Fits select 2001-2004 Chevrolet Silverado and GMC Sierra 2500 HD/3500 models (6.6L Duramax).

This Fleece Performance replacement outer injector connector pigtail is engineered to restore reliable electrical connections on the 6.6L LB7 Duramax engine. This connector serves as the external interface for the engine harness, mating directly to the inner injector harness (GM 97207227). Because these engines utilize four of these connectors, they are a common point of failure due to heat cycling and vibration.

Each pigtail is produced using a fully automated manufacturing process, including precision wire cutting and terminal crimping, to ensure exact tolerances and long-term durability. Whether you are repairing a brittle factory connector or performing a complete harness overhaul, these pigtails provide the OE-level fitment required to keep your truck on the road.

• Includes 6-inch pigtail for flexible installation
• Mates to inner injector harness (GM 97207227)
• Four (4) connectors required per engine
• Automated terminal crimping for maximum conductivity
• Manufacturer Part Number: FPE-HAR-DMAX-LB7-INJ-PT

Fits select 2011-2016 Chevrolet Silverado and GMC Sierra 2500/3500 HD models (LML Duramax).

The Fleece Performance fan extension harness provides a reliable solution for repairing broken or damaged wiring without the high cost of replacing the entire cooling fan assembly. This harness mounts directly to the fan assembly and provides a secure connection between the fan and the chassis wiring harness. To ensure OE-level reliability, each harness is produced using fully automated wire cutting and terminal crimping processes for precise electrical conductivity and durability.

• Manufacturer Part Number: FPE-HAR-DMAX-FAN-LML
• Direct replacement for damaged fan assembly wiring
• Fits cooling fan clutch part numbers: 15-40580, 15-40513, 84144840, 25838900, 1540513, 84166745, 23134137
• High-quality automated terminal crimps for long service life
• Eliminates the need to buy a complete new fan assembly

Fits select 2017-2019 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD trucks equipped with the 6.6L L5P Duramax diesel engine.

The Fleece Performance L5P Fan Extension Harness provides a cost-effective solution for repairing a damaged or broken harness without the need to replace the entire cooling fan assembly. This extension mounts directly to the fan assembly and serves as the critical link between the fan clutch and the vehicle's chassis harness. By replacing only the failed electrical segment, you reduce downtime and avoid the high cost of redundant mechanical components.

To ensure long-term reliability under the hood, these harnesses are produced in-house using a fully automated manufacturing process that includes precision wire cutting and terminal crimping. This technical approach guarantees consistent connection integrity and resistance to vibration-induced failure.

• Manufacturer Part Number: FPE-HAR-DMAX-FAN-L5P
• Compatible Fan Clutch Part Numbers: 15-40577, 84013368
• Construction: Automated terminal crimping for maximum conductivity
• Installation: Direct fit to factory fan assembly mounting points

Fits 1998-2002 Dodge Ram 2500 and 3500 (5.9L).

Restore a reliable electrical connection to your engine sensors with the Fleece Performance Camshaft and Crankshaft Position Sensor Pigtail. This 6-inch pigtail harness is designed to replace brittle, cracked, or corroded factory connectors common on high-mileage VP44-equipped Cummins engines. Each harness is manufactured in-house using fully automated wire cutting and terminal crimping processes to ensure precise tolerances and long-term durability in harsh engine bay conditions.

• Includes heat-sealable butt-style connectors for a moisture-resistant installation
• 6-inch pigtail leads for easy integration into the existing engine loom
• Precision-crimped terminals for maximum signal integrity
• Directly replaces Cummins part number: 3823254
• Manufacturer Part Number: FPE-HAR-CUMM-VP-CC-PT

Fits 2013-2022 Ram 2500 and 3500 trucks equipped with the Holset HE300VG turbocharger actuator.

This replacement connector from Fleece Performance is designed to repair damaged or corroded wiring for the Variable Geometry Turbocharger (VGT) actuator. A compromised connector often leads to intermittent communication issues or total actuator failure, throwing diagnostic trouble codes (DTCs) and putting the truck into limp mode. This 6-inch pigtail provides a reliable, direct-fit solution to restore proper electrical connectivity to your turbo system.

Each pigtail is produced in-house using a fully automated manufacturing process. This includes precision wire cutting and terminal crimping to meet strict tolerances, ensuring a more durable connection than manual hand-crimping. The heavy-duty 6" leads provide ample length for splicing into the factory wiring harness.

