Xpedition XP5 interiors are EXTREMELY noisy. DEI’s new Sound Control kit significantly reduces engine noise & vibration, delivering a quieter, more comfortable cabin on every ride. This comprehensive kit features a clean factory-finished look, and is built from durable, high-quality materials. Backed by DEI’s trusted quality & performance and proudly made in the USA.Cabin RoofDEI D-Mat is precision CNC-cut to fit seamlessly inside the front and rear headliners, delivering effective sound deadening and thermal insulation across the entire roof area.

This Part Fits:

New Black Floor and Tunnel Shield solves the problem of blocking engine and exhaust heat while wanting a great, flexible, black finish. With a proprietary high temperature black coating, Black Floor and Tunnel Shield controls heat from getting into interiors and protects components from damage. Aggressive adhesive backing makes installation easy. Flexible - easily shapes to firewalls, trans tunnels, floors, and more. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Proprietary high temperature black coating Wind and water will not affect adhesive Minimum clearance required, only 3/16 in. thick Easily shape, trim, peel and stick Aggressive self-adhesive backing DO NOT apply directly to exhaust components. Bending in a metal break or making sharp bends may crack the black coating. This will not change the performance of the product.

• Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
• Serves As A Barrier To Unwanted Road/Tire And Engine Noise
• Aggressive Self-Adhesive Backing Holds Past 450Degrees F
• Withstands Direct High Temperatures Up To 1750Degrees
• Blocks Radiant Heat From Entering Driver Compartment
• Adheres To Almost Any Surface/Material/Fiberglass
• Minimum Clearance Required Only 3/16 in. Thick
• Easy To Form To Shapes And Contours
• Constructed From 10 Mil Aluminum
• Peel and stick adhesive backing
• Just Trim Peel And Stick

New Black Floor and Tunnel Shield solves the problem of blocking engine and exhaust heat while wanting a great, flexible, black finish. With a proprietary high temperature black coating, Black Floor and Tunnel Shield controls heat from getting into interiors and protects components from damage. Aggressive adhesive backing makes installation easy. Flexible - easily shapes to firewalls, trans tunnels, floors, and more. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Proprietary high temperature black coating Wind and water will not affect adhesive Minimum clearance required, only 3/16 in. thick Easily shape, trim, peel and stick Aggressive self-adhesive backing DO NOT apply directly to exhaust components. Bending in a metal break or making sharp bends may crack the black coating. This will not change the performance of the product.

• Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
• Serves As A Barrier To Unwanted Road/Tire And Engine Noise
• Aggressive Self-Adhesive Backing Holds Past 450Degrees F
• Withstands Direct High Temperatures Up To 1750Degrees
• Blocks Radiant Heat From Entering Driver Compartment
• Adheres To Almost Any Surface/Material/Fiberglass
• Minimum Clearance Required Only 3/16 in. Thick
• Easy To Form To Shapes And Contours
• Constructed From 10 Mil Aluminum
• Peel and stick adhesive backing
• Just Trim Peel And Stick

Trans Tunnel Plate Heat Shield blocks exhaust heat from coming through the transmission tunnel keeping interior cool and comfortable. A well known and long time problem with many Corvettes is the amount of heat transferred into and through the console. DEI has the solution to dramatically reduce the amount of heat transferred to the C5 Corvette (1997-2005) Transmission Tunnel Reinforcement Plates and into the vehicle's interior. This shield reduces the negative effects of in-cabin excessive high temperatures and improve the experience of driving a Corvette. Reduce console & interior temperatures Precision die cut for a perfect fit & ease of installation No need to remove the Trans Tunnel Plate Peel backing, align into position & press into place Not affected by wind, water or other harsh conditions Extremely light weight

• Outer Material Withstands Up To 1750 Degrees Of Direct Heat
• Aggressive Adhesive Backing Holds Past 450 Degrees Of Heat
• Custom Cut To Size
• Adhesive Backed

This Part Fits:

DEI Hoodliner Insulation Kits are custom cut kits made from our Black Under Hood(TM) material. It controls engine heat and noise that is often a problem with today's modified vehicles packed with high performance components. These pre-cut hood insulation kits are the perfect replacement for your worn out, dirty hood liner, while protecting your paint from engine heat and chemicals. Each kit is custom CNC cut and have an aggressive adhesive backing makes for an easy installation. Replacement for dirty worn out hood liners Black textured finish Cooler hood surfaces protects your paint Reduced engine noise for quieter passenger compartment Easy peel & stick installation CNC cut for a precise fit Fits '66 -'67 Nova

