Fits 2001-2004 Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD models equipped with the LB7 Duramax engine.

The Industrial Injection Remanufactured LB7 Injection Pump is a precision-engineered solution designed to restore reliable fuel delivery and engine performance to your Duramax-powered truck. This pump is remanufactured to meet or exceed original equipment specifications, ensuring correct fuel atomization and rail pressure. It serves as a direct-fit replacement for worn factory units that may be causing hard starts, poor idling, or a loss of power.

• Manufacturer Part Number: 0986437303SE-IIS
• Direct replacement for LB7 fuel systems
• Remanufactured for optimal durability and performance
• Tested to ensure precise calibration and flow rates
• Fits 2001-2004 Chevrolet and GMC 2500 HD applications

Fits select GM vehicles requiring high-volume fuel delivery for high-performance EFI systems.

The Fuelab 49469 is a 494 Series High Output in-tank electric fuel pump designed to meet the demands of forced induction or high-horsepower naturally aspirated builds. Engineered for reliability and consistent pressure, this pump provides a 340 LPH flow rate to prevent lean conditions during spirited driving or track use. The center offset inlet configuration allows for a direct fit in many GM-specific fuel tank hangers and modules.

• Flow Rate: 340 LPH (Liters Per Hour)
• Inlet Configuration: Center Offset
• Pump Type: In-tank electric
• Series: 494 High Output
• Manufacturer Part Number: 49469

The Walbro GSS352G3 is a high-performance, high-pressure fuel pump designed for enthusiasts requiring reliable fuel delivery in applications exceeding 500 horsepower. This GSS line pump provides consistent flow across a wide pressure range, ensuring your engine receives the necessary fueling for high-output demands. Featuring an 11mm inlet that is positioned inline with the outlet, this unit is engineered for specific plumbing configurations and internal tank setups.

• Flow Rate: 350LPH (Liters Per Hour)
• Inlet Configuration: 11mm Inlet (Inline with the Outlet)
• Application Support: Optimized for engines with 500hp+
• Build Quality: UAW manufactured in Caro, Michigan, USA by TI Automotive
• MPN: GSS352G3

Each pump is engineered for superior hot fuel performance and long-term durability. By utilizing technical expertise developed over 60 years, TI Automotive ensures that every Walbro pump provides a direct-fit solution for high-demand fueling systems without the need for third-party manufacturing or outside sourcing.

Ensure consistent, high-pressure fuel delivery with the Walbro GSS250G3 in-tank fuel pump. As a core component of the proven GSS series from TI Automotive, this 190 LPH pump is engineered for performance applications requiring reliable fuel flow across a wide pressure range. It serves as a precision-engineered direct-fit replacement, designed to integrate seamlessly into existing fuel modules while offering superior hot fuel performance.

Every GSS250G3 is manufactured at the TI Automotive facility in Caro, Michigan. By maintaining complete control over the assembly process and utilizing UAW labor, Walbro ensures these pumps meet strict tolerances for longevity and performance. Whether you are replacing a worn OE unit or upgrading for mild performance gains, this high-pressure pump delivers the volume necessary to support your engine's demands.

• Flow Rate: 190 LPH
• Pump Type: In-tank high-pressure fuel pump
• Series: GSS Series (GSS250)
• Manufacturer Part Number: GSS250G3
• Manufacturing: UAW manufactured in Caro, MI, USA
• Performance: Optimized for superior hot fuel handling and consistent pressure delivery

The Walbro F90000274 High Pressure 450 LPH in-tank fuel pump is designed for high-performance forced induction and naturally aspirated engines requiring consistent fuel delivery at elevated pressures. Engineered by TI Automotive at their Caro, Michigan facility, this universal pump provides the necessary flow to support applications exceeding 500 horsepower.