• Fits Holset HE300VE and HE300VG turbocharger actuators
• 6-inch wire lead length
• Automated terminal crimping for maximum reliability
• Replaces damaged or melted OE actuator connectors
• Manufacturer Part Number: FPE-HAR-CUMM-VGT-PT

Fits select 2003-2007 Dodge Ram 2500 and 3500 (5.9L).

Maintain a reliable connection to your engine's manifold absolute pressure sensor with the Fleece Performance MAP sensor pigtail. Over time, factory connectors on the 5.9L Cummins can become brittle or lose their locking tabs due to engine heat and vibration, resulting in intermittent signals or check engine lights. This pigtail provides a durable repair solution by allowing you to splice into the factory harness with high-quality wiring.

• Direct replacement for Mopar part number 5143782AA
• Features 6-inch wire leads for flexible installation and routing
• Restores secure locking connection to the MAP sensor
• Designed specifically for 2003-2007 5.9L Cummins applications
• Manufacturer Part Number: FPE-HAR-CUMM-MAP-0307-PT

Fits 2007-2018 Dodge and Ram 2500 and 3500 trucks (6.7L Cummins).

This Fleece Performance replacement MAF sensor pigtail is designed to provide a reliable, high-quality solution for repairing damaged or corroded electrical connectors. Engineered specifically for the 6.7L Cummins engine platform and compatible with HE400VG/HE451VE turbochargers, this connector helps restore proper communication between your Mass Air Flow sensor and the ECU.

To ensure maximum durability and a consistent connection, each pigtail is produced in-house using a fully automated wire cutting and terminal crimping process. This precise manufacturing eliminates the common failures associated with hand-crimped repairs, getting your truck back on the road with professional-grade wiring.

• Manufacturer Part Number: FPE-HAR-CUMM-MAF-PT
• Pigtail Length: 6 inches
• Compatible with HE400VG and HE451VE turbochargers
• Fully automated wire cutting and terminal crimping
• Direct replacement for OE MAF sensor connectors

Fits select 2007-2022 Dodge and Ram 2500/3500 trucks (6.7L Cummins).

This Fleece Performance replacement connector with a 6-inch pigtail provides a reliable, cost-effective solution for repairing damaged or corroded sensor connections on your 6.7L Cummins engine. Rather than replacing a complete engine wiring harness, this pigtail allows you to restore signal integrity by splicing into the factory wiring with high-quality leads.

• 6-inch wire lead length for flexible installation
• Engineered to replace worn or broken factory sensor connectors
• Application (2013-2022 Ram 2500/3500): Air Temperature Sensor
• Application (2007.5-2019 Ram 2500/3500): Exhaust Gas Temperature (EGT) Sensor
• Cross-reference number: 2872858
• Manufacturer Part Number: FPE-HAR-CUMM-IAT-PT

Fits 2000-2018 Dodge and Ram 2500/3500 trucks with 5.9L or 6.7L Cummins engines.

This Fleece Performance replacement electrical connector is designed to repair damaged, brittle, or corroded wiring for the fuel heater or turbo wastegate solenoid. Using a fully automated wire cutting and terminal crimping process, Fleece ensures high-precision tolerances for a reliable connection that stands up to engine bay heat and vibration. This pigtail allows for a professional-grade repair without the expense of replacing the entire engine wiring harness.

• Replaces Cummins Part Number: 5572791
• Application: Fuel heater (2000-2007 5.9L and 2013-2018 6.7L)
• Application: Turbo wastegate solenoid (2004.5-2007 5.9L)
• Includes 6-inch pigtail leads for flexible installation
• Includes heat-sealable butt-style connectors for a moisture-resistant seal
• Manufacturer Part Number: FPE-HAR-CUMM-FH-PT

Fits 2007-2018 Dodge and Ram 2500 and 3500 trucks (6.7L).

This Fleece Performance replacement connector is engineered to restore electrical integrity to your Cummins 6.7L, ISL, or ISX engine systems. Designed for use as a crankshaft position sensor extension or for adapting to ISL/ISX exhaust gas valves (4309416), this harness provides a reliable solution for damaged OE wiring. Every harness is produced in-house using fully automated wire cutting and terminal crimping to ensure maximum precision and connection strength.

• 6-inch wire pigtail for flexible installation
• Includes heat-sealable butt-style connectors for a weather-tight finish
• Automated manufacturing ensures consistent terminal crimp quality
• Versatile application for 6.7L Cummins crankshaft sensors and EGR valve adaptations
• Manufacturer Part Number: FPE-HAR-CUMM-EGR-PT

Fits select 2013-2022 Ram 2500 and 3500 trucks (6.7L).

