Fits 2002-2014 Subaru Impreza WRX (excluding 2002-2007 Wagons), 2004-2013 Forester, and 2005-2013 Legacy models.

Improve your vehicle's handling and cornering precision with PERRIN Front Endlinks (PSP-SUS-113). These performance endlinks provide a solid link between your front sway bar and the control arms, eliminating the flex and delay often associated with soft factory bushings. By providing a more direct transfer of energy, these endlinks allow your sway bar to work more effectively, reducing body roll during aggressive maneuvers.

Constructed for durability and precision, these components are an essential upgrade for any Subaru enthusiast looking to sharpen steering response or accommodate a thicker aftermarket sway bar. They bolt directly into factory mounting locations for a straightforward installation.

• Replaces flexible factory front endlinks for improved sway bar efficiency
• Enhances steering response and weight transfer during cornering
• Engineered to handle increased loads from performance driving
• Direct fit for select Subaru WRX, Forester, and Legacy platforms
• Manufacturer Part Number: PSP-SUS-113

Fits 2008-2009 Pontiac G8 and 2014-2017 Chevrolet SS.

The Pedders adjustable rear sway bar end link kit is an essential upgrade for any lowered G8 or SS. When you lower your vehicle, the factory-length end links can put the sway bar at an improper angle, causing binding or preload that degrades handling. This kit allows you to fine-tune the link length from 110mm to 135mm, ensuring the sway bar is neutralized at static ride height for optimal cornering performance.

Each link is built with heavy-duty ball joints and high-strength threaded bodies to withstand the increased loads of performance driving and stiff aftermarket sway bars. This kit (PED-424482) replaces the stock fixed-length components with a durable, adjustable solution.

• Adjustable Range: 110mm to 135mm center-to-center
• Position: Rear
• Construction: Heavy-duty ball joints for smooth articulation and long service life
• Finish: Corrosion-resistant coating for durability in all conditions
• MPN: PED-424482

Fits 2015-2022 Ford Mustang (S550) models.

Correct your suspension geometry and eliminate sway bar preload with the Pedders Adjustable Rear Endlink Kit. Engineered specifically for the S550 chassis, these endlinks allow for precise tuning, making them an essential upgrade for lowered Mustangs or those equipped with heavy-duty aftermarket sway bars. Pedders components are developed to address inherent weaknesses in the factory suspension, providing the ideal balance between street civility and performance handling.

Unlike standard fixed-length links, these adjustable units ensure your sway bar remains neutral at static ride height, improving cornering consistency and preventing unpredictable handling characteristics. Designed for the enthusiast driver, this kit offers a quiet, comfortable ride that performs exceptionally well on both the street and the track.

• Fully adjustable design for precise sway bar alignment and tuning
• Replaces weak or non-adjustable factory rear endlinks
• Essential for maintaining proper geometry on lowered vehicles
• Durable construction engineered to OE-level tolerances
• Manufacturer Part Number: PED-424480

Fits select 2013-2025 Ford Mustang, Subaru BRZ, Scion FR-S, and Toyota 86/GR86.

The Pedders Adjustable Front Endlink Kit (PED-424477) is engineered to correct suspension geometry and eliminate sway bar preload, a common issue when vehicles are lowered or equipped with aftermarket sway bars. By providing precise length adjustment, these endlinks ensure the anti-roll bar operates at the correct angle, significantly improving cornering response and handling consistency without sacrificing the ride quality needed for daily driving.

Pedders develops integrated suspension solutions by identifying and correcting weaknesses in the original equipment (OE) suspension. These endlinks are designed for the enthusiast driver who wants the "factory hot rod" feel—the ideal balance between civility and performance handling. Built to withstand higher-than-stock performance levels, these components help your vehicle maintain stability through aggressive maneuvers while remaining quiet and comfortable on the street.

