Fits 2025+ Toyota 4Runner models.

The ARB Old Man Emu MT64 suspension system is engineered for drivers who demand consistent damping performance across diverse terrain. Utilizing a massive 64mm internal bore, these monotube shocks provide exceptional oil capacity and heat dissipation, preventing shock fade during high-speed desert runs or technical off-road climbs. This comprehensive kit (MPN 2135K) includes Old Man Emu Upper Control Arms (UCAs), which are essential for correcting suspension geometry and maintaining proper caster and camber settings once the vehicle is lifted, ensuring factory-like handling and tire wear.

• 64mm large-bore internal bypass monotube shock design for maximum heat management
• Includes Upper Control Arms (UCAs) to restore alignment geometry and ball joint travel
• Application-specific tuning for the 2025+ 4Runner chassis and weight distribution
• Designed for long-range durability in extreme overlanding environments
• Manufacturer Part Number: 2135K

Fits 2025+ Toyota 4Runner models.

The ARB Old Man Emu MT64 suspension system is engineered for drivers who demand consistent damping performance during extended off-road travel without sacrificing on-road refinement. This kit provides a 3-inch front lift and a 2-inch rear lift, creating the necessary clearance for larger tires and improving the vehicle's approach and departure angles. Utilizing a massive 64mm internal bore, the MT64 shocks dissipate heat more effectively than standard monotube designs, ensuring fade-free performance over washboard roads and technical trails.

• Manufacturer Part Number: 2134K
• Front Lift Height: 3 inches
• Rear Lift Height: 2 inches
• Shock Series: MT64 (64mm Monotube)
• Application-specific valving for the 2025+ 4Runner platform
• Durable construction designed for heavy overland loads and varied terrain

ARB Old Man Emu (OME) struts and cartridges are engineered to improve vehicle handling and control, whether you are navigating technical off-road trails or hauling heavy loads on the highway. These Nitrocharger components are designed to replace factory units, offering a significant upgrade in damping performance and durability. By utilizing specific valving tuned for increased spring rates and accessory weight, they help eliminate the wallowing feel often associated with stock suspension systems under load.

• Engineered for superior ride quality and increased load-carrying capacity
• Heavy-duty construction designed to withstand harsh off-road environments
• Precision-tuned valving to match specific spring rates and vehicle weights
• Direct-fit replacement for factory struts or cartridges
• Includes necessary hardware for a secure installation
• Manufacturer Part Number: 2121K

Improve your vehicle's handling and load-carrying capacity with the ARB Old Man Emu (OME) Nitrocharger Sport Strut. Engineered to replace factory suspension components, this nitrogen gas-charged strut is valved specifically to manage the increased stresses of off-road driving while maintaining a controlled, comfortable ride on pavement. The twin-tube design provides protection for internal components from rock damage, ensuring reliability in harsh environments.

• Triple-lip oil seal and gas retention system for long-term performance under high-temperature cycles.
• Heavy-duty 18mm chrome hardened shaft for maximum structural strength.
• Vehicle-specific valving improves damping control and reduces body roll.
• Internal nitrogen gas charging provides consistent performance and reduces aeration.
• Integrates seamlessly with Old Man Emu coil springs and suspension systems.

Manufacturer Part Number: 2120K

Enhance your vehicle's handling and ride control with the ARB Old Man Emu (OME) Nitrocharger Sport Strut. Engineered to bridge the gap between street comfort and off-road durability, this strut (MPN: 2119K) is designed to handle the increased loads and stresses of technical terrain and heavy towing. It utilizes a sophisticated twin-tube design to protect the internal components from stone damage while providing consistent dampening performance.

Built with a focus on longevity, this assembly features a heavy-duty triple-lip oil seal and a hardened chrome piston rod to withstand harsh environments. The high-flow piston and advanced valving are tuned to reduce aeration and oil foaming, ensuring your suspension maintains its performance even during extended cycles of high-frequency impacts.

• Manufacturer Part Number: 2119K
• Series: Old Man Emu Nitrocharger Sport
• Design: Durable twin-tube construction
• Components: Includes premium triple-lip oil seal and high-flow internal piston
• Function: Replaces factory struts to improve stability and load-carrying capacity

ARB Old Man Emu (OME) Nitrocharger Sport struts are engineered to transform vehicle handling and control across both highway and off-road terrain. As a direct replacement for factory components, the 2118K strut utilizes a twin-tube design to provide a more stable, controlled ride, particularly when the vehicle is equipped with heavy accessories or navigating uneven surfaces.

Built to withstand the rigors of 4x4 travel, these struts feature specific valving to manage the increased weight and leverage of larger tires and aftermarket armor. The internal components are protected by a heavy-duty outer tube, ensuring consistent damping performance even in harsh conditions.

• Twin-tube design for increased durability and protection of internal components
• Triple-lip oil seal and gas retention system for long-term reliability
• High-quality bushings for reduced noise and improved service life
• Heavy-duty 18mm chrome-hardened piston rod
• Durable powder-coated finish for corrosion resistance
• Manufacturer Part Number: 2118K

The ARB Old Man Emu (OME) Nitrocharger Sport Strut (MPN: 2117K) is a heavy-duty suspension upgrade engineered to deliver superior ride control and durability. Designed to replace restrictive factory dampers, these Nitrocharger Sport struts utilize vehicle-specific valving to account for various load requirements and off-road conditions, ensuring the suspension remains composed on uneven terrain.

• Twin-tube design protects the internal piston from stone damage and harsh impacts.
• Triple-lip oil seal and gas retention system for long-term reliability under high heat.
• 18mm induction-hardened chrome piston rod for maximum strength and corrosion resistance.
• Large-bore 35mm teflon-banded piston provides increased oil volume for consistent damping.
• Includes high-quality bushings and hardware required for installation.

Each OME strut is individually dyno-tested to verify performance and is designed as a direct-replacement component to enhance stability, reduce body roll, and improve overall vehicle handling for daily driving and overland travel.

ARB Old Man Emu (OME) Struts and Cartridges are engineered to deliver significant improvements in ride quality, vehicle control, and handling. These suspension components are designed to withstand the rigors of off-road use while maintaining refined street performance. By utilizing precision-tuned valving, these struts effectively manage the damping requirements of vehicles equipped with additional weight from bumpers, winches, or heavy cargo loads.

• Nitrogen gas-charged design reduces oil aeration and heat fade for consistent performance
• Heavy-duty construction for increased longevity in harsh environments
• Precision-valved to provide optimal damping and wheel travel control
• High-quality multi-lip seals help prevent leakage and protect internal components

• Manufacturer: ARB
• Series: Old Man Emu (OME)
• Part Number: 2116K

Fits select 2019-2026 BMW 230i, 330i, 430i, M240i, M340i, and M440i models. This Dinan anti-roll bar set is engineered specifically for the G-series chassis to deliver a more responsive and level handling experience. By reducing body roll, these bars maintain a more consistent tire contact patch, increasing mechanical grip and driver confidence through corners without compromising ride quality.

Both bars are manufactured from high-tensile strength alloy steel with a tubular (hollow) design, providing maximum torsional rigidity while minimizing unsprung weight. The rear bar features a 2-hole adjustable design, allowing you to fine-tune the suspension balance for your specific driving environment or comfort preferences. This set includes performance polyurethane bushings and grease for a complete installation.

• Manufacturer Part Number: D120-0630
• Front Sway Bar: 28mm (replaces stock 26.1mm) - 50% stiffer
• Rear Sway Bar: 19mm (replaces stock 17.8mm) - 54-66% stiffer
• Construction: Lightweight tubular alloy steel
• Rear Adjustability: 2-hole adjustable for fine-tuning
• Included Hardware: Polyurethane bushings and specialized grease

Fits 1992-2000 Lexus SC300 and SC400 (JZZ30/UZZ30).