• Black Textured Finish Looks Great And Is Long Lasting
• Self Stick - Just Peel And Stick Installation
• Precut To Fit Factory Hoods

This Part Fits:

Heat Screen solves the problem of heat from engines and exhaust intruding into interiors and components. Heat Screen offers an excellent way to reflect radiant heat away from a vehicle's interior and because it's flexible and can be trimmed-to-size to protect against excessive heat sources. Constructed of a high temperature resistant fiberglass material, and with a thickness of only .060 in., Heat Screen features a thermal barrier on one side made of a superior reflective aluminized glass fiber surface, capable of withstanding direct heat up to 1200F. Heat Screen can be used to protect areas where excessive heat can blister paint, where exhaust pipes run close to the fuel tank, and has many other applications including floorboards, body panels, and under carpeting. Available with or without an adhesive backing (see options above). A high temperature adhesive such as DEI's Hi-Temp Spray Adhesive or Heat Resistant Sealant can be applied to secure the non-adhesive backed Heat Screen as well as mechanical fasteners like screws or rivets. DEI's Cool Tape(TM) is ideal for sealing and covering seams. Excellent protection for painted surfaces Withstands 1200F of direct heat Can be secured with adhesive or fasteners Trim to desired length Use with DEI's Hi-Temp Spray Adhesive or Heat Resistant Sealant DO NOT apply directly to exhaust components.

• Aluminized Surface Reflects Up To 2000 Degrees F Radiant /1200 Degrees F Direct
• 36 in. x 40 in. Aluminized Mylar Radiant Matting
• Excellent Protection For Painted Surfaces
• Can Be Secured With Adhesive Or Fasteners
• Trim To Desired Length

Mini Versa Shields(TM) solve the problem of failing starters and other components due to heat soak. Mini Versa Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000°F. Simply wrap desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook & loop edge closure design. In most cases there is no need to remove component when installing Versa Shield. 5.25 in. W x 16.5 in. L Universal: trim length to size Edges close with hook & loop design Protect master cylinders, cool cans, distributors, fuel pumps & more No need to remove starter for installation in most cases

• Protects Master Cylinders/Cool Cans/Distributors/Fuel Pumps
• Withstands 500Degrees F Of Direct Heat/2000Degrees Radiant
• Edges Attach To Itself With Hook And Loop Closure Design
• No Need To Remove Starter For Installation In Most Cases
• Can Easily Be Removed For Shows
• Universal-Trim Length To Size
• 5.25 in. x 16.5 in.

Glass Fiber Exhaust Wraps solve the problem of extreme underhood heat and improve exhaust system performance. An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II(TM). Note of Caution:Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints.

• Withstands 1200 Degrees F Direct/2000 Degrees F Radiant
• Reduce Under Hood Temperatures a Realistic 50 Percent
• Decreases Exhaust Density And Increases Exhaust Flow
• Only Exhaust Wrap With Installation Guide Lines
• Added Durability And Heat Retention
• Improves Horsepower

Floor & Tunnel Shield II(TM) solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor annd Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16 in. thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor and Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor and Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Hi-temp adhesive for a do-it-once install Extreme heat barrier - aluminum side should face the heat Only 3/16 in. thick Use as barrier to reflect and insulate from any heat source Great for exterior applications DO NOT apply directly to exhaust components.

• Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
• Serves As A Barrier To Unwanted Road/Tire And Engine Noise
• Aggressive Self-Adhesive Backing Holds Past 450 Degrees F
• Withstands Direct High Temperatures Up To 1750Degrees
• Blocks Radiant Heat From Entering Driver Compartment
• Adheres To Almost Any Surface/Material/Fiberglass
• Minimum Clearance Required Only 3/16 in. Thick
• Easy To Form To Shapes And Contours
• Constructed From 10 Mil Aluminum
• Peel and stick adhesive backing
• 10 in x 10 in / 0.83 sq ft
• Just Trim Peel And Stick

Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Size: 0.625 (5/8) inch x 100 feet Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.

• Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
• Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
• Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
• Burn Protection During Under Hood Repairs And Maintenance
• Use For Bundling And Protecting Hoses
• Fire Tape Not Included
• Electrical Wiring Etc.

Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Size: 0.375 (3/8) inch x 100 feet Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.

• Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
• Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
• Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
• Burn Protection During Under Hood Repairs And Maintenance
• Use For Bundling And Protecting Hoses
• Fire Tape Not Included
• Electrical Wiring Etc.

Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length *DO NOT apply directly to exhaust components.

• Quick, tool-free installation, no line or hose removal required. Cut to desired length, slide on, and secure with hook-and-loop closure. Adjustable diameter fits most hose and line sizes.
• Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
• Precision-engineered using 19 oz high-temperature heat treated glass fiber insulation, finished with a durable aluminum outer layer.
• Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
• Proudly manufactured in the USA with a focus on quality and craftsmanship.
• Fireproof

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.

• Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
• Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
• Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
• Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
• Proudly manufactured in the USA with a focus on quality and craftsmanship.
• 5 Popular Diameters To Choose From

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.

• Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
• Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
• Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
• Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
• Proudly manufactured in the USA with a focus on quality and craftsmanship.
• 5 Popular Diameters To Choose From

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.

• Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
• Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
• Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
• Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
• Proudly manufactured in the USA with a focus on quality and craftsmanship.
• 5 Popular Diameters To Choose From

Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length *DO NOT apply directly to exhaust components.

• Quick, tool-free installation, no line or hose removal required. Cut to desired length, slide on, and secure with hook-and-loop closure. Adjustable diameter fits most hose and line sizes.
• Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
• Precision-engineered using 19 oz high-temperature heat treated glass fiber insulation, finished with a durable aluminum outer layer.
• Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
• Proudly manufactured in the USA with a focus on quality and craftsmanship.
• Fireproof

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.

• Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
• Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
• Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
• Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
• Proudly manufactured in the USA with a focus on quality and craftsmanship.
• 5 Popular Diameters To Choose From

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 foot lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.

• Capable Of Withstanding 500 Degrees F Direct/2000 Degrees F Radiant Heat
• 5 Popular Diameters To Choose From
• Pliable For Tight Bends
• Trim To Desired Length

Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Size: 1 inch x 25 feet Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.

• Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
• Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
• Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
• Burn Protection During Under Hood Repairs And Maintenance
• Use For Bundling And Protecting Hoses
• Fire Tape Not Included
• Electrical Wiring Etc.

Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Size: 0.75 (3/4) inch x 25 feet Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.

• Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
• Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
• Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
• Burn Protection During Under Hood Repairs And Maintenance
• Use For Bundling And Protecting Hoses
• Fire Tape Not Included
• Electrical Wiring Etc.

Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Size: 0.625 (5/8) inch x 25 feet Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.

• Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
• Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
• Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
• Burn Protection During Under Hood Repairs And Maintenance
• Use For Bundling And Protecting Hoses
• Fire Tape Not Included
• Electrical Wiring Etc.

Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Size: 0.375 (3/8) inch x 25 feet Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.

• Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
• Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
• Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
• Burn Protection During Under Hood Repairs And Maintenance
• Use For Bundling And Protecting Hoses
• Fire Tape Not Included
• Electrical Wiring Etc.

Fire Wrap 3000(TM) thermal insulator sleeve is constructed from the same material as DEI Fire Sleeve(TM) but with the convenience of a hook & loop edge closure design. Fire Wrap 3000(TM) provides the same top quality heat insulation and protection yet offers the added convenience of easy installation by simply wrapping around wires, cables or hoses without the need of disconnecting. Withstands direct heat up to 500°F Protects against oil, dirt, road grime & other contaminates Pliable enough to shape & fit tightest bends Minimum bulk length available is 3 feet Size: 1 inch ID, cut to desired length

• Protects Against Oil/Dirt/Road Grime And Other Contaminates
• Pliable Enough To Shape And Fit Tightest Bends
• Withstands Direct Heat Up To 500Degrees F

Xpedition ADV interiors are EXTREMELY noisy. DEI’s new Sound Control kit significantly reduces engine noise & vibration, delivering a quieter, more comfortable cabin on every ride. This comprehensive kit features a clean factory-finished look, and is built from durable, high-quality materials. Backed by DEI’s trusted quality & performance and proudly made in the USA.Cabin RoofDEI D-Mat is precision CNC-cut to fit seamlessly inside the front and rear headliners, delivering effective sound deadening and thermal insulation across the entire roof area.This kit is intended for owners that have already made significant modifications to their Xpedition ADV and have not addressed the roof area for insulation and sound control. For a complete sound control system, please use DEI part number 902411.