• Manufacturer Part Number: PED-424477
• Position: Front
• Adjustability: Fully adjustable length to eliminate sway bar preload and optimize geometry
• Construction: Heavy-duty components designed for enthusiast performance and track durability
• Compatibility: Fits Ford S550/S650 Mustang and Subaru/Toyota ZN6/ZC6 and ZN8/ZD8 platforms

Fits 2005-2014 Ford Mustang (Base, GT, Boss 302, Shelby GT500) and 2012-2017 Hyundai Veloster (Base, Turbo, R-Spec).

The Pedders PED-424475 Front Adjustable Endlink Kit is engineered to resolve suspension geometry issues that occur when a vehicle is lowered or modified. By replacing fixed-length factory components, these adjustable endlinks allow you to eliminate sway bar preload, ensuring the anti-roll bar operates correctly across its full range of motion. This is a critical upgrade for maintaining handling precision and preventing premature wear on related suspension components.

Developed with an "OE-plus" philosophy, Pedders components identify and correct weaknesses in factory designs. These endlinks provide the adjustability needed for the enthusiast driver who demands sharp cornering performance without sacrificing the civility and comfort of a daily driver. Each kit is built to withstand increased performance loads while maintaining the quiet operation expected of a street-driven vehicle.

• Manufacturer Part Number: PED-424475
• Placement: Front axle
• Adjustment: Fully adjustable length to correct sway bar geometry and preload
• Construction: Heavy-duty materials designed to replace thin-gauge OE links
• Application: Direct fitment for S197 Mustang and first-generation Veloster chassis

Fits all 2005-2014 Ford Mustang S197 models including Base, GT, Boss 302, and Shelby GT500.

Pedders H/D Rear Stabilizer Links (PED-424402) are engineered to replace the prone-to-flex factory end links on the S197 chassis. These heavy-duty components improve the connection between the rear sway bar and the suspension, ensuring more consistent handling and immediate response during cornering. Pedders specialists identify weaknesses in original equipment (OE) designs and develop these components to correct them, providing an ideal balance between street civility and track-ready performance.

• Heavy-duty construction to withstand increased suspension loads.
• Direct replacement for OE rear stabilizer links.
• Maintains factory-level comfort while enhancing handling precision.
• Designed to complement both stock and upgraded sway bar setups.
• Manufacturer Part Number: PED-424402

Fits 2004-2006 Pontiac GTO Base.

The Pedders PED-424211 Heavy Duty Front Stabilizer Link is an engineered suspension solution designed to replace worn original equipment and correct factory weaknesses. This left-hand (LH) sway bar link features a robust ball/ball joint configuration, providing the ideal balance between civility for daily driving and the performance handling required by automotive enthusiasts.

Constructed to exceed OE standards, this link restores steering precision and eliminates noise caused by failing factory bushings. As a direct-fit replacement, it bolts into factory mounting points without modification, making it a critical upgrade for maintaining the chassis integrity of your GTO.

• Direct OE replacement for a precise fit
• Heavy-duty construction for improved durability and service life
• Ball/Ball joint design allows for smooth, articulated motion
• Specifically engineered to solve common suspension noise and handling play
• Positions: Front Left (LH)
• Manufacturer Part Number: PED-424211

Fits 2004-2006 Pontiac GTO Base.

Restore handling precision and eliminate suspension clunking with this Pedders Heavy Duty front stabilizer link. Designed as a direct replacement for the factory right-hand (RH) link, this component features a robust ball/ball joint configuration that allows for smooth articulation while resisting the deformation common in high-mileage or performance-driven OE units. By maintaining a firm connection between the sway bar and the front strut, this link ensures consistent roll control and improved steering response.

• Manufacturer Part Number: PED-424210
• Direct OE replacement for a precise fit
• Heavy-duty construction for increased durability over stock components
• Ball joint ends (Ball/Ball) for smooth, quiet operation
• Installation Side: Front Right (RH)
• Designed specifically for the GTO chassis to correct common suspension weaknesses

Fits 2004-2006 Pontiac GTO Base.

Pedders Heavy Duty Stabilizer Links are engineered as a direct OE replacement to address the common weaknesses found in factory suspension components. Designed to eliminate the flex and play associated with worn or undersized stock units, these stabilizer links restore the connection between your sway bar and suspension for more precise handling and improved steering response. Whether you are maintaining a daily driver or upgrading an enthusiast build, these links provide the ideal balance of civility and performance.

