface area for precise damping adjustments and improved structural rigidity.
• Vehicle-Specific Tuning: Rigorously tested for the Mercedes-Benz W208 chassis to ensure a sporty feel that maintains everyday comfort.
• Technical Specs: Monotube gas pressure construction; front installation position; manufacturer part number 24-025997.

Fits select 2003-2024 Toyota 4Runner, 2007-2014 FJ Cruiser, 2003-2009 Lexus GX470, and 2010-2023 GX460.

The Bilstein B8 5160 remote reservoir shock absorber is engineered as a direct-fit solution for lifted trucks and SUVs. By utilizing a remote reservoir, this unit provides significantly increased oil capacity and cooling for greater heat dissipation and extended wheel travel compared to standard monotube shocks. The 46mm monotube design ensures consistent, fade-free damping performance even when navigating technical off-road terrain.

Equipped with velocity-sensitive digressive valving, the B8 5160 reacts instantly to changing surface conditions to maintain maximum vehicle control. Installation is streamlined via a unique 360-degree swivel banjo hose fitting and a billet reservoir mount where applicable, allowing for a clean, low-profile fitment to factory mounting points.

• 46mm monotube construction for consistent, fade-free damping
• Remote reservoir increases oil capacity for superior heat dissipation
• Self-adjusting deflective disc valving for immediate response to surface changes
• Unique 360-degree swivel banjo hose fitting for flexible installation
• Specific digressive valve settings tuned for each application
• Zinc plated finish for resistance against harsh environments

Fits select 2013-2020 BMW 2 Series, 3 Series, and 4 Series xDrive models, including GT and Gran Coupe variants (V6-3.0L / L4-2.0L).

The Bilstein B4 Series twintube gas pressure strut is engineered to restore your vehicle's original driving comfort, handling precision, and safety. Designed as a direct-fit OE replacement, these struts utilize proven gas pressure technology to provide consistent damping performance and high power reserves. This assembly is specifically tuned to maintain the factory ride characteristics and safety profiles established by the manufacturer, making it the ideal choice for replacing worn or leaking factory dampers.

• Product Line: B4 Series
• Position: Front Left
• Internal Design: Twintube
• Technology: Gas Pressure
• Direct replacement for factory strut assembly
• Restores original equipment (OE) handling and comfort
• Maintains factory safety and stability standards

Fits 2021-2025 Ford F-150 models, including King Ranch, Lariat, Platinum, Tremor, XL, XLT, STX, SSV, and Police Responder. These ICON Vehicle Specific (V.S.) 2.5 Series aluminum shocks are engineered to provide superior damping control for both off-road performance and on-road comfort.

This shock set features ICON's Compression Damping Control (CDC) Valve technology, allowing for 10 distinct levels of high-resolution compression adjustment via an external knob. The piggyback reservoir design increases oil volume and surface area to improve heat dissipation, effectively reducing shock fade during aggressive use. For added bottom-out protection, ICON incorporates an internal “Bump Zone” within the 6061 billet aluminum manifold, providing an additional 20% of damping force as the shock reaches full compression.

• CDC Valve (CDCV) allows for 10 levels of user-adjustable compression damping
• 2.5-inch diameter one-piece hard-anodized, impact-extruded aluminum cylinders
• 7/8-inch induction-hardened, chrome-plated shock shafts
• Internal “Bump Zone” increases damping by 20% for bottom-out control
• One-piece digressive piston design for vehicle-specific valving
• Premium 5WT shock oil for consistent performance across temperature extremes
• PTFE-lined spherical bearings and 6061 CNC-machined aluminum components
• 100% rebuildable and revalveable design
• Manufacturer Part Number: 97721CP

Maintain the performance and longevity of your suspension with the Fabtech 2.25" Reservoir Shock Absorber Rebuild Kit. Engineered specifically for Fabtech 2.25-inch diameter shocks equipped with external reservoirs, this kit provides the essential internal components needed to refresh your dampers and restore factory-level sealing.

Exposure to heat, debris, and high-frequency cycling eventually degrades internal seals, which can lead to fluid leaks or nitrogen pressure loss. This service kit allows for a complete internal overhaul, ensuring your shocks maintain consistent damping characteristics during off-road use. Using high-grade materials for precise fitment, this kit is an essential part of a regular maintenance schedule for high-performance shocks.