When a serpentine belt fails on a 6.7L Cummins, it often takes out the cooling fan clutch wiring in the process. The Fleece Performance cooling fan pigtail kit provides a complete solution for restoring that connection without replacing the entire harness or the fan clutch itself. This kit includes both sides of the connector with 6-inch flying leads, allowing you to repair both the engine harness side and the fan clutch side if necessary.

These pigtails are manufactured in-house using fully automated wire cutting and terminal crimping processes. This ensures consistent terminal tension and secure connections that stand up to the heat and vibration of the engine bay, getting your truck back on the road with OE-level reliability.

• Manufacturer Part Number: FPE-HAR-CUMM-CF-1322
• Lead Length: 6 inches
• Application: 2013-2022 RAM 2500/3500 with 6.7L Cummins
• Construction: Automated crimps and high-quality flying leads
• In the Box: Both sides of the cooling fan connector with pigtails

Fits select 2007-2018 Dodge and Ram 2500 and 3500 (6.7L).

The Fleece Performance Crankcase Pressure Sensor Pigtail provides a high-quality solution for repairing damaged or corroded factory connectors on your 6.7L Cummins engine. This replacement connector allows you to restore proper sensor communication without the expense or labor of replacing the entire engine wiring harness.

To ensure long-term reliability, each pigtail is manufactured in-house using a fully automated process for wire cutting and terminal crimping. This precision ensures consistent terminal tension and electrical integrity. The 6-inch wiring lead offers ample length for easy splicing, and the included heat-sealable butt connectors provide a moisture-resistant, durable connection.

• 6-inch pigtail lead for versatile installation
• Includes heat-sealable butt-style connectors for a weather-tight seal
• Automated manufacturing ensures precise wire cuts and terminal crimps
• Direct replacement for the factory crankcase pressure sensor connector
• Manufacturer Part Number: FPE-HAR-CUMM-CCP-PT

Fits 2003-2018 Dodge and Ram 2500 and 3500 trucks (5.9L).

Restore the integrity of your engine's electrical system with the Fleece Performance Crankshaft and Camshaft Sensor Pigtail. Factory connectors often become brittle and fail after years of exposure to engine heat and vibration, leading to intermittent signals or sensor faults. This 4.5-inch pigtail offers a robust solution for repairing damaged wiring to ensure your Cummins engine receives accurate timing and position data.

The kit is designed for a durable repair, featuring high-quality wiring and included heat-sealable butt-style connectors. These connectors provide a weather-tight seal to protect the splice from moisture and corrosion, keeping you on the road longer.

• Pigtail Length: 4.5 inches
• Includes heat-sealable butt-style connectors
• Replaces Mopar Part Number: 5014010AB
• Compatible with Mopar Sensor Part Number: 2872277
• Manufacturer Part Number: FPE-HAR-CUMM-CC-PT

Fits select 2007-2012 Dodge and Ram 2500/3500 models (6.7L).

The Fleece Performance VGT Actuator Harness Adapter (FPE-34425) allows owners of 2007.5-2012 6.7L Cummins trucks to install the updated, more reliable turbo actuator used on 2013 and newer Variable Geometry Turbochargers (VGT). This plug-and-play solution simplifies turbocharger maintenance and upgrades by bridging the electrical connection between the factory chassis harness and the revised actuator design without the need for splicing.

• Enables use of 2013+ VGT actuators on 2007-2012 6.7L Cummins engines
• Direct replacement for Cummins P/N 5347703
• High-quality automotive-grade connectors for a secure, weather-sealed fit
• Durable wiring loom protects against heat and vibration
• Manufacturer Part Number: FPE-34425

The AEM 30-3443 is a professional-grade replacement main wiring harness designed specifically for the X-Series Fluid Temperature Gauge (MPN 30-0302). This harness provides a reliable electrical pathway for critical fluid monitoring, ensuring accurate data delivery from your sensor to the gauge interface.

• Direct replacement harness for AEM X-Series Fluid Temperature Gauge (30-0302)
• Extended loom length provides flexibility for routing through firewalls and across large engine bays
• Color-coded wiring simplifies installation and reduces the risk of incorrect pinning
• Integrated quick-connect terminals for secure, tool-less connectivity to the gauge housing
• Durable construction designed to withstand the heat and vibration of automotive environments
• Manufacturer Part Number: 30-3443

The XK Glow XKmax Splitter Wire (MX-WIRE-SPLIT) is a specialized Y-adapter designed to expand the capacity of your XKmax LED lighting system. This component allows you to split a single controller output into two branches, enabling the installation of additional light pods or strips while maintaining a clean, organized wiring harness.

Engineered for the rigors of automotive and powersports environments, this splitter features the specific plug-and-play connectors required for the XKmax series. The secure snap-lock design ensures a weather-resistant connection that resists vibration and moisture, making it ideal for underglow or interior accent lighting setups.

• Direct compatibility with XK Glow XKmax series controllers and accessories
• Splits one XKmax output into two female connectors
• Plug-and-play design for fast, secure installation
• Weather-resistant connectors for exterior or interior use
• Manufacturer Part Number: MX-WIRE-SPLIT

Fits select 2019-2026 Chevrolet Silverado 1500, GMC Sierra 1500, and Ram 1500 models.

The Westin Parking Sensor Harness Extension is a specialized solution for vehicles equipped with grille guards that would otherwise obstruct factory proximity sensors. This extension allows you to relocate your Original Equipment (OE) parking sensors to the grille guard uprights, ensuring that your vehicle's safety and park-assist systems remain functional and accurate after installation.

• Relocates OE parking sensors to maintain proper alignment and detection
• Mounts directly to grille guard uprights (requires drilling)
• Constructed with 20 gauge pigtails and durable connectors
• Includes all necessary mounting hardware
• U.S. Patent No. D745,422 S
• Sold as a set of 2
• Manufacturer Part Number: 40-0048S

The Walbro 94-686 Fuel Pump Wiring Harness is a genuine TI Automotive installation accessory engineered to provide a secure and reliable electrical connection for high-performance fuel delivery systems. Designed to integrate seamlessly with TI Automotive pumps and modules, this harness ensures consistent voltage delivery, which is critical for maintaining stable fuel pressure and pump longevity.

Whether you are performing a standard replacement or a custom fuel system build, this harness provides a professional-grade solution for interfacing with the vehicle's electrical supply. Using the correct pigtail and connector prevents voltage drops and heat buildup often associated with universal or undersized wiring.

• Genuine TI Automotive component designed for Walbro fuel systems
• Ensures reliable electrical contact and power delivery
• Ideal for custom installations and high-draw performance pumps
• Manufacturer Part Number: 94-686

Ensure a secure and reliable electrical connection for your high-performance fuel system with the TI Automotive Walbro GSS Series Fuel Pump Replacement Wire Harness (MPN 94-615). Over time, OE wiring and connectors can become brittle, corroded, or damaged due to heat and environmental exposure. This replacement pigtail harness provides a clean, professional solution for restoring power to your fuel pump during a fresh installation or maintenance.

This genuine TI Automotive component is engineered specifically for GSS series fuel pumps, featuring a durable connector housing and automotive-grade wiring designed to handle the electrical load of high-output fuel modules. It is an essential accessory for ensuring consistent voltage delivery to the pump, preventing connection-related performance drops.

• Direct replacement pigtail for Walbro GSS series fuel pump connectors
• Precision-molded connector ensures a secure, click-lock fit
• High-quality insulated wire leads ready for splicing into the vehicle harness
• Genuine TI Automotive installation accessory (MPN: 94-615)

The Walbro E85 Fuel Pump Plug (MPN: 000107694/AA) is a critical component for ensuring reliable electrical connectivity in high-performance fuel systems. This genuine connector is specifically engineered to interface with Walbro’s E85-compatible high-pressure turbine pumps, providing a secure connection capable of handling the significant current draw required for high-volume fuel delivery.

• Genuine Walbro/TI Automotive electrical component
• Engineered for E85-compatible high-output fuel pump series
• High-current terminal design helps prevent voltage drop and connector melting
• Constructed with fuel-resistant materials for durability in harsh environments
• Manufacturer Part Number: 000107694/AA

The Radium Engineering 17-inch Fuel Pump Connector Harness is specifically designed to provide a secure and reliable electrical interface for Porsche vehicles utilizing Walbro E85-compatible fuel pumps. This 17-inch harness simplifies the integration of high-performance pumps into the factory fuel system, ensuring consistent power delivery for demanding applications.

• Specifically designed for Porsche applications with Walbro E85 fuel pumps
• 17-inch length (432mm) allows for flexible routing within the fuel tank or surge tank assembly
• Optimized for high-current draw associated with performance E85 pumps
• Durable insulation and connector housing for long-term submersion in fuel
• Manufacturer Part Number: 17-0054

Simplify your aftermarket horn installation with the TurboXS Hella Horn Wiring Harness (WS15-HHWH). Engineered specifically for the 2015-2021 Subaru WRX STI, this harness provides a direct plug-and-play solution for mounting Hella Supertones, Sharptones, or similar high-output horns without cutting, stripping, or splicing your factory electrical system.

• True plug-and-play design connects directly to OEM horn triggers
• Compatible with Hella Supertone and Sharptone dual-horn kits
• Pre-terminated connectors for a secure, reliable electrical connection
• Maintains factory circuit integrity while ensuring consistent power delivery to high-decibel horns
• Includes all required wiring and connectors for a complete dual-horn configuration
• Manufacturer Part Number: WS15-HHWH

Fits all 2015-2021 Subaru WRX STI models, including Base, Limited, Launch Edition, S209, Series.HyperBlue, and Type RA.

Fits 2008-2014 Subaru WRX and 2008-2021 Subaru STI models.

Transitioning your Subaru to a speed density setup is a necessary step for high-performance builds where the factory Mass Air Flow (MAF) sensor becomes a restriction or reaches its scaling limit. This Torque Solution Plug-and-Play (PNP) Speed Density Kit facilitates a clean, reliable conversion by utilizing high-quality automotive-grade connectors that bridge the factory harness to your speed density sensors without the need for cutting, splicing, or pinning wires.

This specific kit includes a durable stainless steel weld-on bung, allowing for secure and leak-free mounting of the intake air temperature (IAT) sensor. By eliminating the MAF sensor's dependency for load calculation, tuners can achieve more consistent fueling and driveability on forced induction setups running higher boost levels.

• Direct plug-and-play installation into factory harness
• Includes stainless steel weld-on bung
• Eliminates MAF sensor intake restrictions
• Ideal for high-horsepower Subaru builds
• Manufacturer Part Number: TS-WH-499PS

Fits 2008-2014 Subaru WRX and 2008-2021 Subaru STI models.

Transition your Subaru to a more reliable and precise tuning platform with the Torque Solution PNP Speed Density Kit. For high-performance builds where Mass Air Flow (MAF) sensors often become a bottleneck or hit scaling limits, this kit enables the ECU to calculate fueling based on Manifold Absolute Pressure (MAP) and Intake Air Temperature (IAT). This results in improved drivability and more consistent tuning for vehicles equipped with larger turbochargers or high-boost setups.

The Torque Solution kit features a true plug-and-play (PNP) design, allowing for a clean installation without any cutting, pinning, or splicing into the factory wiring harness. Each harness is constructed with high-quality loom and OEM-style connectors to ensure a secure, weather-resistant connection that withstands the heat of the engine bay.

• Direct plug-and-play installation for a clean, reversible setup
• Eliminates MAF sensor intake restrictions
• Provides more accurate fueling data for high-boost applications
• Utilizes high-quality wiring and factory-style connectors
• Manufacturer Part Number: TS-WH-499PA

Fits 2008-2014 Subaru WRX and 2008-2021 Subaru STI models.

The Torque Solution Plug and Play (PNP) Speed Density Adapter Harness provides a seamless solution for transitioning your Subaru from a factory Mass Air Flow (MAF) based setup to a Speed Density tuning configuration. This adapter eliminates the need for cutting, splicing, or pinning the factory engine loom, ensuring a reliable electrical connection while preserving the integrity of your original wiring harness.

Built with high-quality wiring and OEM-style connectors, this harness is designed to withstand the heat and vibration of the engine bay. It is a critical component for high-performance builds where the factory MAF sensor becomes a bottleneck or when custom intake piping requires the relocation of intake air temperature (IAT) and manifold absolute pressure (MAP) signals.

• Enables Speed Density conversion without permanent harness modifications
• True plug-and-play installation for a clean, professional finish
• High-quality, weather-sealed connectors for long-term reliability
• Retains factory wiring integrity for easy reversal to stock
• Manufacturer Part Number: TS-WH-499

The Torque Solution PNP Speed Density Kit provides a seamless way to transition your Subaru from a Mass Air Flow (MAF) based system to a Manifold Absolute Pressure (MAP) based tuning setup. Fits select 2002-2007 Subaru WRX and STI, as well as 2005-2012 Forester XT and Legacy GT models. This conversion is essential for high-horsepower builds where high-volume intake plumbing or atmospheric blow-off valves would otherwise cause driveability issues with a standard MAF sensor.