• Direct OE replacement ensures a precise fit to factory mounting points
• Heavy-duty construction for increased durability and resistance to bending under load
• Engineered to correct OE suspension weaknesses and maintain proper geometry
• Compatible with the 2004-2006 Pontiac GTO chassis
• Manufacturer Part Number: PED-424209

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models.

Restore original handling characteristics and suspension stability with this OE-style front sway bar end link from Omix. Designed as a direct-fit replacement for worn, bent, or snapped factory links, this component ensures your front sway bar maintains proper alignment and tension during cornering and off-road articulation. Each link is manufactured to precise tolerances for a bolt-on installation that requires no modification to the factory mounting points.

This unit is sold individually and fits both the left (driver) or right (passenger) side of the vehicle; two are required per front axle. The assembly comes complete with necessary bushings to refresh your front suspension hardware in one step.

• Position: Front (Left or Right)
• Fitment Type: Direct Replacement
• Replaces OE Number: 5364122
• Includes pre-installed rubber bushings
• Manufacturer Part Number: 18271.08
• Limited 5-Year Warranty

Fits Can-Am Maverick X3 models.

The King Shocks Rear Sway Bar Link Shock (MPN 20C001-402) replaces the standard rigid sway bar links with a specialized damping unit. This system is engineered to absorb high-frequency chatter and harsh impacts that rigid links typically transfer directly to the chassis, providing a more compliant ride without sacrificing the lateral stability provided by the sway bar. Each unit is custom-tuned to provide an optimal damping curve specifically for the Maverick X3 platform.

• Specifically tuned for Can-Am Maverick X3 rear suspension geometry
• Improves suspension articulation over uneven terrain
• Reduces harshness and feedback through the chassis
• Constructed with high-quality materials and spherical bearings for long-term durability
• Simple bolt-on replacement for factory rear sway bar links
• Manufacturer Part Number: 20C001-402

Fits select 1997-2007 Subaru Impreza GC8, RS, and WRX models.

Kartboy rear swaybar endlinks are engineered to replace the compliant factory units, providing a rigid connection between the sway bar and the rear suspension. By eliminating the deflection common in OEM plastic or thin-gauge steel links, these heavy-duty replacements ensure the sway bar reacts instantly to body roll, significantly improving cornering stability and predictable handling.

• Direct bolt-on replacement for factory rear endlinks
• Solid design eliminates flex to maximize sway bar effectiveness
• Provides crisper steering response and improved chassis feedback
• Durable construction built to withstand performance driving and track use
• Complete set for rear installation
• Manufacturer Part Number: KB-017-WRX-R

Ensure proper suspension geometry and noise-free operation with Kartboy Front Swaybar Endlink Spacers. Designed specifically for Subaru applications equipped with aftermarket front sway bars, these spacers (MPN: KB-017-WLS) allow you to correct the alignment between the endlink and the sway bar or control arm mounting points.

These spacers are essential when installing upgraded sway bars that differ in width from the factory unit. They help prevent endlink binding and ensure the hardware operates at the correct angle throughout the suspension travel, preserving the life of your bushings and improving response.

• Designed for use with aftermarket front sway bars
• Corrects endlink geometry and vertical alignment
• Helps prevent binding and suspension clunking
• Precision-machined for consistent tolerances
• Includes four (4) spacers
• Manufacturer Part Number: KB-017-WLS

Fits select 1997-2001 Subaru Impreza (GC8) and 2002-2007 Subaru WRX Wagon models.

Upgrade your vehicle's handling response with Kartboy Front Swaybar Endlinks. These components are designed to replace the flexible factory links, providing a more rigid connection between the front sway bar and the suspension. By reducing the delay in sway bar activation, these endlinks sharpen steering turn-in and improve chassis stability during cornering.

• Direct bolt-on replacement for factory front endlinks
• Designed to eliminate suspension flex and improve handling feel
• Durable construction suitable for spirited street and track use
• Includes required hardware and bushings for installation
• Manufacturer Part Number: KB-017-WAGON

Fits 2004-2007 Subaru WRX STI and 2004-2008 Subaru Forester XT.

Engineered to eliminate the deflection and lag associated with factory-equipped endlinks, these Kartboy rear sway bar endlinks provide a more direct connection between your sway bar and the control arms. By replacing the flexible OE components with rigid, CNC-machined units, you ensure that sway bar energy is transferred immediately during cornering, significantly sharpening turn-in and reducing body roll.

• Construction: CNC machined 6061-T6 aluminum for maximum rigidity and weight savings.
• Bushings: Specialized stiff urethane bushings to minimize compliance while maintaining durability.
• Hardware: Includes high-grade installation hardware for a direct bolt-on replacement.
• Design: Hand-crafted in the USA with a focus on long-term performance in enthusiast applications.
• Manufacturer Part Number: KB-017-STI-R

Fits select 2002-2014 Subaru WRX and WRX STi (Sedan), 2005-2012 Subaru Legacy GT, and Subaru Forester models.

Eliminate the flex and potential failure points of factory suspension components with Kartboy Front Swaybar Endlinks. Many OE endlinks use plastic bodies or thin metal rods that deflect under heavy cornering loads, especially when paired with stiffer aftermarket sway bars. Kartboy engineered these replacements to provide a rigid, direct connection between the control arm and the sway bar, ensuring immediate stabilizer bar activation and more predictable handling.

• Solid CNC-machined construction for maximum rigidity and durability
• Heavy-duty urethane bushings minimize deflection compared to soft factory rubber
• Direct bolt-on replacement for the original equipment front links
• Compatible with both factory and upgraded aftermarket sway bars
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: KB-017-FRONT

Fits 2015-2021 Subaru WRX and WRX STI.

Improve your vehicle's handling and suspension response with the Kartboy Front Sway Bar Endlinks. Designed to replace the flexible factory units, these endlinks provide a solid connection between the sway bar and the control arms, ensuring that your anti-roll bar begins working immediately during cornering rather than waiting for OEM plastic or rubber components to deflect.

Kartboy constructs these endlinks using CNC-machined 6061-T6 aluminum for maximum rigidity and weight savings. Each unit is equipped with high-durometer urethane bushings that offer a significant increase in stiffness over stock while maintaining long-term durability. These are a direct bolt-on replacement, engineered to withstand the increased loads of aftermarket sway bars and spirited driving.

• CNC-machined 6061-T6 aluminum construction
• High-durometer urethane bushings for reduced deflection
• Direct bolt-on installation using factory mounting points
• Includes 12mm hardware for a secure fit
• Hand-built in the USA
• Manufacturer Part Number: KB-017-F-12MM

Fits select 2008-2021 Subaru WRX, WRX STI, and BRZ, plus 2010-2012 Legacy GT models.

Sharpen your vehicle's handling and suspension response with Kartboy Rear Swaybar Endlinks (MPN: KB-017-08+REAR). These units are designed to replace the compliant factory links that often flex under load, causing a delay in swaybar engagement. By switching to a solid link, you eliminate deflection and ensure your rear swaybar—whether OEM or aftermarket—performs at its maximum potential during cornering.

• CNC machined from solid 6061-T6 aluminum for superior strength and rigidity
• Equipped with hand-poured 95-durometer urethane bushings for a precise feel
• Direct bolt-on replacement for the original equipment (OE) hardware
• Includes all necessary high-grade mounting hardware for a complete install
• Engineered and manufactured in the USA

Fits 1999-2004 Jeep Grand Cherokee WJ models including Laredo, Limited, Overland, Special Edition, and Sport with 0-3.5 inches of suspension lift.

Maximize your Jeep's off-road potential with JKS Quicker Disconnect sway bar links. These adjustable-length end links replace your factory units to provide a 100% bolt-on solution for increasing suspension travel. By utilizing quick-release pins, you can easily decouple your front sway bar at the trail head, gaining up to 30 percent more axle articulation for superior traction on uneven terrain.

Built for durability and ease of use, these links feature stainless steel tapered mounting posts and self-aligning bushings, allowing for effortless connection and disconnection even when parked on unlevel surfaces. The spherical bushings allow for unrestricted 360-degree rotation and up to 11 degrees of misalignment capability, ensuring silent operation and preventing binding during extreme wheel travel.

• Gain up to 30% more axle articulation by disconnecting the front sway bar
• Variable length design adapts to current and future suspension modifications
• Stainless steel tapered mounting posts and self-aligning bushings for easy operation
• Spherical bushings provide 360 degrees of rotation and 11 degrees of misalignment
• Integrated grease fittings for simple maintenance and silent performance
• Durable powder-coated finish and 100% bolt-on installation
• Manufactured in the USA; sold as a pair
• Manufacturer Part Number: JKS3100

Fits select 2007-2025 Jeep Wrangler JK and JL models including Rubicon, Sahara, Sport, Willys, and 4xe (2-door and 4-door Unlimited).

Proper sway bar geometry is critical for maintaining predictable handling after installing a suspension lift. These JKS Manufacturing rear adjustable sway bar links allow you to precisely set the sway bar operating angle, correcting the geometry on lifted Jeep Wranglers. By restoring the balance between the front and rear sway bars, these links ensure safer on-road driving and optimized suspension articulation off-road.

Engineered for durability and performance, these links feature tension-free rod ends that offer up to 45 degrees of mounting alignment. This flexibility reduces stress and premature wear on related suspension components. The variable length design provides the adjustability needed for various lift heights, while the special zinc plating ensures long-lasting corrosion resistance in harsh environments.

• Variable length design allows for precise sway bar operating angle adjustment
• Tension-free rod ends provide 45 degrees of mounting alignment to reduce component wear
• Corrects sway bar geometry on lifted vehicles for improved handling on and off-road
• Zinc plating provides superior corrosion resistance
• Compatible with Jeep Wrangler JK Right Hand Drive (RHD) models
• Manufacturer Part Number: JKS2943

Fits 2012-2018 Jeep Wrangler JK Rubicon and Unlimited Rubicon with 2.5" to 6" of suspension lift.

JKS Manufacturing adjustable front sway bar links provide a heavy-duty, fixed-mount solution for Rubicon owners who require the strength of JKS engineering without the manual disconnect feature. These links are the non-disconnecting counterparts to the Quicker Disconnect series, specifically designed to function with the factory electronic sway bar system. By utilizing high-misalignment polyurethane bushings, these links allow the suspension to reach its full travel potential when the sway bar is electronically disengaged.

Built for long-term durability, these components are fully greaseable and serviceable, ensuring quiet operation and a long service life in harsh off-road conditions. They are also the ideal choice for vehicles converting from a factory electronic disconnect to a manual setup using the JKS 9500 Cable Conversion Kit.

• Fits 2.5" to 6" lift heights
• Fixed-mount (non-disconnecting) design
• Fully adjustable, greaseable, and serviceable
• High-misalignment polyurethane bushings for maximum articulation
• Compatible with OEM Rubicon electronic sway bar disconnect
• Manufacturer Part Number: JKS2035

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited JK (2.5-6.0" Lift).

JKS Quicker Disconnects provide a significant upgrade for off-road performance, allowing you to gain up to 30% more axle articulation by quickly decoupling the front sway bar. These links feature a variable-length design to adapt to your specific lift height and future suspension modifications. The 100% bolt-on installation attaches directly to the factory sway bar and axle housing using stainless steel tapered mounting posts. For longevity and quiet operation, these links are equipped with greaseable spherical bushings that allow for 360 degrees of rotation and up to 11 degrees of misalignment.

• Gain up to 30% more axle articulation for improved off-road traction
• Stainless steel tapered mounting posts and self-aligning bushings for easy connection on uneven ground
• Spherical bushings provide unrestricted 360-degree rotation and 11-degree misalignment
• Integrated grease fittings allow for easy lubrication and silent operation
• Adjustable length design accommodates 2.5-inch to 6.0-inch suspension lifts
• Durable powder-coated finish for corrosion resistance
• Sold as a pair; made in the USA
• Manufacturer Part Number: JKS2034

Fits select 2018-2025 Jeep Wrangler JL and 2020-2023 Jeep Gladiator JT models (including 4xe and Rubicon 392) with 2.5" to 6.0" of suspension lift.