As a high-pressure version of the award-winning TI Automotive 39/50 series, the F90000274 utilizes a turbine-style design that improves hot fuel handling and ensures a quiet, reliable operation compared to traditional gear-driven pumps. This unit is built to strict OE standards to ensure long-term durability and a precise fit in various custom or universal fuel tank modules.

• Manufacturer Part Number: F90000274
• Flow Rate: 450 LPH (Liters Per Hour)
• Configuration: In-tank, high-pressure version
• Application: Universal fitment (supports 500HP+)
• Manufacturing: UAW manufactured in Caro, MI, USA
• Design: Turbine-style internals for improved hot fuel performance

The Walbro F90000262 is a high-performance, universal in-tank fuel pump engineered for gasoline-powered engines demanding high fuel volume at consistent pressure. Built by TI Automotive in their Caro, Michigan plant, this 400LPH pump provides the flow necessary to support applications exceeding 500 horsepower. It features the proven 39/50 design architecture to ensure reliable performance under high-load conditions.

• Manufacturer Part Number: F90000262
• Flow Rate: 400 Liters Per Hour (LPH)
• Application: Universal in-tank mounting
• Fuel Compatibility: Gasoline only (NOT E85 compatible)
• Origin: UAW-made in Caro, Michigan, USA
• Performance: Designed for high-pressure requirements in 500hp+ engines

As an authentic TI Automotive product, this unit is manufactured in-house to ensure first-time fit and long-term durability. It serves as a reliable solution for performance enthusiasts seeking to upgrade their fuel system without switching to ethanol-based fuels. This pump delivers unquestioned fuel flow across a wide pressure range for consistent power delivery.

Fits select 1988-2000 Acura, Eagle, Ford, Honda, Mazda, Mitsubishi, and Nissan models including NSX, Civic, 240SX, and Sentra.

The Walbro GSS Series 190 LPH High Pressure Fuel Pump (GSS278) provides the consistent, high-volume fuel delivery required for performance-oriented engines. Manufactured by TI Automotive, these units are designed as direct-fit replacements for factory in-tank fuel modules, offering a significant upgrade over stock flow rates. Engineered for superior hot fuel performance and reliability, the GSS278 is an industry-standard choice for naturally aspirated and light forced-induction applications.

• Manufacturer Part Number: GSS278
• Flow Rate: 190 Liters Per Hour (LPH)
• Configuration: High-pressure in-tank turbine
• Manufacturing: UAW-manufactured in Caro, Michigan, USA
• Compatibility: Engineered for gasoline applications across various import platforms
• Maintains stable fuel flow across a wide pressure range to support modified power levels

The Walbro GCA756-2 Fuel Pump and Installation Kit Package is an essential upgrade for maintaining reliable fuel delivery. This package combines a high-performance fuel pump with a complete installation hardware set, ensuring a secure and efficient in-tank setup for both repair and performance applications.

Walbro components are engineered for durability and consistent pressure, making this kit a preferred choice for technicians and enthusiasts looking to replace a failing OE pump or support higher fueling demands. The inclusion of the application-specific installation kit reduces the need for sourcing individual connectors or mounting hardware.

• Manufacturer Part Number: GCA756-2
• Components: High-pressure fuel pump and comprehensive installation kit
• Installation: Designed for in-tank mounting
• Build: Robust internal design for long-term service life and consistent flow

Fits select 1992-2001 Honda Civic, Civic del Sol, and Acura Integra models.

The Walbro GCA3313-2 high-pressure 255LPH fuel pump is a necessary upgrade for high-performance naturally aspirated and forced induction builds. Designed to deliver consistent fuel flow and maintain critical pressure levels, this pump prevents lean conditions that can lead to engine damage under heavy load. This complete setup kit provides the essential components for a secure installation into the factory fuel tank assembly.

• Part Number: GCA3313-2
• Flow Rate: 255 Liters Per Hour (LPH)
• Design: In-tank electric high-pressure turbine
• Kit Includes: Fuel pump, filter strainer, wiring harness pigtail, rubber hose, and mounting hardware
• Compatibility: Replaces factory pump in OEM housing

Fits select 1990-1997 Mitsubishi 3000GT and Eclipse, Dodge Stealth, Eagle Talon, and Plymouth Laser models.

