Fits select 1987-2004 Nissan D21, Pickup, and Frontier. This Hellwig EZ-1000 Helper Spring kit is a medium-duty suspension solution designed to restore vehicle ride height, improve control, and increase stability when towing or hauling. These units are fully adjustable, allowing you to tune the spring tension via heavy-duty U-bolts to suit your specific load requirements or to level out uneven side-to-side weight distribution.

Manufactured at Hellwig's California facility, these springs are crafted from heat-treated ASTM 5160 alloy spring steel for long-term resilience and performance. The components feature a high-quality powder-coated and plated finish to resist corrosion in harsh underbody environments. The simple bolt-on design installs easily with common hand tools, making it an effective upgrade for vehicles requiring up to 1,000 lbs of additional level load support.

• Level load capacity: Up to 1,000 lbs
• Material: Heat-treated ASTM 5160 alloy spring steel
• Finish: Heavy-duty powder coating and zinc plating
• Adjustability: Fully tunable via included U-bolt hardware
• Installation: Simple bolt-on design using basic hand tools
• Manufacturer Part Number: 1265
• Origin: Made in the USA
• Warranty: Limited Lifetime Warranty

Fits select 1999-2005 Ford Excursion, F-250, and F-250/F-350 Super Duty 4WD models.

Skyjacker Softride leaf springs are engineered to provide a significant improvement in ride quality without compromising load capacity or durability. Unlike standard springs, these progressive multileaf packs use American steel that undergoes a high-velocity shot-peening process. This technique compresses the steel surface, increasing tensile strength and allowing for maximum wheel travel and extended service life. To eliminate internal friction and binding, Skyjacker utilizes bolt-style spring clips rather than traditional bend-style clips.

The individual leaves feature a tapered design across their entire length, ensuring load is distributed evenly and flex is maximized at the leaf ends. This prevents individual leaves from digging into those above them, resulting in a smoother suspension cycle and consistent performance under load.

• Manufacturer Part Number: F965S
• Construction: Progressive multileaf pack using American steel
• Surface Treatment: Shot-peened for increased tensile strength and fatigue resistance
• Clip Design: Bolt-style clips to reduce friction and prevent binding
• Spring Profile: Tapered leaf ends for even load distribution and enhanced flex
• Load Capacity: Equal to or greater than OE specifications
• Warranty: Limited Lifetime Warranty

Fits 2025 GMC Sierra 1500 (Pro, SLE, SLT, Elevation, Denali, Denali Ultimate, AT4, AT4X).

The 2025 GM 1500 chassis features a redesigned rounded leaf spring top plate and matching U-bolts. While functional for stock height, this design complicates the installation of aftermarket lift blocks. The Cognito Leaf Spring Top Plate Conversion (MPN: 110-91316) allows you to convert these rounded components back to a traditional flat top plate configuration.

This conversion is essential for 2025 GMC Sierra 1500 owners installing lift or leveling kits that utilize rear blocks, as it restores the ability to use standard heavy-duty GM square U-bolts for a secure, properly aligned fitment against the block surface.

• Converts factory rounded top plates to a flat design
• Enables use of traditional GM square U-bolts
• Required for 2025 models using rear lift or leveling blocks
• Precision engineered for exact fitment on 2025 GMC Sierra 1500 models
• Manufacturer Part Number: 110-91316

Fits select 2004-2026 Chevrolet Silverado 1500/2500/3500, GMC Sierra 2500, RAM ProMaster, and Dodge/Freightliner/Mercedes-Benz Sprinter 2500/3500.

The Hellwig LP-25 Load Pro helper spring is the heavy-duty workhorse of the Hellwig line, engineered specifically for fleet vehicles and trucks that consistently carry heavy loads. Utilizing a full-time spring rate design, this 3-leaf helper spring stack provides up to 2,500 lbs of level load capacity, significantly reducing rear-end sag, improving cornering stability, and enhancing overall control under load.

Built from high-quality alloy steel, the Load Pro series is tunable, allowing you to adjust the spring rate to match your specific hauling or towing requirements. This is an ideal solution for service trucks, delivery vans, and work vehicles that require constant suspension support.