• This kit is intended for owners that already made significant modifications to their Xpedition and have yet to install insulation and sound control for the roof area
• The cabin roof D-Mat is precision CNC-cut to fit seamlessly inside the front and rear headliners

This Part Fits:

DEI's Speed Tape(TM) has multiple uses including race applications, temporary damage repairs and taping body seams to name a few. Speed Tape(TM) tears straight and easy every time and is available in eight colors as well as the popular checker-board. Color Rolls 2 in. x 90 ft Checker-board Roll 2 in. x 45 ft

• Race Applications/Temporary Damage Repairs/Taping Body Seams
• Available In 8 Colors And Checker Board
• Tears Straight And Easy Every Time
• 2in x 45ft Roll
• Multiple Uses

Block moisture, reduce noise, and insulate doors with this hi-tech, lightweight vapor barrier. Kits offer tailored protection for your vehicle’s interior, custom-cut for a seamless fit and easy installation. Designed to act as a powerful vapor barrier, these kits help block out moisture while providing insulation against noise and extreme temperatures. Perfect for preserving a quieter, more comfortable cabin environment, DEI’s door kits combine high-quality soundproofing and thermal insulation to enhance driving comfort and protect your vehicle’s interior. Achieve next-level insulation and moisture resistance.

• Hi-Tech, light weight vapor barrier reduces condensation while eliminating noise and vibration
• Closed cell PVC foam with reflective ALUMINUM facing
• Replaces worn-out, ineffective vapor barriers
• Adhesive backing for easy install
• Conforms to irregular surfaces

BOOM Mat's new Jeep(R) Wrangler Sound Deadening Headliner provides a simple pre-shaped peel and stick kit that dresses up the interior of Jeep hard tops while minimizing annoying outside noise and vibrations while insulating from exterior weather conditions. Riding in a Jeep is great fun except for the truck's propensity for interior noise that makes it difficult to engage in conversations or even enjoy vehicle audio systems. Now there is an easy solution. Installed Boom Mat's new Sound Deadening Headliner has been tested to reduce noise levels from 3 to 4 decibels. This is a significant change in sound level that will improve overall interior acoustics so Jeep occupants can enjoy audio system and have conversations without excessive and irritating noise distractions. Headliner reduces noise levels 3 to 4 decibels Reduces radiant heat from roof Improves acoustics inside A significant change in noise level that will make it easier to have conversations & enjoy your favorite music 5 piece kit for 2004-2006 LJ Wranglers Open Cell Polyurethane Foam Finish is a Polymer Surface Treatment

• Pairs Perfectly With Jeep Wrangler Side Window Kit
• Insulate Interior From Heat And Cold
• Provides Additional Sound Deadening
• A Significant Change In Noise Level
• Peel And Stick Application
• Headliner Reduces
• 1 in. Thick
• 4 Pieces

This Part Fits:

Quiet your Mazda Miata with our premium vibration damping and noise reducing interior kit. By adding Boom Mat damping material to the metal floors, rear bulk head, and rear deck, you greatly reduce rattles, squeaks and vibrations. This creates a more comfortable interior with improved acoustics. Features: Easy to peel backing to make install simple Self adhesive backing so no mess Black finish Advantages: Easily forms to bends & curves Thin and pliable to fit in tight spaces 6 in.x 6 in. & 12 in.x 12 in. pre cut pieces for specific areas Works with 1990-2005 year Mazda Miatas; NA and NB. Benefits: Reduces noise & vibrations coming from metal body Keeps interiors quiet Improved interior acoustics

• Reduces Heat Intrusion From Engine Compartment
• No Modifications Are Needed For Installation
• Great Black Textured Finish

This Part Fits:

Trans Tunnel Plate Heat Shield blocks exhaust heat from coming through the transmission tunnel keeping interior cool and comfortable. A well known and long time problem with many Corvettes is the amount of heat transferred into and through the console. DEI has the solution to dramatically reduce the amount of heat transferred to the Corvette C6 (2005-2013) Transmission Tunnel Reinforcement Plates and into the vehicles' interior. This shield reduces the negative effects of in-cabin excessive high temperatures and improve the experience of driving a Corvette. Reduce console & interior temperatures Precision die cut for a perfect fit & ease of installation No need to remove the Trans Tunnel Plate Peel backing, align into position & press into place Not affected by wind, water or other harsh conditions Extremely light weight

• Outer Material Withstands Up To 1750 Degrees Of Direct Heat
• Aggressive Adhesive Backing Holds Past 450 Degrees Of Heat
• Custom Cut To Size
• Adhesive Backed

This Part Fits: