Fits 1999-2024 Ford F-250 and 1999-2023 F-350 Super Duty trucks.

The Tuff Country 83950 Rear Add-a-Leaf Kit provides an economical way to lift your Super Duty and increase rear payload capacity. These leaf springs are engineered to be installed into your existing factory leaf packs, making them an ideal solution for trucks frequently carrying heavy loads, or those equipped with rear-mounted equipment that require additional support. By adding these leaves to the factory stack, you gain height without the cost of a full replacement leaf pack.

• Provides approximately 3 inches of rear lift height
• Increases rear payload capacity for heavy-duty hauling and towing
• Bolts directly to existing factory leaf springs for straightforward installation
• Includes necessary center pins for secure mounting
• Cost-effective alternative to complete replacement leaf packs
• Sold as a pair
• Manufacturer Part Number: 83950

Fits select 2009-2024 Ford F-150, F-250/F-350 Super Duty, Expedition, and Explorer models.

The Tuff Country 82550 Add-a-Leaf kit provides an economical and effective solution for lifting vehicles equipped with rear leaf springs. Designed to be integrated into your existing factory leaf packs, these springs provide approximately 1.5 inches of additional rear height while increasing the vehicle's payload capacity. This makes them an ideal choice for trucks and SUVs equipped with heavy accessories like winches or snowplows, helping to eliminate sagging and restore a level stance under load.

• Product Function: Adds 1.5 inches of lift to the rear suspension and increases payload capacity.
• Construction: High-quality steel leaf springs designed for long-term durability.
• Installation: Mounts directly to the existing factory leaf spring pack.
• Included Hardware: Comes as a pair and includes the necessary center pins for installation.
• Part Number: 82550

Fits 2003-2024 Dodge Ram 2500 and Ram 3500 4WD models.

Tuff Country Add-a-Leafs provide an economical solution for restoring ride height or adding a 1.5-inch lift to your truck's rear suspension. These leaf springs are engineered to integrate directly into your existing factory leaf pack, increasing the spring rate to help compensate for heavy equipment such as winches or snowplows and improving overall payload capacity.

By mounting to the original leaf springs, this pair of Add-a-Leafs helps eliminate rear-end sag under load while maintaining suspension integrity. This is a reliable upgrade for drivers who require additional support for towing or hauling without the expense of a full replacement leaf pack.

• Provides approximately 1.5 inches of additional rear lift height
• Increases rear spring rate and payload capacity
• Installs directly into existing factory leaf packs
• Includes new center pins for a secure installation
• Suitable for heavy-duty applications including plowing and towing
• Manufacturer Part Number: 82450

Fits select 1980-2004 Ford F-250 and F-250 Super Duty 4WD models.

Tuff Country add-a-leafs provide an economical solution for lifting leaf-sprung vehicles without replacing the entire spring pack. These components are designed to be installed into your existing factory leaf spring stacks, providing 1.5 inches of front-end lift. This additional height helps level the vehicle and provides necessary clearance for trucks equipped with heavy front-end accessories such as winches or snowplows.

Beyond the lift height, these add-a-leafs increase the front spring rate, which helps restore ride height and improves payload capacity. Each kit is manufactured to precise tolerances for a reliable fit and includes the necessary center pins for a straightforward installation.

• Manufacturer Part Number: 82112
• Lift Height: 1.5 Inches
• Position: Front
• Quantity: Pair (Set of 2)
• Includes: Center pins for installation
• Application: Ideal for vehicles with heavy front-end equipment
• Function: Increases payload capacity and restores ride height

Fits select 1999-2024 Chevrolet Silverado 1500, GMC Sierra 1500, and 2006-2009 Hummer H3 models.

The Tuff Country 81350 Add-a-Leaf kit provides an efficient and economical way to lift your vehicle's rear suspension by 2 inches. These leaves are designed to be integrated into your existing factory leaf packs, offering a modest lift while helping to restore ride height or compensate for heavy loads. This kit is an ideal solution for vehicles equipped with heavy accessories like winches, service bodies, or snowplows that require additional support to prevent sagging.

• Lift Height: 2-inch rear lift
• Enhanced Support: Increases payload capacity and reduces rear-end sag under load
• Installation: Mounts directly to existing factory leaf springs
• Hardware Included: Includes necessary center pins for a complete installation
• Application: Compatible with 2WD and 4WD 1500-series trucks
• MPN: 81350

Fits 1955-1975 Jeep CJ5 and CJ6, and Willys CJ-5 and CJ-6 models.

The Skyjacker SOFTRIDE 2-2.5-inch suspension lift kit is engineered to provide the ground clearance needed for larger tires and improved approach angles without sacrificing on-road comfort. Unlike traditional stiff lift springs, the SOFTRIDE series uses a specialized leaf design that maintains flexibility and responds accurately to trail conditions while preserving a smooth ride on the highway.

• Lift Height: 2-2.5 inches
• Finish: Black powder-coated components to resist rust and corrosion
• Series: SOFTRIDE Leaf Spring Technology
• Included Hardware: All necessary mounting hardware and detailed instructions
• Manufacturer Part Number: J32K
• Warranty: Limited Lifetime Warranty

Each kit is designed to bolt directly into the factory mounting locations, replacing aged or sagging OE leaf springs to restore vehicle height and improve handling characteristics. Note that additional components may be required for a complete suspension system overhaul depending on your specific vehicle's condition.

Fits select 1969-1985 Toyota Hi-Lux, Pickup, and 4Runner models.

Old Man Emu Dakar leaf springs are engineered as part of ARB's integrated 4x4 suspension systems to provide superior ride performance and load-carrying capability. Unlike standard factory springs, these Dakar units utilize a specific multi-leaf design to handle the stresses of off-road terrain and varying payloads while maintaining a controlled, comfortable ride.

• Military Wrap: Provides an additional layer of safety by wrapping the second leaf around the main spring eye.
• Anti-Friction Pads: Re-greasable nylon interleaf pads reduce friction and noise at the leaf tips.
• Shot Peened & Scragged: Each spring is shot peened to reduce stress and fully scragged to prevent sagging over time.
• Precise Geometry: Features draw-tapered and diamond-cut leaves for better load distribution and a flat axle seat area for a secure, positive mount.
• Serviceable Design: Bolted leaf clamps allow for the installation of anti-squeak nylon liners to ensure quiet operation.

Manufacturer Part Number: CS008FB

Fits 1987-1995 Jeep Wrangler YJ (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport).

The Skyjacker Double Wrap rear leaf spring is engineered to provide reliable suspension performance and enhanced durability for YJ platforms. The double-wrap design reinforces the spring eye, providing an extra layer of strength and security against main leaf failure during off-road articulation. This spring is a direct-fit solution designed to restore ride quality and maintain proper suspension geometry.

• Double-wrap rear eye design for increased durability and safety
• Direct fit for 1987-1995 Jeep Wrangler YJ models
• Engineered for rear axle applications
• Manufacturer Part Number: YJ45RS
• Includes Limited Lifetime Warranty

Fits 1987-1995 Jeep Wrangler YJ (Base, Sahara, Sport, Laredo, Islander, Renegade, Rio Grande, S, and SE).

The Skyjacker Sport Lift Kit provides 4 inches of suspension lift, giving your Jeep Wrangler YJ the clearance needed for larger tires and improved approach angles. This complete kit is engineered to maintain comfortable ride quality during daily driving while delivering the articulation and durability required for off-road trails. The system includes a set of four Skyjacker Hydro shocks, specifically valved for this application to provide consistent damping and controlled handling.

• 4.0-inch lift height for increased ground clearance and larger tire fitment.
• Includes four Skyjacker Hydro shocks for improved damping and ride control.
• Direct-fit design compatible with 1987-1995 Jeep YJ leaf spring configurations.
• Comes with all necessary mounting hardware and detailed installation instructions.
• Manufacturer Part Number: YJ41BKH

Fits 1987-1995 Jeep Wrangler YJ (Base, Sahara, Sport, SE, and other submodels).

Skyjacker Softride leaf springs are engineered to provide superior ride quality and increased wheel travel without sacrificing the durability expected of a Jeep YJ. Each leaf spring is manufactured from high-grade American steel and undergoes a rigorous shot-peening process. By hitting the steel with high-velocity pellets, the surface is compressed, significantly increasing the tensile strength and preventing the sagging or fatigue common in lesser springs.

These progressive multi-leaf packs feature tapered leaf ends to distribute loads more evenly across the entire length of the spring, allowing for smoother flex and preventing leaves from digging into one another. To further reduce binding and internal friction, Skyjacker utilizes bolt-style spring clips rather than restrictive cinch-style clips, ensuring your suspension reacts quickly to trail obstacles and road imperfections.

• Construction: Progressive multi-leaf pack made with American steel
• Finish: Shot-peened surface for maximum tensile strength and longevity
• Design: Tapered leaf ends for even load distribution and enhanced flex
• Hardware: Friction-reducing bolt-style spring clips
• Capacity: Equal to or greater than OE load ratings
• Warranty: Limited Lifetime Warranty
• Part Number: YJ40RSB

Fits 1987-1995 Jeep Wrangler YJ (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport).

Skyjacker Softride leaf springs are engineered to provide a significant upgrade over stock YJ suspension, prioritizing ride quality without sacrificing off-road durability. These progressive multi-leaf packs are manufactured using high-grade American steel and undergo a specialized shot-peening process. By bombarding the steel with high-velocity pellets, Skyjacker compresses the surface to increase tensile strength, allowing for maximum wheel travel and a longer service life compared to non-peened alternatives.

Unlike standard designs that use restrictive bend clips, Softride springs feature bolt-style spring clips to eliminate internal friction and binding. Each leaf is tapered along its entire length to ensure even load distribution and smoother flex at the leaf ends, preventing individual leaves from digging into the pack. This design results in a more compliant ride on the street and better articulation on the trail.

• Manufacturer Part Number: YJ40FSB
• Material: Shot-peened American steel for increased tensile strength
• Construction: Progressive multi-leaf pack design
• Hardware: Friction-reducing bolt-style spring clips
• Load Capacity: Equal to or greater than OE specifications
• Installation: Replaces factory leaf spring
• Warranty: Limited Lifetime Warranty

Fits 1987-1995 Jeep Wrangler (YJ) including Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport submodels.

Skyjacker Softride springs are engineered to provide a significant improvement in ride quality without compromising durability. Each spring is constructed from high-grade American steel and features individual leaves that are shot-peened with hard steel pellets at high velocities. This process compresses the steel surface, increasing tensile strength and allowing for maximum wheel travel and flex while extending the service life of the spring pack.

Unlike standard designs that use restrictive C-style bend clips which cause binding and friction, Skyjacker utilizes bolt-style spring clips to allow the leaves to move more freely. Each leaf is tapered over its entire length to distribute loads evenly and prevent the leaf ends from digging into one another, resulting in a more progressive and predictable suspension response.

• Manufacturer Part Number: YJ20RSB
• Construction: Progressive multi-leaf packs
• Material: Shot-peened American steel
• Hardware: Friction-reducing bolt-style spring clips
• Design: Fully tapered leaves for even load distribution
• Capacity: Equal to or greater than OE load ratings
• Warranty: Limited Lifetime Warranty

Fits 1987-1995 Jeep Wrangler (YJ) models.

The Skyjacker Softride Leaf Spring is engineered to deliver improved ride quality and maximum wheel travel without compromising durability. Unlike standard springs, Softride packs are constructed from high-grade American steel and utilize a specialized shot-peening process. By bombarding the steel surface with high-velocity pellets, the material is compressed to increase tensile strength and significantly extend the service life of the spring pack. The progressive multi-leaf design ensures load capacity meets or exceeds OE specifications while providing a smoother response over varying terrain.

To prevent binding and friction, Skyjacker utilizes bolt-style spring clips rather than traditional cinch-style clips. Each leaf is tapered across its entire length to allow for greater flex at the leaf ends and more even load distribution, which prevents individual leaves from digging into the pack under compression. This design results in a suspension component that handles technical trails and street driving with equal composure.

• Constructed from high-tensile American steel
• Shot-peened surface for increased fatigue resistance and tensile strength
• Progressive multi-leaf pack design for consistent performance
• Bolt-style spring clips eliminate friction and binding
• Tapered leaf ends for enhanced flex and even weight distribution
• Load capacity equal to or greater than OE
• Manufacturer Part Number: YJ20FSB
• Limited Lifetime Warranty

Fits 2007-2017 Toyota Tundra (Base, SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro).

The Skyjacker Softride Leaf Spring (TUR47S) is engineered to deliver a balance of vigorous off-road handling and smooth street performance. Utilizing proprietary Softride Technology, these springs address the harshness common in heavy-duty leaf packs without sacrificing load-carrying capabilities. Each pack is constructed from high-quality American steel as a progressive multileaf unit, allowing the spring to react to small bumps for ride comfort while providing enough rate to handle significant suspension articulation.

• Constructed from durable American steel for long-lasting resilience
• Progressive multileaf design ensures a smooth ride on-road and control off-road
• Bolt-style spring clips reduce inter-leaf friction for better cycling
• Load capacity meets or exceeds original equipment specifications
• Manufacturer Part Number: TUR47S
• Includes limited lifetime warranty

Fits select 1980-1989 Toyota 4Runner and Pickup (DLX, SR5, Base, and Turbo models).

Skyjacker Softride leaf springs are engineered to provide a smooth, comfortable ride without sacrificing the durability required for off-road performance. Each leaf is constructed from high-quality American steel and undergoes a high-velocity shot-peening process with hard steel pellets. This technique compresses the steel's surface, significantly increasing tensile strength and allowing for maximum wheel travel without compromising the spring's service life.

These progressive multi-leaf packs feature a tapered design over the entire length of the leaf, which distributes loads evenly and reduces friction between individual leaves. Unlike standard C-style bend clips that can cause binding, Skyjacker utilizes bolt-style spring clips to ensure consistent movement and flex.

• Manufacturer Part Number: TR60S
• Construction: Progressive multi-leaf pack
• Material: American steel
• Process: Shot-peened for increased tensile strength and longevity
• Design: Tapered leaf ends for improved flex and load distribution
• Clips: Bolt-style spring clips to eliminate binding and friction
• Load Capacity: Equal to or greater than OE
• Warranty: Limited Lifetime Warranty

Fits select 1989-1997 Toyota Pickup and Tacoma 4WD models.

The Skyjacker Softride leaf spring is engineered to deliver improved ride quality and off-road flex without compromising the durability of your suspension. Each spring is manufactured using high-grade American steel that undergoes a specialized shot-peening process. By impacting the steel with high-velocity pellets, the surface is compressed to increase tensile strength, allowing for greater wheel travel and a longer service life compared to standard springs.

These progressive multi-leaf packs feature a tapered design across the entire length of the leaf, which distributes loads more evenly and prevents individual leaves from digging into each other. To further reduce friction and prevent binding, Skyjacker utilizes bolt-style spring clips rather than traditional bend-over clips, ensuring smooth suspension cycling throughout its range of motion.

• Manufacturer Part Number: TR49S
• Series: Softride
• Material: American-made steel construction
• Process: Shot-peened surface for maximum tensile strength
• Design: Tapered progressive multi-leaf pack
• Clips: Bolt-style spring clips to eliminate friction and binding
• Capacity: Meets or exceeds OE load capacity
• Warranty: Limited Lifetime Warranty

Fits select 1980-1989 Toyota Pickup and 4Runner 4WD models (Base, DLX, SR5, and Turbo).

Skyjacker Softride leaf springs are engineered to provide a smooth, consistent ride without sacrificing durability. Each spring is constructed from high-grade American steel and features individual leaves that undergo a high-velocity shot-peening process. This compresses the steel's surface to increase tensile strength, allowing for maximum wheel travel and extended service life. Unlike standard springs that use binding C-style clips, Skyjacker utilizes bolt-style spring clips to eliminate friction and ensure smooth movement.

The progressive multileaf design features tapering over the entire length of the leaf. This specific geometry creates more flex at the leaf ends and distributes loads evenly across a larger surface area, preventing leaves from digging into one another. The result is a spring pack that maintains a load capacity equal to or greater than OE while significantly improving off-road articulation and on-road comfort.

• MPN: TR40S
• Material: Shot-peened American steel
• Design: Progressive multileaf pack with tapered ends
• Hardware: Bolt-style spring clips to reduce friction
• Fitment: Specific to 4WD 1980-1989 Toyota models
• Warranty: Limited Lifetime Warranty

Fits select 1980-1989 Toyota 4Runner and Pickup models.

Upgrade your vehicle's suspension with the Skyjacker Softride leaf spring (MPN TR20S). Engineered for superior ride quality and maximum wheel travel, these springs are constructed from high-grade American steel and designed to meet or exceed original equipment load capacities. Each leaf is shot-peened with high-velocity steel pellets to compress the surface, significantly increasing tensile strength and extending the service life of the spring pack.

Unlike standard designs that use restrictive bend clips, Skyjacker Softride springs utilize bolt-style spring clips to eliminate friction and binding. The leaves feature a full-length taper to distribute loads more evenly and provide greater flex at the ends, preventing individual leaves from digging into one another during compression.

• Manufacturer Part Number: TR20S
• Construction: Progressive multi-leaf pack
• Material: Shot-peened American steel
• Hardware: Bolt-style spring clips for reduced friction and binding
• Design: Tapered leaf ends for increased flex and even load distribution
• Warranty: Limited Lifetime Warranty

Fits 2016-2022 Toyota Tacoma Limited, SR, SR5, Trail, TRD Off-Road, and TRD Sport models.

Skyjacker Softride leaf springs are engineered to improve off-road handling while maintaining comfortable street manners. Manufactured from American steel, the TCR620S features a 2-inch lift height and utilizes Softride technology to ensure proper suspension geometry and increased wheel travel.

The design incorporates leaf tapering throughout the entire length of the spring to distribute loads evenly and reduce friction at the spring ends, resulting in a smoother ride and increased flex. To further enhance durability, each spring undergoes a shot-peening process to increase tensile strength and prevent fatigue. Integrated Teflon wear pads between the leaves eliminate friction and noise during operation.

• Material: High-grade American steel construction
• Lift Height: 2 inches (Rear)
• Tensile Strength: Shot-peened finish for increased durability and resistance to fatigue
• Friction Management: Tapered leaves and Teflon wear pads reduce internal friction
• Spring Clips: Bolt-style clips prevent leaf binding for maximum wheel travel
• Load Capacity: Engineered to meet or exceed OEM carrying capacity
• MPN: TCR620S (Sold individually)

Fits 2016-2022 Toyota Tacoma Limited, SR, SR5, Trail, TRD Off-Road, and TRD Sport.

Skyjacker Softride rear leaf springs (TCR620) are engineered to provide a 2-inch lift while maintaining the smooth street ride characteristics your daily driver demands without sacrificing off-road flexibility. These springs are manufactured using American steel and feature a tapered design across the entire length of the leaf. This tapering reduces friction at the spring ends and distributes weight more evenly across the leaf area, resulting in a more predictable ride and increased wheel travel.

To ensure maximum durability, these springs undergo an advanced shot-peening process to increase tensile strength and resist fatigue. Friction and binding are further minimized through the use of Teflon wear pads between the leaves and bolt-style spring clips. These components work together to eliminate the noise and stiffness often found in aftermarket leaf packs, ensuring your Tacoma maintains proper suspension geometry and a carrying capacity equal to or greater than the original equipment.

• Lift Height: 2 inches
• Material: American steel construction
• Shot-peened for increased tensile strength and durability
• Tapered leaf design for improved flex and load distribution
• Teflon wear pads between leaves eliminate friction and noise
• Bolt-style spring clips prevent leaf binding
• Maintains factory load capacity
• Manufacturer Part Number: TCR620

Fits 2005-2018 Toyota Tacoma models, including Base, Pre Runner, X-Runner, and TRD editions.

Skyjacker Softride leaf springs are engineered to provide a significant improvement in ride quality without sacrificing load-carrying capacity. Each spring is manufactured using high-grade American steel and undergoes a rigorous shot-peening process. By hitting the steel with high-velocity pellets, the surface is compressed to increase tensile strength and extend the service life of the spring pack under heavy cycling.

Unlike standard leaf springs that use "C" style bend clips—which can cause binding and friction—the Softride series features bolt-style spring clips to eliminate movement restriction. The individual leaves are tapered over their entire length to ensure even load distribution and maximum flexibility at the leaf ends, preventing individual leaves from digging into the spring above them during suspension travel.

• Manufacturer Part Number: TCR515S
• Construction: Progressive multileaf pack
• Material: Shot-peened American steel
• Hardware: Bolt-style spring clips for reduced friction
• Load Capacity: Equal to or greater than OE specifications
• Warranty: Limited Lifetime Warranty

Fits 1998-2004 Toyota Tacoma models including Base, Limited, Pre Runner, and SR5.