The Walbro 400-857 fuel pump installation kit by TI Automotive provides the necessary hardware for a secure, direct-fit replacement in high-pressure, high-flow fuel systems. This application-specific kit is engineered to integrate seamlessly with high-performance pumps, ensuring correct alignment and electrical connection within the factory fuel tank assembly.

Designed for use with TI Automotive GSS315 or F20000312G3 fuel pumps, this kit includes the essential components to restore or upgrade your fuel delivery system without modification to the factory housing. Note: This product includes the installation hardware only; the fuel pump is not included.

• Direct-fit design for application-specific mounting
• Engineered for high-pressure, high-flow EFI systems
• Compatible with TI Automotive GSS315 and F20000312G3 pumps
• Includes filter strainer, electrical harness, and necessary hardware
• Manufacturer Part Number: 400-857

Fits 1989-1995 Mazda RX-7 across all trims including Base, Turbo, Convertible, and R1/R2 performance models.

This Walbro (TI Automotive) 400-854 installation kit provides the essential hardware required to integrate a high-performance fuel pump into your Mazda RX-7's factory fuel tank. Designed as a direct-fit replacement for aged OE components, this kit uses a race-proven design to support high-flow and high-pressure fuel systems, ensuring consistent delivery during spirited driving or track use.

This application-specific kit is engineered for use with TI Automotive GSS341G3 or F20000312G3 fuel pumps. It includes the critical mounting and electrical components needed for a secure install. Please note: this is an installation hardware kit only; the fuel pump itself is sold separately.

• Manufacturer Part Number: 400-854
• Compatibility: Designed for use with TI Automotive GSS341G3 or F20000312G3 pumps
• Design: Direct-fit replacement for factory fuel pump hardware
• Application: High-pressure, high-flow fuel system installations
• Contents: Includes all necessary application-specific installation components

Fits select 1995-2006 Eagle Talon TSi, Mitsubishi Eclipse (GST/GSX/Spyder GST), and Lancer Evolution models. This application-specific installation kit provides the necessary hardware to securely mount a high-performance fuel pump into your factory tank assembly.

Designed by TI Automotive for use with the GSS317 fuel pump, this kit replaces aged or brittle factory components that can lead to fuel leaks or pressure drops. The race-proven design ensures a direct-fit replacement, maintaining fuel system integrity under high-pressure and high-flow demands. Please note that this is an installation accessory kit and does not include the fuel pump itself.

• Manufacturer Part Number: 400-847
• Optimized for TI Automotive High Performance fuel pumps
• Direct-fit replacement for OE mounting configurations
• Includes fuel strainer, wiring pigtail, and necessary installation hardware
• Designed for high-flow EFI applications

Fits 1989-1998 Nissan 240SX (Base, LE, SE, and XE).

This TI Automotive (Walbro) application-specific installation kit provides the essential hardware required to install a high-performance fuel pump into your vehicle's factory tank. Engineered for high-pressure and high-flow demands, this kit ensures a secure, direct-fit replacement for the OE components using race-proven technology. It is designed to simplify the installation process while maintaining the integrity of the fuel system's delivery.

Note: This is an installation kit only; the fuel pump is sold separately.

• Manufacturer Part Number: 400-766
• Optimized for use with TI Automotive GSS341G3 or F20000312G3 fuel pumps
• Direct-fit replacement design for 1989-1998 S13 and S14 chassis
• Includes application-specific filter strainer, wiring pigtail, fuel hose, and clamps
• Race-proven design for high-pressure, high-flow EFI engines

Fits 1994-1998 Toyota Supra Turbo.

The Walbro 400-762 Fuel Pump Installation Kit provides the application-specific hardware required to install TI Automotive high-performance fuel pumps into the factory tank assembly. This direct-fit replacement kit is engineered for high-pressure, high-flow fuel systems, ensuring a secure fit and reliable fuel delivery for race-proven applications.

• Direct-fit replacement design for 1994-1998 Toyota Supra Turbo
• Compatible with TI Automotive GSS341G3 or F20000312G3 fuel pumps
• Manufacturer Part Number: 400-762
• Includes application-specific installation components
• TI Automotive high-performance technology
• Note: Fuel pump is not included and must be purchased separately

Ensure your high-performance fuel system can meet the demands of high-boost or ethanol-based applications with this set of five Injector Dynamics 2600cc injectors. Engineered for extreme flow requirements, these injectors provide the precise metering and atomization necessary for stable idling and consistent wide-open throttle performance.

This configuration features a 34mm overall length (without adapters) and a 14mm lower o-ring, designed for specific fuel rail and intake manifold depths. Each injector is part of a flow-matched set to ensure balanced cylinder-to-cylinder fuel delivery, essential for protecting your engine under heavy load. The high-impedance design makes them compatible with most modern ECUs.

• Manufacturer Part Number: 2600.34.14.14.5
• Flow Rate: 2600cc/min
• Length: 34mm (No Adapters)
• Lower O-Ring: 14mm
• Quantity: Set of 5 matched injectors

The BLOX Racing Type-A Fuel Management Unit (FMU) is a vacuum-operated fuel pressure regulator designed specifically for forced induction applications that require a mechanical increase in fuel delivery. By sensing manifold pressure, the FMU increases fuel pressure at a fixed 12:1 ratio relative to boost, ensuring the engine receives the necessary fuel volume to maintain safe air/fuel ratios under high-load conditions.

This unit is a critical component for turbocharger or supercharger setups where the factory ECU is not being recalibrated for larger injectors. It provides a reliable, mechanical solution for fuel management by forcing the stock injectors to flow more as boost pressure rises. Built for precision and durability, the Type-A FMU is intended for return-style fuel systems and serves as a proven tool for entry-level forced induction tuning.

• Fixed 12:1 fuel pressure rise ratio
• Mechanical diaphragm-style operation
• Compatible with return-style fuel systems
• Essential for non-interfaced forced induction setups
• Manufacturer Part Number: BXFU-00400-12-BK

Fits select 2006-2015 BMW 1 Series, 3 Series, and X1 (135i, 328i, 335i, M3, sDrive28i, xDrive35i).

The DeatschWerks X2 Series Dual Pump Module is a high-performance fueling solution designed for BMW owners pushing the limits of the factory fuel system. This module replaces the restrictive OE unit with a high-flow dual-pump configuration, capable of supporting the significantly higher fuel demands required for forced induction or E85 applications. By utilizing two DW430 pumps, this system ensures consistent pressure and volume even under high-load racing conditions.

Constructed for durability and precision fitment, this module integrates directly into the factory fuel tank. It provides a clean, reliable way to run a dual-pump setup without the need for custom fabrication or external surge tanks. The DW430 pumps are specifically chosen for their balance of high-flow performance and long-term reliability in specialized fuel environments.

• Manufacturer Part Number: 9-437-7071
• Dual DW430 fuel pumps included for maximum delivery
• X2 Series module designed for drop-in chassis compatibility
• Optimized for high-horsepower N54, N55, and S65 builds
• Maintains factory fuel level sender functionality

The DeatschWerks DW400 Fuel Pump Module is a high-performance fueling solution designed to support increased power levels on modern Mopar platforms. This drop-in module replaces the factory assembly to provide the flow required for forced induction or high-output naturally aspirated builds without sacrificing the reliability of your fuel system components.

Fits select 2005-2022 Chrysler 300, Dodge Challenger, Dodge Charger, and Dodge Magnum (6.2L).