Tein Flex Z coilovers provide a high-performance suspension solution for the Lexus SC chassis, offering full ride height adjustability without sacrificing damper stroke. Engineered in Yokohama, Japan, the Flex Z series utilizes a twin-tube system designed to balance street comfort with the stiffness required for spirited driving. This setup allows you to lower your vehicle's center of gravity while maintaining the compliance needed for daily road use.

The VST60-C1SA3-C kit features 16-level damping force adjustment, enabling precise control over rebound and compression to suit your specific tire setup and driving style. By using a sealed structure design, Tein provides a cost-effective, high-quality damper that is replaced via cartridge when worn, rather than requiring a traditional rebuild. Each unit is finished with Tein's signature green powder coat and ZT coating on the shell case for superior corrosion resistance against the elements.

• Twin-tube internal construction for improved ride quality and street performance
• 16-way damping force adjustment (compatible with EDFC controllers)
• Full-length ride height adjustment allows for independent preload and height settings
• Pillow ball or reinforced rubber upper mounts included for direct steering response
• ZT-coated shell case and Teflon-coated threads for longevity and ease of adjustment
• Manufacturer Part Number: VST60-C1SA3-C

Fits 2015-2021 Subaru WRX (VAG) and WRX STI (VAF).

The Tein EnduraPro Plus is a high-performance, OE-shape shock absorber designed as a direct replacement for factory dampers. As part of the EnduraPro Plus series, this unit features 16-level damping force adjustment, allowing you to tune your suspension for daily comfort or spirited performance. These shocks utilize a twin-tube system for a smooth stroke and incorporate Tein's proprietary Hydraulic Bump Stopper (H.B.S.) technology. H.B.S. effectively manages the energy of heavy impacts, reducing the harshness associated with bottoming out while maintaining vehicle stability under load.

• 16-level damping force adjustment for precision ride control
• Hydraulic Bump Stopper (H.B.S.) technology improves durability and comfort
• Twin-tube internal construction for consistent damping performance
• Direct OE-shape replacement compatible with factory springs and mounting points
• High-durability shell case with a rust-proof powder coat finish
• Manufacturer Part Number: VSSB0-B1DS2

Fits 2012-2021 Toyota 86 and Subaru BRZ.

The Tein RX1 coilover system provides a high-performance suspension upgrade for the ZN6 and ZC6 chassis. This kit replaces the factory struts and springs with full-length adjustable dampers, allowing you to lower the vehicle's center of gravity and fine-tune its stance without sacrificing damper stroke. The RX1 series is engineered to handle the demands of spirited driving while maintaining composed ride quality, making it an ideal solution for enthusiasts looking to improve the handling dynamics of their 86 or BRZ.

• Full-length ride height adjustment allows independent tuning of height and spring preload
• Equipped with Tein Hydraulic Bump Stopper (HBS) technology to absorb high-impact loads
• 16-level damping force adjustment for precise control over ride characteristics
• High-tensile strength springs and durable powder-coated damper bodies
• Designed to bolt directly to factory mounting points
• Manufacturer Part Number: VSQ54-M1SS4

Fits 2006-2010 Scion tC (ANT10L).

Tein Flex Z coilovers deliver a high-performance suspension solution that balances daily street comfort with aggressive handling. This full-length adjustable system allows you to set your desired ride height without compromising suspension stroke or spring preload. Utilizing a twin-tube internal design, the Flex Z series provides a smooth ride over varied road surfaces while maintaining the damping control required for spirited driving.

The 16-level linear damping adjustment allows for precise tuning of the compression and rebound settings, making it easy to transition from a comfortable commute to a rigid track setup. These units feature Tein's signature green powder coating and ZT-coated threads for maximum corrosion resistance in harsh environments.