Note: A vehicle-specific LP Mounting Kit is required for installation (sold separately). If your vehicle is equipped with factory contact overload springs, please verify fitment for your specific model year.

• Manufacturer Part Number: 2551
• Series: Load Pro (LP-25)
• Level Load Capacity: Up to 2,500 lbs
• Design: 3-leaf stack with full-time spring rate
• Application: Suitable for 1-ton and fleet applications
• Features: Tunable spring rate for custom load management
• Warranty: Limited Lifetime Warranty

Fits select 2004-2012 Chevrolet Colorado and GMC Canyon models. The Hellwig 1520 Load Pro 15 (LP-15) helper spring kit is designed to increase your vehicle's level load carrying capacity by up to 1,500 lbs, up to the manufacturer's Gross Vehicle Weight Rating (GVWR). These helper springs are an ideal solution for small and mid-size trucks that frequently haul equipment or tow trailers and require improved stability and control.

Manufactured in California, each spring is crafted from heat-treated ASTM 5160 alloy spring steel for long-lasting durability. The kit features a simple bolt-on design that installs using common hand tools. The included heavy-duty U-bolts allow for precise tuning; you can easily adjust the tension to suit your specific load requirements or towing needs. The components are finished with a combination of plating and powder coating for superior corrosion resistance.

• Manufacturer Part Number: 1520
• Load Capacity: Up to 1,500 lbs
• Material: Heat-treated ASTM 5160 alloy spring steel
• Adjustable: Tunable U-bolts for varying load requirements
• Finish: Powder-coated and plated components for corrosion protection
• Installation: Simple bolt-on design; includes all necessary hardware and instructions
• Origin: Manufactured in the USA
• Warranty: Limited Lifetime Warranty

Fits 1987-1995 Jeep Wrangler YJ models including Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport.

This Zone Offroad 2-inch lift leaf spring (ZONJ0200) provides increased ground clearance for the YJ platform while maintaining predictable handling. The 4-leaf design features military wrapped ends for enhanced durability and safety on the trail. Please note that this is a single leaf spring; two are required per axle, and bushings and U-bolts are not included.

• Lift Height: 2 inches
• Construction: 4-leaf pack with military wrapped ends
• Placement: Fits front or rear (see driveline notes for rear use)
• Required Hardware: Bushings and U-bolts are sold separately
• Driveline Correction: For rear installations without a transfer case drop or SYE, 4-degree shims are required to correct the pinion angle (Shim Kit #U3001 and Center Pin Kit #U3010)
• Manufacturer Part Number: ZONJ0200

Fits select 2008-2016 Ford F-250 and F-350 Super Duty trucks.

Skyjacker Softride technology is engineered to improve handling on technical terrain while maintaining a controlled ride on the street. These progressive multi-leaf packs replace the factory rear springs, providing a 6-inch lift height. Manufactured using high-quality American steel, these springs utilize bolt-style spring clips to eliminate inter-leaf friction and allow for better articulation compared to standard cinch-style clips.

• Lift Height: 6 Inches
• Location: Rear
• Material: American Steel
• Construction: Progressive multi-leaf pack design
• Spring Clips: Bolt-style to reduce friction and noise
• Load Capacity: Equal to or greater than OE specifications
• Manufacturer Part Number: FR86
• Warranty: Limited Lifetime Warranty

Fits 1987-1991 Dodge W250 and 1989-1991 Dodge W350 Base models (Cummins Diesel). This Skyjacker 4-inch suspension lift system is engineered to provide increased ground clearance and a more aggressive stance while maintaining consistent ride quality. Designed to handle the weight of the Cummins drivetrain, this system improves handling and suspension travel for both highway driving and off-road use.

This comprehensive kit includes four monotube shocks specifically valved to provide a responsive feel and stable control in varying conditions. The package includes all necessary mounting hardware and step-by-step instructions for a complete installation on 4WD Dodge trucks.