• Direct-fit module assembly for simplified installation into the factory fuel tank
• Equipped with the high-flow DW400 series fuel pump
• Maintains original equipment fuel level sender and venturi functionality
• Compatible with pump gas and race fuels to suit various performance applications
• Engineered for high-horsepower street and track use
• Manufacturer Part Number: 9-411-7061

Fits select 2006-2015 BMW 1 Series, 3 Series, and X1 models (including 135i, 328i, 335i, M3, and sDrive/xDrive trims).

The DeatschWerks X2 Series Dual Pump Module is a high-performance fueling solution engineered for enthusiasts pushing the limits of their E8X, E9X, and E84 platforms. This module (MPN: 9-000-7071) allows for the seamless integration of a dual high-flow fuel pump setup into the factory fuel tank, providing the volume necessary for high-boost forced induction or E85 ethanol-tuned applications where the OE single-pump unit falls short.

• Manufacturer Part Number: 9-000-7071
• Series: X2 Dual Pump Module
• Compatibility: Designed for factory fuel tank mounting and integration
• Capability: Dual-pump configuration to support high-horsepower demands

Vehicle Fitment:

• 2011-2013 BMW 1 Series M, 135i, 135is
• 2006-2013 BMW 325i, 328i, 328i xDrive, 330i, 330xi
• 2007-2013 BMW 335i, 335i xDrive, 335is
• 2008-2013 BMW M3
• 2012-2015 BMW X1 (sDrive28i, xDrive28i, xDrive35i)

The Fuelab 848 Series Standard In-Line Fuel Filter provides high-efficiency filtration and integrated pressure maintenance for performance fuel systems. Designed to protect sensitive fuel injectors from fine contaminants, this filter features a 6-micron fiberglass element. The integrated internal check valve is a critical feature for performance applications, as it prevents fuel drain-back to maintain system prime and ensure faster, more reliable engine restarts.

• Standard length housing constructed for high-flow capacity
• -8AN male flare inlet and outlet ports for secure plumbing into existing fuel lines
• 6-micron replaceable fiberglass element for maximum debris capture
• Integrated check valve maintains line pressure and prevents backflow
• Durable black anodized finish for corrosion resistance and a clean aesthetic
• Compatible with gasoline, diesel, methanol, and ethanol fuels
• Manufacturer Part Number: 84832-1

Fits 2002-2014 Subaru WRX and 2007-2018 Subaru WRX STI.

Torque Solution Top Feed Fuel Rails are engineered to support high-horsepower builds by providing consistent, high-volume fuel delivery to your injectors. These rails replace the restrictive factory fuel distribution system, allowing for improved flow and better performance under heavy load and high-boost conditions. CNC machined for a precise fit, they are a critical upgrade for Subaru owners utilizing top feed injectors who require more fuel volume than the stock components can provide.

• CNC machined 6061 billet aluminum construction
• Corrosion-resistant black anodized finish for durability and engine bay aesthetics
• Designed specifically for top feed fuel injector configurations
• Large internal bore to eliminate fuel pressure drops and maximize flow capacity
• Direct fit for specified Subaru EJ-series engines
• Manufacturer Part Number: TS-SU-400BK.2

Fits 1987-1995 Jeep Wrangler models equipped with a 20-gallon fuel tank (2.5L / 4.0L).

This Omix fuel pump module is a direct-fit replacement engineered to restore reliable fuel delivery and accurate level sensing to your Jeep YJ. Designed to meet or exceed factory quality standards, this complete assembly simplifies installation by replacing the entire worn module rather than individual components. It features an OE-style lock ring design for a secure seal and correct orientation within the tank.

• Specifically designed for 20-gallon fuel tanks
• Calibrated 1-88 ohm impedance range (88 ohms indicates Full)
• Complete assembly includes fuel pump, module, and filter
• Directly replaces OE part number 5003861AA
• Manufacturer Part Number: 17724.16
• For the replacement pump only, use Omix 17709.18
• Limited 5-year manufacturer warranty

Fits 1954-1959 Jeep Willys CJ-3 and CJ3 Base models.