• Manufacturer Part Number: VSL52-CUSA4-C
• System Type: Twin-tube for improved ride quality and stroke
• Damping: 16-way adjustable damping force (EDFC compatible)
• Height Adjustment: Full-length adjustable shell case for independent height and preload
• Mounts: Includes reinforced rubber or pillow ball upper mounts where applicable
• Finish: Powder-coated body with ZT-coated threads for durability

Fits 2012-2013 Honda Civic. This Tein EnduraPro Plus kit provides a high-performance alternative to factory shock absorbers, utilizing an OE-shape design that compatible with original springs and top mounts. These dampers are engineered for drivers seeking improved handling and ride comfort without the complexity of a full coilover conversion.

• 16-Level Damping Adjustment: Features a needle valve system to simultaneously adjust compression and rebound, allowing you to fine-tune the suspension for different road conditions or load weights.
• Hydraulic Bump Stopper (HBS): Internal technology that converts the impact of full compression into thermal energy, significantly reducing vehicle oscillation and the harshness associated with bottoming out.
• Twin-Tube Construction: Provides a longer stroke with lower gas pressure, ensuring a smooth ride and consistent performance over varied terrain.
• Durability: Finished in Tein's signature green powder coat for superior corrosion resistance. High-strength shell cases and high-performance damper oil ensure longevity under heavy use.
• Manufacturer Part Number: VSHK2-B1DS2

Fits 1992-2002 Honda Prelude (BB1, BB2, BB6, and BB7) models.

The Tein Flex Z coilover kit provides a comprehensive suspension solution for Prelude owners seeking a balance of street comfort and aggressive handling. This full-length adjustable system allows you to set your desired ride height independently of spring preload, ensuring you maintain full suspension stroke even at lower settings. Built with a twin-tube internal structure, these coilovers are designed to absorb road irregularities effectively, making them ideal for daily driving and spirited weekend use.

• 16-level linear damping force adjustment (combined compression and rebound)
• Twin-tube system for improved ride quality on various road surfaces
• Full-length ride height adjustment system with minimal change in ride comfort
• Complete kit includes front and rear coilovers with integrated upper mounts
• Finished in Tein’s signature green powder coat for superior corrosion resistance
• Manufacturer Part Number: VSH92-C1SA3-C

Fits 2004-2006 Pontiac GTO.

Tein S.Tech springs are an ideal solution for drivers looking to improve handling and achieve a lower, more aggressive stance without compromising daily ride quality. These springs are designed specifically for the Pontiac GTO chassis and are compatible with OEM or OE-replacement dampers. Each spring is wound from high-tensile SAE9254V chrome vanadium steel to ensure long-term durability and resistance to sagging.

• Progressive spring rate design maintains comfort during cruising while stiffening under load
• Lowered center of gravity reduces body roll and improves turn-in response
• Durable green powder-coat finish provides excellent protection against the elements
• Extensively road-tested to ensure the optimal balance of performance and aesthetics
• Manufacturer Part Number: SKJ06-S3B00

Fits 2017-2019 Honda Civic Type-R (FK8).

Tein S.Tech lowering springs are designed to provide a more aggressive stance and improved road-holding for the FK8 Honda Civic Type-R. By lowering the vehicle's center of gravity, these springs reduce body roll during cornering and provide a more planted feel. The S.Tech series is specifically engineered to work with factory dampers, offering a balance between performance-oriented handling and street-friendly ride quality.

• Designed for a lower center of gravity and improved handling
• Progressive spring rate design maintains ride quality during daily driving
• Finished in Tein's signature green powder coat for excellent corrosion resistance
• Engineered for compatibility with original equipment (OE) dampers
• Manufacturer Part Number: SKHK8-S3B00

Fits 2008-2015 Scion xB models.

Tein S.Tech lowering springs are a functional suspension upgrade designed to provide an aggressive stance and improved road holding without sacrificing daily ride quality. By lowering the vehicle's center of gravity, these springs reduce body roll during cornering and improve steering response. The progressive spring rate design ensures the suspension remains compliant over minor road imperfections while providing the necessary stiffness during spirited driving.

Each spring is produced using a cold-forming process with SAE9254V steel, a material chosen for its high tensile strength and resistance to sagging. The signature Tein green powder-coat finish offers durable protection against corrosion and environmental wear. These springs are engineered to work with OEM or OEM-replacement dampers for a straightforward installation.

• Manufacturer Part Number: SKC24-S3B00
• Material: Cold-formed SAE9254V steel
• Design: Progressive spring rate for optimal comfort and performance
• Finish: Durable green powder coating
• Fitment: Direct replacement for factory coil springs

Fits 2003-2005 Honda Civic (EP3).

Tein S.Tech Lowering Springs are an excellent choice for drivers looking to achieve a more aggressive stance and improved handling without sacrificing daily ride comfort. By lowering the center of gravity, these springs reduce body roll during cornering and nose-dive under braking, providing a more planted feel on the road. Each spring is specifically tuned for the EP3 chassis to ensure compatibility with either OEM or aftermarket performance dampers.

• Designed for an aggressive drop and enhanced road-holding performance
• Progressive spring rate design maintains high ride quality during normal driving
• Cold-formed from high-tensile SAE9254V chrome silicon steel for maximum sag resistance
• Green powder coat finish provides durable protection against corrosion and the elements
• Includes rubber silencer sleeves where applicable to prevent spring noise
• Manufacturer Part Number: SKA92-S3B00

Fits 1992-1995 Honda Civic and 1993-1997 Honda Del Sol.

Tein S.Tech Lowering Springs are an excellent first step toward suspension tuning, offering a more aggressive stance and improved road holding. These springs are specifically engineered to lower your vehicle's center of gravity, reducing body roll during cornering and nose-dive under braking. Designed for compatibility with OEM or performance replacement shocks, the S.Tech line balances a lowered look with the spring rates necessary for daily drivability.

• Manufactured from high-grade spring steel for maximum sag resistance and longevity
• Progressive spring rate design provides a comfortable ride during normal cruising and increased support during spirited driving
• Signature green powder coat finish for superior corrosion resistance
• Designed as a direct-fit replacement for factory springs
• Includes silencer rubbers where applicable to eliminate noise and vibration
• Manufacturer Part Number: SKA00-C3B00

The SPC Performance Pro Series Front Adjustable Upper Control Arm (92054) provides the precise suspension geometry tuning required for competitive racing. Designed for GM Full Size chassis, this adjustable arm allows for granular control over alignment settings to maximize cornering performance and tire efficiency on the track.

• Includes 5-inch adjusting sleeves for quick, accurate track-side length modifications
• Features a dedicated GM Full Size ball joint plate for robust component integration
• High-strength rod ends replace factory bushings to eliminate deflection and improve steering response
• Race-only construction designed specifically for high-stress competition environments
• Manufacturer Part Number: 92054

Note: This component is engineered for competition use only and is not intended for street-driven vehicles.

Fits 2021-2026 Ford Bronco (including Badlands, Raptor, Wildtrak, and Heritage Edition).

Engineered to restore driveability and alignment on lifted vehicles, these SPC Performance adjustable upper control arms provide the necessary caster and camber correction to eliminate wandering and uneven tire wear. The forged steel and chromoly design provides superior strength for off-road environments while increasing clearance around the spring bucket to accommodate oversized tires.

This kit features SPC’s patented maintenance-free ball joints, which offer up to 80° of articulation—a 25% larger stud cross-section than OE for increased durability. The inclusion of xAxis™ sealed flex joints in bonded rubber sleeves ensures full suspension travel and factory-level NVH (Noise, Vibration, and Harshness) characteristics. Each arm is finished with an E-Nickel coating for maximum corrosion protection in harsh climates.