• Part Number: D400CDKS4-M
• Lift Height: 4 Inches
• Includes four (4) Monotube series shocks
• Engineered for Dodge W250 and W350 Cummins Diesel applications
• Maintains factory ride quality with improved off-road responsiveness
• Includes all required mounting hardware
• Manufacturer Limited Lifetime Warranty

Fits 1987-1991 Dodge W250 and 1989-1991 Dodge W350 4WD models. This Skyjacker 4-inch suspension lift system is engineered specifically for the first-generation Dodge Cummins-equipped trucks to provide increased ground clearance and room for larger tire packages. This comprehensive system delivers a level stance and improved off-road capability without sacrificing the predictable handling required for street driving and towing.

• Provides 4 inches of suspension lift for increased clearance and a more aggressive profile.
• Includes four Skyjacker Hydro 8000 series shocks featuring velocity-sensitive valving for consistent performance on varied terrain.
• Specific spring rates designed to handle the weight and torque of the Cummins diesel powerplant.
• Includes all necessary mounting hardware and detailed installation instructions.
• Durable finish for long-term corrosion resistance in harsh environments.
• Manufacturer Part Number: D400CDKS4-H
• Limited Lifetime Warranty

Fits 1989-1993 Dodge W250 and 1989-1991 Dodge W350 Base models equipped with the Cummins Diesel engine.

The Skyjacker D100CDKS lift system is engineered specifically for the weight requirements of the Cummins-powered Dodge trucks, providing a 1-inch front lift paired with 4-inch rear components to achieve a leveled, more aggressive stance. This system improves ground clearance and off-road capability without sacrificing the factory ride quality or handling characteristics required for heavy-duty applications.

Built for longevity, all major components are finished in a durable black powder coating to resist corrosion in harsh environments. The kit includes all necessary mounting hardware and comprehensive instructions to ensure a precise installation using factory mounting points.

• Specifically tuned for Cummins Diesel engine weight distribution
• 1-inch front lift height with 4-inch rear components
• Black powder-coated finish for maximum corrosion resistance
• Maintains OE-style ride quality and handling
• Complete with all required mounting hardware
• Manufacturer Part Number: D100CDKS
• Limited Lifetime Warranty

Fits select 1968-1973 Chevrolet and GMC K10, K20, K15/K1500, K25/K2500 Pickups and Suburbans, Blazer, and Jimmy models.

The Skyjacker 6-inch System lift kit is designed to provide the height and clearance required for larger tires and aggressive off-road use without compromising street drivability. This comprehensive system is engineered to maintain a smooth, comfortable ride by responding effectively to changing road conditions while improving overall handling. Each component is finished in a durable black powder coat to provide long-lasting resistance against corrosion and the elements.

• Lift Height: 6 inches
• Finish: Durable black powder coating
• Installation: Includes all necessary mounting hardware and detailed instructions
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: C260AKSS

Fits 1968-1972 Chevrolet and GMC K10, K20, K15, and K25 Pickup and Suburban, plus 1969-1972 Blazer and 1970-1972 Jimmy.

The Skyjacker 6-inch suspension lift system (C260AJKS) is engineered to provide the ground clearance required for larger tires and aggressive off-road use while maintaining a smooth, comfortable ride on the pavement. These systems are designed to respond to terrain conditions, offering improved handling and a leveled stance for your classic GM truck or SUV.

Every component in this lift system is precision-engineered and finished with a durable black powder coat to resist corrosion and handle the elements. This comprehensive kit includes the necessary mounting hardware and detailed instructions to ensure a professional-grade installation on your 4WD vehicle.

• Lift Height: 6 inches
• Finish: Black Powder Coated for corrosion resistance
• Components: Includes all necessary mounting hardware
• Manufacturer Part Number: C260AJKS
• Warranty: Limited Lifetime Warranty

Fits select 1968-1999 Chevrolet and GMC Blazer, Tahoe, Jimmy, and K-Series/V-Series trucks.

Skyjacker Softride leaf springs are engineered to provide significant ride quality improvements without sacrificing durability. Constructed from high-grade American steel, each individual leaf undergoes a rigorous shot-peening process using hard steel pellets at high velocity. This method compresses the steel's surface, increasing tensile strength and allowing for maximum wheel travel and flex while extending the service life of the spring.

Unlike traditional designs that use "C" style bend clips which cause binding and friction, the Softride series features bolt-style spring clips to eliminate internal resistance. The leaves are tapered over their entire length to ensure loads are distributed evenly across a greater surface area. This tapering prevents the leaf ends from digging into the material above them, resulting in a smooth, progressive spring rate during articulation.

• Manufacturer Part Number: CR16S
• Construction: Progressive Multi-Leaf Pack
• Material: Shot-Peened American Steel
• Clip Style: Bolt-style clips to eliminate binding
• Load Capacity: Equal to or greater than OE specifications
• Tapered Leaves: Full-length tapering for increased flex and even load distribution

Fits 1980-1997 Ford F-250 and F-350 4WD trucks across all trims including HD, XL, XLT, and Lariat models.

Tuff Country 82350 add-a-leafs are a cost-effective suspension upgrade designed to increase the rear ride height and load-carrying capacity of your Ford truck. These leaves integrate directly into your vehicle's existing factory leaf spring packs, providing approximately 3 inches of lift while reinforcing the spring rate. This is an ideal solution for compensating for rear-end sag or for trucks equipped with heavy accessories such as winches, utility beds, or snowplows.

• Provides approximately 3 inches of additional rear lift height
• Increases rear payload capacity and restores spring arch
• Bolts directly to existing factory leaf spring stacks
• Durable steel construction designed for heavy-duty use
• Includes necessary center pins for a complete installation
• Sold as a pair (left and right)
• Manufacturer Part Number: 82350

Fits select 1980-2022 Ford Bronco, F-150, F-250, F-250 HD, and F-350 models equipped with 3-inch wide leaf springs.

Tuff Country Add-a-Leafs (MPN 82250) provide a cost-effective solution for adding approximately 2 inches of rear lift to your vehicle. These leaves are designed to integrate with your existing factory leaf spring packs, offering a modest height increase and improved payload capacity. They are an ideal choice for vehicles frequently carrying heavy loads or equipped with front-end accessories like winches or snowplows that cause rear-end sagging.

• Provides approximately 2 inches of additional rear lift height
• Increases rear payload capacity for heavy-duty applications
• Compatible with factory 3-inch wide leaf spring assemblies
• Includes necessary center pins for a complete installation
• Economical alternative to full replacement leaf spring packs
• Manufacturer Part Number: 82250

Fits 1987-1995 Jeep Wrangler YJ models, including Base, Sahara, Sport, Renegade, SE, S, Laredo, Islander, and Rio Grande.

Restore the factory ride height and suspension geometry of your YJ with this comprehensive OE-style leaf spring kit from Omix. Designed as a direct-fit solution for aging or sagging factory springs, this kit provides a complete refresh for your vehicle's leaf spring suspension system without the need for custom fabrication. The kit features application-specific leaf counts to maintain proper weight distribution and handling characteristics.

• Complete kit for front and rear suspension refresh
• Includes (2) 4-leaf front springs and (2) 6-leaf rear springs
• Includes (4) complete shackle assemblies with bushings
• Includes mounting U-bolts and necessary installation hardware
• OE-style construction for direct-fit compatibility
• Limited 5-year manufacturer warranty
• Manufacturer Part Number: 18290.13

Note: This kit is designed to utilize your existing shocks or new standard-length replacements, as shock absorbers are not included.

Fits select 1969-2014 Toyota 4Runner, Pickup, and Hi-Lux models.

The ARB Old Man Emu (OME) Dakar Front Leaf Spring is a heavy-duty suspension upgrade engineered to provide consistent ride performance regardless of terrain or load. Designed as part of an integrated 4X4 suspension system, these springs replace fatigued factory components to improve handling and load-carrying capability. Each leaf pack is manufactured with precision, utilizing shot peening to reduce internal stress and a full scragging process to prevent future sagging. The design incorporates draw-tapered and diamond-cut leaves to ensure even load distribution and a smoother ride during articulation.

• Manufacturer Part Number: CS009FB
• Military Wrap: Provides a secondary safety attachment point by wrapping around the spring eye.
• Interleaf Anti-Friction Pads: Re-greasable nylon pads reduce friction at the leaf tips for quieter operation.
• Flat Axle Seat: Allows for a secure, positive axle mount that minimizes spring stress.
• Bolted Leaf Clamps: Features bolted clamps to maintain leaf alignment and accommodate anti-squeak liners.
• Shot Peened & Scragged: Specialized manufacturing treatments increase the fatigue life and durability of the spring steel.