This Omix steel fuel tank is engineered as a direct-fit replacement for leaking or corroded factory units on vintage Willys Jeeps. Built to OE specifications, this metal tank maintains the classic vehicle's fuel system integrity while ensuring proper fitment within the chassis. It features a 10.5-gallon capacity and includes a pre-installed fuel line bung and a drain plug located at the tank bottom for easier maintenance and system flushing.

• Material: Durable stamped steel construction
• Capacity: 10.5 gallons
• OE Reference: 911895
• Features: Integrated fuel line bung and bottom-mounted drain plug
• Required Components: For sending unit use 17724.02; for strap kit use 12025.24
• Manufacturer Part Number: 17720.05

Fits 1941-1971 Willys and Jeep models with 134ci L-Head or F-Head engines, including MB, CJ-2, CJ-3, CJ-5, and CJ-6.

Restore reliable fuel delivery to your vintage engine with this Omix OE-style mechanical fuel pump. Designed to meet or exceed factory specifications, this pump is a direct-fit solution for maintaining the period-correct look and performance of your Willys or Jeep fuel system. This unit features a classic glass sediment bowl, allowing for quick visual inspection of fuel quality and debris levels.

This is a single-action pump and is specifically designed for models that do not require vacuum ports for windshield wipers. It features a robust mechanical arm and precise internal diaphragms to ensure consistent fuel pressure from the tank to the carburetor.

• Replaces OE part number: 119729
• Type: Mechanical Single-Action
• Engine Compatibility: 134 CI (L-Head & F-Head)
• Bowl Type: Glass Sediment Bowl
• Vacuum Ports: None
• Warranty: Limited 5-Year Manufacturer Warranty
• Manufacturer Part Number: 17709.01

The Fuelab Prodigy 41401-1 High Pressure EFI In-Line Fuel Pump is engineered for high-demand street and strip applications, providing enough volume to support up to 1000 HP. This pump utilizes a sophisticated DC brushless motor to provide superior efficiency and significantly lower current draw compared to traditional brushed pumps, reducing fuel temperature and increasing reliability.

Designed for external mounting, the 41401-1 features speed adjustability, allowing for precise control of fuel delivery when paired with compatible controllers. Its high-pressure capability makes it a direct fit for performance EFI systems requiring stable fuel flow under load.

• Manufacturer Part Number: 41401-1
• Performance Rating: Supports up to 1000 HP
• Motor Technology: Speed Adjustable DC Brushless
• System Type: High Pressure EFI
• Application: Street/Strip usage
• Housing Finish: Black Anodized
• Configuration: In-Line / External

Fits select 1980-1989 vehicles from Buick, Cadillac, Chevrolet, Chrysler, Dodge, DeTomaso, and GMC. The Edelbrock AVS2 Series #1906 is a satin-finished four-barrel carburetor engineered for superior street performance on small-block and big-block engines requiring 650 CFM of air-fuel flow.

As the next generation in Edelbrock carburetors, the AVS2 features upgraded annular flow primary boosters. Each booster is designed with eight equally spaced orifices, significantly improving fuel atomization compared to traditional down-leg boosters. This design eliminates flat spots during the transition from idle to full throttle, ensuring crisp off-idle response and smoother cruising performance. The AVS2 is compatible with both single-plane and dual-plane intake manifolds, making it a versatile choice for a wide variety of engine configurations.

• Airflow: 650 CFM
• Choke Type: Electric
• Secondary Type: Air Valve
• Primary Metering Jets: .101
• Secondary Metering Jets: .098
• Metering Rods: .070 x .037
• Step-Up Spring: Orange (5" Hg)
• Vacuum Ports: Timed and full vacuum ports included for ignition advance
• Recommended Accessories: Compatible with Carburetor Stud Kits #8008 or #8024
• Manifold Compatibility: Matches Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II, and similar designs
• Manufacturer Part Number: 1906

Fits select 2016-2022 Cadillac ATS-V, CTS-V, and Chevrolet Camaro (LT / SS).