Maximize your Jeep's off-road performance with JKS Quicker Disconnects. By decoupling the front sway bar, you can gain up to 30% more axle articulation, allowing your tires to maintain contact on uneven terrain. These links feature a variable-length design to ensure correct sway bar geometry for your specific lift height and allow for future suspension adjustments. When you are ready to head home, the quick-release pins and self-aligning bushings make reconnecting the sway bar straightforward even on unlevel ground.

• Precision Engineering: Stainless steel tapered mounting posts and spherical bushings provide 360 degrees of rotation and 11 degrees of misalignment capability.
• Complete Kit: Includes a pair of frame-mounted retention brackets to securely stow the links and sway bar while disconnected, preventing damage to other components.
• Durable Construction: Heavy-duty links are powder-coated for corrosion resistance and feature integrated grease fittings for easy lubrication and silent operation.
• Direct Fit: 100% bolt-on installation to factory sway bar and axle housing locations.
• Manufacturer Part Number: JKS2033
• Sold as a pair.

Fits select 1984-2006 Jeep Cherokee, Comanche, Grand Cherokee, and Wrangler models with 2.5 to 6 inches of suspension lift.

Maximize your Jeep's off-road potential with JKS Manufacturing Quicker Disconnects. These adjustable-length sway bar links allow you to decouple the front sway bar in seconds via quick-release pins, providing up to 30% more axle articulation on uneven terrain. The 100% bolt-on design features stainless steel tapered mounting posts and self-aligning bushings, allowing for easy operation even on unlevel surfaces.

• Gain up to 30% more axle articulation by disconnecting the front sway bar
• Variable length design adapts to 2.5-6 inch lifts and future modifications
• Stainless tapered mounting posts and self-aligning bushings for easy connection on uneven ground
• Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment
• Convenient grease fittings ensure smooth, silent operation and easy maintenance
• Durable powder-coated finish built to withstand harsh off-road environments
• Sold as a pair; includes all necessary mounting hardware
• Manufacturer Part Number: JKS2001

Fits 2010+ Hyundai Genesis Coupe models.

The ISR Performance Front Sway Bar End Links are engineered to replace the factory components which are prone to flexing or wearing out under spirited driving conditions. These end links are a critical upgrade for any Genesis Coupe owner looking to restore or improve front-end suspension response. By providing a more rigid connection between the sway bar and the strut, these units ensure that your stabilizer bar can effectively control body roll during cornering.

• Direct-fit replacement for the factory front end links
• Designed to maintain proper sway bar geometry for improved handling
• Heavy-duty construction to withstand higher suspension loads than OE parts
• Compatible with both factory and aftermarket sway bars
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: IS-SBL-GN

Whether you are maintaining a daily driver or preparing for track use, these ISR Performance links provide the durability and precision required to keep your suspension system performing at its peak.

Fits 2020-2022 Jeep Gladiator JT (All Trims).

The ICON Billet Rear Sway Bar Link Kit is designed to optimize the suspension geometry and handling of your Jeep Gladiator. These links are a critical upgrade for vehicles equipped with ICON rear shocks and springs, as they prevent sway bar binding as the suspension approaches full droop. CNC-machined from billet aluminum, these links offer superior strength and a premium finish with laser-etched ICON logos.

By replacing factory rubber bushings with high-quality FK rod end bearings, this kit eliminates the deflection that causes vague handling characteristics. This allows for maximum articulation and a more connected feel through the steering and chassis. For precision setup, these links are adjustable while installed on the vehicle, allowing you to fine-tune the sway bar angle for your specific ride height or cargo load.