• Fits Fabtech 2.25-inch diameter reservoir shock absorbers
• Includes all necessary replacement O-rings
• Includes high-grade replacement seals
• Designed to restore internal sealing and damping consistency
• Service-ready components for professional or DIY rebuilds

Fits 1988-2016 Chevrolet Blazer, K1500, and Tahoe; GMC K1500; Ford F-150; and Hummer H2. The Fabtech Stealth Series is a performance-oriented monotube shock absorber designed to provide a superior ride for trucks and SUVs equipped with oversized tires.

Constructed with a 50mm OD seamless steel body, the Stealth series utilizes a 46mm high-flow piston and vehicle-specific valving to maintain consistent damping control. The internal design features a full floating piston that separates the nitrogen gas charge from the oil, preventing aeration and shock fade during heavy use. For maximum durability, the 14mm piston rod is nitrocarburized rather than chromed, offering increased resistance to rock chips and corrosion.

• 46mm high-flow piston for consistent ride quality
• 14mm Nitrocarb piston rod resists rust and debris damage
• 50mm OD seamless steel body for increased oil capacity
• Full floating piston prevents oil foaming and fade
• All-black finish with raised metal nameplate
• Specifically tuned for vehicles with larger wheel and tire packages

Fits select 2007-2018 Jeep Wrangler and Wrangler JK models, including Rubicon, Sahara, Sport, and Unlimited trims.

Bilstein B8 5160 remote reservoir shock absorbers are engineered as a bolt-on solution for lifted trucks and SUVs that require consistent performance in demanding off-road environments. The remote reservoir design significantly increases shock oil capacity, providing superior heat dissipation and increased wheel travel compared to traditional monotube shocks. Featuring velocity-sensitive digressive valving, these shocks are specifically tuned for the Jeep Wrangler platform to react instantly to changing surface conditions.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Remote reservoir increases cooling capacity for greater heat dissipation
• Unique 360-degree swivel banjo hose fitting allows for a clean, low-profile installation
• Self-adjusting deflective disc valving for maximum vehicle control
• Includes a billet reservoir mount where applicable for a secure fit
• Direct-fit installation into factory mounting points

Fits select 2019-2023 Volvo XC40 and XC40 Recharge (T4, T5, and Electric models).

The Bilstein B6 Performance damper is a direct-fit performance upgrade for original equipment (OE) dampers, specifically engineered to be paired with your vehicle's factory coil springs. Designed for drivers who want improved handling without lowering their vehicle, these struts feature application-specific valve settings that enhance grip and lane stability in both daily driving and high-demand situations.

Each B6 Performance strut utilizes Bilstein's signature gas-pressure technology to provide consistent damping power under load. These units are rigorously tested to ensure they meet or exceed OE quality standards, delivering a significant improvement in safety and suspension control while maintaining a compliant ride.

• Orientation: Front Right
• Series: B6 Performance
• Technology: Bilstein gas-pressure construction
• Compatibility: Designed for use with factory springs
• Performance: Enhanced lane stability and optimum grip

Vehicle Fitment

Fits select 1973-1991 Buick, Cadillac, Chevrolet, Dodge, GMC, Oldsmobile, and Pontiac vehicles.

The Bilstein B6 series shock absorber (24-009492) is a performance upgrade for drivers who want improved vehicle handling and stability without sacrificing ride comfort or changing factory ride height. Featuring a large 46mm monotube piston, this front shock provides consistent, fade-free damping for daily driving and demanding conditions.

Built with Bilstein gas-pressure technology, this shock is specifically tuned for each application to ensure optimum grip and lane stability. It is designed to work seamlessly with original equipment springs, making it an ideal choice for restoring or enhancing your vehicle's front suspension performance.

• Manufacturer Part Number: 24-009492
• Product Series: B6
• Position: Front
• Internal Design: 46mm Monotube
• Improved safety and performance with OE springs
• Optimum grip and enhanced lane stability
• Vehicle-specific ride tuning
• Bilstein gas-pressure technology

Fits 1974-1978 Ford Mustang II including Base, Ghia, Mach 1, and 2+2 models.

The QA1 MS303 Pro Front Coil-Over Shock is engineered to provide precise control and improved ride quality for 1974-1978 Ford Mustang II applications. Featuring single-adjustable valving, this shock allows you to adjust compression and rebound simultaneously, making it an ideal solution for street performance and occasional drag strip use. The lightweight billet aluminum body is threaded for easy ride height adjustment, allowing you to dial in the perfect stance for your vehicle.

Every QA1 aluminum shock is 100% dyno tested and serialized at their Minnesota facility to ensure consistent damping performance across all units. Designed for a straightforward bolt-in installation, these shocks are also fully serviceable and rebuildable to ensure long-term durability and performance.

• Manufacturer Part Number: MS303
• Adjustment Type: Single Adjustable (Simultaneous Compression and Rebound)
• Material: Lightweight Billet Aluminum
• Bushing Size: 7/16in
• Compressed Length: 7.88in
• Extended Length: 11in
• Construction: 100% Dyno Tested and Serialized
• Serviceability: Serviceable and Rebuildable by QA1 Authorized Centers
• Origin: Made in the USA

Fits select 1955-1981 GM vehicles, including Chevrolet Bel Air, Camaro, Chevelle, Pontiac Firebird, GTO, and Buick Skylark.

The QA1 GM Pro Front Coil-Over Shock Absorber (GS501) provides precision-tuned suspension control for classic GM vehicles. Featuring a single-adjustable knob, this shock allows you to adjust compression and rebound simultaneously, making it easy to dial in your suspension for specific driving styles or track conditions. Constructed from lightweight billet aluminum, it utilizes a bolt-in design that installs directly to factory stock mounting points while providing the added benefit of adjustable ride height.

• MPN: GS501
• Adjustment Type: Single adjustable (simultaneous compression and rebound)
• Material: Lightweight billet aluminum
• Dimensions: 10.125-inch compressed / 15-inch extended length
• Mounting: Stock mount compatible for easy bolt-in installation
• Quality Standards: 100% dyno tested and serialized
• Sustainability: Fully serviceable and rebuildable by QA1 authorized service centers
• Origin: Made in the USA

The QA1 Proma Star Series Double Adjustable Coil-Over Shock (MPN: DD401) provides high-performance damping and independent tuning for custom chassis and suspension applications. Designed for drivers who demand precision, this shock features two adjustment knobs to control rebound and compression separately, making it equally effective on the street, drag strip, or road course.

Constructed with a lightweight aluminum body and 100% dyno-tested for quality, the DD401 is built for durability and consistency. The bearing mount configuration minimizes deflection and is ideal for mounts requiring misalignment. When paired with a standard 2.5-inch ID coil spring (sold separately), this shock allows for quick and easy ride height adjustments to achieve the perfect stance and corner balance.

• Valving: Double-adjustable independent compression and rebound tuning.
• Mounting: Bearing mount design reduces deflection and supports misalignment.
• Dimensions: 10.125-inch compressed length and 14-inch extended length.
• Construction: Lightweight aluminum body with integrated adjustment knobs.
• Ride Height: Fully adjustable spring seat for easy height tuning.
• Compatibility: Requires a 2.5-inch inner diameter (ID) coil spring.
• Warranty: Eligible for a Limited Lifetime Warranty (requires registration).
• Origin: Proudly made in the USA.
• Manufacturer Part Number: DD401

Fits 2011-2014 Ford Mustang Base, GT, and Shelby GT500.

The Koni STR.T (Orange) front strut is designed to provide an entry-level performance upgrade for your Mustang's suspension. Part of the 8750 Series, this non-adjustable strut features a twin-tube, low-pressure gas design that delivers improved handling and body control without the complexity of adjustable damping. It is an ideal choice for drivers looking to restore or improve their vehicle's handling characteristics, whether using factory springs or performance lowering springs.

• Series: STR.T (Orange) 8750
• Design: Twin-tube low-pressure gas charged
• Adjustment: Non-adjustable fixed damping
• Placement: Front
• Manufacturer Part Number: 8750 1108

The JKS Manufacturing Fox 2.0 Adventure Series Universal Shock provides race-proven damping technology for custom suspension setups. Engineered with a 2.0-inch metal-impacted 6061-T6 aluminum body, this shock effectively dissipates heat while resisting rust and debris. The internal floating piston (IFP) design separates the high-pressure nitrogen gas from the shock oil, preventing aeration and ensuring fade-free performance across varying terrain.

• Series: Fox 2.0 Adventure Series
• Extended Length: 19.31 inches
• Collapsed Length: 13.22 inches
• Shock Stroke: 6.09 inches
• Body Diameter: 2.0 inches
• Mounting Style: BP (Bar Pin) to Clevis
• Internal Floating Piston (IFP) technology eliminates oil foaming
• Clear-anodized finish for corrosion resistance

This universal shock is ideal for custom builders requiring specific travel lengths and mounting configurations. The BP/Clevis arrangement provides a secure attachment point for applications utilizing factory-style bar pin mounts and clevis-style brackets.

Fits 2017-2024 Nissan Titan (S, SV, SL, PRO-4X, and Platinum Reserve models).

The Bilstein B6 4600 Series shock absorber is engineered as a high-performance direct-fit upgrade to original equipment on stock-height 2017-2024 Nissan Titan trucks. Featuring a 46mm monotube design, these shocks provide consistent, fade-free damping performance by efficiently dissipating heat during operation.

Each shock utilizes a unique, velocity-sensitive, digressive piston that instantly reacts to changing road conditions for superior stability and comfort. These units are specifically tuned for the Titan chassis to deliver a significant improvement in ride quality and handling over the factory dampers. Designed for ease of installation, they utilize your vehicle's OEM springs and mounting hardware.

• Consistent Performance: 46mm monotube design prevents aeration and ensures fade-free operation in all conditions.
• Digressive Valving: Piston reacts to road inputs to optimize control and ride comfort.
• Application Specific: Custom-tuned for the weight and suspension geometry of the Nissan Titan.
• Direct Fit: Seamlessly replaces factory shocks while retaining OEM springs and hardware.
• Manufacturer Part Number: 24-288361

Fits select 2002-2024 Mercedes-Benz G500, G55 AMG, G550, G63 AMG, G65 AMG, and GL550 models.

The Bilstein B6 4600 Series shock absorber (MPN: 24-016360) is engineered as a precision-tuned, direct-fit upgrade for stock-height Mercedes-Benz SUVs. Utilizing a 46mm monotube design, this rear shock ensures consistent, fade-free performance by dissipating heat more efficiently than traditional twin-tube designs, providing the control required for the G-Class and GL-Class chassis.

Each unit features Bilstein’s signature velocity-sensitive, digressive piston, which adapts immediately to changing road surfaces for improved stability and comfort. Tuned specifically for these applications, the B6 4600 replaces worn factory shocks to restore and enhance handling without requiring modifications to your OEM springs or mounting hardware.

• 46mm monotube architecture for superior heat management and consistent damping.
• Application-specific tuning maintains ride comfort while increasing vehicle control.
• Digressive valving reacts instantly to road inputs for improved handling.
• Direct-fit installation to factory mounting points using original hardware.
• Manufacturer Part Number: 24-016360

Vehicle Fitment:

• 2002-2008 Mercedes-Benz G500 Base
• 2003-2011 Mercedes-Benz G55 AMG Base
• 2009-2018 Mercedes-Benz G550 Base
• 2022-2024 Mercedes-Benz G63 4x4 Squared AMG Base
• 2013-2018 Mercedes-Benz G63 AMG Base
• 2016-2018 Mercedes-Benz G65 AMG Base
• 2013 Mercedes-Benz GL550 4Matic
• 2010-2012 Mercedes-Benz GL550 Base

Fits select 2011-2018 BMW X3 and X4 models.

The Bilstein B4 OE Replacement front right strut assembly is specifically engineered to restore the original ride quality and handling performance of your vehicle. Designed as a direct-fit replacement for the factory damper, this twintube strut meets or exceeds OE standards, providing the consistent damping and stability required for safe operation. By replacing a worn or leaking factory unit with Bilstein's world-famous quality, drivers can reclaim the intended driving comfort and safety profile of their BMW.

Utilizing Bilstein Gas Pressure Technology, the 22-197689 strut maintains constant pressure on the oil to prevent aeration and foaming. This ensures maximum damping power and reliability under various road conditions. Each unit is finished to withstand the rigors of daily driving while providing high power reserves for improved safety.

• Manufacturer Part Number: 22-197689
• Position: Front Right
• Internal Design: Twintube Strut
• Technology: Bilstein Gas Pressure
• Direct-fit OE replacement to restore original driving characteristics
• High power reserves for maximum safety and control

Fitment Table:

Fits select 2016-2019 Ford Escape (S, SE, SEL, Titanium).

The Bilstein B4 OE Replacement rear damper (19-298962) is specifically engineered to restore your vehicle's original ride characteristics, handling, and safety. Designed to meet or exceed original equipment standards, these shocks are the ideal choice for drivers looking to maintain factory-level performance and comfort without compromising on durability.

• Restores original driving comfort and handling precision
• High power reserves for maximum safety in all driving conditions
• Engineered to meet or exceed factory OE standards
• Direct-fit replacement for the factory rear shock absorber
• Manufacturer Part Number: 19-298962

Fits 2005-2015 Nissan Xterra (Off-Road, PRO-4X, S, SE, and X models).

The Rancho RS9000XL series delivers industry-leading flexibility for Nissan Xterra owners who transition between daily commuting, heavy towing, and off-road trails. This rear shock absorber features a nine-position manual adjustment knob, allowing you to fine-tune damping levels to suit your specific load and terrain requirements. Whether you are hauling gear or navigating technical trails, these shocks provide the control needed to maintain vehicle stability.

Engineered for durability in extreme environments, the RS999314 utilizes a large tri-tube body (up to 2.75-in.) filled with all-weather fluid to maintain cooler operating temperatures and consistent control from -40 to 248°F. The 18mm nitro-carburized piston rod and 1.25-in. sintered iron piston provide the structural integrity required for hardworking SUVs.

• Adjustable Damping: Nine levels of performance for customized firmness and flexibility.
• Reduced Fade: Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping fade.
• Heavy-Duty Construction: 18mm nitro-carburized rod resists scuffs and corrosion; double-welded loops at stress points.
• Smooth Operation: Graphite-filled fluon-banded piston and polyurethane bushings absorb road harshness and enhance responsiveness.
• Protective Finish: Premium liquid metallic finish and red polyvinyl boot ensure long-lasting protection against the elements.
• Manufacturer Part Number: RS999314

Fits 2006-2009 Hummer H3 and H3T models, including Base, Adventure, Alpha, Luxury, X, and Championship Series. This Rancho RS9000XL front shock absorber (MPN: RS999309) provides an industry-leading nine levels of manual damping adjustment, allowing you to fine-tune your suspension for highway comfort, heavy towing, or technical off-road use.

Engineered for hardworking vehicles, the RS9000XL features a large 2.75-inch tri-tube body filled with all-weather fluid to maintain cooler operating temperatures under high-stress conditions. The nitrogen gas charge, pressurized to 120 PSI, significantly reduces oil foaming and damping fade. Built to withstand extreme environments, it is rated for internal temperatures ranging from -40°F to 248°F.

• Adjustable Control: 9-position manual knob for customized compression and rebound damping.
• Heavy-Duty Construction: 18mm nitro-carburized piston rod resists scuffs and corrosion; 1.25-in. sintered iron piston for structural integrity.
• Durability: Double-welded loops at high-stress points and a premium liquid metallic finish with a polyvinyl protective boot.
• Smooth Operation: Graphite-filled Fluon-banded piston and polyurethane bushings for improved responsiveness.

Includes a self-lubricating, low-friction seal to retain gas and oil, ensuring quicker rebound and smoother compression throughout the life of the shock.

The Rancho RS9000XL adjustable shock absorber delivers precise damping control for trucks, SUVs, and Jeeps. Designed for versatility across on-road and off-road environments, this fourth-generation shock features a 9-position adjustment knob that allows you to manually tune firmness to accommodate towing, hauling, or trail use. The heavy-duty tri-tube body (up to 2.38-in.) provides increased fluid capacity to manage heat and maintain consistent performance under load.