• Adjustment Range: Front Camber ±2.00˚ / Caster -1.00˚ to +3.00˚
• Articulation: 80° Ball Joint range of motion
• Construction: Forged steel with chromoly tubing and billet machined steel nose
• Joints: Sealed xAxis™ flex joints and maintenance-free greaseable ball joints
• Hardware: Sold as a pair (1 per axle required)
• Compatibility: Extended threads for knuckle gusset kit compatibility
• MPN: 35690

SPC Performance EZ ON HD centering sleeves provide a precise solution for wheel-end runout on heavy-duty steer wheels and brake drums. By centering both the wheel and the drum to the hub, these sleeves minimize common ride quality issues including wheel vibrations, brake pedal pulsations, and wheel hop.

The unique threadless design allows for rapid installation, significantly reducing service time compared to traditional threaded options. These sleeves are an essential shop tool for ensuring proper alignment of rotating components, helping to improve tire wear and braking consistency by ensuring the wheel and drum stay perfectly concentric to the hub.

• Manufacturer Part Number: 32126
• Design: Threadless EZ ON for rapid centering
• Compatibility: 1.34" to 1.37" hole diameters
• Sleeve Depth: 0.5"
• Quantity: Pack of 6 sleeves
• Function: Eliminates vibration and pulsation caused by off-center mounting

Fits 2016-2020 Lexus GS-F.

RS-R Best-i Active Series coilovers are engineered specifically for owners who want to lower their vehicle without sacrificing the factory Adaptive Variable Suspension (AVS) functionality. Unlike standard coilover kits that require an AVS delete, the Active series features specialized damper internals and mounting for the factory actuators, allowing you to maintain full control of your suspension modes from the cockpit.

Built to provide a balance of performance and comfort, these coilovers utilize high-quality internal components and refined valving to reduce body roll and improve steering response. The full-length adjustment design allows for independent ride height and spring preload settings, ensuring you can achieve the perfect stance while maintaining full suspension stroke.

• Retains factory Lexus Adaptive Variable Suspension (AVS) system compatibility
• Full-length height adjustment for precise corner balancing and stance
• High-quality steel construction with specialized coatings for corrosion resistance
• Specially formulated damper oil for consistent performance under high thermal loads
• Designed as a direct bolt-on replacement for factory struts and springs
• Manufacturer Part Number: XLIT997MA

Fits 2022-2024 Acura Integra. RS-R Down Sus springs provide a refined lowering solution for the 2022+ Acura Integra, balancing improved handling with daily-drive comfort. These H083D springs are designed to reduce fender gap and lower the vehicle's center of gravity without compromising the factory ride quality.

• Optimized spring rates for enhanced cornering stability and reduced body roll
• Provides a moderate drop for an improved aesthetic and aerodynamic profile
• Compatible with factory dampers to maintain OEM ride characteristics
• High-strength construction ensures minimal sag over the life of the vehicle
• Direct-fit replacement for factory coil springs
• Manufacturer Part Number: H083D

Fits select 2005-2016 Ford F-250 Super Duty and 2014-2020 Ram 2500 models.

The Rancho RS9000XL series provides precise damping control for heavy-duty trucks used in towing, hauling, and off-road environments. Featuring a manual nine-position adjustment knob, these shocks allow you to quickly transition between a soft street ride and firm control for high-load or off-road conditions. The tri-tube body is filled with all-weather fluid to maintain consistent performance from -40 to 248°F, while nitrogen gas pressurization (45-60 PSI) prevents oil aeration and damping fade.

• Adjustable Performance: Nine-position knob allows for customized firmness and damping control.
• Heavy-Duty Construction: Up to 2.38-inch tri-tube body provides increased fluid capacity for cooler operation.
• Enhanced Durability: Dual-component 2K liquid metallic finish and a polyvinyl protective boot resist chips and corrosion.
• Smooth Operation: Graphite-filled fluon-banded piston and polyurethane bushings reduce friction and absorb road harshness.
• Part Number: RS994048

Fits select 1987-1995 Jeep Wrangler models.