• CNC-machined billet aluminum construction for maximum durability
• High-quality FK rod end bearings eliminate bushing deflection
• Prevents sway bar binding at full suspension droop
• Adjustable while installed on the vehicle to fine-tune sway bar angle
• Laser-etched ICON logos and hardware included
• Manufacturer Part Number: 22070

Fits 2018-2023 Jeep Wrangler and 2020-2023 Jeep Gladiator models.

The ICON Billet Aluminum Front Sway Bar Link Kit (MPN: 22061) is engineered to restore proper sway bar geometry on vehicles equipped with 2.5 inches of lift. CNC-machined from high-strength billet aluminum, these links feature a design that is adjustable while mounted on the vehicle, allowing for precise fine-tuning of the sway bar angle without the need for repeated removal and installation.

To enhance handling response and eliminate the vague feel associated with factory components, this kit utilizes premium FK rod end bearings. These rod ends replace soft OEM bushings to minimize deflection and allow for maximum suspension articulation without binding during off-road use.

• Corrects sway bar angle for vehicles with 2.5 inches of lift
• On-vehicle adjustability for precise sway bar alignment
• CNC-machined billet aluminum construction for superior durability
• Premium FK rod end bearings eliminate bushing deflection
• Laser-etched ICON logos for a clean, finished appearance
• Replaces factory front sway bar links

Fits 1997-2017 Chevrolet Corvette C5, C6, and C7 models.

The Hotchkis Front and Rear Sway Bar Endlink Set (2585) is a vital upgrade for Corvette owners looking to eliminate the deflection and premature wear common with factory links. These high-strength components provide a rigid, direct connection between the sway bars and the control arms, ensuring that bar rate is applied immediately during cornering. This improved transfer of force results in sharper turn-in and more predictable handling characteristics on both the street and the track.

• Heavy-duty construction designed to withstand increased loads from aftermarket sway bars
• Direct bolt-on replacement for factory front and rear endlinks
• Reduces suspension compliance for improved steering response
• Specifically engineered for the C5, C6, and C7 chassis
• Manufacturer Part Number: 2585

Fits select 2007-2012 BMW 328i, 335i, 335d, and 335i xDrive (E90/E92).

The Hotchkis Sport Suspension Rear Sport End Link Kit is engineered to resolve the common failure point of factory end links when paired with stiffer aftermarket sway bars. Specifically designed for the BMW E90 and E92 chassis, these heavy-duty links provide the strength and articulation necessary to handle the increased loads of high-performance suspension setups.

Each link features a hybrid design, utilizing high-articulation rod ends to allow for a maximum range of motion without binding, paired with quiet, greasable polyurethane bushings to maintain street-driven comfort. These end links are height-adjustable, allowing you to eliminate sway bar preload and optimize suspension geometry for a more responsive handling feel.

• Specifically designed for the BMW E90 and E92 3 Series chassis
• High-articulation rod ends provide maximum range of motion
• Quiet, greasable polyurethane bushings for durability and street comfort
• Height adjustable to ensure optimum fitment and zero preload
• Rear Length Range: 6.375 in. +/- 0.5 in.
• Increases sway bar effectiveness and overall link strength
• Manufacturer Part Number: 25834R

Fits select 2007-2012 BMW 128i, 135i, 328i, 335d, 335i, and 335i xDrive.

The Hotchkis Sport Suspension 25834F Front End Link Kit is engineered to address the common failure point of factory end links when paired with stiffer aftermarket sway bars. This kit replaces the lightweight OE components with high-strength, adjustable links designed to maintain suspension integrity under increased cornering loads.

Constructed with high-articulation rod ends, these links provide a maximum range of motion without binding. To ensure street-friendly performance, they utilize quiet, greasable polyurethane bushings that offer a significant upgrade in durability while maintaining ride comfort. The adjustable design allows you to precisely set the sway bar orientation and eliminate preload, which is critical for vehicles with modified ride heights.

• Manufacturer Part Number: 25834F
• Front Length Range: 11.5 in. +/- 0.5 in.
• High-articulation rod ends for maximum range of motion
• Quiet, greasable polyurethane bushings for improved comfort and serviceability
• Height-adjustable design for optimum fit and preload elimination
• Increases sway bar effectiveness and overall link strength