Fits 1969-1985 Toyota Hi-Lux, Pickup, and 4Runner. This ARB Old Man Emu (OME) Dakar front leaf spring is a heavy-duty suspension upgrade engineered to provide superior ride quality and load-carrying capability regardless of the terrain. Designed as part of an integrated 4x4 suspension system, the CS008FA replaces worn factory springs with a multi-leaf pack built for durability and consistent performance.

• Military Wrap Design: Enhances safety by providing an additional point of contact around the spring eye.
• Shot Peened & Scragged: Each spring is shot peened to reduce internal stress and fully scragged to ensure the pack maintains its height without sagging.
• Reduced Friction: Features re-greasable nylon interleaf anti-friction pads at the tips and diamond-cut leaves to minimize friction and prevent squeaking.
• Secure Mounting: A flat axle seat area provides a positive, safe mounting surface, significantly reducing localized spring stress.
• Bolted Clamps: Utilizes bolted leaf clamps to allow for the installation of anti-squeak nylon liners, further refining ride comfort.
• Manufacturer Part Number: CS008FA

Fits 1987-1995 Jeep Wrangler YJ models including Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport.

Enhance the stance and off-road capability of your Jeep Wrangler YJ with this pair of Zone Offroad 4-inch lift leaf springs. These springs are engineered for durability and reliable ride height, featuring a heavy-duty 5-leaf pack design. To ensure maximum safety during articulation, these springs utilize military wrapped ends, providing a secondary layer of protection to keep the main leaf secured to the chassis mounts.

• Manufacturer Part Number: ZONJ0400
• Construction: 5-leaf spring pack with military wrapped ends
• Sold as a pair (2 leaf springs)
• Lift Height: 4 inches

Note on Installation: Bushings (Part # J7000) are not included and must be added to your order separately. If you are installing these 4-inch springs on a vehicle without existing driveline modifications (such as an SYE/CV driveshaft or motor mount lift), it is necessary to install 4-degree rear shims (Part # U3001), a center pin kit (Part # U3010), and a transfer case drop kit (Part # J5003) to maintain proper driveline angles and prevent vibration.

Fits 1984-2001 Jeep Cherokee (XJ) models including Base, Sport, Limited, and SE.

Designed to improve ride quality and suspension performance, this Zone Offroad 3-inch rear leaf spring features a heavy-duty 5-leaf pack construction. By incorporating anti-friction pads and center leaf spacer plates between each leaf, internal friction is significantly reduced. This design allows for smoother cycling and maximized compression travel, which directly translates to increased wheel travel and better off-road articulation.

• 3-inch lift height for rear suspension
• Heavy-duty 5-leaf pack design
• Anti-friction pads and spacer plates included to reduce squeaking and binding
• Maximized compression travel for improved off-road performance
• Manufacturer Part Number: ZONJ0308
• Sold individually; bushings are required and sold separately

Vehicle Fitment:

Fits 2008-2015 Ford F-250 and F-350 Super Duty (4WD/2WD) models including XL, XLT, Lariat, and King Ranch trims.

Restore sagging rear suspension or gain additional lift for towing and hauling with the Zone Offroad Dual Add-A-Leaf kit. Unlike standard single-leaf kits that can create a harsh ride, this dual-leaf system uses two longer, thinner leaves per side. This design provides a more progressive spring rate, maintaining factory-like ride quality while increasing rear ride height and load support.

The ZONF6209 kit is engineered to bolt directly into the factory leaf pack. It includes all necessary hardware to ensure a secure installation, featuring extended center pins to accommodate the additional leaf thickness and alignment clamps to maintain pack integrity under load.

• Manufacturer Part Number: ZONF6209
• Design: Dual add-a-leaf (2 leaves per side)
• Material: High-strength spring steel
• Leaf Profile: Long, thin design for improved flex and ride quality
• Installation: Bolts into factory leaf spring pack
• Included Hardware: (4) Add-a-leafs, (2) extended center pins, and alignment clamps

Fits 1999-2005 Ford F-250/F-350 Super Duty and Ford Excursion (including 4WD models).