Skyjacker Softride leaf springs are engineered to provide a significant upgrade over factory suspension, focusing on both ride quality and long-term durability. These progressive multileaf packs are constructed using high-quality American steel. Each individual leaf undergoes a specialized shot-peening process with hard steel pellets at high velocities. This compresses the steel's surface, increasing tensile strength and allowing for maximum wheel travel without compromising the service life of the spring.

Unlike standard spring designs that use "C" style bend clips—which often cause binding and friction—the Softride series utilizes bolt-style spring clips to eliminate friction and allow for smoother articulation. Each leaf is tapered over its entire length to create more flex at the ends and distribute loads evenly, preventing the leaves from digging into one another under compression.

• Manufacturer Part Number: TCR25S
• Constructed from shot-peened American steel for increased tensile strength
• Progressive multileaf pack design for improved ride quality and handling
• Bolt-style spring clips eliminate friction and binding during articulation
• Tapered leaf ends ensure even load distribution and maximum flex
• Load capacity meets or exceeds OE specifications
• Limited Lifetime Warranty

Fits 1980-1985 Toyota Pickup and 1984-1985 Toyota 4Runner 4WD models. This Skyjacker Softride leaf spring replaces worn OE components with a progressive multileaf pack designed for improved ride quality and maximum wheel travel without sacrificing durability.

Built from high-tensile American steel, each leaf undergoes a specialized shot-peening process. By bombarding the steel with hard steel pellets at high velocities, the surface is compressed to increase tensile strength and extend the life of the spring. Unlike standard designs that use restrictive bend clips, Skyjacker utilizes bolt-style spring clips to eliminate internal friction and binding.

The leaves are tapered over their entire length, allowing for increased flex at the ends and more even load distribution. This design prevents leaves from digging into one another, ensuring smooth articulation and a load capacity that meets or exceeds original equipment specifications.

• Manufacturer Part Number: T307S
• Construction: Progressive Multileaf Pack
• Material: American Steel
• Finish: Shot-peened for increased tensile strength
• Hardware: Bolt-style spring clips to reduce friction
• Design: Fully tapered leaves for even load distribution
• Warranty: Limited Lifetime Warranty

Fits 1980-1985 Toyota Pickup and 1984-1985 Toyota 4Runner 4WD models.

Skyjacker Softride leaf springs are engineered to provide a significant upgrade over factory suspension by focusing on ride quality and wheel travel. Unlike standard springs, Softride packs are constructed from high-quality American steel that undergoes a specialized shot-peening process. By bombarding the steel with hard steel pellets at high velocity, the surface is compressed, significantly increasing tensile strength and extending the service life of the spring under heavy articulation.

These progressive multi-leaf packs feature tapered leaves that distribute loads evenly across the entire length of the spring, reducing friction and preventing leaves from digging into one another. The use of bolt-style spring clips further eliminates the binding common with traditional C-style bend clips, allowing for smoother movement and maximum flex at the leaf ends.

• Shot-peened American steel for superior durability and tensile strength
• Progressive rate design for improved ride quality and handling
• Bolt-style spring clips to prevent friction and binding
• Tapered leaf ends for even load distribution and increased flex
• Load capacity meets or exceeds OE specifications
• Limited Lifetime Warranty
• Manufacturer Part Number: T305S

Fits 1980-1985 Toyota Pickup and 1984-1985 Toyota 4Runner (4WD models).

Skyjacker Softride leaf springs are engineered to provide a significant improvement in ride quality and wheel travel without sacrificing durability. These progressive multi-leaf packs are manufactured using high-grade American steel and undergo a specialized shot-peening process. By bombarding the steel with high-velocity pellets, the surface is compressed to increase tensile strength and extend the service life of the spring.

Unlike standard designs that use restrictive "C" bend clips, Softride springs feature bolt-style spring clips to eliminate binding and friction. Each leaf is tapered along its entire length, allowing for more flex at the ends and preventing the "digging" effect common in non-tapered packs. This design ensures even load distribution and a smoother transition through the suspension cycle while maintaining or exceeding original equipment load capacities.

• Manufacturer Part Number: T303S
• Construction: Progressive multi-leaf pack
• Material: American steel
• Finish: Shot-peened for increased tensile strength
• Hardware: Bolt-style spring clips to reduce friction
• Load Capacity: Equal to or greater than OE
• Warranty: Limited Lifetime Warranty

Fits select 1999-2005 Ford Excursion, F-250, and F-350 Super Duty models.

Restore quiet operation and precise suspension geometry with the Skyjacker SE90F leaf spring bushing. Unlike factory rubber bushings that eventually crack and degrade under load, these polyurethane replacements are designed to withstand the rigors of heavy-duty hauling and off-road articulation. The high-density material maintains its shape better than rubber, ensuring your leaf springs pivot smoothly without the excessive play that leads to alignment issues or clunking.

• Manufactured from durable polyurethane to resist road oils, salt, and environmental debris
• Engineered for smooth, quiet leaf spring articulation and improved stability
• Direct replacement for worn OE bushings in specific Ford Super Duty and Excursion applications
• Manufacturer Part Number: SE90F
• Includes Skyjacker Limited Lifetime Warranty

Fits select 1980-1998 Ford F-250 and 1980-1997 Ford F-350 models (4WD).

Maintain smooth suspension articulation and eliminate the squeaks associated with worn factory rubber components with the Skyjacker Polyurethane Leaf Spring Bushing Set. Polyurethane is a superior alternative to OE rubber, offering increased resistance to road debris, oils, and environmental contaminants that typically cause standard bushings to rot and fail over time. Designed for high-stress off-road and heavy-duty towing applications, these bushings provide the dependability and sturdy performance required for your Ford F-Series truck.

• Replaces worn or degraded factory leaf spring bushings
• High-density polyurethane construction for long-lasting durability
• Improves suspension response and quiet operation
• Engineered for 4-wheel drive Ford F-250 and F-350 applications
• Includes Skyjacker's Limited Lifetime Warranty
• Manufacturer Part Number: SE80F

Fits select 1965-1979 Ford F-250 and F-350 trucks.

Restore smooth suspension articulation and eliminate the squeaks and slop associated with degraded factory rubber components with Skyjacker polyurethane leaf spring bushings. Designed to handle the rigors of both daily driving and off-road use, these bushings provide a more stable pivot point for your leaf springs. Unlike standard rubber, Skyjacker's durable polyurethane is resistant to environmental contaminants such as road salt, oils, and ozone, ensuring your suspension maintains its alignment and performance for the long haul.

• Precision-molded polyurethane construction for maximum durability
• Reduces spring deflection and improves handling response
• Resistant to rot, road chemicals, and compression set
• Direct replacement for worn OE leaf spring bushings
• Manufacturer Part Number: SE70F
• Backed by a Limited Lifetime Warranty

Fits 1987-1995 Jeep Wrangler YJ.

Restore suspension performance and eliminate annoying squeaks with Skyjacker polyurethane leaf spring bushings. These heavy-duty bushings are designed to replace worn-out factory rubber components, providing a more stable mounting point that allows your leaf springs to articulate smoothly and quietly. Unlike standard rubber, high-density polyurethane resists degradation from road contaminants and environmental exposure, maintaining its shape and performance under the stress of off-road articulation and daily driving.

• Manufactured from durable polyurethane for long-lasting service life
• Improves suspension articulation and reduces component binding
• Direct replacement for factory leaf spring bushings
• Resistant to oils, grease, and environmental elements
• Manufacturer Part Number: SE4YJ
• Limited Lifetime Warranty

Fits select 1974-1991 Jeep Cherokee, Wagoneer, Grand Wagoneer, J10, and J20 models.

Replace soft, deteriorated factory rubber with Skyjacker polyurethane leaf spring bushings to restore suspension precision and eliminate unwanted noise. These high-density bushings are designed to withstand the stresses of off-road articulation and heavy loads without the cracking or deformation common in original equipment rubber components.

• Durable Construction: High-quality polyurethane resists oils, road salts, and environmental degradation for a longer service life than rubber.
• Improved Performance: Maintains proper leaf spring alignment to ensure smooth articulation and predictable handling characteristics.
• Reliable Solution: Engineered to provide a dependable, sturdy mounting point that reduces suspension deflection.
• Manufacturer Part Number: SE4JP
• Warranty: Protected by Skyjacker's Limited Lifetime Warranty