The Aeromotive 18076 Triple 450 Series Stealth In-Tank Fuel Pump is a high-performance fuel delivery solution designed for extreme output requirements. This system integrates a triple 450 LPH pump configuration into a single stealth assembly, allowing for high-volume fueling while utilizing the factory fuel tank. Engineered with aerospace-grade tolerances, this drop-in unit solves fuel starvation issues in high-horsepower applications without the need for complex external surge tanks or noisy external pumps.

Aeromotive utilizes decades of track experience to ensure consistent fuel pressure and flow under demanding conditions. The in-tank design provides a quieter operation and keeps the pumps submerged in fuel for better thermal management and longevity.

• Triple 450 LPH pump configuration for maximum flow capacity
• Stealth series design for clean, drop-in installation
• Aerospace-grade engineering and meticulous tolerances
• Maintains factory fuel tank functionality and baffling
• Manufacturer Part Number: 18076

This Walbro Fuel Pump & Installation Kit Package (MPN GCA3366-2) fits select 1992-2001 Honda Civic, Odyssey, and Acura Integra models. Designed as a complete solution for restoring or upgrading your fuel delivery system, this kit provides a reliable alternative to the factory pump by utilizing a high-performance Walbro unit alongside the necessary hardware for a secure, drop-in installation.

• Genuine Walbro fuel pump for consistent pressure and flow across all RPM ranges
• Complete installation kit simplifies the swap with compatible filters and wiring components
• Engineered for high reliability in both daily driving and performance applications
• Manufacturer Part Number: GCA3366-2

Vehicle Fitment:

• 1994-2001 Acura Integra (GS, GS-R, LS, RS, Special Edition, Type R)
• 1992-1999 Honda Civic (CX, DX, EX, GX, HX, LX, Si, VX, Value Package)
• 1995-1998 Honda Odyssey (EX, LX)

Ensure a secure and reliable fuel system upgrade with the Walbro (TI Automotive) 400-991 Fuel Pump Installation Kit. This application-specific kit provides the necessary hardware to properly mount a high-performance fuel pump into the factory fuel module, replacing worn OE components with race-proven technology designed for high-pressure and high-flow environments.

Fits 1995-2005 Dodge Neon (including ACR, R/T, and SRT-4) and 2008 Chrysler PT Cruiser Base.

• Specifically engineered for use with the TI Automotive GRJ444 fuel pump
• Includes all essential installation components for a direct-fit replacement
• Designed to maintain pump stability and filtration integrity in high-performance applications
• Genuine TI Automotive/Walbro component (Manufacturer Part Number: 400-991)
• Note: Installation kit only; fuel pump is not included

Fits 1994-1998 Dodge Ram 2500 and 3500 models equipped with the 5.9L 12-valve Cummins engine and Bosch P7100 injection pump.

The BD Diesel 3000 RPM Governor Spring Kit is designed to overcome the factory defueling limits of the Bosch P7100 mechanical injection pump. By replacing the original governor springs, this kit enables your Cummins engine to maintain fueling up to 3,000 RPM. This modification significantly improves mid-to-high-end throttle response and provides a broader power band, reducing the need for premature gear shifts during towing or performance driving.

• Increases usable engine speed to 3,000 RPM for improved horsepower levels
• Enhances throttle response across the entire RPM range
• Optimizes pump output without requiring replacement plungers or barrels
• Designed specifically for the P7100 Bosch mechanical injection pump
• Manufacturer Part Number: 1040187
• Warranty: 12-Month / 12,000-Mile

Technical Note: This kit involves precise internal modifications to the fuel injection pump. Installation must be performed by a trained, qualified P7100 technician. Improper installation can result in engine damage, excessive heat/smoke, or poor engine performance.