• Adjustable Damping: Nine-position knob offers customized control for varying terrain and load requirements.
• Thermal Management: Large tri-tube body filled with all-weather fluid handles internal temperatures from -40°F to 248°F.
• Nitrogen Gas Charged: Pressurized to 45-60 PSI to minimize aeration and reduce shock fade.
• Durable Construction: Features a graphite-filled fluon-banded piston and a low-friction, self-lubricating seal for smooth compression and rebound.
• Corrosion Resistance: Finished with a liquid metallic 2K paint for chip resistance and a polyvinyl protective boot.
• Installation: Includes polyurethane rebound bumpers and bushings for enhanced responsiveness.
• Part Number: RS994012
• Warranty: Covered by Rancho’s Limited Lifetime Warranty.

Fits select 1994-2013 Dodge and Ram 1500, 2500, and 3500 models with 0-3" of front lift.

The Bilstein B8 5160 remote reservoir shock absorber (25-311754) is engineered as a direct-fit solution for lifted trucks requiring increased cooling capacity and wheel travel. Unlike traditional shocks, the external reservoir significantly boosts oil volume, allowing for superior heat dissipation during aggressive off-road use. The 46mm monotube design ensures consistent, fade-free damping performance regardless of terrain.

Each shock features velocity-sensitive digressive valving, specifically tuned for your vehicle's weight and suspension geometry. To ensure a clean, professional installation, Bilstein includes a 360-degree swivel banjo hose fitting and a billet reservoir mount where applicable, providing a low-profile fit that clears factory components.

• Manufacturer Part Number: 25-311754
• Design: 46mm Monotube with Remote Reservoir
• Construction: Zinc plated finish for durability
• Valving: Self-adjusting digressive disc valving
• Installation: Direct bolt-on for front suspension
• Features: 360-degree swivel banjo hose for easy reservoir positioning

Fits select 1965-2025 Chevrolet, GMC, Ford, and Dodge trucks, including Silverado/Sierra 1500, C10/C1500, F-150, F-250/F-350 Super Duty, Ranger, and Ram 1500 models. This MaxTrac twin-tube gas shock is specifically engineered for use with rear lift coils, providing the necessary dampening and travel for lifted applications.

Constructed with a loop-to-loop mounting configuration, this shock includes two 9/16-inch sleeves and all necessary hardware for a straightforward installation. To ensure proper operation and longevity, this unit must be installed with the shock shaft oriented toward the top of the vehicle.

• Manufacturer Part Number: 2000LL-4
• Shock Type: Twin Tube Gas
• Extended Length: 20.30 in.
• Collapsed Length: 12.40 in.
• Mounting Style: Loop to Loop
• Hardware Included: Yes (Includes two 9/16 in. sleeves)
• Installation Note: Must be installed with shock shaft towards the top

Fits 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited (Rubicon, Sahara, Sport, X, 70th/75th Anniversary).

The Skyjacker COMP BOX JK20-H is a 2-inch lift solution engineered to provide additional ground clearance and a more aggressive stance while maintaining the Jeep JK's factory ride quality. Designed for both daily driving and off-road use, this component box provides the height and clearance needed for larger tire packages and improved handling without compromising suspension geometry.

• Provides 2 inches of suspension lift
• Engineered to maintain factory ride quality and response
• Includes all necessary mounting hardware for a complete installation
• Detailed instructions provided for straightforward fitment
• Compatible with both 2WD and 4WD models
• Backed by a Limited Lifetime Warranty
• Manufacturer Part Number: JK20-H

Fits 2002-2008 Mini Cooper Base and S models.

The Koni Sport 8741 Series, commonly known as the Koni Yellow, is designed for drivers who demand exceptional handling and road holding. This left front strut features an externally adjustable rebound setting, allowing you to fine-tune the suspension damping to suit your driving style or road conditions without removing the unit from the vehicle. Built with a twin-tube low-pressure gas charged design, it provides consistent performance and improved steering response over factory components.

• Manufacturer Part Number: 8741 1440LSPOR
• Position: Left Front
• Design: Twin-tube low-pressure gas charged
• Adjustment: Externally rebound adjustable
• Finish: Koni Sport Yellow paint

Fits 1998-2005 Porsche 911 (996) models including Carrera, Carrera 4, Carrera 4S, Targa, and Turbo.