Level your front end without compromising ride comfort. The Zone Offroad 5-leaf mini pack is engineered to provide lift through the physical thickness of the leaf stack rather than by forcing a higher arch into your factory springs. This design prevents the stiff, harsh ride often associated with traditional single-leaf add-a-leaf kits, keeping your Super Duty or Excursion handling with OE-style characteristics while providing the clearance you need.

• Lift Height: Approximately 2.5" for Super Duty / 4" for Excursion
• Construction: 5-leaf mini pack stack
• Performance: Maintains factory ride quality and handling
• Manufacturer Part Number: ZONF0202

Fits select 1999-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 models.

The Zone Offroad Rear Add-A-Leaf Kit (ZONC6159) is an effective solution for truck owners looking to increase rear ride height and improve load-carrying capacity. These leafs are designed to be integrated into your vehicle's existing rear leaf packs, providing additional lift and support without creating a harsh, unmanageable ride quality during daily driving. This kit is ideal for leveling out your truck's stance or compensating for heavy bed loads and towing applications.

• Increases rear lift height and load capacity
• Maintains factory-style ride quality
• Includes alignment clamps to prevent leaf shifting
• Provides necessary center pins for secure installation
• Replaces or augments factory leaf spring components
• Manufacturer Part Number: ZONC6159

Kit Includes: One pair of rear add-a-leafs, two center pins, and alignment clamps.

Fits select 1973-1991 Chevrolet and GMC K-Series (K10/K20/K15/K25), V-Series (V10/V20/V1500/V2500), Suburban, Blazer, and Jimmy models. This 4-inch lift front leaf spring is engineered to restore height or provide additional clearance while maintaining factory ride quality.

Construction features a 5-leaf pack designed for durability and consistent performance. To ensure quiet and smooth operation, Zone Offroad incorporates anti-friction pads and center leaf spacer plates between each leaf. This design reduces internal friction, preventing the squeaking and harshness often associated with heavy-duty leaf packs.

• Provides 4" of suspension lift
• 5-leaf pack configuration for optimal support
• Includes anti-friction pads for quiet operation
• Center leaf spacer plates reduce internal friction and wear
• Direct replacement for factory front leaf springs
• Manufacturer Part Number: ZONC0401

Note: Springs are sold individually. Bushings are required for installation and are sold separately.

Fits 1967-1981 Chevrolet Camaro and Pontiac Firebird models.

The UMI Performance 2625 polyurethane leaf spring shackle kit is designed as a heavy-duty replacement for worn factory hardware in street and performance applications. These shackles are laser-cut for precise fitment and provide a rigid foundation for the rear suspension, working seamlessly with original leaf spring locations or UMI P/N 2620 rear leaf springs.

To improve handling consistency and reduce deflection, this kit utilizes high-quality polyurethane bushings for both the leaf spring and chassis mounts. The assembly is secured with Grade 8 hardware to ensure maximum durability under load. This kit is a direct bolt-on solution for F-body owners looking to restore suspension geometry and improve rear axle stability.

• Precision laser-cut steel shackles
• High-durometer polyurethane bushings for leaf and chassis sides
• Includes all necessary Grade 8 mounting hardware
• Compatible with stock location leaf springs and UMI 2620 springs
• Made in the USA
• Manufacturer Part Number: 2625

Fits select 1967-1981 Chevrolet Camaro, Pontiac Firebird, and 1969-1974 Chevrolet Nova.

The UMI Performance 2620 Rear Leaf Spring Set is a high-performance suspension solution engineered to lower the center of gravity while improving handling response. Manufactured from premium US Steel, these springs utilize a multi-leaf construction to provide a consistent 2-inch to 2.5-inch drop below stock ride height. Designed as a direct bolt-in replacement, they install into factory mounting points without the need for modifications.

To ensure ride comfort and quiet operation, the front eyelets come equipped with pre-installed rubber bushings. The rear eyelets are delivered bare, allowing for the re-use of factory bushings or an upgrade to high-performance alternatives, such as UMI’s 2625 polyurethane or 2626 Delrin bushing and shackle kits.

• Manufacturer Part Number: 2620
• Lowering Range: 2.0 to 2.5 inches below stock height
• Material: High-quality US Steel construction
• Spring Type: Multi-leaf design
• Front Bushing: Pre-installed rubber eyelet bushing
• Compatibility: Fits GM F-Body and X-Body platforms
• Installation: Direct bolt-on to factory locations

Fits select 1999-2007 Ford F-250 and F-350 Super Duty trucks.

As part of ARB's integrated 4x4 suspension systems, Old Man Emu Emu Dakar leaf springs are engineered to provide optimum ride performance regardless of the terrain or load. Designed to replace worn factory springs, these leaf packs offer a significant upgrade in handling and load-carrying capacity for both recreational and commercial use. The construction features draw-tapered and diamond-cut leaves to ensure even load distribution and reduced stress at the leaf ends.

• Durable Construction: Shot-peened to reduce internal stress and fully scragged to prevent sagging over time.
• Safety and Strength: Military wrap design provides an additional layer of security by wrapping the second leaf around the spring eye.
• Reduced Friction: Re-greasable nylon interleaf anti-friction pads at the leaf tips minimize noise and wear.
• Optimized Ride: Two-stage leaf pack design provides comfort when the vehicle is unladen while maintaining support under heavy loads.
• Secure Mounting: A flat axle seat area ensures a positive, safe mount to the axle, reducing spring stress during articulation.
• Serviceable Design: Bolted leaf clamps allow for the installation of anti-squeak nylon liners for quieter operation.

Includes one rear leaf spring (Manufacturer Part Number: CS048R). For best performance, pair with Old Man Emu 4x4 shock absorbers.

Tuff Country extended leaf spring center pins are engineered to replace factory hardware when modifying your vehicle's suspension with extra leaves or add-a-leaf kits. These 3/8-inch diameter pins provide the necessary shank length to securely clamp the leaf pack together, ensuring proper alignment and preventing shifting within the spring assembly.

• Extended length designed specifically for add-a-leaf installations and custom leaf packs
• 3/8" diameter pins for heavy-duty leaf spring applications
• Includes two (2) center pins and two (2) matching hex nuts
• High-strength steel construction for reliable tension and durability
• Manufacturer Part Number: 92038

Fits select 2007-2022 Toyota Tundra (Base, SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Capstone, Nightshade, and Trail).

Tuff Country add-a-leafs provide a reliable, cost-effective solution for lifting vehicles equipped with leaf springs. These components are designed to be integrated into your existing factory leaf spring packs to provide approximately 2 inches of rear lift. This kit is an excellent choice for Tundra owners looking to compensate for heavy loads or front-mounted accessories like winches and snowplows.

Beyond the increased ride height, these add-a-leafs enhance the vehicle's payload capacity, helping to reduce rear-end sag during towing or hauling. Each kit includes the necessary center pins to ensure a secure installation to the original spring assembly.

• Provides approximately 2 inches of rear lift height
• Mounts directly to existing factory leaf spring packs
• Increases rear payload capacity and improves load handling
• Ideal for trucks equipped with winches or heavy equipment
• Includes necessary center pins for installation
• Sold as a pair (driver and passenger side)
• Manufacturer Part Number: 85750

Fits 1979-2004 Toyota Pickup and Tacoma (Base, SR5, DLX, and Limited models).

The Tuff Country 85250 Rear Add-a-Leaf Kit provides a reliable and economical solution for lifting the rear of your Toyota truck by approximately 2 inches. These leaves are designed to be installed into your existing OE leaf spring packs to restore arch, level the vehicle, or increase payload capacity—making them ideal for trucks equipped with heavy accessories like winches, campers, or snowplows. By adding support to the factory leaf stack, this kit helps minimize rear-end sag under load without the expense of full replacement spring packs.

• Provides approximately 2 inches of additional rear lift height
• Increases rear payload capacity and improves load handling
• Mounts directly to existing factory leaf spring packs
• Includes two (2) center pins for a complete installation
• Sold as a pair (set of 2)
• Manufacturer Part Number: 85250