• Plug and Play Wiring: Eliminates the need for tedious wire splicing by using high-quality connectors that interface directly with the factory harness.
• Stainless Steel Bung: Includes a weld-on stainless bung for secure sensor mounting in your charge pipe or intake manifold.
• Reliable Connectivity: Built with automotive-grade materials designed to withstand the heat and vibration of the engine bay.
• Manufacturer Part Number: TS-WH-497PS

By utilizing speed density, tuners can achieve more consistent air-fuel ratios regardless of intake pipe diameter or turbulence. This kit includes the necessary harness and the stainless steel sensor bung required for a professional installation.

Fits select 2002-2007 Subaru WRX and STI, and 2005-2012 Forester XT and Legacy GT.

The Torque Solution PNP Speed Density Kit is designed to facilitate a clean and reliable transition from MAF-based engine management to a Speed Density setup. This is a critical upgrade for high-boost applications or rotated turbo configurations where the factory Mass Air Flow sensor becomes a bottleneck or experiences instability due to turbulence. By utilizing a plug-and-play wiring harness, this kit eliminates the need for cutting or splicing into your factory loom, maintaining electrical integrity and allowing for an easier install.

This kit specifically includes an aluminum weld-on bung for the Intake Air Temperature (IAT) sensor, providing a secure, leak-free mounting point on your intercooler piping. Whether you are prepping for a precision tune or cleaning up your engine bay, this speed density solution provides the accuracy and reliability required for performance engine management.

• Direct plug-and-play (PNP) wiring harness for a seamless installation
• Includes high-quality aluminum weld-on bung for IAT sensor placement
• Enables removal of restrictive or unstable MAF sensors in favor of MAP-based tuning
• Durable connectors and wiring designed for the automotive environment
• Manufacturer Part Number: TS-WH-497PA

Fits 2002-2007 Subaru WRX and STI, and 2005-2012 Legacy GT.

The Torque Solution PNP Speed Density Adapter Harness (MPN: TS-WH-497) simplifies the transition from Mass Air Flow (MAF) to Speed Density tuning on your turbocharged Subaru. This plug-and-play solution is essential for high-horsepower builds where the factory MAF sensor becomes a bottleneck or reaches its measurement limit. By utilizing this harness, you can integrate the necessary sensors for a speed density setup without cutting, splicing, or permanently altering your factory engine loom.

• Direct plug-and-play installation for a clean, professional finish
• Eliminates the need for wire soldering or crimping
• High-quality connectors and wiring for consistent signal integrity
• Allows for easy reversal back to factory MAF if needed
• Manufacturer Part Number: TS-WH-497

Designed for the Nissan GT-R R35, the Torque Solution MAP Sensor Adapter Harness provides a reliable, plug-and-play solution for integrating upgraded MAP sensors into your vehicle's factory electronics. This harness is essential for tuners and enthusiasts looking to run higher boost levels that exceed the factory sensor's range without compromising the electrical integrity of the original engine loom.

• Direct fit for Nissan GT-R R35 models
• Plug-and-play installation eliminates the need for cutting or splicing factory wires
• Constructed with high-quality connectors for a secure, vibration-resistant connection
• Maintains clean electrical signals for accurate ECU boost pressure readings
• Manufacturer Part Number: TS-GTR-627H

The Torque Solution Fast Response SD IAT Sensor Kit is an essential upgrade for vehicles running a Speed Density (SD) tuning setup. Standard intake air temperature sensors often feature a closed-element design that reacts slowly to temperature fluctuations or suffers from heat soak. This GM-style open-element sensor is engineered for rapid data feedback, allowing your ECU to make precise fueling and timing adjustments based on real-time intake temperatures.

This comprehensive kit includes everything needed to relocate or add an IAT sensor to your charge pipe or intake manifold. The included weld-on bung is constructed from high-quality stainless steel for durability and corrosion resistance, ensuring a leak-free seal after installation.

• Part Number: TS-ES-IAT-GMPS
• Sensor Type: Fast-response GM-style open element IAT
• Bung Material: 304 Stainless Steel
• Wiring: 2-wire pigtail harness included for easy integration
• Application: Ideal for Speed Density conversions and forced induction applications

Included Hardware: (1) Fast Response IAT Sensor, (1) Wiring Pigtail, (1) Stainless Steel Weld Bung.