Adjust your vehicle's pinion angle and restore proper driveline geometry after installing a lift kit or aftermarket suspension components with this Rancho leaf spring shim kit. These shims are specifically designed to correct the angle between the driveshaft and the differential, helping to eliminate vibration and prevent premature U-joint wear.

Precision-engineered from durable aluminum for long-term reliability, these shims measure 2.38 inches in width and provide a 2.5-degree correction angle. This kit includes a pair of shims to complete the installation on a single axle.

• Part Number: RS8125
• Shim Angle: 2.5 Degrees
• Width: 2.38 inches
• Material: Aluminum
• Quantity: Sold as a pair (2 shims)
• Warranty: Rancho limited one-year warranty

Fits 2024-2025 Toyota Tacoma SR, SR5, Limited, Trailhunter, and TRD models.

Old Man Emu BP-51 Internal Bypass Coilovers bring race-proven technology to your 2024-2025 Toyota Tacoma, offering a level of ride control and comfort that standard shock absorbers cannot match. These user-adjustable dampers utilize position-sensitive internal bypass technology to provide a plush ride during normal travel and significantly increased damping at the extremes of the stroke to prevent bottoming out. With 10 levels of independent compression and rebound adjustment, you can fine-tune your suspension on the vehicle to account for heavy equipment, varied terrain, or load-carrying requirements.

• Internal Bypass Technology: Position-sensitive damping provides a smooth ride over small bumps while increasing resistance as the shock compresses further.
• Independent Adjustment: Features 10 levels of compression and 10 levels of rebound damping to customize your ride for any weight or road condition.
• Advanced Construction: 6061-grade aluminum bodies with a Type III hard-anodized finish for superior heat dissipation and corrosion resistance.
• Remote Reservoir: External oil reservoir increases oil capacity to prevent overheating and shock fade during high-intensity off-road use.
• High-Quality Hardware: Includes all necessary mounting components for a direct replacement of the factory suspension system.
• Manufacturer Part Number: 1213K

Fits 2024-2025 Toyota Tacoma models including SR, SR5, Limited, TRD Sport, TRD Off-Road, TRD Pro, and Trailhunter.

Old Man Emu BP-51 coilovers represent a significant leap in suspension technology for the fourth-generation Tacoma. These user-adjustable internal bypass shock absorbers provide position-sensitive damping, allowing for a plush ride during normal travel while increasing stiffness at the end of the stroke to prevent bottoming out. Designed for the rigors of off-road use, the BP-51 series allows for independent on-vehicle tuning of both compression and rebound to accommodate varying loads and terrain types.

• Internal Bypass Technology: Provides position-sensitive damping for superior comfort and control across all suspension zones.
• Independent Adjustment: 10 levels of compression and 10 levels of rebound adjustment can be dialed in while mounted on the vehicle.
• Premium Construction: 6061-grade aluminum shock body with a Type III hard-anodized finish for maximum heat dissipation and corrosion resistance.
• Remote Reservoir: External oil reservoir increases oil capacity, aiding in cooling during extended high-speed off-road sections.
• Direct Fit: Engineered as a direct replacement for factory suspension systems, compatible with 2024+ Tacoma geometry.
• Manufacturer Part Number: 1212K

The King Shocks Standard 2.0 Compact Steering Stabilizer (STNR080) is engineered to provide superior damping performance, effectively eliminating bump steer and front-end shimmy in heavy-duty or off-road applications. Utilizing the same race-proven internal valving and high-quality materials found in King's performance shock lines, this compact stabilizer maintains steering control on rough terrain while reducing driver fatigue and steering wheel feedback.

• Shock Diameter: 2.0 in.
• Stroke Length: 8 in.
• Mounting Type: Loop-Loop
• Compressed Length: 14.660 in.
• Extended Length: 22.660 in.
• Manufacturer Part Number: STNR080