The Koni Sport (Yellow) 8241 Series rear shock absorber is engineered for drivers seeking improved handling and a sporting driving experience without sacrificing ride quality. These shocks focus on exceptional road-holding and manageable damping characteristics. The twin-tube low pressure gas design provides consistent performance, while the external rebound adjustment allows you to fine-tune the suspension to your driving style or specific road conditions without removing the shock from the vehicle.

• Manufacturer Part Number: 8241 1274SPORT
• Series: Koni Sport (Yellow) 8241
• Design: Twin-tube low pressure gas charged
• Adjustment: Externally rebound adjustable
• Position: Rear
• Improved body roll control and steering response

Engineered for high-speed off-road performance and professional racing applications, the King Shocks 2.5 Performance Race (PR) Series coilover provides exceptional damping control and durability. This 8-inch travel shock features a large 2.5-inch diameter bore to increase fluid capacity and reduce heat buildup during aggressive cycling.

The included hose-mounted remote reservoir significantly increases oil volume and surface area, allowing for superior cooling and consistent valving performance under extreme conditions. This unit is shipped without springs, allowing fabricators and tuners to select the precise spring rates required for their specific vehicle weight and suspension geometry.

• Manufacturer Part Number: PR2508-COHR
• Series: 2.5 Performance Race (PR)
• Travel: 8 inches
• Shock Diameter: 2.5 inches
• Reservoir Type: Hose Remote Reservoir
• Finish: Cadmium plated cylinders for long-lasting protection
• Construction: Aircraft-quality aluminum components and heat-treated alloy steel shafts

Fits select 2017-2024 Audi A4, A4 Quattro, A4 allroad, A5 Quattro, A5 Sportback, S4, S5, and S5 Sportback.

The Bilstein B4 OE Replacement (DampTronic) shock absorber is a direct replacement for the electronically adjustable dampers found on many modern Audi models. This rear damper is specifically engineered to maintain the original ride quality and handling characteristics of your vehicle by integrating seamlessly with the factory electronic control system. It provides a reliable solution for restoring the active suspension performance that often degrades as factory components wear out.

• Direct OE replacement for electronically adjustable suspension systems
• Maintains original driving comfort, high power reserves, and vehicle safety
• Precision valving to meet or exceed original manufacturer standards
• DampTronic technology ensures full compatibility with factory drive modes
• Manufacturer Part Number: 26-296029

Fits 1997-2004 Porsche Boxster models (Base, Roadster, S, and S Special Edition).

The Bilstein B6 Performance damper is the definitive upgrade for Porsche Boxster (986) owners seeking improved handling and stability without sacrificing ride quality or changing factory springs. Unlike standard replacement shocks, the B6 series features application-specific valve settings designed to enhance the chassis dynamics of the 986 platform. This rear twintube strut provides optimum grip and enhanced lane stability during both spirited driving and daily commutes.

By utilizing Bilstein gas-pressure technology, these dampers maintain consistent performance under load while reducing aeration. Each unit is rigorously tested to meet or exceed original equipment standards, ensuring a direct-fit installation that integrates perfectly with your existing suspension components. The B6 series allows you to retain your original springs while gaining significantly improved safety and handling performance.

• Series: B6 Performance
• Position: Rear
• Internal Design: Twintube
• Part Number: 22-046222
• Technology: Gas-pressure technology
• Valving: Vehicle-specific ride tuning
• Fitment: Designed for use with original factory springs

Vehicle Fitment

Fits 1997-2004 Porsche Boxster (986) models, including Base, Roadster, S, and S Special Edition.

The Bilstein B6 Performance damper is a premium suspension upgrade engineered to enhance the handling characteristics of your Porsche without the need for lowering springs. These front struts are designed to be paired with your factory OE springs, offering a significant improvement in damping control and vehicle stability. Using application-specific valve settings, Bilstein B6 dampers provide optimum grip and lane stability in both daily driving and extreme maneuvers.

• Performance Engineering: Monotube gas-pressure design for consistent, fade-free performance and superior heat dissipation.
• Direct OE Replacement: Designed to bolt directly into the factory location while utilizing the original series spring.
• Vehicle-Specific Tuning: Rigorously road-tested and tuned specifically for the Porsche 986 chassis to ensure world-class ride quality.
• Enhanced Safety: Improved damping rates lead to better tire contact with the road and increased braking stability.
• Manufacturer Part Number: 22-046215

Vehicle Fitment